1 /*
2  * Copyright (c) 2006 Dave Airlie <airlied@linux.ie>
3  * Copyright (c) 2007-2008 Intel Corporation
4  *   Jesse Barnes <jesse.barnes@intel.com>
5  *
6  * Permission is hereby granted, free of charge, to any person obtaining a
7  * copy of this software and associated documentation files (the "Software"),
8  * to deal in the Software without restriction, including without limitation
9  * the rights to use, copy, modify, merge, publish, distribute, sublicense,
10  * and/or sell copies of the Software, and to permit persons to whom the
11  * Software is furnished to do so, subject to the following conditions:
12  *
13  * The above copyright notice and this permission notice (including the next
14  * paragraph) shall be included in all copies or substantial portions of the
15  * Software.
16  *
17  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
18  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
19  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
20  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
21  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
22  * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
23  * IN THE SOFTWARE.
24  */
25 
26 #ifndef __INTEL_DISPLAY_TYPES_H__
27 #define __INTEL_DISPLAY_TYPES_H__
28 
29 #include <linux/async.h>
30 #include <linux/i2c.h>
31 #include <linux/sched/clock.h>
32 
33 #include <drm/drm_atomic.h>
34 #include <drm/drm_crtc.h>
35 #include <drm/drm_dp_dual_mode_helper.h>
36 #include <drm/drm_dp_mst_helper.h>
37 #include <drm/drm_encoder.h>
38 #include <drm/drm_fb_helper.h>
39 #include <drm/drm_probe_helper.h>
40 #include <drm/drm_rect.h>
41 #include <drm/drm_vblank.h>
42 #include <drm/i915_drm.h>
43 #include <drm/i915_mei_hdcp_interface.h>
44 #include <media/cec-notifier.h>
45 
46 #include "i915_drv.h"
47 
48 struct drm_printer;
49 
50 /*
51  * Display related stuff
52  */
53 
54 /* these are outputs from the chip - integrated only
55    external chips are via DVO or SDVO output */
56 enum intel_output_type {
57 	INTEL_OUTPUT_UNUSED = 0,
58 	INTEL_OUTPUT_ANALOG = 1,
59 	INTEL_OUTPUT_DVO = 2,
60 	INTEL_OUTPUT_SDVO = 3,
61 	INTEL_OUTPUT_LVDS = 4,
62 	INTEL_OUTPUT_TVOUT = 5,
63 	INTEL_OUTPUT_HDMI = 6,
64 	INTEL_OUTPUT_DP = 7,
65 	INTEL_OUTPUT_EDP = 8,
66 	INTEL_OUTPUT_DSI = 9,
67 	INTEL_OUTPUT_DDI = 10,
68 	INTEL_OUTPUT_DP_MST = 11,
69 };
70 
71 enum hdmi_force_audio {
72 	HDMI_AUDIO_OFF_DVI = -2,	/* no aux data for HDMI-DVI converter */
73 	HDMI_AUDIO_OFF,			/* force turn off HDMI audio */
74 	HDMI_AUDIO_AUTO,		/* trust EDID */
75 	HDMI_AUDIO_ON,			/* force turn on HDMI audio */
76 };
77 
78 /* "Broadcast RGB" property */
79 enum intel_broadcast_rgb {
80 	INTEL_BROADCAST_RGB_AUTO,
81 	INTEL_BROADCAST_RGB_FULL,
82 	INTEL_BROADCAST_RGB_LIMITED,
83 };
84 
85 struct intel_framebuffer {
86 	struct drm_framebuffer base;
87 	struct intel_frontbuffer *frontbuffer;
88 	struct intel_rotation_info rot_info;
89 
90 	/* for each plane in the normal GTT view */
91 	struct {
92 		unsigned int x, y;
93 	} normal[2];
94 	/* for each plane in the rotated GTT view */
95 	struct {
96 		unsigned int x, y;
97 		unsigned int pitch; /* pixels */
98 	} rotated[2];
99 };
100 
101 struct intel_fbdev {
102 	struct drm_fb_helper helper;
103 	struct intel_framebuffer *fb;
104 	struct i915_vma *vma;
105 	unsigned long vma_flags;
106 	async_cookie_t cookie;
107 	int preferred_bpp;
108 
109 	/* Whether or not fbdev hpd processing is temporarily suspended */
110 	bool hpd_suspended : 1;
111 	/* Set when a hotplug was received while HPD processing was
112 	 * suspended
113 	 */
114 	bool hpd_waiting : 1;
115 
116 	/* Protects hpd_suspended */
117 	struct mutex hpd_lock;
118 };
119 
120 enum intel_hotplug_state {
121 	INTEL_HOTPLUG_UNCHANGED,
122 	INTEL_HOTPLUG_CHANGED,
123 	INTEL_HOTPLUG_RETRY,
124 };
125 
126 struct intel_encoder {
127 	struct drm_encoder base;
128 
129 	enum intel_output_type type;
130 	enum port port;
131 	unsigned int cloneable;
132 	enum intel_hotplug_state (*hotplug)(struct intel_encoder *encoder,
133 					    struct intel_connector *connector,
134 					    bool irq_received);
135 	enum intel_output_type (*compute_output_type)(struct intel_encoder *,
136 						      struct intel_crtc_state *,
137 						      struct drm_connector_state *);
138 	int (*compute_config)(struct intel_encoder *,
139 			      struct intel_crtc_state *,
140 			      struct drm_connector_state *);
141 	void (*update_prepare)(struct intel_atomic_state *,
142 			       struct intel_encoder *,
143 			       struct intel_crtc *);
144 	void (*pre_pll_enable)(struct intel_encoder *,
145 			       const struct intel_crtc_state *,
146 			       const struct drm_connector_state *);
147 	void (*pre_enable)(struct intel_encoder *,
148 			   const struct intel_crtc_state *,
149 			   const struct drm_connector_state *);
150 	void (*enable)(struct intel_encoder *,
151 		       const struct intel_crtc_state *,
152 		       const struct drm_connector_state *);
153 	void (*update_complete)(struct intel_atomic_state *,
154 				struct intel_encoder *,
155 				struct intel_crtc *);
156 	void (*disable)(struct intel_encoder *,
157 			const struct intel_crtc_state *,
158 			const struct drm_connector_state *);
159 	void (*post_disable)(struct intel_encoder *,
160 			     const struct intel_crtc_state *,
161 			     const struct drm_connector_state *);
162 	void (*post_pll_disable)(struct intel_encoder *,
163 				 const struct intel_crtc_state *,
164 				 const struct drm_connector_state *);
165 	void (*update_pipe)(struct intel_encoder *,
166 			    const struct intel_crtc_state *,
167 			    const struct drm_connector_state *);
168 	/* Read out the current hw state of this connector, returning true if
169 	 * the encoder is active. If the encoder is enabled it also set the pipe
170 	 * it is connected to in the pipe parameter. */
171 	bool (*get_hw_state)(struct intel_encoder *, enum pipe *pipe);
172 	/* Reconstructs the equivalent mode flags for the current hardware
173 	 * state. This must be called _after_ display->get_pipe_config has
174 	 * pre-filled the pipe config. Note that intel_encoder->base.crtc must
175 	 * be set correctly before calling this function. */
176 	void (*get_config)(struct intel_encoder *,
177 			   struct intel_crtc_state *pipe_config);
178 	/*
179 	 * Acquires the power domains needed for an active encoder during
180 	 * hardware state readout.
