1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * linux/arch/arm/plat-omap/dma.c
4 *
5 * Copyright (C) 2003 - 2008 Nokia Corporation
6 * Author: Juha Yrjölä <juha.yrjola@nokia.com>
7 * DMA channel linking for 1610 by Samuel Ortiz <samuel.ortiz@nokia.com>
8 * Graphics DMA and LCD DMA graphics tranformations
9 * by Imre Deak <imre.deak@nokia.com>
10 * OMAP2/3 support Copyright (C) 2004-2007 Texas Instruments, Inc.
11 * Merged to support both OMAP1 and OMAP2 by Tony Lindgren <tony@atomide.com>
12 * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc.
13 *
14 * Copyright (C) 2009 Texas Instruments
15 * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
16 *
17 * Support functions for the OMAP internal DMA channels.
18 *
19 * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
20 * Converted DMA library into DMA platform driver.
21 * - G, Manjunath Kondaiah <manjugk@ti.com>
22 */
23
24 #include <linux/module.h>
25 #include <linux/init.h>
26 #include <linux/sched.h>
27 #include <linux/spinlock.h>
28 #include <linux/errno.h>
29 #include <linux/interrupt.h>
30 #include <linux/irq.h>
31 #include <linux/io.h>
32 #include <linux/slab.h>
33 #include <linux/delay.h>
34
35 #include <linux/omap-dma.h>
36
37 #ifdef CONFIG_ARCH_OMAP1
38 #include <mach/soc.h>
39 #endif
40
41 /*
42 * MAX_LOGICAL_DMA_CH_COUNT: the maximum number of logical DMA
43 * channels that an instance of the SDMA IP block can support. Used
44 * to size arrays. (The actual maximum on a particular SoC may be less
45 * than this -- for example, OMAP1 SDMA instances only support 17 logical
46 * DMA channels.)
47 */
48 #define MAX_LOGICAL_DMA_CH_COUNT 32
49
50 #undef DEBUG
51
52 #ifndef CONFIG_ARCH_OMAP1
53 enum { DMA_CH_ALLOC_DONE, DMA_CH_PARAMS_SET_DONE, DMA_CH_STARTED,
54 DMA_CH_QUEUED, DMA_CH_NOTSTARTED, DMA_CH_PAUSED, DMA_CH_LINK_ENABLED
55 };
56
57 enum { DMA_CHAIN_STARTED, DMA_CHAIN_NOTSTARTED };
58 #endif
59
60 #define OMAP_DMA_ACTIVE 0x01
61 #define OMAP2_DMA_CSR_CLEAR_MASK 0xffffffff
62
63 #define OMAP_FUNC_MUX_ARM_BASE (0xfffe1000 + 0xec)
64
65 static struct omap_system_dma_plat_info *p;
66 static struct omap_dma_dev_attr *d;
67 static void omap_clear_dma(int lch);
68 static int omap_dma_set_prio_lch(int lch, unsigned char read_prio,
69 unsigned char write_prio);
70 static int enable_1510_mode;
71 static u32 errata;
72
73 static struct omap_dma_global_context_registers {
74 u32 dma_irqenable_l0;
75 u32 dma_irqenable_l1;
76 u32 dma_ocp_sysconfig;
77 u32 dma_gcr;
78 } omap_dma_global_context;
79
80 struct dma_link_info {
81 int *linked_dmach_q;
82 int no_of_lchs_linked;
83
84 int q_count;
85 int q_tail;
86 int q_head;
87
88 int chain_state;
89 int chain_mode;
90
91 };
92
93 static struct dma_link_info *dma_linked_lch;
94
95 #ifndef CONFIG_ARCH_OMAP1
96
97 /* Chain handling macros */
98 #define OMAP_DMA_CHAIN_QINIT(chain_id) \
99 do { \
100 dma_linked_lch[chain_id].q_head = \
101 dma_linked_lch[chain_id].q_tail = \
102 dma_linked_lch[chain_id].q_count = 0; \
103 } while (0)
104 #define OMAP_DMA_CHAIN_QFULL(chain_id) \
105 (dma_linked_lch[chain_id].no_of_lchs_linked == \
106 dma_linked_lch[chain_id].q_count)
107 #define OMAP_DMA_CHAIN_QLAST(chain_id) \
108 do { \
109 ((dma_linked_lch[chain_id].no_of_lchs_linked-1) == \
110 dma_linked_lch[chain_id].q_count) \
111 } while (0)
112 #define OMAP_DMA_CHAIN_QEMPTY(chain_id) \
113 (0 == dma_linked_lch[chain_id].q_count)
114 #define __OMAP_DMA_CHAIN_INCQ(end) \
115 ((end) = ((end)+1) % dma_linked_lch[chain_id].no_of_lchs_linked)
116 #define OMAP_DMA_CHAIN_INCQHEAD(chain_id) \
117 do { \
118 __OMAP_DMA_CHAIN_INCQ(dma_linked_lch[chain_id].q_head); \
119 dma_linked_lch[chain_id].q_count--; \
120 } while (0)
121
122 #define OMAP_DMA_CHAIN_INCQTAIL(chain_id) \
123 do { \
124 __OMAP_DMA_CHAIN_INCQ(dma_linked_lch[chain_id].q_tail); \
125 dma_linked_lch[chain_id].q_count++; \
126 } while (0)
127 #endif
128
129 static int dma_lch_count;
130 static int dma_chan_count;
131 static int omap_dma_reserve_channels;
132
133 static spinlock_t dma_chan_lock;
134 static struct omap_dma_lch *dma_chan;
135
136 static inline void disable_lnk(int lch);
137 static void omap_disable_channel_irq(int lch);
138 static inline void omap_enable_channel_irq(int lch);
139
140 #define REVISIT_24XX() printk(KERN_ERR "FIXME: no %s on 24xx\n", \
141 __func__);
142
143 #ifdef CONFIG_ARCH_OMAP15XX
144 /* Returns 1 if the DMA module is in OMAP1510-compatible mode, 0 otherwise */
omap_dma_in_1510_mode(void)145 static int omap_dma_in_1510_mode(void)
146 {
147 return enable_1510_mode;
148 }
149 #else
150 #define omap_dma_in_1510_mode() 0
151 #endif
152
153 #ifdef CONFIG_ARCH_OMAP1
set_gdma_dev(int req,int dev)154 static inline void set_gdma_dev(int req, int dev)
155 {
156 u32 reg = OMAP_FUNC_MUX_ARM_BASE + ((req - 1) / 5) * 4;
157 int shift = ((req - 1) % 5) * 6;
158 u32 l;
159
160 l = omap_readl(reg);
161 l &= ~(0x3f << shift);
162 l |= (dev - 1) << shift;
163 omap_writel(l, reg);
164 }
165 #else
166 #define set_gdma_dev(req, dev) do {} while (0)
167 #define omap_readl(reg) 0
168 #define omap_writel(val, reg) do {} while (0)
169 #endif
170
171 #ifdef CONFIG_ARCH_OMAP1
omap_set_dma_priority(int lch,int dst_port,int priority)172 void omap_set_dma_priority(int lch, int dst_port, int priority)
173 {
174 unsigned long reg;
175 u32 l;
176
177 if (dma_omap1()) {
