1// SPDX-License-Identifier: GPL-2.0+ 2// 3// Copyright 2012 Sascha Hauer, Pengutronix 4 5#include "imx27-pinfunc.h" 6 7#include <dt-bindings/clock/imx27-clock.h> 8#include <dt-bindings/gpio/gpio.h> 9#include <dt-bindings/input/input.h> 10#include <dt-bindings/interrupt-controller/irq.h> 11 12/ { 13 #address-cells = <1>; 14 #size-cells = <1>; 15 /* 16 * The decompressor and also some bootloaders rely on a 17 * pre-existing /chosen node to be available to insert the 18 * command line and merge other ATAGS info. 19 */ 20 chosen {}; 21 22 aliases { 23 ethernet0 = &fec; 24 gpio0 = &gpio1; 25 gpio1 = &gpio2; 26 gpio2 = &gpio3; 27 gpio3 = &gpio4; 28 gpio4 = &gpio5; 29 gpio5 = &gpio6; 30 i2c0 = &i2c1; 31 i2c1 = &i2c2; 32 serial0 = &uart1; 33 serial1 = &uart2; 34 serial2 = &uart3; 35 serial3 = &uart4; 36 serial4 = &uart5; 37 serial5 = &uart6; 38 spi0 = &cspi1; 39 spi1 = &cspi2; 40 spi2 = &cspi3; 41 }; 42 43 aitc: aitc-interrupt-controller@10040000 { 44 compatible = "fsl,imx27-aitc", "fsl,avic"; 45 interrupt-controller; 46 #interrupt-cells = <1>; 47 reg = <0x10040000 0x1000>; 48 }; 49 50 clocks { 51 clk_osc26m: osc26m { 52 compatible = "fsl,imx-osc26m", "fixed-clock"; 53 #clock-cells = <0>; 54 clock-frequency = <26000000>; 55 }; 56 }; 57 58 cpus { 59 #size-cells = <0>; 60 #address-cells = <1>; 61 62 cpu: cpu@0 { 63 device_type = "cpu"; 64 reg = <0>; 65 compatible = "arm,arm926ej-s"; 66 operating-points = < 67 /* kHz uV */ 68 266000 1300000 69 399000 1450000 70 >; 71 clock-latency = <62500>; 72 clocks = <&clks IMX27_CLK_CPU_DIV>; 73 voltage-tolerance = <5>; 74 }; 75 }; 76 77 soc: soc { 78 #address-cells = <1>; 79 #size-cells = <1>; 80 compatible = "simple-bus"; 81 interrupt-parent = <&aitc>; 82 ranges; 83 84 aipi1: aipi@10000000 { /* AIPI1 */ 85 compatible = "fsl,aipi-bus", "simple-bus"; 86 #address-cells = <1>; 87 #size-cells = <1>; 88 reg = <0x10000000 0x20000>; 89 ranges; 90 91 dma: dma@10001000 { 92 compatible = "fsl,imx27-dma"; 93 reg = <0x10001000 0x1000>; 94 interrupts = <32>; 95 clocks = <&clks IMX27_CLK_DMA_IPG_GATE>, 96 <&clks IMX27_CLK_DMA_AHB_GATE>; 97 clock-names = "ipg", "ahb"; 98 #dma-cells = <1>; 99 dma-channels = <16>; 100 }; 101 102 wdog: watchdog@10002000 { 103 compatible = "fsl,imx27-wdt", "fsl,imx21-wdt"; 104 reg = <0x10002000 0x1000>; 105 interrupts = <27>; 106 clocks = <&clks IMX27_CLK_WDOG_IPG_GATE>; 107 }; 108 109 gpt1: timer@10003000 { 110 compatible = "fsl,imx27-gpt", "fsl,imx21-gpt"; 111 reg = <0x10003000 0x1000>; 112 interrupts = <26>; 113 clocks = <&clks IMX27_CLK_GPT1_IPG_GATE>, 114 <&clks IMX27_CLK_PER1_GATE>; 115 clock-names = "ipg", "per"; 116 }; 117 118 gpt2: timer@10004000 { 119 compatible = "fsl,imx27-gpt", "fsl,imx21-gpt"; 120 reg = <0x10004000 0x1000>; 121 interrupts = <25>; 122 clocks = <&clks IMX27_CLK_GPT2_IPG_GATE>, 123 <&clks IMX27_CLK_PER1_GATE>; 124 clock-names = "ipg", "per"; 125 }; 126 127 gpt3: timer@10005000 { 128 compatible = "fsl,imx27-gpt", "fsl,imx21-gpt"; 129 reg = <0x10005000 0x1000>; 130 interrupts = <24>; 131 clocks = <&clks IMX27_CLK_GPT3_IPG_GATE>, 132 <&clks IMX27_CLK_PER1_GATE>; 133 