1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * PowerNV Platform dependent EEH operations
4 *
5 * Copyright Benjamin Herrenschmidt & Gavin Shan, IBM Corporation 2013.
6 */
7
8 #include <linux/atomic.h>
9 #include <linux/debugfs.h>
10 #include <linux/delay.h>
11 #include <linux/export.h>
12 #include <linux/init.h>
13 #include <linux/interrupt.h>
14 #include <linux/list.h>
15 #include <linux/msi.h>
16 #include <linux/of.h>
17 #include <linux/pci.h>
18 #include <linux/proc_fs.h>
19 #include <linux/rbtree.h>
20 #include <linux/sched.h>
21 #include <linux/seq_file.h>
22 #include <linux/spinlock.h>
23
24 #include <asm/eeh.h>
25 #include <asm/eeh_event.h>
26 #include <asm/firmware.h>
27 #include <asm/io.h>
28 #include <asm/iommu.h>
29 #include <asm/machdep.h>
30 #include <asm/msi_bitmap.h>
31 #include <asm/opal.h>
32 #include <asm/ppc-pci.h>
33 #include <asm/pnv-pci.h>
34
35 #include "powernv.h"
36 #include "pci.h"
37 #include "../../../../drivers/pci/pci.h"
38
39 static int eeh_event_irq = -EINVAL;
40
pnv_pcibios_bus_add_device(struct pci_dev * pdev)41 static void pnv_pcibios_bus_add_device(struct pci_dev *pdev)
42 {
43 dev_dbg(&pdev->dev, "EEH: Setting up device\n");
44 eeh_probe_device(pdev);
45 }
46
pnv_eeh_event(int irq,void * data)47 static irqreturn_t pnv_eeh_event(int irq, void *data)
48 {
49 /*
50 * We simply send a special EEH event if EEH has been
51 * enabled. We don't care about EEH events until we've
52 * finished processing the outstanding ones. Event processing
53 * gets unmasked in next_error() if EEH is enabled.
54 */
55 disable_irq_nosync(irq);
56
57 if (eeh_enabled())
58 eeh_send_failure_event(NULL);
59
60 return IRQ_HANDLED;
61 }
62
63 #ifdef CONFIG_DEBUG_FS
pnv_eeh_ei_write(struct file * filp,const char __user * user_buf,size_t count,loff_t * ppos)64 static ssize_t pnv_eeh_ei_write(struct file *filp,
65 const char __user *user_buf,
66 size_t count, loff_t *ppos)
67 {
68 struct pci_controller *hose = filp->private_data;
69 struct eeh_pe *pe;
70 int pe_no, type, func;
71 unsigned long addr, mask;
72 char buf[50];
73 int ret;
74
75 if (!eeh_ops || !eeh_ops->err_inject)
76 return -ENXIO;
77
78 /* Copy over argument buffer */
79 ret = simple_write_to_buffer(buf, sizeof(buf), ppos, user_buf, count);
80 if (!ret)
81 return -EFAULT;
82
83 /* Retrieve parameters */
84 ret = sscanf(buf, "%x:%x:%x:%lx:%lx",
85 &pe_no, &type, &func, &addr, &mask);
86 if (ret != 5)
87 return -EINVAL;
88
89 /* Retrieve PE */
90 pe = eeh_pe_get(hose, pe_no);
91 if (!pe)
92 return -ENODEV;
93
94 /* Do error injection */
95 ret = eeh_ops->err_inject(pe, type, func, addr, mask);
96 return ret < 0 ? ret : count;
97 }
98
99 static const struct file_operations pnv_eeh_ei_fops = {
100 .open = simple_open,
101 .llseek = no_llseek,
102 .write = pnv_eeh_ei_write,
103 };
104
pnv_eeh_dbgfs_set(void * data,int offset,u64 val)105 static int pnv_eeh_dbgfs_set(void *data, int offset, u64 val)
106 {
107 struct pci_controller *hose = data;
108 struct pnv_phb *phb = hose->private_data;
109
110 out_be64(phb->regs + offset, val);
111 return 0;
112 }
113
pnv_eeh_dbgfs_get(void * data,int offset,u64 * val)114 static int pnv_eeh_dbgfs_get(void *data, int offset, u64 *val)
115 {
116 struct pci_controller *hose = data;
117 struct pnv_phb *phb = hose->private_data;
118
119 *val = in_be64(phb->regs + offset);
120 return 0;
121 }
122
123 #define PNV_EEH_DBGFS_ENTRY(name, reg) \
124 static int pnv_eeh_dbgfs_set_##name(void *data, u64 val) \
125 { \
126 return pnv_eeh_dbgfs_set(data, reg, val); \
127 } \
128 \
129 static int pnv_eeh_dbgfs_get_##name(void *data, u64 *val) \
130 { \
131 return pnv_eeh_dbgfs_get(data, reg, val); \
132 } \
133 \
134 DEFINE_SIMPLE_ATTRIBUTE(pnv_eeh_dbgfs_ops_##name, \
135 pnv_eeh_dbgfs_get_##name, \
136 pnv_eeh_dbgfs_set_##name, \
137 "0x%llx\n")
138
139 PNV_EEH_DBGFS_ENTRY(outb, 0xD10);
140 PNV_EEH_DBGFS_ENTRY(inbA, 0xD90);
141 PNV_EEH_DBGFS_ENTRY(inbB, 0xE10);
142
143 #endif /* CONFIG_DEBUG_FS */
144
pnv_eeh_enable_phbs(void)145 static void pnv_eeh_enable_phbs(void)
146 {
147 struct pci_controller *hose;
148 struct pnv_phb *phb;
149
150 list_for_each_entry(hose, &hose_list, list_node) {
151 phb = hose->private_data;
152 /*
153 * If EEH is enabled, we're going to rely on that.
154 * Otherwise, we restore to conventional mechanism
155 * to clear frozen PE during PCI config access.
156 */
157 if (eeh_enabled())
158 phb->flags |= PNV_PHB_FLAG_EEH;
159 else
160 phb->flags &= ~PNV_PHB_FLAG_EEH;
161 }
162 }
163
164 /**
165 * pnv_eeh_post_init - EEH platform dependent post initialization
166 *
167 * EEH platform dependent post initialization on powernv. When
168 * the function is called, the EEH PEs and devices should have
169 * been built. If the I/O cache staff has been built, EEH is
170 * ready to supply service.