178 switch (dst_port) {
179 case OMAP_DMA_PORT_OCP_T1: /* FFFECC00 */
180 reg = OMAP_TC_OCPT1_PRIOR;
181 break;
182 case OMAP_DMA_PORT_OCP_T2: /* FFFECCD0 */
183 reg = OMAP_TC_OCPT2_PRIOR;
184 break;
185 case OMAP_DMA_PORT_EMIFF: /* FFFECC08 */
186 reg = OMAP_TC_EMIFF_PRIOR;
187 break;
188 case OMAP_DMA_PORT_EMIFS: /* FFFECC04 */
189 reg = OMAP_TC_EMIFS_PRIOR;
190 break;
191 default:
192 BUG();
193 return;
194 }
195 l = omap_readl(reg);
196 l &= ~(0xf << 8);
197 l |= (priority & 0xf) << 8;
198 omap_writel(l, reg);
199 }
200 }
201 #endif
202
203 #ifdef CONFIG_ARCH_OMAP2PLUS
omap_set_dma_priority(int lch,int dst_port,int priority)204 void omap_set_dma_priority(int lch, int dst_port, int priority)
205 {
206 u32 ccr;
207
208 ccr = p->dma_read(CCR, lch);
209 if (priority)
210 ccr |= (1 << 6);
211 else
212 ccr &= ~(1 << 6);
213 p->dma_write(ccr, CCR, lch);
214 }
215 #endif
216 EXPORT_SYMBOL(omap_set_dma_priority);
217
omap_set_dma_transfer_params(int lch,int data_type,int elem_count,int frame_count,int sync_mode,int dma_trigger,int src_or_dst_synch)218 void omap_set_dma_transfer_params(int lch, int data_type, int elem_count,
219 int frame_count, int sync_mode,
220 int dma_trigger, int src_or_dst_synch)
221 {
222 u32 l;
223
224 l = p->dma_read(CSDP, lch);
225 l &= ~0x03;
226 l |= data_type;
227 p->dma_write(l, CSDP, lch);
228
229 if (dma_omap1()) {
230 u16 ccr;
231
232 ccr = p->dma_read(CCR, lch);
233 ccr &= ~(1 << 5);
234 if (sync_mode == OMAP_DMA_SYNC_FRAME)
235 ccr |= 1 << 5;
236 p->dma_write(ccr, CCR, lch);
237
238 ccr = p->dma_read(CCR2, lch);
239 ccr &= ~(1 << 2);
240 if (sync_mode == OMAP_DMA_SYNC_BLOCK)
241 ccr |= 1 << 2;
242 p->dma_write(ccr, CCR2, lch);
243 }
244
245 if (dma_omap2plus() && dma_trigger) {
246 u32 val;
247
248 val = p->dma_read(CCR, lch);
249
250 /* DMA_SYNCHRO_CONTROL_UPPER depends on the channel number */
251 val &= ~((1 << 23) | (3 << 19) | 0x1f);
252 val |= (dma_trigger & ~0x1f) << 14;
253 val |= dma_trigger & 0x1f;
254
255 if (sync_mode & OMAP_DMA_SYNC_FRAME)
256 val |= 1 << 5;
257 else
258 val &= ~(1 << 5);
259
260 if (sync_mode & OMAP_DMA_SYNC_BLOCK)
261 val |= 1 << 18;
262 else
263 val &= ~(1 << 18);
264
265 if (src_or_dst_synch == OMAP_DMA_DST_SYNC_PREFETCH) {
266 val &= ~(1 << 24); /* dest synch */
267 val |= (1 << 23); /* Prefetch */
268 } else if (src_or_dst_synch) {
269 val |= 1 << 24; /* source synch */
270 } else {
271 val &= ~(1 << 24); /* dest synch */
272 }
273 p->dma_write(val, CCR, lch);
274 }
275
276 p->dma_write(elem_count, CEN, lch);
277 p->dma_write(frame_count, CFN, lch);
278 }
279 EXPORT_SYMBOL(omap_set_dma_transfer_params);
280
omap_set_dma_write_mode(int lch,enum omap_dma_write_mode mode)281 void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode)
282 {
283 if (dma_omap2plus()) {
284 u32 csdp;
285
286 csdp = p->dma_read(CSDP, lch);
287 csdp &= ~(0x3 << 16);
288 csdp |= (mode << 16);
289 p->dma_write(csdp, CSDP, lch);
290 }
291 }
292 EXPORT_SYMBOL(omap_set_dma_write_mode);
293
omap_set_dma_channel_mode(int lch,enum omap_dma_channel_mode mode)294 void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode)
295 {
296 if (dma_omap1() && !dma_omap15xx()) {
297 u32 l;
298
299 l = p->dma_read(LCH_CTRL, lch);
300 l &= ~0x7;
301 l |= mode;
302 p->dma_write(l, LCH_CTRL, lch);
303 }
304 }
305 EXPORT_SYMBOL(omap_set_dma_channel_mode);
306
307 /* Note that src_port is only for omap1 */
omap_set_dma_src_params(int lch,int src_port,int src_amode,unsigned long src_start,int src_ei,int src_fi)308 void omap_set_dma_src_params(int lch, int src_port, int src_amode,
309 unsigned long src_start,
310 int src_ei, int src_fi)
311 {
312 u32 l;
313
314 if (dma_omap1()) {
315 u16 w;
316
317 w = p->dma_read(CSDP, lch);
318 w &= ~(0x1f << 2);
319 w |= src_port << 2;
320 p->dma_write(w, CSDP, lch);
321 }
322
323 l = p->dma_read(CCR, lch);
324 l &= ~(0x03 << 12);
325 l |= src_amode << 12;
326 p->dma_write(l, CCR, lch);
327
328 p->dma_write(src_start, CSSA, lch);
329
330 p->dma_write(src_ei, CSEI, lch);
331 p->dma_write(src_fi, CSFI, lch);
332 }
333 EXPORT_SYMBOL(omap_set_dma_src_params);
334
omap_set_dma_params(int lch,struct omap_dma_channel_params * params)335 void omap_set_dma_params(int lch, struct omap_dma_channel_params *params)
336 {
337 omap_set_dma_transfer_params(lch, params->data_type,
338 params->elem_count, params->frame_count,
339 params->sync_mode, params->trigger,
340 params->src_or_dst_synch);
341 omap_set_dma_src_params(lch, params->src_port,
342 params->src_amode, params->src_start,
343 params->src_ei, params->src_fi);
344
345 omap_set_dma_dest_params(lch, params->dst_port,
346 params->dst_amode, params->dst_start,
347 params->dst_ei, params->dst_fi);
348 if (params->read_prio || params->write_prio)
349 omap_dma_set_prio_lch(lch, params->read_prio,
350 params->write_prio);
351 }
352 EXPORT_SYMBOL(omap_set_dma_params);
353
omap_set_dma_src_data_pack(int lch,int enable)354 void omap_set_dma_src_data_pack(int lch, int enable)
355 {
356 u32 l;
357
358 l = p->dma_read(CSDP, lch);
359 l &= ~(1 << 6);
360 if (enable)
361 l |= (1 << 6);
362 p->dma_write(l, CSDP, lch);
363 }
364 EXPORT_SYMBOL(omap_set_dma_src_data_pack);
365
omap_set_dma_src_burst_mode(int lch,enum omap_dma_burst_mode burst_mode)366 void omap_set_dma_src_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
367 {
368 unsigned int burst = 0;
