1 /*
2  * Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
3  *
4  * This program is free software; you can redistribute it and/or modify
5  * it under the terms of the GNU General Public License version 2 and
6  * only version 2 as published by the Free Software Foundation.
7  *
8  * This program is distributed in the hope that it will be useful,
9  * but WITHOUT ANY WARRANTY; without even the implied warranty of
10  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
11  * GNU General Public License for more details.
12  */
13 
14 #include <linux/clk.h>
15 #include <linux/gpio/consumer.h>
16 #include <linux/regulator/consumer.h>
17 #include <drm/drm_crtc.h>
18 #include <drm/drm_dp_helper.h>
19 #include <drm/drm_edid.h>
20 
21 #include "edp.h"
22 #include "edp.xml.h"
23 
24 #define VDDA_UA_ON_LOAD		100000	/* uA units */
25 #define VDDA_UA_OFF_LOAD	100	/* uA units */
26 
27 #define DPCD_LINK_VOLTAGE_MAX		4
28 #define DPCD_LINK_PRE_EMPHASIS_MAX	4
29 
30 #define EDP_LINK_BW_MAX		DP_LINK_BW_2_7
31 
32 /* Link training return value */
33 #define EDP_TRAIN_FAIL		-1
34 #define EDP_TRAIN_SUCCESS	0
35 #define EDP_TRAIN_RECONFIG	1
36 
37 #define EDP_CLK_MASK_AHB		BIT(0)
38 #define EDP_CLK_MASK_AUX		BIT(1)
39 #define EDP_CLK_MASK_LINK		BIT(2)
40 #define EDP_CLK_MASK_PIXEL		BIT(3)
41 #define EDP_CLK_MASK_MDP_CORE		BIT(4)
42 #define EDP_CLK_MASK_LINK_CHAN	(EDP_CLK_MASK_LINK | EDP_CLK_MASK_PIXEL)
43 #define EDP_CLK_MASK_AUX_CHAN	\
44 	(EDP_CLK_MASK_AHB | EDP_CLK_MASK_AUX | EDP_CLK_MASK_MDP_CORE)
45 #define EDP_CLK_MASK_ALL	(EDP_CLK_MASK_AUX_CHAN | EDP_CLK_MASK_LINK_CHAN)
46 
47 #define EDP_BACKLIGHT_MAX	255
48 
49 #define EDP_INTR_STATUS1	\
50 	(EDP_INTERRUPT_REG_1_HPD | EDP_INTERRUPT_REG_1_AUX_I2C_DONE | \
51 	EDP_INTERRUPT_REG_1_WRONG_ADDR | EDP_INTERRUPT_REG_1_TIMEOUT | \
52 	EDP_INTERRUPT_REG_1_NACK_DEFER | EDP_INTERRUPT_REG_1_WRONG_DATA_CNT | \
53 	EDP_INTERRUPT_REG_1_I2C_NACK | EDP_INTERRUPT_REG_1_I2C_DEFER | \
54 	EDP_INTERRUPT_REG_1_PLL_UNLOCK | EDP_INTERRUPT_REG_1_AUX_ERROR)
55 #define EDP_INTR_MASK1	(EDP_INTR_STATUS1 << 2)
56 #define EDP_INTR_STATUS2	\
57 	(EDP_INTERRUPT_REG_2_READY_FOR_VIDEO | \
58 	EDP_INTERRUPT_REG_2_IDLE_PATTERNs_SENT | \
59 	EDP_INTERRUPT_REG_2_FRAME_END | EDP_INTERRUPT_REG_2_CRC_UPDATED)
60 #define EDP_INTR_MASK2	(EDP_INTR_STATUS2 << 2)
61 
62 struct edp_ctrl {
63 	struct platform_device *pdev;
64 
65 	void __iomem *base;
66 
67 	/* regulators */
68 	struct regulator *vdda_vreg;	/* 1.8 V */
69 	struct regulator *lvl_vreg;
70 
71 	/* clocks */
72 	struct clk *aux_clk;
73 	struct clk *pixel_clk;
74 	struct clk *ahb_clk;
75 	struct clk *link_clk;
76 	struct clk *mdp_core_clk;
77 
78 	/* gpios */
79 	struct gpio_desc *panel_en_gpio;
80 	struct gpio_desc *panel_hpd_gpio;
81 
82 	/* completion and mutex */
83 	struct completion idle_comp;
84 	struct mutex dev_mutex; /* To protect device power status */
85 
86 	/* work queue */
87 	struct work_struct on_work;
88 	struct work_struct off_work;
89 	struct workqueue_struct *workqueue;
90 
91 	/* Interrupt register lock */
92 	spinlock_t irq_lock;
93 
94 	bool edp_connected;
95 	bool power_on;
96 
97 	/* edid raw data */
98 	struct edid *edid;
99 
100 	struct drm_dp_link dp_link;
101 	struct drm_dp_aux *drm_aux;
102 
103 	/* dpcd raw data */
104 	u8 dpcd[DP_RECEIVER_CAP_SIZE];
105 
106 	/* Link status */
107 	u8 link_rate;
108 	u8 lane_cnt;
109 	u8 v_level;
110 	u8 p_level;
111 
112 	/* Timing status */
113 	u8 interlaced;
114 	u32 pixel_rate; /* in kHz */
115 	u32 color_depth;
116 
117 	struct edp_aux *aux;
118 	struct edp_phy *phy;
119 };
120 
121 struct edp_pixel_clk_div {
122 	u32 rate; /* in kHz */
123 	u32 m;
124 	u32 n;
125 };
126 
127 #define EDP_PIXEL_CLK_NUM 8
128 static const struct edp_pixel_clk_div clk_divs[2][EDP_PIXEL_CLK_NUM] = {
129 	{ /* Link clock = 162MHz, source clock = 810MHz */
130 		{119000, 31,  211}, /* WSXGA+ 1680x1050@60Hz CVT */
131 		{130250, 32,  199}, /* UXGA 1600x1200@60Hz CVT */
132 		{148500, 11,  60},  /* FHD 1920x1080@60Hz */
133 		{154000, 50,  263}, /* WUXGA 1920x1200@60Hz CVT */
134 		{209250, 31,  120}, /* QXGA 2048x1536@60Hz CVT */
135 		{268500, 119, 359}, /* WQXGA 2560x1600@60Hz CVT */
136 		{138530, 33,  193}, /* AUO B116HAN03.0 Panel */
137 		{141400, 48,  275}, /* AUO B133HTN01.2 Panel */
138 	},
139 	{ /* Link clock = 270MHz, source clock = 675MHz */
140 		{119000, 52,  295}, /* WSXGA+ 1680x1050@60Hz CVT */
141 		{130250, 11,  57},  /* UXGA 1600x1200@60Hz CVT */
142 		{148500, 11,  50},  /* FHD 1920x1080@60Hz */
143 		{154000, 47,  206}, /* WUXGA 1920x1200@60Hz CVT */
144 		{209250, 31,  100}, /* QXGA 2048x1536@60Hz CVT */
145 		{268500, 107, 269}, /* WQXGA 2560x1600@60Hz CVT */
146 		{138530, 63,  307}, /* AUO B116HAN03.0 Panel */
147 		{141400, 53,  253}, /* AUO B133HTN01.2 Panel */
148 	},
149 };
150 
edp_clk_init(struct edp_ctrl * ctrl)151 static int edp_clk_init(struct edp_ctrl *ctrl)
152 {
153 	struct platform_device *pdev = ctrl->pdev;
154 	int ret;
155 