181 	 */
182 	void (*get_power_domains)(struct intel_encoder *encoder,
183 				  struct intel_crtc_state *crtc_state);
184 	/*
185 	 * Called during system suspend after all pending requests for the
186 	 * encoder are flushed (for example for DP AUX transactions) and
187 	 * device interrupts are disabled.
188 	 */
189 	void (*suspend)(struct intel_encoder *);
190 	int crtc_mask;
191 	enum hpd_pin hpd_pin;
192 	enum intel_display_power_domain power_domain;
193 	/* for communication with audio component; protected by av_mutex */
194 	const struct drm_connector *audio_connector;
195 };
196 
197 struct intel_panel {
198 	struct drm_display_mode *fixed_mode;
199 	struct drm_display_mode *downclock_mode;
200 
201 	/* backlight */
202 	struct {
203 		bool present;
204 		u32 level;
205 		u32 min;
206 		u32 max;
207 		bool enabled;
208 		bool combination_mode;	/* gen 2/4 only */
209 		bool active_low_pwm;
210 		bool alternate_pwm_increment;	/* lpt+ */
211 
212 		/* PWM chip */
213 		bool util_pin_active_low;	/* bxt+ */
214 		u8 controller;		/* bxt+ only */
215 		struct pwm_device *pwm;
216 
217 		struct backlight_device *device;
218 
219 		/* Connector and platform specific backlight functions */
220 		int (*setup)(struct intel_connector *connector, enum pipe pipe);
221 		u32 (*get)(struct intel_connector *connector);
222 		void (*set)(const struct drm_connector_state *conn_state, u32 level);
223 		void (*disable)(const struct drm_connector_state *conn_state);
224 		void (*enable)(const struct intel_crtc_state *crtc_state,
225 			       const struct drm_connector_state *conn_state);
226 		u32 (*hz_to_pwm)(struct intel_connector *connector, u32 hz);
227 		void (*power)(struct intel_connector *, bool enable);
228 	} backlight;
229 };
230 
231 struct intel_digital_port;
232 
233 enum check_link_response {
234 	HDCP_LINK_PROTECTED	= 0,
235 	HDCP_TOPOLOGY_CHANGE,
236 	HDCP_LINK_INTEGRITY_FAILURE,
237 	HDCP_REAUTH_REQUEST
238 };
239 
240 /*
241  * This structure serves as a translation layer between the generic HDCP code
242  * and the bus-specific code. What that means is that HDCP over HDMI differs
243  * from HDCP over DP, so to account for these differences, we need to
244  * communicate with the receiver through this shim.
245  *
246  * For completeness, the 2 buses differ in the following ways:
247  *	- DP AUX vs. DDC
248  *		HDCP registers on the receiver are set via DP AUX for DP, and
249  *		they are set via DDC for HDMI.
250  *	- Receiver register offsets
251  *		The offsets of the registers are different for DP vs. HDMI
252  *	- Receiver register masks/offsets
253  *		For instance, the ready bit for the KSV fifo is in a different
254  *		place on DP vs HDMI
255  *	- Receiver register names
256  *		Seriously. In the DP spec, the 16-bit register containing
257  *		downstream information is called BINFO, on HDMI it's called
258  *		BSTATUS. To confuse matters further, DP has a BSTATUS register
259  *		with a completely different definition.
260  *	- KSV FIFO
261  *		On HDMI, the ksv fifo is read all at once, whereas on DP it must
262  *		be read 3 keys at a time
263  *	- Aksv output
264  *		Since Aksv is hidden in hardware, there's different procedures
265  *		to send it over DP AUX vs DDC
266  */
267 struct intel_hdcp_shim {
268 	/* Outputs the transmitter's An and Aksv values to the receiver. */
269 	int (*write_an_aksv)(struct intel_digital_port *intel_dig_port, u8 *an);
270 
271 	/* Reads the receiver's key selection vector */
272 	int (*read_bksv)(struct intel_digital_port *intel_dig_port, u8 *bksv);
273 
274 	/*
275 	 * Reads BINFO from DP receivers and BSTATUS from HDMI receivers. The
276 	 * definitions are the same in the respective specs, but the names are
277 	 * different. Call it BSTATUS since that's the name the HDMI spec
278 	 * uses and it was there first.
279 	 */
280 	int (*read_bstatus)(struct intel_digital_port *intel_dig_port,
281 			    u8 *bstatus);
282 
283 	/* Determines whether a repeater is present downstream */
284 	int (*repeater_present)(struct intel_digital_port *intel_dig_port,
285 				bool *repeater_present);
286 
287 	/* Reads the receiver's Ri' value */
288 	int (*read_ri_prime)(struct intel_digital_port *intel_dig_port, u8 *ri);
289 
290 	/* Determines if the receiver's KSV FIFO is ready for consumption */
291 	int (*read_ksv_ready)(struct intel_digital_port *intel_dig_port,
292 			      bool *ksv_ready);
293 
294 	/* Reads the ksv fifo for num_downstream devices */
295 	int (*read_ksv_fifo)(struct intel_digital_port *intel_dig_port,
296 			     int num_downstream, u8 *ksv_fifo);
297 
298 	/* Reads a 32-bit part of V' from the receiver */
299 	int (*read_v_prime_part)(struct intel_digital_port *intel_dig_port,
300 				 int i, u32 *part);
301 
302 	/* Enables HDCP signalling on the port */
303 	int (*toggle_signalling)(struct intel_digital_port *intel_dig_port,
304 				 bool enable);
305 
306 	/* Ensures the link is still protected */
307 	bool (*check_link)(struct intel_digital_port *intel_dig_port);
308 
309 	/* Detects panel's hdcp capability. This is optional for HDMI. */
310 	int (*hdcp_capable)(struct intel_digital_port *intel_dig_port,
311 			    bool *hdcp_capable);
312 
313 	/* HDCP adaptation(DP/HDMI) required on the port */
314 	enum hdcp_wired_protocol protocol;
315 
316 	/* Detects whether sink is HDCP2.2 capable */
317 	int (*hdcp_2_2_capable)(struct intel_digital_port *intel_dig_port,
318 				bool *capable);
319 
320 	/* Write HDCP2.2 messages */
321 	int (*write_2_2_msg)(struct intel_digital_port *intel_dig_port,
322 			     void *buf, size_t size);
323 
324 	/* Read HDCP2.2 messages */
325 	int (*read_2_2_msg)(struct intel_digital_port *intel_dig_port,
326 			    u8 msg_id, void *buf, size_t size);
327 
328 	/*
329 	 * Implementation of DP HDCP2.2 Errata for the communication of stream
330 	 * type to Receivers. In DP HDCP2.2 Stream type is one of the input to
331 	 * the HDCP2.2 Cipher for En/De-Cryption. Not applicable for HDMI.
332 	 */
333 	int (*config_stream_type)(struct intel_digital_port *intel_dig_port,
334 				  bool is_repeater, u8 type);
335 
336 	/* HDCP2.2 Link Integrity Check */
337 	int (*check_2_2_link)(struct intel_digital_port *intel_dig_port);
338 };
339 
340 struct intel_hdcp {
341 	const struct intel_hdcp_shim *shim;
342 	/* Mutex for hdcp state of the connector */
343 	struct mutex mutex;
344 	u64 value;
345 	struct delayed_work check_work;
346 	struct work_struct prop_work;
347 
348 	/* HDCP1.4 Encryption status */
349 	bool hdcp_encrypted;
350 
351 	/* HDCP2.2 related definitions */
352 	/* Flag indicates whether this connector supports HDCP2.2 or not. */
353 	bool hdcp2_supported;
354 
355 	/* HDCP2.2 Encryption status */
356 	bool hdcp2_encrypted;
357 
358 	/*
359 	 * Content Stream Type defined by content owner. TYPE0(0x0) content can
360 	 * flow in the link protected by HDCP2.2 or HDCP1.4, where as TYPE1(0x1)
361 	 * content can flow only through a link protected by HDCP2.2.
