1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3  * This header file contains global constant/enum definitions,
4  * global variable declaration.
5  */
6 #ifndef _LBS_DEFS_H_
7 #define _LBS_DEFS_H_
8 
9 #include <linux/spinlock.h>
10 
11 #ifdef CONFIG_LIBERTAS_DEBUG
12 #define DEBUG
13 #define PROC_DEBUG
14 #endif
15 
16 #ifndef DRV_NAME
17 #define DRV_NAME "libertas"
18 #endif
19 
20 
21 #define LBS_DEB_ENTER	0x00000001
22 #define LBS_DEB_LEAVE	0x00000002
23 #define LBS_DEB_MAIN	0x00000004
24 #define LBS_DEB_NET	0x00000008
25 #define LBS_DEB_MESH	0x00000010
26 #define LBS_DEB_WEXT	0x00000020
27 #define LBS_DEB_IOCTL	0x00000040
28 #define LBS_DEB_SCAN	0x00000080
29 #define LBS_DEB_ASSOC	0x00000100
30 #define LBS_DEB_JOIN	0x00000200
31 #define LBS_DEB_11D	0x00000400
32 #define LBS_DEB_DEBUGFS	0x00000800
33 #define LBS_DEB_ETHTOOL	0x00001000
34 #define LBS_DEB_HOST	0x00002000
35 #define LBS_DEB_CMD	0x00004000
36 #define LBS_DEB_RX	0x00008000
37 #define LBS_DEB_TX	0x00010000
38 #define LBS_DEB_USB	0x00020000
39 #define LBS_DEB_CS	0x00040000
40 #define LBS_DEB_FW	0x00080000
41 #define LBS_DEB_THREAD	0x00100000
42 #define LBS_DEB_HEX	0x00200000
43 #define LBS_DEB_SDIO	0x00400000
44 #define LBS_DEB_SYSFS	0x00800000
45 #define LBS_DEB_SPI	0x01000000
46 #define LBS_DEB_CFG80211 0x02000000
47 
48 extern unsigned int lbs_debug;
49 
50 #ifdef DEBUG
51 #define LBS_DEB_LL(grp, grpnam, fmt, args...) \
52 do { if ((lbs_debug & (grp)) == (grp)) \
53   printk(KERN_DEBUG DRV_NAME grpnam "%s: " fmt, \
54          in_interrupt() ? " (INT)" : "", ## args); } while (0)
55 #else
56 #define LBS_DEB_LL(grp, grpnam, fmt, args...) do {} while (0)
57 #endif
58 
59 #define lbs_deb_main(fmt, args...)      LBS_DEB_LL(LBS_DEB_MAIN, " main", fmt, ##args)
60 #define lbs_deb_net(fmt, args...)       LBS_DEB_LL(LBS_DEB_NET, " net", fmt, ##args)
61 #define lbs_deb_mesh(fmt, args...)      LBS_DEB_LL(LBS_DEB_MESH, " mesh", fmt, ##args)
62 #define lbs_deb_wext(fmt, args...)      LBS_DEB_LL(LBS_DEB_WEXT, " wext", fmt, ##args)
63 #define lbs_deb_ioctl(fmt, args...)     LBS_DEB_LL(LBS_DEB_IOCTL, " ioctl", fmt, ##args)
64 #define lbs_deb_scan(fmt, args...)      LBS_DEB_LL(LBS_DEB_SCAN, " scan", fmt, ##args)
65 #define lbs_deb_assoc(fmt, args...)     LBS_DEB_LL(LBS_DEB_ASSOC, " assoc", fmt, ##args)
66 #define lbs_deb_join(fmt, args...)      LBS_DEB_LL(LBS_DEB_JOIN, " join", fmt, ##args)
67 #define lbs_deb_11d(fmt, args...)       LBS_DEB_LL(LBS_DEB_11D, " 11d", fmt, ##args)
68 #define lbs_deb_debugfs(fmt, args...)   LBS_DEB_LL(LBS_DEB_DEBUGFS, " debugfs", fmt, ##args)
