1 /*
2 * Copyright © 2006-2017 Intel Corporation
3 *
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the "Software"),
6 * to deal in the Software without restriction, including without limitation
7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8 * and/or sell copies of the Software, and to permit persons to whom the
9 * Software is furnished to do so, subject to the following conditions:
10 *
11 * The above copyright notice and this permission notice (including the next
12 * paragraph) shall be included in all copies or substantial portions of the
13 * Software.
14 *
15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
21 * DEALINGS IN THE SOFTWARE.
22 */
23
24 #include <linux/time.h>
25
26 #include "intel_atomic.h"
27 #include "intel_bw.h"
28 #include "intel_cdclk.h"
29 #include "intel_display_types.h"
30 #include "intel_sideband.h"
31
32 /**
33 * DOC: CDCLK / RAWCLK
34 *
35 * The display engine uses several different clocks to do its work. There
36 * are two main clocks involved that aren't directly related to the actual
37 * pixel clock or any symbol/bit clock of the actual output port. These
38 * are the core display clock (CDCLK) and RAWCLK.
39 *
40 * CDCLK clocks most of the display pipe logic, and thus its frequency
41 * must be high enough to support the rate at which pixels are flowing
42 * through the pipes. Downscaling must also be accounted as that increases
43 * the effective pixel rate.
44 *
45 * On several platforms the CDCLK frequency can be changed dynamically
46 * to minimize power consumption for a given display configuration.
47 * Typically changes to the CDCLK frequency require all the display pipes
48 * to be shut down while the frequency is being changed.
49 *
50 * On SKL+ the DMC will toggle the CDCLK off/on during DC5/6 entry/exit.
51 * DMC will not change the active CDCLK frequency however, so that part
52 * will still be performed by the driver directly.
53 *
54 * RAWCLK is a fixed frequency clock, often used by various auxiliary
55 * blocks such as AUX CH or backlight PWM. Hence the only thing we
56 * really need to know about RAWCLK is its frequency so that various
57 * dividers can be programmed correctly.
58 */
59
fixed_133mhz_get_cdclk(struct drm_i915_private * dev_priv,struct intel_cdclk_config * cdclk_config)60 static void fixed_133mhz_get_cdclk(struct drm_i915_private *dev_priv,
61 struct intel_cdclk_config *cdclk_config)
62 {
63 cdclk_config->cdclk = 133333;
64 }
65
fixed_200mhz_get_cdclk(struct drm_i915_private * dev_priv,struct intel_cdclk_config * cdclk_config)66 static void fixed_200mhz_get_cdclk(struct drm_i915_private *dev_priv,
67 struct intel_cdclk_config *cdclk_config)
68 {
69 cdclk_config->cdclk = 200000;
70 }
71
fixed_266mhz_get_cdclk(struct drm_i915_private * dev_priv,struct intel_cdclk_config * cdclk_config)72 static void fixed_266mhz_get_cdclk(struct drm_i915_private *dev_priv,
73 struct intel_cdclk_config *cdclk_config)
74 {
75 cdclk_config->cdclk = 266667;
76 }
77
fixed_333mhz_get_cdclk(struct drm_i915_private * dev_priv,struct intel_cdclk_config * cdclk_config)78 static void fixed_333mhz_get_cdclk(struct drm_i915_private *dev_priv,
79 struct intel_cdclk_config *cdclk_config)
80 {
81 cdclk_config->cdclk = 333333;
82 }
83
fixed_400mhz_get_cdclk(struct drm_i915_private * dev_priv,struct intel_cdclk_config * cdclk_config)84 static void fixed_400mhz_get_cdclk(struct drm_i915_private *dev_priv,
85 struct intel_cdclk_config *cdclk_config)
86 {
87 cdclk_config->cdclk = 400000;
88 }
89
fixed_450mhz_get_cdclk(struct drm_i915_private * dev_priv,struct intel_cdclk_config * cdclk_config)90 static void fixed_450mhz_get_cdclk(struct drm_i915_private *dev_priv,
91 struct intel_cdclk_config *cdclk_config)
92 {
93 cdclk_config->cdclk = 450000;
94 }
95
i85x_get_cdclk(struct drm_i915_private * dev_priv,struct intel_cdclk_config * cdclk_config)96 static void i85x_get_cdclk(struct drm_i915_private *dev_priv,
97 struct intel_cdclk_config *cdclk_config)
98 {
99 struct pci_dev *pdev = dev_priv->drm.pdev;
100 u16 hpllcc = 0;
101
102 /*
103 * 852GM/852GMV only supports 133 MHz and the HPLLCC
104 * encoding is different :(
105 * FIXME is this the right way to detect 852GM/852GMV?
106 */
107 if (pdev->revision == 0x1) {
108 cdclk_config->cdclk = 133333;
109 return;
110 }
111
112 pci_bus_read_config_word(pdev->bus,
113 PCI_DEVFN(0, 3), HPLLCC, &hpllcc);
114
115 /* Assume that the hardware is in the high speed state. This
116 * should be the default.
117 */
118 switch (hpllcc & GC_CLOCK_CONTROL_MASK) {
119 case GC_CLOCK_133_200:
120 case GC_CLOCK_133_200_2:
121 case GC_CLOCK_100_200:
122 cdclk_config->cdclk = 200000;
123 break;
124 case GC_CLOCK_166_250:
125 cdclk_config->cdclk = 250000;
126 break;
127 case GC_CLOCK_100_133:
128 cdclk_config->cdclk = 133333;
129 break;
130 case GC_CLOCK_133_266:
131 case GC_CLOCK_133_266_2:
132 case GC_CLOCK_166_266:
133 cdclk_config->cdclk = 266667;
134 break;
135 }
136 }
137
i915gm_get_cdclk(struct drm_i915_private * dev_priv,struct intel_cdclk_config * cdclk_config)138 static void i915gm_get_cdclk(struct drm_i915_private *dev_priv,
139 struct intel_cdclk_config *cdclk_config)
140 {
141 struct pci_dev *pdev = dev_priv->drm.pdev;
142 u16 gcfgc = 0;
143
144 pci_read_config_word(pdev, GCFGC, &gcfgc);
145
146 if (gcfgc & GC_LOW_FREQUENCY_ENABLE) {
147 cdclk_config->cdclk = 133333;
148 return;
149 }
150
151 switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
152 case GC_DISPLAY_CLOCK_333_320_MHZ:
153 cdclk_config->cdclk = 333333;
154 break;
155 default:
156 case GC_DISPLAY_CLOCK_190_200_MHZ:
157 cdclk_config->cdclk = 190000;
158 break;
159 }
160 }
161
i945gm_get_cdclk(struct drm_i915_private * dev_priv,struct intel_cdclk_config * cdclk_config)162 static void i945gm_get_cdclk(struct drm_i915_private *dev_priv,
163 struct intel_cdclk_config *cdclk_config)
164 {
165 struct pci_dev *pdev = dev_priv->drm.pdev;
166 u16 gcfgc = 0;
167
168 pci_read_config_word(pdev, GCFGC, &gcfgc);
169
170 if (gcfgc & GC_LOW_FREQUENCY_ENABLE) {
171 cdclk_config->cdclk = 133333;
172 return;
173 }
174
175 switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
176 case GC_DISPLAY_CLOCK_333_320_MHZ:
177 cdclk_config->cdclk = 320000;
178 break;
179 default:
180 case GC_DISPLAY_CLOCK_190_200_MHZ:
181 cdclk_config->cdclk = 200000;
182 break;
183 }
184 }
185
intel_hpll_vco(struct drm_i915_private * dev_priv)186 static unsigned int intel_hpll_vco(struct drm_i915_private *dev_priv)
187 {
188 static const unsigned int blb_vco[8] = {
189 [0] = 3200000,
190 [1] = 4000000,
191 [2] = 5333333,
192 [3] = 4800000,
193 [4] = 6400000,
194 };
195 static const unsigned int pnv_vco[8] = {
196 [0] = 3200000,
197 [1] = 4000000,
198 [2] = 5333333,
199 [3] = 4800000,
200 [4] = 2666667,
201 };
202 static const unsigned int cl_vco[8] = {
203 [0] = 3200000,
204 [1] = 4000000,
205 [2] = 5333333,
206 [3] = 6400000,
207 [4] = 3333333,
208 [5] = 3566667,
209 [6] = 4266667,
210 };
211 static const unsigned int elk_vco[8] = {
212 [0] = 3200000,
213 [1] = 4000000,
214 [2] = 5333333,
215 [3] = 4800000,
216 };
217 static const unsigned int ctg_vco[8] = {
218 [0] = 3200000,
219 [1] = 4000000,
220 [2] = 5333333,
221 [3] = 6400000,
222 [4] = 2666667,
223 [5] = 4266667,
224 };
225 const unsigned int *vco_table;
226 unsigned int vco;
227 u8 tmp = 0;
228
229 /* FIXME other chipsets? */
230 if (IS_GM45(dev_priv))
231 vco_table = ctg_vco;
232 else if (IS_G45(dev_priv))
233 vco_table = elk_vco;
234 else if (IS_I965GM(dev_priv))
235 vco_table = cl_vco;
236 else if (IS_PINEVIEW(dev_priv))
237 vco_table = pnv_vco;
238 else if (IS_G33(dev_priv))
239 vco_table = blb_vco;
240 else
241 return 0;
242
243 tmp = intel_de_read(dev_priv,
244 IS_PINEVIEW(dev_priv) || IS_MOBILE(dev_priv) ? HPLLVCO_MOBILE : HPLLVCO);
245
246 vco = vco_table[tmp & 0x7];
247 if (vco == 0)
248 drm_err(&dev_priv->drm, "Bad HPLL VCO (HPLLVCO=0x%02x)\n",
249 tmp);
250 else
251 drm_dbg_kms(&dev_priv->drm, "HPLL VCO %u kHz\n", vco);
252
253 return vco;
254 }
255
g33_get_cdclk(struct drm_i915_private * dev_priv,struct intel_cdclk_config * cdclk_config)256 static void g33_get_cdclk(struct drm_i915_private *dev_priv,
257 struct intel_cdclk_config *cdclk_config)
258 {
259 struct pci_dev *pdev = dev_priv->drm.pdev;
260 static const u8 div_3200[] = { 12, 10, 8, 7, 5, 16 };
261 static const u8 div_4000[] = { 14, 12, 10, 8, 6, 20 };
262 static const u8 div_4800[] = { 20, 14, 12, 10, 8, 24 };
263 static const u8 div_5333[] = { 20, 16, 12, 12, 8, 28 };
264 const u8 *div_table;
265 unsigned int cdclk_sel;
266 u16 tmp = 0;
267
268 cdclk_config->vco = intel_hpll_vco(dev_priv);
269
270 pci_read_config_word(pdev, GCFGC, &tmp);
271
272 cdclk_sel = (tmp >> 4) & 0x7;
273
274 if (cdclk_sel >= ARRAY_SIZE(div_3200))
275 goto fail;
276
277 switch (cdclk_config->vco) {
278 case 3200000:
279 div_table = div_3200;
280 break;
281 case 4000000:
282 div_table = div_4000;
283 break;
284 case 4800000:
285 div_table = div_4800;
286 break;
287 case 5333333:
288 div_table = div_5333;
289 break;
290 default:
291 goto fail;
292 }
293
294 cdclk_config->cdclk = DIV_ROUND_CLOSEST(cdclk_config->vco,
295 div_table[cdclk_sel]);
296 return;
297
298 fail:
299 drm_err(&dev_priv->drm,
300 "Unable to determine CDCLK. HPLL VCO=%u kHz, CFGC=0x%08x\n",
301 cdclk_config->vco, tmp);
302 cdclk_config->cdclk = 190476;
303 }
304
pnv_get_cdclk(struct drm_i915_private * dev_priv,struct intel_cdclk_config * cdclk_config)305 static void pnv_get_cdclk(struct drm_i915_private *dev_priv,
306 struct intel_cdclk_config *cdclk_config)
307 {
308 struct pci_dev *pdev = dev_priv->drm.pdev;
309 u16 gcfgc = 0;
310
311 pci_read_config_word(pdev, GCFGC, &gcfgc);
312
313 switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
314 case GC_DISPLAY_CLOCK_267_MHZ_PNV:
315 cdclk_config->cdclk = 266667;
316 break;
317 case GC_DISPLAY_CLOCK_333_MHZ_PNV:
318 cdclk_config->cdclk = 333333;
319 break;
320 case GC_DISPLAY_CLOCK_444_MHZ_PNV:
321 cdclk_config->cdclk = 444444;
322 break;
323 case GC_DISPLAY_CLOCK_200_MHZ_PNV:
324 cdclk_config->cdclk = 200000;
325 break;
326 default:
327 drm_err(&dev_priv->drm,
328 "Unknown pnv display core clock 0x%04x\n", gcfgc);
329 fallthrough;
330 case GC_DISPLAY_CLOCK_133_MHZ_PNV:
331 cdclk_config->cdclk = 133333;
332 break;
333 case GC_DISPLAY_CLOCK_167_MHZ_PNV:
334 cdclk_config->cdclk = 166667;
335 break;
336 }
337 }
338
i965gm_get_cdclk(struct drm_i915_private * dev_priv,struct intel_cdclk_config * cdclk_config)339 static void i965gm_get_cdclk(struct drm_i915_private *dev_priv,
340 struct intel_cdclk_config *cdclk_config)
341 {
342 struct pci_dev *pdev = dev_priv->drm.pdev;
343 static const u8 div_3200[] = { 16, 10, 8 };
344 static const u8 div_4000[] = { 20, 12, 10 };
345 static const u8 div_5333[] = { 24, 16, 14 };
346 const u8 *div_table;
347 unsigned int cdclk_sel;
348 u16 tmp = 0;
349
350 cdclk_config->vco = intel_hpll_vco(dev_priv);
351
352 pci_read_config_word(pdev, GCFGC, &tmp);
353
354 cdclk_sel = ((tmp >> 8) & 0x1f) - 1;
355
356 if (cdclk_sel >= ARRAY_SIZE(div_3200))
357 goto fail;
358
359 switch (cdclk_config->vco) {
360 case 3200000:
361 div_table = div_3200;
362 break;
363 case 4000000:
364 div_table = div_4000;
365 break;
366 case 5333333:
367 div_table = div_5333;
368 break;
369 default:
370 goto fail;
371 }
372
373 cdclk_config->cdclk = DIV_ROUND_CLOSEST(cdclk_config->vco,
374 div_table[cdclk_sel]);
375 return;
376
377 fail:
378 drm_err(&dev_priv->drm,
379 "Unable to determine CDCLK. HPLL VCO=%u kHz, CFGC=0x%04x\n",
380 cdclk_config->vco, tmp);
381 cdclk_config->cdclk = 200000;
382 }
383
gm45_get_cdclk(struct drm_i915_private * dev_priv,struct intel_cdclk_config * cdclk_config)384 static void gm45_get_cdclk(struct drm_i915_private *dev_priv,
385 struct intel_cdclk_config *cdclk_config)
386 {
387 struct pci_dev *pdev = dev_priv->drm.pdev;
388 unsigned int cdclk_sel;
389 u16 tmp = 0;
390
391 cdclk_config->vco = intel_hpll_vco(dev_priv);
392
393 pci_read_config_word(pdev, GCFGC, &tmp);
394
395 cdclk_sel = (tmp >> 12) & 0x1;
396
397 switch (cdclk_config->vco) {
398 case 2666667:
399 case 4000000:
400 case 5333333:
401 cdclk_config->cdclk = cdclk_sel ? 333333 : 222222;
402 break;
403 case 3200000:
404 cdclk_config->cdclk = cdclk_sel ? 320000 : 228571;
405 break;
406 default:
407 drm_err(&dev_priv->drm,
408 "Unable to determine CDCLK. HPLL VCO=%u, CFGC=0x%04x\n",
409 cdclk_config->vco, tmp);
410 cdclk_config->cdclk = 222222;
411 break;
412 }
413 }
414
hsw_get_cdclk(struct drm_i915_private * dev_priv,struct intel_cdclk_config * cdclk_config)415 static void hsw_get_cdclk(struct drm_i915_private *dev_priv,
416 struct intel_cdclk_config *cdclk_config)
417 {
418 u32 lcpll = intel_de_read(dev_priv, LCPLL_CTL);
419 u32 freq = lcpll & LCPLL_CLK_FREQ_MASK;
420
421 if (lcpll & LCPLL_CD_SOURCE_FCLK)
422 cdclk_config->cdclk = 800000;
423 else if (intel_de_read(dev_priv, FUSE_STRAP) & HSW_CDCLK_LIMIT)
424 cdclk_config->cdclk = 450000;
425 else if (freq == LCPLL_CLK_FREQ_450)
426 cdclk_config->cdclk = 450000;
427 else if (IS_HSW_ULT(dev_priv))
428 cdclk_config->cdclk = 337500;
429 else
430 cdclk_config->cdclk = 540000;
431 }
432
vlv_calc_cdclk(struct drm_i915_private * dev_priv,int min_cdclk)433 static int vlv_calc_cdclk(struct drm_i915_private *dev_priv, int min_cdclk)
434 {
435 int freq_320 = (dev_priv->hpll_freq << 1) % 320000 != 0 ?