362 	 */
363 	u8 content_type;
364 	struct hdcp_port_data port_data;
365 
366 	bool is_paired;
367 	bool is_repeater;
368 
369 	/*
370 	 * Count of ReceiverID_List received. Initialized to 0 at AKE_INIT.
371 	 * Incremented after processing the RepeaterAuth_Send_ReceiverID_List.
372 	 * When it rolls over re-auth has to be triggered.
373 	 */
374 	u32 seq_num_v;
375 
376 	/*
377 	 * Count of RepeaterAuth_Stream_Manage msg propagated.
378 	 * Initialized to 0 on AKE_INIT. Incremented after every successful
379 	 * transmission of RepeaterAuth_Stream_Manage message. When it rolls
380 	 * over re-Auth has to be triggered.
381 	 */
382 	u32 seq_num_m;
383 
384 	/*
385 	 * Work queue to signal the CP_IRQ. Used for the waiters to read the
386 	 * available information from HDCP DP sink.
387 	 */
388 	wait_queue_head_t cp_irq_queue;
389 	atomic_t cp_irq_count;
390 	int cp_irq_count_cached;
391 };
392 
393 struct intel_connector {
394 	struct drm_connector base;
395 	/*
396 	 * The fixed encoder this connector is connected to.
397 	 */
398 	struct intel_encoder *encoder;
399 
400 	/* ACPI device id for ACPI and driver cooperation */
401 	u32 acpi_device_id;
402 
403 	/* Reads out the current hw, returning true if the connector is enabled
404 	 * and active (i.e. dpms ON state). */
405 	bool (*get_hw_state)(struct intel_connector *);
406 
407 	/* Panel info for eDP and LVDS */
408 	struct intel_panel panel;
409 
410 	/* Cached EDID for eDP and LVDS. May hold ERR_PTR for invalid EDID. */
411 	struct edid *edid;
412 	struct edid *detect_edid;
413 
414 	/* since POLL and HPD connectors may use the same HPD line keep the native
415 	   state of connector->polled in case hotplug storm detection changes it */
416 	u8 polled;
417 
418 	void *port; /* store this opaque as its illegal to dereference it */
419 
420 	struct intel_dp *mst_port;
421 
422 	/* Work struct to schedule a uevent on link train failure */
423 	struct work_struct modeset_retry_work;
424 
425 	struct intel_hdcp hdcp;
426 };
427 
428 struct intel_digital_connector_state {
429 	struct drm_connector_state base;
430 
431 	enum hdmi_force_audio force_audio;
432 	int broadcast_rgb;
433 };
434 
435 #define to_intel_digital_connector_state(x) container_of(x, struct intel_digital_connector_state, base)
436 
437 struct dpll {
438 	/* given values */
439 	int n;
440 	int m1, m2;
441 	int p1, p2;
442 	/* derived values */
443 	int	dot;
444 	int	vco;
445 	int	m;
446 	int	p;
447 };
448 
449 struct intel_atomic_state {
450 	struct drm_atomic_state base;
451 
452 	intel_wakeref_t wakeref;
453 
454 	struct {
455 		/*
456 		 * Logical state of cdclk (used for all scaling, watermark,
457 		 * etc. calculations and checks). This is computed as if all
458 		 * enabled crtcs were active.
459 		 */
460 		struct intel_cdclk_state logical;
461 
462 		/*
463 		 * Actual state of cdclk, can be different from the logical
464 		 * state only when all crtc's are DPMS off.
465 		 */
466 		struct intel_cdclk_state actual;
467 
468 		int force_min_cdclk;
469 		bool force_min_cdclk_changed;
470 		/* pipe to which cd2x update is synchronized */
471 		enum pipe pipe;
472 	} cdclk;
473 
474 	bool dpll_set, modeset;
475 
476 	/*
477 	 * Does this transaction change the pipes that are active?  This mask
478 	 * tracks which CRTC's have changed their active state at the end of
479 	 * the transaction (not counting the temporary disable during modesets).
480 	 * This mask should only be non-zero when intel_state->modeset is true,
481 	 * but the converse is not necessarily true; simply changing a mode may
482 	 * not flip the final active status of any CRTC's
483 	 */
484 	unsigned int active_pipe_changes;
485 
486 	unsigned int active_crtcs;
487 	/* minimum acceptable cdclk for each pipe */
488 	int min_cdclk[I915_MAX_PIPES];
489 	/* minimum acceptable voltage level for each pipe */
490 	u8 min_voltage_level[I915_MAX_PIPES];
491 
492 	struct intel_shared_dpll_state shared_dpll[I915_NUM_PLLS];
493 
494 	/*
495 	 * Current watermarks can't be trusted during hardware readout, so
496 	 * don't bother calculating intermediate watermarks.
497 	 */
498 	bool skip_intermediate_wm;
499 
500 	bool rps_interactive;
501 
502 	/* Gen9+ only */
503 	struct skl_ddb_values wm_results;
504 
505 	struct i915_sw_fence commit_ready;
506 
507 	struct llist_node freed;
508 };
509 
510 struct intel_plane_state {
511 	struct drm_plane_state base;
512 	struct i915_ggtt_view view;
513 	struct i915_vma *vma;
514 	unsigned long flags;
515 #define PLANE_HAS_FENCE BIT(0)
516 
517 	struct {
518 		u32 offset;
519 		/*
520 		 * Plane stride in:
521 		 * bytes for 0/180 degree rotation
522 		 * pixels for 90/270 degree rotation
523 		 */
524 		u32 stride;
525 		int x, y;
526 	} color_plane[2];
527 
528 	/* plane control register */
529 	u32 ctl;
530 
531 	/* plane color control register */
532 	u32 color_ctl;
533 
534 	/*
535 	 * scaler_id
536 	 *    = -1 : not using a scaler
537 	 *    >=  0 : using a scalers
538 	 *
539 	 * plane requiring a scaler:
540 	 *   - During check_plane, its bit is set in
541 	 *     crtc_state->scaler_state.scaler_users by calling helper function
542 	 *     update_scaler_plane.
543 	 *   - scaler_id indicates the scaler it got assigned.
544 	 *
545 	 * plane doesn't require a scaler:
546 	 *   - this can happen when scaling is no more required or plane simply
547 	 *     got disabled.
548 	 *   - During check_plane, corresponding bit is reset in
549 	 *     crtc_state->scaler_state.scaler_users by calling helper function
550 	 *     update_scaler_plane.
551 	 */
552 	int scaler_id;
553 
554 	/*
555 	 * linked_plane:
556 	 *
557 	 * ICL planar formats require 2 planes that are updated as pairs.
558 	 * This member is used to make sure the other plane is also updated
559 	 * when required, and for update_slave() to find the correct
560 	 * plane_state to pass as argument.
561 	 */
562 	struct intel_plane *linked_plane;
563 
564 	/*
565 	 * slave:
566 	 * If set don't update use the linked plane's state for updating
567 	 * this plane during atomic commit with the update_slave() callback.
568 	 *
569 	 * It's also used by the watermark code to ignore wm calculations on
570 	 * this plane. They're calculated by the linked plane's wm code.
