1 // SPDX-License-Identifier: GPL-2.0
2 /********************************************************************************************************************************
3 * This file is created to process BA Action Frame. According to 802.11 spec, there are 3 BA action types at all. And as BA is
4 * related to TS, this part need some structure defined in QOS side code. Also TX RX is going to be resturctured, so how to send
5 * ADDBAREQ ADDBARSP and DELBA packet is still on consideration. Temporarily use MANAGE QUEUE instead of Normal Queue.
6 * WB 2008-05-27
7 * *****************************************************************************************************************************/
8 #include <asm/byteorder.h>
9 #include <asm/unaligned.h>
10 #include "ieee80211.h"
11 #include "rtl819x_BA.h"
12
13 /********************************************************************************************************************
14 *function: Activate BA entry. And if Time is nozero, start timer.
15 * input: struct ba_record *pBA //BA entry to be enabled
16 * u16 Time //indicate time delay.
17 * output: none
18 ********************************************************************************************************************/
ActivateBAEntry(struct ieee80211_device * ieee,struct ba_record * pBA,u16 Time)19 static void ActivateBAEntry(struct ieee80211_device *ieee, struct ba_record *pBA, u16 Time)
20 {
21 pBA->valid = true;
22 if (Time != 0)
23 mod_timer(&pBA->timer, jiffies + msecs_to_jiffies(Time));
24 }
25
26 /********************************************************************************************************************
27 *function: deactivate BA entry, including its timer.
28 * input: struct ba_record *pBA //BA entry to be disabled
29 * output: none
30 ********************************************************************************************************************/
DeActivateBAEntry(struct ieee80211_device * ieee,struct ba_record * pBA)31 static void DeActivateBAEntry(struct ieee80211_device *ieee, struct ba_record *pBA)
32 {
33 pBA->valid = false;
34 del_timer_sync(&pBA->timer);
35 }
36 /********************************************************************************************************************
37 *function: deactivete BA entry in Tx Ts, and send DELBA.
38 * input:
39 * struct tx_ts_record *pTxTs //Tx Ts which is to deactivate BA entry.
40 * output: none
41 * notice: As struct tx_ts_record * structure will be defined in QOS, so wait to be merged. //FIXME
42 ********************************************************************************************************************/
TxTsDeleteBA(struct ieee80211_device * ieee,struct tx_ts_record * pTxTs)43 static u8 TxTsDeleteBA(struct ieee80211_device *ieee, struct tx_ts_record *pTxTs)
44 {
45 struct ba_record *pAdmittedBa = &pTxTs->tx_admitted_ba_record; //These two BA entries must exist in TS structure
46 struct ba_record *pPendingBa = &pTxTs->tx_pending_ba_record;
47 u8 bSendDELBA = false;
48
49 // Delete pending BA
50 if (pPendingBa->valid) {
51 DeActivateBAEntry(ieee, pPendingBa);
52 bSendDELBA = true;
53 }
54
55 // Delete admitted BA
56 if (pAdmittedBa->valid) {
57 DeActivateBAEntry(ieee, pAdmittedBa);
58 bSendDELBA = true;
59 }
60
61 return bSendDELBA;
62 }
63
64 /********************************************************************************************************************
65 *function: deactivete BA entry in Tx Ts, and send DELBA.
66 * input:
67 * struct rx_ts_record *pRxTs //Rx Ts which is to deactivate BA entry.
68 * output: none
69 * notice: As struct rx_ts_record * structure will be defined in QOS, so wait to be merged. //FIXME, same with above
70 ********************************************************************************************************************/
RxTsDeleteBA(struct ieee80211_device * ieee,struct rx_ts_record * pRxTs)71 static u8 RxTsDeleteBA(struct ieee80211_device *ieee, struct rx_ts_record *pRxTs)
72 {
73 struct ba_record *pBa = &pRxTs->rx_admitted_ba_record;
74 u8 bSendDELBA = false;
75
76 if (pBa->valid) {
77 DeActivateBAEntry(ieee, pBa);
78 bSendDELBA = true;
79 }
80
81 return bSendDELBA;
82 }
83
84 /********************************************************************************************************************
85 *function: reset BA entry
86 * input:
87 * struct ba_record *pBA //entry to be reset
88 * output: none
89 ********************************************************************************************************************/
ResetBaEntry(struct ba_record * pBA)90 void ResetBaEntry(struct ba_record *pBA)
91 {
92 pBA->valid = false;
93 pBA->param_set.short_data = 0;
94 pBA->timeout_value = 0;
95 pBA->dialog_token = 0;
96 pBA->start_seq_ctrl.short_data = 0;
97 }
98 //These functions need porting here or not?