171 */
pnv_eeh_post_init(void)172 int pnv_eeh_post_init(void)
173 {
174 struct pci_controller *hose;
175 struct pnv_phb *phb;
176 int ret = 0;
177
178 eeh_show_enabled();
179
180 /* Register OPAL event notifier */
181 eeh_event_irq = opal_event_request(ilog2(OPAL_EVENT_PCI_ERROR));
182 if (eeh_event_irq < 0) {
183 pr_err("%s: Can't register OPAL event interrupt (%d)\n",
184 __func__, eeh_event_irq);
185 return eeh_event_irq;
186 }
187
188 ret = request_irq(eeh_event_irq, pnv_eeh_event,
189 IRQ_TYPE_LEVEL_HIGH, "opal-eeh", NULL);
190 if (ret < 0) {
191 irq_dispose_mapping(eeh_event_irq);
192 pr_err("%s: Can't request OPAL event interrupt (%d)\n",
193 __func__, eeh_event_irq);
194 return ret;
195 }
196
197 if (!eeh_enabled())
198 disable_irq(eeh_event_irq);
199
200 pnv_eeh_enable_phbs();
201
202 list_for_each_entry(hose, &hose_list, list_node) {
203 phb = hose->private_data;
204
205 /* Create debugfs entries */
206 #ifdef CONFIG_DEBUG_FS
207 if (phb->has_dbgfs || !phb->dbgfs)
208 continue;
209
210 phb->has_dbgfs = 1;
211 debugfs_create_file("err_injct", 0200,
212 phb->dbgfs, hose,
213 &pnv_eeh_ei_fops);
214
215 debugfs_create_file("err_injct_outbound", 0600,
216 phb->dbgfs, hose,
217 &pnv_eeh_dbgfs_ops_outb);
218 debugfs_create_file("err_injct_inboundA", 0600,
219 phb->dbgfs, hose,
220 &pnv_eeh_dbgfs_ops_inbA);
221 debugfs_create_file("err_injct_inboundB", 0600,
222 phb->dbgfs, hose,
223 &pnv_eeh_dbgfs_ops_inbB);
224 #endif /* CONFIG_DEBUG_FS */
225 }
226
227 return ret;
228 }
229
pnv_eeh_find_cap(struct pci_dn * pdn,int cap)230 static int pnv_eeh_find_cap(struct pci_dn *pdn, int cap)
231 {
232 int pos = PCI_CAPABILITY_LIST;
233 int cnt = 48; /* Maximal number of capabilities */
234 u32 status, id;
235
236 if (!pdn)
237 return 0;
238
239 /* Check if the device supports capabilities */
240 pnv_pci_cfg_read(pdn, PCI_STATUS, 2, &status);
241 if (!(status & PCI_STATUS_CAP_LIST))
242 return 0;
243
244 while (cnt--) {
245 pnv_pci_cfg_read(pdn, pos, 1, &pos);
246 if (pos < 0x40)
247 break;
248
249 pos &= ~3;
250 pnv_pci_cfg_read(pdn, pos + PCI_CAP_LIST_ID, 1, &id);
251 if (id == 0xff)
252 break;
253
254 /* Found */
255 if (id == cap)
256 return pos;
257
258 /* Next one */
259 pos += PCI_CAP_LIST_NEXT;
260 }
261
262 return 0;
263 }
264
pnv_eeh_find_ecap(struct pci_dn * pdn,int cap)265 static int pnv_eeh_find_ecap(struct pci_dn *pdn, int cap)
266 {
267 struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
268 u32 header;
269 int pos = 256, ttl = (4096 - 256) / 8;
270
271 if (!edev || !edev->pcie_cap)
272 return 0;
273 if (pnv_pci_cfg_read(pdn, pos, 4, &header) != PCIBIOS_SUCCESSFUL)
274 return 0;
275 else if (!header)
276 return 0;
277
278 while (ttl-- > 0) {
279 if (PCI_EXT_CAP_ID(header) == cap && pos)
280 return pos;
281
282 pos = PCI_EXT_CAP_NEXT(header);
283 if (pos < 256)
284 break;
285
286 if (pnv_pci_cfg_read(pdn, pos, 4, &header) != PCIBIOS_SUCCESSFUL)
287 break;
288 }
289
290 return 0;
291 }
292
pnv_eeh_get_upstream_pe(struct pci_dev * pdev)293 static struct eeh_pe *pnv_eeh_get_upstream_pe(struct pci_dev *pdev)
294 {
295 struct pci_controller *hose = pdev->bus->sysdata;
296 struct pnv_phb *phb = hose->private_data;
297 struct pci_dev *parent = pdev->bus->self;
298
299 #ifdef CONFIG_PCI_IOV
300 /* for VFs we use the PF's PE as the upstream PE */
301 if (pdev->is_virtfn)
302 parent = pdev->physfn;
303 #endif
304
305 /* otherwise use the PE of our parent bridge */
306 if (parent) {
307 struct pnv_ioda_pe *ioda_pe = pnv_ioda_get_pe(parent);
308
309 return eeh_pe_get(phb->hose, ioda_pe->pe_number);
310 }
311
312 return NULL;
313 }
314
315 /**
316 * pnv_eeh_probe - Do probe on PCI device
317 * @pdev: pci_dev to probe
318 *
319 * Create, or find the existing, eeh_dev for this pci_dev.
320 */
pnv_eeh_probe(struct pci_dev * pdev)321 static struct eeh_dev *pnv_eeh_probe(struct pci_dev *pdev)
322 {
323 struct pci_dn *pdn = pci_get_pdn(pdev);
324 struct pci_controller *hose = pdn->phb;
325 struct pnv_phb *phb = hose->private_data;
326 struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
327 struct eeh_pe *upstream_pe;
328 uint32_t pcie_flags;
329 int ret;
330 int config_addr = (pdn->busno << 8) | (pdn->devfn);
331
332 /*
333 * When probing the root bridge, which doesn't have any
334 * subordinate PCI devices. We don't have OF node for
335 * the root bridge. So it's not reasonable to continue
336 * the probing.
337 */
338 if (!edev || edev->pe)
339 return NULL;
340
341 /* already configured? */
342 if (edev->pdev) {
343 pr_debug("%s: found existing edev for %04x:%02x:%02x.%01x\n",
344 __func__, hose->global_number, config_addr >> 8,
345 PCI_SLOT(config_addr), PCI_FUNC(config_addr));
346 return edev;
347 }
348
349 /* Skip for PCI-ISA bridge */
350 if ((pdev->class >> 8) == PCI_CLASS_BRIDGE_ISA)
351 return NULL;
352
353 eeh_edev_dbg(edev, "Probing device\n");
354
355 /* Initialize eeh device */
356 edev->mode &= 0xFFFFFF00;
357 edev->pcix_cap = pnv_eeh_find_cap(pdn, PCI_CAP_ID_PCIX);
358 edev->pcie_cap = pnv_eeh_find_cap(pdn, PCI_CAP_ID_EXP);
359 edev->af_cap = pnv_eeh_find_cap(pdn, PCI_CAP_ID_AF);
360 edev->aer_cap = pnv_eeh_find_ecap(pdn, PCI_EXT_CAP_ID_ERR);
361 if ((pdev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
362 edev->mode |= EEH_DEV_BRIDGE;
363 if (edev->pcie_cap) {
364 pnv_pci_cfg_read(pdn, edev->pcie_cap + PCI_EXP_FLAGS,
365 2, &pcie_flags);
366 pcie_flags = (pcie_flags & PCI_EXP_FLAGS_TYPE) >> 4;
367 if (pcie_flags == PCI_EXP_TYPE_ROOT_PORT)
368 edev->mode |= EEH_DEV_ROOT_PORT;
369 else if (pcie_flags == PCI_EXP_TYPE_DOWNSTREAM)
370 edev->mode |= EEH_DEV_DS_PORT;
371 }
372 }
373
374 edev->pe_config_addr = phb->ioda.pe_rmap[config_addr];
375
376 upstream_pe = pnv_eeh_get_upstream_pe(pdev);
377
378 /* Create PE */
379 ret = eeh_pe_tree_insert(edev, upstream_pe);
380 if (ret) {
381 eeh_edev_warn(edev, "Failed to add device to PE (code %d)\n", ret);
382 return NULL;
383 }
384
385 /*
386 * If the PE contains any one of following adapters, the
387 * PCI config space can't be accessed when dumping EEH log.
388 * Otherwise, we will run into fenced PHB caused by shortage
389 * of outbound credits in the adapter. The PCI config access
390 * should be blocked until PE reset. MMIO access is dropped
391 * by hardware certainly. In order to drop PCI config requests,
392 * one more flag (EEH_PE_CFG_RESTRICTED) is introduced, which
393 * will be checked in the backend for PE state retrival. If
394 * the PE becomes frozen for the first time and the flag has
395 * been set for the PE, we will set EEH_PE_CFG_BLOCKED for
396 * that PE to block its config space.
397 *
398 * Broadcom BCM5718 2-ports NICs (14e4:1656)
399 * Broadcom Austin 4-ports NICs (14e4:1657)
400 * Broadcom Shiner 4-ports 1G NICs (14e4:168a)
401 * Broadcom Shiner 2-ports 10G NICs (14e4:168e)
402 */
403 if ((pdn->vendor_id == PCI_VENDOR_ID_BROADCOM &&
404 pdn->device_id == 0x1656) ||
405 (pdn->vendor_id == PCI_VENDOR_ID_BROADCOM &&
406 pdn->device_id == 0x1657) ||
407 (pdn->vendor_id == PCI_VENDOR_ID_BROADCOM &&
408 pdn->device_id == 0x168a) ||
409 (pdn->vendor_id == PCI_VENDOR_ID_BROADCOM &&
410 pdn->device_id == 0x168e))
411 edev->pe->state |= EEH_PE_CFG_RESTRICTED;
412
413 /*
414 * Cache the PE primary bus, which can't be fetched when
415 * full hotplug is in progress. In that case, all child
416 * PCI devices of the PE are expected to be removed prior
417 * to PE reset.
418 */
419 if (!(edev->pe->state & EEH_PE_PRI_BUS)) {
420 edev->pe->bus = pci_find_bus(hose->global_number,
421 pdn->busno);
422 if (edev->pe->bus)
423 edev->pe->state |= EEH_PE_PRI_BUS;
424 }
425
426 /*
427 * Enable EEH explicitly so that we will do EEH check
428 * while accessing I/O stuff
429 */
430 if (!eeh_has_flag(EEH_ENABLED)) {
431 enable_irq(eeh_event_irq);
432 pnv_eeh_enable_phbs();
433 eeh_add_flag(EEH_ENABLED);
434 }
435
436 /* Save memory bars */
437 eeh_save_bars(edev);
438
439 eeh_edev_dbg(edev, "EEH enabled on device\n");
440
441 return edev;
442 }
443
444 /**
445 * pnv_eeh_set_option - Initialize EEH or MMIO/DMA reenable
446 * @pe: EEH PE
447 * @option: operation to be issued
448 *
449 * The function is used to control the EEH functionality globally.