69 #define lbs_deb_ethtool(fmt, args...)   LBS_DEB_LL(LBS_DEB_ETHTOOL, " ethtool", fmt, ##args)
70 #define lbs_deb_host(fmt, args...)      LBS_DEB_LL(LBS_DEB_HOST, " host", fmt, ##args)
71 #define lbs_deb_cmd(fmt, args...)       LBS_DEB_LL(LBS_DEB_CMD, " cmd", fmt, ##args)
72 #define lbs_deb_rx(fmt, args...)        LBS_DEB_LL(LBS_DEB_RX, " rx", fmt, ##args)
73 #define lbs_deb_tx(fmt, args...)        LBS_DEB_LL(LBS_DEB_TX, " tx", fmt, ##args)
74 #define lbs_deb_fw(fmt, args...)        LBS_DEB_LL(LBS_DEB_FW, " fw", fmt, ##args)
75 #define lbs_deb_usb(fmt, args...)       LBS_DEB_LL(LBS_DEB_USB, " usb", fmt, ##args)
76 #define lbs_deb_usbd(dev, fmt, args...) LBS_DEB_LL(LBS_DEB_USB, " usbd", "%s:" fmt, dev_name(dev), ##args)
77 #define lbs_deb_cs(fmt, args...)        LBS_DEB_LL(LBS_DEB_CS, " cs", fmt, ##args)
78 #define lbs_deb_thread(fmt, args...)    LBS_DEB_LL(LBS_DEB_THREAD, " thread", fmt, ##args)
79 #define lbs_deb_sdio(fmt, args...)      LBS_DEB_LL(LBS_DEB_SDIO, " sdio", fmt, ##args)
80 #define lbs_deb_sysfs(fmt, args...)     LBS_DEB_LL(LBS_DEB_SYSFS, " sysfs", fmt, ##args)
81 #define lbs_deb_spi(fmt, args...)       LBS_DEB_LL(LBS_DEB_SPI, " spi", fmt, ##args)
82 #define lbs_deb_cfg80211(fmt, args...)  LBS_DEB_LL(LBS_DEB_CFG80211, " cfg80211", fmt, ##args)
83 
84 #ifdef DEBUG
lbs_deb_hex(unsigned int grp,const char * prompt,const u8 * buf,int len)85 static inline void lbs_deb_hex(unsigned int grp, const char *prompt,
86 			       const u8 *buf, int len)
87 {
88 	int i = 0;
89 
90 	if (len &&
91 	    (lbs_debug & LBS_DEB_HEX) &&
92 	    (lbs_debug & grp))
93 	{
94 		for (i = 1; i <= len; i++) {
95 			if ((i & 0xf) == 1) {
96 				if (i != 1)
97 					printk("\n");
98 				printk(DRV_NAME " %s: ", prompt);
99 			}
100 			printk("%02x ", (u8) * buf);
101 			buf++;
102 		}
103 		printk("\n");
104 	}
105 }
106 #else
107 #define lbs_deb_hex(grp,prompt,buf,len)	do {} while (0)
108 #endif
109 
110 
111 
112 /* Buffer Constants */
113 
114 /*	The size of SQ memory PPA, DPA are 8 DWORDs, that keep the physical
115  *	addresses of TxPD buffers. Station has only 8 TxPD available, Whereas
116  *	driver has more local TxPDs. Each TxPD on the host memory is associated
117  *	with a Tx control node. The driver maintains 8 RxPD descriptors for
118  *	station firmware to store Rx packet information.
119  *
120  *	Current version of MAC has a 32x6 multicast address buffer.
121  *
122  *	802.11b can have up to  14 channels, the driver keeps the
123  *	BSSID(MAC address) of each APs or Ad hoc stations it has sensed.
