1 /*
2 * Kernel Debug Core
3 *
4 * Maintainer: Jason Wessel <jason.wessel@windriver.com>
5 *
6 * Copyright (C) 2000-2001 VERITAS Software Corporation.
7 * Copyright (C) 2002-2004 Timesys Corporation
8 * Copyright (C) 2003-2004 Amit S. Kale <amitkale@linsyssoft.com>
9 * Copyright (C) 2004 Pavel Machek <pavel@ucw.cz>
10 * Copyright (C) 2004-2006 Tom Rini <trini@kernel.crashing.org>
11 * Copyright (C) 2004-2006 LinSysSoft Technologies Pvt. Ltd.
12 * Copyright (C) 2005-2009 Wind River Systems, Inc.
13 * Copyright (C) 2007 MontaVista Software, Inc.
14 * Copyright (C) 2008 Red Hat, Inc., Ingo Molnar <mingo@redhat.com>
15 *
16 * Contributors at various stages not listed above:
17 * Jason Wessel ( jason.wessel@windriver.com )
18 * George Anzinger <george@mvista.com>
19 * Anurekh Saxena (anurekh.saxena@timesys.com)
20 * Lake Stevens Instrument Division (Glenn Engel)
21 * Jim Kingdon, Cygnus Support.
22 *
23 * Original KGDB stub: David Grothe <dave@gcom.com>,
24 * Tigran Aivazian <tigran@sco.com>
25 *
26 * This file is licensed under the terms of the GNU General Public License
27 * version 2. This program is licensed "as is" without any warranty of any
28 * kind, whether express or implied.
29 */
30
31 #include <linux/kernel.h>
32 #include <linux/sched/signal.h>
33 #include <linux/kgdb.h>
34 #include <linux/kdb.h>
35 #include <linux/serial_core.h>
36 #include <linux/reboot.h>
37 #include <linux/uaccess.h>
38 #include <asm/cacheflush.h>
39 #include <asm/unaligned.h>
40 #include "debug_core.h"
41
42 #define KGDB_MAX_THREAD_QUERY 17
43
44 /* Our I/O buffers. */
45 static char remcom_in_buffer[BUFMAX];
46 static char remcom_out_buffer[BUFMAX];
47 static int gdbstub_use_prev_in_buf;
48 static int gdbstub_prev_in_buf_pos;
49
50 /* Storage for the registers, in GDB format. */
51 static unsigned long gdb_regs[(NUMREGBYTES +
52 sizeof(unsigned long) - 1) /
53 sizeof(unsigned long)];
54
55 /*
56 * GDB remote protocol parser:
57 */
58
59 #ifdef CONFIG_KGDB_KDB
gdbstub_read_wait(void)60 static int gdbstub_read_wait(void)
61 {
62 int ret = -1;
63 int i;
64
65 if (unlikely(gdbstub_use_prev_in_buf)) {
66 if (gdbstub_prev_in_buf_pos < gdbstub_use_prev_in_buf)
67 return remcom_in_buffer[gdbstub_prev_in_buf_pos++];
68 else
69 gdbstub_use_prev_in_buf = 0;
70 }
71
72 /* poll any additional I/O interfaces that are defined */
73 while (ret < 0)
74 for (i = 0; kdb_poll_funcs[i] != NULL; i++) {
75 ret = kdb_poll_funcs[i]();
76 if (ret > 0)
77 break;
78 }
79 return ret;
80 }
81 #else
gdbstub_read_wait(void)82 static int gdbstub_read_wait(void)
83 {
84 int ret = dbg_io_ops->read_char();
85 while (ret == NO_POLL_CHAR)
86 ret = dbg_io_ops->read_char();
87 return ret;
88 }
89 #endif
90 /* scan for the sequence $<data>#<checksum> */
get_packet(char * buffer)91 static void get_packet(char *buffer)
92 {
93 unsigned char checksum;
94 unsigned char xmitcsum;
95 int count;
96 char ch;
97
98 do {
99 /*
100 * Spin and wait around for the start character, ignore all
101 * other characters:
102 */
103 while ((ch = (gdbstub_read_wait())) != '$')
104 /* nothing */;
105
106 kgdb_connected = 1;
107 checksum = 0;
108 xmitcsum = -1;
109
110 count = 0;
111
112 /*
113 * now, read until a # or end of buffer is found:
114 */
115 while (count < (BUFMAX - 1)) {
116 ch = gdbstub_read_wait();
117 if (ch == '#')
118 break;
119 checksum = checksum + ch;
120 buffer[count] = ch;
121 count = count + 1;
122 }
123
124 if (ch == '#') {
125 xmitcsum = hex_to_bin(gdbstub_read_wait()) << 4;
126 xmitcsum += hex_to_bin(gdbstub_read_wait());
127
128 if (checksum != xmitcsum)
129 /* failed checksum */
130 dbg_io_ops->write_char('-');
131 else
132 /* successful transfer */
133 dbg_io_ops->write_char('+');
134 if (dbg_io_ops->flush)
135 dbg_io_ops->flush();
136 }
137 buffer[count] = 0;
138 } while (checksum != xmitcsum);
139 }
140
141 /*
142 * Send the packet in buffer.