450 * Currently, following options are support according to PAPR:
451 * Enable EEH, Disable EEH, Enable MMIO and Enable DMA
452 */
pnv_eeh_set_option(struct eeh_pe * pe,int option)453 static int pnv_eeh_set_option(struct eeh_pe *pe, int option)
454 {
455 struct pci_controller *hose = pe->phb;
456 struct pnv_phb *phb = hose->private_data;
457 bool freeze_pe = false;
458 int opt;
459 s64 rc;
460
461 switch (option) {
462 case EEH_OPT_DISABLE:
463 return -EPERM;
464 case EEH_OPT_ENABLE:
465 return 0;
466 case EEH_OPT_THAW_MMIO:
467 opt = OPAL_EEH_ACTION_CLEAR_FREEZE_MMIO;
468 break;
469 case EEH_OPT_THAW_DMA:
470 opt = OPAL_EEH_ACTION_CLEAR_FREEZE_DMA;
471 break;
472 case EEH_OPT_FREEZE_PE:
473 freeze_pe = true;
474 opt = OPAL_EEH_ACTION_SET_FREEZE_ALL;
475 break;
476 default:
477 pr_warn("%s: Invalid option %d\n", __func__, option);
478 return -EINVAL;
479 }
480
481 /* Freeze master and slave PEs if PHB supports compound PEs */
482 if (freeze_pe) {
483 if (phb->freeze_pe) {
484 phb->freeze_pe(phb, pe->addr);
485 return 0;
486 }
487
488 rc = opal_pci_eeh_freeze_set(phb->opal_id, pe->addr, opt);
489 if (rc != OPAL_SUCCESS) {
490 pr_warn("%s: Failure %lld freezing PHB#%x-PE#%x\n",
491 __func__, rc, phb->hose->global_number,
492 pe->addr);
493 return -EIO;
494 }
495
496 return 0;
497 }
498
499 /* Unfreeze master and slave PEs if PHB supports */
500 if (phb->unfreeze_pe)
501 return phb->unfreeze_pe(phb, pe->addr, opt);
502
503 rc = opal_pci_eeh_freeze_clear(phb->opal_id, pe->addr, opt);
504 if (rc != OPAL_SUCCESS) {
505 pr_warn("%s: Failure %lld enable %d for PHB#%x-PE#%x\n",
506 __func__, rc, option, phb->hose->global_number,
507 pe->addr);
508 return -EIO;
509 }
510
511 return 0;
512 }
513
pnv_eeh_get_phb_diag(struct eeh_pe * pe)514 static void pnv_eeh_get_phb_diag(struct eeh_pe *pe)
515 {
516 struct pnv_phb *phb = pe->phb->private_data;
517 s64 rc;
518
519 rc = opal_pci_get_phb_diag_data2(phb->opal_id, pe->data,
520 phb->diag_data_size);
521 if (rc != OPAL_SUCCESS)
522 pr_warn("%s: Failure %lld getting PHB#%x diag-data\n",
523 __func__, rc, pe->phb->global_number);
524 }
525
pnv_eeh_get_phb_state(struct eeh_pe * pe)526 static int pnv_eeh_get_phb_state(struct eeh_pe *pe)
527 {
528 struct pnv_phb *phb = pe->phb->private_data;
529 u8 fstate = 0;
530 __be16 pcierr = 0;
531 s64 rc;
532 int result = 0;
533
534 rc = opal_pci_eeh_freeze_status(phb->opal_id,
535 pe->addr,
536 &fstate,
537 &pcierr,
538 NULL);
539 if (rc != OPAL_SUCCESS) {
540 pr_warn("%s: Failure %lld getting PHB#%x state\n",
541 __func__, rc, phb->hose->global_number);
542 return EEH_STATE_NOT_SUPPORT;
543 }
544
545 /*
546 * Check PHB state. If the PHB is frozen for the
547 * first time, to dump the PHB diag-data.
548 */
549 if (be16_to_cpu(pcierr) != OPAL_EEH_PHB_ERROR) {
550 result = (EEH_STATE_MMIO_ACTIVE |
551 EEH_STATE_DMA_ACTIVE |
552 EEH_STATE_MMIO_ENABLED |
553 EEH_STATE_DMA_ENABLED);
554 } else if (!(pe->state & EEH_PE_ISOLATED)) {
555 eeh_pe_mark_isolated(pe);
556 pnv_eeh_get_phb_diag(pe);
557
558 if (eeh_has_flag(EEH_EARLY_DUMP_LOG))
559 pnv_pci_dump_phb_diag_data(pe->phb, pe->data);
560 }
561
562 return result;
563 }
564
pnv_eeh_get_pe_state(struct eeh_pe * pe)565 static int pnv_eeh_get_pe_state(struct eeh_pe *pe)
566 {
567 struct pnv_phb *phb = pe->phb->private_data;
568 u8 fstate = 0;
569 __be16 pcierr = 0;
570 s64 rc;
571 int result;
572
573 /*
574 * We don't clobber hardware frozen state until PE
575 * reset is completed. In order to keep EEH core
576 * moving forward, we have to return operational
577 * state during PE reset.
578 */
579 if (pe->state & EEH_PE_RESET) {
580 result = (EEH_STATE_MMIO_ACTIVE |
581 EEH_STATE_DMA_ACTIVE |
582 EEH_STATE_MMIO_ENABLED |
583 EEH_STATE_DMA_ENABLED);
584 return result;
585 }
586
587 /*
588 * Fetch PE state from hardware. If the PHB
589 * supports compound PE, let it handle that.
590 */
591 if (phb->get_pe_state) {
592 fstate = phb->get_pe_state(phb, pe->addr);
593 } else {
594 rc = opal_pci_eeh_freeze_status(phb->opal_id,
595 pe->addr,
596 &fstate,
597 &pcierr,
598 NULL);
599 if (rc != OPAL_SUCCESS) {
600 pr_warn("%s: Failure %lld getting PHB#%x-PE%x state\n",
601 __func__, rc, phb->hose->global_number,
602 pe->addr);
603 return EEH_STATE_NOT_SUPPORT;
604 }
605 }
606
607 /* Figure out state */
608 switch (fstate) {
609 case OPAL_EEH_STOPPED_NOT_FROZEN:
610 result = (EEH_STATE_MMIO_ACTIVE |
611 EEH_STATE_DMA_ACTIVE |
612 EEH_STATE_MMIO_ENABLED |
613 EEH_STATE_DMA_ENABLED);
614 break;
615 case OPAL_EEH_STOPPED_MMIO_FREEZE:
616 result = (EEH_STATE_DMA_ACTIVE |
617 EEH_STATE_DMA_ENABLED);
618 break;
619 case OPAL_EEH_STOPPED_DMA_FREEZE:
620 result = (EEH_STATE_MMIO_ACTIVE |
621 EEH_STATE_MMIO_ENABLED);
622 break;
623 case OPAL_EEH_STOPPED_MMIO_DMA_FREEZE:
624 result = 0;
625 break;
626 case OPAL_EEH_STOPPED_RESET:
627 result = EEH_STATE_RESET_ACTIVE;
628 break;
629 case OPAL_EEH_STOPPED_TEMP_UNAVAIL:
630 result = EEH_STATE_UNAVAILABLE;
631 break;
632 case OPAL_EEH_STOPPED_PERM_UNAVAIL:
633 result = EEH_STATE_NOT_SUPPORT;
634 break;
635 default:
636 result = EEH_STATE_NOT_SUPPORT;
637 pr_warn("%s: Invalid PHB#%x-PE#%x state %x\n",
638 __func__, phb->hose->global_number,
639 pe->addr, fstate);
640 }
641
642 /*
643 * If PHB supports compound PE, to freeze all
644 * slave PEs for consistency.
645 *
646 * If the PE is switching to frozen state for the
647 * first time, to dump the PHB diag-data.
648 */
649 if (!(result & EEH_STATE_NOT_SUPPORT) &&
650 !(result & EEH_STATE_UNAVAILABLE) &&
651 !(result & EEH_STATE_MMIO_ACTIVE) &&
652 !(result & EEH_STATE_DMA_ACTIVE) &&
653 !(pe->state & EEH_PE_ISOLATED)) {
654 if (phb->freeze_pe)
655 phb->freeze_pe(phb, pe->addr);
656
657 eeh_pe_mark_isolated(pe);
658 pnv_eeh_get_phb_diag(pe);
659
660 if (eeh_has_flag(EEH_EARLY_DUMP_LOG))
661 pnv_pci_dump_phb_diag_data(pe->phb, pe->data);
662 }
663
664 return result;
665 }
666
667 /**
668 * pnv_eeh_get_state - Retrieve PE state
669 * @pe: EEH PE
670 * @delay: delay while PE state is temporarily unavailable
671 *
672 * Retrieve the state of the specified PE. For IODA-compitable
673 * platform, it should be retrieved from IODA table. Therefore,
674 * we prefer passing down to hardware implementation to handle
675 * it.