369 u32 l;
370
371 l = p->dma_read(CSDP, lch);
372 l &= ~(0x03 << 7);
373
374 switch (burst_mode) {
375 case OMAP_DMA_DATA_BURST_DIS:
376 break;
377 case OMAP_DMA_DATA_BURST_4:
378 if (dma_omap2plus())
379 burst = 0x1;
380 else
381 burst = 0x2;
382 break;
383 case OMAP_DMA_DATA_BURST_8:
384 if (dma_omap2plus()) {
385 burst = 0x2;
386 break;
387 }
388 /*
389 * not supported by current hardware on OMAP1
390 * w |= (0x03 << 7);
391 */
392 /* fall through */
393 case OMAP_DMA_DATA_BURST_16:
394 if (dma_omap2plus()) {
395 burst = 0x3;
396 break;
397 }
398 /* OMAP1 don't support burst 16 */
399 /* fall through */
400 default:
401 BUG();
402 }
403
404 l |= (burst << 7);
405 p->dma_write(l, CSDP, lch);
406 }
407 EXPORT_SYMBOL(omap_set_dma_src_burst_mode);
408
409 /* Note that dest_port is only for OMAP1 */
omap_set_dma_dest_params(int lch,int dest_port,int dest_amode,unsigned long dest_start,int dst_ei,int dst_fi)410 void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode,
411 unsigned long dest_start,
412 int dst_ei, int dst_fi)
413 {
414 u32 l;
415
416 if (dma_omap1()) {
417 l = p->dma_read(CSDP, lch);
418 l &= ~(0x1f << 9);
419 l |= dest_port << 9;
420 p->dma_write(l, CSDP, lch);
421 }
422
423 l = p->dma_read(CCR, lch);
424 l &= ~(0x03 << 14);
425 l |= dest_amode << 14;
426 p->dma_write(l, CCR, lch);
427
428 p->dma_write(dest_start, CDSA, lch);
429
430 p->dma_write(dst_ei, CDEI, lch);
431 p->dma_write(dst_fi, CDFI, lch);
432 }
433 EXPORT_SYMBOL(omap_set_dma_dest_params);
434
omap_set_dma_dest_data_pack(int lch,int enable)435 void omap_set_dma_dest_data_pack(int lch, int enable)
436 {
437 u32 l;
438
439 l = p->dma_read(CSDP, lch);
440 l &= ~(1 << 13);
441 if (enable)
442 l |= 1 << 13;
443 p->dma_write(l, CSDP, lch);
444 }
445 EXPORT_SYMBOL(omap_set_dma_dest_data_pack);
446
omap_set_dma_dest_burst_mode(int lch,enum omap_dma_burst_mode burst_mode)447 void omap_set_dma_dest_burst_mode(int lch, enum omap_dma_burst_mode burst_mode)
448 {
449 unsigned int burst = 0;
450 u32 l;
451
452 l = p->dma_read(CSDP, lch);
453 l &= ~(0x03 << 14);
454
455 switch (burst_mode) {
456 case OMAP_DMA_DATA_BURST_DIS:
457 break;
458 case OMAP_DMA_DATA_BURST_4:
459 if (dma_omap2plus())
460 burst = 0x1;
461 else
462 burst = 0x2;
463 break;
464 case OMAP_DMA_DATA_BURST_8:
465 if (dma_omap2plus())
466 burst = 0x2;
467 else
468 burst = 0x3;
469 break;
470 case OMAP_DMA_DATA_BURST_16:
471 if (dma_omap2plus()) {
472 burst = 0x3;
473 break;
474 }
475 /* OMAP1 don't support burst 16 */
476 /* fall through */
477 default:
478 printk(KERN_ERR "Invalid DMA burst mode\n");
479 BUG();
480 return;
481 }
482 l |= (burst << 14);
483 p->dma_write(l, CSDP, lch);
484 }
485 EXPORT_SYMBOL(omap_set_dma_dest_burst_mode);
486
omap_enable_channel_irq(int lch)487 static inline void omap_enable_channel_irq(int lch)
488 {
489 /* Clear CSR */
490 if (dma_omap1())
491 p->dma_read(CSR, lch);
492 else
493 p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch);
494
495 /* Enable some nice interrupts. */
496 p->dma_write(dma_chan[lch].enabled_irqs, CICR, lch);
497 }
498
omap_disable_channel_irq(int lch)499 static inline void omap_disable_channel_irq(int lch)
500 {
501 /* disable channel interrupts */
502 p->dma_write(0, CICR, lch);
503 /* Clear CSR */
504 if (dma_omap1())
505 p->dma_read(CSR, lch);
506 else
507 p->dma_write(OMAP2_DMA_CSR_CLEAR_MASK, CSR, lch);
508 }
509
omap_enable_dma_irq(int lch,u16 bits)510 void omap_enable_dma_irq(int lch, u16 bits)
511 {
512 dma_chan[lch].enabled_irqs |= bits;
513 }
514 EXPORT_SYMBOL(omap_enable_dma_irq);
515
omap_disable_dma_irq(int lch,u16 bits)516 void omap_disable_dma_irq(int lch, u16 bits)
517 {
518 dma_chan[lch].enabled_irqs &= ~bits;
519 }
520 EXPORT_SYMBOL(omap_disable_dma_irq);
521
enable_lnk(int lch)522 static inline void enable_lnk(int lch)
523 {
524 u32 l;
525
526 l = p->dma_read(CLNK_CTRL, lch);
527
528 if (dma_omap1())
529 l &= ~(1 << 14);
530
531 /* Set the ENABLE_LNK bits */
532 if (dma_chan[lch].next_lch != -1)
533 l = dma_chan[lch].next_lch | (1 << 15);
534
535 #ifndef CONFIG_ARCH_OMAP1
536 if (dma_omap2plus())
537 if (dma_chan[lch].next_linked_ch != -1)
538 l = dma_chan[lch].next_linked_ch | (1 << 15);
539 #endif
540
541 p->dma_write(l, CLNK_CTRL, lch);
542 }
543
disable_lnk(int lch)544 static inline void disable_lnk(int lch)
545 {
546 u32 l;
547
548 l = p->dma_read(CLNK_CTRL, lch);
549
550 /* Disable interrupts */
551 omap_disable_channel_irq(lch);
552
553 if (dma_omap1()) {
554 /* Set the STOP_LNK bit */
555 l |= 1 << 14;
556 }
557
558 if (dma_omap2plus()) {
559 /* Clear the ENABLE_LNK bit */
560 l &= ~(1 << 15);
561 }
562
563 p->dma_write(l, CLNK_CTRL, lch);
564 dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
565 }
566
omap2_enable_irq_lch(int lch)567 static inline void omap2_enable_irq_lch(int lch)
568 {
569 u32 val;
570 unsigned long flags;
571
572 if (dma_omap1())
573 return;
574
575 spin_lock_irqsave(&dma_chan_lock, flags);
576 /* clear IRQ STATUS */
577 p->dma_write(1 << lch, IRQSTATUS_L0, lch);
578 /* Enable interrupt */
579 val = p->dma_read(IRQENABLE_L0, lch);
580 val |= 1 << lch;
581 p->dma_write(val, IRQENABLE_L0, lch);
582 spin_unlock_irqrestore(&dma_chan_lock, flags);
583 }
584
omap2_disable_irq_lch(int lch)585 static inline void omap2_disable_irq_lch(int lch)
586 {
587 u32 val;
588 unsigned long flags;
