1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * This file is based on code from OCTEON SDK by Cavium Networks.
4 *
5 * Copyright (c) 2003-2010 Cavium Networks
6 */
7
8 #include <linux/module.h>
9 #include <linux/kernel.h>
10 #include <linux/netdevice.h>
11 #include <linux/etherdevice.h>
12 #include <linux/ip.h>
13 #include <linux/ratelimit.h>
14 #include <linux/string.h>
15 #include <linux/interrupt.h>
16 #include <net/dst.h>
17 #ifdef CONFIG_XFRM
18 #include <linux/xfrm.h>
19 #include <net/xfrm.h>
20 #endif /* CONFIG_XFRM */
21
22 #include <linux/atomic.h>
23 #include <net/sch_generic.h>
24
25 #include "octeon-ethernet.h"
26 #include "ethernet-defines.h"
27 #include "ethernet-tx.h"
28 #include "ethernet-util.h"
29
30 #define CVM_OCT_SKB_CB(skb) ((u64 *)((skb)->cb))
31
32 /*
33 * You can define GET_SKBUFF_QOS() to override how the skbuff output
34 * function determines which output queue is used. The default
35 * implementation always uses the base queue for the port. If, for
36 * example, you wanted to use the skb->priority field, define
37 * GET_SKBUFF_QOS as: #define GET_SKBUFF_QOS(skb) ((skb)->priority)
38 */
39 #ifndef GET_SKBUFF_QOS
40 #define GET_SKBUFF_QOS(skb) 0
41 #endif
42
43 static void cvm_oct_tx_do_cleanup(unsigned long arg);
44 static DECLARE_TASKLET_OLD(cvm_oct_tx_cleanup_tasklet, cvm_oct_tx_do_cleanup);
45
46 /* Maximum number of SKBs to try to free per xmit packet. */
47 #define MAX_SKB_TO_FREE (MAX_OUT_QUEUE_DEPTH * 2)
48
cvm_oct_adjust_skb_to_free(int skb_to_free,int fau)49 static inline int cvm_oct_adjust_skb_to_free(int skb_to_free, int fau)
50 {
51 int undo;
52
53 undo = skb_to_free > 0 ? MAX_SKB_TO_FREE : skb_to_free +
54 MAX_SKB_TO_FREE;
55 if (undo > 0)
56 cvmx_fau_atomic_add32(fau, -undo);
57 skb_to_free = -skb_to_free > MAX_SKB_TO_FREE ? MAX_SKB_TO_FREE :
58 -skb_to_free;
59 return skb_to_free;
60 }
61
cvm_oct_kick_tx_poll_watchdog(void)62 static void cvm_oct_kick_tx_poll_watchdog(void)
63 {
64 union cvmx_ciu_timx ciu_timx;
65
66 ciu_timx.u64 = 0;
67 ciu_timx.s.one_shot = 1;
68 ciu_timx.s.len = cvm_oct_tx_poll_interval;
69 cvmx_write_csr(CVMX_CIU_TIMX(1), ciu_timx.u64);
70 }
71
cvm_oct_free_tx_skbs(struct net_device * dev)72 static void cvm_oct_free_tx_skbs(struct net_device *dev)
73 {
74 int skb_to_free;
75 int qos, queues_per_port;
76 int total_remaining = 0;
77 unsigned long flags;
78 struct octeon_ethernet *priv = netdev_priv(dev);
79
80 queues_per_port = cvmx_pko_get_num_queues(priv->port);
81 /* Drain any pending packets in the free list */
82 for (qos = 0; qos < queues_per_port; qos++) {
83 if (skb_queue_len(&priv->tx_free_list[qos]) == 0)
84 continue;
85 skb_to_free = cvmx_fau_fetch_and_add32(priv->fau + qos * 4,
86 MAX_SKB_TO_FREE);
87 skb_to_free = cvm_oct_adjust_skb_to_free(skb_to_free,