143 * Check for gdb connection if asked for.
144 */
put_packet(char * buffer)145 static void put_packet(char *buffer)
146 {
147 unsigned char checksum;
148 int count;
149 char ch;
150
151 /*
152 * $<packet info>#<checksum>.
153 */
154 while (1) {
155 dbg_io_ops->write_char('$');
156 checksum = 0;
157 count = 0;
158
159 while ((ch = buffer[count])) {
160 dbg_io_ops->write_char(ch);
161 checksum += ch;
162 count++;
163 }
164
165 dbg_io_ops->write_char('#');
166 dbg_io_ops->write_char(hex_asc_hi(checksum));
167 dbg_io_ops->write_char(hex_asc_lo(checksum));
168 if (dbg_io_ops->flush)
169 dbg_io_ops->flush();
170
171 /* Now see what we get in reply. */
172 ch = gdbstub_read_wait();
173
174 if (ch == 3)
175 ch = gdbstub_read_wait();
176
177 /* If we get an ACK, we are done. */
178 if (ch == '+')
179 return;
180
181 /*
182 * If we get the start of another packet, this means
183 * that GDB is attempting to reconnect. We will NAK
184 * the packet being sent, and stop trying to send this
185 * packet.
186 */
187 if (ch == '$') {
188 dbg_io_ops->write_char('-');
189 if (dbg_io_ops->flush)
190 dbg_io_ops->flush();
191 return;
192 }
193 }
194 }
195
196 static char gdbmsgbuf[BUFMAX + 1];
197
gdbstub_msg_write(const char * s,int len)198 void gdbstub_msg_write(const char *s, int len)
199 {
200 char *bufptr;
201 int wcount;
202 int i;
203
204 if (len == 0)
205 len = strlen(s);
206
207 /* 'O'utput */
208 gdbmsgbuf[0] = 'O';
209
210 /* Fill and send buffers... */
211 while (len > 0) {
212 bufptr = gdbmsgbuf + 1;
213
214 /* Calculate how many this time */
215 if ((len << 1) > (BUFMAX - 2))
216 wcount = (BUFMAX - 2) >> 1;
217 else
218 wcount = len;
219
220 /* Pack in hex chars */
221 for (i = 0; i < wcount; i++)
222 bufptr = hex_byte_pack(bufptr, s[i]);
223 *bufptr = '\0';
224
225 /* Move up */
226 s += wcount;
227 len -= wcount;
228
229 /* Write packet */
230 put_packet(gdbmsgbuf);
231 }
232 }
233
234 /*
235 * Convert the memory pointed to by mem into hex, placing result in
236 * buf. Return a pointer to the last char put in buf (null). May
237 * return an error.
238 */
kgdb_mem2hex(char * mem,char * buf,int count)239 char *kgdb_mem2hex(char *mem, char *buf, int count)
240 {
241 char *tmp;
242 int err;
243
244 /*
245 * We use the upper half of buf as an intermediate buffer for the
246 * raw memory copy. Hex conversion will work against this one.
247 */
248 tmp = buf + count;
249
250 err = probe_kernel_read(tmp, mem, count);
251 if (err)
252 return NULL;
253 while (count > 0) {
254 buf = hex_byte_pack(buf, *tmp);
255 tmp++;
256 count--;
257 }
258 *buf = 0;
259
260 return buf;
261 }
262
263 /*
264 * Convert the hex array pointed to by buf into binary to be placed in
265 * mem. Return a pointer to the character AFTER the last byte
266 * written. May return an error.
267 */
kgdb_hex2mem(char * buf,char * mem,int count)268 int kgdb_hex2mem(char *buf, char *mem, int count)
269 {
270 char *tmp_raw;
271 char *tmp_hex;
272
273 /*
274 * We use the upper half of buf as an intermediate buffer for the
275 * raw memory that is converted from hex.
276 */
277 tmp_raw = buf + count * 2;
278
279 tmp_hex = tmp_raw - 1;
280 while (tmp_hex >= buf) {
281 tmp_raw--;
282 *tmp_raw = hex_to_bin(*tmp_hex--);
283 *tmp_raw |= hex_to_bin(*tmp_hex--) << 4;
284 }
285
286 return probe_kernel_write(mem, tmp_raw, count);
287 }
288
289 /*
290 * While we find nice hex chars, build a long_val.
291 * Return number of chars processed.
292 */
kgdb_hex2long(char ** ptr,unsigned long * long_val)293 int kgdb_hex2long(char **ptr, unsigned long *long_val)
294 {
295 int hex_val;
296 int num = 0;
297 int negate = 0;
298
299 *long_val = 0;
300
301 if (**ptr == '-') {
302 negate = 1;
303 (*ptr)++;
304 }
305 while (**ptr) {
306 hex_val = hex_to_bin(**ptr);
307 if (hex_val < 0)
308 break;
309
310 *long_val = (*long_val << 4) | hex_val;
311 num++;
312 (*ptr)++;
313 }
314
315 if (negate)
316 *long_val = -*long_val;
317
318 return num;
319 }
320
321 /*
322 * Copy the binary array pointed to by buf into mem. Fix $, #, and
323 * 0x7d escaped with 0x7d. Return -EFAULT on failure or 0 on success.