99 /*******************************************************************************************************************************
100 *function: construct ADDBAREQ and ADDBARSP frame here together.
101 * input: u8* Dst //ADDBA frame's destination
102 * struct ba_record *pBA //BA_RECORD entry which stores the necessary information for BA.
103 * u16 StatusCode //status code in RSP and I will use it to indicate whether it's RSP or REQ(will I?)
104 * u8 type //indicate whether it's RSP(ACT_ADDBARSP) ow REQ(ACT_ADDBAREQ)
105 * output: none
106 * return: sk_buff* skb //return constructed skb to xmit
107 *******************************************************************************************************************************/
ieee80211_ADDBA(struct ieee80211_device * ieee,u8 * Dst,struct ba_record * pBA,u16 StatusCode,u8 type)108 static struct sk_buff *ieee80211_ADDBA(struct ieee80211_device *ieee, u8 *Dst, struct ba_record *pBA, u16 StatusCode, u8 type)
109 {
110 struct sk_buff *skb = NULL;
111 struct rtl_80211_hdr_3addr *BAReq = NULL;
112 u8 *tag = NULL;
113 u16 len = ieee->tx_headroom + 9;
114 //category(1) + action field(1) + Dialog Token(1) + BA Parameter Set(2) + BA Timeout Value(2) + BA Start SeqCtrl(2)(or StatusCode(2))
115 IEEE80211_DEBUG(IEEE80211_DL_TRACE | IEEE80211_DL_BA, "========>%s(), frame(%d) sentd to:%pM, ieee->dev:%p\n", __func__, type, Dst, ieee->dev);
116 if (pBA == NULL) {
117 IEEE80211_DEBUG(IEEE80211_DL_ERR, "pBA is NULL\n");
118 return NULL;
119 }
120 skb = dev_alloc_skb(len + sizeof(struct rtl_80211_hdr_3addr)); //need to add something others? FIXME
121 if (!skb)
122 return NULL;
123
124 memset(skb->data, 0, sizeof(struct rtl_80211_hdr_3addr)); //I wonder whether it's necessary. Apparently kernel will not do it when alloc a skb.
125 skb_reserve(skb, ieee->tx_headroom);
126
127 BAReq = skb_put(skb, sizeof(struct rtl_80211_hdr_3addr));
128
129 memcpy(BAReq->addr1, Dst, ETH_ALEN);
130 memcpy(BAReq->addr2, ieee->dev->dev_addr, ETH_ALEN);
131
132 memcpy(BAReq->addr3, ieee->current_network.bssid, ETH_ALEN);
133
134 BAReq->frame_ctl = cpu_to_le16(IEEE80211_STYPE_MANAGE_ACT); //action frame
135
136 //tag += sizeof( struct rtl_80211_hdr_3addr); //move to action field
137 tag = skb_put(skb, 9);
138 *tag++ = ACT_CAT_BA;
139 *tag++ = type;
140 // Dialog Token
141 *tag++ = pBA->dialog_token;
142
143 if (ACT_ADDBARSP == type) {
144 // Status Code
145 netdev_info(ieee->dev, "=====>to send ADDBARSP\n");
146
147 put_unaligned_le16(StatusCode, tag);
148 tag += 2;
149 }
150 // BA Parameter Set
151
152 put_unaligned_le16(pBA->param_set.short_data, tag);
153 tag += 2;
154 // BA Timeout Value
155
156 put_unaligned_le16(pBA->timeout_value, tag);
157 tag += 2;
158
159 if (ACT_ADDBAREQ == type) {
160 // BA Start SeqCtrl
161 memcpy(tag, (u8 *)&(pBA->start_seq_ctrl), 2);
162 tag += 2;
163 }
164
165 IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA | IEEE80211_DL_BA, skb->data, skb->len);
166 return skb;
167 //return NULL;
168 }
169
170
171 /********************************************************************************************************************
172 *function: construct DELBA frame
173 * input: u8* dst //DELBA frame's destination
174 * struct ba_record *pBA //BA_RECORD entry which stores the necessary information for BA
175 * enum tr_select TxRxSelect //TX RX direction
176 * u16 ReasonCode //status code.