571 	 */
572 	u32 slave;
573 
574 	struct drm_intel_sprite_colorkey ckey;
575 };
576 
577 struct intel_initial_plane_config {
578 	struct intel_framebuffer *fb;
579 	unsigned int tiling;
580 	int size;
581 	u32 base;
582 	u8 rotation;
583 };
584 
585 struct intel_scaler {
586 	int in_use;
587 	u32 mode;
588 };
589 
590 struct intel_crtc_scaler_state {
591 #define SKL_NUM_SCALERS 2
592 	struct intel_scaler scalers[SKL_NUM_SCALERS];
593 
594 	/*
595 	 * scaler_users: keeps track of users requesting scalers on this crtc.
596 	 *
597 	 *     If a bit is set, a user is using a scaler.
598 	 *     Here user can be a plane or crtc as defined below:
599 	 *       bits 0-30 - plane (bit position is index from drm_plane_index)
600 	 *       bit 31    - crtc
601 	 *
602 	 * Instead of creating a new index to cover planes and crtc, using
603 	 * existing drm_plane_index for planes which is well less than 31
604 	 * planes and bit 31 for crtc. This should be fine to cover all
605 	 * our platforms.
606 	 *
607 	 * intel_atomic_setup_scalers will setup available scalers to users
608 	 * requesting scalers. It will gracefully fail if request exceeds
609 	 * avilability.
610 	 */
611 #define SKL_CRTC_INDEX 31
612 	unsigned scaler_users;
613 
614 	/* scaler used by crtc for panel fitting purpose */
615 	int scaler_id;
616 };
617 
618 /* drm_mode->private_flags */
619 #define I915_MODE_FLAG_INHERITED (1<<0)
620 /* Flag to get scanline using frame time stamps */
621 #define I915_MODE_FLAG_GET_SCANLINE_FROM_TIMESTAMP (1<<1)
622 /* Flag to use the scanline counter instead of the pixel counter */
623 #define I915_MODE_FLAG_USE_SCANLINE_COUNTER (1<<2)
624 
625 struct intel_pipe_wm {
626 	struct intel_wm_level wm[5];
627 	u32 linetime;
628 	bool fbc_wm_enabled;
629 	bool pipe_enabled;
630 	bool sprites_enabled;
631 	bool sprites_scaled;
632 };
633 
634 struct skl_plane_wm {
635 	struct skl_wm_level wm[8];
636 	struct skl_wm_level uv_wm[8];
637 	struct skl_wm_level trans_wm;
638 	bool is_planar;
639 };
640 
641 struct skl_pipe_wm {
642 	struct skl_plane_wm planes[I915_MAX_PLANES];
643 	u32 linetime;
644 };
645 
646 enum vlv_wm_level {
647 	VLV_WM_LEVEL_PM2,
648 	VLV_WM_LEVEL_PM5,
649 	VLV_WM_LEVEL_DDR_DVFS,
650 	NUM_VLV_WM_LEVELS,
651 };
652 
653 struct vlv_wm_state {
654 	struct g4x_pipe_wm wm[NUM_VLV_WM_LEVELS];
655 	struct g4x_sr_wm sr[NUM_VLV_WM_LEVELS];
656 	u8 num_levels;
657 	bool cxsr;
658 };
659 
660 struct vlv_fifo_state {
661 	u16 plane[I915_MAX_PLANES];
662 };
663 
664 enum g4x_wm_level {
665 	G4X_WM_LEVEL_NORMAL,
666 	G4X_WM_LEVEL_SR,
667 	G4X_WM_LEVEL_HPLL,
668 	NUM_G4X_WM_LEVELS,
669 };
670 
671 struct g4x_wm_state {
672 	struct g4x_pipe_wm wm;
673 	struct g4x_sr_wm sr;
674 	struct g4x_sr_wm hpll;
675 	bool cxsr;
676 	bool hpll_en;
677 	bool fbc_en;
678 };
679 
680 struct intel_crtc_wm_state {
681 	union {
682 		struct {
683 			/*
684 			 * Intermediate watermarks; these can be
685 			 * programmed immediately since they satisfy
686 			 * both the current configuration we're
687 			 * switching away from and the new
688 			 * configuration we're switching to.
689 			 */
690 			struct intel_pipe_wm intermediate;
691 
692 			/*
693 			 * Optimal watermarks, programmed post-vblank
694 			 * when this state is committed.
695 			 */
696 			struct intel_pipe_wm optimal;
697 		} ilk;
698 
699 		struct {
700 			/* gen9+ only needs 1-step wm programming */
701 			struct skl_pipe_wm optimal;
702 			struct skl_ddb_entry ddb;
703 			struct skl_ddb_entry plane_ddb_y[I915_MAX_PLANES];
704 			struct skl_ddb_entry plane_ddb_uv[I915_MAX_PLANES];
705 		} skl;
706 
707 		struct {
708 			/* "raw" watermarks (not inverted) */
709 			struct g4x_pipe_wm raw[NUM_VLV_WM_LEVELS];
710 			/* intermediate watermarks (inverted) */
711 			struct vlv_wm_state intermediate;
712 			/* optimal watermarks (inverted) */
713 			struct vlv_wm_state optimal;
714 			/* display FIFO split */
715 			struct vlv_fifo_state fifo_state;
716 		} vlv;
717 
718 		struct {
719 			/* "raw" watermarks */
720 			struct g4x_pipe_wm raw[NUM_G4X_WM_LEVELS];
721 			/* intermediate watermarks */
722 			struct g4x_wm_state intermediate;
723 			/* optimal watermarks */
724 			struct g4x_wm_state optimal;
725 		} g4x;
726 	};
727 
728 	/*
729 	 * Platforms with two-step watermark programming will need to
730 	 * update watermark programming post-vblank to switch from the
731 	 * safe intermediate watermarks to the optimal final
732 	 * watermarks.
733 	 */
734 	bool need_postvbl_update;
735 };
736 
737 enum intel_output_format {
738 	INTEL_OUTPUT_FORMAT_INVALID,
739 	INTEL_OUTPUT_FORMAT_RGB,
740 	INTEL_OUTPUT_FORMAT_YCBCR420,
741 	INTEL_OUTPUT_FORMAT_YCBCR444,
742 };
743 
744 struct intel_crtc_state {
745 	struct drm_crtc_state base;
746 
747 	/**
748 	 * quirks - bitfield with hw state readout quirks
749 	 *
750 	 * For various reasons the hw state readout code might not be able to
751 	 * completely faithfully read out the current state. These cases are
752 	 * tracked with quirk flags so that fastboot and state checker can act
753 	 * accordingly.
754 	 */
755 #define PIPE_CONFIG_QUIRK_MODE_SYNC_FLAGS	(1<<0) /* unreliable sync mode.flags */
756 	unsigned long quirks;
757 
758 	unsigned fb_bits; /* framebuffers to flip */
759 	bool update_pipe; /* can a fast modeset be performed? */
760 	bool disable_cxsr;
761 	bool update_wm_pre, update_wm_post; /* watermarks are updated */
762 	bool fb_changed; /* fb on any of the planes is changed */
763 	bool fifo_changed; /* FIFO split is changed */
764 	bool preload_luts;
765 
766 	/* Pipe source size (ie. panel fitter input size)
767 	 * All planes will be positioned inside this space,
768 	 * and get clipped at the edges. */
769 	int pipe_src_w, pipe_src_h;
770 
771 	/*
772 	 * Pipe pixel rate, adjusted for
773 	 * panel fitter/pipe scaler downscaling.