324 * The input buf is overwitten with the result to write to mem.
325 */
kgdb_ebin2mem(char * buf,char * mem,int count)326 static int kgdb_ebin2mem(char *buf, char *mem, int count)
327 {
328 int size = 0;
329 char *c = buf;
330
331 while (count-- > 0) {
332 c[size] = *buf++;
333 if (c[size] == 0x7d)
334 c[size] = *buf++ ^ 0x20;
335 size++;
336 }
337
338 return probe_kernel_write(mem, c, size);
339 }
340
341 #if DBG_MAX_REG_NUM > 0
pt_regs_to_gdb_regs(unsigned long * gdb_regs,struct pt_regs * regs)342 void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
343 {
344 int i;
345 int idx = 0;
346 char *ptr = (char *)gdb_regs;
347
348 for (i = 0; i < DBG_MAX_REG_NUM; i++) {
349 dbg_get_reg(i, ptr + idx, regs);
350 idx += dbg_reg_def[i].size;
351 }
352 }
353
gdb_regs_to_pt_regs(unsigned long * gdb_regs,struct pt_regs * regs)354 void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs)
355 {
356 int i;
357 int idx = 0;
358 char *ptr = (char *)gdb_regs;
359
360 for (i = 0; i < DBG_MAX_REG_NUM; i++) {
361 dbg_set_reg(i, ptr + idx, regs);
362 idx += dbg_reg_def[i].size;
363 }
364 }
365 #endif /* DBG_MAX_REG_NUM > 0 */
366
367 /* Write memory due to an 'M' or 'X' packet. */
write_mem_msg(int binary)368 static int write_mem_msg(int binary)
369 {
370 char *ptr = &remcom_in_buffer[1];
371 unsigned long addr;
372 unsigned long length;
373 int err;
374
375 if (kgdb_hex2long(&ptr, &addr) > 0 && *(ptr++) == ',' &&
376 kgdb_hex2long(&ptr, &length) > 0 && *(ptr++) == ':') {
377 if (binary)
378 err = kgdb_ebin2mem(ptr, (char *)addr, length);
379 else
380 err = kgdb_hex2mem(ptr, (char *)addr, length);
381 if (err)
382 return err;
383 if (CACHE_FLUSH_IS_SAFE)
384 flush_icache_range(addr, addr + length);
385 return 0;
386 }
387
388 return -EINVAL;
389 }
390
error_packet(char * pkt,int error)391 static void error_packet(char *pkt, int error)
392 {
393 error = -error;
394 pkt[0] = 'E';
395 pkt[1] = hex_asc[(error / 10)];
396 pkt[2] = hex_asc[(error % 10)];
397 pkt[3] = '\0';
398 }
399
400 /*
401 * Thread ID accessors. We represent a flat TID space to GDB, where
402 * the per CPU idle threads (which under Linux all have PID 0) are
403 * remapped to negative TIDs.
404 */
405
406 #define BUF_THREAD_ID_SIZE 8
407
pack_threadid(char * pkt,unsigned char * id)408 static char *pack_threadid(char *pkt, unsigned char *id)
409 {
410 unsigned char *limit;
411 int lzero = 1;
412
413 limit = id + (BUF_THREAD_ID_SIZE / 2);
414 while (id < limit) {
415 if (!lzero || *id != 0) {
416 pkt = hex_byte_pack(pkt, *id);
417 lzero = 0;
418 }
419 id++;
420 }
421
422 if (lzero)
423 pkt = hex_byte_pack(pkt, 0);
424
425 return pkt;
426 }
427
int_to_threadref(unsigned char * id,int value)428 static void int_to_threadref(unsigned char *id, int value)
429 {
430 put_unaligned_be32(value, id);
431 }
432
getthread(struct pt_regs * regs,int tid)433 static struct task_struct *getthread(struct pt_regs *regs, int tid)
434 {
435 /*
436 * Non-positive TIDs are remapped to the cpu shadow information
437 */
438 if (tid == 0 || tid == -1)
439 tid = -atomic_read(&kgdb_active) - 2;
440 if (tid < -1 && tid > -NR_CPUS - 2) {
441 if (kgdb_info[-tid - 2].task)
442 return kgdb_info[-tid - 2].task;
443 else
444 return idle_task(-tid - 2);
445 }
446 if (tid <= 0) {
447 printk(KERN_ERR "KGDB: Internal thread select error\n");
448 dump_stack();
449 return NULL;
450 }
451
452 /*
453 * find_task_by_pid_ns() does not take the tasklist lock anymore
454 * but is nicely RCU locked - hence is a pretty resilient
455 * thing to use:
456 */
457 return find_task_by_pid_ns(tid, &init_pid_ns);
458 }
459
460
461 /*
462 * Remap normal tasks to their real PID,
463 * CPU shadow threads are mapped to -CPU - 2
464 */
shadow_pid(int realpid)465 static inline int shadow_pid(int realpid)
466 {
467 if (realpid)
468 return realpid;
469
470 return -raw_smp_processor_id() - 2;
471 }
472
473 /*
474 * All the functions that start with gdb_cmd are the various
475 * operations to implement the handlers for the gdbserial protocol
476 * where KGDB is communicating with an external debugger
477 */
478
479 /* Handle the '?' status packets */
gdb_cmd_status(struct kgdb_state * ks)480 static void gdb_cmd_status(struct kgdb_state *ks)
481 {
482 /*
483 * We know that this packet is only sent
484 * during initial connect. So to be safe,
485 * we clear out our breakpoints now in case
486 * GDB is reconnecting.