156 	ctrl->aux_clk = msm_clk_get(pdev, "core");
157 	if (IS_ERR(ctrl->aux_clk)) {
158 		ret = PTR_ERR(ctrl->aux_clk);
159 		pr_err("%s: Can't find core clock, %d\n", __func__, ret);
160 		ctrl->aux_clk = NULL;
161 		return ret;
162 	}
163 
164 	ctrl->pixel_clk = msm_clk_get(pdev, "pixel");
165 	if (IS_ERR(ctrl->pixel_clk)) {
166 		ret = PTR_ERR(ctrl->pixel_clk);
167 		pr_err("%s: Can't find pixel clock, %d\n", __func__, ret);
168 		ctrl->pixel_clk = NULL;
169 		return ret;
170 	}
171 
172 	ctrl->ahb_clk = msm_clk_get(pdev, "iface");
173 	if (IS_ERR(ctrl->ahb_clk)) {
174 		ret = PTR_ERR(ctrl->ahb_clk);
175 		pr_err("%s: Can't find iface clock, %d\n", __func__, ret);
176 		ctrl->ahb_clk = NULL;
177 		return ret;
178 	}
179 
180 	ctrl->link_clk = msm_clk_get(pdev, "link");
181 	if (IS_ERR(ctrl->link_clk)) {
182 		ret = PTR_ERR(ctrl->link_clk);
183 		pr_err("%s: Can't find link clock, %d\n", __func__, ret);
184 		ctrl->link_clk = NULL;
185 		return ret;
186 	}
187 
188 	/* need mdp core clock to receive irq */
189 	ctrl->mdp_core_clk = msm_clk_get(pdev, "mdp_core");
190 	if (IS_ERR(ctrl->mdp_core_clk)) {
191 		ret = PTR_ERR(ctrl->mdp_core_clk);
192 		pr_err("%s: Can't find mdp_core clock, %d\n", __func__, ret);
193 		ctrl->mdp_core_clk = NULL;
194 		return ret;
195 	}
196 
197 	return 0;
198 }
199 
edp_clk_enable(struct edp_ctrl * ctrl,u32 clk_mask)200 static int edp_clk_enable(struct edp_ctrl *ctrl, u32 clk_mask)
201 {
202 	int ret;
203 
204 	DBG("mask=%x", clk_mask);
205 	/* ahb_clk should be enabled first */
206 	if (clk_mask & EDP_CLK_MASK_AHB) {
207 		ret = clk_prepare_enable(ctrl->ahb_clk);
208 		if (ret) {
209 			pr_err("%s: Failed to enable ahb clk\n", __func__);
210 			goto f0;
211 		}
212 	}
213 	if (clk_mask & EDP_CLK_MASK_AUX) {
214 		ret = clk_set_rate(ctrl->aux_clk, 19200000);
215 		if (ret) {
216 			pr_err("%s: Failed to set rate aux clk\n", __func__);
217 			goto f1;
218 		}
219 		ret = clk_prepare_enable(ctrl->aux_clk);
220 		if (ret) {
221 			pr_err("%s: Failed to enable aux clk\n", __func__);
222 			goto f1;
223 		}
224 	}
225 	/* Need to set rate and enable link_clk prior to pixel_clk */
226 	if (clk_mask & EDP_CLK_MASK_LINK) {
227 		DBG("edp->link_clk, set_rate %ld",
228 				(unsigned long)ctrl->link_rate * 27000000);
229 		ret = clk_set_rate(ctrl->link_clk,
230 				(unsigned long)ctrl->link_rate * 27000000);
231 		if (ret) {
232 			pr_err("%s: Failed to set rate to link clk\n",
233 				__func__);
234 			goto f2;
235 		}
236 
237 		ret = clk_prepare_enable(ctrl->link_clk);
238 		if (ret) {
239 			pr_err("%s: Failed to enable link clk\n", __func__);
240 			goto f2;
241 		}
242 	}
243 	if (clk_mask & EDP_CLK_MASK_PIXEL) {
244 		DBG("edp->pixel_clk, set_rate %ld",
245 				(unsigned long)ctrl->pixel_rate * 1000);
246 		ret = clk_set_rate(ctrl->pixel_clk,
247 				(unsigned long)ctrl->pixel_rate * 1000);
248 		if (ret) {
249 			pr_err("%s: Failed to set rate to pixel clk\n",
250 				__func__);
251 			goto f3;
252 		}
253 
254 		ret = clk_prepare_enable(ctrl->pixel_clk);
255 		if (ret) {
256 			pr_err("%s: Failed to enable pixel clk\n", __func__);
257 			goto f3;
258 		}
259 	}
260 	if (clk_mask & EDP_CLK_MASK_MDP_CORE) {
261 		ret = clk_prepare_enable(ctrl->mdp_core_clk);
262 		if (ret) {
263 			pr_err("%s: Failed to enable mdp core clk\n", __func__);
264 			goto f4;
265 		}
266 	}
267 
268 	return 0;
269 
270 f4:
271 	if (clk_mask & EDP_CLK_MASK_PIXEL)
272 		clk_disable_unprepare(ctrl->pixel_clk);
273 f3:
274 	if (clk_mask & EDP_CLK_MASK_LINK)
275 		clk_disable_unprepare(ctrl->link_clk);
276 f2:
277 	if (clk_mask & EDP_CLK_MASK_AUX)
278 		clk_disable_unprepare(ctrl->aux_clk);
279 f1:
280 	if (clk_mask & EDP_CLK_MASK_AHB)
281 		clk_disable_unprepare(ctrl->ahb_clk);
282 f0:
283 	return ret;
284 }
285 
edp_clk_disable(struct edp_ctrl * ctrl,u32 clk_mask)286 static void edp_clk_disable(struct edp_ctrl *ctrl, u32 clk_mask)
287 {
288 	if (clk_mask & EDP_CLK_MASK_MDP_CORE)
289 		clk_disable_unprepare(ctrl->mdp_core_clk);
290 	if (clk_mask & EDP_CLK_MASK_PIXEL)
291 		clk_disable_unprepare(ctrl->pixel_clk);
292 	if (clk_mask & EDP_CLK_MASK_LINK)
293 		clk_disable_unprepare(ctrl->link_clk);
294 	if (clk_mask & EDP_CLK_MASK_AUX)
295 		clk_disable_unprepare(ctrl->aux_clk);
296 	if (clk_mask & EDP_CLK_MASK_AHB)
297 		clk_disable_unprepare(ctrl->ahb_clk);
298 }
299 
edp_regulator_init(struct edp_ctrl * ctrl)300 static int edp_regulator_init(struct edp_ctrl *ctrl)
301 {
302 	struct device *dev = &ctrl->pdev->dev;
303 	int ret;
304 
305 	DBG("");
306 	ctrl->vdda_vreg = devm_regulator_get(dev, "vdda");
307 	ret = PTR_ERR_OR_ZERO(ctrl->vdda_vreg);
308 	if (ret) {
309 		pr_err("%s: Could not get vdda reg, ret = %d\n", __func__,
310 				ret);
311 		ctrl->vdda_vreg = NULL;
312 		return ret;
313 	}
314 	ctrl->lvl_vreg = devm_regulator_get(dev, "lvl-vdd");
315 	ret = PTR_ERR_OR_ZERO(ctrl->lvl_vreg);
316 	if (ret) {
317 		pr_err("%s: Could not get lvl-vdd reg, ret = %d\n", __func__,
318 				ret);