436 333333 : 320000;
437
438 /*
439 * We seem to get an unstable or solid color picture at 200MHz.
440 * Not sure what's wrong. For now use 200MHz only when all pipes
441 * are off.
442 */
443 if (IS_VALLEYVIEW(dev_priv) && min_cdclk > freq_320)
444 return 400000;
445 else if (min_cdclk > 266667)
446 return freq_320;
447 else if (min_cdclk > 0)
448 return 266667;
449 else
450 return 200000;
451 }
452
vlv_calc_voltage_level(struct drm_i915_private * dev_priv,int cdclk)453 static u8 vlv_calc_voltage_level(struct drm_i915_private *dev_priv, int cdclk)
454 {
455 if (IS_VALLEYVIEW(dev_priv)) {
456 if (cdclk >= 320000) /* jump to highest voltage for 400MHz too */
457 return 2;
458 else if (cdclk >= 266667)
459 return 1;
460 else
461 return 0;
462 } else {
463 /*
464 * Specs are full of misinformation, but testing on actual
465 * hardware has shown that we just need to write the desired
466 * CCK divider into the Punit register.
467 */
468 return DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1, cdclk) - 1;
469 }
470 }
471
vlv_get_cdclk(struct drm_i915_private * dev_priv,struct intel_cdclk_config * cdclk_config)472 static void vlv_get_cdclk(struct drm_i915_private *dev_priv,
473 struct intel_cdclk_config *cdclk_config)
474 {
475 u32 val;
476
477 vlv_iosf_sb_get(dev_priv,
478 BIT(VLV_IOSF_SB_CCK) | BIT(VLV_IOSF_SB_PUNIT));
479
480 cdclk_config->vco = vlv_get_hpll_vco(dev_priv);
481 cdclk_config->cdclk = vlv_get_cck_clock(dev_priv, "cdclk",
482 CCK_DISPLAY_CLOCK_CONTROL,
483 cdclk_config->vco);
484
485 val = vlv_punit_read(dev_priv, PUNIT_REG_DSPSSPM);
486
487 vlv_iosf_sb_put(dev_priv,
488 BIT(VLV_IOSF_SB_CCK) | BIT(VLV_IOSF_SB_PUNIT));
489
490 if (IS_VALLEYVIEW(dev_priv))
491 cdclk_config->voltage_level = (val & DSPFREQGUAR_MASK) >>
492 DSPFREQGUAR_SHIFT;
493 else
494 cdclk_config->voltage_level = (val & DSPFREQGUAR_MASK_CHV) >>
495 DSPFREQGUAR_SHIFT_CHV;
496 }
497
vlv_program_pfi_credits(struct drm_i915_private * dev_priv)498 static void vlv_program_pfi_credits(struct drm_i915_private *dev_priv)
499 {
500 unsigned int credits, default_credits;
501
502 if (IS_CHERRYVIEW(dev_priv))
503 default_credits = PFI_CREDIT(12);
504 else
505 default_credits = PFI_CREDIT(8);
506
507 if (dev_priv->cdclk.hw.cdclk >= dev_priv->czclk_freq) {
508 /* CHV suggested value is 31 or 63 */
509 if (IS_CHERRYVIEW(dev_priv))
510 credits = PFI_CREDIT_63;
511 else
512 credits = PFI_CREDIT(15);
513 } else {
514 credits = default_credits;
515 }
516
517 /*
518 * WA - write default credits before re-programming
519 * FIXME: should we also set the resend bit here?
520 */
521 intel_de_write(dev_priv, GCI_CONTROL,
522 VGA_FAST_MODE_DISABLE | default_credits);
523
524 intel_de_write(dev_priv, GCI_CONTROL,
525 VGA_FAST_MODE_DISABLE | credits | PFI_CREDIT_RESEND);
526
527 /*
528 * FIXME is this guaranteed to clear
529 * immediately or should we poll for it?
530 */
531 drm_WARN_ON(&dev_priv->drm,
532 intel_de_read(dev_priv, GCI_CONTROL) & PFI_CREDIT_RESEND);
533 }
534
vlv_set_cdclk(struct drm_i915_private * dev_priv,const struct intel_cdclk_config * cdclk_config,enum pipe pipe)535 static void vlv_set_cdclk(struct drm_i915_private *dev_priv,
536 const struct intel_cdclk_config *cdclk_config,
537 enum pipe pipe)
538 {
539 int cdclk = cdclk_config->cdclk;
540 u32 val, cmd = cdclk_config->voltage_level;
541 intel_wakeref_t wakeref;
542
543 switch (cdclk) {
544 case 400000:
545 case 333333:
546 case 320000:
547 case 266667:
548 case 200000:
549 break;
550 default:
551 MISSING_CASE(cdclk);
552 return;
553 }
554
555 /* There are cases where we can end up here with power domains
556 * off and a CDCLK frequency other than the minimum, like when
557 * issuing a modeset without actually changing any display after
558 * a system suspend. So grab the display core domain, which covers
559 * the HW blocks needed for the following programming.
560 */
561 wakeref = intel_display_power_get(dev_priv, POWER_DOMAIN_DISPLAY_CORE);
562
563 vlv_iosf_sb_get(dev_priv,
564 BIT(VLV_IOSF_SB_CCK) |
565 BIT(VLV_IOSF_SB_BUNIT) |
566 BIT(VLV_IOSF_SB_PUNIT));
567
568 val = vlv_punit_read(dev_priv, PUNIT_REG_DSPSSPM);
569 val &= ~DSPFREQGUAR_MASK;
570 val |= (cmd << DSPFREQGUAR_SHIFT);
571 vlv_punit_write(dev_priv, PUNIT_REG_DSPSSPM, val);
572 if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPSSPM) &
573 DSPFREQSTAT_MASK) == (cmd << DSPFREQSTAT_SHIFT),
574 50)) {
575 drm_err(&dev_priv->drm,
576 "timed out waiting for CDclk change\n");
577 }
578
579 if (cdclk == 400000) {
580 u32 divider;
581
582 divider = DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1,
583 cdclk) - 1;
584
585 /* adjust cdclk divider */
586 val = vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL);
587 val &= ~CCK_FREQUENCY_VALUES;
588 val |= divider;
589 vlv_cck_write(dev_priv, CCK_DISPLAY_CLOCK_CONTROL, val);
590
591 if (wait_for((vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL) &
592 CCK_FREQUENCY_STATUS) == (divider << CCK_FREQUENCY_STATUS_SHIFT),
593 50))
594 drm_err(&dev_priv->drm,
595 "timed out waiting for CDclk change\n");
596 }
597
598 /* adjust self-refresh exit latency value */
599 val = vlv_bunit_read(dev_priv, BUNIT_REG_BISOC);
600 val &= ~0x7f;
601
602 /*
603 * For high bandwidth configs, we set a higher latency in the bunit
604 * so that the core display fetch happens in time to avoid underruns.
605 */
606 if (cdclk == 400000)
607 val |= 4500 / 250; /* 4.5 usec */
608 else
609 val |= 3000 / 250; /* 3.0 usec */
610 vlv_bunit_write(dev_priv, BUNIT_REG_BISOC, val);
611
612 vlv_iosf_sb_put(dev_priv,
613 BIT(VLV_IOSF_SB_CCK) |
614 BIT(VLV_IOSF_SB_BUNIT) |
615 BIT(VLV_IOSF_SB_PUNIT));
616
617 intel_update_cdclk(dev_priv);
618
619 vlv_program_pfi_credits(dev_priv);
620
621 intel_display_power_put(dev_priv, POWER_DOMAIN_DISPLAY_CORE, wakeref);
622 }
623
chv_set_cdclk(struct drm_i915_private * dev_priv,const struct intel_cdclk_config * cdclk_config,enum pipe pipe)624 static void chv_set_cdclk(struct drm_i915_private *dev_priv,
625 const struct intel_cdclk_config *cdclk_config,
626 enum pipe pipe)
627 {
628 int cdclk = cdclk_config->cdclk;
629 u32 val, cmd = cdclk_config->voltage_level;
630 intel_wakeref_t wakeref;
631
632 switch (cdclk) {
633 case 333333:
634 case 320000:
635 case 266667:
636 case 200000:
637 break;
638 default:
639 MISSING_CASE(cdclk);
640 return;
641 }
642
643 /* There are cases where we can end up here with power domains
644 * off and a CDCLK frequency other than the minimum, like when
645 * issuing a modeset without actually changing any display after
646 * a system suspend. So grab the display core domain, which covers
647 * the HW blocks needed for the following programming.
648 */
649 wakeref = intel_display_power_get(dev_priv, POWER_DOMAIN_DISPLAY_CORE);
650
651 vlv_punit_get(dev_priv);
652 val = vlv_punit_read(dev_priv, PUNIT_REG_DSPSSPM);
653 val &= ~DSPFREQGUAR_MASK_CHV;
654 val |= (cmd << DSPFREQGUAR_SHIFT_CHV);
655 vlv_punit_write(dev_priv, PUNIT_REG_DSPSSPM, val);
656 if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPSSPM) &
657 DSPFREQSTAT_MASK_CHV) == (cmd << DSPFREQSTAT_SHIFT_CHV),
658 50)) {
659 drm_err(&dev_priv->drm,
660 "timed out waiting for CDclk change\n");
661 }
662
663 vlv_punit_put(dev_priv);
664
665 intel_update_cdclk(dev_priv);
666
667 vlv_program_pfi_credits(dev_priv);
668
669 intel_display_power_put(dev_priv, POWER_DOMAIN_DISPLAY_CORE, wakeref);
670 }
671
bdw_calc_cdclk(int min_cdclk)672 static int bdw_calc_cdclk(int min_cdclk)
673 {
674 if (min_cdclk > 540000)
675 return 675000;
676 else if (min_cdclk > 450000)
677 return 540000;
678 else if (min_cdclk > 337500)
679 return 450000;
680 else
681 return 337500;
682 }
683
bdw_calc_voltage_level(int cdclk)684 static u8 bdw_calc_voltage_level(int cdclk)
685 {
686 switch (cdclk) {
687 default:
688 case 337500:
689 return 2;
690 case 450000:
691 return 0;
692 case 540000:
693 return 1;
694 case 675000:
695 return 3;
696 }
697 }
698
bdw_get_cdclk(struct drm_i915_private * dev_priv,struct intel_cdclk_config * cdclk_config)699 static void bdw_get_cdclk(struct drm_i915_private *dev_priv,
700 struct intel_cdclk_config *cdclk_config)
701 {
702 u32 lcpll = intel_de_read(dev_priv, LCPLL_CTL);
703 u32 freq = lcpll & LCPLL_CLK_FREQ_MASK;
704
705 if (lcpll & LCPLL_CD_SOURCE_FCLK)
706 cdclk_config->cdclk = 800000;
707 else if (intel_de_read(dev_priv, FUSE_STRAP) & HSW_CDCLK_LIMIT)
708 cdclk_config->cdclk = 450000;
709 else if (freq == LCPLL_CLK_FREQ_450)
710 cdclk_config->cdclk = 450000;
711 else if (freq == LCPLL_CLK_FREQ_54O_BDW)
712 cdclk_config->cdclk = 540000;
713 else if (freq == LCPLL_CLK_FREQ_337_5_BDW)
714 cdclk_config->cdclk = 337500;
715 else
716 cdclk_config->cdclk = 675000;
717
718 /*
719 * Can't read this out :( Let's assume it's
720 * at least what the CDCLK frequency requires.
721 */
722 cdclk_config->voltage_level =
723 bdw_calc_voltage_level(cdclk_config->cdclk);
724 }
725
bdw_set_cdclk(struct drm_i915_private * dev_priv,const struct intel_cdclk_config * cdclk_config,enum pipe pipe)726 static void bdw_set_cdclk(struct drm_i915_private *dev_priv,
727 const struct intel_cdclk_config *cdclk_config,
728 enum pipe pipe)
729 {
730 int cdclk = cdclk_config->cdclk;
731 u32 val;
732 int ret;
733
734 if (drm_WARN(&dev_priv->drm,
735 (intel_de_read(dev_priv, LCPLL_CTL) &
736 (LCPLL_PLL_DISABLE | LCPLL_PLL_LOCK |
737 LCPLL_CD_CLOCK_DISABLE | LCPLL_ROOT_CD_CLOCK_DISABLE |
738 LCPLL_CD2X_CLOCK_DISABLE | LCPLL_POWER_DOWN_ALLOW |
739 LCPLL_CD_SOURCE_FCLK)) != LCPLL_PLL_LOCK,
740 "trying to change cdclk frequency with cdclk not enabled\n"))
741 return;
742
743 ret = sandybridge_pcode_write(dev_priv,
744 BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ, 0x0);
745 if (ret) {
746 drm_err(&dev_priv->drm,
747 "failed to inform pcode about cdclk change\n");
748 return;
749 }
750
751 val = intel_de_read(dev_priv, LCPLL_CTL);
752 val |= LCPLL_CD_SOURCE_FCLK;
753 intel_de_write(dev_priv, LCPLL_CTL, val);
754
755 /*
756 * According to the spec, it should be enough to poll for this 1 us.
757 * However, extensive testing shows that this can take longer.