487 */
488 dbg_remove_all_break();
489
490 remcom_out_buffer[0] = 'S';
491 hex_byte_pack(&remcom_out_buffer[1], ks->signo);
492 }
493
gdb_get_regs_helper(struct kgdb_state * ks)494 static void gdb_get_regs_helper(struct kgdb_state *ks)
495 {
496 struct task_struct *thread;
497 void *local_debuggerinfo;
498 int i;
499
500 thread = kgdb_usethread;
501 if (!thread) {
502 thread = kgdb_info[ks->cpu].task;
503 local_debuggerinfo = kgdb_info[ks->cpu].debuggerinfo;
504 } else {
505 local_debuggerinfo = NULL;
506 for_each_online_cpu(i) {
507 /*
508 * Try to find the task on some other
509 * or possibly this node if we do not
510 * find the matching task then we try
511 * to approximate the results.
512 */
513 if (thread == kgdb_info[i].task)
514 local_debuggerinfo = kgdb_info[i].debuggerinfo;
515 }
516 }
517
518 /*
519 * All threads that don't have debuggerinfo should be
520 * in schedule() sleeping, since all other CPUs
521 * are in kgdb_wait, and thus have debuggerinfo.
522 */
523 if (local_debuggerinfo) {
524 pt_regs_to_gdb_regs(gdb_regs, local_debuggerinfo);
525 } else {
526 /*
527 * Pull stuff saved during switch_to; nothing
528 * else is accessible (or even particularly
529 * relevant).
530 *
531 * This should be enough for a stack trace.
532 */
533 sleeping_thread_to_gdb_regs(gdb_regs, thread);
534 }
535 }
536
537 /* Handle the 'g' get registers request */
gdb_cmd_getregs(struct kgdb_state * ks)538 static void gdb_cmd_getregs(struct kgdb_state *ks)
539 {
540 gdb_get_regs_helper(ks);
541 kgdb_mem2hex((char *)gdb_regs, remcom_out_buffer, NUMREGBYTES);
542 }
543
544 /* Handle the 'G' set registers request */
gdb_cmd_setregs(struct kgdb_state * ks)545 static void gdb_cmd_setregs(struct kgdb_state *ks)
546 {
547 kgdb_hex2mem(&remcom_in_buffer[1], (char *)gdb_regs, NUMREGBYTES);
548
549 if (kgdb_usethread && kgdb_usethread != current) {
550 error_packet(remcom_out_buffer, -EINVAL);
551 } else {
552 gdb_regs_to_pt_regs(gdb_regs, ks->linux_regs);
553 strcpy(remcom_out_buffer, "OK");
554 }
555 }
556
557 /* Handle the 'm' memory read bytes */
gdb_cmd_memread(struct kgdb_state * ks)558 static void gdb_cmd_memread(struct kgdb_state *ks)
559 {
560 char *ptr = &remcom_in_buffer[1];
561 unsigned long length;
562 unsigned long addr;
563 char *err;
564
565 if (kgdb_hex2long(&ptr, &addr) > 0 && *ptr++ == ',' &&
566 kgdb_hex2long(&ptr, &length) > 0) {
567 err = kgdb_mem2hex((char *)addr, remcom_out_buffer, length);
568 if (!err)
569 error_packet(remcom_out_buffer, -EINVAL);
570 } else {
571 error_packet(remcom_out_buffer, -EINVAL);
572 }
573 }
574
575 /* Handle the 'M' memory write bytes */
gdb_cmd_memwrite(struct kgdb_state * ks)576 static void gdb_cmd_memwrite(struct kgdb_state *ks)
577 {
578 int err = write_mem_msg(0);
579
580 if (err)
581 error_packet(remcom_out_buffer, err);
582 else
583 strcpy(remcom_out_buffer, "OK");
584 }
585
586 #if DBG_MAX_REG_NUM > 0
gdb_hex_reg_helper(int regnum,char * out)587 static char *gdb_hex_reg_helper(int regnum, char *out)
588 {
589 int i;
590 int offset = 0;
591
592 for (i = 0; i < regnum; i++)
593 offset += dbg_reg_def[i].size;
594 return kgdb_mem2hex((char *)gdb_regs + offset, out,
595 dbg_reg_def[i].size);
596 }
597
598 /* Handle the 'p' individual regster get */
gdb_cmd_reg_get(struct kgdb_state * ks)599 static void gdb_cmd_reg_get(struct kgdb_state *ks)
600 {
601 unsigned long regnum;
