1 /******************************************************************************
2  *
3  * Copyright(c) 2009-2012  Realtek Corporation.
4  *
5  * This program is free software; you can redistribute it and/or modify it
6  * under the terms of version 2 of the GNU General Public License as
7  * published by the Free Software Foundation.
8  *
9  * This program is distributed in the hope that it will be useful, but WITHOUT
10  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
12  * more details.
13  *
14  * The full GNU General Public License is included in this distribution in the
15  * file called LICENSE.
16  *
17  * Contact Information:
18  * wlanfae <wlanfae@realtek.com>
19  * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
20  * Hsinchu 300, Taiwan.
21  *
22  * Larry Finger <Larry.Finger@lwfinger.net>
23  *
24  *****************************************************************************/
25 
26 #include "../wifi.h"
27 #include "../core.h"
28 #include "../pci.h"
29 #include "../base.h"
30 #include "reg.h"
31 #include "def.h"
32 #include "phy.h"
33 #include "dm.h"
34 #include "hw.h"
35 #include "sw.h"
36 #include "trx.h"
37 #include "led.h"
38 
39 #include <linux/module.h>
40 
rtl92d_init_aspm_vars(struct ieee80211_hw * hw)41 static void rtl92d_init_aspm_vars(struct ieee80211_hw *hw)
42 {
43 	struct rtl_priv *rtlpriv = rtl_priv(hw);
44 	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
45 
46 	/*close ASPM for AMD defaultly */
47 	rtlpci->const_amdpci_aspm = 0;
48 
49 	/*
50 	 * ASPM PS mode.
51 	 * 0 - Disable ASPM,
52 	 * 1 - Enable ASPM without Clock Req,
53 	 * 2 - Enable ASPM with Clock Req,
54 	 * 3 - Alwyas Enable ASPM with Clock Req,
55 	 * 4 - Always Enable ASPM without Clock Req.
56 	 * set defult to RTL8192CE:3 RTL8192E:2
57 	 * */
58 	rtlpci->const_pci_aspm = 3;
59 
60 	/*Setting for PCI-E device */
61 	rtlpci->const_devicepci_aspm_setting = 0x03;
62 
63 	/*Setting for PCI-E bridge */
64 	rtlpci->const_hostpci_aspm_setting = 0x02;
65 
66 	/*
67 	 * In Hw/Sw Radio Off situation.
68 	 * 0 - Default,
69 	 * 1 - From ASPM setting without low Mac Pwr,
70 	 * 2 - From ASPM setting with low Mac Pwr,
71 	 * 3 - Bus D3
72 	 * set default to RTL8192CE:0 RTL8192SE:2
73 	 */
74 	rtlpci->const_hwsw_rfoff_d3 = 0;
75 
76 	/*
77 	 * This setting works for those device with
78 	 * backdoor ASPM setting such as EPHY setting.
79 	 * 0 - Not support ASPM,
80 	 * 1 - Support ASPM,
81 	 * 2 - According to chipset.
82 	 */
83 	rtlpci->const_support_pciaspm = rtlpriv->cfg->mod_params->aspm_support;
84 }
85 
rtl92d_init_sw_vars(struct ieee80211_hw * hw)86 static int rtl92d_init_sw_vars(struct ieee80211_hw *hw)
87 {
88 	int err;
89 	u8 tid;
90 	struct rtl_priv *rtlpriv = rtl_priv(hw);
91 	struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
92 	char *fw_name = "rtlwifi/rtl8192defw.bin";
93 
94 	rtlpriv->dm.dm_initialgain_enable = true;
95 	rtlpriv->dm.dm_flag = 0;
96 	rtlpriv->dm.disable_framebursting = false;