758 */
759 if (wait_for_us(intel_de_read(dev_priv, LCPLL_CTL) &
760 LCPLL_CD_SOURCE_FCLK_DONE, 100))
761 drm_err(&dev_priv->drm, "Switching to FCLK failed\n");
762
763 val = intel_de_read(dev_priv, LCPLL_CTL);
764 val &= ~LCPLL_CLK_FREQ_MASK;
765
766 switch (cdclk) {
767 default:
768 MISSING_CASE(cdclk);
769 fallthrough;
770 case 337500:
771 val |= LCPLL_CLK_FREQ_337_5_BDW;
772 break;
773 case 450000:
774 val |= LCPLL_CLK_FREQ_450;
775 break;
776 case 540000:
777 val |= LCPLL_CLK_FREQ_54O_BDW;
778 break;
779 case 675000:
780 val |= LCPLL_CLK_FREQ_675_BDW;
781 break;
782 }
783
784 intel_de_write(dev_priv, LCPLL_CTL, val);
785
786 val = intel_de_read(dev_priv, LCPLL_CTL);
787 val &= ~LCPLL_CD_SOURCE_FCLK;
788 intel_de_write(dev_priv, LCPLL_CTL, val);
789
790 if (wait_for_us((intel_de_read(dev_priv, LCPLL_CTL) &
791 LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1))
792 drm_err(&dev_priv->drm, "Switching back to LCPLL failed\n");
793
794 sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ,
795 cdclk_config->voltage_level);
796
797 intel_de_write(dev_priv, CDCLK_FREQ,
798 DIV_ROUND_CLOSEST(cdclk, 1000) - 1);
799
800 intel_update_cdclk(dev_priv);
801 }
802
skl_calc_cdclk(int min_cdclk,int vco)803 static int skl_calc_cdclk(int min_cdclk, int vco)
804 {
805 if (vco == 8640000) {
806 if (min_cdclk > 540000)
807 return 617143;
808 else if (min_cdclk > 432000)
809 return 540000;
810 else if (min_cdclk > 308571)
811 return 432000;
812 else
813 return 308571;
814 } else {
815 if (min_cdclk > 540000)
816 return 675000;
817 else if (min_cdclk > 450000)
818 return 540000;
819 else if (min_cdclk > 337500)
820 return 450000;
821 else
822 return 337500;
823 }
824 }
825
skl_calc_voltage_level(int cdclk)826 static u8 skl_calc_voltage_level(int cdclk)
827 {
828 if (cdclk > 540000)
829 return 3;
830 else if (cdclk > 450000)
831 return 2;
832 else if (cdclk > 337500)
833 return 1;
834 else
835 return 0;
836 }
837
skl_dpll0_update(struct drm_i915_private * dev_priv,struct intel_cdclk_config * cdclk_config)838 static void skl_dpll0_update(struct drm_i915_private *dev_priv,
839 struct intel_cdclk_config *cdclk_config)
840 {
841 u32 val;
842
843 cdclk_config->ref = 24000;
844 cdclk_config->vco = 0;
845
846 val = intel_de_read(dev_priv, LCPLL1_CTL);
847 if ((val & LCPLL_PLL_ENABLE) == 0)
848 return;
849
850 if (drm_WARN_ON(&dev_priv->drm, (val & LCPLL_PLL_LOCK) == 0))
851 return;
852
853 val = intel_de_read(dev_priv, DPLL_CTRL1);
854
855 if (drm_WARN_ON(&dev_priv->drm,
856 (val & (DPLL_CTRL1_HDMI_MODE(SKL_DPLL0) |
857 DPLL_CTRL1_SSC(SKL_DPLL0) |
858 DPLL_CTRL1_OVERRIDE(SKL_DPLL0))) !=
859 DPLL_CTRL1_OVERRIDE(SKL_DPLL0)))
860 return;
861
862 switch (val & DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0)) {
863 case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810, SKL_DPLL0):
864 case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1350, SKL_DPLL0):
865 case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1620, SKL_DPLL0):
866 case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2700, SKL_DPLL0):
867 cdclk_config->vco = 8100000;
868 break;
869 case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1080, SKL_DPLL0):
870 case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2160, SKL_DPLL0):
871 cdclk_config->vco = 8640000;
872 break;
873 default:
874 MISSING_CASE(val & DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0));
875 break;
876 }
877 }
878
skl_get_cdclk(struct drm_i915_private * dev_priv,struct intel_cdclk_config * cdclk_config)879 static void skl_get_cdclk(struct drm_i915_private *dev_priv,
880 struct intel_cdclk_config *cdclk_config)
881 {
882 u32 cdctl;
883
884 skl_dpll0_update(dev_priv, cdclk_config);
885
886 cdclk_config->cdclk = cdclk_config->bypass = cdclk_config->ref;
887
888 if (cdclk_config->vco == 0)
889 goto out;
890
891 cdctl = intel_de_read(dev_priv, CDCLK_CTL);
892
893 if (cdclk_config->vco == 8640000) {
894 switch (cdctl & CDCLK_FREQ_SEL_MASK) {
895 case CDCLK_FREQ_450_432:
896 cdclk_config->cdclk = 432000;
897 break;
898 case CDCLK_FREQ_337_308:
899 cdclk_config->cdclk = 308571;
900 break;
901 case CDCLK_FREQ_540:
902 cdclk_config->cdclk = 540000;
903 break;
904 case CDCLK_FREQ_675_617:
905 cdclk_config->cdclk = 617143;
906 break;
907 default:
908 MISSING_CASE(cdctl & CDCLK_FREQ_SEL_MASK);
909 break;
910 }
911 } else {
912 switch (cdctl & CDCLK_FREQ_SEL_MASK) {
913 case CDCLK_FREQ_450_432:
914 cdclk_config->cdclk = 450000;
915 break;
916 case CDCLK_FREQ_337_308:
917 cdclk_config->cdclk = 337500;
918 break;
919 case CDCLK_FREQ_540:
920 cdclk_config->cdclk = 540000;
921 break;
922 case CDCLK_FREQ_675_617:
923 cdclk_config->cdclk = 675000;
924 break;
925 default:
926 MISSING_CASE(cdctl & CDCLK_FREQ_SEL_MASK);
927 break;
928 }
929 }
930
931 out:
932 /*
933 * Can't read this out :( Let's assume it's
934 * at least what the CDCLK frequency requires.
935 */
936 cdclk_config->voltage_level =
937 skl_calc_voltage_level(cdclk_config->cdclk);
938 }
939
940 /* convert from kHz to .1 fixpoint MHz with -1MHz offset */
skl_cdclk_decimal(int cdclk)941 static int skl_cdclk_decimal(int cdclk)
942 {
943 return DIV_ROUND_CLOSEST(cdclk - 1000, 500);
944 }
945
skl_set_preferred_cdclk_vco(struct drm_i915_private * dev_priv,int vco)946 static void skl_set_preferred_cdclk_vco(struct drm_i915_private *dev_priv,
947 int vco)
948 {
949 bool changed = dev_priv->skl_preferred_vco_freq != vco;
950
951 dev_priv->skl_preferred_vco_freq = vco;
952
953 if (changed)
954 intel_update_max_cdclk(dev_priv);
955 }
956
skl_dpll0_enable(struct drm_i915_private * dev_priv,int vco)957 static void skl_dpll0_enable(struct drm_i915_private *dev_priv, int vco)
958 {
959 u32 val;
960
961 drm_WARN_ON(&dev_priv->drm, vco != 8100000 && vco != 8640000);
962
963 /*
964 * We always enable DPLL0 with the lowest link rate possible, but still
965 * taking into account the VCO required to operate the eDP panel at the
966 * desired frequency. The usual DP link rates operate with a VCO of
967 * 8100 while the eDP 1.4 alternate link rates need a VCO of 8640.
968 * The modeset code is responsible for the selection of the exact link
969 * rate later on, with the constraint of choosing a frequency that
970 * works with vco.
971 */
972 val = intel_de_read(dev_priv, DPLL_CTRL1);
973
974 val &= ~(DPLL_CTRL1_HDMI_MODE(SKL_DPLL0) | DPLL_CTRL1_SSC(SKL_DPLL0) |
975 DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0));
976 val |= DPLL_CTRL1_OVERRIDE(SKL_DPLL0);
977 if (vco == 8640000)
978 val |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1080,
979 SKL_DPLL0);
980 else
981 val |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810,
982 SKL_DPLL0);
983
984 intel_de_write(dev_priv, DPLL_CTRL1, val);
985 intel_de_posting_read(dev_priv, DPLL_CTRL1);
986
987 intel_de_write(dev_priv, LCPLL1_CTL,
988 intel_de_read(dev_priv, LCPLL1_CTL) | LCPLL_PLL_ENABLE);
989
990 if (intel_de_wait_for_set(dev_priv, LCPLL1_CTL, LCPLL_PLL_LOCK, 5))
991 drm_err(&dev_priv->drm, "DPLL0 not locked\n");
992
993 dev_priv->cdclk.hw.vco = vco;
994
995 /* We'll want to keep using the current vco from now on. */
996 skl_set_preferred_cdclk_vco(dev_priv, vco);
997 }
998
skl_dpll0_disable(struct drm_i915_private * dev_priv)999 static void skl_dpll0_disable(struct drm_i915_private *dev_priv)
1000 {
1001 intel_de_write(dev_priv, LCPLL1_CTL,
1002 intel_de_read(dev_priv, LCPLL1_CTL) & ~LCPLL_PLL_ENABLE);
1003 if (intel_de_wait_for_clear(dev_priv, LCPLL1_CTL, LCPLL_PLL_LOCK, 1))
1004 drm_err(&dev_priv->drm, "Couldn't disable DPLL0\n");
1005
1006 dev_priv->cdclk.hw.vco = 0;
1007 }
1008
skl_set_cdclk(struct drm_i915_private * dev_priv,const struct intel_cdclk_config * cdclk_config,enum pipe pipe)1009 static void skl_set_cdclk(struct drm_i915_private *dev_priv,
1010 const struct intel_cdclk_config *cdclk_config,
1011 enum pipe pipe)
1012 {
1013 int cdclk = cdclk_config->cdclk;
1014 int vco = cdclk_config->vco;
1015 u32 freq_select, cdclk_ctl;
1016 int ret;
1017
1018 /*
1019 * Based on WA#1183 CDCLK rates 308 and 617MHz CDCLK rates are
1020 * unsupported on SKL. In theory this should never happen since only
1021 * the eDP1.4 2.16 and 4.32Gbps rates require it, but eDP1.4 is not
1022 * supported on SKL either, see the above WA. WARN whenever trying to
1023 * use the corresponding VCO freq as that always leads to using the
1024 * minimum 308MHz CDCLK.
1025 */
1026 drm_WARN_ON_ONCE(&dev_priv->drm,
1027 IS_SKYLAKE(dev_priv) && vco == 8640000);
1028
1029 ret = skl_pcode_request(dev_priv, SKL_PCODE_CDCLK_CONTROL,
1030 SKL_CDCLK_PREPARE_FOR_CHANGE,
1031 SKL_CDCLK_READY_FOR_CHANGE,
1032 SKL_CDCLK_READY_FOR_CHANGE, 3);
1033 if (ret) {
1034 drm_err(&dev_priv->drm,
1035 "Failed to inform PCU about cdclk change (%d)\n", ret);
1036 return;
1037 }
1038
1039 /* Choose frequency for this cdclk */
1040 switch (cdclk) {
1041 default:
1042 drm_WARN_ON(&dev_priv->drm,
1043 cdclk != dev_priv->cdclk.hw.bypass);
1044 drm_WARN_ON(&dev_priv->drm, vco != 0);
1045 fallthrough;
1046 case 308571:
1047 case 337500:
1048 freq_select = CDCLK_FREQ_337_308;
1049 break;
1050 case 450000:
1051 case 432000:
1052 freq_select = CDCLK_FREQ_450_432;
1053 break;
1054 case 540000:
1055 freq_select = CDCLK_FREQ_540;
1056 break;
1057 case 617143:
1058 case 675000:
1059 freq_select = CDCLK_FREQ_675_617;
1060 break;
1061 }
1062
1063 if (dev_priv->cdclk.hw.vco != 0 &&
1064 dev_priv->cdclk.hw.vco != vco)
1065 skl_dpll0_disable(dev_priv);
1066
1067 cdclk_ctl = intel_de_read(dev_priv, CDCLK_CTL);
1068
1069 if (dev_priv->cdclk.hw.vco != vco) {
1070 /* Wa Display #1183: skl,kbl,cfl */
1071 cdclk_ctl &= ~(CDCLK_FREQ_SEL_MASK | CDCLK_FREQ_DECIMAL_MASK);
1072 cdclk_ctl |= freq_select | skl_cdclk_decimal(cdclk);
1073 intel_de_write(dev_priv, CDCLK_CTL, cdclk_ctl);
1074 }
1075
1076 /* Wa Display #1183: skl,kbl,cfl */
1077 cdclk_ctl |= CDCLK_DIVMUX_CD_OVERRIDE;
1078 intel_de_write(dev_priv, CDCLK_CTL, cdclk_ctl);
1079 intel_de_posting_read(dev_priv, CDCLK_CTL);
1080
1081 if (dev_priv->cdclk.hw.vco != vco)
1082 skl_dpll0_enable(dev_priv, vco);
1083
1084 /* Wa Display #1183: skl,kbl,cfl */
1085 cdclk_ctl &= ~(CDCLK_FREQ_SEL_MASK | CDCLK_FREQ_DECIMAL_MASK);
1086 intel_de_write(dev_priv, CDCLK_CTL, cdclk_ctl);
1087
1088 cdclk_ctl |= freq_select | skl_cdclk_decimal(cdclk);
1089 intel_de_write(dev_priv, CDCLK_CTL, cdclk_ctl);
1090
1091 /* Wa Display #1183: skl,kbl,cfl */
1092 cdclk_ctl &= ~CDCLK_DIVMUX_CD_OVERRIDE;
1093 intel_de_write(dev_priv, CDCLK_CTL, cdclk_ctl);
1094 intel_de_posting_read(dev_priv, CDCLK_CTL);
1095
1096 /* inform PCU of the change */
1097 sandybridge_pcode_write(dev_priv, SKL_PCODE_CDCLK_CONTROL,
1098 cdclk_config->voltage_level);
1099
1100 intel_update_cdclk(dev_priv);
1101 }
1102
skl_sanitize_cdclk(struct drm_i915_private * dev_priv)1103 static void skl_sanitize_cdclk(struct drm_i915_private *dev_priv)
1104 {
1105 u32 cdctl, expected;
1106
1107 /*
1108 * check if the pre-os initialized the display
1109 * There is SWF18 scratchpad register defined which is set by the
1110 * pre-os which can be used by the OS drivers to check the status
1111 */
1112 if ((intel_de_read(dev_priv, SWF_ILK(0x18)) & 0x00FFFFFF) == 0)
1113 goto sanitize;
1114
1115 intel_update_cdclk(dev_priv);
1116 intel_dump_cdclk_config(&dev_priv->cdclk.hw, "Current CDCLK");
1117
1118 /* Is PLL enabled and locked ? */
1119 if (dev_priv->cdclk.hw.vco == 0 ||
1120 dev_priv->cdclk.hw.cdclk == dev_priv->cdclk.hw.bypass)
1121 goto sanitize;
1122
1123 /* DPLL okay; verify the cdclock
1124 *
1125 * Noticed in some instances that the freq selection is correct but
1126 * decimal part is programmed wrong from BIOS where pre-os does not
1127 * enable display. Verify the same as well.
1128 */
1129 cdctl = intel_de_read(dev_priv, CDCLK_CTL);
1130 expected = (cdctl & CDCLK_FREQ_SEL_MASK) |
1131 skl_cdclk_decimal(dev_priv->cdclk.hw.cdclk);
1132 if (cdctl == expected)
1133 /* All well; nothing to sanitize */
1134 return;
1135
1136 sanitize:
1137 drm_dbg_kms(&dev_priv->drm, "Sanitizing cdclk programmed by pre-os\n");
1138
1139 /* force cdclk programming */
1140 dev_priv->cdclk.hw.cdclk = 0;
1141 /* force full PLL disable + enable */
1142 dev_priv->cdclk.hw.vco = -1;
1143 }
1144
skl_cdclk_init_hw(struct drm_i915_private * dev_priv)1145 static void skl_cdclk_init_hw(struct drm_i915_private *dev_priv)
1146 {
1147 struct intel_cdclk_config cdclk_config;
1148
1149 skl_sanitize_cdclk(dev_priv);
1150
1151 if (dev_priv->cdclk.hw.cdclk != 0 &&
1152 dev_priv->cdclk.hw.vco != 0) {
1153 /*
1154 * Use the current vco as our initial
1155 * guess as to what the preferred vco is.