602 char *ptr = &remcom_in_buffer[1];
603
604 kgdb_hex2long(&ptr, ®num);
605 if (regnum >= DBG_MAX_REG_NUM) {
606 error_packet(remcom_out_buffer, -EINVAL);
607 return;
608 }
609 gdb_get_regs_helper(ks);
610 gdb_hex_reg_helper(regnum, remcom_out_buffer);
611 }
612
613 /* Handle the 'P' individual regster set */
gdb_cmd_reg_set(struct kgdb_state * ks)614 static void gdb_cmd_reg_set(struct kgdb_state *ks)
615 {
616 unsigned long regnum;
617 char *ptr = &remcom_in_buffer[1];
618 int i = 0;
619
620 kgdb_hex2long(&ptr, ®num);
621 if (*ptr++ != '=' ||
622 !(!kgdb_usethread || kgdb_usethread == current) ||
623 !dbg_get_reg(regnum, gdb_regs, ks->linux_regs)) {
624 error_packet(remcom_out_buffer, -EINVAL);
625 return;
626 }
627 memset(gdb_regs, 0, sizeof(gdb_regs));
628 while (i < sizeof(gdb_regs) * 2)
629 if (hex_to_bin(ptr[i]) >= 0)
630 i++;
631 else
632 break;
633 i = i / 2;
634 kgdb_hex2mem(ptr, (char *)gdb_regs, i);
635 dbg_set_reg(regnum, gdb_regs, ks->linux_regs);
636 strcpy(remcom_out_buffer, "OK");
637 }
638 #endif /* DBG_MAX_REG_NUM > 0 */
639
640 /* Handle the 'X' memory binary write bytes */
gdb_cmd_binwrite(struct kgdb_state * ks)641 static void gdb_cmd_binwrite(struct kgdb_state *ks)
642 {
643 int err = write_mem_msg(1);
644
645 if (err)
646 error_packet(remcom_out_buffer, err);
647 else
648 strcpy(remcom_out_buffer, "OK");
649 }
650
651 /* Handle the 'D' or 'k', detach or kill packets */
gdb_cmd_detachkill(struct kgdb_state * ks)652 static void gdb_cmd_detachkill(struct kgdb_state *ks)
653 {
654 int error;
655
656 /* The detach case */
657 if (remcom_in_buffer[0] == 'D') {
658 error = dbg_remove_all_break();
659 if (error < 0) {
660 error_packet(remcom_out_buffer, error);
661 } else {
662 strcpy(remcom_out_buffer, "OK");
663 kgdb_connected = 0;
664 }
665 put_packet(remcom_out_buffer);
666 } else {
667 /*
668 * Assume the kill case, with no exit code checking,
669 * trying to force detach the debugger:
670 */
671 dbg_remove_all_break();
672 kgdb_connected = 0;
673 }
674 }
675
676 /* Handle the 'R' reboot packets */
gdb_cmd_reboot(struct kgdb_state * ks)677 static int gdb_cmd_reboot(struct kgdb_state *ks)
678 {
679 /* For now, only honor R0 */
680 if (strcmp(remcom_in_buffer, "R0") == 0) {
681 printk(KERN_CRIT "Executing emergency reboot\n");
682 strcpy(remcom_out_buffer, "OK");
683 put_packet(remcom_out_buffer);
684
685 /*
686 * Execution should not return from
687 * machine_emergency_restart()
688 */
689 machine_emergency_restart();
690 kgdb_connected = 0;
691
692 return 1;
693 }
694 return 0;
695 }
696
697 /* Handle the 'q' query packets */
gdb_cmd_query(struct kgdb_state * ks)698 static void gdb_cmd_query(struct kgdb_state *ks)
699 {
700 struct task_struct *g;
701 struct task_struct *p;
702 unsigned char thref[BUF_THREAD_ID_SIZE];
703 char *ptr;
704 int i;
705 int cpu;
706 int finished = 0;
707
708 switch (remcom_in_buffer[1]) {
709 case 's':
710 case 'f':
711 if (memcmp(remcom_in_buffer + 2, "ThreadInfo", 10))
712 break;
713
714 i = 0;
715 remcom_out_buffer[0] = 'm';
716 ptr = remcom_out_buffer + 1;
717 if (remcom_in_buffer[1] == 'f') {
718 /* Each cpu is a shadow thread */
719 for_each_online_cpu(cpu) {
720 ks->thr_query = 0;
721 int_to_threadref(thref, -cpu - 2);
722 ptr = pack_threadid(ptr, thref);
723 *(ptr++) = ',';
724 i++;
725 }
726 }
727
728 do_each_thread(g, p) {
729 if (i >= ks->thr_query && !finished) {