clock-names = "ipg", "per"; 134 }; 135 136 pwm: pwm@10006000 { 137 #pwm-cells = <3>; 138 compatible = "fsl,imx27-pwm"; 139 reg = <0x10006000 0x1000>; 140 interrupts = <23>; 141 clocks = <&clks IMX27_CLK_PWM_IPG_GATE>, 142 <&clks IMX27_CLK_PER1_GATE>; 143 clock-names = "ipg", "per"; 144 }; 145 146 rtc: rtc@10007000 { 147 compatible = "fsl,imx21-rtc"; 148 reg = <0x10007000 0x1000>; 149 interrupts = <22>; 150 clocks = <&clks IMX27_CLK_CKIL>, 151 <&clks IMX27_CLK_RTC_IPG_GATE>; 152 clock-names = "ref", "ipg"; 153 }; 154 155 kpp: kpp@10008000 { 156 compatible = "fsl,imx27-kpp", "fsl,imx21-kpp"; 157 reg = <0x10008000 0x1000>; 158 interrupts = <21>; 159 clocks = <&clks IMX27_CLK_KPP_IPG_GATE>; 160 status = "disabled"; 161 }; 162 163 owire: owire@10009000 { 164 compatible = "fsl,imx27-owire", "fsl,imx21-owire"; 165 reg = <0x10009000 0x1000>; 166 clocks = <&clks IMX27_CLK_OWIRE_IPG_GATE>; 167 status = "disabled"; 168 }; 169 170 uart1: serial@1000a000 { 171 compatible = "fsl,imx27-uart", "fsl,imx21-uart"; 172 reg = <0x1000a000 0x1000>; 173 interrupts = <20>; 174 clocks = <&clks IMX27_CLK_UART1_IPG_GATE>, 175 <&clks IMX27_CLK_PER1_GATE>; 176 clock-names = "ipg", "per"; 177 status = "disabled"; 178 }; 179 180 uart2: serial@1000b000 { 181 compatible = "fsl,imx27-uart", "fsl,imx21-uart"; 182 reg = <0x1000b000 0x1000>; 183 interrupts = <19>; 184 clocks = <&clks IMX27_CLK_UART2_IPG_GATE>, 185 <&clks IMX27_CLK_PER1_GATE>; 186 clock-names = "ipg", "per"; 187 status = "disabled"; 188 }; 189 190 uart3: serial@1000c000 { 191 compatible = "fsl,imx27-uart", "fsl,imx21-uart"; 192 reg = <0x1000c000 0x1000>; 193 interrupts = <18>; 194 clocks = <&clks IMX27_CLK_UART3_IPG_GATE>, 195 <&clks IMX27_CLK_PER1_GATE>; 196 clock-names = "ipg", "per"; 197 status = "disabled"; 198 }; 199 200 uart4: serial@1000d000 { 201 compatible = "fsl,imx27-uart", "fsl,imx21-uart"; 202 reg = <0x1000d000 0x1000>; 203 interrupts = <17>; 204 clocks = <&clks IMX27_CLK_UART4_IPG_GATE>, 205 <&clks IMX27_CLK_PER1_GATE>; 206 clock-names = "ipg", "per"; 207 status = "disabled"; 208 }; 209 210 cspi1: spi@1000e000 { 211 #address-cells = <1>; 212 #size-cells = <0>; 213 compatible = "fsl,imx27-cspi"; 214 reg = <0x1000e000 0x1000>; 215 interrupts = <16>; 216 clocks = <&clks IMX27_CLK_CSPI1_IPG_GATE>, 217 <&clks IMX27_CLK_PER2_GATE>; 218 clock-names = "ipg", "per"; 219 status = "disabled"; 220 }; 221 222 cspi2: spi@1000f000 { 223 #address-cells = <1>; 224 #size-cells = <0>; 225 compatible = "fsl,imx27-cspi"; 226 reg = <0x1000f000 0x1000>; 227 interrupts = <15>; 228 clocks = <&clks IMX27_CLK_CSPI2_IPG_GATE>, 229 <&clks IMX27_CLK_PER2_GATE>; 230 clock-names = "ipg", "per"; 231 status = "disabled"; 232 }; 233 234 ssi1: ssi@10010000 { 235 #sound-dai-cells = <0>; 236 compatible = "fsl,imx27-ssi", "fsl,imx21-ssi"; 237 reg = <0x10010000 0x1000>; 238 interrupts = <14>; 239 clocks = <&clks IMX27_CLK_SSI1_IPG_GATE>; 240 dmas = <&dma 12>, <&dma 13>, <&dma 14>, <&dma 15>; 241 dma-names = "rx0", "tx0", "rx1", "tx1"; 242 fsl,fifo-depth = <8>; 243 status = "disabled"; 244 }; 245 246 ssi2: ssi@10011000 { 247 #sound-dai-cells = <0>; 248 compatible = "fsl,imx27-ssi", "fsl,imx21-ssi"; 249 reg = <0x10011000 0x1000>; 250 interrupts = <13>; 251 clocks = <&clks IMX27_CLK_SSI2_IPG_GATE>; 252 dmas = <&dma 8>, <&dma 9>, <&dma 10>, <&dma 11>; 253 dma-names = "rx0", "tx0", "rx1", "tx1"; 254 fsl,fifo-depth = <8>; 255 status = "disabled"; 256 }; 257 258 i2c1: i2c@10012000 { 259 #address-cells = <1>; 260 #size-cells = <0>; 261 compatible = "fsl,imx27-i2c", "fsl,imx21-i2c"; 262 reg = <0x10012000 0x1000>; 263 interrupts = <12>; 264 clocks = <&clks IMX27_CLK_I2C1_IPG_GATE>; 265 status = "disabled"; 266 }; 267 268 sdhci1: mmc@10013000 { 269 compatible = "fsl,imx27-mmc", "fsl,imx21-mmc"; 270 reg = <0x10013000 0x1000>; 271 interrupts = <11>; 272 clocks = <&clks IMX27_CLK_SDHC1_IPG_GATE>, 273 <&clks IMX27_CLK_PER2_GATE>; 274 clock-names = "ipg", "per"; 275 dmas = <&dma 7>; 276 dma-names = "rx-tx"; 277 status = "disabled"; 278 }; 279 280 sdhci2: mmc@10014000 { 281 compatible = "fsl,imx27-mmc", "fsl,imx21-mmc"; 282 reg = <0x10014000 0x1000>; 283 interrupts = <10>; 284 clocks = <&clks IMX27_CLK_SDHC2_IPG_GATE>, 285 <&clks IMX27_CLK_PER2_GATE>; 286 clock-names = "ipg", "per"; 287 dmas = <&dma 6>; 288 dma-names = "rx-tx"; 289 status = "disabled"; 290 }; 291 292 iomuxc: iomuxc@10015000 { 293 compatible = "fsl,imx27-iomuxc"; 294 reg = <0x10015000 0x600>; 295 #address-cells = <1>; 296 #size-cells = <1>; 297 ranges; 298 299 gpio1: gpio@10015000 { 300 compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; 301 reg = <0x10015000 0x100>; 302 clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>; 303 interrupts = <8>; 304 gpio-controller; 305 #gpio-cells = <2>; 306 interrupt-controller; 307 #interrupt-cells = <2>; 308 }; 309 310 gpio2: gpio@10015100 { 311 compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; 312 reg = <0x10015100 0x100>; 313 clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>; 314 interrupts = <8>; 315 gpio-controller; 316 #gpio-cells = <2>; 317 interrupt-controller; 318 #interrupt-cells = <2>; 319 }; 320 321 gpio3: gpio@10015200 { 322 compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; 323 reg = <0x10015200 0x100>; 324 clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>; 325 interrupts = <8>; 326 gpio-controller; 327 #gpio-cells = <2>; 328 interrupt-controller; 329 #interrupt-cells = <2>; 330 }; 331 332 gpio4: gpio@10015300 { 333 compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; 334 reg = <0x10015300 0x100>; 335 clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>; 336 interrupts = <8>; 337 gpio-controller; 338 #gpio-cells = <2>; 339 interrupt-controller; 340 #interrupt-cells = <2>; 341 }; 342 343 gpio5: gpio@10015400 { 344 compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; 345 reg = <0x10015400 0x100>; 346 clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>; 347 interrupts = <8>; 348 gpio-controller; 349 #gpio-cells = <2>; 350 interrupt-controller; 351 #interrupt-cells = <2>; 352 }; 353 354 gpio6: gpio@10015500 { 355 compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; 356 reg = <0x10015500 0x100>; 357 clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>; 358 interrupts = <8>; 359 gpio-controller; 360 #gpio-cells = <2>; 361 interrupt-controller; 362 #interrupt-cells = <2>; 363 }; 364 }; 365 366 audmux: audmux@10016000 { 367 compatible = "fsl,imx27-audmux", "fsl,imx21-audmux"; 368 reg = <0x10016000 0x1000>; 369 clocks = <&clks IMX27_CLK_DUMMY>; 370 clock-names = "audmux"; 371 status = "disabled"; 372 }; 373 374 cspi3: spi@10017000 { 375 #address-cells = <1>; 376 #size-cells = <0>; 377 compatible = "fsl,imx27-cspi"; 378 reg = <0x10017000 0x1000>; 379 interrupts = <6>; 380 clocks = <&clks IMX27_CLK_CSPI3_IPG_GATE>, 381 <&clks IMX27_CLK_PER2_GATE>; 382 clock-names = "ipg", "per"; 383 status = "disabled"; 384 }; 385 386 gpt4: timer@10019000 { 387 compatible = "fsl,imx27-gpt", "fsl,imx21-gpt"; 388 reg = <0x10019000 0x1000>; 389 interrupts = <4>; 390 clocks = <&clks IMX27_CLK_GPT4_IPG_GATE>, 391 <&clks IMX27_CLK_PER1_GATE>; 392 clock-names = "ipg", "per"; 393 }; 394 395 gpt5: timer@1001a000 { 396 compatible = "fsl,imx27-gpt", "fsl,imx21-gpt"; 397 reg = <0x1001a000 0x1000>; 398 interrupts = <3>; 399 clocks = <&clks IMX27_CLK_GPT5_IPG_GATE>, 400 <&clks IMX27_CLK_PER1_GATE>; 401 clock-names = "ipg", "per"; 402 }; 403 404 uart5: serial@1001b000 { 405 compatible = "fsl,imx27-uart", "fsl,imx21-uart"; 406 reg = <0x1001b000 0x1000>; 407 interrupts = <49>; 408 clocks = <&clks IMX27_CLK_UART5_IPG_GATE>, 409 <&clks IMX27_CLK_PER1_GATE>; 410 clock-names = "ipg", "per"; 411 status = "disabled"; 412 }; 413 414 uart6: serial@1001c000 { 415 compatible = "fsl,imx27-uart", "fsl,imx21-uart"; 416 reg = <0x1001c000 0x1000>; 417 interrupts = <48>; 418 clocks = <&clks IMX27_CLK_UART6_IPG_GATE>, 419 <&clks IMX27_CLK_PER1_GATE>; 420 clock-names = "ipg", "per"; 421 status = "disabled"; 422 }; 423 424 i2c2: i2c@1001d000 { 425 #address-cells = <1>; 426 #size-cells = <0>; 427 compatible = "fsl,imx27-i2c", "fsl,imx21-i2c"; 428 reg = <0x1001d000 0x1000>; 429 interrupts = <1>; 430 clocks = <&clks IMX27_CLK_I2C2_IPG_GATE>; 431 status = "disabled"; 432 }; 433 434 sdhci3: mmc@1001e000 { 435 compatible = "fsl,imx27-mmc", "fsl,imx21-mmc"; 436 reg = <0x1001e000 0x1000>; 437 interrupts = <9>; 438 clocks = <&clks IMX27_CLK_SDHC3_IPG_GATE>, 439 <&clks IMX27_CLK_PER2_GATE>; 440 clock-names = "ipg", "per"; 441 dmas = <&dma 36>; 442 dma-names = "rx-tx"; 443 status = "disabled"; 444 }; 445 446 gpt6: timer@1001f000 { 447 compatible = "fsl,imx27-gpt", "fsl,imx21-gpt"; 448 reg = <0x1001f000 0x1000>; 449 interrupts = <2>; 450 clocks = <&clks IMX27_CLK_GPT6_IPG_GATE>, 451 <&clks IMX27_CLK_PER1_GATE>; 452 clock-names = "ipg", "per"; 453 }; 454 }; 455 456 aipi2: aipi@10020000 { /* AIPI2 */ 457 compatible = "fsl,aipi-bus", "simple-bus"; 458 #address-cells = <1>; 459 #size-cells = <1>; 460 reg = <0x10020000 0x20000>; 461 ranges; 462 463 fb: fb@10021000 { 464 compatible = "fsl,imx27-fb", "fsl,imx21-fb"; 465 interrupts = <61>; 466 reg = <0x10021000 0x1000>; 467 clocks = <&clks IMX27_CLK_LCDC_IPG_GATE>, 468 <&clks IMX27_CLK_LCDC_AHB_GATE>, 469 <&clks IMX27_CLK_PER3_GATE>; 470 clock-names = "ipg", "ahb", "per"; 