319 		ctrl->lvl_vreg = NULL;
320 		return ret;
321 	}
322 
323 	return 0;
324 }
325 
edp_regulator_enable(struct edp_ctrl * ctrl)326 static int edp_regulator_enable(struct edp_ctrl *ctrl)
327 {
328 	int ret;
329 
330 	ret = regulator_set_load(ctrl->vdda_vreg, VDDA_UA_ON_LOAD);
331 	if (ret < 0) {
332 		pr_err("%s: vdda_vreg set regulator mode failed.\n", __func__);
333 		goto vdda_set_fail;
334 	}
335 
336 	ret = regulator_enable(ctrl->vdda_vreg);
337 	if (ret) {
338 		pr_err("%s: Failed to enable vdda_vreg regulator.\n", __func__);
339 		goto vdda_enable_fail;
340 	}
341 
342 	ret = regulator_enable(ctrl->lvl_vreg);
343 	if (ret) {
344 		pr_err("Failed to enable lvl-vdd reg regulator, %d", ret);
345 		goto lvl_enable_fail;
346 	}
347 
348 	DBG("exit");
349 	return 0;
350 
351 lvl_enable_fail:
352 	regulator_disable(ctrl->vdda_vreg);
353 vdda_enable_fail:
354 	regulator_set_load(ctrl->vdda_vreg, VDDA_UA_OFF_LOAD);
355 vdda_set_fail:
356 	return ret;
357 }
358 
edp_regulator_disable(struct edp_ctrl * ctrl)359 static void edp_regulator_disable(struct edp_ctrl *ctrl)
360 {
361 	regulator_disable(ctrl->lvl_vreg);
362 	regulator_disable(ctrl->vdda_vreg);
363 	regulator_set_load(ctrl->vdda_vreg, VDDA_UA_OFF_LOAD);
364 }
365 
edp_gpio_config(struct edp_ctrl * ctrl)366 static int edp_gpio_config(struct edp_ctrl *ctrl)
367 {
368 	struct device *dev = &ctrl->pdev->dev;
369 	int ret;
370 
371 	ctrl->panel_hpd_gpio = devm_gpiod_get(dev, "panel-hpd", GPIOD_IN);
372 	if (IS_ERR(ctrl->panel_hpd_gpio)) {
373 		ret = PTR_ERR(ctrl->panel_hpd_gpio);
374 		ctrl->panel_hpd_gpio = NULL;
375 		pr_err("%s: cannot get panel-hpd-gpios, %d\n", __func__, ret);
376 		return ret;
377 	}
378 
379 	ctrl->panel_en_gpio = devm_gpiod_get(dev, "panel-en", GPIOD_OUT_LOW);
380 	if (IS_ERR(ctrl->panel_en_gpio)) {
381 		ret = PTR_ERR(ctrl->panel_en_gpio);
382 		ctrl->panel_en_gpio = NULL;
383 		pr_err("%s: cannot get panel-en-gpios, %d\n", __func__, ret);
384 		return ret;
385 	}
386 
387 	DBG("gpio on");
388 
389 	return 0;
390 }
391 
edp_ctrl_irq_enable(struct edp_ctrl * ctrl,int enable)392 static void edp_ctrl_irq_enable(struct edp_ctrl *ctrl, int enable)
393 {
394 	unsigned long flags;
395 
396 	DBG("%d", enable);
397 	spin_lock_irqsave(&ctrl->irq_lock, flags);
398 	if (enable) {
399 		edp_write(ctrl->base + REG_EDP_INTERRUPT_REG_1, EDP_INTR_MASK1);
400 		edp_write(ctrl->base + REG_EDP_INTERRUPT_REG_2, EDP_INTR_MASK2);
401 	} else {
402 		edp_write(ctrl->base + REG_EDP_INTERRUPT_REG_1, 0x0);
403 		edp_write(ctrl->base + REG_EDP_INTERRUPT_REG_2, 0x0);
404 	}
405 	spin_unlock_irqrestore(&ctrl->irq_lock, flags);
406 	DBG("exit");
407 }
408 
edp_fill_link_cfg(struct edp_ctrl * ctrl)409 static void edp_fill_link_cfg(struct edp_ctrl *ctrl)
410 {
411 	u32 prate;
412 	u32 lrate;
413 	u32 bpp;
414 	u8 max_lane = ctrl->dp_link.num_lanes;
415 	u8 lane;
416 
417 	prate = ctrl->pixel_rate;
418 	bpp = ctrl->color_depth * 3;
419 
420 	/*
421 	 * By default, use the maximum link rate and minimum lane count,
422 	 * so that we can do rate down shift during link training.
423 	 */
424 	ctrl->link_rate = drm_dp_link_rate_to_bw_code(ctrl->dp_link.rate);
425 
426 	prate *= bpp;
427 	prate /= 8; /* in kByte */
428 
429 	lrate = 270000; /* in kHz */
430 	lrate *= ctrl->link_rate;
431 	lrate /= 10; /* in kByte, 10 bits --> 8 bits */
432 
433 	for (lane = 1; lane <= max_lane; lane <<= 1) {
434 		if (lrate >= prate)
435 			break;
436 		lrate <<= 1;
437 	}
438 
439 	ctrl->lane_cnt = lane;
440 	DBG("rate=%d lane=%d", ctrl->link_rate, ctrl->lane_cnt);
441 }
442 
edp_config_ctrl(struct edp_ctrl * ctrl)443 static void edp_config_ctrl(struct edp_ctrl *ctrl)
444 {
445 	u32 data;
446 	enum edp_color_depth depth;
447 
448 	data = EDP_CONFIGURATION_CTRL_LANES(ctrl->lane_cnt - 1);
449 
450 	if (ctrl->dp_link.capabilities & DP_LINK_CAP_ENHANCED_FRAMING)
451 		data |= EDP_CONFIGURATION_CTRL_ENHANCED_FRAMING;
452 
453 	depth = EDP_6BIT;
454 	if (ctrl->color_depth == 8)
455 		depth = EDP_8BIT;
456 
457 	data |= EDP_CONFIGURATION_CTRL_COLOR(depth);
458 
459 	if (!ctrl->interlaced)	/* progressive */
460 		data |= EDP_CONFIGURATION_CTRL_PROGRESSIVE;
461 
462 	data |= (EDP_CONFIGURATION_CTRL_SYNC_CLK |
463 		EDP_CONFIGURATION_CTRL_STATIC_MVID);
464 
465 	edp_write(ctrl->base + REG_EDP_CONFIGURATION_CTRL, data);
466 }
467 
edp_state_ctrl(struct edp_ctrl * ctrl,u32 state)468 static void edp_state_ctrl(struct edp_ctrl *ctrl, u32 state)
469 {
470 	edp_write(ctrl->base + REG_EDP_STATE_CTRL, state);
471 	/* Make sure H/W status is set */
472 	wmb();
473 }
474 
edp_lane_set_write(struct edp_ctrl * ctrl,u8 voltage_level,u8 pre_emphasis_level)475 static int edp_lane_set_write(struct edp_ctrl *ctrl,
476 	u8 voltage_level, u8 pre_emphasis_level)
477 {
478 	int i;
479 	u8 buf[4];
480 
481 	if (voltage_level >= DPCD_LINK_VOLTAGE_MAX)
482 		voltage_level |= 0x04;
483 
484 	if (pre_emphasis_level >= DPCD_LINK_PRE_EMPHASIS_MAX)
485 		pre_emphasis_level |= 0x04;
486 
487 	pre_emphasis_level <<= 3;