177 * output: none
178 * return: sk_buff* skb //return constructed skb to xmit
179 ********************************************************************************************************************/
ieee80211_DELBA(struct ieee80211_device * ieee,u8 * dst,struct ba_record * pBA,enum tr_select TxRxSelect,u16 ReasonCode)180 static struct sk_buff *ieee80211_DELBA(
181 struct ieee80211_device *ieee,
182 u8 *dst,
183 struct ba_record *pBA,
184 enum tr_select TxRxSelect,
185 u16 ReasonCode
186 )
187 {
188 union delba_param_set DelbaParamSet;
189 struct sk_buff *skb = NULL;
190 struct rtl_80211_hdr_3addr *Delba = NULL;
191 u8 *tag = NULL;
192 //len = head len + DELBA Parameter Set(2) + Reason Code(2)
193 u16 len = 6 + ieee->tx_headroom;
194
195 if (net_ratelimit())
196 IEEE80211_DEBUG(IEEE80211_DL_TRACE | IEEE80211_DL_BA,
197 "========>%s(), ReasonCode(%d) sentd to:%pM\n",
198 __func__, ReasonCode, dst);
199
200 memset(&DelbaParamSet, 0, 2);
201
202 DelbaParamSet.field.initiator = (TxRxSelect == TX_DIR) ? 1 : 0;
203 DelbaParamSet.field.tid = pBA->param_set.field.tid;
204
205 skb = dev_alloc_skb(len + sizeof(struct rtl_80211_hdr_3addr)); //need to add something others? FIXME
206 if (!skb)
207 return NULL;
208 // memset(skb->data, 0, len+sizeof( struct rtl_80211_hdr_3addr));
209 skb_reserve(skb, ieee->tx_headroom);
210
211 Delba = skb_put(skb, sizeof(struct rtl_80211_hdr_3addr));
212
213 memcpy(Delba->addr1, dst, ETH_ALEN);
214 memcpy(Delba->addr2, ieee->dev->dev_addr, ETH_ALEN);
215 memcpy(Delba->addr3, ieee->current_network.bssid, ETH_ALEN);
216 Delba->frame_ctl = cpu_to_le16(IEEE80211_STYPE_MANAGE_ACT); //action frame
217
218 tag = skb_put(skb, 6);
219
220 *tag++ = ACT_CAT_BA;
221 *tag++ = ACT_DELBA;
222
223 // DELBA Parameter Set
224
225 put_unaligned_le16(DelbaParamSet.short_data, tag);
226 tag += 2;
227 // Reason Code
228
229 put_unaligned_le16(ReasonCode, tag);
230 tag += 2;
231
232 IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA | IEEE80211_DL_BA, skb->data, skb->len);
233 if (net_ratelimit())
234 IEEE80211_DEBUG(IEEE80211_DL_TRACE | IEEE80211_DL_BA,
235 "<=====%s()\n", __func__);
236 return skb;
237 }
238
239 /********************************************************************************************************************
240 *function: send ADDBAReq frame out
241 * input: u8* dst //ADDBAReq frame's destination
242 * struct ba_record *pBA //BA_RECORD entry which stores the necessary information for BA
243 * output: none
244 * notice: If any possible, please hide pBA in ieee. And temporarily use Manage Queue as softmac_mgmt_xmit() usually does
245 ********************************************************************************************************************/
ieee80211_send_ADDBAReq(struct ieee80211_device * ieee,u8 * dst,struct ba_record * pBA)246 static void ieee80211_send_ADDBAReq(struct ieee80211_device *ieee,
247 u8 *dst, struct ba_record *pBA)
248 {
249 struct sk_buff *skb;
250 skb = ieee80211_ADDBA(ieee, dst, pBA, 0, ACT_ADDBAREQ); //construct ACT_ADDBAREQ frames so set statuscode zero.
251
252 if (skb) {
253 softmac_mgmt_xmit(skb, ieee);
254 //add statistic needed here.
