1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
4 */
5
6#include <dt-bindings/arm/coresight-cti-dt.h>
7#include <dt-bindings/clock/qcom,gcc-msm8916.h>
8#include <dt-bindings/clock/qcom,rpmcc.h>
9#include <dt-bindings/interconnect/qcom,msm8916.h>
10#include <dt-bindings/interrupt-controller/arm-gic.h>
11#include <dt-bindings/reset/qcom,gcc-msm8916.h>
12#include <dt-bindings/thermal/thermal.h>
13
14/ {
15	interrupt-parent = <&intc>;
16
17	#address-cells = <2>;
18	#size-cells = <2>;
19
20	aliases {
21		sdhc1 = &sdhc_1; /* SDC1 eMMC slot */
22		sdhc2 = &sdhc_2; /* SDC2 SD card slot */
23	};
24
25	chosen { };
26
27	memory {
28		device_type = "memory";
29		/* We expect the bootloader to fill in the reg */
30		reg = <0 0 0 0>;
31	};
32
33	reserved-memory {
34		#address-cells = <2>;
35		#size-cells = <2>;
36		ranges;
37
38		tz-apps@86000000 {
39			reg = <0x0 0x86000000 0x0 0x300000>;
40			no-map;
41		};
42
43		smem_mem: smem_region@86300000 {
44			reg = <0x0 0x86300000 0x0 0x100000>;
45			no-map;
46		};
47
48		hypervisor@86400000 {
49			reg = <0x0 0x86400000 0x0 0x100000>;
50			no-map;
51		};
52
53		tz@86500000 {
54			reg = <0x0 0x86500000 0x0 0x180000>;
55			no-map;
56		};
57
58		reserved@8668000 {
59			reg = <0x0 0x86680000 0x0 0x80000>;
60			no-map;
61		};
62
63		rmtfs@86700000 {
64			compatible = "qcom,rmtfs-mem";
65			reg = <0x0 0x86700000 0x0 0xe0000>;
66			no-map;
67
68			qcom,client-id = <1>;
69		};
70
71		rfsa@867e00000 {
72			reg = <0x0 0x867e0000 0x0 0x20000>;
73			no-map;
74		};
75
76		mpss_mem: mpss@86800000 {
77			reg = <0x0 0x86800000 0x0 0x2b00000>;
78			no-map;
79		};
80
81		wcnss_mem: wcnss@89300000 {
82			reg = <0x0 0x89300000 0x0 0x600000>;
83			no-map;
84		};
85
86		venus_mem: venus@89900000 {
87			reg = <0x0 0x89900000 0x0 0x600000>;
88			no-map;
89		};
90
91		mba_mem: mba@8ea00000 {
92			no-map;
93			reg = <0 0x8ea00000 0 0x100000>;
94		};
95	};
96
97	clocks {
98		xo_board: xo-board {
99			compatible = "fixed-clock";
100			#clock-cells = <0>;
101			clock-frequency = <19200000>;
102		};
103
104		sleep_clk: sleep-clk {
105			compatible = "fixed-clock";
106			#clock-cells = <0>;
107			clock-frequency = <32768>;
108		};
109	};
110
111	cpus {
112		#address-cells = <1>;
113		#size-cells = <0>;
114
115		CPU0: cpu@0 {
116			device_type = "cpu";
117			compatible = "arm,cortex-a53";
118			reg = <0x0>;
119			next-level-cache = <&L2_0>;
120			enable-method = "psci";
121			clocks = <&apcs>;
122			operating-points-v2 = <&cpu_opp_table>;
123			#cooling-cells = <2>;
124			power-domains = <&CPU_PD0>;
125			power-domain-names = "psci";
126		};
127
128		CPU1: cpu@1 {
129			device_type = "cpu";
130			compatible = "arm,cortex-a53";
131			reg = <0x1>;
132			next-level-cache = <&L2_0>;
133			enable-method = "psci";
134			clocks = <&apcs>;
135			operating-points-v2 = <&cpu_opp_table>;
136			#cooling-cells = <2>;
137			power-domains = <&CPU_PD1>;
138			power-domain-names = "psci";
139		};
140
141		CPU2: cpu@2 {
142			device_type = "cpu";
143			compatible = "arm,cortex-a53";
144			reg = <0x2>;
145			next-level-cache = <&L2_0>;
146			enable-method = "psci";
147			clocks = <&apcs>;
148			operating-points-v2 = <&cpu_opp_table>;
149			#cooling-cells = <2>;
150			power-domains = <&CPU_PD2>;
151			power-domain-names = "psci";
152		};