488 
489 	for (i = 0; i < 4; i++)
490 		buf[i] = voltage_level | pre_emphasis_level;
491 
492 	DBG("%s: p|v=0x%x", __func__, voltage_level | pre_emphasis_level);
493 	if (drm_dp_dpcd_write(ctrl->drm_aux, 0x103, buf, 4) < 4) {
494 		pr_err("%s: Set sw/pe to panel failed\n", __func__);
495 		return -ENOLINK;
496 	}
497 
498 	return 0;
499 }
500 
edp_train_pattern_set_write(struct edp_ctrl * ctrl,u8 pattern)501 static int edp_train_pattern_set_write(struct edp_ctrl *ctrl, u8 pattern)
502 {
503 	u8 p = pattern;
504 
505 	DBG("pattern=%x", p);
506 	if (drm_dp_dpcd_write(ctrl->drm_aux,
507 				DP_TRAINING_PATTERN_SET, &p, 1) < 1) {
508 		pr_err("%s: Set training pattern to panel failed\n", __func__);
509 		return -ENOLINK;
510 	}
511 
512 	return 0;
513 }
514 
edp_sink_train_set_adjust(struct edp_ctrl * ctrl,const u8 * link_status)515 static void edp_sink_train_set_adjust(struct edp_ctrl *ctrl,
516 	const u8 *link_status)
517 {
518 	int i;
519 	u8 max = 0;
520 	u8 data;
521 
522 	/* use the max level across lanes */
523 	for (i = 0; i < ctrl->lane_cnt; i++) {
524 		data = drm_dp_get_adjust_request_voltage(link_status, i);
525 		DBG("lane=%d req_voltage_swing=0x%x", i, data);
526 		if (max < data)
527 			max = data;
528 	}
529 
530 	ctrl->v_level = max >> DP_TRAIN_VOLTAGE_SWING_SHIFT;
531 
532 	/* use the max level across lanes */
533 	max = 0;
534 	for (i = 0; i < ctrl->lane_cnt; i++) {
535 		data = drm_dp_get_adjust_request_pre_emphasis(link_status, i);
536 		DBG("lane=%d req_pre_emphasis=0x%x", i, data);
537 		if (max < data)
538 			max = data;
539 	}
540 
541 	ctrl->p_level = max >> DP_TRAIN_PRE_EMPHASIS_SHIFT;
542 	DBG("v_level=%d, p_level=%d", ctrl->v_level, ctrl->p_level);
543 }
544 
edp_host_train_set(struct edp_ctrl * ctrl,u32 train)545 static void edp_host_train_set(struct edp_ctrl *ctrl, u32 train)
546 {
547 	int cnt = 10;
548 	u32 data;
549 	u32 shift = train - 1;
550 
551 	DBG("train=%d", train);
552 
553 	edp_state_ctrl(ctrl, EDP_STATE_CTRL_TRAIN_PATTERN_1 << shift);
554 	while (--cnt) {
555 		data = edp_read(ctrl->base + REG_EDP_MAINLINK_READY);
556 		if (data & (EDP_MAINLINK_READY_TRAIN_PATTERN_1_READY << shift))
557 			break;
558 	}
559 
560 	if (cnt == 0)
561 		pr_err("%s: set link_train=%d failed\n", __func__, train);
562 }
563 
564 static const u8 vm_pre_emphasis[4][4] = {
565 	{0x03, 0x06, 0x09, 0x0C},	/* pe0, 0 db */
566 	{0x03, 0x06, 0x09, 0xFF},	/* pe1, 3.5 db */
567 	{0x03, 0x06, 0xFF, 0xFF},	/* pe2, 6.0 db */
568 	{0x03, 0xFF, 0xFF, 0xFF}	/* pe3, 9.5 db */
569 };
570 
571 /* voltage swing, 0.2v and 1.0v are not support */
572 static const u8 vm_voltage_swing[4][4] = {
573 	{0x14, 0x18, 0x1A, 0x1E}, /* sw0, 0.4v  */
574 	{0x18, 0x1A, 0x1E, 0xFF}, /* sw1, 0.6 v */
575 	{0x1A, 0x1E, 0xFF, 0xFF}, /* sw1, 0.8 v */
576 	{0x1E, 0xFF, 0xFF, 0xFF}  /* sw1, 1.2 v, optional */
577 };
578 
edp_voltage_pre_emphasise_set(struct edp_ctrl * ctrl)579 static int edp_voltage_pre_emphasise_set(struct edp_ctrl *ctrl)
580 {
581 	u32 value0;
582 	u32 value1;
583 
584 	DBG("v=%d p=%d", ctrl->v_level, ctrl->p_level);
585 
586 	value0 = vm_pre_emphasis[(int)(ctrl->v_level)][(int)(ctrl->p_level)];
587 	value1 = vm_voltage_swing[(int)(ctrl->v_level)][(int)(ctrl->p_level)];
588 
589 	/* Configure host and panel only if both values are allowed */
590 	if (value0 != 0xFF && value1 != 0xFF) {
591 		msm_edp_phy_vm_pe_cfg(ctrl->phy, value0, value1);
592 		return edp_lane_set_write(ctrl, ctrl->v_level, ctrl->p_level);
593 	}
594 
595 	return -EINVAL;
596 }
597 
edp_start_link_train_1(struct edp_ctrl * ctrl)598 static int edp_start_link_train_1(struct edp_ctrl *ctrl)
599 {
600 	u8 link_status[DP_LINK_STATUS_SIZE];
601 	u8 old_v_level;
602 	int tries;
603 	int ret;
604 	int rlen;
605 
606 	DBG("");
607 
608 	edp_host_train_set(ctrl, DP_TRAINING_PATTERN_1);
609 	ret = edp_voltage_pre_emphasise_set(ctrl);
610 	if (ret)
611 		return ret;
612 	ret = edp_train_pattern_set_write(ctrl,
613 			DP_TRAINING_PATTERN_1 | DP_RECOVERED_CLOCK_OUT_EN);
614 	if (ret)
615 		return ret;
616 
617 	tries = 0;
618 	old_v_level = ctrl->v_level;
619 	while (1) {
620 		drm_dp_link_train_clock_recovery_delay(ctrl->dpcd);
621 
622 		rlen = drm_dp_dpcd_read_link_status(ctrl->drm_aux, link_status);
623 		if (rlen < DP_LINK_STATUS_SIZE) {
624 			pr_err("%s: read link status failed\n", __func__);
625 			return -ENOLINK;
626 		}
627 		if (drm_dp_clock_recovery_ok(link_status, ctrl->lane_cnt)) {
628 			ret = 0;
629 			break;
630 		}
631 
632 		if (ctrl->v_level == DPCD_LINK_VOLTAGE_MAX) {
633 			ret = -1;
634 			break;
635 		}
636 
637 		if (old_v_level == ctrl->v_level) {
638 			tries++;
639 			if (tries >= 5) {
640 				ret = -1;
641 				break;
642 			}
643 		} else {
644 			tries = 0;
645 			old_v_level = ctrl->v_level;
646 		}
647 
648 		edp_sink_train_set_adjust(ctrl, link_status);
649 		ret = edp_voltage_pre_emphasise_set(ctrl);
650 		if (ret)
651 			return ret;
652 	}
653 
654 	return ret;
655 }
656 