471 status = "disabled"; 472 }; 473 474 coda: coda@10023000 { 475 compatible = "fsl,imx27-vpu", "cnm,codadx6"; 476 reg = <0x10023000 0x0200>; 477 interrupts = <53>; 478 clocks = <&clks IMX27_CLK_VPU_BAUD_GATE>, 479 <&clks IMX27_CLK_VPU_AHB_GATE>; 480 clock-names = "per", "ahb"; 481 iram = <&iram>; 482 }; 483 484 usbotg: usb@10024000 { 485 compatible = "fsl,imx27-usb"; 486 reg = <0x10024000 0x200>; 487 interrupts = <56>; 488 clocks = <&clks IMX27_CLK_USB_IPG_GATE>, 489 <&clks IMX27_CLK_USB_AHB_GATE>, 490 <&clks IMX27_CLK_USB_DIV>; 491 clock-names = "ipg", "ahb", "per"; 492 fsl,usbmisc = <&usbmisc 0>; 493 status = "disabled"; 494 }; 495 496 usbh1: usb@10024200 { 497 compatible = "fsl,imx27-usb"; 498 reg = <0x10024200 0x200>; 499 interrupts = <54>; 500 clocks = <&clks IMX27_CLK_USB_IPG_GATE>, 501 <&clks IMX27_CLK_USB_AHB_GATE>, 502 <&clks IMX27_CLK_USB_DIV>; 503 clock-names = "ipg", "ahb", "per"; 504 fsl,usbmisc = <&usbmisc 1>; 505 dr_mode = "host"; 506 status = "disabled"; 507 }; 508 509 usbh2: usb@10024400 { 510 compatible = "fsl,imx27-usb"; 511 reg = <0x10024400 0x200>; 512 interrupts = <55>; 513 clocks = <&clks IMX27_CLK_USB_IPG_GATE>, 514 <&clks IMX27_CLK_USB_AHB_GATE>, 515 <&clks IMX27_CLK_USB_DIV>; 516 clock-names = "ipg", "ahb", "per"; 517 fsl,usbmisc = <&usbmisc 2>; 518 dr_mode = "host"; 519 status = "disabled"; 520 }; 521 522 usbmisc: usbmisc@10024600 { 523 #index-cells = <1>; 524 compatible = "fsl,imx27-usbmisc"; 525 reg = <0x10024600 0x200>; 526 }; 527 528 sahara2: crypto@10025000 { 529 compatible = "fsl,imx27-sahara"; 530 reg = <0x10025000 0x1000>; 531 interrupts = <59>; 532 clocks = <&clks IMX27_CLK_SAHARA_IPG_GATE>, 533 <&clks IMX27_CLK_SAHARA_AHB_GATE>; 534 clock-names = "ipg", "ahb"; 535 }; 536 537 clks: ccm@10027000{ 538 compatible = "fsl,imx27-ccm"; 539 reg = <0x10027000 0x1000>; 540 #clock-cells = <1>; 541 }; 542 543 iim: efuse@10028000 { 544 compatible = "fsl,imx27-iim"; 545 reg = <0x10028000 0x1000>; 546 interrupts = <62>; 547 clocks = <&clks IMX27_CLK_IIM_IPG_GATE>; 548 }; 549 550 fec: ethernet@1002b000 { 551 compatible = "fsl,imx27-fec"; 552 reg = <0x1002b000 0x1000>; 553 interrupts = <50>; 554 clocks = <&clks IMX27_CLK_FEC_IPG_GATE>, 555 <&clks IMX27_CLK_FEC_AHB_GATE>; 556 clock-names = "ipg", "ahb"; 557 status = "disabled"; 558 }; 559 }; 560 561 nfc: nand-controller@d8000000 { 562 #address-cells = <1>; 563 #size-cells = <1>; 564 compatible = "fsl,imx27-nand"; 565 reg = <0xd8000000 0x1000>; 566 interrupts = <29>; 567 clocks = <&clks IMX27_CLK_NFC_BAUD_GATE>; 568 status = "disabled"; 569 }; 570 571 weim: weim@d8002000 { 572 #address-cells = <2>; 573 #size-cells = <1>; 574 compatible = "fsl,imx27-weim"; 575 reg = <0xd8002000 0x1000>; 576 clocks = <&clks IMX27_CLK_EMI_AHB_GATE>; 577 ranges = < 578 0 0 0xc0000000 0x08000000 579 1 0 0xc8000000 0x08000000 580 2 0 0xd0000000 0x02000000 581 3 0 0xd2000000 0x02000000 582 4 0 0xd4000000 0x02000000 583 5 0 0xd6000000 0x02000000 584 >; 585 status = "disabled"; 586 }; 587 588 iram: sram@ffff4c00 { 589 compatible = "mmio-sram"; 590 reg = <0xffff4c00 0xb400>; 591 }; 592 }; 593}; 594