589
590 if (dma_omap1())
591 return;
592
593 spin_lock_irqsave(&dma_chan_lock, flags);
594 /* Disable interrupt */
595 val = p->dma_read(IRQENABLE_L0, lch);
596 val &= ~(1 << lch);
597 p->dma_write(val, IRQENABLE_L0, lch);
598 /* clear IRQ STATUS */
599 p->dma_write(1 << lch, IRQSTATUS_L0, lch);
600 spin_unlock_irqrestore(&dma_chan_lock, flags);
601 }
602
omap_request_dma(int dev_id,const char * dev_name,void (* callback)(int lch,u16 ch_status,void * data),void * data,int * dma_ch_out)603 int omap_request_dma(int dev_id, const char *dev_name,
604 void (*callback)(int lch, u16 ch_status, void *data),
605 void *data, int *dma_ch_out)
606 {
607 int ch, free_ch = -1;
608 unsigned long flags;
609 struct omap_dma_lch *chan;
610
611 WARN(strcmp(dev_name, "DMA engine"), "Using deprecated platform DMA API - please update to DMA engine");
612
613 spin_lock_irqsave(&dma_chan_lock, flags);
614 for (ch = 0; ch < dma_chan_count; ch++) {
615 if (free_ch == -1 && dma_chan[ch].dev_id == -1) {
616 free_ch = ch;
617 /* Exit after first free channel found */
618 break;
619 }
620 }
621 if (free_ch == -1) {
622 spin_unlock_irqrestore(&dma_chan_lock, flags);
623 return -EBUSY;
624 }
625 chan = dma_chan + free_ch;
626 chan->dev_id = dev_id;
627
628 if (p->clear_lch_regs)
629 p->clear_lch_regs(free_ch);
630
631 if (dma_omap2plus())
632 omap_clear_dma(free_ch);
633
634 spin_unlock_irqrestore(&dma_chan_lock, flags);
635
636 chan->dev_name = dev_name;
637 chan->callback = callback;
638 chan->data = data;
639 chan->flags = 0;
640
641 #ifndef CONFIG_ARCH_OMAP1
642 if (dma_omap2plus()) {
643 chan->chain_id = -1;
644 chan->next_linked_ch = -1;
645 }
646 #endif
647
648 chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ;
649
650 if (dma_omap1())
651 chan->enabled_irqs |= OMAP1_DMA_TOUT_IRQ;
652 else if (dma_omap2plus())
653 chan->enabled_irqs |= OMAP2_DMA_MISALIGNED_ERR_IRQ |
654 OMAP2_DMA_TRANS_ERR_IRQ;
655
656 if (dma_omap16xx()) {
657 /* If the sync device is set, configure it dynamically. */
658 if (dev_id != 0) {
659 set_gdma_dev(free_ch + 1, dev_id);
660 dev_id = free_ch + 1;
661 }
662 /*
663 * Disable the 1510 compatibility mode and set the sync device
664 * id.
665 */
666 p->dma_write(dev_id | (1 << 10), CCR, free_ch);
667 } else if (dma_omap1()) {
668 p->dma_write(dev_id, CCR, free_ch);
669 }
670
671 if (dma_omap2plus()) {
672 omap_enable_channel_irq(free_ch);
673 omap2_enable_irq_lch(free_ch);
674 }
675
676 *dma_ch_out = free_ch;
677
678 return 0;
679 }
680 EXPORT_SYMBOL(omap_request_dma);
681
omap_free_dma(int lch)682 void omap_free_dma(int lch)
683 {
684 unsigned long flags;
685
686 if (dma_chan[lch].dev_id == -1) {
687 pr_err("omap_dma: trying to free unallocated DMA channel %d\n",
688 lch);
689 return;
690 }
691
692 /* Disable interrupt for logical channel */
693 if (dma_omap2plus())
694 omap2_disable_irq_lch(lch);
695
696 /* Disable all DMA interrupts for the channel. */
697 omap_disable_channel_irq(lch);
698
699 /* Make sure the DMA transfer is stopped. */
700 p->dma_write(0, CCR, lch);
701
702 /* Clear registers */
703 if (dma_omap2plus())
704 omap_clear_dma(lch);
705
706 spin_lock_irqsave(&dma_chan_lock, flags);
707 dma_chan[lch].dev_id = -1;
708 dma_chan[lch].next_lch = -1;
709 dma_chan[lch].callback = NULL;
710 spin_unlock_irqrestore(&dma_chan_lock, flags);
711 }
712 EXPORT_SYMBOL(omap_free_dma);
713
714 /**
715 * @brief omap_dma_set_global_params : Set global priority settings for dma
716 *
717 * @param arb_rate
718 * @param max_fifo_depth
719 * @param tparams - Number of threads to reserve : DMA_THREAD_RESERVE_NORM
720 * DMA_THREAD_RESERVE_ONET
721 * DMA_THREAD_RESERVE_TWOT
722 * DMA_THREAD_RESERVE_THREET
723 */
724 void
omap_dma_set_global_params(int arb_rate,int max_fifo_depth,int tparams)725 omap_dma_set_global_params(int arb_rate, int max_fifo_depth, int tparams)
726 {
727 u32 reg;
728
729 if (dma_omap1()) {
730 printk(KERN_ERR "FIXME: no %s on 15xx/16xx\n", __func__);
731 return;
732 }
733
734 if (max_fifo_depth == 0)
735 max_fifo_depth = 1;
736 if (arb_rate == 0)
737 arb_rate = 1;
738
739 reg = 0xff & max_fifo_depth;
740 reg |= (0x3 & tparams) << 12;
741 reg |= (arb_rate & 0xff) << 16;
742
743 p->dma_write(reg, GCR, 0);
744 }
745 EXPORT_SYMBOL(omap_dma_set_global_params);
746
747 /**
748 * @brief omap_dma_set_prio_lch : Set channel wise priority settings
749 *
750 * @param lch
751 * @param read_prio - Read priority
752 * @param write_prio - Write priority
753 * Both of the above can be set with one of the following values :
754 * DMA_CH_PRIO_HIGH/DMA_CH_PRIO_LOW
755 */
756 static int
omap_dma_set_prio_lch(int lch,unsigned char read_prio,unsigned char write_prio)757 omap_dma_set_prio_lch(int lch, unsigned char read_prio,
758 unsigned char write_prio)
759 {
760 u32 l;
761
762 if (unlikely((lch < 0 || lch >= dma_lch_count))) {
763 printk(KERN_ERR "Invalid channel id\n");
764 return -EINVAL;
765 }
766 l = p->dma_read(CCR, lch);
767 l &= ~((1 << 6) | (1 << 26));
768 if (d->dev_caps & IS_RW_PRIORITY)
769 l |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26);
770 else
771 l |= ((read_prio & 0x1) << 6);
772
773 p->dma_write(l, CCR, lch);
774
775 return 0;
776 }
777
778
779 /*
780 * Clears any DMA state so the DMA engine is ready to restart with new buffers
781 * through omap_start_dma(). Any buffers in flight are discarded.