774 	 */
775 	unsigned int pixel_rate;
776 
777 	/* Whether to set up the PCH/FDI. Note that we never allow sharing
778 	 * between pch encoders and cpu encoders. */
779 	bool has_pch_encoder;
780 
781 	/* Are we sending infoframes on the attached port */
782 	bool has_infoframe;
783 
784 	/* CPU Transcoder for the pipe. Currently this can only differ from the
785 	 * pipe on Haswell and later (where we have a special eDP transcoder)
786 	 * and Broxton (where we have special DSI transcoders). */
787 	enum transcoder cpu_transcoder;
788 
789 	/*
790 	 * Use reduced/limited/broadcast rbg range, compressing from the full
791 	 * range fed into the crtcs.
792 	 */
793 	bool limited_color_range;
794 
795 	/* Bitmask of encoder types (enum intel_output_type)
796 	 * driven by the pipe.
797 	 */
798 	unsigned int output_types;
799 
800 	/* Whether we should send NULL infoframes. Required for audio. */
801 	bool has_hdmi_sink;
802 
803 	/* Audio enabled on this pipe. Only valid if either has_hdmi_sink or
804 	 * has_dp_encoder is set. */
805 	bool has_audio;
806 
807 	/*
808 	 * Enable dithering, used when the selected pipe bpp doesn't match the
809 	 * plane bpp.
810 	 */
811 	bool dither;
812 
813 	/*
814 	 * Dither gets enabled for 18bpp which causes CRC mismatch errors for
815 	 * compliance video pattern tests.
816 	 * Disable dither only if it is a compliance test request for
817 	 * 18bpp.
818 	 */
819 	bool dither_force_disable;
820 
821 	/* Controls for the clock computation, to override various stages. */
822 	bool clock_set;
823 
824 	/* SDVO TV has a bunch of special case. To make multifunction encoders
825 	 * work correctly, we need to track this at runtime.*/
826 	bool sdvo_tv_clock;
827 
828 	/*
829 	 * crtc bandwidth limit, don't increase pipe bpp or clock if not really
830 	 * required. This is set in the 2nd loop of calling encoder's
831 	 * ->compute_config if the first pick doesn't work out.
832 	 */
833 	bool bw_constrained;
834 
835 	/* Settings for the intel dpll used on pretty much everything but
836 	 * haswell. */
837 	struct dpll dpll;
838 
839 	/* Selected dpll when shared or NULL. */
840 	struct intel_shared_dpll *shared_dpll;
841 
842 	/* Actual register state of the dpll, for shared dpll cross-checking. */
843 	struct intel_dpll_hw_state dpll_hw_state;
844 
845 	/*
846 	 * ICL reserved DPLLs for the CRTC/port. The active PLL is selected by
847 	 * setting shared_dpll and dpll_hw_state to one of these reserved ones.
848 	 */
849 	struct icl_port_dpll {
850 		struct intel_shared_dpll *pll;
851 		struct intel_dpll_hw_state hw_state;
852 	} icl_port_dplls[ICL_PORT_DPLL_COUNT];
853 
854 	/* DSI PLL registers */
855 	struct {
856 		u32 ctrl, div;
857 	} dsi_pll;
858 
859 	int pipe_bpp;
860 	struct intel_link_m_n dp_m_n;
861 
862 	/* m2_n2 for eDP downclock */
863 	struct intel_link_m_n dp_m2_n2;
864 	bool has_drrs;
865 
866 	bool has_psr;
867 	bool has_psr2;
868 
869 	/*
870 	 * Frequence the dpll for the port should run at. Differs from the
871 	 * adjusted dotclock e.g. for DP or 10/12bpc hdmi mode. This is also
872 	 * already multiplied by pixel_multiplier.
873 	 */
874 	int port_clock;
875 
876 	/* Used by SDVO (and if we ever fix it, HDMI). */
877 	unsigned pixel_multiplier;
878 
879 	u8 lane_count;
880 
881 	/*
882 	 * Used by platforms having DP/HDMI PHY with programmable lane
883 	 * latency optimization.
884 	 */
885 	u8 lane_lat_optim_mask;
886 
887 	/* minimum acceptable voltage level */
888 	u8 min_voltage_level;
889 
890 	/* Panel fitter controls for gen2-gen4 + VLV */
891 	struct {
892 		u32 control;
893 		u32 pgm_ratios;
894 		u32 lvds_border_bits;
895 	} gmch_pfit;
896 
897 	/* Panel fitter placement and size for Ironlake+ */
898 	struct {
899 		u32 pos;
900 		u32 size;
901 		bool enabled;
902 		bool force_thru;
903 	} pch_pfit;
904 
905 	/* FDI configuration, only valid if has_pch_encoder is set. */
906 	int fdi_lanes;
907 	struct intel_link_m_n fdi_m_n;
908 
909 	bool ips_enabled;
910 
911 	bool crc_enabled;
912 
913 	bool enable_fbc;
914 
915 	bool double_wide;
916 
917 	int pbn;
918 
919 	struct intel_crtc_scaler_state scaler_state;
920 
921 	/* w/a for waiting 2 vblanks during crtc enable */
922 	enum pipe hsw_workaround_pipe;
923 
924 	/* IVB sprite scaling w/a (WaCxSRDisabledForSpriteScaling:ivb) */
925 	bool disable_lp_wm;
926 
927 	struct intel_crtc_wm_state wm;
928 
929 	u32 data_rate[I915_MAX_PLANES];
930 
931 	/* Gamma mode programmed on the pipe */
932 	u32 gamma_mode;
933 
934 	union {
935 		/* CSC mode programmed on the pipe */
936 		u32 csc_mode;
937 
938 		/* CHV CGM mode */
939 		u32 cgm_mode;
940 	};
941 
942 	/* bitmask of visible planes (enum plane_id) */
943 	u8 active_planes;
944 	u8 nv12_planes;
945 	u8 c8_planes;
946 
947 	/* bitmask of planes that will be updated during the commit */
948 	u8 update_planes;
949 
950 	struct {
951 		u32 enable;
952 		u32 gcp;
953 		union hdmi_infoframe avi;
954 		union hdmi_infoframe spd;
955 		union hdmi_infoframe hdmi;
956 		union hdmi_infoframe drm;
957 	} infoframes;
958 
959 	/* HDMI scrambling status */
960 	bool hdmi_scrambling;
961 
962 	/* HDMI High TMDS char rate ratio */
963 	bool hdmi_high_tmds_clock_ratio;
964 
965 	/* Output format RGB/YCBCR etc */
966 	enum intel_output_format output_format;
967 
968 	/* Output down scaling is done in LSPCON device */
969 	bool lspcon_downsampling;
970 
971 	/* enable pipe gamma? */
972 	bool gamma_enable;
973 
974 	/* enable pipe csc? */
975 	bool csc_enable;
976 
977 	/* Display Stream compression state */
978 	struct {
979 		bool compression_enable;
980 		bool dsc_split;
981 		u16 compressed_bpp;
982 		u8 slice_count;
983 	} dsc_params;
984 	struct drm_dsc_config dp_dsc_cfg;
985 
986 	/* Forward Error correction State */
987 	bool fec_enable;
988 };
989 
990 struct intel_crtc {
991 	struct drm_crtc base;
992 	enum pipe pipe;
993 	/*
994 	 * Whether the crtc and the connected output pipeline is active. Implies
995 	 * that crtc->enabled is set, i.e. the current mode configuration has
996 	 * some outputs connected to this crtc.