153
154		CPU3: cpu@3 {
155			device_type = "cpu";
156			compatible = "arm,cortex-a53";
157			reg = <0x3>;
158			next-level-cache = <&L2_0>;
159			enable-method = "psci";
160			clocks = <&apcs>;
161			operating-points-v2 = <&cpu_opp_table>;
162			#cooling-cells = <2>;
163			power-domains = <&CPU_PD3>;
164			power-domain-names = "psci";
165		};
166
167		L2_0: l2-cache {
168			compatible = "cache";
169			cache-level = <2>;
170		};
171
172		idle-states {
173			entry-method = "psci";
174
175			CPU_SLEEP_0: cpu-sleep-0 {
176				compatible = "arm,idle-state";
177				idle-state-name = "standalone-power-collapse";
178				arm,psci-suspend-param = <0x40000002>;
179				entry-latency-us = <130>;
180				exit-latency-us = <150>;
181				min-residency-us = <2000>;
182				local-timer-stop;
183			};
184		};
185
186		domain-idle-states {
187
188			CLUSTER_RET: cluster-retention {
189				compatible = "domain-idle-state";
190				arm,psci-suspend-param = <0x41000012>;
191				entry-latency-us = <500>;
192				exit-latency-us = <500>;
193				min-residency-us = <2000>;
194			};
195
196			CLUSTER_PWRDN: cluster-gdhs {
197				compatible = "domain-idle-state";
198				arm,psci-suspend-param = <0x41000032>;
199				entry-latency-us = <2000>;
200				exit-latency-us = <2000>;
201				min-residency-us = <6000>;
202			};
203		};
204	};
205
206	cpu_opp_table: cpu-opp-table {
207		compatible = "operating-points-v2";
208		opp-shared;
209
210		opp-200000000 {
211			opp-hz = /bits/ 64 <200000000>;
212		};
213		opp-400000000 {
214			opp-hz = /bits/ 64 <400000000>;
215		};
216		opp-800000000 {
217			opp-hz = /bits/ 64 <800000000>;
218		};
219		opp-998400000 {
220			opp-hz = /bits/ 64 <998400000>;
221		};
222	};
223
224	firmware {
225		scm: scm {
226			compatible = "qcom,scm-msm8916", "qcom,scm";
227			clocks = <&gcc GCC_CRYPTO_CLK>,
228				 <&gcc GCC_CRYPTO_AXI_CLK>,
229				 <&gcc GCC_CRYPTO_AHB_CLK>;
230			clock-names = "core", "bus", "iface";
231			#reset-cells = <1>;
232
233			qcom,dload-mode = <&tcsr 0x6100>;
234		};
235	};
236
237	pmu {
238		compatible = "arm,cortex-a53-pmu";
239		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
240	};
241
242	psci {
243		compatible = "arm,psci-1.0";
244		method = "smc";
245
246		CPU_PD0: power-domain-cpu0 {
247			#power-domain-cells = <0>;
248			power-domains = <&CLUSTER_PD>;
249			domain-idle-states = <&CPU_SLEEP_0>;
250		};
251
252		CPU_PD1: power-domain-cpu1 {
253			#power-domain-cells = <0>;
254			power-domains = <&CLUSTER_PD>;
255			domain-idle-states = <&CPU_SLEEP_0>;
256		};
257
258		CPU_PD2: power-domain-cpu2 {
259			#power-domain-cells = <0>;
260			power-domains = <&CLUSTER_PD>;
261			domain-idle-states = <&CPU_SLEEP_0>;
262		};
263
264		CPU_PD3: power-domain-cpu3 {
265			#power-domain-cells = <0>;
266			power-domains = <&CLUSTER_PD>;
267			domain-idle-states = <&CPU_SLEEP_0>;
268		};
269
270		CLUSTER_PD: power-domain-cluster {
271			#power-domain-cells = <0>;
272			domain-idle-states = <&CLUSTER_RET>, <&CLUSTER_PWRDN>;
273		};
274	};
275
276	smd {
277		compatible = "qcom,smd";
278
279		rpm {
280			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
281			qcom,ipc = <&apcs 8 0>;
282			qcom,smd-edge = <15>;
283
284			rpm_requests: rpm-requests {
285				compatible = "qcom,rpm-msm8916";
286				qcom,smd-channels = "rpm_requests";