782 */
omap_clear_dma(int lch)783 static void omap_clear_dma(int lch)
784 {
785 unsigned long flags;
786
787 local_irq_save(flags);
788 p->clear_dma(lch);
789 local_irq_restore(flags);
790 }
791
omap_start_dma(int lch)792 void omap_start_dma(int lch)
793 {
794 u32 l;
795
796 /*
797 * The CPC/CDAC register needs to be initialized to zero
798 * before starting dma transfer.
799 */
800 if (dma_omap15xx())
801 p->dma_write(0, CPC, lch);
802 else
803 p->dma_write(0, CDAC, lch);
804
805 if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
806 int next_lch, cur_lch;
807 char dma_chan_link_map[MAX_LOGICAL_DMA_CH_COUNT];
808
809 /* Set the link register of the first channel */
810 enable_lnk(lch);
811
812 memset(dma_chan_link_map, 0, sizeof(dma_chan_link_map));
813 dma_chan_link_map[lch] = 1;
814
815 cur_lch = dma_chan[lch].next_lch;
816 do {
817 next_lch = dma_chan[cur_lch].next_lch;
818
819 /* The loop case: we've been here already */
820 if (dma_chan_link_map[cur_lch])
821 break;
822 /* Mark the current channel */
823 dma_chan_link_map[cur_lch] = 1;
824
825 enable_lnk(cur_lch);
826 omap_enable_channel_irq(cur_lch);
827
828 cur_lch = next_lch;
829 } while (next_lch != -1);
830 } else if (IS_DMA_ERRATA(DMA_ERRATA_PARALLEL_CHANNELS))
831 p->dma_write(lch, CLNK_CTRL, lch);
832
833 omap_enable_channel_irq(lch);
834
835 l = p->dma_read(CCR, lch);
836
837 if (IS_DMA_ERRATA(DMA_ERRATA_IFRAME_BUFFERING))
838 l |= OMAP_DMA_CCR_BUFFERING_DISABLE;
839 l |= OMAP_DMA_CCR_EN;
840
841 /*
842 * As dma_write() uses IO accessors which are weakly ordered, there
843 * is no guarantee that data in coherent DMA memory will be visible
844 * to the DMA device. Add a memory barrier here to ensure that any
845 * such data is visible prior to enabling DMA.
846 */
847 mb();
848 p->dma_write(l, CCR, lch);
849
850 dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
851 }
852 EXPORT_SYMBOL(omap_start_dma);
853
omap_stop_dma(int lch)854 void omap_stop_dma(int lch)
855 {
856 u32 l;
857
858 /* Disable all interrupts on the channel */
859 omap_disable_channel_irq(lch);
860
861 l = p->dma_read(CCR, lch);
862 if (IS_DMA_ERRATA(DMA_ERRATA_i541) &&
863 (l & OMAP_DMA_CCR_SEL_SRC_DST_SYNC)) {
864 int i = 0;
865 u32 sys_cf;
866
867 /* Configure No-Standby */
868 l = p->dma_read(OCP_SYSCONFIG, lch);
869 sys_cf = l;
870 l &= ~DMA_SYSCONFIG_MIDLEMODE_MASK;
871 l |= DMA_SYSCONFIG_MIDLEMODE(DMA_IDLEMODE_NO_IDLE);
872 p->dma_write(l , OCP_SYSCONFIG, 0);
873
874 l = p->dma_read(CCR, lch);
875 l &= ~OMAP_DMA_CCR_EN;
876 p->dma_write(l, CCR, lch);
877
878 /* Wait for sDMA FIFO drain */
879 l = p->dma_read(CCR, lch);
880 while (i < 100 && (l & (OMAP_DMA_CCR_RD_ACTIVE |
881 OMAP_DMA_CCR_WR_ACTIVE))) {
882 udelay(5);
883 i++;
884 l = p->dma_read(CCR, lch);
885 }
886 if (i >= 100)
887 pr_err("DMA drain did not complete on lch %d\n", lch);
888 /* Restore OCP_SYSCONFIG */
889 p->dma_write(sys_cf, OCP_SYSCONFIG, lch);
890 } else {
891 l &= ~OMAP_DMA_CCR_EN;
892 p->dma_write(l, CCR, lch);
893 }
894
895 /*
896 * Ensure that data transferred by DMA is visible to any access
897 * after DMA has been disabled. This is important for coherent
898 * DMA regions.
899 */
900 mb();
901
902 if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
903 int next_lch, cur_lch = lch;
904 char dma_chan_link_map[MAX_LOGICAL_DMA_CH_COUNT];
905
906 memset(dma_chan_link_map, 0, sizeof(dma_chan_link_map));
907 do {
908 /* The loop case: we've been here already */
909 if (dma_chan_link_map[cur_lch])
910 break;
911 /* Mark the current channel */
912 dma_chan_link_map[cur_lch] = 1;
913
914 disable_lnk(cur_lch);
915
916 next_lch = dma_chan[cur_lch].next_lch;
917 cur_lch = next_lch;
918 } while (next_lch != -1);
919 }
920
921 dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
922 }
923 EXPORT_SYMBOL(omap_stop_dma);
924
925 /*
926 * Allows changing the DMA callback function or data. This may be needed if
927 * the driver shares a single DMA channel for multiple dma triggers.
928 */
omap_set_dma_callback(int lch,void (* callback)(int lch,u16 ch_status,void * data),void * data)929 int omap_set_dma_callback(int lch,
930 void (*callback)(int lch, u16 ch_status, void *data),
931 void *data)
932 {
933 unsigned long flags;
934
935 if (lch < 0)
936 return -ENODEV;
937
938 spin_lock_irqsave(&dma_chan_lock, flags);
939 if (dma_chan[lch].dev_id == -1) {
940 printk(KERN_ERR "DMA callback for not set for free channel\n");
941 spin_unlock_irqrestore(&dma_chan_lock, flags);
942 return -EINVAL;
943 }
944 dma_chan[lch].callback = callback;
945 dma_chan[lch].data = data;
946 spin_unlock_irqrestore(&dma_chan_lock, flags);
947
948 return 0;
949 }
950 EXPORT_SYMBOL(omap_set_dma_callback);
951
952 /*
953 * Returns current physical source address for the given DMA channel.