676 */
pnv_eeh_get_state(struct eeh_pe * pe,int * delay)677 static int pnv_eeh_get_state(struct eeh_pe *pe, int *delay)
678 {
679 int ret;
680
681 if (pe->type & EEH_PE_PHB)
682 ret = pnv_eeh_get_phb_state(pe);
683 else
684 ret = pnv_eeh_get_pe_state(pe);
685
686 if (!delay)
687 return ret;
688
689 /*
690 * If the PE state is temporarily unavailable,
691 * to inform the EEH core delay for default
692 * period (1 second)
693 */
694 *delay = 0;
695 if (ret & EEH_STATE_UNAVAILABLE)
696 *delay = 1000;
697
698 return ret;
699 }
700
pnv_eeh_poll(unsigned long id)701 static s64 pnv_eeh_poll(unsigned long id)
702 {
703 s64 rc = OPAL_HARDWARE;
704
705 while (1) {
706 rc = opal_pci_poll(id);
707 if (rc <= 0)
708 break;
709
710 if (system_state < SYSTEM_RUNNING)
711 udelay(1000 * rc);
712 else
713 msleep(rc);
714 }
715
716 return rc;
717 }
718
pnv_eeh_phb_reset(struct pci_controller * hose,int option)719 int pnv_eeh_phb_reset(struct pci_controller *hose, int option)
720 {
721 struct pnv_phb *phb = hose->private_data;
722 s64 rc = OPAL_HARDWARE;
723
724 pr_debug("%s: Reset PHB#%x, option=%d\n",
725 __func__, hose->global_number, option);
726
727 /* Issue PHB complete reset request */
728 if (option == EEH_RESET_FUNDAMENTAL ||
729 option == EEH_RESET_HOT)
730 rc = opal_pci_reset(phb->opal_id,
731 OPAL_RESET_PHB_COMPLETE,
732 OPAL_ASSERT_RESET);
733 else if (option == EEH_RESET_DEACTIVATE)
734 rc = opal_pci_reset(phb->opal_id,
735 OPAL_RESET_PHB_COMPLETE,
736 OPAL_DEASSERT_RESET);
737 if (rc < 0)
738 goto out;
739
740 /*
741 * Poll state of the PHB until the request is done
742 * successfully. The PHB reset is usually PHB complete
743 * reset followed by hot reset on root bus. So we also
744 * need the PCI bus settlement delay.
745 */
746 if (rc > 0)
747 rc = pnv_eeh_poll(phb->opal_id);
748 if (option == EEH_RESET_DEACTIVATE) {
749 if (system_state < SYSTEM_RUNNING)
750 udelay(1000 * EEH_PE_RST_SETTLE_TIME);
751 else
752 msleep(EEH_PE_RST_SETTLE_TIME);
753 }
754 out:
755 if (rc != OPAL_SUCCESS)
756 return -EIO;
757
758 return 0;
759 }
760
pnv_eeh_root_reset(struct pci_controller * hose,int option)761 static int pnv_eeh_root_reset(struct pci_controller *hose, int option)
762 {
763 struct pnv_phb *phb = hose->private_data;
764 s64 rc = OPAL_HARDWARE;
765
766 pr_debug("%s: Reset PHB#%x, option=%d\n",
767 __func__, hose->global_number, option);
768
769 /*
770 * During the reset deassert time, we needn't care
771 * the reset scope because the firmware does nothing
772 * for fundamental or hot reset during deassert phase.
773 */
774 if (option == EEH_RESET_FUNDAMENTAL)
775 rc = opal_pci_reset(phb->opal_id,
776 OPAL_RESET_PCI_FUNDAMENTAL,
777 OPAL_ASSERT_RESET);
778 else if (option == EEH_RESET_HOT)
779 rc = opal_pci_reset(phb->opal_id,
780 OPAL_RESET_PCI_HOT,
781 OPAL_ASSERT_RESET);
782 else if (option == EEH_RESET_DEACTIVATE)
783 rc = opal_pci_reset(phb->opal_id,
784 OPAL_RESET_PCI_HOT,
785 OPAL_DEASSERT_RESET);
786 if (rc < 0)
787 goto out;
788
789 /* Poll state of the PHB until the request is done */
790 if (rc > 0)
791 rc = pnv_eeh_poll(phb->opal_id);
792 if (option == EEH_RESET_DEACTIVATE)
793 msleep(EEH_PE_RST_SETTLE_TIME);
794 out:
795 if (rc != OPAL_SUCCESS)
796 return -EIO;
797
798 return 0;
799 }
800
__pnv_eeh_bridge_reset(struct pci_dev * dev,int option)801 static int __pnv_eeh_bridge_reset(struct pci_dev *dev, int option)
802 {
803 struct pci_dn *pdn = pci_get_pdn_by_devfn(dev->bus, dev->devfn);
804 struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
805 int aer = edev ? edev->aer_cap : 0;
806 u32 ctrl;
807
808 pr_debug("%s: Secondary Reset PCI bus %04x:%02x with option %d\n",
809 __func__, pci_domain_nr(dev->bus),
810 dev->bus->number, option);
811
812 switch (option) {
813 case EEH_RESET_FUNDAMENTAL:
814 case EEH_RESET_HOT:
815 /* Don't report linkDown event */
816 if (aer) {
817 eeh_ops->read_config(edev, aer + PCI_ERR_UNCOR_MASK,
818 4, &ctrl);
819 ctrl |= PCI_ERR_UNC_SURPDN;
820 eeh_ops->write_config(edev, aer + PCI_ERR_UNCOR_MASK,
821 4, ctrl);
822 }
823
824 eeh_ops->read_config(edev, PCI_BRIDGE_CONTROL, 2, &ctrl);
825 ctrl |= PCI_BRIDGE_CTL_BUS_RESET;
826 eeh_ops->write_config(edev, PCI_BRIDGE_CONTROL, 2, ctrl);
827
828 msleep(EEH_PE_RST_HOLD_TIME);
829 break;
830 case EEH_RESET_DEACTIVATE:
831 eeh_ops->read_config(edev, PCI_BRIDGE_CONTROL, 2, &ctrl);
832 ctrl &= ~PCI_BRIDGE_CTL_BUS_RESET;
833 eeh_ops->write_config(edev, PCI_BRIDGE_CONTROL, 2, ctrl);
834
835 msleep(EEH_PE_RST_SETTLE_TIME);
836
837 /* Continue reporting linkDown event */
838 if (aer) {
839 eeh_ops->read_config(edev, aer + PCI_ERR_UNCOR_MASK,
840 4, &ctrl);
841 ctrl &= ~PCI_ERR_UNC_SURPDN;
842 eeh_ops->write_config(edev, aer + PCI_ERR_UNCOR_MASK,
843 4, ctrl);
844 }
845
846 break;
847 }
848
849 return 0;
850 }
851
pnv_eeh_bridge_reset(struct pci_dev * pdev,int option)852 static int pnv_eeh_bridge_reset(struct pci_dev *pdev, int option)
853 {
854 struct pci_controller *hose = pci_bus_to_host(pdev->bus);
855 struct pnv_phb *phb = hose->private_data;
856 struct device_node *dn = pci_device_to_OF_node(pdev);
857 uint64_t id = PCI_SLOT_ID(phb->opal_id,
858 (pdev->bus->number << 8) | pdev->devfn);
859 uint8_t scope;
860 int64_t rc;
861
862 /* Hot reset to the bus if firmware cannot handle */
863 if (!dn || !of_get_property(dn, "ibm,reset-by-firmware", NULL))
864 return __pnv_eeh_bridge_reset(pdev, option);
865
866 pr_debug("%s: FW reset PCI bus %04x:%02x with option %d\n",
867 __func__, pci_domain_nr(pdev->bus),
868 pdev->bus->number, option);
869
870 switch (option) {
871 case EEH_RESET_FUNDAMENTAL:
872 scope = OPAL_RESET_PCI_FUNDAMENTAL;
873 break;
874 case EEH_RESET_HOT:
875 scope = OPAL_RESET_PCI_HOT;
876 break;
877 case EEH_RESET_DEACTIVATE:
878 return 0;
879 default:
880 dev_dbg(&pdev->dev, "%s: Unsupported reset %d\n",
881 __func__, option);
882 return -EINVAL;
883 }
884
885 rc = opal_pci_reset(id, scope, OPAL_ASSERT_RESET);
886 if (rc <= OPAL_SUCCESS)
887 goto out;
888
889 rc = pnv_eeh_poll(id);
890 out:
891 return (rc == OPAL_SUCCESS) ? 0 : -EIO;
892 }
893
pnv_pci_reset_secondary_bus(struct pci_dev * dev)894 void pnv_pci_reset_secondary_bus(struct pci_dev *dev)
895 {
896 struct pci_controller *hose;
897
898 if (pci_is_root_bus(dev->bus)) {
899 hose = pci_bus_to_host(dev->bus);
900 pnv_eeh_root_reset(hose, EEH_RESET_HOT);
901 pnv_eeh_root_reset(hose, EEH_RESET_DEACTIVATE);
902 } else {
903 pnv_eeh_bridge_reset(dev, EEH_RESET_HOT);
904 pnv_eeh_bridge_reset(dev, EEH_RESET_DEACTIVATE);
905 }
906 }
907