287
288				rpmcc: clock-controller {
289					compatible = "qcom,rpmcc-msm8916";
290					#clock-cells = <1>;
291				};
292			};
293		};
294	};
295
296	smem {
297		compatible = "qcom,smem";
298
299		memory-region = <&smem_mem>;
300		qcom,rpm-msg-ram = <&rpm_msg_ram>;
301
302		hwlocks = <&tcsr_mutex 3>;
303	};
304
305	smp2p-hexagon {
306		compatible = "qcom,smp2p";
307		qcom,smem = <435>, <428>;
308
309		interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
310
311		qcom,ipc = <&apcs 8 14>;
312
313		qcom,local-pid = <0>;
314		qcom,remote-pid = <1>;
315
316		hexagon_smp2p_out: master-kernel {
317			qcom,entry-name = "master-kernel";
318
319			#qcom,smem-state-cells = <1>;
320		};
321
322		hexagon_smp2p_in: slave-kernel {
323			qcom,entry-name = "slave-kernel";
324
325			interrupt-controller;
326			#interrupt-cells = <2>;
327		};
328	};
329
330	smp2p-wcnss {
331		compatible = "qcom,smp2p";
332		qcom,smem = <451>, <431>;
333
334		interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
335
336		qcom,ipc = <&apcs 8 18>;
337
338		qcom,local-pid = <0>;
339		qcom,remote-pid = <4>;
340
341		wcnss_smp2p_out: master-kernel {
342			qcom,entry-name = "master-kernel";
343
344			#qcom,smem-state-cells = <1>;
345		};
346
347		wcnss_smp2p_in: slave-kernel {
348			qcom,entry-name = "slave-kernel";
349
350			interrupt-controller;
351			#interrupt-cells = <2>;
352		};
353	};
354
355	smsm {
356		compatible = "qcom,smsm";
357
358		#address-cells = <1>;
359		#size-cells = <0>;
360
361		qcom,ipc-1 = <&apcs 8 13>;
362		qcom,ipc-3 = <&apcs 8 19>;
363
364		apps_smsm: apps@0 {
365			reg = <0>;
366
367			#qcom,smem-state-cells = <1>;
368		};
369
370		hexagon_smsm: hexagon@1 {
371			reg = <1>;
372			interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
373
374			interrupt-controller;
375			#interrupt-cells = <2>;
376		};
377
378		wcnss_smsm: wcnss@6 {
379			reg = <6>;
380			interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
381
382			interrupt-controller;
383			#interrupt-cells = <2>;
384		};
385	};
386
387	soc: soc {
388		#address-cells = <1>;
389		#size-cells = <1>;
390		ranges = <0 0 0 0xffffffff>;
391		compatible = "simple-bus";
392
393		rng@22000 {
394			compatible = "qcom,prng";
395			reg = <0x00022000 0x200>;
396			clocks = <&gcc GCC_PRNG_AHB_CLK>;
397			clock-names = "core";
398		};
399
400		restart@4ab000 {
401			compatible = "qcom,pshold";
402			reg = <0x004ab000 0x4>;
403		};
404
405		qfprom: qfprom@5c000 {
406			compatible = "qcom,qfprom";
407			reg = <0x0005c000 0x1000>;
408			#address-cells = <1>;
409			#size-cells = <1>;
410			tsens_caldata: caldata@d0 {
411				reg = <0xd0 0x8>;
412			};
413			tsens_calsel: calsel@ec {
414				reg = <0xec 0x4>;
415			};
416		};
417
418		rpm_msg_ram: memory@60000 {
419			compatible = "qcom,rpm-msg-ram";
420			reg = <0x00060000 0x8000>;
421		};
422
423		bimc: interconnect@400000 {
424			compatible = "qcom,msm8916-bimc";
425			reg = <0x00400000 0x62000>;
426			#interconnect-cells = <1>;
427			clock-names = "bus", "bus_a";
428			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
429				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
430		};
431
432		tsens: thermal-sensor@4a9000 {
433			compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1";