954 * If the channel is running the caller must disable interrupts prior calling
955 * this function and process the returned value before re-enabling interrupt to
956 * prevent races with the interrupt handler. Note that in continuous mode there
957 * is a chance for CSSA_L register overflow between the two reads resulting
958 * in incorrect return value.
959 */
omap_get_dma_src_pos(int lch)960 dma_addr_t omap_get_dma_src_pos(int lch)
961 {
962 dma_addr_t offset = 0;
963
964 if (dma_omap15xx())
965 offset = p->dma_read(CPC, lch);
966 else
967 offset = p->dma_read(CSAC, lch);
968
969 if (IS_DMA_ERRATA(DMA_ERRATA_3_3) && offset == 0)
970 offset = p->dma_read(CSAC, lch);
971
972 if (!dma_omap15xx()) {
973 /*
974 * CDAC == 0 indicates that the DMA transfer on the channel has
975 * not been started (no data has been transferred so far).
976 * Return the programmed source start address in this case.
977 */
978 if (likely(p->dma_read(CDAC, lch)))
979 offset = p->dma_read(CSAC, lch);
980 else
981 offset = p->dma_read(CSSA, lch);
982 }
983
984 if (dma_omap1())
985 offset |= (p->dma_read(CSSA, lch) & 0xFFFF0000);
986
987 return offset;
988 }
989 EXPORT_SYMBOL(omap_get_dma_src_pos);
990
991 /*
992 * Returns current physical destination address for the given DMA channel.
993 * If the channel is running the caller must disable interrupts prior calling
994 * this function and process the returned value before re-enabling interrupt to
995 * prevent races with the interrupt handler. Note that in continuous mode there
996 * is a chance for CDSA_L register overflow between the two reads resulting
997 * in incorrect return value.
998 */
omap_get_dma_dst_pos(int lch)999 dma_addr_t omap_get_dma_dst_pos(int lch)
1000 {
1001 dma_addr_t offset = 0;
1002
1003 if (dma_omap15xx())
1004 offset = p->dma_read(CPC, lch);
1005 else
1006 offset = p->dma_read(CDAC, lch);
1007
1008 /*
1009 * omap 3.2/3.3 erratum: sometimes 0 is returned if CSAC/CDAC is
1010 * read before the DMA controller finished disabling the channel.
1011 */
1012 if (!dma_omap15xx() && offset == 0) {
1013 offset = p->dma_read(CDAC, lch);
1014 /*
1015 * CDAC == 0 indicates that the DMA transfer on the channel has
1016 * not been started (no data has been transferred so far).
1017 * Return the programmed destination start address in this case.
1018 */
1019 if (unlikely(!offset))
1020 offset = p->dma_read(CDSA, lch);
1021 }
1022
1023 if (dma_omap1())
1024 offset |= (p->dma_read(CDSA, lch) & 0xFFFF0000);
1025
1026 return offset;
1027 }
1028 EXPORT_SYMBOL(omap_get_dma_dst_pos);
1029
omap_get_dma_active_status(int lch)1030 int omap_get_dma_active_status(int lch)
1031 {
1032 return (p->dma_read(CCR, lch) & OMAP_DMA_CCR_EN) != 0;
1033 }
1034 EXPORT_SYMBOL(omap_get_dma_active_status);
1035
omap_dma_running(void)1036 int omap_dma_running(void)
1037 {
1038 int lch;
1039
1040 if (dma_omap1())
1041 if (omap_lcd_dma_running())
1042 return 1;
1043
1044 for (lch = 0; lch < dma_chan_count; lch++)
1045 if (p->dma_read(CCR, lch) & OMAP_DMA_CCR_EN)
1046 return 1;
1047
1048 return 0;
1049 }
1050
1051 /*
1052 * lch_queue DMA will start right after lch_head one is finished.
1053 * For this DMA link to start, you still need to start (see omap_start_dma)
1054 * the first one. That will fire up the entire queue.
1055 */
omap_dma_link_lch(int lch_head,int lch_queue)1056 void omap_dma_link_lch(int lch_head, int lch_queue)
1057 {
1058 if (omap_dma_in_1510_mode()) {
1059 if (lch_head == lch_queue) {
1060 p->dma_write(p->dma_read(CCR, lch_head) | (3 << 8),
1061 CCR, lch_head);
1062 return;
1063 }
1064 printk(KERN_ERR "DMA linking is not supported in 1510 mode\n");
1065 BUG();
1066 return;
1067 }
1068
1069 if ((dma_chan[lch_head].dev_id == -1) ||
1070 (dma_chan[lch_queue].dev_id == -1)) {
1071 pr_err("omap_dma: trying to link non requested channels\n");
1072 dump_stack();
1073 }
1074
1075 dma_chan[lch_head].next_lch = lch_queue;
1076 }
1077 EXPORT_SYMBOL(omap_dma_link_lch);
1078
1079 /*----------------------------------------------------------------------------*/
1080
1081 #ifdef CONFIG_ARCH_OMAP1
1082
omap1_dma_handle_ch(int ch)1083 static int omap1_dma_handle_ch(int ch)
1084 {
1085 u32 csr;
1086
1087 if (enable_1510_mode && ch >= 6) {
1088 csr = dma_chan[ch].saved_csr;
1089 dma_chan[ch].saved_csr = 0;
1090 } else
1091 csr = p->dma_read(CSR, ch);
1092 if (enable_1510_mode && ch <= 2 && (csr >> 7) != 0) {
1093 dma_chan[ch + 6].saved_csr = csr >> 7;
1094 csr &= 0x7f;
1095 }
1096 if ((csr & 0x3f) == 0)
1097 return 0;
1098 if (unlikely(dma_chan[ch].dev_id == -1)) {