pnv_eeh_wait_for_pending(struct pci_dn * pdn,const char * type,int pos,u16 mask)908 static void pnv_eeh_wait_for_pending(struct pci_dn *pdn, const char *type,
909 int pos, u16 mask)
910 {
911 struct eeh_dev *edev = pdn->edev;
912 int i, status = 0;
913
914 /* Wait for Transaction Pending bit to be cleared */
915 for (i = 0; i < 4; i++) {
916 eeh_ops->read_config(edev, pos, 2, &status);
917 if (!(status & mask))
918 return;
919
920 msleep((1 << i) * 100);
921 }
922
923 pr_warn("%s: Pending transaction while issuing %sFLR to %04x:%02x:%02x.%01x\n",
924 __func__, type,
925 pdn->phb->global_number, pdn->busno,
926 PCI_SLOT(pdn->devfn), PCI_FUNC(pdn->devfn));
927 }
928
pnv_eeh_do_flr(struct pci_dn * pdn,int option)929 static int pnv_eeh_do_flr(struct pci_dn *pdn, int option)
930 {
931 struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
932 u32 reg = 0;
933
934 if (WARN_ON(!edev->pcie_cap))
935 return -ENOTTY;
936
937 eeh_ops->read_config(edev, edev->pcie_cap + PCI_EXP_DEVCAP, 4, ®);
938 if (!(reg & PCI_EXP_DEVCAP_FLR))
939 return -ENOTTY;
940
941 switch (option) {
942 case EEH_RESET_HOT:
943 case EEH_RESET_FUNDAMENTAL:
944 pnv_eeh_wait_for_pending(pdn, "",
945 edev->pcie_cap + PCI_EXP_DEVSTA,
946 PCI_EXP_DEVSTA_TRPND);
947 eeh_ops->read_config(edev, edev->pcie_cap + PCI_EXP_DEVCTL,
948 4, ®);
949 reg |= PCI_EXP_DEVCTL_BCR_FLR;
950 eeh_ops->write_config(edev, edev->pcie_cap + PCI_EXP_DEVCTL,
951 4, reg);
952 msleep(EEH_PE_RST_HOLD_TIME);
953 break;
954 case EEH_RESET_DEACTIVATE:
955 eeh_ops->read_config(edev, edev->pcie_cap + PCI_EXP_DEVCTL,
956 4, ®);
957 reg &= ~PCI_EXP_DEVCTL_BCR_FLR;
958 eeh_ops->write_config(edev, edev->pcie_cap + PCI_EXP_DEVCTL,
959 4, reg);
960 msleep(EEH_PE_RST_SETTLE_TIME);
961 break;
962 }
963
964 return 0;
965 }
966
pnv_eeh_do_af_flr(struct pci_dn * pdn,int option)967 static int pnv_eeh_do_af_flr(struct pci_dn *pdn, int option)
968 {
969 struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
970 u32 cap = 0;
971
972 if (WARN_ON(!edev->af_cap))
973 return -ENOTTY;
974
975 eeh_ops->read_config(edev, edev->af_cap + PCI_AF_CAP, 1, &cap);
976 if (!(cap & PCI_AF_CAP_TP) || !(cap & PCI_AF_CAP_FLR))
977 return -ENOTTY;
978
979 switch (option) {
980 case EEH_RESET_HOT:
981 case EEH_RESET_FUNDAMENTAL:
982 /*
983 * Wait for Transaction Pending bit to clear. A word-aligned
984 * test is used, so we use the conrol offset rather than status
985 * and shift the test bit to match.
986 */
987 pnv_eeh_wait_for_pending(pdn, "AF",
988 edev->af_cap + PCI_AF_CTRL,
989 PCI_AF_STATUS_TP << 8);
990 eeh_ops->write_config(edev, edev->af_cap + PCI_AF_CTRL,
991 1, PCI_AF_CTRL_FLR);
992 msleep(EEH_PE_RST_HOLD_TIME);
993 break;
994 case EEH_RESET_DEACTIVATE:
995 eeh_ops->write_config(edev, edev->af_cap + PCI_AF_CTRL, 1, 0);
996 msleep(EEH_PE_RST_SETTLE_TIME);
997 break;
998 }
999
1000 return 0;
1001 }
1002
pnv_eeh_reset_vf_pe(struct eeh_pe * pe,int option)1003 static int pnv_eeh_reset_vf_pe(struct eeh_pe *pe, int option)
1004 {
1005 struct eeh_dev *edev;
1006 struct pci_dn *pdn;
1007 int ret;
1008
1009 /* The VF PE should have only one child device */
1010 edev = list_first_entry_or_null(&pe->edevs, struct eeh_dev, entry);
1011 pdn = eeh_dev_to_pdn(edev);
1012 if (!pdn)
1013 return -ENXIO;
1014
1015 ret = pnv_eeh_do_flr(pdn, option);
1016 if (!ret)
1017 return ret;
1018
1019 return pnv_eeh_do_af_flr(pdn, option);
1020 }
1021
1022 /**
1023 * pnv_eeh_reset - Reset the specified PE
1024 * @pe: EEH PE
1025 * @option: reset option
1026 *
1027 * Do reset on the indicated PE. For PCI bus sensitive PE,
1028 * we need to reset the parent p2p bridge. The PHB has to
1029 * be reinitialized if the p2p bridge is root bridge. For
1030 * PCI device sensitive PE, we will try to reset the device
1031 * through FLR. For now, we don't have OPAL APIs to do HARD
1032 * reset yet, so all reset would be SOFT (HOT) reset.
1033 */
pnv_eeh_reset(struct eeh_pe * pe,int option)1034 static int pnv_eeh_reset(struct eeh_pe *pe, int option)
1035 {
1036 struct pci_controller *hose = pe->phb;
1037 struct pnv_phb *phb;
1038 struct pci_bus *bus;
1039 int64_t rc;
1040
1041 /*
1042 * For PHB reset, we always have complete reset. For those PEs whose
1043 * primary bus derived from root complex (root bus) or root port
1044 * (usually bus#1), we apply hot or fundamental reset on the root port.
1045 * For other PEs, we always have hot reset on the PE primary bus.
1046 *
1047 * Here, we have different design to pHyp, which always clear the
1048 * frozen state during PE reset. However, the good idea here from
1049 * benh is to keep frozen state before we get PE reset done completely
1050 * (until BAR restore). With the frozen state, HW drops illegal IO
1051 * or MMIO access, which can incur recrusive frozen PE during PE
1052 * reset. The side effect is that EEH core has to clear the frozen
1053 * state explicitly after BAR restore.
1054 */
1055 if (pe->type & EEH_PE_PHB)
1056 return pnv_eeh_phb_reset(hose, option);
1057
1058 /*
1059 * The frozen PE might be caused by PAPR error injection
1060 * registers, which are expected to be cleared after hitting
1061 * frozen PE as stated in the hardware spec. Unfortunately,
1062 * that's not true on P7IOC. So we have to clear it manually
1063 * to avoid recursive EEH errors during recovery.
1064 */
1065 phb = hose->private_data;
1066 if (phb->model == PNV_PHB_MODEL_P7IOC &&
1067 (option == EEH_RESET_HOT ||
1068 option == EEH_RESET_FUNDAMENTAL)) {
1069 rc = opal_pci_reset(phb->opal_id,
1070 OPAL_RESET_PHB_ERROR,
1071 OPAL_ASSERT_RESET);
1072 if (rc != OPAL_SUCCESS) {
1073 pr_warn("%s: Failure %lld clearing error injection registers\n",
1074 __func__, rc);
1075 return -EIO;
1076 }
1077 }
1078
1079 if (pe->type & EEH_PE_VF)
1080 return pnv_eeh_reset_vf_pe(pe, option);
1081
1082 bus = eeh_pe_bus_get(pe);
1083 if (!bus) {
1084 pr_err("%s: Cannot find PCI bus for PHB#%x-PE#%x\n",
1085 __func__, pe->phb->global_number, pe->addr);
1086 return -EIO;
1087 }
1088
1089 if (pci_is_root_bus(bus))
1090 return pnv_eeh_root_reset(hose, option);
1091
1092 /*
1093 * For hot resets try use the generic PCI error recovery reset
1094 * functions. These correctly handles the case where the secondary
1095 * bus is behind a hotplug slot and it will use the slot provided
1096 * reset methods to prevent spurious hotplug events during the reset.
1097 *
1098 * Fundemental resets need to be handled internally to EEH since the
1099 * PCI core doesn't really have a concept of a fundemental reset,
1100 * mainly because there's no standard way to generate one. Only a
1101 * few devices require an FRESET so it should be fine.