255 //and skb will be freed in softmac_mgmt_xmit(), so omit all dev_kfree_skb_any() outside softmac_mgmt_xmit()
256 //WB
257 } else {
258 IEEE80211_DEBUG(IEEE80211_DL_ERR, "alloc skb error in function %s()\n", __func__);
259 }
260 }
261
262 /********************************************************************************************************************
263 *function: send ADDBARSP frame out
264 * input: u8* dst //DELBA frame's destination
265 * struct ba_record *pBA //BA_RECORD entry which stores the necessary information for BA
266 * u16 StatusCode //RSP StatusCode
267 * output: none
268 * notice: If any possible, please hide pBA in ieee. And temporarily use Manage Queue as softmac_mgmt_xmit() usually does
269 ********************************************************************************************************************/
ieee80211_send_ADDBARsp(struct ieee80211_device * ieee,u8 * dst,struct ba_record * pBA,u16 StatusCode)270 static void ieee80211_send_ADDBARsp(struct ieee80211_device *ieee, u8 *dst,
271 struct ba_record *pBA, u16 StatusCode)
272 {
273 struct sk_buff *skb;
274 skb = ieee80211_ADDBA(ieee, dst, pBA, StatusCode, ACT_ADDBARSP); //construct ACT_ADDBARSP frames
275 if (skb) {
276 softmac_mgmt_xmit(skb, ieee);
277 //same above
278 } else {
279 IEEE80211_DEBUG(IEEE80211_DL_ERR, "alloc skb error in function %s()\n", __func__);
280 }
281
282 return;
283
284 }
285 /********************************************************************************************************************
286 *function: send ADDBARSP frame out
287 * input: u8* dst //DELBA frame's destination
288 * struct ba_record *pBA //BA_RECORD entry which stores the necessary information for BA
289 * enum tr_select TxRxSelect //TX or RX
290 * u16 ReasonCode //DEL ReasonCode
291 * output: none
292 * notice: If any possible, please hide pBA in ieee. And temporarily use Manage Queue as softmac_mgmt_xmit() usually does
293 ********************************************************************************************************************/
294
ieee80211_send_DELBA(struct ieee80211_device * ieee,u8 * dst,struct ba_record * pBA,enum tr_select TxRxSelect,u16 ReasonCode)295 static void ieee80211_send_DELBA(struct ieee80211_device *ieee, u8 *dst,
296 struct ba_record *pBA, enum tr_select TxRxSelect,
297 u16 ReasonCode)
298 {
299 struct sk_buff *skb;
300 skb = ieee80211_DELBA(ieee, dst, pBA, TxRxSelect, ReasonCode); //construct ACT_ADDBARSP frames
301 if (skb) {
302 softmac_mgmt_xmit(skb, ieee);
303 //same above
304 } else {
305 IEEE80211_DEBUG(IEEE80211_DL_ERR, "alloc skb error in function %s()\n", __func__);
306 }
307 }
308
309 /********************************************************************************************************************
310 *function: RX ADDBAReq
311 * input: struct sk_buff * skb //incoming ADDBAReq skb.
312 * return: 0(pass), other(fail)
313 * notice: As this function need support of QOS, I comment some code out. And when qos is ready, this code need to be support.
314 ********************************************************************************************************************/
ieee80211_rx_ADDBAReq(struct ieee80211_device * ieee,struct sk_buff * skb)315 int ieee80211_rx_ADDBAReq(struct ieee80211_device *ieee, struct sk_buff *skb)
316 {
317 struct rtl_80211_hdr_3addr *req = NULL;
318 u16 rc = 0;
319 u8 *dst = NULL, *pDialogToken = NULL, *tag = NULL;
320 struct ba_record *pBA = NULL;
321 union ba_param_set *pBaParamSet = NULL;
322 u16 *pBaTimeoutVal = NULL;
323 union sequence_control *pBaStartSeqCtrl = NULL;
324 struct rx_ts_record *pTS = NULL;
325
326 if (skb->len < sizeof(struct rtl_80211_hdr_3addr) + 9) {
327 IEEE80211_DEBUG(IEEE80211_DL_ERR,
328 " Invalid skb len in BAREQ(%d / %zu)\n",
329 skb->len,
330 (sizeof(struct rtl_80211_hdr_3addr) + 9));
331 return -1;
332 }
333
334 IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA | IEEE80211_DL_BA, skb->data, skb->len);
335
336 req = (struct rtl_80211_hdr_3addr *)skb->data;
337 tag = (u8 *)req;
338 dst = &req->addr2[0];
339 tag += sizeof(struct rtl_80211_hdr_3addr);
340 pDialogToken = tag + 2; //category+action
341 pBaParamSet = (union ba_param_set *)(tag + 3); //+DialogToken
342 pBaTimeoutVal = (u16 *)(tag + 5);
343 pBaStartSeqCtrl = (union sequence_control *)(req + 7);
344
345 netdev_info(ieee->dev, "====================>rx ADDBAREQ from :%pM\n", dst);
346 //some other capability is not ready now.