124  */
125 
126 #define MRVDRV_MAX_MULTICAST_LIST_SIZE	32
127 #define LBS_NUM_CMD_BUFFERS             10
128 #define LBS_CMD_BUFFER_SIZE             (2 * 1024)
129 #define MRVDRV_MAX_CHANNEL_SIZE		14
130 #define MRVDRV_ASSOCIATION_TIME_OUT	255
131 #define MRVDRV_SNAP_HEADER_LEN          8
132 
133 #define	LBS_UPLD_SIZE			2312
134 #define DEV_NAME_LEN			32
135 
136 /* Wake criteria for HOST_SLEEP_CFG command */
137 #define EHS_WAKE_ON_BROADCAST_DATA	0x0001
138 #define EHS_WAKE_ON_UNICAST_DATA	0x0002
139 #define EHS_WAKE_ON_MAC_EVENT		0x0004
140 #define EHS_WAKE_ON_MULTICAST_DATA	0x0008
141 #define EHS_REMOVE_WAKEUP		0xFFFFFFFF
142 /* Wake rules for Host_Sleep_CFG command */
143 #define WOL_RULE_NET_TYPE_INFRA_OR_IBSS	0x00
144 #define WOL_RULE_NET_TYPE_MESH		0x10
145 #define WOL_RULE_ADDR_TYPE_BCAST	0x01
146 #define WOL_RULE_ADDR_TYPE_MCAST	0x08
147 #define WOL_RULE_ADDR_TYPE_UCAST	0x02
148 #define WOL_RULE_OP_AND			0x01
149 #define WOL_RULE_OP_OR			0x02
150 #define WOL_RULE_OP_INVALID		0xFF
151 #define WOL_RESULT_VALID_CMD		0
152 #define WOL_RESULT_NOSPC_ERR		1
153 #define WOL_RESULT_EEXIST_ERR		2
154 
155 /* Misc constants */
156 /* This section defines 802.11 specific contants */
157 
158 #define MRVDRV_MAX_BSS_DESCRIPTS		16
159 #define MRVDRV_MAX_REGION_CODE			6
160 
161 #define MRVDRV_DEFAULT_LISTEN_INTERVAL		10
162 
163 #define	MRVDRV_CHANNELS_PER_SCAN		4
164 #define	MRVDRV_MAX_CHANNELS_PER_SCAN		14
165 
166 #define MRVDRV_MIN_BEACON_INTERVAL		20
167 #define MRVDRV_MAX_BEACON_INTERVAL		1000
168 #define MRVDRV_BEACON_INTERVAL			100
169 
170 #define MARVELL_MESH_IE_LENGTH		9
171 
172 /*
173  * Values used to populate the struct mrvl_mesh_ie.  The only time you need this
174  * is when enabling the mesh using CMD_MESH_CONFIG.
175  */
176 #define MARVELL_MESH_IE_TYPE		4
177 #define MARVELL_MESH_IE_SUBTYPE		0
178 #define MARVELL_MESH_IE_VERSION		0
179 #define MARVELL_MESH_PROTO_ID_HWMP	0
180 #define MARVELL_MESH_METRIC_ID		0
181 #define MARVELL_MESH_CAPABILITY		0
182 
183 /* INT status Bit Definition */
184 #define MRVDRV_TX_DNLD_RDY		0x0001
185 #define MRVDRV_RX_UPLD_RDY		0x0002
186 #define MRVDRV_CMD_DNLD_RDY		0x0004
187 #define MRVDRV_CMD_UPLD_RDY		0x0008
188 #define MRVDRV_CARDEVENT		0x0010
189 
190 /* Automatic TX control default levels */
191 #define POW_ADAPT_DEFAULT_P0 13
192 #define POW_ADAPT_DEFAULT_P1 15
193 #define POW_ADAPT_DEFAULT_P2 18
194 #define TPC_DEFAULT_P0 5
195 #define TPC_DEFAULT_P1 10
196 #define TPC_DEFAULT_P2 13
197 
198 /* TxPD status */
199 
200 /*
201  *	Station firmware use TxPD status field to report final Tx transmit
202  *	result, Bit masks are used to present combined situations.