730 int_to_threadref(thref, p->pid);
731 ptr = pack_threadid(ptr, thref);
732 *(ptr++) = ',';
733 ks->thr_query++;
734 if (ks->thr_query % KGDB_MAX_THREAD_QUERY == 0)
735 finished = 1;
736 }
737 i++;
738 } while_each_thread(g, p);
739
740 *(--ptr) = '\0';
741 break;
742
743 case 'C':
744 /* Current thread id */
745 strcpy(remcom_out_buffer, "QC");
746 ks->threadid = shadow_pid(current->pid);
747 int_to_threadref(thref, ks->threadid);
748 pack_threadid(remcom_out_buffer + 2, thref);
749 break;
750 case 'T':
751 if (memcmp(remcom_in_buffer + 1, "ThreadExtraInfo,", 16))
752 break;
753
754 ks->threadid = 0;
755 ptr = remcom_in_buffer + 17;
756 kgdb_hex2long(&ptr, &ks->threadid);
757 if (!getthread(ks->linux_regs, ks->threadid)) {
758 error_packet(remcom_out_buffer, -EINVAL);
759 break;
760 }
761 if ((int)ks->threadid > 0) {
762 kgdb_mem2hex(getthread(ks->linux_regs,
763 ks->threadid)->comm,
764 remcom_out_buffer, 16);
765 } else {
766 static char tmpstr[23 + BUF_THREAD_ID_SIZE];
767
768 sprintf(tmpstr, "shadowCPU%d",
769 (int)(-ks->threadid - 2));
770 kgdb_mem2hex(tmpstr, remcom_out_buffer, strlen(tmpstr));
771 }
772 break;
773 #ifdef CONFIG_KGDB_KDB
774 case 'R':
775 if (strncmp(remcom_in_buffer, "qRcmd,", 6) == 0) {
776 int len = strlen(remcom_in_buffer + 6);
777
778 if ((len % 2) != 0) {
779 strcpy(remcom_out_buffer, "E01");
780 break;
781 }
782 kgdb_hex2mem(remcom_in_buffer + 6,
783 remcom_out_buffer, len);
784 len = len / 2;
785 remcom_out_buffer[len++] = 0;
786
787 kdb_common_init_state(ks);
788 kdb_parse(remcom_out_buffer);
789 kdb_common_deinit_state();
790
791 strcpy(remcom_out_buffer, "OK");
792 }
793 break;
794 #endif
795 }
796 }
797
798 /* Handle the 'H' task query packets */
gdb_cmd_task(struct kgdb_state * ks)799 static void gdb_cmd_task(struct kgdb_state *ks)
800 {
801 struct task_struct *thread;
802 char *ptr;
803
804 switch (remcom_in_buffer[1]) {
805 case 'g':
806 ptr = &remcom_in_buffer[2];
807 kgdb_hex2long(&ptr, &ks->threadid);
808 thread = getthread(ks->linux_regs, ks->threadid);
809 if (!thread && ks->threadid > 0) {
810 error_packet(remcom_out_buffer, -EINVAL);
811 break;
812 }
813 kgdb_usethread = thread;
814 ks->kgdb_usethreadid = ks->threadid;
815 strcpy(remcom_out_buffer, "OK");
816 break;
817 case 'c':
818 ptr = &remcom_in_buffer[2];
819 kgdb_hex2long(&ptr, &ks->threadid);
820 if (!ks->threadid) {
821 kgdb_contthread = NULL;
822 } else {
823 thread = getthread(ks->linux_regs, ks->threadid);
824 if (!thread && ks->threadid > 0) {
825 error_packet(remcom_out_buffer, -EINVAL);
826 break;
827 }
828 kgdb_contthread = thread;
829 }
830 strcpy(remcom_out_buffer, "OK");
831 break;
832 }
833 }
834
835 /* Handle the 'T' thread query packets */
gdb_cmd_thread(struct kgdb_state * ks)836 static void gdb_cmd_thread(struct kgdb_state *ks)
837 {
838 char *ptr = &remcom_in_buffer[1];
839 struct task_struct *thread;
840
841 kgdb_hex2long(&ptr, &ks->threadid);
842 thread = getthread(ks->linux_regs, ks->threadid);
843 if (thread)
844 strcpy(remcom_out_buffer, "OK");
845 else
846 error_packet(remcom_out_buffer, -EINVAL);
847 }
848
849 /* Handle the 'z' or 'Z' breakpoint remove or set packets */
gdb_cmd_break(struct kgdb_state * ks)850 static void gdb_cmd_break(struct kgdb_state *ks)
851 {
852 /*
853 * Since GDB-5.3, it's been drafted that '0' is a software
854 * breakpoint, '1' is a hardware breakpoint, so let's do that.