347 if ((ieee->current_network.qos_data.active == 0) ||
348 (!ieee->pHTInfo->bCurrentHTSupport)) //||
349 // (!ieee->pStaQos->bEnableRxImmBA) )
350 {
351 rc = ADDBA_STATUS_REFUSED;
352 IEEE80211_DEBUG(IEEE80211_DL_ERR, "Failed to reply on ADDBA_REQ as some capability is not ready(%d, %d)\n", ieee->current_network.qos_data.active, ieee->pHTInfo->bCurrentHTSupport);
353 goto OnADDBAReq_Fail;
354 }
355 // Search for related traffic stream.
356 // If there is no matched TS, reject the ADDBA request.
357 if (!GetTs(
358 ieee,
359 (struct ts_common_info **)(&pTS),
360 dst,
361 (u8)(pBaParamSet->field.tid),
362 RX_DIR,
363 true)) {
364 rc = ADDBA_STATUS_REFUSED;
365 IEEE80211_DEBUG(IEEE80211_DL_ERR, "can't get TS in %s()\n", __func__);
366 goto OnADDBAReq_Fail;
367 }
368 pBA = &pTS->rx_admitted_ba_record;
369 // To Determine the ADDBA Req content
370 // We can do much more check here, including buffer_size, AMSDU_Support, Policy, StartSeqCtrl...
371 // I want to check StartSeqCtrl to make sure when we start aggregation!!!
372 //
373 if (pBaParamSet->field.ba_policy == BA_POLICY_DELAYED) {
374 rc = ADDBA_STATUS_INVALID_PARAM;
375 IEEE80211_DEBUG(IEEE80211_DL_ERR, "BA Policy is not correct in %s()\n", __func__);
376 goto OnADDBAReq_Fail;
377 }
378 // Admit the ADDBA Request
379 //
380 DeActivateBAEntry(ieee, pBA);
381 pBA->dialog_token = *pDialogToken;
382 pBA->param_set = *pBaParamSet;
383 pBA->timeout_value = *pBaTimeoutVal;
384 pBA->start_seq_ctrl = *pBaStartSeqCtrl;
385 //for half N mode we only aggregate 1 frame
386 if (ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev))
387 pBA->param_set.field.buffer_size = 1;
388 else
389 pBA->param_set.field.buffer_size = 32;
390 ActivateBAEntry(ieee, pBA, pBA->timeout_value);
391 ieee80211_send_ADDBARsp(ieee, dst, pBA, ADDBA_STATUS_SUCCESS);
392
393 // End of procedure.
394 return 0;
395
396 OnADDBAReq_Fail:
397 {
398 struct ba_record BA;
399 BA.param_set = *pBaParamSet;
400 BA.timeout_value = *pBaTimeoutVal;
401 BA.dialog_token = *pDialogToken;
402 BA.param_set.field.ba_policy = BA_POLICY_IMMEDIATE;
403 ieee80211_send_ADDBARsp(ieee, dst, &BA, rc);
404 return 0; //we send RSP out.
405 }
406
407 }
408
409 /********************************************************************************************************************
410 *function: RX ADDBARSP
411 * input: struct sk_buff * skb //incoming ADDBAReq skb.
412 * return: 0(pass), other(fail)
413 * notice: As this function need support of QOS, I comment some code out. And when qos is ready, this code need to be support.
414 ********************************************************************************************************************/
ieee80211_rx_ADDBARsp(struct ieee80211_device * ieee,struct sk_buff * skb)415 int ieee80211_rx_ADDBARsp(struct ieee80211_device *ieee, struct sk_buff *skb)
416 {
417 struct rtl_80211_hdr_3addr *rsp = NULL;
418 struct ba_record *pPendingBA, *pAdmittedBA;
419 struct tx_ts_record *pTS = NULL;
420 u8 *dst = NULL, *pDialogToken = NULL, *tag = NULL;
421 u16 *pStatusCode = NULL, *pBaTimeoutVal = NULL;
422 union ba_param_set *pBaParamSet = NULL;
423 u16 ReasonCode;
424
425 if (skb->len < sizeof(struct rtl_80211_hdr_3addr) + 9) {
426 IEEE80211_DEBUG(IEEE80211_DL_ERR,
427 " Invalid skb len in BARSP(%d / %zu)\n",
428 skb->len,
429 (sizeof(struct rtl_80211_hdr_3addr) + 9));
430 return -1;
431 }
432 rsp = (struct rtl_80211_hdr_3addr *)skb->data;
433 tag = (u8 *)rsp;
434 dst = &rsp->addr2[0];
435 tag += sizeof(struct rtl_80211_hdr_3addr);
436 pDialogToken = tag + 2;
437 pStatusCode = (u16 *)(tag + 3);
438 pBaParamSet = (union ba_param_set *)(tag + 5);
439 pBaTimeoutVal = (u16 *)(tag + 7);
440
441 // Check the capability
442 // Since we can always receive A-MPDU, we just check if it is under HT mode.