203  */
204 
205 #define MRVDRV_TxPD_POWER_MGMT_NULL_PACKET 0x01
206 #define MRVDRV_TxPD_POWER_MGMT_LAST_PACKET 0x08
207 
208 /* Tx mesh flag */
209 /*
210  * Currently we are using normal WDS flag as mesh flag.
211  * TODO: change to proper mesh flag when MAC understands it.
212  */
213 #define TxPD_CONTROL_WDS_FRAME (1<<17)
214 #define TxPD_MESH_FRAME TxPD_CONTROL_WDS_FRAME
215 
216 /* Mesh interface ID */
217 #define MESH_IFACE_ID					0x0001
218 /* Mesh id should be in bits 14-13-12 */
219 #define MESH_IFACE_BIT_OFFSET				0x000c
220 /* Mesh enable bit in FW capability */
221 #define MESH_CAPINFO_ENABLE_MASK			(1<<16)
222 
223 /* FW definition from Marvell v4 */
224 #define MRVL_FW_V4					(0x04)
225 /* FW definition from Marvell v5 */
226 #define MRVL_FW_V5					(0x05)
227 /* FW definition from Marvell v10 */
228 #define MRVL_FW_V10					(0x0a)
229 /* FW major revision definition */
230 #define MRVL_FW_MAJOR_REV(x)				((x)>>24)
231 
232 /* RxPD status */
233 
234 #define MRVDRV_RXPD_STATUS_OK                0x0001
235 
236 /* RxPD status - Received packet types */
237 /* Rx mesh flag */
238 /*
239  * Currently we are using normal WDS flag as mesh flag.
240  * TODO: change to proper mesh flag when MAC understands it.
241  */
242 #define RxPD_CONTROL_WDS_FRAME (0x40)
243 #define RxPD_MESH_FRAME RxPD_CONTROL_WDS_FRAME
244 
245 /* RSSI-related defines */
246 /*
247  *	RSSI constants are used to implement 802.11 RSSI threshold
248  *	indication. if the Rx packet signal got too weak for 5 consecutive
249  *	times, miniport driver (driver) will report this event to wrapper
250  */
251 
252 #define MRVDRV_NF_DEFAULT_SCAN_VALUE		(-96)
253 
254 /* RTS/FRAG related defines */
255 #define MRVDRV_RTS_MIN_VALUE		0
256 #define MRVDRV_RTS_MAX_VALUE		2347
257 #define MRVDRV_FRAG_MIN_VALUE		256
258 #define MRVDRV_FRAG_MAX_VALUE		2346
259 
260 /* This is for firmware specific length */
261 #define EXTRA_LEN	36
262 
263 #define MRVDRV_ETH_TX_PACKET_BUFFER_SIZE \
264 	(ETH_FRAME_LEN + sizeof(struct txpd) + EXTRA_LEN)
265 
266 #define MRVDRV_ETH_RX_PACKET_BUFFER_SIZE \
267 	(ETH_FRAME_LEN + sizeof(struct rxpd) \
268 	 + MRVDRV_SNAP_HEADER_LEN + EXTRA_LEN)
269 
270 #define	CMD_F_HOSTCMD		(1 << 0)
271 #define FW_CAPINFO_WPA  	(1 << 0)
272 #define FW_CAPINFO_PS  		(1 << 1)
273 #define FW_CAPINFO_FIRMWARE_UPGRADE	(1 << 13)
274 #define FW_CAPINFO_BOOT2_UPGRADE	(1<<14)
275 #define FW_CAPINFO_PERSISTENT_CONFIG	(1<<15)
276 
277 #define KEY_LEN_WPA_AES			16