434			reg = <0x004a9000 0x1000>, /* TM */
435			      <0x004a8000 0x1000>; /* SROT */
436			nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
437			nvmem-cell-names = "calib", "calib_sel";
438			#qcom,sensors = <5>;
439			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
440			interrupt-names = "uplow";
441			#thermal-sensor-cells = <1>;
442		};
443
444		pcnoc: interconnect@500000 {
445			compatible = "qcom,msm8916-pcnoc";
446			reg = <0x00500000 0x11000>;
447			#interconnect-cells = <1>;
448			clock-names = "bus", "bus_a";
449			clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
450				 <&rpmcc RPM_SMD_PCNOC_A_CLK>;
451		};
452
453		snoc: interconnect@580000 {
454			compatible = "qcom,msm8916-snoc";
455			reg = <0x00580000 0x14000>;
456			#interconnect-cells = <1>;
457			clock-names = "bus", "bus_a";
458			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
459				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
460		};
461
462		/* System CTIs */
463		/* CTI 0 - TMC connections */
464		cti0: cti@810000 {
465			compatible = "arm,coresight-cti", "arm,primecell";
466			reg = <0x00810000 0x1000>;
467
468			clocks = <&rpmcc RPM_QDSS_CLK>;
469			clock-names = "apb_pclk";
470
471			status = "disabled";
472		};
473
474		/* CTI 1 - TPIU connections */
475		cti1: cti@811000 {
476			compatible = "arm,coresight-cti", "arm,primecell";
477			reg = <0x00811000 0x1000>;
478
479			clocks = <&rpmcc RPM_QDSS_CLK>;
480			clock-names = "apb_pclk";
481
482			status = "disabled";
483		};
484
485		/* CTIs 2-11 - no information - not instantiated */
486
487		tpiu: tpiu@820000 {
488			compatible = "arm,coresight-tpiu", "arm,primecell";
489			reg = <0x00820000 0x1000>;
490
491			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
492			clock-names = "apb_pclk", "atclk";
493
494			status = "disabled";
495
496			in-ports {
497				port {
498					tpiu_in: endpoint {
499						remote-endpoint = <&replicator_out1>;
500					};
501				};
502			};
503		};
504
505		funnel0: funnel@821000 {
506			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
507			reg = <0x00821000 0x1000>;
508
509			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
510			clock-names = "apb_pclk", "atclk";
511
512			status = "disabled";
513
514			in-ports {
515				#address-cells = <1>;
516				#size-cells = <0>;
517
518				/*
519				 * Not described input ports:
520				 * 0 - connected to Resource and Power Manger CPU ETM
521				 * 1 - not-connected
522				 * 2 - connected to Modem CPU ETM
523				 * 3 - not-connected
524				 * 5 - not-connected
525				 * 6 - connected trought funnel to Wireless CPU ETM
526				 * 7 - connected to STM component
527				 */
528
529				port@4 {
530					reg = <4>;
531					funnel0_in4: endpoint {
532						remote-endpoint = <&funnel1_out>;
533					};
534				};
535			};
536
537			out-ports {
538				port {
539					funnel0_out: endpoint {
540						remote-endpoint = <&etf_in>;
541					};
542				};
543			};
544		};
545
546		replicator: replicator@824000 {
547			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
548			reg = <0x00824000 0x1000>;
549
550			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
551			clock-names = "apb_pclk", "atclk";
552
553			status = "disabled";
554
555			out-ports {
556				#address-cells = <1>;
557				#size-cells = <0>;
558