443 if (ieee->current_network.qos_data.active == 0 ||
444 !ieee->pHTInfo->bCurrentHTSupport ||
445 !ieee->pHTInfo->bCurrentAMPDUEnable) {
446 IEEE80211_DEBUG(IEEE80211_DL_ERR, "reject to ADDBA_RSP as some capability is not ready(%d, %d, %d)\n", ieee->current_network.qos_data.active, ieee->pHTInfo->bCurrentHTSupport, ieee->pHTInfo->bCurrentAMPDUEnable);
447 ReasonCode = DELBA_REASON_UNKNOWN_BA;
448 goto OnADDBARsp_Reject;
449 }
450
451
452 //
453 // Search for related TS.
454 // If there is no TS found, we wil reject ADDBA Rsp by sending DELBA frame.
455 //
456 if (!GetTs(
457 ieee,
458 (struct ts_common_info **)(&pTS),
459 dst,
460 (u8)(pBaParamSet->field.tid),
461 TX_DIR,
462 false)) {
463 IEEE80211_DEBUG(IEEE80211_DL_ERR, "can't get TS in %s()\n", __func__);
464 ReasonCode = DELBA_REASON_UNKNOWN_BA;
465 goto OnADDBARsp_Reject;
466 }
467
468 pTS->add_ba_req_in_progress = false;
469 pPendingBA = &pTS->tx_pending_ba_record;
470 pAdmittedBA = &pTS->tx_admitted_ba_record;
471
472
473 //
474 // Check if related BA is waiting for setup.
475 // If not, reject by sending DELBA frame.
476 //
477 if (pAdmittedBA->valid) {
478 // Since BA is already setup, we ignore all other ADDBA Response.
479 IEEE80211_DEBUG(IEEE80211_DL_BA, "OnADDBARsp(): Recv ADDBA Rsp. Drop because already admit it! \n");
480 return -1;
481 } else if ((!pPendingBA->valid) || (*pDialogToken != pPendingBA->dialog_token)) {
482 IEEE80211_DEBUG(IEEE80211_DL_ERR, "OnADDBARsp(): Recv ADDBA Rsp. BA invalid, DELBA! \n");
483 ReasonCode = DELBA_REASON_UNKNOWN_BA;
484 goto OnADDBARsp_Reject;
485 } else {
486 IEEE80211_DEBUG(IEEE80211_DL_BA, "OnADDBARsp(): Recv ADDBA Rsp. BA is admitted! Status code:%X\n", *pStatusCode);
487 DeActivateBAEntry(ieee, pPendingBA);
488 }
489
490
491 if (*pStatusCode == ADDBA_STATUS_SUCCESS) {
492 //
493 // Determine ADDBA Rsp content here.
494 // We can compare the value of BA parameter set that Peer returned and Self sent.
495 // If it is OK, then admitted. Or we can send DELBA to cancel BA mechanism.
496 //
497 if (pBaParamSet->field.ba_policy == BA_POLICY_DELAYED) {
498 // Since this is a kind of ADDBA failed, we delay next ADDBA process.
499 pTS->add_ba_req_delayed = true;
500 DeActivateBAEntry(ieee, pAdmittedBA);
501 ReasonCode = DELBA_REASON_END_BA;
502 goto OnADDBARsp_Reject;
503 }
504
505
506 //
507 // Admitted condition
508 //
509 pAdmittedBA->dialog_token = *pDialogToken;
510 pAdmittedBA->timeout_value = *pBaTimeoutVal;
511 pAdmittedBA->start_seq_ctrl = pPendingBA->start_seq_ctrl;
512 pAdmittedBA->param_set = *pBaParamSet;
513 DeActivateBAEntry(ieee, pAdmittedBA);
514 ActivateBAEntry(ieee, pAdmittedBA, *pBaTimeoutVal);
515 } else {
516 // Delay next ADDBA process.