1156 */
1157 if (dev_priv->skl_preferred_vco_freq == 0)
1158 skl_set_preferred_cdclk_vco(dev_priv,
1159 dev_priv->cdclk.hw.vco);
1160 return;
1161 }
1162
1163 cdclk_config = dev_priv->cdclk.hw;
1164
1165 cdclk_config.vco = dev_priv->skl_preferred_vco_freq;
1166 if (cdclk_config.vco == 0)
1167 cdclk_config.vco = 8100000;
1168 cdclk_config.cdclk = skl_calc_cdclk(0, cdclk_config.vco);
1169 cdclk_config.voltage_level = skl_calc_voltage_level(cdclk_config.cdclk);
1170
1171 skl_set_cdclk(dev_priv, &cdclk_config, INVALID_PIPE);
1172 }
1173
skl_cdclk_uninit_hw(struct drm_i915_private * dev_priv)1174 static void skl_cdclk_uninit_hw(struct drm_i915_private *dev_priv)
1175 {
1176 struct intel_cdclk_config cdclk_config = dev_priv->cdclk.hw;
1177
1178 cdclk_config.cdclk = cdclk_config.bypass;
1179 cdclk_config.vco = 0;
1180 cdclk_config.voltage_level = skl_calc_voltage_level(cdclk_config.cdclk);
1181
1182 skl_set_cdclk(dev_priv, &cdclk_config, INVALID_PIPE);
1183 }
1184
1185 static const struct intel_cdclk_vals bxt_cdclk_table[] = {
1186 { .refclk = 19200, .cdclk = 144000, .divider = 8, .ratio = 60 },
1187 { .refclk = 19200, .cdclk = 288000, .divider = 4, .ratio = 60 },
1188 { .refclk = 19200, .cdclk = 384000, .divider = 3, .ratio = 60 },
1189 { .refclk = 19200, .cdclk = 576000, .divider = 2, .ratio = 60 },
1190 { .refclk = 19200, .cdclk = 624000, .divider = 2, .ratio = 65 },
1191 {}
1192 };
1193
1194 static const struct intel_cdclk_vals glk_cdclk_table[] = {
1195 { .refclk = 19200, .cdclk = 79200, .divider = 8, .ratio = 33 },
1196 { .refclk = 19200, .cdclk = 158400, .divider = 4, .ratio = 33 },
1197 { .refclk = 19200, .cdclk = 316800, .divider = 2, .ratio = 33 },
1198 {}
1199 };
1200
1201 static const struct intel_cdclk_vals cnl_cdclk_table[] = {
1202 { .refclk = 19200, .cdclk = 168000, .divider = 4, .ratio = 35 },
1203 { .refclk = 19200, .cdclk = 336000, .divider = 2, .ratio = 35 },
1204 { .refclk = 19200, .cdclk = 528000, .divider = 2, .ratio = 55 },
1205
1206 { .refclk = 24000, .cdclk = 168000, .divider = 4, .ratio = 28 },
1207 { .refclk = 24000, .cdclk = 336000, .divider = 2, .ratio = 28 },
1208 { .refclk = 24000, .cdclk = 528000, .divider = 2, .ratio = 44 },
1209 {}
1210 };
1211
1212 static const struct intel_cdclk_vals icl_cdclk_table[] = {
1213 { .refclk = 19200, .cdclk = 172800, .divider = 2, .ratio = 18 },
1214 { .refclk = 19200, .cdclk = 192000, .divider = 2, .ratio = 20 },
1215 { .refclk = 19200, .cdclk = 307200, .divider = 2, .ratio = 32 },
1216 { .refclk = 19200, .cdclk = 326400, .divider = 4, .ratio = 68 },
1217 { .refclk = 19200, .cdclk = 556800, .divider = 2, .ratio = 58 },
1218 { .refclk = 19200, .cdclk = 652800, .divider = 2, .ratio = 68 },
1219
1220 { .refclk = 24000, .cdclk = 180000, .divider = 2, .ratio = 15 },
1221 { .refclk = 24000, .cdclk = 192000, .divider = 2, .ratio = 16 },
1222 { .refclk = 24000, .cdclk = 312000, .divider = 2, .ratio = 26 },
1223 { .refclk = 24000, .cdclk = 324000, .divider = 4, .ratio = 54 },
1224 { .refclk = 24000, .cdclk = 552000, .divider = 2, .ratio = 46 },
1225 { .refclk = 24000, .cdclk = 648000, .divider = 2, .ratio = 54 },
1226
1227 { .refclk = 38400, .cdclk = 172800, .divider = 2, .ratio = 9 },
1228 { .refclk = 38400, .cdclk = 192000, .divider = 2, .ratio = 10 },
1229 { .refclk = 38400, .cdclk = 307200, .divider = 2, .ratio = 16 },
1230 { .refclk = 38400, .cdclk = 326400, .divider = 4, .ratio = 34 },
1231 { .refclk = 38400, .cdclk = 556800, .divider = 2, .ratio = 29 },
1232 { .refclk = 38400, .cdclk = 652800, .divider = 2, .ratio = 34 },
1233 {}
1234 };
1235
bxt_calc_cdclk(struct drm_i915_private * dev_priv,int min_cdclk)1236 static int bxt_calc_cdclk(struct drm_i915_private *dev_priv, int min_cdclk)
1237 {
1238 const struct intel_cdclk_vals *table = dev_priv->cdclk.table;
1239 int i;
1240
1241 for (i = 0; table[i].refclk; i++)
1242 if (table[i].refclk == dev_priv->cdclk.hw.ref &&
1243 table[i].cdclk >= min_cdclk)
1244 return table[i].cdclk;
1245
1246 drm_WARN(&dev_priv->drm, 1,
1247 "Cannot satisfy minimum cdclk %d with refclk %u\n",
1248 min_cdclk, dev_priv->cdclk.hw.ref);
1249 return 0;
1250 }
1251
bxt_calc_cdclk_pll_vco(struct drm_i915_private * dev_priv,int cdclk)1252 static int bxt_calc_cdclk_pll_vco(struct drm_i915_private *dev_priv, int cdclk)
1253 {
1254 const struct intel_cdclk_vals *table = dev_priv->cdclk.table;
1255 int i;
1256
1257 if (cdclk == dev_priv->cdclk.hw.bypass)
1258 return 0;
1259
1260 for (i = 0; table[i].refclk; i++)
1261 if (table[i].refclk == dev_priv->cdclk.hw.ref &&
1262 table[i].cdclk == cdclk)
1263 return dev_priv->cdclk.hw.ref * table[i].ratio;
1264
1265 drm_WARN(&dev_priv->drm, 1, "cdclk %d not valid for refclk %u\n",
1266 cdclk, dev_priv->cdclk.hw.ref);
1267 return 0;
1268 }
1269
bxt_calc_voltage_level(int cdclk)1270 static u8 bxt_calc_voltage_level(int cdclk)
1271 {
1272 return DIV_ROUND_UP(cdclk, 25000);
1273 }
1274
cnl_calc_voltage_level(int cdclk)1275 static u8 cnl_calc_voltage_level(int cdclk)
1276 {
1277 if (cdclk > 336000)
1278 return 2;
1279 else if (cdclk > 168000)
1280 return 1;
1281 else
1282 return 0;
1283 }
1284
icl_calc_voltage_level(int cdclk)1285 static u8 icl_calc_voltage_level(int cdclk)
1286 {
1287 if (cdclk > 556800)
1288 return 2;
1289 else if (cdclk > 312000)
1290 return 1;
1291 else
1292 return 0;
1293 }
1294
ehl_calc_voltage_level(int cdclk)1295 static u8 ehl_calc_voltage_level(int cdclk)
1296 {
1297 if (cdclk > 326400)
1298 return 3;
1299 else if (cdclk > 312000)
1300 return 2;
1301 else if (cdclk > 180000)
1302 return 1;
1303 else
1304 return 0;
1305 }
1306
tgl_calc_voltage_level(int cdclk)1307 static u8 tgl_calc_voltage_level(int cdclk)
1308 {
1309 if (cdclk > 556800)
1310 return 3;
1311 else if (cdclk > 326400)
1312 return 2;
1313 else if (cdclk > 312000)
1314 return 1;
1315 else
1316 return 0;
1317 }
1318
cnl_readout_refclk(struct drm_i915_private * dev_priv,struct intel_cdclk_config * cdclk_config)1319 static void cnl_readout_refclk(struct drm_i915_private *dev_priv,
1320 struct intel_cdclk_config *cdclk_config)
1321 {
1322 if (intel_de_read(dev_priv, SKL_DSSM) & CNL_DSSM_CDCLK_PLL_REFCLK_24MHz)
1323 cdclk_config->ref = 24000;
1324 else
1325 cdclk_config->ref = 19200;
1326 }
1327
icl_readout_refclk(struct drm_i915_private * dev_priv,struct intel_cdclk_config * cdclk_config)1328 static void icl_readout_refclk(struct drm_i915_private *dev_priv,
1329 struct intel_cdclk_config *cdclk_config)
1330 {
1331 u32 dssm = intel_de_read(dev_priv, SKL_DSSM) & ICL_DSSM_CDCLK_PLL_REFCLK_MASK;
1332
1333 switch (dssm) {
1334 default:
1335 MISSING_CASE(dssm);
1336 fallthrough;
1337 case ICL_DSSM_CDCLK_PLL_REFCLK_24MHz:
1338 cdclk_config->ref = 24000;
1339 break;
1340 case ICL_DSSM_CDCLK_PLL_REFCLK_19_2MHz:
1341 cdclk_config->ref = 19200;
1342 break;
1343 case ICL_DSSM_CDCLK_PLL_REFCLK_38_4MHz:
1344 cdclk_config->ref = 38400;
1345 break;
1346 }
1347 }
1348
bxt_de_pll_readout(struct drm_i915_private * dev_priv,struct intel_cdclk_config * cdclk_config)1349 static void bxt_de_pll_readout(struct drm_i915_private *dev_priv,
1350 struct intel_cdclk_config *cdclk_config)
1351 {
1352 u32 val, ratio;
1353
1354 if (INTEL_GEN(dev_priv) >= 11)
1355 icl_readout_refclk(dev_priv, cdclk_config);
1356 else if (IS_CANNONLAKE(dev_priv))
1357 cnl_readout_refclk(dev_priv, cdclk_config);
1358 else
1359 cdclk_config->ref = 19200;
1360
1361 val = intel_de_read(dev_priv, BXT_DE_PLL_ENABLE);
1362 if ((val & BXT_DE_PLL_PLL_ENABLE) == 0 ||
1363 (val & BXT_DE_PLL_LOCK) == 0) {
1364 /*
1365 * CDCLK PLL is disabled, the VCO/ratio doesn't matter, but
1366 * setting it to zero is a way to signal that.
1367 */
1368 cdclk_config->vco = 0;
1369 return;
1370 }
1371
1372 /*
1373 * CNL+ have the ratio directly in the PLL enable register, gen9lp had
1374 * it in a separate PLL control register.
1375 */
1376 if (INTEL_GEN(dev_priv) >= 10)
1377 ratio = val & CNL_CDCLK_PLL_RATIO_MASK;
1378 else
1379 ratio = intel_de_read(dev_priv, BXT_DE_PLL_CTL) & BXT_DE_PLL_RATIO_MASK;
1380
1381 cdclk_config->vco = ratio * cdclk_config->ref;
1382 }
1383
bxt_get_cdclk(struct drm_i915_private * dev_priv,struct intel_cdclk_config * cdclk_config)1384 static void bxt_get_cdclk(struct drm_i915_private *dev_priv,
1385 struct intel_cdclk_config *cdclk_config)
1386 {
1387 u32 divider;
1388 int div;
1389
1390 bxt_de_pll_readout(dev_priv, cdclk_config);
1391
1392 if (INTEL_GEN(dev_priv) >= 12)
1393 cdclk_config->bypass = cdclk_config->ref / 2;
1394 else if (INTEL_GEN(dev_priv) >= 11)
1395 cdclk_config->bypass = 50000;
1396 else
1397 cdclk_config->bypass = cdclk_config->ref;
1398
1399 if (cdclk_config->vco == 0) {
1400 cdclk_config->cdclk = cdclk_config->bypass;
1401 goto out;
1402 }
1403
1404 divider = intel_de_read(dev_priv, CDCLK_CTL) & BXT_CDCLK_CD2X_DIV_SEL_MASK;
1405
1406 switch (divider) {
1407 case BXT_CDCLK_CD2X_DIV_SEL_1:
1408 div = 2;
1409 break;
1410 case BXT_CDCLK_CD2X_DIV_SEL_1_5:
1411 drm_WARN(&dev_priv->drm,
1412 IS_GEMINILAKE(dev_priv) || INTEL_GEN(dev_priv) >= 10,
1413 "Unsupported divider\n");
1414 div = 3;
1415 break;
1416 case BXT_CDCLK_CD2X_DIV_SEL_2:
1417 div = 4;
1418 break;
1419 case BXT_CDCLK_CD2X_DIV_SEL_4:
1420 drm_WARN(&dev_priv->drm, INTEL_GEN(dev_priv) >= 10,
1421 "Unsupported divider\n");
1422 div = 8;
1423 break;
1424 default:
1425 MISSING_CASE(divider);
1426 return;
1427 }
1428
1429 cdclk_config->cdclk = DIV_ROUND_CLOSEST(cdclk_config->vco, div);
1430
1431 out:
1432 /*
1433 * Can't read this out :( Let's assume it's
1434 * at least what the CDCLK frequency requires.
1435 */
1436 cdclk_config->voltage_level =
1437 dev_priv->display.calc_voltage_level(cdclk_config->cdclk);
1438 }
1439
bxt_de_pll_disable(struct drm_i915_private * dev_priv)1440 static void bxt_de_pll_disable(struct drm_i915_private *dev_priv)
1441 {
1442 intel_de_write(dev_priv, BXT_DE_PLL_ENABLE, 0);
1443
1444 /* Timeout 200us */
1445 if (intel_de_wait_for_clear(dev_priv,
1446 BXT_DE_PLL_ENABLE, BXT_DE_PLL_LOCK, 1))
1447 drm_err(&dev_priv->drm, "timeout waiting for DE PLL unlock\n");
1448
1449 dev_priv->cdclk.hw.vco = 0;
1450 }
1451
bxt_de_pll_enable(struct drm_i915_private * dev_priv,int vco)1452 static void bxt_de_pll_enable(struct drm_i915_private *dev_priv, int vco)
1453 {
1454 int ratio = DIV_ROUND_CLOSEST(vco, dev_priv->cdclk.hw.ref);
1455 u32 val;
1456
1457 val = intel_de_read(dev_priv, BXT_DE_PLL_CTL);
1458 val &= ~BXT_DE_PLL_RATIO_MASK;
1459 val |= BXT_DE_PLL_RATIO(ratio);
1460 intel_de_write(dev_priv, BXT_DE_PLL_CTL, val);
1461
1462 intel_de_write(dev_priv, BXT_DE_PLL_ENABLE, BXT_DE_PLL_PLL_ENABLE);
1463
1464 /* Timeout 200us */
1465 if (intel_de_wait_for_set(dev_priv,
1466 BXT_DE_PLL_ENABLE, BXT_DE_PLL_LOCK, 1))
1467 drm_err(&dev_priv->drm, "timeout waiting for DE PLL lock\n");
1468
1469 dev_priv->cdclk.hw.vco = vco;
1470 }
1471
cnl_cdclk_pll_disable(struct drm_i915_private * dev_priv)1472 static void cnl_cdclk_pll_disable(struct drm_i915_private *dev_priv)
1473 {
1474 u32 val;
1475
1476 val = intel_de_read(dev_priv, BXT_DE_PLL_ENABLE);
1477 val &= ~BXT_DE_PLL_PLL_ENABLE;
1478 intel_de_write(dev_priv, BXT_DE_PLL_ENABLE, val);
1479
1480 /* Timeout 200us */
1481 if (wait_for((intel_de_read(dev_priv, BXT_DE_PLL_ENABLE) & BXT_DE_PLL_LOCK) == 0, 1))
1482 drm_err(&dev_priv->drm,
1483 "timeout waiting for CDCLK PLL unlock\n");
1484
1485 dev_priv->cdclk.hw.vco = 0;
1486 }
1487
cnl_cdclk_pll_enable(struct drm_i915_private * dev_priv,int vco)1488 static void cnl_cdclk_pll_enable(struct drm_i915_private *dev_priv, int vco)
1489 {
1490 int ratio = DIV_ROUND_CLOSEST(vco, dev_priv->cdclk.hw.ref);
1491 u32 val;
1492
1493 val = CNL_CDCLK_PLL_RATIO(ratio);
1494 intel_de_write(dev_priv, BXT_DE_PLL_ENABLE, val);
1495
1496 val |= BXT_DE_PLL_PLL_ENABLE;
1497 intel_de_write(dev_priv, BXT_DE_PLL_ENABLE, val);
1498
1499 /* Timeout 200us */
1500 if (wait_for((intel_de_read(dev_priv, BXT_DE_PLL_ENABLE) & BXT_DE_PLL_LOCK) != 0, 1))
1501 drm_err(&dev_priv->drm,
1502 "timeout waiting for CDCLK PLL lock\n");
1503
1504 dev_priv->cdclk.hw.vco = vco;
1505 }
1506
bxt_cdclk_cd2x_pipe(struct drm_i915_private * dev_priv,enum pipe pipe)1507 static u32 bxt_cdclk_cd2x_pipe(struct drm_i915_private *dev_priv, enum pipe pipe)
1508 {
1509 if (INTEL_GEN(dev_priv) >= 12) {
1510 if (pipe == INVALID_PIPE)
1511 return TGL_CDCLK_CD2X_PIPE_NONE;
1512 else
1513 return TGL_CDCLK_CD2X_PIPE(pipe);
1514 } else if (INTEL_GEN(dev_priv) >= 11) {
1515 if (pipe == INVALID_PIPE)
1516 return ICL_CDCLK_CD2X_PIPE_NONE;
1517 else
1518 return ICL_CDCLK_CD2X_PIPE(pipe);
1519 } else {
1520 if (pipe == INVALID_PIPE)
1521 return BXT_CDCLK_CD2X_PIPE_NONE;
1522 else
1523 return BXT_CDCLK_CD2X_PIPE(pipe);
1524 }
1525 }
1526
bxt_set_cdclk(struct drm_i915_private * dev_priv,const struct intel_cdclk_config * cdclk_config,enum pipe pipe)1527 static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
1528 const struct intel_cdclk_config *cdclk_config,
1529 enum pipe pipe)
1530 {
1531 int cdclk = cdclk_config->cdclk;
1532 int vco = cdclk_config->vco;
1533 u32 val, divider;
1534 int ret;
1535
1536 /* Inform power controller of upcoming frequency change. */
1537 if (INTEL_GEN(dev_priv) >= 10)
1538 ret = skl_pcode_request(dev_priv, SKL_PCODE_CDCLK_CONTROL,
1539 SKL_CDCLK_PREPARE_FOR_CHANGE,
1540 SKL_CDCLK_READY_FOR_CHANGE,
1541 SKL_CDCLK_READY_FOR_CHANGE, 3);
1542 else
1543 /*
1544 * BSpec requires us to wait up to 150usec, but that leads to
1545 * timeouts; the 2ms used here is based on experiment.