edp_start_link_train_2(struct edp_ctrl * ctrl)657 static int edp_start_link_train_2(struct edp_ctrl *ctrl)
658 {
659 	u8 link_status[DP_LINK_STATUS_SIZE];
660 	int tries = 0;
661 	int ret;
662 	int rlen;
663 
664 	DBG("");
665 
666 	edp_host_train_set(ctrl, DP_TRAINING_PATTERN_2);
667 	ret = edp_voltage_pre_emphasise_set(ctrl);
668 	if (ret)
669 		return ret;
670 
671 	ret = edp_train_pattern_set_write(ctrl,
672 			DP_TRAINING_PATTERN_2 | DP_RECOVERED_CLOCK_OUT_EN);
673 	if (ret)
674 		return ret;
675 
676 	while (1) {
677 		drm_dp_link_train_channel_eq_delay(ctrl->dpcd);
678 
679 		rlen = drm_dp_dpcd_read_link_status(ctrl->drm_aux, link_status);
680 		if (rlen < DP_LINK_STATUS_SIZE) {
681 			pr_err("%s: read link status failed\n", __func__);
682 			return -ENOLINK;
683 		}
684 		if (drm_dp_channel_eq_ok(link_status, ctrl->lane_cnt)) {
685 			ret = 0;
686 			break;
687 		}
688 
689 		tries++;
690 		if (tries > 10) {
691 			ret = -1;
692 			break;
693 		}
694 
695 		edp_sink_train_set_adjust(ctrl, link_status);
696 		ret = edp_voltage_pre_emphasise_set(ctrl);
697 		if (ret)
698 			return ret;
699 	}
700 
701 	return ret;
702 }
703 
edp_link_rate_down_shift(struct edp_ctrl * ctrl)704 static int edp_link_rate_down_shift(struct edp_ctrl *ctrl)
705 {
706 	u32 prate, lrate, bpp;
707 	u8 rate, lane, max_lane;
708 	int changed = 0;
709 
710 	rate = ctrl->link_rate;
711 	lane = ctrl->lane_cnt;
712 	max_lane = ctrl->dp_link.num_lanes;
713 
714 	bpp = ctrl->color_depth * 3;
715 	prate = ctrl->pixel_rate;
716 	prate *= bpp;
717 	prate /= 8; /* in kByte */
718 
719 	if (rate > DP_LINK_BW_1_62 && rate <= EDP_LINK_BW_MAX) {
720 		rate -= 4;	/* reduce rate */
721 		changed++;
722 	}
723 
724 	if (changed) {
725 		if (lane >= 1 && lane < max_lane)
726 			lane <<= 1;	/* increase lane */
727 
728 		lrate = 270000; /* in kHz */
729 		lrate *= rate;
730 		lrate /= 10; /* kByte, 10 bits --> 8 bits */
731 		lrate *= lane;
732 
733 		DBG("new lrate=%u prate=%u(kHz) rate=%d lane=%d p=%u b=%d",
734 			lrate, prate, rate, lane,
735 			ctrl->pixel_rate,
736 			bpp);
737 
738 		if (lrate > prate) {
739 			ctrl->link_rate = rate;
740 			ctrl->lane_cnt = lane;
741 			DBG("new rate=%d %d", rate, lane);
742 			return 0;
743 		}
744 	}
745 
746 	return -EINVAL;
747 }
748 
edp_clear_training_pattern(struct edp_ctrl * ctrl)749 static int edp_clear_training_pattern(struct edp_ctrl *ctrl)
750 {
751 	int ret;
752 
753 	ret = edp_train_pattern_set_write(ctrl, 0);
754 
755 	drm_dp_link_train_channel_eq_delay(ctrl->dpcd);
756 
757 	return ret;
758 }
759 
edp_do_link_train(struct edp_ctrl * ctrl)760 static int edp_do_link_train(struct edp_ctrl *ctrl)
761 {
762 	int ret;
763 	struct drm_dp_link dp_link;
764 
765 	DBG("");
766 	/*
767 	 * Set the current link rate and lane cnt to panel. They may have been
768 	 * adjusted and the values are different from them in DPCD CAP
769 	 */
770 	dp_link.num_lanes = ctrl->lane_cnt;
771 	dp_link.rate = drm_dp_bw_code_to_link_rate(ctrl->link_rate);
772 	dp_link.capabilities = ctrl->dp_link.capabilities;
773 	if (drm_dp_link_configure(ctrl->drm_aux, &dp_link) < 0)
774 		return EDP_TRAIN_FAIL;
775 
776 	ctrl->v_level = 0; /* start from default level */
777 	ctrl->p_level = 0;
778 
779 	edp_state_ctrl(ctrl, 0);
780 	if (edp_clear_training_pattern(ctrl))
781 		return EDP_TRAIN_FAIL;
782 
783 	ret = edp_start_link_train_1(ctrl);
784 	if (ret < 0) {
785 		if (edp_link_rate_down_shift(ctrl) == 0) {
786 			DBG("link reconfig");
787 			ret = EDP_TRAIN_RECONFIG;
788 			goto clear;
789 		} else {
790 			pr_err("%s: Training 1 failed", __func__);
791 			ret = EDP_TRAIN_FAIL;
792 			goto clear;
793 		}
794 	}
795 	DBG("Training 1 completed successfully");
796 
797 	edp_state_ctrl(ctrl, 0);
798 	if (edp_clear_training_pattern(ctrl))
799 		return EDP_TRAIN_FAIL;
800 
801 	ret = edp_start_link_train_2(ctrl);
802 	if (ret < 0) {
803 		if (edp_link_rate_down_shift(ctrl) == 0) {
804 			DBG("link reconfig");
805 			ret = EDP_TRAIN_RECONFIG;
806 			goto clear;
807 		} else {
808 			pr_err("%s: Training 2 failed", __func__);
809 			ret = EDP_TRAIN_FAIL;
810 			goto clear;
811 		}
812 	}
813 	DBG("Training 2 completed successfully");
814 
815 	edp_state_ctrl(ctrl, EDP_STATE_CTRL_SEND_VIDEO);
816 clear:
817 	edp_clear_training_pattern(ctrl);
818 
819 	return ret;
820 }
821 
edp_clock_synchrous(struct edp_ctrl * ctrl,int sync)822 static void edp_clock_synchrous(struct edp_ctrl *ctrl, int sync)
823 {
824 	u32 data;
825 	enum edp_color_depth depth;
826 
827 	data = edp_read(ctrl->base + REG_EDP_MISC1_MISC0);
828 
829 	if (sync)
830 		data |= EDP_MISC1_MISC0_SYNC;
831 	else
832 		data &= ~EDP_MISC1_MISC0_SYNC;
833 
834 	/* only legacy rgb mode supported */
835 	depth = EDP_6BIT; /* Default */
836 	if (ctrl->color_depth == 8)
837 		depth = EDP_8BIT;
838 	else if (ctrl->color_depth == 10)
839 		depth = EDP_10BIT;
840 	else if (ctrl->color_depth == 12)
841 		depth = EDP_12BIT;
842 	else if (ctrl->color_depth == 16)
843 		depth = EDP_16BIT;