278 #define KEY_LEN_WPA_TKIP		32
279 #define KEY_LEN_WEP_104			13
280 #define KEY_LEN_WEP_40			5
281 
282 #define RF_ANTENNA_1		0x1
283 #define RF_ANTENNA_2		0x2
284 #define RF_ANTENNA_AUTO		0xFFFF
285 
286 #define	BAND_B			(0x01)
287 #define	BAND_G			(0x02)
288 #define ALL_802_11_BANDS	(BAND_B | BAND_G)
289 
290 #define MAX_RATES			14
291 
292 #define	MAX_LEDS			8
293 
294 /* Global Variable Declaration */
295 extern const char lbs_driver_version[];
296 extern u16 lbs_region_code_to_index[MRVDRV_MAX_REGION_CODE];
297 
298 
299 /* ENUM definition */
300 /* SNRNF_TYPE */
301 enum SNRNF_TYPE {
302 	TYPE_BEACON = 0,
303 	TYPE_RXPD,
304 	MAX_TYPE_B
305 };
306 
307 /* SNRNF_DATA */
308 enum SNRNF_DATA {
309 	TYPE_NOAVG = 0,
310 	TYPE_AVG,
311 	MAX_TYPE_AVG
312 };
313 
314 /* LBS_802_11_POWER_MODE */
315 enum LBS_802_11_POWER_MODE {
316 	LBS802_11POWERMODECAM,
317 	LBS802_11POWERMODEMAX_PSP,
318 	LBS802_11POWERMODEFAST_PSP,
319 	/* not a real mode, defined as an upper bound */
320 	LBS802_11POWEMODEMAX
321 };
322 
323 /* PS_STATE */
324 enum PS_STATE {
325 	PS_STATE_FULL_POWER,
326 	PS_STATE_AWAKE,
327 	PS_STATE_PRE_SLEEP,
328 	PS_STATE_SLEEP
329 };
330 
331 /* DNLD_STATE */
332 enum DNLD_STATE {
333 	DNLD_RES_RECEIVED,
334 	DNLD_DATA_SENT,
335 	DNLD_CMD_SENT,
336 	DNLD_BOOTCMD_SENT,
337 };
338 
339 /* LBS_MEDIA_STATE */
340 enum LBS_MEDIA_STATE {
341 	LBS_CONNECTED,
342 	LBS_DISCONNECTED
343 };
344 
345 /* LBS_802_11_PRIVACY_FILTER */
346 enum LBS_802_11_PRIVACY_FILTER {
347 	LBS802_11PRIVFILTERACCEPTALL,
348 	LBS802_11PRIVFILTER8021XWEP
349 };
350 
351 /* mv_ms_type */
352 enum mv_ms_type {
353 	MVMS_DAT = 0,
354 	MVMS_CMD = 1,
355 	MVMS_TXDONE = 2,
356 	MVMS_EVENT
357 };
358 
359 /* KEY_TYPE_ID */
360 enum KEY_TYPE_ID {
361 	KEY_TYPE_ID_WEP = 0,
362 	KEY_TYPE_ID_TKIP,
363 	KEY_TYPE_ID_AES
364 };
365 
366 /* KEY_INFO_WPA (applies to both TKIP and AES/CCMP) */
367 enum KEY_INFO_WPA {
368 	KEY_INFO_WPA_MCAST = 0x01,
369 	KEY_INFO_WPA_UNICAST = 0x02,
370 	KEY_INFO_WPA_ENABLED = 0x04
371 };
372 
373 /* Default values for fwt commands. */
374 #define FWT_DEFAULT_METRIC 0
375 #define FWT_DEFAULT_DIR 1
376 /* Default Rate, 11Mbps */
377 #define FWT_DEFAULT_RATE 3
378 #define FWT_DEFAULT_SSN 0xffffffff
379 #define FWT_DEFAULT_DSN 0
380 #define FWT_DEFAULT_HOPCOUNT 0
381 #define FWT_DEFAULT_TTL 0
382 #define FWT_DEFAULT_EXPIRATION 0
383 #define FWT_DEFAULT_SLEEPMODE 0
384 #define FWT_DEFAULT_SNR 0
385 
386 #endif
387