88 priv->fau + qos * 4);
89 if (skb_to_free > 0) {
90 struct sk_buff *to_free_list = NULL;
91
92 spin_lock_irqsave(&priv->tx_free_list[qos].lock, flags);
93 while (skb_to_free > 0) {
94 struct sk_buff *t;
95
96 t = __skb_dequeue(&priv->tx_free_list[qos]);
97 t->next = to_free_list;
98 to_free_list = t;
99 skb_to_free--;
100 }
101 spin_unlock_irqrestore(&priv->tx_free_list[qos].lock,
102 flags);
103 /* Do the actual freeing outside of the lock. */
104 while (to_free_list) {
105 struct sk_buff *t = to_free_list;
106
107 to_free_list = to_free_list->next;
108 dev_kfree_skb_any(t);
109 }
110 }
111 total_remaining += skb_queue_len(&priv->tx_free_list[qos]);
112 }
113 if (total_remaining < MAX_OUT_QUEUE_DEPTH && netif_queue_stopped(dev))
114 netif_wake_queue(dev);
115 if (total_remaining)
116 cvm_oct_kick_tx_poll_watchdog();
117 }
118
119 /**
120 * cvm_oct_xmit - transmit a packet
121 * @skb: Packet to send
122 * @dev: Device info structure
123 *
124 * Returns Always returns NETDEV_TX_OK
125 */
cvm_oct_xmit(struct sk_buff * skb,struct net_device * dev)126 netdev_tx_t cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev)
127 {
128 union cvmx_pko_command_word0 pko_command;
129 union cvmx_buf_ptr hw_buffer;
130 u64 old_scratch;
131 u64 old_scratch2;
132 int qos;
133 int i;
134 enum {QUEUE_CORE, QUEUE_HW, QUEUE_DROP} queue_type;
135 struct octeon_ethernet *priv = netdev_priv(dev);
136 struct sk_buff *to_free_list;
137 int skb_to_free;
138 int buffers_to_free;
139 u32 total_to_clean;
140 unsigned long flags;
141 #if REUSE_SKBUFFS_WITHOUT_FREE
142 unsigned char *fpa_head;
143 #endif
144
145 /*
146 * Prefetch the private data structure. It is larger than the
147 * one cache line.
148 */
149 prefetch(priv);
150
151 /*
152 * The check on CVMX_PKO_QUEUES_PER_PORT_* is designed to
153 * completely remove "qos" in the event neither interface
154 * supports multiple queues per port.
155 */
156 if ((CVMX_PKO_QUEUES_PER_PORT_INTERFACE0 > 1) ||
157 (CVMX_PKO_QUEUES_PER_PORT_INTERFACE1 > 1)) {
158 qos = GET_SKBUFF_QOS(skb);
159 if (qos <= 0)
160 qos = 0;
161 else if (qos >= cvmx_pko_get_num_queues(priv->port))
162 qos = 0;
163 } else {
164 qos = 0;
165 }
166
167 if (USE_ASYNC_IOBDMA) {
168 /* Save scratch in case userspace is using it */
169 CVMX_SYNCIOBDMA;
170 old_scratch = cvmx_scratch_read64(CVMX_SCR_SCRATCH);
171 old_scratch2 = cvmx_scratch_read64(CVMX_SCR_SCRATCH + 8);
172
173 /*
174 * Fetch and increment the number of packets to be
175 * freed.
176 */
177 cvmx_fau_async_fetch_and_add32(CVMX_SCR_SCRATCH + 8,
178 FAU_NUM_PACKET_BUFFERS_TO_FREE,
179 0);
180 cvmx_fau_async_fetch_and_add32(CVMX_SCR_SCRATCH,
181 priv->fau + qos * 4,
182 MAX_SKB_TO_FREE);
183 }
184
185 /*
186 * We have space for 6 segment pointers, If there will be more
187 * than that, we must linearize.