997 	 */
998 	bool active;
999 	u8 plane_ids_mask;
1000 	unsigned long long enabled_power_domains;
1001 	struct intel_overlay *overlay;
1002 
1003 	struct intel_crtc_state *config;
1004 
1005 	/* Access to these should be protected by dev_priv->irq_lock. */
1006 	bool cpu_fifo_underrun_disabled;
1007 	bool pch_fifo_underrun_disabled;
1008 
1009 	/* per-pipe watermark state */
1010 	struct {
1011 		/* watermarks currently being used  */
1012 		union {
1013 			struct intel_pipe_wm ilk;
1014 			struct vlv_wm_state vlv;
1015 			struct g4x_wm_state g4x;
1016 		} active;
1017 	} wm;
1018 
1019 	int scanline_offset;
1020 
1021 	struct {
1022 		unsigned start_vbl_count;
1023 		ktime_t start_vbl_time;
1024 		int min_vbl, max_vbl;
1025 		int scanline_start;
1026 	} debug;
1027 
1028 	/* scalers available on this crtc */
1029 	int num_scalers;
1030 };
1031 
1032 struct intel_plane {
1033 	struct drm_plane base;
1034 	enum i9xx_plane_id i9xx_plane;
1035 	enum plane_id id;
1036 	enum pipe pipe;
1037 	bool has_fbc;
1038 	bool has_ccs;
1039 	u32 frontbuffer_bit;
1040 
1041 	struct {
1042 		u32 base, cntl, size;
1043 	} cursor;
1044 
1045 	/*
1046 	 * NOTE: Do not place new plane state fields here (e.g., when adding
1047 	 * new plane properties).  New runtime state should now be placed in
1048 	 * the intel_plane_state structure and accessed via plane_state.
1049 	 */
1050 
1051 	unsigned int (*max_stride)(struct intel_plane *plane,
1052 				   u32 pixel_format, u64 modifier,
1053 				   unsigned int rotation);
1054 	void (*update_plane)(struct intel_plane *plane,
1055 			     const struct intel_crtc_state *crtc_state,
1056 			     const struct intel_plane_state *plane_state);
1057 	void (*update_slave)(struct intel_plane *plane,
1058 			     const struct intel_crtc_state *crtc_state,
1059 			     const struct intel_plane_state *plane_state);
1060 	void (*disable_plane)(struct intel_plane *plane,
1061 			      const struct intel_crtc_state *crtc_state);
1062 	bool (*get_hw_state)(struct intel_plane *plane, enum pipe *pipe);
1063 	int (*check_plane)(struct intel_crtc_state *crtc_state,
1064 			   struct intel_plane_state *plane_state);
1065 };
1066 
1067 struct intel_watermark_params {
1068 	u16 fifo_size;
1069 	u16 max_wm;
1070 	u8 default_wm;
1071 	u8 guard_size;
1072 	u8 cacheline_size;
1073 };
1074 
1075 struct cxsr_latency {
1076 	bool is_desktop : 1;
1077 	bool is_ddr3 : 1;
1078 	u16 fsb_freq;
1079 	u16 mem_freq;
1080 	u16 display_sr;
1081 	u16 display_hpll_disable;
1082 	u16 cursor_sr;
1083 	u16 cursor_hpll_disable;
1084 };
1085 
1086 #define to_intel_atomic_state(x) container_of(x, struct intel_atomic_state, base)
1087 #define to_intel_crtc(x) container_of(x, struct intel_crtc, base)
1088 #define to_intel_crtc_state(x) container_of(x, struct intel_crtc_state, base)
1089 #define to_intel_connector(x) container_of(x, struct intel_connector, base)
1090 #define to_intel_encoder(x) container_of(x, struct intel_encoder, base)
1091 #define to_intel_framebuffer(x) container_of(x, struct intel_framebuffer, base)
1092 #define to_intel_plane(x) container_of(x, struct intel_plane, base)
1093 #define to_intel_plane_state(x) container_of(x, struct intel_plane_state, base)
1094 #define intel_fb_obj(x) ((x) ? to_intel_bo((x)->obj[0]) : NULL)
1095 
1096 struct intel_hdmi {
1097 	i915_reg_t hdmi_reg;
1098 	int ddc_bus;
1099 	struct {
1100 		enum drm_dp_dual_mode_type type;
1101 		int max_tmds_clock;
1102 	} dp_dual_mode;
1103 	bool has_hdmi_sink;
1104 	bool has_audio;
1105 	struct intel_connector *attached_connector;
1106 	struct cec_notifier *cec_notifier;
1107 };
1108 
1109 struct intel_dp_mst_encoder;
1110 #define DP_MAX_DOWNSTREAM_PORTS		0x10
1111 
1112 /*
1113  * enum link_m_n_set:
1114  *	When platform provides two set of M_N registers for dp, we can
1115  *	program them and switch between them incase of DRRS.
1116  *	But When only one such register is provided, we have to program the
1117  *	required divider value on that registers itself based on the DRRS state.
1118  *
1119  * M1_N1	: Program dp_m_n on M1_N1 registers
1120  *			  dp_m2_n2 on M2_N2 registers (If supported)
1121  *
1122  * M2_N2	: Program dp_m2_n2 on M1_N1 registers
1123  *			  M2_N2 registers are not supported
1124  */
1125 
1126 enum link_m_n_set {
1127 	/* Sets the m1_n1 and m2_n2 */
1128 	M1_N1 = 0,
1129 	M2_N2
1130 };
1131 
1132 struct intel_dp_compliance_data {
1133 	unsigned long edid;
1134 	u8 video_pattern;
1135 	u16 hdisplay, vdisplay;
1136 	u8 bpc;
1137 };
1138 
1139 struct intel_dp_compliance {
1140 	unsigned long test_type;
1141 	struct intel_dp_compliance_data test_data;
1142 	bool test_active;
1143 	int test_link_rate;
1144 	u8 test_lane_count;
1145 };
1146 
1147 struct intel_dp {
1148 	i915_reg_t output_reg;
1149 	u32 DP;
1150 	int link_rate;
1151 	u8 lane_count;
1152 	u8 sink_count;
1153 	bool link_mst;
1154 	bool link_trained;
1155 	bool has_audio;
1156 	bool reset_link_params;
1157 	u8 dpcd[DP_RECEIVER_CAP_SIZE];
1158 	u8 psr_dpcd[EDP_PSR_RECEIVER_CAP_SIZE];
1159 	u8 downstream_ports[DP_MAX_DOWNSTREAM_PORTS];
1160 	u8 edp_dpcd[EDP_DISPLAY_CTL_CAP_SIZE];
1161 	u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE];
1162 	u8 fec_capable;
1163 	/* source rates */
1164 	int num_source_rates;
1165 	const int *source_rates;
1166 	/* sink rates as reported by DP_MAX_LINK_RATE/DP_SUPPORTED_LINK_RATES */
1167 	int num_sink_rates;
1168 	int sink_rates[DP_MAX_SUPPORTED_RATES];
1169 	bool use_rate_select;
1170 	/* intersection of source and sink rates */
1171 	int num_common_rates;
1172 	int common_rates[DP_MAX_SUPPORTED_RATES];
1173 	/* Max lane count for the current link */
1174 	int max_link_lane_count;
1175 	/* Max rate for the current link */
1176 	int max_link_rate;
1177 	/* sink or branch descriptor */
1178 	struct drm_dp_desc desc;
1179 	struct drm_dp_aux aux;
1180 	u8 train_set[4];
1181 	int panel_power_up_delay;
1182 	int panel_power_down_delay;
1183 	int panel_power_cycle_delay;
1184 	int backlight_on_delay;
1185 	int backlight_off_delay;
1186 	struct delayed_work panel_vdd_work;
1187 	bool want_panel_vdd;
1188 	unsigned long last_power_on;
1189 	unsigned long last_backlight_off;
1190 	ktime_t panel_power_off_time;
1191 
1192 	struct notifier_block edp_notifier;
1193 
1194 	/*
1195 	 * Pipe whose power sequencer is currently locked into
1196 	 * this port. Only relevant on VLV/CHV.