97 	rtlpriv->dm.thermalvalue = 0;
98 	rtlpriv->dm.useramask = true;
99 
100 	/* dual mac */
101 	if (rtlpriv->rtlhal.current_bandtype == BAND_ON_5G)
102 		rtlpriv->phy.current_channel = 36;
103 	else
104 		rtlpriv->phy.current_channel = 1;
105 
106 	if (rtlpriv->rtlhal.macphymode != SINGLEMAC_SINGLEPHY) {
107 		rtlpriv->rtlhal.disable_amsdu_8k = true;
108 		/* No long RX - reduce fragmentation */
109 		rtlpci->rxbuffersize = 4096;
110 	}
111 
112 	rtlpci->transmit_config = CFENDFORM | BIT(12) | BIT(13);
113 
114 	rtlpci->receive_config = (
115 			RCR_APPFCS
116 			| RCR_AMF
117 			| RCR_ADF
118 			| RCR_APP_MIC
119 			| RCR_APP_ICV
120 			| RCR_AICV
121 			| RCR_ACRC32
122 			| RCR_AB
123 			| RCR_AM
124 			| RCR_APM
125 			| RCR_APP_PHYST_RXFF
126 			| RCR_HTC_LOC_CTRL
127 	);
128 
129 	rtlpci->irq_mask[0] = (u32) (
130 			IMR_ROK
131 			| IMR_VODOK
132 			| IMR_VIDOK
133 			| IMR_BEDOK
134 			| IMR_BKDOK
135 			| IMR_MGNTDOK
136 			| IMR_HIGHDOK
137 			| IMR_BDOK
138 			| IMR_RDU
139 			| IMR_RXFOVW
140 	);
141 
142 	rtlpci->irq_mask[1] = (u32) (IMR_CPWM | IMR_C2HCMD);
143 
144 	/* for LPS & IPS */
145 	rtlpriv->psc.inactiveps = rtlpriv->cfg->mod_params->inactiveps;
146 	rtlpriv->psc.swctrl_lps = rtlpriv->cfg->mod_params->swctrl_lps;
147 	rtlpriv->psc.fwctrl_lps = rtlpriv->cfg->mod_params->fwctrl_lps;
148 	if (!rtlpriv->psc.inactiveps)
149 		pr_info("Power Save off (module option)\n");
150 	if (!rtlpriv->psc.fwctrl_lps)
151 		pr_info("FW Power Save off (module option)\n");
152 	rtlpriv->psc.reg_fwctrl_lps = 3;
153 	rtlpriv->psc.reg_max_lps_awakeintvl = 5;
154 	/* for ASPM, you can close aspm through
155 	 * set const_support_pciaspm = 0 */
156 	rtl92d_init_aspm_vars(hw);
157 
158 	if (rtlpriv->psc.reg_fwctrl_lps == 1)
159 		rtlpriv->psc.fwctrl_psmode = FW_PS_MIN_MODE;
160 	else if (rtlpriv->psc.reg_fwctrl_lps == 2)
161 		rtlpriv->psc.fwctrl_psmode = FW_PS_MAX_MODE;
162 	else if (rtlpriv->psc.reg_fwctrl_lps == 3)
163 		rtlpriv->psc.fwctrl_psmode = FW_PS_DTIM_MODE;
164 
165 	/* for early mode */
166 	rtlpriv->rtlhal.earlymode_enable = false;
167 	for (tid = 0; tid < 8; tid++)
168 		skb_queue_head_init(&rtlpriv->mac80211.skb_waitq[tid]);
169 
170 	/* for firmware buf */
171 	rtlpriv->rtlhal.pfirmware = vzalloc(0x8000);
172 	if (!rtlpriv->rtlhal.pfirmware) {
173 		pr_err("Can't alloc buffer for fw\n");
174 		return 1;
175 	}
176 
177 	rtlpriv->max_fw_size = 0x8000;
178 	pr_info("Driver for Realtek RTL8192DE WLAN interface\n");
179 	pr_info("Loading firmware file %s\n", fw_name);
180 
181 	/* request fw */
182 	err = request_firmware_nowait(THIS_MODULE, 1, fw_name,
183 				      rtlpriv->io.dev, GFP_KERNEL, hw,
184 				      rtl_fw_cb);
185 	if (err) {
186 		pr_err("Failed to request firmware!\n");
187 		vfree(rtlpriv->rtlhal.pfirmware);
188 		rtlpriv->rtlhal.pfirmware = NULL;
189 		return 1;
190 	}
191 
192 	return 0;
193 }
194 
rtl92d_deinit_sw_vars(struct ieee80211_hw * hw)195 static void rtl92d_deinit_sw_vars(struct ieee80211_hw *hw)