517 pTS->add_ba_req_delayed = true;
518 }
519
520 // End of procedure
521 return 0;
522
523 OnADDBARsp_Reject:
524 {
525 struct ba_record BA;
526 BA.param_set = *pBaParamSet;
527 ieee80211_send_DELBA(ieee, dst, &BA, TX_DIR, ReasonCode);
528 return 0;
529 }
530
531 }
532
533 /********************************************************************************************************************
534 *function: RX DELBA
535 * input: struct sk_buff * skb //incoming ADDBAReq skb.
536 * return: 0(pass), other(fail)
537 * notice: As this function need support of QOS, I comment some code out. And when qos is ready, this code need to be support.
538 ********************************************************************************************************************/
ieee80211_rx_DELBA(struct ieee80211_device * ieee,struct sk_buff * skb)539 int ieee80211_rx_DELBA(struct ieee80211_device *ieee, struct sk_buff *skb)
540 {
541 struct rtl_80211_hdr_3addr *delba = NULL;
542 union delba_param_set *pDelBaParamSet = NULL;
543 u8 *dst = NULL;
544
545 if (skb->len < sizeof(struct rtl_80211_hdr_3addr) + 6) {
546 IEEE80211_DEBUG(IEEE80211_DL_ERR,
547 " Invalid skb len in DELBA(%d / %zu)\n",
548 skb->len,
549 (sizeof(struct rtl_80211_hdr_3addr) + 6));
550 return -1;
551 }
552
553 if (ieee->current_network.qos_data.active == 0 ||
554 !ieee->pHTInfo->bCurrentHTSupport) {
555 IEEE80211_DEBUG(IEEE80211_DL_ERR, "received DELBA while QOS or HT is not supported(%d, %d)\n", ieee->current_network.qos_data.active, ieee->pHTInfo->bCurrentHTSupport);
556 return -1;
557 }
558
559 IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA | IEEE80211_DL_BA, skb->data, skb->len);
560 delba = (struct rtl_80211_hdr_3addr *)skb->data;
561 dst = &delba->addr2[0];
562 pDelBaParamSet = (union delba_param_set *)&delba->payload[2];
563
564 if (pDelBaParamSet->field.initiator == 1) {
565 struct rx_ts_record *pRxTs;
566
567 if (!GetTs(
568 ieee,
569 (struct ts_common_info **)&pRxTs,
570 dst,
571 (u8)pDelBaParamSet->field.tid,
572 RX_DIR,
573 false)) {
574 IEEE80211_DEBUG(IEEE80211_DL_ERR, "can't get TS for RXTS in %s()\n", __func__);
575 return -1;
576 }
577
578 RxTsDeleteBA(ieee, pRxTs);
579 } else {
580 struct tx_ts_record *pTxTs;
581
582 if (!GetTs(
583 ieee,
584 (struct ts_common_info **)&pTxTs,
585 dst,
586 (u8)pDelBaParamSet->field.tid,
587 TX_DIR,
588 false)) {
589 IEEE80211_DEBUG(IEEE80211_DL_ERR, "can't get TS for TXTS in %s()\n", __func__);
590 return -1;
591 }
592
593 pTxTs->using_ba = false;
594 pTxTs->add_ba_req_in_progress = false;
595 pTxTs->add_ba_req_delayed = false;
596 del_timer_sync(&pTxTs->ts_add_ba_timer);
597 //PlatformCancelTimer(Adapter, &pTxTs->ts_add_ba_timer);
598 TxTsDeleteBA(ieee, pTxTs);
599 }
600 return 0;
601 }
602
603 //
604 // ADDBA initiate. This can only be called by TX side.
605 //
606 void
TsInitAddBA(struct ieee80211_device * ieee,struct tx_ts_record * pTS,u8 Policy,u8 bOverwritePending)607 TsInitAddBA(
608 struct ieee80211_device *ieee,
609 struct tx_ts_record *pTS,
610 u8 Policy,
611 u8 bOverwritePending
612 )
613 {
614 struct ba_record *pBA = &pTS->tx_pending_ba_record;
615
616 if (pBA->valid && !bOverwritePending)
617 return;
618
619 // Set parameters to "Pending" variable set
620 DeActivateBAEntry(ieee, pBA);
621
622 pBA->dialog_token++; // DialogToken: Only keep the latest dialog token
623 pBA->param_set.field.amsdu_support = 0; // Do not support A-MSDU with A-MPDU now!!