1099 pr_warn("Spurious interrupt from DMA channel %d (CSR %04x)\n",
1100 ch, csr);
1101 return 0;
1102 }
1103 if (unlikely(csr & OMAP1_DMA_TOUT_IRQ))
1104 pr_warn("DMA timeout with device %d\n", dma_chan[ch].dev_id);
1105 if (unlikely(csr & OMAP_DMA_DROP_IRQ))
1106 pr_warn("DMA synchronization event drop occurred with device %d\n",
1107 dma_chan[ch].dev_id);
1108 if (likely(csr & OMAP_DMA_BLOCK_IRQ))
1109 dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE;
1110 if (likely(dma_chan[ch].callback != NULL))
1111 dma_chan[ch].callback(ch, csr, dma_chan[ch].data);
1112
1113 return 1;
1114 }
1115
omap1_dma_irq_handler(int irq,void * dev_id)1116 static irqreturn_t omap1_dma_irq_handler(int irq, void *dev_id)
1117 {
1118 int ch = ((int) dev_id) - 1;
1119 int handled = 0;
1120
1121 for (;;) {
1122 int handled_now = 0;
1123
1124 handled_now += omap1_dma_handle_ch(ch);
1125 if (enable_1510_mode && dma_chan[ch + 6].saved_csr)
1126 handled_now += omap1_dma_handle_ch(ch + 6);
1127 if (!handled_now)
1128 break;
1129 handled += handled_now;
1130 }
1131
1132 return handled ? IRQ_HANDLED : IRQ_NONE;
1133 }
1134
1135 #else
1136 #define omap1_dma_irq_handler NULL
1137 #endif
1138
1139 #ifdef CONFIG_ARCH_OMAP2PLUS
1140
omap2_dma_handle_ch(int ch)1141 static int omap2_dma_handle_ch(int ch)
1142 {
1143 u32 status = p->dma_read(CSR, ch);
1144
1145 if (!status) {
1146 if (printk_ratelimit())
1147 pr_warn("Spurious DMA IRQ for lch %d\n", ch);
1148 p->dma_write(1 << ch, IRQSTATUS_L0, ch);
1149 return 0;
1150 }
1151 if (unlikely(dma_chan[ch].dev_id == -1)) {
1152 if (printk_ratelimit())
1153 pr_warn("IRQ %04x for non-allocated DMA channel %d\n",
1154 status, ch);
1155 return 0;
1156 }
1157 if (unlikely(status & OMAP_DMA_DROP_IRQ))
1158 pr_info("DMA synchronization event drop occurred with device %d\n",
1159 dma_chan[ch].dev_id);
1160 if (unlikely(status & OMAP2_DMA_TRANS_ERR_IRQ)) {
1161 printk(KERN_INFO "DMA transaction error with device %d\n",
1162 dma_chan[ch].dev_id);
1163 if (IS_DMA_ERRATA(DMA_ERRATA_i378)) {
1164 u32 ccr;
1165
1166 ccr = p->dma_read(CCR, ch);
1167 ccr &= ~OMAP_DMA_CCR_EN;
1168 p->dma_write(ccr, CCR, ch);
1169 dma_chan[ch].flags &= ~OMAP_DMA_ACTIVE;
1170 }
1171 }
1172 if (unlikely(status & OMAP2_DMA_SECURE_ERR_IRQ))
1173 printk(KERN_INFO "DMA secure error with device %d\n",
1174 dma_chan[ch].dev_id);
1175 if (unlikely(status & OMAP2_DMA_MISALIGNED_ERR_IRQ))
1176 printk(KERN_INFO "DMA misaligned error with device %d\n",
1177 dma_chan[ch].dev_id);
1178
1179 p->dma_write(status, CSR, ch);
1180 p->dma_write(1 << ch, IRQSTATUS_L0, ch);
1181 /* read back the register to flush the write */
1182 p->dma_read(IRQSTATUS_L0, ch);
1183
1184 /* If the ch is not chained then chain_id will be -1 */
1185 if (dma_chan[ch].chain_id != -1) {
1186 int chain_id = dma_chan[ch].chain_id;
1187 dma_chan[ch].state = DMA_CH_NOTSTARTED;
1188 if (p->dma_read(CLNK_CTRL, ch) & (1 << 15))
1189 dma_chan[dma_chan[ch].next_linked_ch].state =
1190 DMA_CH_STARTED;
1191 if (dma_linked_lch[chain_id].chain_mode ==
1192 OMAP_DMA_DYNAMIC_CHAIN)
1193 disable_lnk(ch);
1194
1195 if (!OMAP_DMA_CHAIN_QEMPTY(chain_id))
1196 OMAP_DMA_CHAIN_INCQHEAD(chain_id);
1197
1198 status = p->dma_read(CSR, ch);
1199 p->dma_write(status, CSR, ch);
1200 }
1201
1202 if (likely(dma_chan[ch].callback != NULL))
1203 dma_chan[ch].callback(ch, status, dma_chan[ch].data);
1204
1205 return 0;
1206 }
1207
1208 /* STATUS register count is from 1-32 while our is 0-31 */
omap2_dma_irq_handler(int irq,void * dev_id)1209 static irqreturn_t omap2_dma_irq_handler(int irq, void *dev_id)
1210 {
1211 u32 val, enable_reg;
1212 int i;
1213
1214 val = p->dma_read(IRQSTATUS_L0, 0);
1215 if (val == 0) {
1216 if (printk_ratelimit())
1217 printk(KERN_WARNING "Spurious DMA IRQ\n");
1218 return IRQ_HANDLED;
1219 }
1220 enable_reg = p->dma_read(IRQENABLE_L0, 0);
1221 val &= enable_reg; /* Dispatch only relevant interrupts */
1222 for (i = 0; i < dma_lch_count && val != 0; i++) {
1223 if (val & 1)
1224 omap2_dma_handle_ch(i);
1225 val >>= 1;
1226 }
1227
1228 return IRQ_HANDLED;
1229 }
1230
1231 static struct irqaction omap24xx_dma_irq = {
1232 .name = "DMA",
1233 .handler = omap2_dma_irq_handler,
1234 };
1235
1236 #else
1237 static struct irqaction omap24xx_dma_irq;
1238 #endif
1239
1240 /*----------------------------------------------------------------------------*/
1241
1242 /*
1243 * Note that we are currently using only IRQENABLE_L0 and L1.
1244 * As the DSP may be using IRQENABLE_L2 and L3, let's not
1245 * touch those for now.