1546 */
1547 ret = sandybridge_pcode_write_timeout(dev_priv,
1548 HSW_PCODE_DE_WRITE_FREQ_REQ,
1549 0x80000000, 150, 2);
1550
1551 if (ret) {
1552 drm_err(&dev_priv->drm,
1553 "Failed to inform PCU about cdclk change (err %d, freq %d)\n",
1554 ret, cdclk);
1555 return;
1556 }
1557
1558 /* cdclk = vco / 2 / div{1,1.5,2,4} */
1559 switch (DIV_ROUND_CLOSEST(vco, cdclk)) {
1560 default:
1561 drm_WARN_ON(&dev_priv->drm,
1562 cdclk != dev_priv->cdclk.hw.bypass);
1563 drm_WARN_ON(&dev_priv->drm, vco != 0);
1564 fallthrough;
1565 case 2:
1566 divider = BXT_CDCLK_CD2X_DIV_SEL_1;
1567 break;
1568 case 3:
1569 drm_WARN(&dev_priv->drm,
1570 IS_GEMINILAKE(dev_priv) || INTEL_GEN(dev_priv) >= 10,
1571 "Unsupported divider\n");
1572 divider = BXT_CDCLK_CD2X_DIV_SEL_1_5;
1573 break;
1574 case 4:
1575 divider = BXT_CDCLK_CD2X_DIV_SEL_2;
1576 break;
1577 case 8:
1578 drm_WARN(&dev_priv->drm, INTEL_GEN(dev_priv) >= 10,
1579 "Unsupported divider\n");
1580 divider = BXT_CDCLK_CD2X_DIV_SEL_4;
1581 break;
1582 }
1583
1584 if (INTEL_GEN(dev_priv) >= 10) {
1585 if (dev_priv->cdclk.hw.vco != 0 &&
1586 dev_priv->cdclk.hw.vco != vco)
1587 cnl_cdclk_pll_disable(dev_priv);
1588
1589 if (dev_priv->cdclk.hw.vco != vco)
1590 cnl_cdclk_pll_enable(dev_priv, vco);
1591
1592 } else {
1593 if (dev_priv->cdclk.hw.vco != 0 &&
1594 dev_priv->cdclk.hw.vco != vco)
1595 bxt_de_pll_disable(dev_priv);
1596
1597 if (dev_priv->cdclk.hw.vco != vco)
1598 bxt_de_pll_enable(dev_priv, vco);
1599 }
1600
1601 val = divider | skl_cdclk_decimal(cdclk) |
1602 bxt_cdclk_cd2x_pipe(dev_priv, pipe);
1603
1604 /*
1605 * Disable SSA Precharge when CD clock frequency < 500 MHz,
1606 * enable otherwise.
1607 */
1608 if (IS_GEN9_LP(dev_priv) && cdclk >= 500000)
1609 val |= BXT_CDCLK_SSA_PRECHARGE_ENABLE;
1610 intel_de_write(dev_priv, CDCLK_CTL, val);
1611
1612 if (pipe != INVALID_PIPE)
1613 intel_wait_for_vblank(dev_priv, pipe);
1614
1615 if (INTEL_GEN(dev_priv) >= 10) {
1616 ret = sandybridge_pcode_write(dev_priv, SKL_PCODE_CDCLK_CONTROL,
1617 cdclk_config->voltage_level);
1618 } else {
1619 /*
1620 * The timeout isn't specified, the 2ms used here is based on
1621 * experiment.
1622 * FIXME: Waiting for the request completion could be delayed
1623 * until the next PCODE request based on BSpec.
1624 */
1625 ret = sandybridge_pcode_write_timeout(dev_priv,
1626 HSW_PCODE_DE_WRITE_FREQ_REQ,
1627 cdclk_config->voltage_level,
1628 150, 2);
1629 }
1630
1631 if (ret) {
1632 drm_err(&dev_priv->drm,
1633 "PCode CDCLK freq set failed, (err %d, freq %d)\n",
1634 ret, cdclk);
1635 return;
1636 }
1637
1638 intel_update_cdclk(dev_priv);
1639
1640 if (INTEL_GEN(dev_priv) >= 10)
1641 /*
1642 * Can't read out the voltage level :(
1643 * Let's just assume everything is as expected.
1644 */
1645 dev_priv->cdclk.hw.voltage_level = cdclk_config->voltage_level;
1646 }
1647
bxt_sanitize_cdclk(struct drm_i915_private * dev_priv)1648 static void bxt_sanitize_cdclk(struct drm_i915_private *dev_priv)
1649 {
1650 u32 cdctl, expected;
1651 int cdclk, vco;
1652
1653 intel_update_cdclk(dev_priv);
1654 intel_dump_cdclk_config(&dev_priv->cdclk.hw, "Current CDCLK");
1655
1656 if (dev_priv->cdclk.hw.vco == 0 ||
1657 dev_priv->cdclk.hw.cdclk == dev_priv->cdclk.hw.bypass)
1658 goto sanitize;
1659
1660 /* DPLL okay; verify the cdclock
1661 *
1662 * Some BIOS versions leave an incorrect decimal frequency value and
1663 * set reserved MBZ bits in CDCLK_CTL at least during exiting from S4,
1664 * so sanitize this register.
1665 */
1666 cdctl = intel_de_read(dev_priv, CDCLK_CTL);
1667 /*
1668 * Let's ignore the pipe field, since BIOS could have configured the
1669 * dividers both synching to an active pipe, or asynchronously
1670 * (PIPE_NONE).
1671 */
1672 cdctl &= ~bxt_cdclk_cd2x_pipe(dev_priv, INVALID_PIPE);
1673
1674 /* Make sure this is a legal cdclk value for the platform */
1675 cdclk = bxt_calc_cdclk(dev_priv, dev_priv->cdclk.hw.cdclk);
1676 if (cdclk != dev_priv->cdclk.hw.cdclk)
1677 goto sanitize;
1678
1679 /* Make sure the VCO is correct for the cdclk */
1680 vco = bxt_calc_cdclk_pll_vco(dev_priv, cdclk);
1681 if (vco != dev_priv->cdclk.hw.vco)
1682 goto sanitize;
1683
1684 expected = skl_cdclk_decimal(cdclk);
1685
1686 /* Figure out what CD2X divider we should be using for this cdclk */
1687 switch (DIV_ROUND_CLOSEST(dev_priv->cdclk.hw.vco,
1688 dev_priv->cdclk.hw.cdclk)) {
1689 case 2:
1690 expected |= BXT_CDCLK_CD2X_DIV_SEL_1;
1691 break;
1692 case 3:
1693 expected |= BXT_CDCLK_CD2X_DIV_SEL_1_5;
1694 break;
1695 case 4:
1696 expected |= BXT_CDCLK_CD2X_DIV_SEL_2;
1697 break;
1698 case 8:
1699 expected |= BXT_CDCLK_CD2X_DIV_SEL_4;
1700 break;
1701 default:
1702 goto sanitize;
1703 }
1704
1705 /*
1706 * Disable SSA Precharge when CD clock frequency < 500 MHz,
1707 * enable otherwise.
1708 */
1709 if (IS_GEN9_LP(dev_priv) && dev_priv->cdclk.hw.cdclk >= 500000)
1710 expected |= BXT_CDCLK_SSA_PRECHARGE_ENABLE;
1711
1712 if (cdctl == expected)
1713 /* All well; nothing to sanitize */
1714 return;
1715
1716 sanitize:
1717 drm_dbg_kms(&dev_priv->drm, "Sanitizing cdclk programmed by pre-os\n");
1718
1719 /* force cdclk programming */
1720 dev_priv->cdclk.hw.cdclk = 0;
1721
1722 /* force full PLL disable + enable */
1723 dev_priv->cdclk.hw.vco = -1;
1724 }
1725
bxt_cdclk_init_hw(struct drm_i915_private * dev_priv)1726 static void bxt_cdclk_init_hw(struct drm_i915_private *dev_priv)
1727 {
1728 struct intel_cdclk_config cdclk_config;
1729
1730 bxt_sanitize_cdclk(dev_priv);
1731
1732 if (dev_priv->cdclk.hw.cdclk != 0 &&
1733 dev_priv->cdclk.hw.vco != 0)
1734 return;
1735
1736 cdclk_config = dev_priv->cdclk.hw;
1737
1738 /*
1739 * FIXME:
1740 * - The initial CDCLK needs to be read from VBT.
1741 * Need to make this change after VBT has changes for BXT.
1742 */
1743 cdclk_config.cdclk = bxt_calc_cdclk(dev_priv, 0);
1744 cdclk_config.vco = bxt_calc_cdclk_pll_vco(dev_priv, cdclk_config.cdclk);
1745 cdclk_config.voltage_level =
1746 dev_priv->display.calc_voltage_level(cdclk_config.cdclk);
1747
1748 bxt_set_cdclk(dev_priv, &cdclk_config, INVALID_PIPE);
1749 }
1750
bxt_cdclk_uninit_hw(struct drm_i915_private * dev_priv)1751 static void bxt_cdclk_uninit_hw(struct drm_i915_private *dev_priv)
1752 {
1753 struct intel_cdclk_config cdclk_config = dev_priv->cdclk.hw;
1754
1755 cdclk_config.cdclk = cdclk_config.bypass;
1756 cdclk_config.vco = 0;
1757 cdclk_config.voltage_level =
1758 dev_priv->display.calc_voltage_level(cdclk_config.cdclk);
1759
1760 bxt_set_cdclk(dev_priv, &cdclk_config, INVALID_PIPE);
1761 }
1762
1763 /**
1764 * intel_cdclk_init_hw - Initialize CDCLK hardware
1765 * @i915: i915 device
1766 *
1767 * Initialize CDCLK. This consists mainly of initializing dev_priv->cdclk.hw and
1768 * sanitizing the state of the hardware if needed. This is generally done only
1769 * during the display core initialization sequence, after which the DMC will
1770 * take care of turning CDCLK off/on as needed.
1771 */
intel_cdclk_init_hw(struct drm_i915_private * i915)1772 void intel_cdclk_init_hw(struct drm_i915_private *i915)
1773 {
1774 if (IS_GEN9_LP(i915) || INTEL_GEN(i915) >= 10)
1775 bxt_cdclk_init_hw(i915);
1776 else if (IS_GEN9_BC(i915))
1777 skl_cdclk_init_hw(i915);
1778 }
1779
1780 /**
1781 * intel_cdclk_uninit_hw - Uninitialize CDCLK hardware
1782 * @i915: i915 device
1783 *
1784 * Uninitialize CDCLK. This is done only during the display core
1785 * uninitialization sequence.
1786 */
intel_cdclk_uninit_hw(struct drm_i915_private * i915)1787 void intel_cdclk_uninit_hw(struct drm_i915_private *i915)
1788 {
1789 if (INTEL_GEN(i915) >= 10 || IS_GEN9_LP(i915))
1790 bxt_cdclk_uninit_hw(i915);
1791 else if (IS_GEN9_BC(i915))
1792 skl_cdclk_uninit_hw(i915);
1793 }
1794
1795 /**
1796 * intel_cdclk_needs_modeset - Determine if changong between the CDCLK
1797 * configurations requires a modeset on all pipes
1798 * @a: first CDCLK configuration
1799 * @b: second CDCLK configuration
1800 *
1801 * Returns:
1802 * True if changing between the two CDCLK configurations
1803 * requires all pipes to be off, false if not.
1804 */
intel_cdclk_needs_modeset(const struct intel_cdclk_config * a,const struct intel_cdclk_config * b)1805 bool intel_cdclk_needs_modeset(const struct intel_cdclk_config *a,
1806 const struct intel_cdclk_config *b)
1807 {
1808 return a->cdclk != b->cdclk ||
1809 a->vco != b->vco ||
1810 a->ref != b->ref;
1811 }
1812
1813 /**
1814 * intel_cdclk_can_cd2x_update - Determine if changing between the two CDCLK
1815 * configurations requires only a cd2x divider update
1816 * @dev_priv: i915 device
1817 * @a: first CDCLK configuration
1818 * @b: second CDCLK configuration
1819 *
1820 * Returns:
1821 * True if changing between the two CDCLK configurations
1822 * can be done with just a cd2x divider update, false if not.
1823 */
intel_cdclk_can_cd2x_update(struct drm_i915_private * dev_priv,const struct intel_cdclk_config * a,const struct intel_cdclk_config * b)1824 static bool intel_cdclk_can_cd2x_update(struct drm_i915_private *dev_priv,
1825 const struct intel_cdclk_config *a,
1826 const struct intel_cdclk_config *b)
1827 {
1828 /* Older hw doesn't have the capability */
1829 if (INTEL_GEN(dev_priv) < 10 && !IS_GEN9_LP(dev_priv))
1830 return false;
1831
1832 return a->cdclk != b->cdclk &&
1833 a->vco == b->vco &&
1834 a->ref == b->ref;
1835 }
1836
1837 /**
1838 * intel_cdclk_changed - Determine if two CDCLK configurations are different
1839 * @a: first CDCLK configuration
1840 * @b: second CDCLK configuration
1841 *
1842 * Returns:
1843 * True if the CDCLK configurations don't match, false if they do.
1844 */
intel_cdclk_changed(const struct intel_cdclk_config * a,const struct intel_cdclk_config * b)1845 static bool intel_cdclk_changed(const struct intel_cdclk_config *a,
1846 const struct intel_cdclk_config *b)
1847 {
1848 return intel_cdclk_needs_modeset(a, b) ||
1849 a->voltage_level != b->voltage_level;
1850 }
1851
intel_dump_cdclk_config(const struct intel_cdclk_config * cdclk_config,const char * context)1852 void intel_dump_cdclk_config(const struct intel_cdclk_config *cdclk_config,
1853 const char *context)
1854 {
1855 DRM_DEBUG_DRIVER("%s %d kHz, VCO %d kHz, ref %d kHz, bypass %d kHz, voltage level %d\n",
1856 context, cdclk_config->cdclk, cdclk_config->vco,
1857 cdclk_config->ref, cdclk_config->bypass,
1858 cdclk_config->voltage_level);
1859 }
1860
1861 /**
1862 * intel_set_cdclk - Push the CDCLK configuration to the hardware
1863 * @dev_priv: i915 device
1864 * @cdclk_config: new CDCLK configuration
1865 * @pipe: pipe with which to synchronize the update
1866 *
1867 * Program the hardware based on the passed in CDCLK state,
1868 * if necessary.