844 
845 	data |= EDP_MISC1_MISC0_COLOR(depth);
846 
847 	edp_write(ctrl->base + REG_EDP_MISC1_MISC0, data);
848 }
849 
edp_sw_mvid_nvid(struct edp_ctrl * ctrl,u32 m,u32 n)850 static int edp_sw_mvid_nvid(struct edp_ctrl *ctrl, u32 m, u32 n)
851 {
852 	u32 n_multi, m_multi = 5;
853 
854 	if (ctrl->link_rate == DP_LINK_BW_1_62) {
855 		n_multi = 1;
856 	} else if (ctrl->link_rate == DP_LINK_BW_2_7) {
857 		n_multi = 2;
858 	} else {
859 		pr_err("%s: Invalid link rate, %d\n", __func__,
860 			ctrl->link_rate);
861 		return -EINVAL;
862 	}
863 
864 	edp_write(ctrl->base + REG_EDP_SOFTWARE_MVID, m * m_multi);
865 	edp_write(ctrl->base + REG_EDP_SOFTWARE_NVID, n * n_multi);
866 
867 	return 0;
868 }
869 
edp_mainlink_ctrl(struct edp_ctrl * ctrl,int enable)870 static void edp_mainlink_ctrl(struct edp_ctrl *ctrl, int enable)
871 {
872 	u32 data = 0;
873 
874 	edp_write(ctrl->base + REG_EDP_MAINLINK_CTRL, EDP_MAINLINK_CTRL_RESET);
875 	/* Make sure fully reset */
876 	wmb();
877 	usleep_range(500, 1000);
878 
879 	if (enable)
880 		data |= EDP_MAINLINK_CTRL_ENABLE;
881 
882 	edp_write(ctrl->base + REG_EDP_MAINLINK_CTRL, data);
883 }
884 
edp_ctrl_phy_aux_enable(struct edp_ctrl * ctrl,int enable)885 static void edp_ctrl_phy_aux_enable(struct edp_ctrl *ctrl, int enable)
886 {
887 	if (enable) {
888 		edp_regulator_enable(ctrl);
889 		edp_clk_enable(ctrl, EDP_CLK_MASK_AUX_CHAN);
890 		msm_edp_phy_ctrl(ctrl->phy, 1);
891 		msm_edp_aux_ctrl(ctrl->aux, 1);
892 		gpiod_set_value(ctrl->panel_en_gpio, 1);
893 	} else {
894 		gpiod_set_value(ctrl->panel_en_gpio, 0);
895 		msm_edp_aux_ctrl(ctrl->aux, 0);
896 		msm_edp_phy_ctrl(ctrl->phy, 0);
897 		edp_clk_disable(ctrl, EDP_CLK_MASK_AUX_CHAN);
898 		edp_regulator_disable(ctrl);
899 	}
900 }
901 
edp_ctrl_link_enable(struct edp_ctrl * ctrl,int enable)902 static void edp_ctrl_link_enable(struct edp_ctrl *ctrl, int enable)
903 {
904 	u32 m, n;
905 
906 	if (enable) {
907 		/* Enable link channel clocks */
908 		edp_clk_enable(ctrl, EDP_CLK_MASK_LINK_CHAN);
909 
910 		msm_edp_phy_lane_power_ctrl(ctrl->phy, true, ctrl->lane_cnt);
911 
912 		msm_edp_phy_vm_pe_init(ctrl->phy);
913 
914 		/* Make sure phy is programed */
915 		wmb();
916 		msm_edp_phy_ready(ctrl->phy);
917 
918 		edp_config_ctrl(ctrl);
919 		msm_edp_ctrl_pixel_clock_valid(ctrl, ctrl->pixel_rate, &m, &n);
920 		edp_sw_mvid_nvid(ctrl, m, n);
921 		edp_mainlink_ctrl(ctrl, 1);
922 	} else {
923 		edp_mainlink_ctrl(ctrl, 0);
924 
925 		msm_edp_phy_lane_power_ctrl(ctrl->phy, false, 0);
926 		edp_clk_disable(ctrl, EDP_CLK_MASK_LINK_CHAN);
927 	}
928 }
929 
edp_ctrl_training(struct edp_ctrl * ctrl)930 static int edp_ctrl_training(struct edp_ctrl *ctrl)
931 {
932 	int ret;
933 
934 	/* Do link training only when power is on */
935 	if (!ctrl->power_on)
936 		return -EINVAL;
937 
938 train_start:
939 	ret = edp_do_link_train(ctrl);
940 	if (ret == EDP_TRAIN_RECONFIG) {
941 		/* Re-configure main link */
942 		edp_ctrl_irq_enable(ctrl, 0);
943 		edp_ctrl_link_enable(ctrl, 0);
944 		msm_edp_phy_ctrl(ctrl->phy, 0);
945 
946 		/* Make sure link is fully disabled */
947 		wmb();
948 		usleep_range(500, 1000);
949 
950 		msm_edp_phy_ctrl(ctrl->phy, 1);
951 		edp_ctrl_link_enable(ctrl, 1);
952 		edp_ctrl_irq_enable(ctrl, 1);
953 		goto train_start;
954 	}
955 
956 	return ret;
957 }
958 
edp_ctrl_on_worker(struct work_struct * work)959 static void edp_ctrl_on_worker(struct work_struct *work)
960 {
961 	struct edp_ctrl *ctrl = container_of(
962 				work, struct edp_ctrl, on_work);
963 	int ret;
964 
965 	mutex_lock(&ctrl->dev_mutex);
966 
967 	if (ctrl->power_on) {
968 		DBG("already on");
969 		goto unlock_ret;
970 	}
971 
972 	edp_ctrl_phy_aux_enable(ctrl, 1);
973 	edp_ctrl_link_enable(ctrl, 1);
974 
975 	edp_ctrl_irq_enable(ctrl, 1);
976 	ret = drm_dp_link_power_up(ctrl->drm_aux, &ctrl->dp_link);
977 	if (ret)
978 		goto fail;
979 
980 	ctrl->power_on = true;
981 
982 	/* Start link training */
983 	ret = edp_ctrl_training(ctrl);
984 	if (ret != EDP_TRAIN_SUCCESS)
985 		goto fail;
986 
987 	DBG("DONE");
988 	goto unlock_ret;
989 
990 fail:
991 	edp_ctrl_irq_enable(ctrl, 0);
992 	edp_ctrl_link_enable(ctrl, 0);
993 	edp_ctrl_phy_aux_enable(ctrl, 0);
994 	ctrl->power_on = false;
995 unlock_ret:
996 	mutex_unlock(&ctrl->dev_mutex);
997 }
998 
edp_ctrl_off_worker(struct work_struct * work)999 static void edp_ctrl_off_worker(struct work_struct *work)
1000 {
1001 	struct edp_ctrl *ctrl = container_of(
1002 				work, struct edp_ctrl, off_work);
1003 	unsigned long time_left;
1004 
1005 	mutex_lock(&ctrl->dev_mutex);
1006 
1007 	if (!ctrl->power_on) {
1008 		DBG("already off");
1009 		goto unlock_ret;
1010 	}
1011 
1012 	reinit_completion(&ctrl->idle_comp);
1013 	edp_state_ctrl(ctrl, EDP_STATE_CTRL_PUSH_IDLE);
1014 
1015 	time_left = wait_for_completion_timeout(&ctrl->idle_comp,
1016 						msecs_to_jiffies(500));
1017 	if (!time_left)
1018 		DBG("%s: idle pattern timedout\n", __func__);
1019 