1197 	 */
1198 	enum pipe pps_pipe;
1199 	/*
1200 	 * Pipe currently driving the port. Used for preventing
1201 	 * the use of the PPS for any pipe currentrly driving
1202 	 * external DP as that will mess things up on VLV.
1203 	 */
1204 	enum pipe active_pipe;
1205 	/*
1206 	 * Set if the sequencer may be reset due to a power transition,
1207 	 * requiring a reinitialization. Only relevant on BXT.
1208 	 */
1209 	bool pps_reset;
1210 	struct edp_power_seq pps_delays;
1211 
1212 	bool can_mst; /* this port supports mst */
1213 	bool is_mst;
1214 	int active_mst_links;
1215 	/* connector directly attached - won't be use for modeset in mst world */
1216 	struct intel_connector *attached_connector;
1217 
1218 	/* mst connector list */
1219 	struct intel_dp_mst_encoder *mst_encoders[I915_MAX_PIPES];
1220 	struct drm_dp_mst_topology_mgr mst_mgr;
1221 
1222 	u32 (*get_aux_clock_divider)(struct intel_dp *dp, int index);
1223 	/*
1224 	 * This function returns the value we have to program the AUX_CTL
1225 	 * register with to kick off an AUX transaction.
1226 	 */
1227 	u32 (*get_aux_send_ctl)(struct intel_dp *dp, int send_bytes,
1228 				u32 aux_clock_divider);
1229 
1230 	i915_reg_t (*aux_ch_ctl_reg)(struct intel_dp *dp);
1231 	i915_reg_t (*aux_ch_data_reg)(struct intel_dp *dp, int index);
1232 
1233 	/* This is called before a link training is starterd */
1234 	void (*prepare_link_retrain)(struct intel_dp *intel_dp);
1235 
1236 	/* Displayport compliance testing */
1237 	struct intel_dp_compliance compliance;
1238 
1239 	/* Display stream compression testing */
1240 	bool force_dsc_en;
1241 };
1242 
1243 enum lspcon_vendor {
1244 	LSPCON_VENDOR_MCA,
1245 	LSPCON_VENDOR_PARADE
1246 };
1247 
1248 struct intel_lspcon {
1249 	bool active;
1250 	enum drm_lspcon_mode mode;
1251 	enum lspcon_vendor vendor;
1252 };
1253 
1254 struct intel_digital_port {
1255 	struct intel_encoder base;
1256 	u32 saved_port_bits;
1257 	struct intel_dp dp;
1258 	struct intel_hdmi hdmi;
1259 	struct intel_lspcon lspcon;
1260 	enum irqreturn (*hpd_pulse)(struct intel_digital_port *, bool);
1261 	bool release_cl2_override;
1262 	u8 max_lanes;
1263 	/* Used for DP and ICL+ TypeC/DP and TypeC/HDMI ports. */
1264 	enum aux_ch aux_ch;
1265 	enum intel_display_power_domain ddi_io_power_domain;
1266 	struct mutex tc_lock;	/* protects the TypeC port mode */
1267 	intel_wakeref_t tc_lock_wakeref;
1268 	int tc_link_refcount;
1269 	bool tc_legacy_port:1;
1270 	char tc_port_name[8];
1271 	enum tc_port_mode tc_mode;
1272 	enum phy_fia tc_phy_fia;
1273 
1274 	void (*write_infoframe)(struct intel_encoder *encoder,
1275 				const struct intel_crtc_state *crtc_state,
1276 				unsigned int type,
1277 				const void *frame, ssize_t len);
1278 	void (*read_infoframe)(struct intel_encoder *encoder,
1279 			       const struct intel_crtc_state *crtc_state,
1280 			       unsigned int type,
1281 			       void *frame, ssize_t len);
1282 	void (*set_infoframes)(struct intel_encoder *encoder,
1283 			       bool enable,
1284 			       const struct intel_crtc_state *crtc_state,
1285 			       const struct drm_connector_state *conn_state);
1286 	u32 (*infoframes_enabled)(struct intel_encoder *encoder,
1287 				  const struct intel_crtc_state *pipe_config);
1288 };
1289 
1290 struct intel_dp_mst_encoder {
1291 	struct intel_encoder base;
1292 	enum pipe pipe;
1293 	struct intel_digital_port *primary;
1294 	struct intel_connector *connector;
1295 };
1296 
1297 static inline enum dpio_channel
vlv_dport_to_channel(struct intel_digital_port * dport)1298 vlv_dport_to_channel(struct intel_digital_port *dport)
1299 {
1300 	switch (dport->base.port) {
1301 	case PORT_B:
1302 	case PORT_D:
1303 		return DPIO_CH0;
1304 	case PORT_C:
1305 		return DPIO_CH1;
1306 	default:
1307 		BUG();
1308 	}
1309 }
1310 
1311 static inline enum dpio_phy
vlv_dport_to_phy(struct intel_digital_port * dport)1312 vlv_dport_to_phy(struct intel_digital_port *dport)
1313 {
1314 	switch (dport->base.port) {
1315 	case PORT_B:
1316 	case PORT_C:
1317 		return DPIO_PHY0;
1318 	case PORT_D:
1319 		return DPIO_PHY1;
1320 	default:
1321 		BUG();
1322 	}
1323 }
1324 
1325 static inline enum dpio_channel
vlv_pipe_to_channel(enum pipe pipe)1326 vlv_pipe_to_channel(enum pipe pipe)
1327 {
1328 	switch (pipe) {
1329 	case PIPE_A:
1330 	case PIPE_C:
1331 		return DPIO_CH0;
1332 	case PIPE_B:
1333 		return DPIO_CH1;
1334 	default:
1335 		BUG();
1336 	}
1337 }
1338 
1339 static inline struct intel_crtc *
intel_get_crtc_for_pipe(struct drm_i915_private * dev_priv,enum pipe pipe)1340 intel_get_crtc_for_pipe(struct drm_i915_private *dev_priv, enum pipe pipe)
1341 {
1342 	return dev_priv->pipe_to_crtc_mapping[pipe];
1343 }
1344 
1345 static inline struct intel_crtc *
intel_get_crtc_for_plane(struct drm_i915_private * dev_priv,enum i9xx_plane_id plane)1346 intel_get_crtc_for_plane(struct drm_i915_private *dev_priv, enum i9xx_plane_id plane)
1347 {
1348 	return dev_priv->plane_to_crtc_mapping[plane];
1349 }
1350 
1351 struct intel_load_detect_pipe {
1352 	struct drm_atomic_state *restore_state;
1353 };
1354 
1355 static inline struct intel_encoder *
intel_attached_encoder(struct drm_connector * connector)1356 intel_attached_encoder(struct drm_connector *connector)
1357 {
1358 	return to_intel_connector(connector)->encoder;
1359 }
1360 
intel_encoder_is_dig_port(struct intel_encoder * encoder)1361 static inline bool intel_encoder_is_dig_port(struct intel_encoder *encoder)
1362 {
1363 	switch (encoder->type) {
1364 	case INTEL_OUTPUT_DDI:
1365 	case INTEL_OUTPUT_DP:
1366 	case INTEL_OUTPUT_EDP:
1367 	case INTEL_OUTPUT_HDMI:
1368 		return true;
1369 	default:
1370 		return false;
1371 	}
1372 }
1373 
1374 static inline struct intel_digital_port *
enc_to_dig_port(struct drm_encoder * encoder)1375 enc_to_dig_port(struct drm_encoder *encoder)
1376 {
1377 	struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