1869 */
intel_set_cdclk(struct drm_i915_private * dev_priv,const struct intel_cdclk_config * cdclk_config,enum pipe pipe)1870 static void intel_set_cdclk(struct drm_i915_private *dev_priv,
1871 const struct intel_cdclk_config *cdclk_config,
1872 enum pipe pipe)
1873 {
1874 struct intel_encoder *encoder;
1875
1876 if (!intel_cdclk_changed(&dev_priv->cdclk.hw, cdclk_config))
1877 return;
1878
1879 if (drm_WARN_ON_ONCE(&dev_priv->drm, !dev_priv->display.set_cdclk))
1880 return;
1881
1882 intel_dump_cdclk_config(cdclk_config, "Changing CDCLK to");
1883
1884 /*
1885 * Lock aux/gmbus while we change cdclk in case those
1886 * functions use cdclk. Not all platforms/ports do,
1887 * but we'll lock them all for simplicity.
1888 */
1889 mutex_lock(&dev_priv->gmbus_mutex);
1890 for_each_intel_dp(&dev_priv->drm, encoder) {
1891 struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
1892
1893 mutex_lock_nest_lock(&intel_dp->aux.hw_mutex,
1894 &dev_priv->gmbus_mutex);
1895 }
1896
1897 dev_priv->display.set_cdclk(dev_priv, cdclk_config, pipe);
1898
1899 for_each_intel_dp(&dev_priv->drm, encoder) {
1900 struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
1901
1902 mutex_unlock(&intel_dp->aux.hw_mutex);
1903 }
1904 mutex_unlock(&dev_priv->gmbus_mutex);
1905
1906 if (drm_WARN(&dev_priv->drm,
1907 intel_cdclk_changed(&dev_priv->cdclk.hw, cdclk_config),
1908 "cdclk state doesn't match!\n")) {
1909 intel_dump_cdclk_config(&dev_priv->cdclk.hw, "[hw state]");
1910 intel_dump_cdclk_config(cdclk_config, "[sw state]");
1911 }
1912 }
1913
1914 /**
1915 * intel_set_cdclk_pre_plane_update - Push the CDCLK state to the hardware
1916 * @state: intel atomic state
1917 *
1918 * Program the hardware before updating the HW plane state based on the
1919 * new CDCLK state, if necessary.
1920 */
1921 void
intel_set_cdclk_pre_plane_update(struct intel_atomic_state * state)1922 intel_set_cdclk_pre_plane_update(struct intel_atomic_state *state)
1923 {
1924 struct drm_i915_private *dev_priv = to_i915(state->base.dev);
1925 const struct intel_cdclk_state *old_cdclk_state =
1926 intel_atomic_get_old_cdclk_state(state);
1927 const struct intel_cdclk_state *new_cdclk_state =
1928 intel_atomic_get_new_cdclk_state(state);
1929 enum pipe pipe = new_cdclk_state->pipe;
1930
1931 if (!intel_cdclk_changed(&old_cdclk_state->actual,
1932 &new_cdclk_state->actual))
1933 return;
1934
1935 if (pipe == INVALID_PIPE ||
1936 old_cdclk_state->actual.cdclk <= new_cdclk_state->actual.cdclk) {
1937 drm_WARN_ON(&dev_priv->drm, !new_cdclk_state->base.changed);
1938
1939 intel_set_cdclk(dev_priv, &new_cdclk_state->actual, pipe);
1940 }
1941 }
1942
1943 /**
1944 * intel_set_cdclk_post_plane_update - Push the CDCLK state to the hardware
1945 * @state: intel atomic state
1946 *
1947 * Program the hardware after updating the HW plane state based on the
1948 * new CDCLK state, if necessary.
1949 */
1950 void
intel_set_cdclk_post_plane_update(struct intel_atomic_state * state)1951 intel_set_cdclk_post_plane_update(struct intel_atomic_state *state)
1952 {
1953 struct drm_i915_private *dev_priv = to_i915(state->base.dev);
1954 const struct intel_cdclk_state *old_cdclk_state =
1955 intel_atomic_get_old_cdclk_state(state);
1956 const struct intel_cdclk_state *new_cdclk_state =
1957 intel_atomic_get_new_cdclk_state(state);
1958 enum pipe pipe = new_cdclk_state->pipe;
1959
1960 if (!intel_cdclk_changed(&old_cdclk_state->actual,
1961 &new_cdclk_state->actual))
1962 return;
1963
1964 if (pipe != INVALID_PIPE &&
1965 old_cdclk_state->actual.cdclk > new_cdclk_state->actual.cdclk) {
1966 drm_WARN_ON(&dev_priv->drm, !new_cdclk_state->base.changed);
1967
1968 intel_set_cdclk(dev_priv, &new_cdclk_state->actual, pipe);
1969 }
1970 }
1971
intel_pixel_rate_to_cdclk(const struct intel_crtc_state * crtc_state)1972 static int intel_pixel_rate_to_cdclk(const struct intel_crtc_state *crtc_state)
1973 {
1974 struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev);
1975 int pixel_rate = crtc_state->pixel_rate;
1976
1977 if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv))
1978 return DIV_ROUND_UP(pixel_rate, 2);
1979 else if (IS_GEN(dev_priv, 9) ||
1980 IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv))
1981 return pixel_rate;
1982 else if (IS_CHERRYVIEW(dev_priv))
1983 return DIV_ROUND_UP(pixel_rate * 100, 95);
1984 else if (crtc_state->double_wide)
1985 return DIV_ROUND_UP(pixel_rate * 100, 90 * 2);
1986 else
1987 return DIV_ROUND_UP(pixel_rate * 100, 90);
1988 }
1989
intel_planes_min_cdclk(const struct intel_crtc_state * crtc_state)1990 static int intel_planes_min_cdclk(const struct intel_crtc_state *crtc_state)
1991 {
1992 struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
1993 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
1994 struct intel_plane *plane;
1995 int min_cdclk = 0;
1996
1997 for_each_intel_plane_on_crtc(&dev_priv->drm, crtc, plane)
1998 min_cdclk = max(crtc_state->min_cdclk[plane->id], min_cdclk);
1999
2000 return min_cdclk;
2001 }
2002
intel_crtc_compute_min_cdclk(const struct intel_crtc_state * crtc_state)2003 int intel_crtc_compute_min_cdclk(const struct intel_crtc_state *crtc_state)
2004 {
2005 struct drm_i915_private *dev_priv =
2006 to_i915(crtc_state->uapi.crtc->dev);
2007 int min_cdclk;
2008
2009 if (!crtc_state->hw.enable)
2010 return 0;
2011
2012 min_cdclk = intel_pixel_rate_to_cdclk(crtc_state);
2013
2014 /* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */
2015 if (IS_BROADWELL(dev_priv) && hsw_crtc_state_ips_capable(crtc_state))
2016 min_cdclk = DIV_ROUND_UP(min_cdclk * 100, 95);
2017
2018 /* BSpec says "Do not use DisplayPort with CDCLK less than 432 MHz,
2019 * audio enabled, port width x4, and link rate HBR2 (5.4 GHz), or else
2020 * there may be audio corruption or screen corruption." This cdclk
2021 * restriction for GLK is 316.8 MHz.
2022 */
2023 if (intel_crtc_has_dp_encoder(crtc_state) &&
2024 crtc_state->has_audio &&
2025 crtc_state->port_clock >= 540000 &&
2026 crtc_state->lane_count == 4) {
2027 if (IS_CANNONLAKE(dev_priv) || IS_GEMINILAKE(dev_priv)) {
2028 /* Display WA #1145: glk,cnl */
2029 min_cdclk = max(316800, min_cdclk);
2030 } else if (IS_GEN(dev_priv, 9) || IS_BROADWELL(dev_priv)) {
2031 /* Display WA #1144: skl,bxt */
2032 min_cdclk = max(432000, min_cdclk);
2033 }
2034 }
2035
2036 /*
2037 * According to BSpec, "The CD clock frequency must be at least twice
2038 * the frequency of the Azalia BCLK." and BCLK is 96 MHz by default.
2039 */
2040 if (crtc_state->has_audio && INTEL_GEN(dev_priv) >= 9)
2041 min_cdclk = max(2 * 96000, min_cdclk);
2042
2043 /*
2044 * "For DP audio configuration, cdclk frequency shall be set to
2045 * meet the following requirements:
2046 * DP Link Frequency(MHz) | Cdclk frequency(MHz)
2047 * 270 | 320 or higher
2048 * 162 | 200 or higher"
2049 */
2050 if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) &&
2051 intel_crtc_has_dp_encoder(crtc_state) && crtc_state->has_audio)
2052 min_cdclk = max(crtc_state->port_clock, min_cdclk);
2053
2054 /*
2055 * On Valleyview some DSI panels lose (v|h)sync when the clock is lower
2056 * than 320000KHz.
2057 */
2058 if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DSI) &&
2059 IS_VALLEYVIEW(dev_priv))
2060 min_cdclk = max(320000, min_cdclk);
2061
2062 /*
2063 * On Geminilake once the CDCLK gets as low as 79200
2064 * picture gets unstable, despite that values are
2065 * correct for DSI PLL and DE PLL.
2066 */
2067 if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DSI) &&
2068 IS_GEMINILAKE(dev_priv))
2069 min_cdclk = max(158400, min_cdclk);
2070
2071 /* Account for additional needs from the planes */
2072 min_cdclk = max(intel_planes_min_cdclk(crtc_state), min_cdclk);
2073
2074 /*
2075 * HACK. Currently for TGL platforms we calculate
2076 * min_cdclk initially based on pixel_rate divided
2077 * by 2, accounting for also plane requirements,
2078 * however in some cases the lowest possible CDCLK
2079 * doesn't work and causing the underruns.
2080 * Explicitly stating here that this seems to be currently
2081 * rather a Hack, than final solution.
2082 */
2083 if (IS_TIGERLAKE(dev_priv)) {
2084 /*
2085 * Clamp to max_cdclk_freq in case pixel rate is higher,
2086 * in order not to break an 8K, but still leave W/A at place.
2087 */
2088 min_cdclk = max_t(int, min_cdclk,
2089 min_t(int, crtc_state->pixel_rate,
2090 dev_priv->max_cdclk_freq));
2091 }
2092
2093 if (min_cdclk > dev_priv->max_cdclk_freq) {
2094 drm_dbg_kms(&dev_priv->drm,
2095 "required cdclk (%d kHz) exceeds max (%d kHz)\n",
2096 min_cdclk, dev_priv->max_cdclk_freq);
2097 return -EINVAL;
2098 }
2099
2100 return min_cdclk;
2101 }
2102
intel_compute_min_cdclk(struct intel_cdclk_state * cdclk_state)2103 static int intel_compute_min_cdclk(struct intel_cdclk_state *cdclk_state)
2104 {
2105 struct intel_atomic_state *state = cdclk_state->base.state;
2106 struct drm_i915_private *dev_priv = to_i915(state->base.dev);
2107 struct intel_bw_state *bw_state = NULL;
2108 struct intel_crtc *crtc;
2109 struct intel_crtc_state *crtc_state;
2110 int min_cdclk, i;
2111 enum pipe pipe;
2112
2113 for_each_new_intel_crtc_in_state(state, crtc, crtc_state, i) {
2114 int ret;
2115
2116 min_cdclk = intel_crtc_compute_min_cdclk(crtc_state);
2117 if (min_cdclk < 0)
2118 return min_cdclk;
2119
2120 bw_state = intel_atomic_get_bw_state(state);
2121 if (IS_ERR(bw_state))
2122 return PTR_ERR(bw_state);
2123
2124 if (cdclk_state->min_cdclk[i] == min_cdclk)
2125 continue;
2126
2127 cdclk_state->min_cdclk[i] = min_cdclk;
2128
2129 ret = intel_atomic_lock_global_state(&cdclk_state->base);
2130 if (ret)
2131 return ret;
2132 }
2133
2134 min_cdclk = cdclk_state->force_min_cdclk;
2135 for_each_pipe(dev_priv, pipe) {
2136 min_cdclk = max(cdclk_state->min_cdclk[pipe], min_cdclk);
2137
2138 if (!bw_state)
2139 continue;
2140
2141 min_cdclk = max(bw_state->min_cdclk, min_cdclk);
2142 }
2143
2144 return min_cdclk;
2145 }
2146
2147 /*
2148 * Account for port clock min voltage level requirements.
2149 * This only really does something on CNL+ but can be
2150 * called on earlier platforms as well.
2151 *
2152 * Note that this functions assumes that 0 is
2153 * the lowest voltage value, and higher values
2154 * correspond to increasingly higher voltages.
2155 *
2156 * Should that relationship no longer hold on
2157 * future platforms this code will need to be
2158 * adjusted.
2159 */
bxt_compute_min_voltage_level(struct intel_cdclk_state * cdclk_state)2160 static int bxt_compute_min_voltage_level(struct intel_cdclk_state *cdclk_state)
2161 {
2162 struct intel_atomic_state *state = cdclk_state->base.state;
2163 struct drm_i915_private *dev_priv = to_i915(state->base.dev);
2164 struct intel_crtc *crtc;
2165 struct intel_crtc_state *crtc_state;
2166 u8 min_voltage_level;
2167 int i;
2168 enum pipe pipe;
2169
2170 for_each_new_intel_crtc_in_state(state, crtc, crtc_state, i) {
2171 int ret;
2172
2173 if (crtc_state->hw.enable)
2174 min_voltage_level = crtc_state->min_voltage_level;
2175 else
2176 min_voltage_level = 0;
2177
2178 if (cdclk_state->min_voltage_level[i] == min_voltage_level)
2179 continue;
2180
2181 cdclk_state->min_voltage_level[i] = min_voltage_level;
2182
2183 ret = intel_atomic_lock_global_state(&cdclk_state->base);
2184 if (ret)
2185 return ret;
2186 }
2187
2188 min_voltage_level = 0;
2189 for_each_pipe(dev_priv, pipe)
2190 min_voltage_level = max(cdclk_state->min_voltage_level[pipe],
2191 min_voltage_level);
2192
2193 return min_voltage_level;
2194 }
2195
vlv_modeset_calc_cdclk(struct intel_cdclk_state * cdclk_state)2196 static int vlv_modeset_calc_cdclk(struct intel_cdclk_state *cdclk_state)
2197 {
2198 struct intel_atomic_state *state = cdclk_state->base.state;
2199 struct drm_i915_private *dev_priv = to_i915(state->base.dev);
2200 int min_cdclk, cdclk;
2201
2202 min_cdclk = intel_compute_min_cdclk(cdclk_state);
2203 if (min_cdclk < 0)
2204 return min_cdclk;
2205
2206 cdclk = vlv_calc_cdclk(dev_priv, min_cdclk);
2207
2208 cdclk_state->logical.cdclk = cdclk;
2209 cdclk_state->logical.voltage_level =
2210 vlv_calc_voltage_level(dev_priv, cdclk);
2211
2212 if (!cdclk_state->active_pipes) {
2213 cdclk = vlv_calc_cdclk(dev_priv, cdclk_state->force_min_cdclk);
2214
2215 cdclk_state->actual.cdclk = cdclk;
2216 cdclk_state->actual.voltage_level =
2217 vlv_calc_voltage_level(dev_priv, cdclk);
2218 } else {
2219 cdclk_state->actual = cdclk_state->logical;
2220 }
2221
2222 return 0;
2223 }
2224
bdw_modeset_calc_cdclk(struct intel_cdclk_state * cdclk_state)2225 static int bdw_modeset_calc_cdclk(struct intel_cdclk_state *cdclk_state)
2226 {
2227 int min_cdclk, cdclk;
2228
2229 min_cdclk = intel_compute_min_cdclk(cdclk_state);
2230 if (min_cdclk < 0)
2231 return min_cdclk;
2232
2233 /*
2234 * FIXME should also account for plane ratio
2235 * once 64bpp pixel formats are supported.