188 */
189 if (unlikely(skb_shinfo(skb)->nr_frags > 5)) {
190 if (unlikely(__skb_linearize(skb))) {
191 queue_type = QUEUE_DROP;
192 if (USE_ASYNC_IOBDMA) {
193 /*
194 * Get the number of skbuffs in use
195 * by the hardware
196 */
197 CVMX_SYNCIOBDMA;
198 skb_to_free =
199 cvmx_scratch_read64(CVMX_SCR_SCRATCH);
200 } else {
201 /*
202 * Get the number of skbuffs in use
203 * by the hardware
204 */
205 skb_to_free =
206 cvmx_fau_fetch_and_add32(priv->fau +
207 qos * 4,
208 MAX_SKB_TO_FREE);
209 }
210 skb_to_free = cvm_oct_adjust_skb_to_free(skb_to_free,
211 priv->fau +
212 qos * 4);
213 spin_lock_irqsave(&priv->tx_free_list[qos].lock, flags);
214 goto skip_xmit;
215 }
216 }
217
218 /*
219 * The CN3XXX series of parts has an errata (GMX-401) which
220 * causes the GMX block to hang if a collision occurs towards
221 * the end of a <68 byte packet. As a workaround for this, we
222 * pad packets to be 68 bytes whenever we are in half duplex
223 * mode. We don't handle the case of having a small packet but
224 * no room to add the padding. The kernel should always give
225 * us at least a cache line
226 */
227 if ((skb->len < 64) && OCTEON_IS_MODEL(OCTEON_CN3XXX)) {
228 union cvmx_gmxx_prtx_cfg gmx_prt_cfg;
229 int interface = INTERFACE(priv->port);
230 int index = INDEX(priv->port);
231
232 if (interface < 2) {
233 /* We only need to pad packet in half duplex mode */
234 gmx_prt_cfg.u64 =
235 cvmx_read_csr(CVMX_GMXX_PRTX_CFG(index, interface));
236 if (gmx_prt_cfg.s.duplex == 0) {
237 int add_bytes = 64 - skb->len;
238
239 if ((skb_tail_pointer(skb) + add_bytes) <=
240 skb_end_pointer(skb))
241 __skb_put_zero(skb, add_bytes);
242 }
243 }
244 }
245
246 /* Build the PKO command */
247 pko_command.u64 = 0;
248 #ifdef __LITTLE_ENDIAN
249 pko_command.s.le = 1;
250 #endif
251 pko_command.s.n2 = 1; /* Don't pollute L2 with the outgoing packet */
252 pko_command.s.segs = 1;
253 pko_command.s.total_bytes = skb->len;
254 pko_command.s.size0 = CVMX_FAU_OP_SIZE_32;
255 pko_command.s.subone0 = 1;
256
257 pko_command.s.dontfree = 1;
258
259 /* Build the PKO buffer pointer */
260 hw_buffer.u64 = 0;
261 if (skb_shinfo(skb)->nr_frags == 0) {
262 hw_buffer.s.addr = XKPHYS_TO_PHYS((uintptr_t)skb->data);
263 hw_buffer.s.pool = 0;
264 hw_buffer.s.size = skb->len;
265 } else {
266 hw_buffer.s.addr = XKPHYS_TO_PHYS((uintptr_t)skb->data);
267 hw_buffer.s.pool = 0;
268 hw_buffer.s.size = skb_headlen(skb);
269 CVM_OCT_SKB_CB(skb)[0] = hw_buffer.u64;
270 for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
271 skb_frag_t *fs = skb_shinfo(skb)->frags + i;
272
273 hw_buffer.s.addr =
274 XKPHYS_TO_PHYS((uintptr_t)skb_frag_address(fs));
275 hw_buffer.s.size = skb_frag_size(fs);
276 CVM_OCT_SKB_CB(skb)[i + 1] = hw_buffer.u64;
277 }
278 hw_buffer.s.addr =
279 XKPHYS_TO_PHYS((uintptr_t)CVM_OCT_SKB_CB(skb));
280 hw_buffer.s.size = skb_shinfo(skb)->nr_frags + 1;
281 pko_command.s.segs = skb_shinfo(skb)->nr_frags + 1;
282 pko_command.s.gather = 1;
283 goto dont_put_skbuff_in_hw;
284 }
285
286 /*
287 * See if we can put this skb in the FPA pool. Any strange
288 * behavior from the Linux networking stack will most likely
289 * be caused by a bug in the following code. If some field is
290 * in use by the network stack and gets carried over when a
291 * buffer is reused, bad things may happen. If in doubt and
292 * you dont need the absolute best performance, disable the
293 * define REUSE_SKBUFFS_WITHOUT_FREE. The reuse of buffers has
294 * shown a 25% increase in performance under some loads.