855 */
856 char *bpt_type = &remcom_in_buffer[1];
857 char *ptr = &remcom_in_buffer[2];
858 unsigned long addr;
859 unsigned long length;
860 int error = 0;
861
862 if (arch_kgdb_ops.set_hw_breakpoint && *bpt_type >= '1') {
863 /* Unsupported */
864 if (*bpt_type > '4')
865 return;
866 } else {
867 if (*bpt_type != '0' && *bpt_type != '1')
868 /* Unsupported. */
869 return;
870 }
871
872 /*
873 * Test if this is a hardware breakpoint, and
874 * if we support it:
875 */
876 if (*bpt_type == '1' && !(arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT))
877 /* Unsupported. */
878 return;
879
880 if (*(ptr++) != ',') {
881 error_packet(remcom_out_buffer, -EINVAL);
882 return;
883 }
884 if (!kgdb_hex2long(&ptr, &addr)) {
885 error_packet(remcom_out_buffer, -EINVAL);
886 return;
887 }
888 if (*(ptr++) != ',' ||
889 !kgdb_hex2long(&ptr, &length)) {
890 error_packet(remcom_out_buffer, -EINVAL);
891 return;
892 }
893
894 if (remcom_in_buffer[0] == 'Z' && *bpt_type == '0')
895 error = dbg_set_sw_break(addr);
896 else if (remcom_in_buffer[0] == 'z' && *bpt_type == '0')
897 error = dbg_remove_sw_break(addr);
898 else if (remcom_in_buffer[0] == 'Z')
899 error = arch_kgdb_ops.set_hw_breakpoint(addr,
900 (int)length, *bpt_type - '0');
901 else if (remcom_in_buffer[0] == 'z')
902 error = arch_kgdb_ops.remove_hw_breakpoint(addr,
903 (int) length, *bpt_type - '0');
904
905 if (error == 0)
906 strcpy(remcom_out_buffer, "OK");
907 else
908 error_packet(remcom_out_buffer, error);
909 }
910
911 /* Handle the 'C' signal / exception passing packets */
gdb_cmd_exception_pass(struct kgdb_state * ks)912 static int gdb_cmd_exception_pass(struct kgdb_state *ks)
913 {
914 /* C09 == pass exception
915 * C15 == detach kgdb, pass exception
916 */
917 if (remcom_in_buffer[1] == '0' && remcom_in_buffer[2] == '9') {
918
919 ks->pass_exception = 1;
920 remcom_in_buffer[0] = 'c';
921
922 } else if (remcom_in_buffer[1] == '1' && remcom_in_buffer[2] == '5') {
923
924 ks->pass_exception = 1;
925 remcom_in_buffer[0] = 'D';
926 dbg_remove_all_break();
927 kgdb_connected = 0;
928 return 1;
929
930 } else {
931 gdbstub_msg_write("KGDB only knows signal 9 (pass)"
932 " and 15 (pass and disconnect)\n"
933 "Executing a continue without signal passing\n", 0);
934 remcom_in_buffer[0] = 'c';
935 }
936
937 /* Indicate fall through */
938 return -1;
939 }
940
941 /*
942 * This function performs all gdbserial command procesing
943 */
gdb_serial_stub(struct kgdb_state * ks)944 int gdb_serial_stub(struct kgdb_state *ks)
945 {
946 int error = 0;
947 int tmp;
948
949 /* Initialize comm buffer and globals. */
950 memset(remcom_out_buffer, 0, sizeof(remcom_out_buffer));
951 kgdb_usethread = kgdb_info[ks->cpu].task;
952 ks->kgdb_usethreadid = shadow_pid(kgdb_info[ks->cpu].task->pid);
953 ks->pass_exception = 0;
954
955 if (kgdb_connected) {
956 unsigned char thref[BUF_THREAD_ID_SIZE];
957 char *ptr;
958
959 /* Reply to host that an exception has occurred */
960 ptr = remcom_out_buffer;
961 *ptr++ = 'T';
962 ptr = hex_byte_pack(ptr, ks->signo);
963 ptr += strlen(strcpy(ptr, "thread:"));
964 int_to_threadref(thref, shadow_pid(current->pid));
965 ptr = pack_threadid(ptr, thref);
966 *ptr++ = ';';
967 put_packet(remcom_out_buffer);
968 }
969
970 while (1) {
971 error = 0;
972
973 /* Clear the out buffer. */
974 memset(remcom_out_buffer, 0, sizeof(remcom_out_buffer));
975
976 get_packet(remcom_in_buffer);
977
978 switch (remcom_in_buffer[0]) {
979 case '?': /* gdbserial status */
980 gdb_cmd_status(ks);
981 break;
982 case 'g': /* return the value of the CPU registers */
983 gdb_cmd_getregs(ks);
984 break;
985 case 'G': /* set the value of the CPU registers - return OK */
986 gdb_cmd_setregs(ks);
987 break;
988 case 'm': /* mAA..AA,LLLL Read LLLL bytes at address AA..AA */
989 gdb_cmd_memread(ks);
990 break;
991 case 'M': /* MAA..AA,LLLL: Write LLLL bytes at address AA..AA */
992 gdb_cmd_memwrite(ks);
993 break;
994 #if DBG_MAX_REG_NUM > 0
995 case 'p': /* pXX Return gdb register XX (in hex) */
996 gdb_cmd_reg_get(ks);
997 break;
998 case 'P': /* PXX=aaaa Set gdb register XX to aaaa (in hex) */
999 gdb_cmd_reg_set(ks);
1000 break;
1001 #endif /* DBG_MAX_REG_NUM > 0 */
1002 case 'X': /* XAA..AA,LLLL: Write LLLL bytes at address AA..AA */
1003 gdb_cmd_binwrite(ks);
1004 break;
1005 /* kill or detach. KGDB should treat this like a
1006 * continue.