1102 */
1103 if (option != EEH_RESET_FUNDAMENTAL) {
1104 /*
1105 * NB: Skiboot and pnv_eeh_bridge_reset() also no-op the
1106 * de-assert step. It's like the OPAL reset API was
1107 * poorly designed or something...
1108 */
1109 if (option == EEH_RESET_DEACTIVATE)
1110 return 0;
1111
1112 rc = pci_bus_error_reset(bus->self);
1113 if (!rc)
1114 return 0;
1115 }
1116
1117 /* otherwise, use the generic bridge reset. this might call into FW */
1118 if (pci_is_root_bus(bus->parent))
1119 return pnv_eeh_root_reset(hose, option);
1120 return pnv_eeh_bridge_reset(bus->self, option);
1121 }
1122
1123 /**
1124 * pnv_eeh_get_log - Retrieve error log
1125 * @pe: EEH PE
1126 * @severity: temporary or permanent error log
1127 * @drv_log: driver log to be combined with retrieved error log
1128 * @len: length of driver log
1129 *
1130 * Retrieve the temporary or permanent error from the PE.
1131 */
pnv_eeh_get_log(struct eeh_pe * pe,int severity,char * drv_log,unsigned long len)1132 static int pnv_eeh_get_log(struct eeh_pe *pe, int severity,
1133 char *drv_log, unsigned long len)
1134 {
1135 if (!eeh_has_flag(EEH_EARLY_DUMP_LOG))
1136 pnv_pci_dump_phb_diag_data(pe->phb, pe->data);
1137
1138 return 0;
1139 }
1140
1141 /**
1142 * pnv_eeh_configure_bridge - Configure PCI bridges in the indicated PE
1143 * @pe: EEH PE
1144 *
1145 * The function will be called to reconfigure the bridges included
1146 * in the specified PE so that the mulfunctional PE would be recovered
1147 * again.
1148 */
pnv_eeh_configure_bridge(struct eeh_pe * pe)1149 static int pnv_eeh_configure_bridge(struct eeh_pe *pe)
1150 {
1151 return 0;
1152 }
1153
1154 /**
1155 * pnv_pe_err_inject - Inject specified error to the indicated PE
1156 * @pe: the indicated PE
1157 * @type: error type
1158 * @func: specific error type
1159 * @addr: address
1160 * @mask: address mask
1161 *
1162 * The routine is called to inject specified error, which is
1163 * determined by @type and @func, to the indicated PE for
1164 * testing purpose.
1165 */
pnv_eeh_err_inject(struct eeh_pe * pe,int type,int func,unsigned long addr,unsigned long mask)1166 static int pnv_eeh_err_inject(struct eeh_pe *pe, int type, int func,
1167 unsigned long addr, unsigned long mask)
1168 {
1169 struct pci_controller *hose = pe->phb;
1170 struct pnv_phb *phb = hose->private_data;
1171 s64 rc;
1172
1173 if (type != OPAL_ERR_INJECT_TYPE_IOA_BUS_ERR &&
1174 type != OPAL_ERR_INJECT_TYPE_IOA_BUS_ERR64) {
1175 pr_warn("%s: Invalid error type %d\n",
1176 __func__, type);
1177 return -ERANGE;
1178 }
1179
1180 if (func < OPAL_ERR_INJECT_FUNC_IOA_LD_MEM_ADDR ||
1181 func > OPAL_ERR_INJECT_FUNC_IOA_DMA_WR_TARGET) {
1182 pr_warn("%s: Invalid error function %d\n",
1183 __func__, func);
1184 return -ERANGE;
1185 }
1186
1187 /* Firmware supports error injection ? */
1188 if (!opal_check_token(OPAL_PCI_ERR_INJECT)) {
1189 pr_warn("%s: Firmware doesn't support error injection\n",
1190 __func__);
1191 return -ENXIO;
1192 }
1193
1194 /* Do error injection */
1195 rc = opal_pci_err_inject(phb->opal_id, pe->addr,
1196 type, func, addr, mask);
1197 if (rc != OPAL_SUCCESS) {
1198 pr_warn("%s: Failure %lld injecting error "
1199 "%d-%d to PHB#%x-PE#%x\n",
1200 __func__, rc, type, func,
1201 hose->global_number, pe->addr);
1202 return -EIO;
1203 }
1204
1205 return 0;
1206 }
1207
pnv_eeh_cfg_blocked(struct pci_dn * pdn)1208 static inline bool pnv_eeh_cfg_blocked(struct pci_dn *pdn)
1209 {
1210 struct eeh_dev *edev = pdn_to_eeh_dev(pdn);
1211
1212 if (!edev || !edev->pe)
1213 return false;
1214
1215 /*
1216 * We will issue FLR or AF FLR to all VFs, which are contained
1217 * in VF PE. It relies on the EEH PCI config accessors. So we
1218 * can't block them during the window.
1219 */
1220 if (edev->physfn && (edev->pe->state & EEH_PE_RESET))
1221 return false;
1222
1223 if (edev->pe->state & EEH_PE_CFG_BLOCKED)
1224 return true;
1225
1226 return false;
1227 }
1228
pnv_eeh_read_config(struct eeh_dev * edev,int where,int size,u32 * val)1229 static int pnv_eeh_read_config(struct eeh_dev *edev,
1230 int where, int size, u32 *val)
1231 {
1232 struct pci_dn *pdn = eeh_dev_to_pdn(edev);
1233
1234 if (!pdn)
1235 return PCIBIOS_DEVICE_NOT_FOUND;
1236
1237 if (pnv_eeh_cfg_blocked(pdn)) {
1238 *val = 0xFFFFFFFF;
1239 return PCIBIOS_SET_FAILED;
1240 }
1241
1242 return pnv_pci_cfg_read(pdn, where, size, val);
1243 }
1244
pnv_eeh_write_config(struct eeh_dev * edev,int where,int size,u32 val)1245 static int pnv_eeh_write_config(struct eeh_dev *edev,
1246 int where, int size, u32 val)
1247 {
1248 struct pci_dn *pdn = eeh_dev_to_pdn(edev);
1249
1250 if (!pdn)
1251 return PCIBIOS_DEVICE_NOT_FOUND;
1252
1253 if (pnv_eeh_cfg_blocked(pdn))
1254 return PCIBIOS_SET_FAILED;
1255
1256 return pnv_pci_cfg_write(pdn, where, size, val);
1257 }
1258
pnv_eeh_dump_hub_diag_common(struct OpalIoP7IOCErrorData * data)1259 static void pnv_eeh_dump_hub_diag_common(struct OpalIoP7IOCErrorData *data)
1260 {
1261 /* GEM */
1262 if (data->gemXfir || data->gemRfir ||
1263 data->gemRirqfir || data->gemMask || data->gemRwof)
1264 pr_info(" GEM: %016llx %016llx %016llx %016llx %016llx\n",
1265 be64_to_cpu(data->gemXfir),
1266 be64_to_cpu(data->gemRfir),
1267 be64_to_cpu(data->gemRirqfir),
1268 be64_to_cpu(data->gemMask),
1269 be64_to_cpu(data->gemRwof));
1270
1271 /* LEM */
1272 if (data->lemFir || data->lemErrMask ||
1273 data->lemAction0 || data->lemAction1 || data->lemWof)
1274 pr_info(" LEM: %016llx %016llx %016llx %016llx %016llx\n",
1275 be64_to_cpu(data->lemFir),
1276 be64_to_cpu(data->lemErrMask),
1277 be64_to_cpu(data->lemAction0),
1278 be64_to_cpu(data->lemAction1),
1279 be64_to_cpu(data->lemWof));
1280 }
1281
pnv_eeh_get_and_dump_hub_diag(struct pci_controller * hose)1282 static void pnv_eeh_get_and_dump_hub_diag(struct pci_controller *hose)
1283 {
1284 struct pnv_phb *phb = hose->private_data;
1285 struct OpalIoP7IOCErrorData *data =
1286 (struct OpalIoP7IOCErrorData*)phb->diag_data;
1287 long rc;
1288
1289 rc = opal_pci_get_hub_diag_data(phb->hub_id, data, sizeof(*data));
1290 if (rc != OPAL_SUCCESS) {
1291 pr_warn("%s: Failed to get HUB#%llx diag-data (%ld)\n",
1292 __func__, phb->hub_id, rc);
1293 return;
1294 }
1295
1296 switch (be16_to_cpu(data->type)) {
1297 case OPAL_P7IOC_DIAG_TYPE_RGC:
1298 pr_info("P7IOC diag-data for RGC\n\n");
1299 pnv_eeh_dump_hub_diag_common(data);
1300 if (data->rgc.rgcStatus || data->rgc.rgcLdcp)
1301 pr_info(" RGC: %016llx %016llx\n",
1302 be64_to_cpu(data->rgc.rgcStatus),
1303 be64_to_cpu(data->rgc.rgcLdcp));
1304 break;
1305 case OPAL_P7IOC_DIAG_TYPE_BI:
1306 pr_info("P7IOC diag-data for BI %s\n\n",
1307 data->bi.biDownbound ? "Downbound" : "Upbound");
1308 pnv_eeh_dump_hub_diag_common(data);
1309 if (data->bi.biLdcp0 || data->bi.biLdcp1 ||
1310 data->bi.biLdcp2 || data->bi.biFenceStatus)
1311 pr_info(" BI: %016llx %016llx %016llx %016llx\n",
1312 be64_to_cpu(data->bi.biLdcp0),
1313 be64_to_cpu(data->bi.biLdcp1),
1314 be64_to_cpu(data->bi.biLdcp2),
1315 be64_to_cpu(data->bi.biFenceStatus));
1316 break;
1317 case OPAL_P7IOC_DIAG_TYPE_CI:
1318 pr_info("P7IOC diag-data for CI Port %d\n\n",
1319 data->ci.ciPort);
1320 pnv_eeh_dump_hub_diag_common(data);
1321 if (data->ci.ciPortStatus || data->ci.ciPortLdcp)
1322 pr_info(" CI: %016llx %016llx\n",
1323 be64_to_cpu(data->ci.ciPortStatus),
1324 be64_to_cpu(data->ci.ciPortLdcp));
1325 break;
1326 case OPAL_P7IOC_DIAG_TYPE_MISC:
1327 pr_info("P7IOC diag-data for MISC\n\n");
1328 pnv_eeh_dump_hub_diag_common(data);
1329 break;
1330 case OPAL_P7IOC_DIAG_TYPE_I2C:
1331 pr_info("P7IOC diag-data for I2C\n\n");
1332 pnv_eeh_dump_hub_diag_common(data);
1333 break;
1334 default:
1335 pr_warn("%s: Invalid type of HUB#%llx diag-data (%d)\n",
1336 __func__, phb->hub_id, data->type);
1337 }
1338 }
1339
pnv_eeh_get_pe(struct pci_controller * hose,u16 pe_no,struct eeh_pe ** pe)1340 static int pnv_eeh_get_pe(struct pci_controller *hose,
1341 u16 pe_no, struct eeh_pe **pe)
1342 {
1343 struct pnv_phb *phb = hose->private_data;
1344 struct pnv_ioda_pe *pnv_pe;
1345 struct eeh_pe *dev_pe;
1346
1347 /*
1348 * If PHB supports compound PE, to fetch
1349 * the master PE because slave PE is invisible
1350 * to EEH core.