1020 	edp_state_ctrl(ctrl, 0);
1021 
1022 	drm_dp_link_power_down(ctrl->drm_aux, &ctrl->dp_link);
1023 
1024 	edp_ctrl_irq_enable(ctrl, 0);
1025 
1026 	edp_ctrl_link_enable(ctrl, 0);
1027 
1028 	edp_ctrl_phy_aux_enable(ctrl, 0);
1029 
1030 	ctrl->power_on = false;
1031 
1032 unlock_ret:
1033 	mutex_unlock(&ctrl->dev_mutex);
1034 }
1035 
msm_edp_ctrl_irq(struct edp_ctrl * ctrl)1036 irqreturn_t msm_edp_ctrl_irq(struct edp_ctrl *ctrl)
1037 {
1038 	u32 isr1, isr2, mask1, mask2;
1039 	u32 ack;
1040 
1041 	DBG("");
1042 	spin_lock(&ctrl->irq_lock);
1043 	isr1 = edp_read(ctrl->base + REG_EDP_INTERRUPT_REG_1);
1044 	isr2 = edp_read(ctrl->base + REG_EDP_INTERRUPT_REG_2);
1045 
1046 	mask1 = isr1 & EDP_INTR_MASK1;
1047 	mask2 = isr2 & EDP_INTR_MASK2;
1048 
1049 	isr1 &= ~mask1;	/* remove masks bit */
1050 	isr2 &= ~mask2;
1051 
1052 	DBG("isr=%x mask=%x isr2=%x mask2=%x",
1053 			isr1, mask1, isr2, mask2);
1054 
1055 	ack = isr1 & EDP_INTR_STATUS1;
1056 	ack <<= 1;	/* ack bits */
1057 	ack |= mask1;
1058 	edp_write(ctrl->base + REG_EDP_INTERRUPT_REG_1, ack);
1059 
1060 	ack = isr2 & EDP_INTR_STATUS2;
1061 	ack <<= 1;	/* ack bits */
1062 	ack |= mask2;
1063 	edp_write(ctrl->base + REG_EDP_INTERRUPT_REG_2, ack);
1064 	spin_unlock(&ctrl->irq_lock);
1065 
1066 	if (isr1 & EDP_INTERRUPT_REG_1_HPD)
1067 		DBG("edp_hpd");
1068 
1069 	if (isr2 & EDP_INTERRUPT_REG_2_READY_FOR_VIDEO)
1070 		DBG("edp_video_ready");
1071 
1072 	if (isr2 & EDP_INTERRUPT_REG_2_IDLE_PATTERNs_SENT) {
1073 		DBG("idle_patterns_sent");
1074 		complete(&ctrl->idle_comp);
1075 	}
1076 
1077 	msm_edp_aux_irq(ctrl->aux, isr1);
1078 
1079 	return IRQ_HANDLED;
1080 }
1081 
msm_edp_ctrl_power(struct edp_ctrl * ctrl,bool on)1082 void msm_edp_ctrl_power(struct edp_ctrl *ctrl, bool on)
1083 {
1084 	if (on)
1085 		queue_work(ctrl->workqueue, &ctrl->on_work);
1086 	else
1087 		queue_work(ctrl->workqueue, &ctrl->off_work);
1088 }
1089 
msm_edp_ctrl_init(struct msm_edp * edp)1090 int msm_edp_ctrl_init(struct msm_edp *edp)
1091 {
1092 	struct edp_ctrl *ctrl = NULL;
1093 	struct device *dev = &edp->pdev->dev;
1094 	int ret;
1095 
1096 	if (!edp) {
1097 		pr_err("%s: edp is NULL!\n", __func__);
1098 		return -EINVAL;
1099 	}
1100 
1101 	ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
1102 	if (!ctrl)
1103 		return -ENOMEM;
1104 
1105 	edp->ctrl = ctrl;
1106 	ctrl->pdev = edp->pdev;
1107 
1108 	ctrl->base = msm_ioremap(ctrl->pdev, "edp", "eDP");
1109 	if (IS_ERR(ctrl->base))
1110 		return PTR_ERR(ctrl->base);
1111 
1112 	/* Get regulator, clock, gpio, pwm */
1113 	ret = edp_regulator_init(ctrl);
1114 	if (ret) {
1115 		pr_err("%s:regulator init fail\n", __func__);
1116 		return ret;
1117 	}
1118 	ret = edp_clk_init(ctrl);
1119 	if (ret) {
1120 		pr_err("%s:clk init fail\n", __func__);
1121 		return ret;
1122 	}
1123 	ret = edp_gpio_config(ctrl);
1124 	if (ret) {
1125 		pr_err("%s:failed to configure GPIOs: %d", __func__, ret);
1126 		return ret;
1127 	}
1128 
1129 	/* Init aux and phy */
1130 	ctrl->aux = msm_edp_aux_init(dev, ctrl->base, &ctrl->drm_aux);
1131 	if (!ctrl->aux || !ctrl->drm_aux) {
1132 		pr_err("%s:failed to init aux\n", __func__);
1133 		return -ENOMEM;
1134 	}
1135 
1136 	ctrl->phy = msm_edp_phy_init(dev, ctrl->base);
1137 	if (!ctrl->phy) {
1138 		pr_err("%s:failed to init phy\n", __func__);
1139 		ret = -ENOMEM;
1140 		goto err_destory_aux;
1141 	}
1142 
1143 	spin_lock_init(&ctrl->irq_lock);
1144 	mutex_init(&ctrl->dev_mutex);
1145 	init_completion(&ctrl->idle_comp);
1146 
1147 	/* setup workqueue */
1148 	ctrl->workqueue = alloc_ordered_workqueue("edp_drm_work", 0);
1149 	INIT_WORK(&ctrl->on_work, edp_ctrl_on_worker);
1150 	INIT_WORK(&ctrl->off_work, edp_ctrl_off_worker);
1151 
1152 	return 0;
1153 
1154 err_destory_aux:
1155 	msm_edp_aux_destroy(dev, ctrl->aux);
1156 	ctrl->aux = NULL;
1157 	return ret;
1158 }
1159 
msm_edp_ctrl_destroy(struct edp_ctrl * ctrl)1160 void msm_edp_ctrl_destroy(struct edp_ctrl *ctrl)
1161 {
1162 	if (!ctrl)
1163 		return;
1164 
1165 	if (ctrl->workqueue) {
1166 		flush_workqueue(ctrl->workqueue);
1167 		destroy_workqueue(ctrl->workqueue);
1168 		ctrl->workqueue = NULL;
1169 	}
1170 
1171 	if (ctrl->aux) {
1172 		msm_edp_aux_destroy(&ctrl->pdev->dev, ctrl->aux);
1173 		ctrl->aux = NULL;
1174 	}
1175 
1176 	kfree(ctrl->edid);
1177 	ctrl->edid = NULL;
1178 
1179 	mutex_destroy(&ctrl->dev_mutex);
1180 }
1181 
msm_edp_ctrl_panel_connected(struct edp_ctrl * ctrl)1182 bool msm_edp_ctrl_panel_connected(struct edp_ctrl *ctrl)
1183 {
1184 	mutex_lock(&ctrl->dev_mutex);
1185 	DBG("connect status = %d", ctrl->edp_connected);
1186 	if (ctrl->edp_connected) {
1187 		mutex_unlock(&ctrl->dev_mutex);
1188 		return true;
1189 	}
1190 
1191 	if (!ctrl->power_on) {
1192 		edp_ctrl_phy_aux_enable(ctrl, 1);
1193 		edp_ctrl_irq_enable(ctrl, 1);
1194 	}
1195 
1196 	if (drm_dp_dpcd_read(ctrl->drm_aux, DP_DPCD_REV, ctrl->dpcd,
1197 				DP_RECEIVER_CAP_SIZE) < DP_RECEIVER_CAP_SIZE) {
1198 		pr_err("%s: AUX channel is NOT ready\n", __func__);