295 */
296 #if REUSE_SKBUFFS_WITHOUT_FREE
297 fpa_head = skb->head + 256 - ((unsigned long)skb->head & 0x7f);
298 if (unlikely(skb->data < fpa_head)) {
299 /* TX buffer beginning can't meet FPA alignment constraints */
300 goto dont_put_skbuff_in_hw;
301 }
302 if (unlikely
303 ((skb_end_pointer(skb) - fpa_head) < CVMX_FPA_PACKET_POOL_SIZE)) {
304 /* TX buffer isn't large enough for the FPA */
305 goto dont_put_skbuff_in_hw;
306 }
307 if (unlikely(skb_shared(skb))) {
308 /* TX buffer sharing data with someone else */
309 goto dont_put_skbuff_in_hw;
310 }
311 if (unlikely(skb_cloned(skb))) {
312 /* TX buffer has been cloned */
313 goto dont_put_skbuff_in_hw;
314 }
315 if (unlikely(skb_header_cloned(skb))) {
316 /* TX buffer header has been cloned */
317 goto dont_put_skbuff_in_hw;
318 }
319 if (unlikely(skb->destructor)) {
320 /* TX buffer has a destructor */
321 goto dont_put_skbuff_in_hw;
322 }
323 if (unlikely(skb_shinfo(skb)->nr_frags)) {
324 /* TX buffer has fragments */
325 goto dont_put_skbuff_in_hw;
326 }
327 if (unlikely
328 (skb->truesize !=
329 sizeof(*skb) + skb_end_offset(skb))) {
330 /* TX buffer truesize has been changed */
331 goto dont_put_skbuff_in_hw;
332 }
333
334 /*
335 * We can use this buffer in the FPA. We don't need the FAU
336 * update anymore
337 */
338 pko_command.s.dontfree = 0;
339
340 hw_buffer.s.back = ((unsigned long)skb->data >> 7) -
341 ((unsigned long)fpa_head >> 7);
342
343 *(struct sk_buff **)(fpa_head - sizeof(void *)) = skb;
344
345 /*
346 * The skbuff will be reused without ever being freed. We must
347 * cleanup a bunch of core things.
348 */
349 dst_release(skb_dst(skb));
350 skb_dst_set(skb, NULL);
351 skb_ext_reset(skb);
352 nf_reset_ct(skb);
353 skb_reset_redirect(skb);
354
355 #ifdef CONFIG_NET_SCHED
356 skb->tc_index = 0;
357 #endif /* CONFIG_NET_SCHED */
358 #endif /* REUSE_SKBUFFS_WITHOUT_FREE */
359
360 dont_put_skbuff_in_hw:
361
362 /* Check if we can use the hardware checksumming */
363 if ((skb->protocol == htons(ETH_P_IP)) &&
364 (ip_hdr(skb)->version == 4) &&
365 (ip_hdr(skb)->ihl == 5) &&
366 ((ip_hdr(skb)->frag_off == 0) ||
367 (ip_hdr(skb)->frag_off == htons(1 << 14))) &&
368 ((ip_hdr(skb)->protocol == IPPROTO_TCP) ||
369 (ip_hdr(skb)->protocol == IPPROTO_UDP))) {
370 /* Use hardware checksum calc */
371 pko_command.s.ipoffp1 = skb_network_offset(skb) + 1;
372 }
373
374 if (USE_ASYNC_IOBDMA) {
375 /* Get the number of skbuffs in use by the hardware */
376 CVMX_SYNCIOBDMA;
377 skb_to_free = cvmx_scratch_read64(CVMX_SCR_SCRATCH);
378 buffers_to_free = cvmx_scratch_read64(CVMX_SCR_SCRATCH + 8);
379 } else {
380 /* Get the number of skbuffs in use by the hardware */
381 skb_to_free = cvmx_fau_fetch_and_add32(priv->fau + qos * 4,
382 MAX_SKB_TO_FREE);
383 buffers_to_free =
384 cvmx_fau_fetch_and_add32(FAU_NUM_PACKET_BUFFERS_TO_FREE, 0);
385 }
386
387 skb_to_free = cvm_oct_adjust_skb_to_free(skb_to_free,
388 priv->fau + qos * 4);
389
390 /*
391 * If we're sending faster than the receive can free them then
392 * don't do the HW free.