196 {
197 	struct rtl_priv *rtlpriv = rtl_priv(hw);
198 	u8 tid;
199 
200 	if (rtlpriv->rtlhal.pfirmware) {
201 		vfree(rtlpriv->rtlhal.pfirmware);
202 		rtlpriv->rtlhal.pfirmware = NULL;
203 	}
204 	for (tid = 0; tid < 8; tid++)
205 		skb_queue_purge(&rtlpriv->mac80211.skb_waitq[tid]);
206 }
207 
208 static struct rtl_hal_ops rtl8192de_hal_ops = {
209 	.init_sw_vars = rtl92d_init_sw_vars,
210 	.deinit_sw_vars = rtl92d_deinit_sw_vars,
211 	.read_eeprom_info = rtl92de_read_eeprom_info,
212 	.interrupt_recognized = rtl92de_interrupt_recognized,
213 	.hw_init = rtl92de_hw_init,
214 	.hw_disable = rtl92de_card_disable,
215 	.hw_suspend = rtl92de_suspend,
216 	.hw_resume = rtl92de_resume,
217 	.enable_interrupt = rtl92de_enable_interrupt,
218 	.disable_interrupt = rtl92de_disable_interrupt,
219 	.set_network_type = rtl92de_set_network_type,
220 	.set_chk_bssid = rtl92de_set_check_bssid,
221 	.set_qos = rtl92de_set_qos,
222 	.set_bcn_reg = rtl92de_set_beacon_related_registers,
223 	.set_bcn_intv = rtl92de_set_beacon_interval,
224 	.update_interrupt_mask = rtl92de_update_interrupt_mask,
225 	.get_hw_reg = rtl92de_get_hw_reg,
226 	.set_hw_reg = rtl92de_set_hw_reg,
227 	.update_rate_tbl = rtl92de_update_hal_rate_tbl,
228 	.fill_tx_desc = rtl92de_tx_fill_desc,
229 	.fill_tx_cmddesc = rtl92de_tx_fill_cmddesc,
230 	.query_rx_desc = rtl92de_rx_query_desc,
231 	.set_channel_access = rtl92de_update_channel_access_setting,
232 	.radio_onoff_checking = rtl92de_gpio_radio_on_off_checking,
233 	.set_bw_mode = rtl92d_phy_set_bw_mode,
234 	.switch_channel = rtl92d_phy_sw_chnl,
235 	.dm_watchdog = rtl92d_dm_watchdog,
236 	.scan_operation_backup = rtl_phy_scan_operation_backup,
237 	.set_rf_power_state = rtl92d_phy_set_rf_power_state,
238 	.led_control = rtl92de_led_control,
239 	.set_desc = rtl92de_set_desc,
240 	.get_desc = rtl92de_get_desc,
241 	.tx_polling = rtl92de_tx_polling,
242 	.enable_hw_sec = rtl92de_enable_hw_security_config,
243 	.set_key = rtl92de_set_key,
244 	.init_sw_leds = rtl92de_init_sw_leds,
245 	.get_bbreg = rtl92d_phy_query_bb_reg,
246 	.set_bbreg = rtl92d_phy_set_bb_reg,
247 	.get_rfreg = rtl92d_phy_query_rf_reg,
248 	.set_rfreg = rtl92d_phy_set_rf_reg,
249 	.linked_set_reg = rtl92d_linked_set_reg,
250 	.get_btc_status = rtl_btc_status_false,
251 };
252 
253 static struct rtl_mod_params rtl92de_mod_params = {
254 	.sw_crypto = false,
255 	.inactiveps = true,
256 	.swctrl_lps = true,
257 	.fwctrl_lps = false,
258 	.aspm_support = 1,
259 	.debug_level = 0,
260 	.debug_mask = 0,
261 };
262 
263 static const struct rtl_hal_cfg rtl92de_hal_cfg = {
264 	.bar_id = 2,
265 	.write_readback = true,
266 	.name = "rtl8192de",
267 	.ops = &rtl8192de_hal_ops,
268 	.mod_params = &rtl92de_mod_params,
269 
270 	.maps[SYS_ISO_CTRL] = REG_SYS_ISO_CTRL,
271 	.maps[SYS_FUNC_EN] = REG_SYS_FUNC_EN,
272 	.maps[SYS_CLK] = REG_SYS_CLKR,
273 	.maps[MAC_RCR_AM] = RCR_AM,
274 	.maps[MAC_RCR_AB] = RCR_AB,
275 	.maps[MAC_RCR_ACRC32] = RCR_ACRC32,