624 pBA->param_set.field.ba_policy = Policy; // Policy: Delayed or Immediate
625 pBA->param_set.field.tid = pTS->ts_common_info.t_spec.ts_info.uc_tsid; // TID
626 // buffer_size: This need to be set according to A-MPDU vector
627 pBA->param_set.field.buffer_size = 32; // buffer_size: This need to be set according to A-MPDU vector
628 pBA->timeout_value = 0; // Timeout value: Set 0 to disable Timer
629 pBA->start_seq_ctrl.field.seq_num = (pTS->tx_cur_seq + 3) % 4096; // Block Ack will start after 3 packets later.
630
631 ActivateBAEntry(ieee, pBA, BA_SETUP_TIMEOUT);
632
633 ieee80211_send_ADDBAReq(ieee, pTS->ts_common_info.addr, pBA);
634 }
635
636 void
TsInitDelBA(struct ieee80211_device * ieee,struct ts_common_info * pTsCommonInfo,enum tr_select TxRxSelect)637 TsInitDelBA(struct ieee80211_device *ieee, struct ts_common_info *pTsCommonInfo, enum tr_select TxRxSelect)
638 {
639 if (TxRxSelect == TX_DIR) {
640 struct tx_ts_record *pTxTs = (struct tx_ts_record *)pTsCommonInfo;
641
642 if (TxTsDeleteBA(ieee, pTxTs))
643 ieee80211_send_DELBA(
644 ieee,
645 pTsCommonInfo->addr,
646 (pTxTs->tx_admitted_ba_record.valid) ? (&pTxTs->tx_admitted_ba_record) : (&pTxTs->tx_pending_ba_record),
647 TxRxSelect,
648 DELBA_REASON_END_BA);
649 } else if (TxRxSelect == RX_DIR) {
650 struct rx_ts_record *pRxTs = (struct rx_ts_record *)pTsCommonInfo;
651 if (RxTsDeleteBA(ieee, pRxTs))
652 ieee80211_send_DELBA(
653 ieee,
654 pTsCommonInfo->addr,
655 &pRxTs->rx_admitted_ba_record,
656 TxRxSelect,
657 DELBA_REASON_END_BA);
658 }
659 }
660 /********************************************************************************************************************
661 *function: BA setup timer
662 * input: unsigned long data //acturally we send struct tx_ts_record or struct rx_ts_record to these timer
663 * return: NULL
664 * notice:
665 ********************************************************************************************************************/
BaSetupTimeOut(struct timer_list * t)666 void BaSetupTimeOut(struct timer_list *t)
667 {
668 struct tx_ts_record *pTxTs = from_timer(pTxTs, t, tx_pending_ba_record.timer);
669
670 pTxTs->add_ba_req_in_progress = false;
671 pTxTs->add_ba_req_delayed = true;
672 pTxTs->tx_pending_ba_record.valid = false;
673 }
674
TxBaInactTimeout(struct timer_list * t)675 void TxBaInactTimeout(struct timer_list *t)
676 {
677 struct tx_ts_record *pTxTs = from_timer(pTxTs, t, tx_admitted_ba_record.timer);
678 struct ieee80211_device *ieee = container_of(pTxTs, struct ieee80211_device, TxTsRecord[pTxTs->num]);
679 TxTsDeleteBA(ieee, pTxTs);
680 ieee80211_send_DELBA(
681 ieee,
682 pTxTs->ts_common_info.addr,
683 &pTxTs->tx_admitted_ba_record,
684 TX_DIR,
685 DELBA_REASON_TIMEOUT);
686 }
687
RxBaInactTimeout(struct timer_list * t)688 void RxBaInactTimeout(struct timer_list *t)
689 {
690 struct rx_ts_record *pRxTs = from_timer(pRxTs, t, rx_admitted_ba_record.timer);
691 struct ieee80211_device *ieee = container_of(pRxTs, struct ieee80211_device, RxTsRecord[pRxTs->num]);
692
693 RxTsDeleteBA(ieee, pRxTs);
694 ieee80211_send_DELBA(
695 ieee,
696 pRxTs->ts_common_info.addr,
697 &pRxTs->rx_admitted_ba_record,
698 RX_DIR,
699 DELBA_REASON_TIMEOUT);
700 }
701