393 */
394 if ((buffers_to_free < -100) && !pko_command.s.dontfree)
395 pko_command.s.dontfree = 1;
396
397 if (pko_command.s.dontfree) {
398 queue_type = QUEUE_CORE;
399 pko_command.s.reg0 = priv->fau + qos * 4;
400 } else {
401 queue_type = QUEUE_HW;
402 }
403 if (USE_ASYNC_IOBDMA)
404 cvmx_fau_async_fetch_and_add32(CVMX_SCR_SCRATCH,
405 FAU_TOTAL_TX_TO_CLEAN, 1);
406
407 spin_lock_irqsave(&priv->tx_free_list[qos].lock, flags);
408
409 /* Drop this packet if we have too many already queued to the HW */
410 if (unlikely(skb_queue_len(&priv->tx_free_list[qos]) >=
411 MAX_OUT_QUEUE_DEPTH)) {
412 if (dev->tx_queue_len != 0) {
413 /* Drop the lock when notifying the core. */
414 spin_unlock_irqrestore(&priv->tx_free_list[qos].lock,
415 flags);
416 netif_stop_queue(dev);
417 spin_lock_irqsave(&priv->tx_free_list[qos].lock,
418 flags);
419 } else {
420 /* If not using normal queueing. */
421 queue_type = QUEUE_DROP;
422 goto skip_xmit;
423 }
424 }
425
426 cvmx_pko_send_packet_prepare(priv->port, priv->queue + qos,
427 CVMX_PKO_LOCK_NONE);
428
429 /* Send the packet to the output queue */
430 if (unlikely(cvmx_pko_send_packet_finish(priv->port,
431 priv->queue + qos,
432 pko_command, hw_buffer,
433 CVMX_PKO_LOCK_NONE))) {
434 printk_ratelimited("%s: Failed to send the packet\n",
435 dev->name);
436 queue_type = QUEUE_DROP;
437 }
438 skip_xmit:
439 to_free_list = NULL;
440
441 switch (queue_type) {
442 case QUEUE_DROP:
443 skb->next = to_free_list;
444 to_free_list = skb;
445 dev->stats.tx_dropped++;
446 break;
447 case QUEUE_HW:
448 cvmx_fau_atomic_add32(FAU_NUM_PACKET_BUFFERS_TO_FREE, -1);
449 break;
450 case QUEUE_CORE:
451 __skb_queue_tail(&priv->tx_free_list[qos], skb);
452 break;
453 default:
454 BUG();
455 }
456
457 while (skb_to_free > 0) {
458 struct sk_buff *t = __skb_dequeue(&priv->tx_free_list[qos]);
459
460 t->next = to_free_list;
461 to_free_list = t;
462 skb_to_free--;
463 }
464
465 spin_unlock_irqrestore(&priv->tx_free_list[qos].lock, flags);
466
467 /* Do the actual freeing outside of the lock. */
468 while (to_free_list) {
469 struct sk_buff *t = to_free_list;
470
471 to_free_list = to_free_list->next;
472 dev_kfree_skb_any(t);
473 }
474
475 if (USE_ASYNC_IOBDMA) {
476 CVMX_SYNCIOBDMA;
477 total_to_clean = cvmx_scratch_read64(CVMX_SCR_SCRATCH);
478 /* Restore the scratch area */
479 cvmx_scratch_write64(CVMX_SCR_SCRATCH, old_scratch);
480 cvmx_scratch_write64(CVMX_SCR_SCRATCH + 8, old_scratch2);
481 } else {
482 total_to_clean =
483 cvmx_fau_fetch_and_add32(FAU_TOTAL_TX_TO_CLEAN, 1);
484 }
485
486 if (total_to_clean & 0x3ff) {
487 /*
488 * Schedule the cleanup tasklet every 1024 packets for
489 * the pathological case of high traffic on one port
490 * delaying clean up of packets on a different port
491 * that is blocked waiting for the cleanup.
492 */
493 tasklet_schedule(&cvm_oct_tx_cleanup_tasklet);
494 }
495
496 cvm_oct_kick_tx_poll_watchdog();
497
498 return NETDEV_TX_OK;
499 }
500
501 /**
502 * cvm_oct_xmit_pow - transmit a packet to the POW
503 * @skb: Packet to send
504 * @dev: Device info structure
505 * Returns Always returns zero
506 */
cvm_oct_xmit_pow(struct sk_buff * skb,struct net_device * dev)507 netdev_tx_t cvm_oct_xmit_pow(struct sk_buff *skb, struct net_device *dev)
508 {
509 struct octeon_ethernet *priv = netdev_priv(dev);
510 void *packet_buffer;
511 void *copy_location;
512
513 /* Get a work queue entry */
514 struct cvmx_wqe *work = cvmx_fpa_alloc(CVMX_FPA_WQE_POOL);
515
516 if (unlikely(!work)) {
517 printk_ratelimited("%s: Failed to allocate a work queue entry\n",
518 dev->name);
519 dev->stats.tx_dropped++;
520 dev_kfree_skb_any(skb);
521 return 0;
522 }
523
524 /* Get a packet buffer */
525 packet_buffer = cvmx_fpa_alloc(CVMX_FPA_PACKET_POOL);
526 if (unlikely(!packet_buffer)) {
527 printk_ratelimited("%s: Failed to allocate a packet buffer\n",
528 dev->name);
529 cvmx_fpa_free(work, CVMX_FPA_WQE_POOL, 1);
530 dev->stats.tx_dropped++;
531 dev_kfree_skb_any(skb);
532 return 0;
533 }
534
535 /*
536 * Calculate where we need to copy the data to. We need to
537 * leave 8 bytes for a next pointer (unused). We also need to
538 * include any configure skip. Then we need to align the IP
539 * packet src and dest into the same 64bit word. The below
540 * calculation may add a little extra, but that doesn't
541 * hurt.