276 	.maps[MAC_RCR_ACF] = RCR_ACF,
277 	.maps[MAC_RCR_AAP] = RCR_AAP,
278 
279 	.maps[EFUSE_TEST] = REG_EFUSE_TEST,
280 	.maps[EFUSE_CTRL] = REG_EFUSE_CTRL,
281 	.maps[EFUSE_CLK] = 0,	/* just for 92se */
282 	.maps[EFUSE_CLK_CTRL] = REG_EFUSE_CTRL,
283 	.maps[EFUSE_PWC_EV12V] = PWC_EV12V,
284 	.maps[EFUSE_FEN_ELDR] = FEN_ELDR,
285 	.maps[EFUSE_LOADER_CLK_EN] = LOADER_CLK_EN,
286 	.maps[EFUSE_ANA8M] = 0,	/* just for 92se */
287 	.maps[EFUSE_HWSET_MAX_SIZE] = HWSET_MAX_SIZE,
288 	.maps[EFUSE_MAX_SECTION_MAP] = EFUSE_MAX_SECTION,
289 	.maps[EFUSE_REAL_CONTENT_SIZE] = EFUSE_REAL_CONTENT_LEN,
290 
291 	.maps[RWCAM] = REG_CAMCMD,
292 	.maps[WCAMI] = REG_CAMWRITE,
293 	.maps[RCAMO] = REG_CAMREAD,
294 	.maps[CAMDBG] = REG_CAMDBG,
295 	.maps[SECR] = REG_SECCFG,
296 	.maps[SEC_CAM_NONE] = CAM_NONE,
297 	.maps[SEC_CAM_WEP40] = CAM_WEP40,
298 	.maps[SEC_CAM_TKIP] = CAM_TKIP,
299 	.maps[SEC_CAM_AES] = CAM_AES,
300 	.maps[SEC_CAM_WEP104] = CAM_WEP104,
301 
302 	.maps[RTL_IMR_BCNDMAINT6] = IMR_BCNDMAINT6,
303 	.maps[RTL_IMR_BCNDMAINT5] = IMR_BCNDMAINT5,
304 	.maps[RTL_IMR_BCNDMAINT4] = IMR_BCNDMAINT4,
305 	.maps[RTL_IMR_BCNDMAINT3] = IMR_BCNDMAINT3,
306 	.maps[RTL_IMR_BCNDMAINT2] = IMR_BCNDMAINT2,
307 	.maps[RTL_IMR_BCNDMAINT1] = IMR_BCNDMAINT1,
308 	.maps[RTL_IMR_BCNDOK8] = IMR_BCNDOK8,
309 	.maps[RTL_IMR_BCNDOK7] = IMR_BCNDOK7,
310 	.maps[RTL_IMR_BCNDOK6] = IMR_BCNDOK6,
311 	.maps[RTL_IMR_BCNDOK5] = IMR_BCNDOK5,
312 	.maps[RTL_IMR_BCNDOK4] = IMR_BCNDOK4,
313 	.maps[RTL_IMR_BCNDOK3] = IMR_BCNDOK3,
314 	.maps[RTL_IMR_BCNDOK2] = IMR_BCNDOK2,
315 	.maps[RTL_IMR_BCNDOK1] = IMR_BCNDOK1,
316 	.maps[RTL_IMR_TIMEOUT2] = IMR_TIMEOUT2,
317 	.maps[RTL_IMR_TIMEOUT1] = IMR_TIMEOUT1,
318 
319 	.maps[RTL_IMR_TXFOVW] = IMR_TXFOVW,
320 	.maps[RTL_IMR_PSTIMEOUT] = IMR_PSTIMEOUT,
321 	.maps[RTL_IMR_BCNINT] = IMR_BCNINT,
322 	.maps[RTL_IMR_RXFOVW] = IMR_RXFOVW,
323 	.maps[RTL_IMR_RDU] = IMR_RDU,
324 	.maps[RTL_IMR_ATIMEND] = IMR_ATIMEND,
325 	.maps[RTL_IMR_BDOK] = IMR_BDOK,
326 	.maps[RTL_IMR_MGNTDOK] = IMR_MGNTDOK,
327 	.maps[RTL_IMR_TBDER] = IMR_TBDER,
328 	.maps[RTL_IMR_HIGHDOK] = IMR_HIGHDOK,
329 	.maps[RTL_IMR_TBDOK] = IMR_TBDOK,
330 	.maps[RTL_IMR_BKDOK] = IMR_BKDOK,
331 	.maps[RTL_IMR_BEDOK] = IMR_BEDOK,
332 	.maps[RTL_IMR_VIDOK] = IMR_VIDOK,
333 	.maps[RTL_IMR_VODOK] = IMR_VODOK,
334 	.maps[RTL_IMR_ROK] = IMR_ROK,
335 	.maps[RTL_IBSS_INT_MASKS] = (IMR_BCNINT | IMR_TBDOK | IMR_TBDER),
336 
337 	.maps[RTL_RC_CCK_RATE1M] = DESC_RATE1M,
338 	.maps[RTL_RC_CCK_RATE2M] = DESC_RATE2M,
339 	.maps[RTL_RC_CCK_RATE5_5M] = DESC_RATE5_5M,
340 	.maps[RTL_RC_CCK_RATE11M] = DESC_RATE11M,
341 	.maps[RTL_RC_OFDM_RATE6M] = DESC_RATE6M,
342 	.maps[RTL_RC_OFDM_RATE9M] = DESC_RATE9M,
343 	.maps[RTL_RC_OFDM_RATE12M] = DESC_RATE12M,
344 	.maps[RTL_RC_OFDM_RATE18M] = DESC_RATE18M,
345 	.maps[RTL_RC_OFDM_RATE24M] = DESC_RATE24M,
346 	.maps[RTL_RC_OFDM_RATE36M] = DESC_RATE36M,
347 	.maps[RTL_RC_OFDM_RATE48M] = DESC_RATE48M,
348 	.maps[RTL_RC_OFDM_RATE54M] = DESC_RATE54M,