1199 		memset(ctrl->dpcd, 0, DP_RECEIVER_CAP_SIZE);
1200 	} else {
1201 		ctrl->edp_connected = true;
1202 	}
1203 
1204 	if (!ctrl->power_on) {
1205 		edp_ctrl_irq_enable(ctrl, 0);
1206 		edp_ctrl_phy_aux_enable(ctrl, 0);
1207 	}
1208 
1209 	DBG("exit: connect status=%d", ctrl->edp_connected);
1210 
1211 	mutex_unlock(&ctrl->dev_mutex);
1212 
1213 	return ctrl->edp_connected;
1214 }
1215 
msm_edp_ctrl_get_panel_info(struct edp_ctrl * ctrl,struct drm_connector * connector,struct edid ** edid)1216 int msm_edp_ctrl_get_panel_info(struct edp_ctrl *ctrl,
1217 		struct drm_connector *connector, struct edid **edid)
1218 {
1219 	int ret = 0;
1220 
1221 	mutex_lock(&ctrl->dev_mutex);
1222 
1223 	if (ctrl->edid) {
1224 		if (edid) {
1225 			DBG("Just return edid buffer");
1226 			*edid = ctrl->edid;
1227 		}
1228 		goto unlock_ret;
1229 	}
1230 
1231 	if (!ctrl->power_on) {
1232 		edp_ctrl_phy_aux_enable(ctrl, 1);
1233 		edp_ctrl_irq_enable(ctrl, 1);
1234 	}
1235 
1236 	ret = drm_dp_link_probe(ctrl->drm_aux, &ctrl->dp_link);
1237 	if (ret) {
1238 		pr_err("%s: read dpcd cap failed, %d\n", __func__, ret);
1239 		goto disable_ret;
1240 	}
1241 
1242 	/* Initialize link rate as panel max link rate */
1243 	ctrl->link_rate = drm_dp_link_rate_to_bw_code(ctrl->dp_link.rate);
1244 
1245 	ctrl->edid = drm_get_edid(connector, &ctrl->drm_aux->ddc);
1246 	if (!ctrl->edid) {
1247 		pr_err("%s: edid read fail\n", __func__);
1248 		goto disable_ret;
1249 	}
1250 
1251 	if (edid)
1252 		*edid = ctrl->edid;
1253 
1254 disable_ret:
1255 	if (!ctrl->power_on) {
1256 		edp_ctrl_irq_enable(ctrl, 0);
1257 		edp_ctrl_phy_aux_enable(ctrl, 0);
1258 	}
1259 unlock_ret:
1260 	mutex_unlock(&ctrl->dev_mutex);
1261 	return ret;
1262 }
1263 
msm_edp_ctrl_timing_cfg(struct edp_ctrl * ctrl,const struct drm_display_mode * mode,const struct drm_display_info * info)1264 int msm_edp_ctrl_timing_cfg(struct edp_ctrl *ctrl,
1265 				const struct drm_display_mode *mode,
1266 				const struct drm_display_info *info)
1267 {
1268 	u32 hstart_from_sync, vstart_from_sync;
1269 	u32 data;
1270 	int ret = 0;
1271 
1272 	mutex_lock(&ctrl->dev_mutex);
1273 	/*
1274 	 * Need to keep color depth, pixel rate and
1275 	 * interlaced information in ctrl context
1276 	 */
1277 	ctrl->color_depth = info->bpc;
1278 	ctrl->pixel_rate = mode->clock;
1279 	ctrl->interlaced = !!(mode->flags & DRM_MODE_FLAG_INTERLACE);
1280 
1281 	/* Fill initial link config based on passed in timing */
1282 	edp_fill_link_cfg(ctrl);
1283 
1284 	if (edp_clk_enable(ctrl, EDP_CLK_MASK_AHB)) {
1285 		pr_err("%s, fail to prepare enable ahb clk\n", __func__);
1286 		ret = -EINVAL;
1287 		goto unlock_ret;
1288 	}
1289 	edp_clock_synchrous(ctrl, 1);
1290 
1291 	/* Configure eDP timing to HW */
1292 	edp_write(ctrl->base + REG_EDP_TOTAL_HOR_VER,
1293 		EDP_TOTAL_HOR_VER_HORIZ(mode->htotal) |
1294 		EDP_TOTAL_HOR_VER_VERT(mode->vtotal));
1295 
1296 	vstart_from_sync = mode->vtotal - mode->vsync_start;
1297 	hstart_from_sync = mode->htotal - mode->hsync_start;
1298 	edp_write(ctrl->base + REG_EDP_START_HOR_VER_FROM_SYNC,
1299 		EDP_START_HOR_VER_FROM_SYNC_HORIZ(hstart_from_sync) |
1300 		EDP_START_HOR_VER_FROM_SYNC_VERT(vstart_from_sync));
1301 
1302 	data = EDP_HSYNC_VSYNC_WIDTH_POLARITY_VERT(
1303 			mode->vsync_end - mode->vsync_start);
1304 	data |= EDP_HSYNC_VSYNC_WIDTH_POLARITY_HORIZ(
1305 			mode->hsync_end - mode->hsync_start);
1306 	if (mode->flags & DRM_MODE_FLAG_NVSYNC)
1307 		data |= EDP_HSYNC_VSYNC_WIDTH_POLARITY_NVSYNC;
1308 	if (mode->flags & DRM_MODE_FLAG_NHSYNC)
1309 		data |= EDP_HSYNC_VSYNC_WIDTH_POLARITY_NHSYNC;
1310 	edp_write(ctrl->base + REG_EDP_HSYNC_VSYNC_WIDTH_POLARITY, data);
1311 
1312 	edp_write(ctrl->base + REG_EDP_ACTIVE_HOR_VER,
1313 		EDP_ACTIVE_HOR_VER_HORIZ(mode->hdisplay) |
1314 		EDP_ACTIVE_HOR_VER_VERT(mode->vdisplay));
1315 
1316 	edp_clk_disable(ctrl, EDP_CLK_MASK_AHB);
1317 
1318 unlock_ret:
1319 	mutex_unlock(&ctrl->dev_mutex);
1320 	return ret;
1321 }
1322 
msm_edp_ctrl_pixel_clock_valid(struct edp_ctrl * ctrl,u32 pixel_rate,u32 * pm,u32 * pn)1323 bool msm_edp_ctrl_pixel_clock_valid(struct edp_ctrl *ctrl,
1324 	u32 pixel_rate, u32 *pm, u32 *pn)
1325 {
1326 	const struct edp_pixel_clk_div *divs;
1327 	u32 err = 1; /* 1% error tolerance */
1328 	u32 clk_err;
1329 	int i;
1330 
1331 	if (ctrl->link_rate == DP_LINK_BW_1_62) {
1332 		divs = clk_divs[0];
1333 	} else if (ctrl->link_rate == DP_LINK_BW_2_7) {
1334 		divs = clk_divs[1];
1335 	} else {
1336 		pr_err("%s: Invalid link rate,%d\n", __func__, ctrl->link_rate);
1337 		return false;
1338 	}
1339 
1340 	for (i = 0; i < EDP_PIXEL_CLK_NUM; i++) {
1341 		clk_err = abs(divs[i].rate - pixel_rate);
1342 		if ((divs[i].rate * err / 100) >= clk_err) {
1343 			if (pm)
1344 				*pm = divs[i].m;
1345 			if (pn)
1346 				*pn = divs[i].n;
1347 			return true;
1348 		}
1349 	}
1350 
1351 	DBG("pixel clock %d(kHz) not supported", pixel_rate);
1352 
1353 	return false;
1354 }
1355 
1356