1246 */
omap_dma_global_context_save(void)1247 void omap_dma_global_context_save(void)
1248 {
1249 omap_dma_global_context.dma_irqenable_l0 =
1250 p->dma_read(IRQENABLE_L0, 0);
1251 omap_dma_global_context.dma_irqenable_l1 =
1252 p->dma_read(IRQENABLE_L1, 0);
1253 omap_dma_global_context.dma_ocp_sysconfig =
1254 p->dma_read(OCP_SYSCONFIG, 0);
1255 omap_dma_global_context.dma_gcr = p->dma_read(GCR, 0);
1256 }
1257
omap_dma_global_context_restore(void)1258 void omap_dma_global_context_restore(void)
1259 {
1260 int ch;
1261
1262 p->dma_write(omap_dma_global_context.dma_gcr, GCR, 0);
1263 p->dma_write(omap_dma_global_context.dma_ocp_sysconfig,
1264 OCP_SYSCONFIG, 0);
1265 p->dma_write(omap_dma_global_context.dma_irqenable_l0,
1266 IRQENABLE_L0, 0);
1267 p->dma_write(omap_dma_global_context.dma_irqenable_l1,
1268 IRQENABLE_L1, 0);
1269
1270 if (IS_DMA_ERRATA(DMA_ROMCODE_BUG))
1271 p->dma_write(0x3 , IRQSTATUS_L0, 0);
1272
1273 for (ch = 0; ch < dma_chan_count; ch++)
1274 if (dma_chan[ch].dev_id != -1)
1275 omap_clear_dma(ch);
1276 }
1277
omap_get_plat_info(void)1278 struct omap_system_dma_plat_info *omap_get_plat_info(void)
1279 {
1280 return p;
1281 }
1282 EXPORT_SYMBOL_GPL(omap_get_plat_info);
1283
omap_system_dma_probe(struct platform_device * pdev)1284 static int omap_system_dma_probe(struct platform_device *pdev)
1285 {
1286 int ch, ret = 0;
1287 int dma_irq;
1288 char irq_name[4];
1289 int irq_rel;
1290
1291 p = pdev->dev.platform_data;
1292 if (!p) {
1293 dev_err(&pdev->dev,
1294 "%s: System DMA initialized without platform data\n",
1295 __func__);
1296 return -EINVAL;
1297 }
1298
1299 d = p->dma_attr;
1300 errata = p->errata;
1301
1302 if ((d->dev_caps & RESERVE_CHANNEL) && omap_dma_reserve_channels
1303 && (omap_dma_reserve_channels < d->lch_count))
1304 d->lch_count = omap_dma_reserve_channels;
1305
1306 dma_lch_count = d->lch_count;
1307 dma_chan_count = dma_lch_count;
1308 enable_1510_mode = d->dev_caps & ENABLE_1510_MODE;
1309
1310 dma_chan = devm_kcalloc(&pdev->dev, dma_lch_count,
1311 sizeof(*dma_chan), GFP_KERNEL);
1312 if (!dma_chan)
1313 return -ENOMEM;
1314
1315 if (dma_omap2plus()) {
1316 dma_linked_lch = kcalloc(dma_lch_count,
1317 sizeof(*dma_linked_lch),
1318 GFP_KERNEL);
1319 if (!dma_linked_lch) {
1320 ret = -ENOMEM;
1321 goto exit_dma_lch_fail;
1322 }
1323 }
1324
1325 spin_lock_init(&dma_chan_lock);
1326 for (ch = 0; ch < dma_chan_count; ch++) {
1327 omap_clear_dma(ch);
1328 if (dma_omap2plus())
1329 omap2_disable_irq_lch(ch);
1330
1331 dma_chan[ch].dev_id = -1;
1332 dma_chan[ch].next_lch = -1;
1333
1334 if (ch >= 6 && enable_1510_mode)
1335 continue;
1336
1337 if (dma_omap1()) {
1338 /*
1339 * request_irq() doesn't like dev_id (ie. ch) being
1340 * zero, so we have to kludge around this.
1341 */
1342 sprintf(&irq_name[0], "%d", ch);
1343 dma_irq = platform_get_irq_byname(pdev, irq_name);
1344
1345 if (dma_irq < 0) {
1346 ret = dma_irq;
1347 goto exit_dma_irq_fail;
1348 }
1349
1350 /* INT_DMA_LCD is handled in lcd_dma.c */
1351 if (dma_irq == INT_DMA_LCD)
1352 continue;
1353
1354 ret = request_irq(dma_irq,
1355 omap1_dma_irq_handler, 0, "DMA",
1356 (void *) (ch + 1));
1357 if (ret != 0)
1358 goto exit_dma_irq_fail;
1359 }
1360 }
1361
1362 if (d->dev_caps & IS_RW_PRIORITY)
1363 omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE,
1364 DMA_DEFAULT_FIFO_DEPTH, 0);
1365
1366 if (dma_omap2plus() && !(d->dev_caps & DMA_ENGINE_HANDLE_IRQ)) {
1367 strcpy(irq_name, "0");
1368 dma_irq = platform_get_irq_byname(pdev, irq_name);
1369 if (dma_irq < 0) {
1370 dev_err(&pdev->dev, "failed: request IRQ %d", dma_irq);
1371 ret = dma_irq;
1372 goto exit_dma_lch_fail;
1373 }
1374 ret = setup_irq(dma_irq, &omap24xx_dma_irq);
1375 if (ret) {
1376 dev_err(&pdev->dev, "set_up failed for IRQ %d for DMA (error %d)\n",
1377 dma_irq, ret);
1378 goto exit_dma_lch_fail;
1379 }
1380 }
1381
1382 /* reserve dma channels 0 and 1 in high security devices on 34xx */
1383 if (d->dev_caps & HS_CHANNELS_RESERVED) {
1384 pr_info("Reserving DMA channels 0 and 1 for HS ROM code\n");
1385 dma_chan[0].dev_id = 0;
1386 dma_chan[1].dev_id = 1;
1387 }
1388 p->show_dma_caps();
1389 return 0;
1390
1391 exit_dma_irq_fail:
1392 dev_err(&pdev->dev, "unable to request IRQ %d for DMA (error %d)\n",
1393 dma_irq, ret);
1394 for (irq_rel = 0; irq_rel < ch; irq_rel++) {
1395 dma_irq = platform_get_irq(pdev, irq_rel);
1396 free_irq(dma_irq, (void *)(irq_rel + 1));
1397 }
1398
1399 exit_dma_lch_fail:
1400 return ret;
1401 }
1402
omap_system_dma_remove(struct platform_device * pdev)1403 static int omap_system_dma_remove(struct platform_device *pdev)
1404 {
1405 int dma_irq;
1406
1407 if (dma_omap2plus()) {
1408 char irq_name[4];
1409 strcpy(irq_name, "0");
1410 dma_irq = platform_get_irq_byname(pdev, irq_name);
1411 if (dma_irq >= 0)
1412 remove_irq(dma_irq, &omap24xx_dma_irq);
1413 } else {
1414 int irq_rel = 0;
1415 for ( ; irq_rel < dma_chan_count; irq_rel++) {
1416 dma_irq = platform_get_irq(pdev, irq_rel);
1417 free_irq(dma_irq, (void *)(irq_rel + 1));
1418 }
1419 }
1420 return 0;
1421 }
1422
1423 static struct platform_driver omap_system_dma_driver = {
1424 .probe = omap_system_dma_probe,
1425 .remove = omap_system_dma_remove,
1426 .driver = {
1427 .name = "omap_dma_system"
1428 },
1429 };
1430
omap_system_dma_init(void)1431 static int __init omap_system_dma_init(void)
1432 {
1433 return platform_driver_register(&omap_system_dma_driver);
1434 }
1435 arch_initcall(omap_system_dma_init);
1436
omap_system_dma_exit(void)1437 static void __exit omap_system_dma_exit(void)
1438 {
1439 platform_driver_unregister(&omap_system_dma_driver);
1440 }
1441
1442 MODULE_DESCRIPTION("OMAP SYSTEM DMA DRIVER");
1443 MODULE_LICENSE("GPL");
1444 MODULE_AUTHOR("Texas Instruments Inc");
1445
1446 /*
1447 * Reserve the omap SDMA channels using cmdline bootarg
1448 * "omap_dma_reserve_ch=". The valid range is 1 to 32
1449 */
omap_dma_cmdline_reserve_ch(char * str)1450 static int __init omap_dma_cmdline_reserve_ch(char *str)
1451 {
1452 if (get_option(&str, &omap_dma_reserve_channels) != 1)
1453 omap_dma_reserve_channels = 0;
1454 return 1;
1455 }
1456
1457 __setup("omap_dma_reserve_ch=", omap_dma_cmdline_reserve_ch);
1458
1459
1460