542 */
543 copy_location = packet_buffer + sizeof(u64);
544 copy_location += ((CVMX_HELPER_FIRST_MBUFF_SKIP + 7) & 0xfff8) + 6;
545
546 /*
547 * We have to copy the packet since whoever processes this
548 * packet will free it to a hardware pool. We can't use the
549 * trick of counting outstanding packets like in
550 * cvm_oct_xmit.
551 */
552 memcpy(copy_location, skb->data, skb->len);
553
554 /*
555 * Fill in some of the work queue fields. We may need to add
556 * more if the software at the other end needs them.
557 */
558 if (!OCTEON_IS_MODEL(OCTEON_CN68XX))
559 work->word0.pip.cn38xx.hw_chksum = skb->csum;
560 work->word1.len = skb->len;
561 cvmx_wqe_set_port(work, priv->port);
562 cvmx_wqe_set_qos(work, priv->port & 0x7);
563 cvmx_wqe_set_grp(work, pow_send_group);
564 work->word1.tag_type = CVMX_HELPER_INPUT_TAG_TYPE;
565 work->word1.tag = pow_send_group; /* FIXME */
566 /* Default to zero. Sets of zero later are commented out */
567 work->word2.u64 = 0;
568 work->word2.s.bufs = 1;
569 work->packet_ptr.u64 = 0;
570 work->packet_ptr.s.addr = cvmx_ptr_to_phys(copy_location);
571 work->packet_ptr.s.pool = CVMX_FPA_PACKET_POOL;
572 work->packet_ptr.s.size = CVMX_FPA_PACKET_POOL_SIZE;
573 work->packet_ptr.s.back = (copy_location - packet_buffer) >> 7;
574
575 if (skb->protocol == htons(ETH_P_IP)) {
576 work->word2.s.ip_offset = 14;
577 #if 0
578 work->word2.s.vlan_valid = 0; /* FIXME */
579 work->word2.s.vlan_cfi = 0; /* FIXME */
580 work->word2.s.vlan_id = 0; /* FIXME */
581 work->word2.s.dec_ipcomp = 0; /* FIXME */
582 #endif
583 work->word2.s.tcp_or_udp =
584 (ip_hdr(skb)->protocol == IPPROTO_TCP) ||
585 (ip_hdr(skb)->protocol == IPPROTO_UDP);
586 #if 0
587 /* FIXME */
588 work->word2.s.dec_ipsec = 0;
589 /* We only support IPv4 right now */
590 work->word2.s.is_v6 = 0;
591 /* Hardware would set to zero */
592 work->word2.s.software = 0;
593 /* No error, packet is internal */
594 work->word2.s.L4_error = 0;
595 #endif
596 work->word2.s.is_frag = !((ip_hdr(skb)->frag_off == 0) ||
597 (ip_hdr(skb)->frag_off ==
598 cpu_to_be16(1 << 14)));
599 #if 0
600 /* Assume Linux is sending a good packet */
601 work->word2.s.IP_exc = 0;
602 #endif
603 work->word2.s.is_bcast = (skb->pkt_type == PACKET_BROADCAST);
604 work->word2.s.is_mcast = (skb->pkt_type == PACKET_MULTICAST);
605 #if 0
606 /* This is an IP packet */
607 work->word2.s.not_IP = 0;
608 /* No error, packet is internal */
609 work->word2.s.rcv_error = 0;
610 /* No error, packet is internal */
611 work->word2.s.err_code = 0;
612 #endif
613
614 /*
615 * When copying the data, include 4 bytes of the
616 * ethernet header to align the same way hardware
617 * does.