1351 */
1352 pnv_pe = &phb->ioda.pe_array[pe_no];
1353 if (pnv_pe->flags & PNV_IODA_PE_SLAVE) {
1354 pnv_pe = pnv_pe->master;
1355 WARN_ON(!pnv_pe ||
1356 !(pnv_pe->flags & PNV_IODA_PE_MASTER));
1357 pe_no = pnv_pe->pe_number;
1358 }
1359
1360 /* Find the PE according to PE# */
1361 dev_pe = eeh_pe_get(hose, pe_no);
1362 if (!dev_pe)
1363 return -EEXIST;
1364
1365 /* Freeze the (compound) PE */
1366 *pe = dev_pe;
1367 if (!(dev_pe->state & EEH_PE_ISOLATED))
1368 phb->freeze_pe(phb, pe_no);
1369
1370 /*
1371 * At this point, we're sure the (compound) PE should
1372 * have been frozen. However, we still need poke until
1373 * hitting the frozen PE on top level.
1374 */
1375 dev_pe = dev_pe->parent;
1376 while (dev_pe && !(dev_pe->type & EEH_PE_PHB)) {
1377 int ret;
1378 ret = eeh_ops->get_state(dev_pe, NULL);
1379 if (ret <= 0 || eeh_state_active(ret)) {
1380 dev_pe = dev_pe->parent;
1381 continue;
1382 }
1383
1384 /* Frozen parent PE */
1385 *pe = dev_pe;
1386 if (!(dev_pe->state & EEH_PE_ISOLATED))
1387 phb->freeze_pe(phb, dev_pe->addr);
1388
1389 /* Next one */
1390 dev_pe = dev_pe->parent;
1391 }
1392
1393 return 0;
1394 }
1395
1396 /**
1397 * pnv_eeh_next_error - Retrieve next EEH error to handle
1398 * @pe: Affected PE
1399 *
1400 * The function is expected to be called by EEH core while it gets
1401 * special EEH event (without binding PE). The function calls to
1402 * OPAL APIs for next error to handle. The informational error is
1403 * handled internally by platform. However, the dead IOC, dead PHB,
1404 * fenced PHB and frozen PE should be handled by EEH core eventually.
1405 */
pnv_eeh_next_error(struct eeh_pe ** pe)1406 static int pnv_eeh_next_error(struct eeh_pe **pe)
1407 {
1408 struct pci_controller *hose;
1409 struct pnv_phb *phb;
1410 struct eeh_pe *phb_pe, *parent_pe;
1411 __be64 frozen_pe_no;
1412 __be16 err_type, severity;
1413 long rc;
1414 int state, ret = EEH_NEXT_ERR_NONE;
1415
1416 /*
1417 * While running here, it's safe to purge the event queue. The
1418 * event should still be masked.
1419 */
1420 eeh_remove_event(NULL, false);
1421
1422 list_for_each_entry(hose, &hose_list, list_node) {
1423 /*
1424 * If the subordinate PCI buses of the PHB has been
1425 * removed or is exactly under error recovery, we
1426 * needn't take care of it any more.
1427 */
1428 phb = hose->private_data;
1429 phb_pe = eeh_phb_pe_get(hose);
1430 if (!phb_pe || (phb_pe->state & EEH_PE_ISOLATED))
1431 continue;
1432
1433 rc = opal_pci_next_error(phb->opal_id,
1434 &frozen_pe_no, &err_type, &severity);
1435 if (rc != OPAL_SUCCESS) {
1436 pr_devel("%s: Invalid return value on "
1437 "PHB#%x (0x%lx) from opal_pci_next_error",
1438 __func__, hose->global_number, rc);
1439 continue;
1440 }
1441
1442 /* If the PHB doesn't have error, stop processing */
1443 if (be16_to_cpu(err_type) == OPAL_EEH_NO_ERROR ||
1444 be16_to_cpu(severity) == OPAL_EEH_SEV_NO_ERROR) {
1445 pr_devel("%s: No error found on PHB#%x\n",
1446 __func__, hose->global_number);
1447 continue;
1448 }
1449
1450 /*
1451 * Processing the error. We're expecting the error with
1452 * highest priority reported upon multiple errors on the
1453 * specific PHB.
1454 */
1455 pr_devel("%s: Error (%d, %d, %llu) on PHB#%x\n",
1456 __func__, be16_to_cpu(err_type),
1457 be16_to_cpu(severity), be64_to_cpu(frozen_pe_no),
1458 hose->global_number);
1459 switch (be16_to_cpu(err_type)) {
1460 case OPAL_EEH_IOC_ERROR:
1461 if (be16_to_cpu(severity) == OPAL_EEH_SEV_IOC_DEAD) {
1462 pr_err("EEH: dead IOC detected\n");
1463 ret = EEH_NEXT_ERR_DEAD_IOC;
1464 } else if (be16_to_cpu(severity) == OPAL_EEH_SEV_INF) {
1465 pr_info("EEH: IOC informative error "
1466 "detected\n");
1467 pnv_eeh_get_and_dump_hub_diag(hose);
1468 ret = EEH_NEXT_ERR_NONE;
1469 }
1470
1471 break;
1472 case OPAL_EEH_PHB_ERROR:
1473 if (be16_to_cpu(severity) == OPAL_EEH_SEV_PHB_DEAD) {
1474 *pe = phb_pe;
1475 pr_err("EEH: dead PHB#%x detected, "
1476 "location: %s\n",
1477 hose->global_number,
1478 eeh_pe_loc_get(phb_pe));
1479 ret = EEH_NEXT_ERR_DEAD_PHB;
1480 } else if (be16_to_cpu(severity) ==
1481 OPAL_EEH_SEV_PHB_FENCED) {
1482 *pe = phb_pe;
1483 pr_err("EEH: Fenced PHB#%x detected, "
1484 "location: %s\n",
1485 hose->global_number,
1486 eeh_pe_loc_get(phb_pe));
1487 ret = EEH_NEXT_ERR_FENCED_PHB;
1488 } else if (be16_to_cpu(severity) == OPAL_EEH_SEV_INF) {
1489 pr_info("EEH: PHB#%x informative error "
1490 "detected, location: %s\n",
1491 hose->global_number,
1492 eeh_pe_loc_get(phb_pe));
1493 pnv_eeh_get_phb_diag(phb_pe);
1494 pnv_pci_dump_phb_diag_data(hose, phb_pe->data);
1495 ret = EEH_NEXT_ERR_NONE;
1496 }
1497
1498 break;
1499 case OPAL_EEH_PE_ERROR:
1500 /*
1501 * If we can't find the corresponding PE, we
1502 * just try to unfreeze.