2236 */
2237 cdclk = bdw_calc_cdclk(min_cdclk);
2238
2239 cdclk_state->logical.cdclk = cdclk;
2240 cdclk_state->logical.voltage_level =
2241 bdw_calc_voltage_level(cdclk);
2242
2243 if (!cdclk_state->active_pipes) {
2244 cdclk = bdw_calc_cdclk(cdclk_state->force_min_cdclk);
2245
2246 cdclk_state->actual.cdclk = cdclk;
2247 cdclk_state->actual.voltage_level =
2248 bdw_calc_voltage_level(cdclk);
2249 } else {
2250 cdclk_state->actual = cdclk_state->logical;
2251 }
2252
2253 return 0;
2254 }
2255
skl_dpll0_vco(struct intel_cdclk_state * cdclk_state)2256 static int skl_dpll0_vco(struct intel_cdclk_state *cdclk_state)
2257 {
2258 struct intel_atomic_state *state = cdclk_state->base.state;
2259 struct drm_i915_private *dev_priv = to_i915(state->base.dev);
2260 struct intel_crtc *crtc;
2261 struct intel_crtc_state *crtc_state;
2262 int vco, i;
2263
2264 vco = cdclk_state->logical.vco;
2265 if (!vco)
2266 vco = dev_priv->skl_preferred_vco_freq;
2267
2268 for_each_new_intel_crtc_in_state(state, crtc, crtc_state, i) {
2269 if (!crtc_state->hw.enable)
2270 continue;
2271
2272 if (!intel_crtc_has_type(crtc_state, INTEL_OUTPUT_EDP))
2273 continue;
2274
2275 /*
2276 * DPLL0 VCO may need to be adjusted to get the correct
2277 * clock for eDP. This will affect cdclk as well.
2278 */
2279 switch (crtc_state->port_clock / 2) {
2280 case 108000:
2281 case 216000:
2282 vco = 8640000;
2283 break;
2284 default:
2285 vco = 8100000;
2286 break;
2287 }
2288 }
2289
2290 return vco;
2291 }
2292
skl_modeset_calc_cdclk(struct intel_cdclk_state * cdclk_state)2293 static int skl_modeset_calc_cdclk(struct intel_cdclk_state *cdclk_state)
2294 {
2295 int min_cdclk, cdclk, vco;
2296
2297 min_cdclk = intel_compute_min_cdclk(cdclk_state);
2298 if (min_cdclk < 0)
2299 return min_cdclk;
2300
2301 vco = skl_dpll0_vco(cdclk_state);
2302
2303 /*
2304 * FIXME should also account for plane ratio
2305 * once 64bpp pixel formats are supported.
2306 */
2307 cdclk = skl_calc_cdclk(min_cdclk, vco);
2308
2309 cdclk_state->logical.vco = vco;
2310 cdclk_state->logical.cdclk = cdclk;
2311 cdclk_state->logical.voltage_level =
2312 skl_calc_voltage_level(cdclk);
2313
2314 if (!cdclk_state->active_pipes) {
2315 cdclk = skl_calc_cdclk(cdclk_state->force_min_cdclk, vco);
2316
2317 cdclk_state->actual.vco = vco;
2318 cdclk_state->actual.cdclk = cdclk;
2319 cdclk_state->actual.voltage_level =
2320 skl_calc_voltage_level(cdclk);
2321 } else {
2322 cdclk_state->actual = cdclk_state->logical;
2323 }
2324
2325 return 0;
2326 }
2327
bxt_modeset_calc_cdclk(struct intel_cdclk_state * cdclk_state)2328 static int bxt_modeset_calc_cdclk(struct intel_cdclk_state *cdclk_state)
2329 {
2330 struct intel_atomic_state *state = cdclk_state->base.state;
2331 struct drm_i915_private *dev_priv = to_i915(state->base.dev);
2332 int min_cdclk, min_voltage_level, cdclk, vco;
2333
2334 min_cdclk = intel_compute_min_cdclk(cdclk_state);
2335 if (min_cdclk < 0)
2336 return min_cdclk;
2337
2338 min_voltage_level = bxt_compute_min_voltage_level(cdclk_state);
2339 if (min_voltage_level < 0)
2340 return min_voltage_level;
2341
2342 cdclk = bxt_calc_cdclk(dev_priv, min_cdclk);
2343 vco = bxt_calc_cdclk_pll_vco(dev_priv, cdclk);
2344
2345 cdclk_state->logical.vco = vco;
2346 cdclk_state->logical.cdclk = cdclk;
2347 cdclk_state->logical.voltage_level =
2348 max_t(int, min_voltage_level,
2349 dev_priv->display.calc_voltage_level(cdclk));
2350
2351 if (!cdclk_state->active_pipes) {
2352 cdclk = bxt_calc_cdclk(dev_priv, cdclk_state->force_min_cdclk);
2353 vco = bxt_calc_cdclk_pll_vco(dev_priv, cdclk);
2354
2355 cdclk_state->actual.vco = vco;
2356 cdclk_state->actual.cdclk = cdclk;
2357 cdclk_state->actual.voltage_level =
2358 dev_priv->display.calc_voltage_level(cdclk);
2359 } else {
2360 cdclk_state->actual = cdclk_state->logical;
2361 }
2362
2363 return 0;
2364 }
2365
intel_modeset_all_pipes(struct intel_atomic_state * state)2366 static int intel_modeset_all_pipes(struct intel_atomic_state *state)
2367 {
2368 struct drm_i915_private *dev_priv = to_i915(state->base.dev);
2369 struct intel_crtc *crtc;
2370
2371 /*
2372 * Add all pipes to the state, and force
2373 * a modeset on all the active ones.
2374 */
2375 for_each_intel_crtc(&dev_priv->drm, crtc) {
2376 struct intel_crtc_state *crtc_state;
2377 int ret;
2378
2379 crtc_state = intel_atomic_get_crtc_state(&state->base, crtc);
2380 if (IS_ERR(crtc_state))
2381 return PTR_ERR(crtc_state);
2382
2383 if (!crtc_state->hw.active ||
2384 drm_atomic_crtc_needs_modeset(&crtc_state->uapi))
2385 continue;
2386
2387 crtc_state->uapi.mode_changed = true;
2388
2389 ret = drm_atomic_add_affected_connectors(&state->base,
2390 &crtc->base);
2391 if (ret)
2392 return ret;
2393
2394 ret = drm_atomic_add_affected_planes(&state->base,
2395 &crtc->base);
2396 if (ret)
2397 return ret;
2398
2399 crtc_state->update_planes |= crtc_state->active_planes;
2400 }
2401
2402 return 0;
2403 }
2404
fixed_modeset_calc_cdclk(struct intel_cdclk_state * cdclk_state)2405 static int fixed_modeset_calc_cdclk(struct intel_cdclk_state *cdclk_state)
2406 {
2407 int min_cdclk;
2408
2409 /*
2410 * We can't change the cdclk frequency, but we still want to
2411 * check that the required minimum frequency doesn't exceed
2412 * the actual cdclk frequency.
2413 */
2414 min_cdclk = intel_compute_min_cdclk(cdclk_state);
2415 if (min_cdclk < 0)
2416 return min_cdclk;
2417
2418 return 0;
2419 }
2420
intel_cdclk_duplicate_state(struct intel_global_obj * obj)2421 static struct intel_global_state *intel_cdclk_duplicate_state(struct intel_global_obj *obj)
2422 {
2423 struct intel_cdclk_state *cdclk_state;
2424
2425 cdclk_state = kmemdup(obj->state, sizeof(*cdclk_state), GFP_KERNEL);
2426 if (!cdclk_state)
2427 return NULL;
2428
2429 cdclk_state->pipe = INVALID_PIPE;
2430
2431 return &cdclk_state->base;
2432 }
2433
intel_cdclk_destroy_state(struct intel_global_obj * obj,struct intel_global_state * state)2434 static void intel_cdclk_destroy_state(struct intel_global_obj *obj,
2435 struct intel_global_state *state)
2436 {
2437 kfree(state);
2438 }
2439
2440 static const struct intel_global_state_funcs intel_cdclk_funcs = {
2441 .atomic_duplicate_state = intel_cdclk_duplicate_state,
2442 .atomic_destroy_state = intel_cdclk_destroy_state,
2443 };
2444
2445 struct intel_cdclk_state *
intel_atomic_get_cdclk_state(struct intel_atomic_state * state)2446 intel_atomic_get_cdclk_state(struct intel_atomic_state *state)
2447 {
2448 struct drm_i915_private *dev_priv = to_i915(state->base.dev);
2449 struct intel_global_state *cdclk_state;
2450
2451 cdclk_state = intel_atomic_get_global_obj_state(state, &dev_priv->cdclk.obj);
2452 if (IS_ERR(cdclk_state))
2453 return ERR_CAST(cdclk_state);
2454
2455 return to_intel_cdclk_state(cdclk_state);
2456 }
2457
intel_cdclk_init(struct drm_i915_private * dev_priv)2458 int intel_cdclk_init(struct drm_i915_private *dev_priv)
2459 {
2460 struct intel_cdclk_state *cdclk_state;
2461
2462 cdclk_state = kzalloc(sizeof(*cdclk_state), GFP_KERNEL);
2463 if (!cdclk_state)
2464 return -ENOMEM;
2465
2466 intel_atomic_global_obj_init(dev_priv, &dev_priv->cdclk.obj,
2467 &cdclk_state->base, &intel_cdclk_funcs);
2468
2469 return 0;
2470 }
2471
intel_modeset_calc_cdclk(struct intel_atomic_state * state)2472 int intel_modeset_calc_cdclk(struct intel_atomic_state *state)
2473 {
2474 struct drm_i915_private *dev_priv = to_i915(state->base.dev);
2475 const struct intel_cdclk_state *old_cdclk_state;
2476 struct intel_cdclk_state *new_cdclk_state;
2477 enum pipe pipe;
2478 int ret;
2479
2480 new_cdclk_state = intel_atomic_get_cdclk_state(state);
2481 if (IS_ERR(new_cdclk_state))
2482 return PTR_ERR(new_cdclk_state);
2483
2484 old_cdclk_state = intel_atomic_get_old_cdclk_state(state);
2485
2486 new_cdclk_state->active_pipes =
2487 intel_calc_active_pipes(state, old_cdclk_state->active_pipes);
2488
2489 ret = dev_priv->display.modeset_calc_cdclk(new_cdclk_state);
2490 if (ret)
2491 return ret;
2492
2493 if (intel_cdclk_changed(&old_cdclk_state->actual,
2494 &new_cdclk_state->actual)) {
2495 /*
2496 * Also serialize commits across all crtcs
2497 * if the actual hw needs to be poked.
2498 */
2499 ret = intel_atomic_serialize_global_state(&new_cdclk_state->base);
2500 if (ret)
2501 return ret;
2502 } else if (old_cdclk_state->active_pipes != new_cdclk_state->active_pipes ||
2503 old_cdclk_state->force_min_cdclk != new_cdclk_state->force_min_cdclk ||
2504 intel_cdclk_changed(&old_cdclk_state->logical,
2505 &new_cdclk_state->logical)) {
2506 ret = intel_atomic_lock_global_state(&new_cdclk_state->base);
2507 if (ret)
2508 return ret;
2509 } else {
2510 return 0;
2511 }
2512
2513 if (is_power_of_2(new_cdclk_state->active_pipes) &&
2514 intel_cdclk_can_cd2x_update(dev_priv,
2515 &old_cdclk_state->actual,
2516 &new_cdclk_state->actual)) {
2517 struct intel_crtc *crtc;
2518 struct intel_crtc_state *crtc_state;
2519
2520 pipe = ilog2(new_cdclk_state->active_pipes);
2521 crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
2522
2523 crtc_state = intel_atomic_get_crtc_state(&state->base, crtc);
2524 if (IS_ERR(crtc_state))
2525 return PTR_ERR(crtc_state);
2526
2527 if (drm_atomic_crtc_needs_modeset(&crtc_state->uapi))
2528 pipe = INVALID_PIPE;
2529 } else {
2530 pipe = INVALID_PIPE;
2531 }
2532
2533 if (pipe != INVALID_PIPE) {
2534 new_cdclk_state->pipe = pipe;
2535
2536 drm_dbg_kms(&dev_priv->drm,
2537 "Can change cdclk with pipe %c active\n",
2538 pipe_name(pipe));
2539 } else if (intel_cdclk_needs_modeset(&old_cdclk_state->actual,
2540 &new_cdclk_state->actual)) {
2541 /* All pipes must be switched off while we change the cdclk. */
2542 ret = intel_modeset_all_pipes(state);
2543 if (ret)
2544 return ret;
2545
2546 new_cdclk_state->pipe = INVALID_PIPE;
2547
2548 drm_dbg_kms(&dev_priv->drm,
2549 "Modeset required for cdclk change\n");
2550 }
2551
2552 drm_dbg_kms(&dev_priv->drm,
2553 "New cdclk calculated to be logical %u kHz, actual %u kHz\n",
2554 new_cdclk_state->logical.cdclk,
2555 new_cdclk_state->actual.cdclk);
2556 drm_dbg_kms(&dev_priv->drm,
2557 "New voltage level calculated to be logical %u, actual %u\n",
2558 new_cdclk_state->logical.voltage_level,
2559 new_cdclk_state->actual.voltage_level);
2560
2561 return 0;
2562 }
2563
intel_compute_max_dotclk(struct drm_i915_private * dev_priv)2564 static int intel_compute_max_dotclk(struct drm_i915_private *dev_priv)
2565 {
2566 int max_cdclk_freq = dev_priv->max_cdclk_freq;
2567
2568 if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv))
2569 return 2 * max_cdclk_freq;
2570 else if (IS_GEN(dev_priv, 9) ||
2571 IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv))
2572 return max_cdclk_freq;
2573 else if (IS_CHERRYVIEW(dev_priv))
2574 return max_cdclk_freq*95/100;
2575 else if (INTEL_GEN(dev_priv) < 4)
2576 return 2*max_cdclk_freq*90/100;
2577 else
2578 return max_cdclk_freq*90/100;
2579 }
2580
2581 /**
2582 * intel_update_max_cdclk - Determine the maximum support CDCLK frequency
2583 * @dev_priv: i915 device
2584 *
2585 * Determine the maximum CDCLK frequency the platform supports, and also
2586 * derive the maximum dot clock frequency the maximum CDCLK frequency
2587 * allows.
2588 */
intel_update_max_cdclk(struct drm_i915_private * dev_priv)2589 void intel_update_max_cdclk(struct drm_i915_private *dev_priv)
2590 {
2591 if (IS_ELKHARTLAKE(dev_priv)) {
2592 if (dev_priv->cdclk.hw.ref == 24000)
2593 dev_priv->max_cdclk_freq = 552000;
2594 else
2595 dev_priv->max_cdclk_freq = 556800;
2596 } else if (INTEL_GEN(dev_priv) >= 11) {
2597 if (dev_priv->cdclk.hw.ref == 24000)
2598 dev_priv->max_cdclk_freq = 648000;
2599 else
2600 dev_priv->max_cdclk_freq = 652800;
2601 } else if (IS_CANNONLAKE(dev_priv)) {
2602 dev_priv->max_cdclk_freq = 528000;
2603 } else if (IS_GEN9_BC(dev_priv)) {
2604 u32 limit = intel_de_read(dev_priv, SKL_DFSM) & SKL_DFSM_CDCLK_LIMIT_MASK;
2605 int max_cdclk, vco;
2606
2607 vco = dev_priv->skl_preferred_vco_freq;
2608 drm_WARN_ON(&dev_priv->drm, vco != 8100000 && vco != 8640000);
2609
2610 /*
2611 * Use the lower (vco 8640) cdclk values as a
2612 * first guess. skl_calc_cdclk() will correct it
2613 * if the preferred vco is 8100 instead.