618 */
619 memcpy(work->packet_data, skb->data + 10,
620 sizeof(work->packet_data));
621 } else {
622 #if 0
623 work->word2.snoip.vlan_valid = 0; /* FIXME */
624 work->word2.snoip.vlan_cfi = 0; /* FIXME */
625 work->word2.snoip.vlan_id = 0; /* FIXME */
626 work->word2.snoip.software = 0; /* Hardware would set to zero */
627 #endif
628 work->word2.snoip.is_rarp = skb->protocol == htons(ETH_P_RARP);
629 work->word2.snoip.is_arp = skb->protocol == htons(ETH_P_ARP);
630 work->word2.snoip.is_bcast =
631 (skb->pkt_type == PACKET_BROADCAST);
632 work->word2.snoip.is_mcast =
633 (skb->pkt_type == PACKET_MULTICAST);
634 work->word2.snoip.not_IP = 1; /* IP was done up above */
635 #if 0
636 /* No error, packet is internal */
637 work->word2.snoip.rcv_error = 0;
638 /* No error, packet is internal */
639 work->word2.snoip.err_code = 0;
640 #endif
641 memcpy(work->packet_data, skb->data, sizeof(work->packet_data));
642 }
643
644 /* Submit the packet to the POW */
645 cvmx_pow_work_submit(work, work->word1.tag, work->word1.tag_type,
646 cvmx_wqe_get_qos(work), cvmx_wqe_get_grp(work));
647 dev->stats.tx_packets++;
648 dev->stats.tx_bytes += skb->len;
649 dev_consume_skb_any(skb);
650 return 0;
651 }
652
653 /**
654 * cvm_oct_tx_shutdown_dev - free all skb that are currently queued for TX.
655 * @dev: Device being shutdown
656 *
657 */
cvm_oct_tx_shutdown_dev(struct net_device * dev)658 void cvm_oct_tx_shutdown_dev(struct net_device *dev)
659 {
660 struct octeon_ethernet *priv = netdev_priv(dev);
661 unsigned long flags;
662 int qos;
663
664 for (qos = 0; qos < 16; qos++) {
665 spin_lock_irqsave(&priv->tx_free_list[qos].lock, flags);
666 while (skb_queue_len(&priv->tx_free_list[qos]))
667 dev_kfree_skb_any(__skb_dequeue
668 (&priv->tx_free_list[qos]));
669 spin_unlock_irqrestore(&priv->tx_free_list[qos].lock, flags);
670 }
671 }
672
cvm_oct_tx_do_cleanup(unsigned long arg)673 static void cvm_oct_tx_do_cleanup(unsigned long arg)
674 {
675 int port;
676
677 for (port = 0; port < TOTAL_NUMBER_OF_PORTS; port++) {
678 if (cvm_oct_device[port]) {
679 struct net_device *dev = cvm_oct_device[port];
680
681 cvm_oct_free_tx_skbs(dev);
682 }
683 }
684 }
685
cvm_oct_tx_cleanup_watchdog(int cpl,void * dev_id)686 static irqreturn_t cvm_oct_tx_cleanup_watchdog(int cpl, void *dev_id)
687 {
688 /* Disable the interrupt. */
689 cvmx_write_csr(CVMX_CIU_TIMX(1), 0);
690 /* Do the work in the tasklet. */
691 tasklet_schedule(&cvm_oct_tx_cleanup_tasklet);
692 return IRQ_HANDLED;
693 }
694
cvm_oct_tx_initialize(void)695 void cvm_oct_tx_initialize(void)
696 {
697 int i;
698
699 /* Disable the interrupt. */
700 cvmx_write_csr(CVMX_CIU_TIMX(1), 0);
701 /* Register an IRQ handler to receive CIU_TIMX(1) interrupts */
702 i = request_irq(OCTEON_IRQ_TIMER1,
703 cvm_oct_tx_cleanup_watchdog, 0,
704 "Ethernet", cvm_oct_device);
705
706 if (i)
707 panic("Could not acquire Ethernet IRQ %d\n", OCTEON_IRQ_TIMER1);
708 }
709
cvm_oct_tx_shutdown(void)710 void cvm_oct_tx_shutdown(void)
711 {
712 /* Free the interrupt handler */
713 free_irq(OCTEON_IRQ_TIMER1, cvm_oct_device);
714 }
715