349 
350 	.maps[RTL_RC_HT_RATEMCS7] = DESC_RATEMCS7,
351 	.maps[RTL_RC_HT_RATEMCS15] = DESC_RATEMCS15,
352 };
353 
354 static const struct pci_device_id rtl92de_pci_ids[] = {
355 	{RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8193, rtl92de_hal_cfg)},
356 	{RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x002B, rtl92de_hal_cfg)},
357 	{},
358 };
359 
360 MODULE_DEVICE_TABLE(pci, rtl92de_pci_ids);
361 
362 MODULE_AUTHOR("lizhaoming	<chaoming_li@realsil.com.cn>");
363 MODULE_AUTHOR("Realtek WlanFAE	<wlanfae@realtek.com>");
364 MODULE_AUTHOR("Larry Finger	<Larry.Finger@lwfinger.net>");
365 MODULE_LICENSE("GPL");
366 MODULE_DESCRIPTION("Realtek 8192DE 802.11n Dual Mac PCI wireless");
367 MODULE_FIRMWARE("rtlwifi/rtl8192defw.bin");
368 
369 module_param_named(swenc, rtl92de_mod_params.sw_crypto, bool, 0444);
370 module_param_named(debug_level, rtl92de_mod_params.debug_level, int, 0644);
371 module_param_named(ips, rtl92de_mod_params.inactiveps, bool, 0444);
372 module_param_named(swlps, rtl92de_mod_params.swctrl_lps, bool, 0444);
373 module_param_named(fwlps, rtl92de_mod_params.fwctrl_lps, bool, 0444);
374 module_param_named(aspm, rtl92de_mod_params.aspm_support, int, 0444);
375 module_param_named(debug_mask, rtl92de_mod_params.debug_mask, ullong, 0644);
376 MODULE_PARM_DESC(swenc, "Set to 1 for software crypto (default 0)\n");
377 MODULE_PARM_DESC(ips, "Set to 0 to not use link power save (default 1)\n");
378 MODULE_PARM_DESC(swlps, "Set to 1 to use SW control power save (default 1)\n");
379 MODULE_PARM_DESC(fwlps, "Set to 1 to use FW control power save (default 0)\n");
380 MODULE_PARM_DESC(aspm, "Set to 1 to enable ASPM (default 1)\n");
381 MODULE_PARM_DESC(debug_level, "Set debug level (0-5) (default 0)");
382 MODULE_PARM_DESC(debug_mask, "Set debug mask (default 0)");
383 
384 static SIMPLE_DEV_PM_OPS(rtlwifi_pm_ops, rtl_pci_suspend, rtl_pci_resume);
385 
386 static struct pci_driver rtl92de_driver = {
387 	.name = KBUILD_MODNAME,
388 	.id_table = rtl92de_pci_ids,
389 	.probe = rtl_pci_probe,
390 	.remove = rtl_pci_disconnect,
391 	.driver.pm = &rtlwifi_pm_ops,
392 };
393 
394 /* add global spin lock to solve the problem that
395  * Dul mac register operation on the same time */
396 spinlock_t globalmutex_power;
397 spinlock_t globalmutex_for_fwdownload;
398 spinlock_t globalmutex_for_power_and_efuse;
399 
rtl92de_module_init(void)400 static int __init rtl92de_module_init(void)
401 {
402 	int ret = 0;
403 
404 	spin_lock_init(&globalmutex_power);
405 	spin_lock_init(&globalmutex_for_fwdownload);
406 	spin_lock_init(&globalmutex_for_power_and_efuse);
407 
408 	ret = pci_register_driver(&rtl92de_driver);
409 	if (ret)
410 		WARN_ONCE(true, "rtl8192de: No device found\n");
411 	return ret;
412 }
413 
rtl92de_module_exit(void)414 static void __exit rtl92de_module_exit(void)
415 {
416 	pci_unregister_driver(&rtl92de_driver);
417 }
418 
419 module_init(rtl92de_module_init);
420 module_exit(rtl92de_module_exit);
421