2614 */
2615 if (limit == SKL_DFSM_CDCLK_LIMIT_675)
2616 max_cdclk = 617143;
2617 else if (limit == SKL_DFSM_CDCLK_LIMIT_540)
2618 max_cdclk = 540000;
2619 else if (limit == SKL_DFSM_CDCLK_LIMIT_450)
2620 max_cdclk = 432000;
2621 else
2622 max_cdclk = 308571;
2623
2624 dev_priv->max_cdclk_freq = skl_calc_cdclk(max_cdclk, vco);
2625 } else if (IS_GEMINILAKE(dev_priv)) {
2626 dev_priv->max_cdclk_freq = 316800;
2627 } else if (IS_BROXTON(dev_priv)) {
2628 dev_priv->max_cdclk_freq = 624000;
2629 } else if (IS_BROADWELL(dev_priv)) {
2630 /*
2631 * FIXME with extra cooling we can allow
2632 * 540 MHz for ULX and 675 Mhz for ULT.
2633 * How can we know if extra cooling is
2634 * available? PCI ID, VTB, something else?
2635 */
2636 if (intel_de_read(dev_priv, FUSE_STRAP) & HSW_CDCLK_LIMIT)
2637 dev_priv->max_cdclk_freq = 450000;
2638 else if (IS_BDW_ULX(dev_priv))
2639 dev_priv->max_cdclk_freq = 450000;
2640 else if (IS_BDW_ULT(dev_priv))
2641 dev_priv->max_cdclk_freq = 540000;
2642 else
2643 dev_priv->max_cdclk_freq = 675000;
2644 } else if (IS_CHERRYVIEW(dev_priv)) {
2645 dev_priv->max_cdclk_freq = 320000;
2646 } else if (IS_VALLEYVIEW(dev_priv)) {
2647 dev_priv->max_cdclk_freq = 400000;
2648 } else {
2649 /* otherwise assume cdclk is fixed */
2650 dev_priv->max_cdclk_freq = dev_priv->cdclk.hw.cdclk;
2651 }
2652
2653 dev_priv->max_dotclk_freq = intel_compute_max_dotclk(dev_priv);
2654
2655 drm_dbg(&dev_priv->drm, "Max CD clock rate: %d kHz\n",
2656 dev_priv->max_cdclk_freq);
2657
2658 drm_dbg(&dev_priv->drm, "Max dotclock rate: %d kHz\n",
2659 dev_priv->max_dotclk_freq);
2660 }
2661
2662 /**
2663 * intel_update_cdclk - Determine the current CDCLK frequency
2664 * @dev_priv: i915 device
2665 *
2666 * Determine the current CDCLK frequency.
2667 */
intel_update_cdclk(struct drm_i915_private * dev_priv)2668 void intel_update_cdclk(struct drm_i915_private *dev_priv)
2669 {
2670 dev_priv->display.get_cdclk(dev_priv, &dev_priv->cdclk.hw);
2671
2672 /*
2673 * 9:0 CMBUS [sic] CDCLK frequency (cdfreq):
2674 * Programmng [sic] note: bit[9:2] should be programmed to the number
2675 * of cdclk that generates 4MHz reference clock freq which is used to
2676 * generate GMBus clock. This will vary with the cdclk freq.
2677 */
2678 if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
2679 intel_de_write(dev_priv, GMBUSFREQ_VLV,
2680 DIV_ROUND_UP(dev_priv->cdclk.hw.cdclk, 1000));
2681 }
2682
cnp_rawclk(struct drm_i915_private * dev_priv)2683 static int cnp_rawclk(struct drm_i915_private *dev_priv)
2684 {
2685 u32 rawclk;
2686 int divider, fraction;
2687
2688 if (intel_de_read(dev_priv, SFUSE_STRAP) & SFUSE_STRAP_RAW_FREQUENCY) {
2689 /* 24 MHz */
2690 divider = 24000;
2691 fraction = 0;
2692 } else {
2693 /* 19.2 MHz */
2694 divider = 19000;
2695 fraction = 200;
2696 }
2697
2698 rawclk = CNP_RAWCLK_DIV(divider / 1000);
2699 if (fraction) {
2700 int numerator = 1;
2701
2702 rawclk |= CNP_RAWCLK_DEN(DIV_ROUND_CLOSEST(numerator * 1000,
2703 fraction) - 1);
2704 if (INTEL_PCH_TYPE(dev_priv) >= PCH_ICP)
2705 rawclk |= ICP_RAWCLK_NUM(numerator);
2706 }
2707
2708 intel_de_write(dev_priv, PCH_RAWCLK_FREQ, rawclk);
2709 return divider + fraction;
2710 }
2711
pch_rawclk(struct drm_i915_private * dev_priv)2712 static int pch_rawclk(struct drm_i915_private *dev_priv)
2713 {
2714 return (intel_de_read(dev_priv, PCH_RAWCLK_FREQ) & RAWCLK_FREQ_MASK) * 1000;
2715 }
2716
vlv_hrawclk(struct drm_i915_private * dev_priv)2717 static int vlv_hrawclk(struct drm_i915_private *dev_priv)
2718 {
2719 /* RAWCLK_FREQ_VLV register updated from power well code */
2720 return vlv_get_cck_clock_hpll(dev_priv, "hrawclk",
2721 CCK_DISPLAY_REF_CLOCK_CONTROL);
2722 }
2723
i9xx_hrawclk(struct drm_i915_private * dev_priv)2724 static int i9xx_hrawclk(struct drm_i915_private *dev_priv)
2725 {
2726 u32 clkcfg;
2727
2728 /*
2729 * hrawclock is 1/4 the FSB frequency
2730 *
2731 * Note that this only reads the state of the FSB
2732 * straps, not the actual FSB frequency. Some BIOSen
2733 * let you configure each independently. Ideally we'd
2734 * read out the actual FSB frequency but sadly we
2735 * don't know which registers have that information,
2736 * and all the relevant docs have gone to bit heaven :(
2737 */
2738 clkcfg = intel_de_read(dev_priv, CLKCFG) & CLKCFG_FSB_MASK;
2739
2740 if (IS_MOBILE(dev_priv)) {
2741 switch (clkcfg) {
2742 case CLKCFG_FSB_400:
2743 return 100000;
2744 case CLKCFG_FSB_533:
2745 return 133333;
2746 case CLKCFG_FSB_667:
2747 return 166667;
2748 case CLKCFG_FSB_800:
2749 return 200000;
2750 case CLKCFG_FSB_1067:
2751 return 266667;
2752 case CLKCFG_FSB_1333:
2753 return 333333;
2754 default:
2755 MISSING_CASE(clkcfg);
2756 return 133333;
2757 }
2758 } else {
2759 switch (clkcfg) {
2760 case CLKCFG_FSB_400_ALT:
2761 return 100000;
2762 case CLKCFG_FSB_533:
2763 return 133333;
2764 case CLKCFG_FSB_667:
2765 return 166667;
2766 case CLKCFG_FSB_800:
2767 return 200000;
2768 case CLKCFG_FSB_1067_ALT:
2769 return 266667;
2770 case CLKCFG_FSB_1333_ALT:
2771 return 333333;
2772 case CLKCFG_FSB_1600_ALT:
2773 return 400000;
2774 default:
2775 return 133333;
2776 }
2777 }
2778 }
2779
2780 /**
2781 * intel_read_rawclk - Determine the current RAWCLK frequency
2782 * @dev_priv: i915 device
2783 *
2784 * Determine the current RAWCLK frequency. RAWCLK is a fixed
2785 * frequency clock so this needs to done only once.
2786 */
intel_read_rawclk(struct drm_i915_private * dev_priv)2787 u32 intel_read_rawclk(struct drm_i915_private *dev_priv)
2788 {
2789 u32 freq;
2790
2791 if (INTEL_PCH_TYPE(dev_priv) >= PCH_CNP)
2792 freq = cnp_rawclk(dev_priv);
2793 else if (HAS_PCH_SPLIT(dev_priv))
2794 freq = pch_rawclk(dev_priv);
2795 else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
2796 freq = vlv_hrawclk(dev_priv);
2797 else if (INTEL_GEN(dev_priv) >= 3)
2798 freq = i9xx_hrawclk(dev_priv);
2799 else
2800 /* no rawclk on other platforms, or no need to know it */
2801 return 0;
2802
2803 return freq;
2804 }
2805
2806 /**
2807 * intel_init_cdclk_hooks - Initialize CDCLK related modesetting hooks
2808 * @dev_priv: i915 device
2809 */
intel_init_cdclk_hooks(struct drm_i915_private * dev_priv)2810 void intel_init_cdclk_hooks(struct drm_i915_private *dev_priv)
2811 {
2812 if (INTEL_GEN(dev_priv) >= 12) {
2813 dev_priv->display.set_cdclk = bxt_set_cdclk;
2814 dev_priv->display.bw_calc_min_cdclk = skl_bw_calc_min_cdclk;
2815 dev_priv->display.modeset_calc_cdclk = bxt_modeset_calc_cdclk;
2816 dev_priv->display.calc_voltage_level = tgl_calc_voltage_level;
2817 dev_priv->cdclk.table = icl_cdclk_table;
2818 } else if (IS_ELKHARTLAKE(dev_priv)) {
2819 dev_priv->display.set_cdclk = bxt_set_cdclk;
2820 dev_priv->display.bw_calc_min_cdclk = skl_bw_calc_min_cdclk;
2821 dev_priv->display.modeset_calc_cdclk = bxt_modeset_calc_cdclk;
2822 dev_priv->display.calc_voltage_level = ehl_calc_voltage_level;
2823 dev_priv->cdclk.table = icl_cdclk_table;
2824 } else if (INTEL_GEN(dev_priv) >= 11) {
2825 dev_priv->display.set_cdclk = bxt_set_cdclk;
2826 dev_priv->display.bw_calc_min_cdclk = skl_bw_calc_min_cdclk;
2827 dev_priv->display.modeset_calc_cdclk = bxt_modeset_calc_cdclk;
2828 dev_priv->display.calc_voltage_level = icl_calc_voltage_level;
2829 dev_priv->cdclk.table = icl_cdclk_table;
2830 } else if (IS_CANNONLAKE(dev_priv)) {
2831 dev_priv->display.bw_calc_min_cdclk = skl_bw_calc_min_cdclk;
2832 dev_priv->display.set_cdclk = bxt_set_cdclk;
2833 dev_priv->display.modeset_calc_cdclk = bxt_modeset_calc_cdclk;
2834 dev_priv->display.calc_voltage_level = cnl_calc_voltage_level;
2835 dev_priv->cdclk.table = cnl_cdclk_table;
2836 } else if (IS_GEN9_LP(dev_priv)) {
2837 dev_priv->display.bw_calc_min_cdclk = skl_bw_calc_min_cdclk;
2838 dev_priv->display.set_cdclk = bxt_set_cdclk;
2839 dev_priv->display.modeset_calc_cdclk = bxt_modeset_calc_cdclk;
2840 dev_priv->display.calc_voltage_level = bxt_calc_voltage_level;
2841 if (IS_GEMINILAKE(dev_priv))
2842 dev_priv->cdclk.table = glk_cdclk_table;
2843 else
2844 dev_priv->cdclk.table = bxt_cdclk_table;
2845 } else if (IS_GEN9_BC(dev_priv)) {
2846 dev_priv->display.bw_calc_min_cdclk = skl_bw_calc_min_cdclk;
2847 dev_priv->display.set_cdclk = skl_set_cdclk;
2848 dev_priv->display.modeset_calc_cdclk = skl_modeset_calc_cdclk;
2849 } else if (IS_BROADWELL(dev_priv)) {
2850 dev_priv->display.bw_calc_min_cdclk = intel_bw_calc_min_cdclk;
2851 dev_priv->display.set_cdclk = bdw_set_cdclk;
2852 dev_priv->display.modeset_calc_cdclk = bdw_modeset_calc_cdclk;
2853 } else if (IS_CHERRYVIEW(dev_priv)) {
2854 dev_priv->display.bw_calc_min_cdclk = intel_bw_calc_min_cdclk;
2855 dev_priv->display.set_cdclk = chv_set_cdclk;
2856 dev_priv->display.modeset_calc_cdclk = vlv_modeset_calc_cdclk;
2857 } else if (IS_VALLEYVIEW(dev_priv)) {
2858 dev_priv->display.bw_calc_min_cdclk = intel_bw_calc_min_cdclk;
2859 dev_priv->display.set_cdclk = vlv_set_cdclk;
2860 dev_priv->display.modeset_calc_cdclk = vlv_modeset_calc_cdclk;
2861 } else {
2862 dev_priv->display.bw_calc_min_cdclk = intel_bw_calc_min_cdclk;
2863 dev_priv->display.modeset_calc_cdclk = fixed_modeset_calc_cdclk;
2864 }
2865
2866 if (INTEL_GEN(dev_priv) >= 10 || IS_GEN9_LP(dev_priv))
2867 dev_priv->display.get_cdclk = bxt_get_cdclk;
2868 else if (IS_GEN9_BC(dev_priv))
2869 dev_priv->display.get_cdclk = skl_get_cdclk;
2870 else if (IS_BROADWELL(dev_priv))
2871 dev_priv->display.get_cdclk = bdw_get_cdclk;
2872 else if (IS_HASWELL(dev_priv))
2873 dev_priv->display.get_cdclk = hsw_get_cdclk;
2874 else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
2875 dev_priv->display.get_cdclk = vlv_get_cdclk;
2876 else if (IS_GEN(dev_priv, 6) || IS_IVYBRIDGE(dev_priv))
2877 dev_priv->display.get_cdclk = fixed_400mhz_get_cdclk;
2878 else if (IS_GEN(dev_priv, 5))
2879 dev_priv->display.get_cdclk = fixed_450mhz_get_cdclk;
2880 else if (IS_GM45(dev_priv))
2881 dev_priv->display.get_cdclk = gm45_get_cdclk;
2882 else if (IS_G45(dev_priv))
2883 dev_priv->display.get_cdclk = g33_get_cdclk;
2884 else if (IS_I965GM(dev_priv))
2885 dev_priv->display.get_cdclk = i965gm_get_cdclk;
2886 else if (IS_I965G(dev_priv))
2887 dev_priv->display.get_cdclk = fixed_400mhz_get_cdclk;
2888 else if (IS_PINEVIEW(dev_priv))
2889 dev_priv->display.get_cdclk = pnv_get_cdclk;
2890 else if (IS_G33(dev_priv))
2891 dev_priv->display.get_cdclk = g33_get_cdclk;
2892 else if (IS_I945GM(dev_priv))
2893 dev_priv->display.get_cdclk = i945gm_get_cdclk;
2894 else if (IS_I945G(dev_priv))
2895 dev_priv->display.get_cdclk = fixed_400mhz_get_cdclk;
2896 else if (IS_I915GM(dev_priv))
2897 dev_priv->display.get_cdclk = i915gm_get_cdclk;
2898 else if (IS_I915G(dev_priv))
2899 dev_priv->display.get_cdclk = fixed_333mhz_get_cdclk;
2900 else if (IS_I865G(dev_priv))
2901 dev_priv->display.get_cdclk = fixed_266mhz_get_cdclk;
2902 else if (IS_I85X(dev_priv))
2903 dev_priv->display.get_cdclk = i85x_get_cdclk;
2904 else if (IS_I845G(dev_priv))
2905 dev_priv->display.get_cdclk = fixed_200mhz_get_cdclk;
2906 else if (IS_I830(dev_priv))
2907 dev_priv->display.get_cdclk = fixed_133mhz_get_cdclk;
2908
2909 if (drm_WARN(&dev_priv->drm, !dev_priv->display.get_cdclk,
2910 "Unknown platform. Assuming 133 MHz CDCLK\n"))
2911 dev_priv->display.get_cdclk = fixed_133mhz_get_cdclk;
2912 }
2913