1007 */
1008 case 'D': /* Debugger detach */
1009 case 'k': /* Debugger detach via kill */
1010 gdb_cmd_detachkill(ks);
1011 goto default_handle;
1012 case 'R': /* Reboot */
1013 if (gdb_cmd_reboot(ks))
1014 goto default_handle;
1015 break;
1016 case 'q': /* query command */
1017 gdb_cmd_query(ks);
1018 break;
1019 case 'H': /* task related */
1020 gdb_cmd_task(ks);
1021 break;
1022 case 'T': /* Query thread status */
1023 gdb_cmd_thread(ks);
1024 break;
1025 case 'z': /* Break point remove */
1026 case 'Z': /* Break point set */
1027 gdb_cmd_break(ks);
1028 break;
1029 #ifdef CONFIG_KGDB_KDB
1030 case '3': /* Escape into back into kdb */
1031 if (remcom_in_buffer[1] == '\0') {
1032 gdb_cmd_detachkill(ks);
1033 return DBG_PASS_EVENT;
1034 }
1035 #endif
1036 case 'C': /* Exception passing */
1037 tmp = gdb_cmd_exception_pass(ks);
1038 if (tmp > 0)
1039 goto default_handle;
1040 if (tmp == 0)
1041 break;
1042 /* Fall through on tmp < 0 */
1043 case 'c': /* Continue packet */
1044 case 's': /* Single step packet */
1045 if (kgdb_contthread && kgdb_contthread != current) {
1046 /* Can't switch threads in kgdb */
1047 error_packet(remcom_out_buffer, -EINVAL);
1048 break;
1049 }
1050 dbg_activate_sw_breakpoints();
1051 /* Fall through to default processing */
1052 default:
1053 default_handle:
1054 error = kgdb_arch_handle_exception(ks->ex_vector,
1055 ks->signo,
1056 ks->err_code,
1057 remcom_in_buffer,
1058 remcom_out_buffer,
1059 ks->linux_regs);
1060 /*
1061 * Leave cmd processing on error, detach,
1062 * kill, continue, or single step.
1063 */
1064 if (error >= 0 || remcom_in_buffer[0] == 'D' ||
1065 remcom_in_buffer[0] == 'k') {
1066 error = 0;
1067 goto kgdb_exit;
1068 }
1069
1070 }
1071
1072 /* reply to the request */
1073 put_packet(remcom_out_buffer);
1074 }
1075
1076 kgdb_exit:
1077 if (ks->pass_exception)
1078 error = 1;
1079 return error;
1080 }
1081
gdbstub_state(struct kgdb_state * ks,char * cmd)1082 int gdbstub_state(struct kgdb_state *ks, char *cmd)
1083 {
1084 int error;
1085
1086 switch (cmd[0]) {
1087 case 'e':
1088 error = kgdb_arch_handle_exception(ks->ex_vector,
1089 ks->signo,
1090 ks->err_code,
1091 remcom_in_buffer,
1092 remcom_out_buffer,
1093 ks->linux_regs);
1094 return error;
1095 case 's':
1096 case 'c':
1097 strcpy(remcom_in_buffer, cmd);
1098 return 0;
1099 case '$':
1100 strcpy(remcom_in_buffer, cmd);
1101 gdbstub_use_prev_in_buf = strlen(remcom_in_buffer);
1102 gdbstub_prev_in_buf_pos = 0;
1103 return 0;
1104 }
1105 dbg_io_ops->write_char('+');
1106 put_packet(remcom_out_buffer);
1107 return 0;
1108 }
1109
1110 /**
1111 * gdbstub_exit - Send an exit message to GDB
1112 * @status: The exit code to report.
1113 */
gdbstub_exit(int status)1114 void gdbstub_exit(int status)
1115 {
1116 unsigned char checksum, ch, buffer[3];
1117 int loop;
1118
1119 if (!kgdb_connected)
1120 return;
1121 kgdb_connected = 0;
1122
1123 if (!dbg_io_ops || dbg_kdb_mode)
1124 return;
1125
1126 buffer[0] = 'W';
1127 buffer[1] = hex_asc_hi(status);
1128 buffer[2] = hex_asc_lo(status);
1129
1130 dbg_io_ops->write_char('$');
1131 checksum = 0;
1132
1133 for (loop = 0; loop < 3; loop++) {
1134 ch = buffer[loop];
1135 checksum += ch;
1136 dbg_io_ops->write_char(ch);
1137 }
1138
1139 dbg_io_ops->write_char('#');
1140 dbg_io_ops->write_char(hex_asc_hi(checksum));
1141 dbg_io_ops->write_char(hex_asc_lo(checksum));
1142
1143 /* make sure the output is flushed, lest the bootloader clobber it */
1144 if (dbg_io_ops->flush)
1145 dbg_io_ops->flush();
1146 }
1147