1503 */
1504 if (pnv_eeh_get_pe(hose,
1505 be64_to_cpu(frozen_pe_no), pe)) {
1506 pr_info("EEH: Clear non-existing PHB#%x-PE#%llx\n",
1507 hose->global_number, be64_to_cpu(frozen_pe_no));
1508 pr_info("EEH: PHB location: %s\n",
1509 eeh_pe_loc_get(phb_pe));
1510
1511 /* Dump PHB diag-data */
1512 rc = opal_pci_get_phb_diag_data2(phb->opal_id,
1513 phb->diag_data, phb->diag_data_size);
1514 if (rc == OPAL_SUCCESS)
1515 pnv_pci_dump_phb_diag_data(hose,
1516 phb->diag_data);
1517
1518 /* Try best to clear it */
1519 opal_pci_eeh_freeze_clear(phb->opal_id,
1520 be64_to_cpu(frozen_pe_no),
1521 OPAL_EEH_ACTION_CLEAR_FREEZE_ALL);
1522 ret = EEH_NEXT_ERR_NONE;
1523 } else if ((*pe)->state & EEH_PE_ISOLATED ||
1524 eeh_pe_passed(*pe)) {
1525 ret = EEH_NEXT_ERR_NONE;
1526 } else {
1527 pr_err("EEH: Frozen PE#%x "
1528 "on PHB#%x detected\n",
1529 (*pe)->addr,
1530 (*pe)->phb->global_number);
1531 pr_err("EEH: PE location: %s, "
1532 "PHB location: %s\n",
1533 eeh_pe_loc_get(*pe),
1534 eeh_pe_loc_get(phb_pe));
1535 ret = EEH_NEXT_ERR_FROZEN_PE;
1536 }
1537
1538 break;
1539 default:
1540 pr_warn("%s: Unexpected error type %d\n",
1541 __func__, be16_to_cpu(err_type));
1542 }
1543
1544 /*
1545 * EEH core will try recover from fenced PHB or
1546 * frozen PE. In the time for frozen PE, EEH core
1547 * enable IO path for that before collecting logs,
1548 * but it ruins the site. So we have to dump the
1549 * log in advance here.
1550 */
1551 if ((ret == EEH_NEXT_ERR_FROZEN_PE ||
1552 ret == EEH_NEXT_ERR_FENCED_PHB) &&
1553 !((*pe)->state & EEH_PE_ISOLATED)) {
1554 eeh_pe_mark_isolated(*pe);
1555 pnv_eeh_get_phb_diag(*pe);
1556
1557 if (eeh_has_flag(EEH_EARLY_DUMP_LOG))
1558 pnv_pci_dump_phb_diag_data((*pe)->phb,
1559 (*pe)->data);
1560 }
1561
1562 /*
1563 * We probably have the frozen parent PE out there and
1564 * we need have to handle frozen parent PE firstly.
1565 */
1566 if (ret == EEH_NEXT_ERR_FROZEN_PE) {
1567 parent_pe = (*pe)->parent;
1568 while (parent_pe) {
1569 /* Hit the ceiling ? */
1570 if (parent_pe->type & EEH_PE_PHB)
1571 break;
1572
1573 /* Frozen parent PE ? */
1574 state = eeh_ops->get_state(parent_pe, NULL);
1575 if (state > 0 && !eeh_state_active(state))
1576 *pe = parent_pe;
1577
1578 /* Next parent level */
1579 parent_pe = parent_pe->parent;
1580 }
1581
1582 /* We possibly migrate to another PE */
1583 eeh_pe_mark_isolated(*pe);
1584 }
1585
1586 /*
1587 * If we have no errors on the specific PHB or only
1588 * informative error there, we continue poking it.
1589 * Otherwise, we need actions to be taken by upper
1590 * layer.
1591 */
1592 if (ret > EEH_NEXT_ERR_INF)
1593 break;
1594 }
1595
1596 /* Unmask the event */
1597 if (ret == EEH_NEXT_ERR_NONE && eeh_enabled())
1598 enable_irq(eeh_event_irq);
1599
1600 return ret;
1601 }
1602
pnv_eeh_restore_config(struct eeh_dev * edev)1603 static int pnv_eeh_restore_config(struct eeh_dev *edev)
1604 {
1605 struct pnv_phb *phb;
1606 s64 ret = 0;
1607
1608 if (!edev)
1609 return -EEXIST;
1610
1611 if (edev->physfn)
1612 return 0;
1613
1614 phb = edev->controller->private_data;
1615 ret = opal_pci_reinit(phb->opal_id,
1616 OPAL_REINIT_PCI_DEV, edev->bdfn);
1617
1618 if (ret) {
1619 pr_warn("%s: Can't reinit PCI dev 0x%x (%lld)\n",
1620 __func__, edev->bdfn, ret);
1621 return -EIO;
1622 }
1623
1624 return ret;
1625 }
1626
1627 static struct eeh_ops pnv_eeh_ops = {
1628 .name = "powernv",
1629 .probe = pnv_eeh_probe,
1630 .set_option = pnv_eeh_set_option,
1631 .get_state = pnv_eeh_get_state,
1632 .reset = pnv_eeh_reset,
1633 .get_log = pnv_eeh_get_log,
1634 .configure_bridge = pnv_eeh_configure_bridge,
1635 .err_inject = pnv_eeh_err_inject,
1636 .read_config = pnv_eeh_read_config,
1637 .write_config = pnv_eeh_write_config,
1638 .next_error = pnv_eeh_next_error,
1639 .restore_config = pnv_eeh_restore_config,
1640 .notify_resume = NULL
1641 };
1642
1643 #ifdef CONFIG_PCI_IOV
pnv_pci_fixup_vf_mps(struct pci_dev * pdev)1644 static void pnv_pci_fixup_vf_mps(struct pci_dev *pdev)
1645 {
1646 struct pci_dn *pdn = pci_get_pdn(pdev);
1647 int parent_mps;
1648
1649 if (!pdev->is_virtfn)
1650 return;
1651
1652 /* Synchronize MPS for VF and PF */
1653 parent_mps = pcie_get_mps(pdev->physfn);
1654 if ((128 << pdev->pcie_mpss) >= parent_mps)
1655 pcie_set_mps(pdev, parent_mps);
1656 pdn->mps = pcie_get_mps(pdev);
1657 }
1658 DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pnv_pci_fixup_vf_mps);
1659 #endif /* CONFIG_PCI_IOV */
1660
1661 /**
1662 * eeh_powernv_init - Register platform dependent EEH operations
1663 *
1664 * EEH initialization on powernv platform. This function should be
1665 * called before any EEH related functions.
1666 */
eeh_powernv_init(void)1667 static int __init eeh_powernv_init(void)
1668 {
1669 int max_diag_size = PNV_PCI_DIAG_BUF_SIZE;
1670 struct pci_controller *hose;
1671 struct pnv_phb *phb;
1672 int ret = -EINVAL;
1673
1674 if (!firmware_has_feature(FW_FEATURE_OPAL)) {
1675 pr_warn("%s: OPAL is required !\n", __func__);
1676 return -EINVAL;
1677 }
1678
1679 /* Set probe mode */
1680 eeh_add_flag(EEH_PROBE_MODE_DEV);
1681
1682 /*
1683 * P7IOC blocks PCI config access to frozen PE, but PHB3
1684 * doesn't do that. So we have to selectively enable I/O
1685 * prior to collecting error log.
1686 */
1687 list_for_each_entry(hose, &hose_list, list_node) {
1688 phb = hose->private_data;
1689
1690 if (phb->model == PNV_PHB_MODEL_P7IOC)
1691 eeh_add_flag(EEH_ENABLE_IO_FOR_LOG);
1692
1693 if (phb->diag_data_size > max_diag_size)
1694 max_diag_size = phb->diag_data_size;
1695
1696 break;
1697 }
1698
1699 /*
1700 * eeh_init() allocates the eeh_pe and its aux data buf so the
1701 * size needs to be set before calling eeh_init().
1702 */
1703 eeh_set_pe_aux_size(max_diag_size);
1704 ppc_md.pcibios_bus_add_device = pnv_pcibios_bus_add_device;
1705
1706 ret = eeh_init(&pnv_eeh_ops);
1707 if (!ret)
1708 pr_info("EEH: PowerNV platform initialized\n");
1709 else
1710 pr_info("EEH: Failed to initialize PowerNV platform (%d)\n", ret);
1711
1712 return ret;
1713 }
1714 machine_arch_initcall(powernv, eeh_powernv_init);
1715