1378 
1379 	if (intel_encoder_is_dig_port(intel_encoder))
1380 		return container_of(encoder, struct intel_digital_port,
1381 				    base.base);
1382 	else
1383 		return NULL;
1384 }
1385 
1386 static inline struct intel_digital_port *
conn_to_dig_port(struct intel_connector * connector)1387 conn_to_dig_port(struct intel_connector *connector)
1388 {
1389 	return enc_to_dig_port(&intel_attached_encoder(&connector->base)->base);
1390 }
1391 
1392 static inline struct intel_dp_mst_encoder *
enc_to_mst(struct drm_encoder * encoder)1393 enc_to_mst(struct drm_encoder *encoder)
1394 {
1395 	return container_of(encoder, struct intel_dp_mst_encoder, base.base);
1396 }
1397 
enc_to_intel_dp(struct drm_encoder * encoder)1398 static inline struct intel_dp *enc_to_intel_dp(struct drm_encoder *encoder)
1399 {
1400 	return &enc_to_dig_port(encoder)->dp;
1401 }
1402 
intel_encoder_is_dp(struct intel_encoder * encoder)1403 static inline bool intel_encoder_is_dp(struct intel_encoder *encoder)
1404 {
1405 	switch (encoder->type) {
1406 	case INTEL_OUTPUT_DP:
1407 	case INTEL_OUTPUT_EDP:
1408 		return true;
1409 	case INTEL_OUTPUT_DDI:
1410 		/* Skip pure HDMI/DVI DDI encoders */
1411 		return i915_mmio_reg_valid(enc_to_intel_dp(&encoder->base)->output_reg);
1412 	default:
1413 		return false;
1414 	}
1415 }
1416 
1417 static inline struct intel_lspcon *
enc_to_intel_lspcon(struct drm_encoder * encoder)1418 enc_to_intel_lspcon(struct drm_encoder *encoder)
1419 {
1420 	return &enc_to_dig_port(encoder)->lspcon;
1421 }
1422 
1423 static inline struct intel_digital_port *
dp_to_dig_port(struct intel_dp * intel_dp)1424 dp_to_dig_port(struct intel_dp *intel_dp)
1425 {
1426 	return container_of(intel_dp, struct intel_digital_port, dp);
1427 }
1428 
1429 static inline struct intel_lspcon *
dp_to_lspcon(struct intel_dp * intel_dp)1430 dp_to_lspcon(struct intel_dp *intel_dp)
1431 {
1432 	return &dp_to_dig_port(intel_dp)->lspcon;
1433 }
1434 
1435 static inline struct drm_i915_private *
dp_to_i915(struct intel_dp * intel_dp)1436 dp_to_i915(struct intel_dp *intel_dp)
1437 {
1438 	return to_i915(dp_to_dig_port(intel_dp)->base.base.dev);
1439 }
1440 
1441 static inline struct intel_digital_port *
hdmi_to_dig_port(struct intel_hdmi * intel_hdmi)1442 hdmi_to_dig_port(struct intel_hdmi *intel_hdmi)
1443 {
1444 	return container_of(intel_hdmi, struct intel_digital_port, hdmi);
1445 }
1446 
1447 static inline struct intel_plane_state *
intel_atomic_get_plane_state(struct intel_atomic_state * state,struct intel_plane * plane)1448 intel_atomic_get_plane_state(struct intel_atomic_state *state,
1449 				 struct intel_plane *plane)
1450 {
1451 	struct drm_plane_state *ret =
1452 		drm_atomic_get_plane_state(&state->base, &plane->base);
1453 
1454 	if (IS_ERR(ret))
1455 		return ERR_CAST(ret);
1456 
1457 	return to_intel_plane_state(ret);
1458 }
1459 
1460 static inline struct intel_plane_state *
intel_atomic_get_old_plane_state(struct intel_atomic_state * state,struct intel_plane * plane)1461 intel_atomic_get_old_plane_state(struct intel_atomic_state *state,
1462 				 struct intel_plane *plane)
1463 {
1464 	return to_intel_plane_state(drm_atomic_get_old_plane_state(&state->base,
1465 								   &plane->base));
1466 }
1467 
1468 static inline struct intel_plane_state *
intel_atomic_get_new_plane_state(struct intel_atomic_state * state,struct intel_plane * plane)1469 intel_atomic_get_new_plane_state(struct intel_atomic_state *state,
1470 				 struct intel_plane *plane)
1471 {
1472 	return to_intel_plane_state(drm_atomic_get_new_plane_state(&state->base,
1473 								   &plane->base));
1474 }
1475 
1476 static inline struct intel_crtc_state *
intel_atomic_get_old_crtc_state(struct intel_atomic_state * state,struct intel_crtc * crtc)1477 intel_atomic_get_old_crtc_state(struct intel_atomic_state *state,
1478 				struct intel_crtc *crtc)
1479 {
1480 	return to_intel_crtc_state(drm_atomic_get_old_crtc_state(&state->base,
1481 								 &crtc->base));
1482 }
1483 
1484 static inline struct intel_crtc_state *
intel_atomic_get_new_crtc_state(struct intel_atomic_state * state,struct intel_crtc * crtc)1485 intel_atomic_get_new_crtc_state(struct intel_atomic_state *state,
1486 				struct intel_crtc *crtc)
1487 {
1488 	return to_intel_crtc_state(drm_atomic_get_new_crtc_state(&state->base,
1489 								 &crtc->base));
1490 }
1491 
1492 /* intel_display.c */
1493 static inline bool
intel_crtc_has_type(const struct intel_crtc_state * crtc_state,enum intel_output_type type)1494 intel_crtc_has_type(const struct intel_crtc_state *crtc_state,
1495 		    enum intel_output_type type)
1496 {
1497 	return crtc_state->output_types & (1 << type);
1498 }
1499 static inline bool
intel_crtc_has_dp_encoder(const struct intel_crtc_state * crtc_state)1500 intel_crtc_has_dp_encoder(const struct intel_crtc_state *crtc_state)
1501 {
1502 	return crtc_state->output_types &
1503 		((1 << INTEL_OUTPUT_DP) |
1504 		 (1 << INTEL_OUTPUT_DP_MST) |
1505 		 (1 << INTEL_OUTPUT_EDP));
1506 }
1507 static inline void
intel_wait_for_vblank(struct drm_i915_private * dev_priv,enum pipe pipe)1508 intel_wait_for_vblank(struct drm_i915_private *dev_priv, enum pipe pipe)
1509 {
1510 	drm_wait_one_vblank(&dev_priv->drm, pipe);
1511 }
1512 static inline void
intel_wait_for_vblank_if_active(struct drm_i915_private * dev_priv,int pipe)1513 intel_wait_for_vblank_if_active(struct drm_i915_private *dev_priv, int pipe)
1514 {
1515 	const struct intel_crtc *crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
1516 
1517 	if (crtc->active)
1518 		intel_wait_for_vblank(dev_priv, pipe);
1519 }
1520 
intel_plane_ggtt_offset(const struct intel_plane_state * state)1521 static inline u32 intel_plane_ggtt_offset(const struct intel_plane_state *state)
1522 {
1523 	return i915_ggtt_offset(state->vma);
1524 }
1525 
1526 #endif /*  __INTEL_DISPLAY_TYPES_H__ */
1527