559				port@0 {
560					reg = <0>;
561					replicator_out0: endpoint {
562						remote-endpoint = <&etr_in>;
563					};
564				};
565				port@1 {
566					reg = <1>;
567					replicator_out1: endpoint {
568						remote-endpoint = <&tpiu_in>;
569					};
570				};
571			};
572
573			in-ports {
574				port {
575					replicator_in: endpoint {
576						remote-endpoint = <&etf_out>;
577					};
578				};
579			};
580		};
581
582		etf: etf@825000 {
583			compatible = "arm,coresight-tmc", "arm,primecell";
584			reg = <0x00825000 0x1000>;
585
586			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
587			clock-names = "apb_pclk", "atclk";
588
589			status = "disabled";
590
591			in-ports {
592				port {
593					etf_in: endpoint {
594						remote-endpoint = <&funnel0_out>;
595					};
596				};
597			};
598
599			out-ports {
600				port {
601					etf_out: endpoint {
602						remote-endpoint = <&replicator_in>;
603					};
604				};
605			};
606		};
607
608		etr: etr@826000 {
609			compatible = "arm,coresight-tmc", "arm,primecell";
610			reg = <0x00826000 0x1000>;
611
612			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
613			clock-names = "apb_pclk", "atclk";
614
615			status = "disabled";
616
617			in-ports {
618				port {
619					etr_in: endpoint {
620						remote-endpoint = <&replicator_out0>;
621					};
622				};
623			};
624		};
625
626		funnel1: funnel@841000 {	/* APSS funnel only 4 inputs are used */
627			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
628			reg = <0x00841000 0x1000>;
629
630			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
631			clock-names = "apb_pclk", "atclk";
632
633			status = "disabled";
634
635			in-ports {
636				#address-cells = <1>;
637				#size-cells = <0>;
638
639				port@0 {
640					reg = <0>;
641					funnel1_in0: endpoint {
642						remote-endpoint = <&etm0_out>;
643					};
644				};
645				port@1 {
646					reg = <1>;
647					funnel1_in1: endpoint {
648						remote-endpoint = <&etm1_out>;
649					};
650				};
651				port@2 {
652					reg = <2>;
653					funnel1_in2: endpoint {
654						remote-endpoint = <&etm2_out>;
655					};
656				};
657				port@3 {
658					reg = <3>;
659					funnel1_in3: endpoint {
660						remote-endpoint = <&etm3_out>;
661					};
662				};
663			};
664
665			out-ports {
666				port {
667					funnel1_out: endpoint {
668						remote-endpoint = <&funnel0_in4>;
669					};
670				};
671			};
672		};
673
674		debug0: debug@850000 {
675			compatible = "arm,coresight-cpu-debug", "arm,primecell";
676			reg = <0x00850000 0x1000>;
677			clocks = <&rpmcc RPM_QDSS_CLK>;
678			clock-names = "apb_pclk";
679			cpu = <&CPU0>;
680			status = "disabled";
681		};
682
683		debug1: debug@852000 {
684			compatible = "arm,coresight-cpu-debug", "arm,primecell";
685			reg = <0x00852000 0x1000>;
686			clocks = <&rpmcc RPM_QDSS_CLK>;
687			clock-names = "apb_pclk";
688			cpu = <&CPU1>;
689			status = "disabled";
690		};
691
692		debug2: debug@854000 {
693			compatible = "arm,coresight-cpu-debug", "arm,primecell";
694			reg = <0x00854000 0x1000>;
695			clocks = <&rpmcc RPM_QDSS_CLK>;
696			clock-names = "apb_pclk";
697			cpu = <&CPU2>;
698			status = "disabled";
699		};
700
701		debug3: debug@856000 {
702			compatible = "arm,coresight-cpu-debug", "arm,primecell";
703			reg = <0x00856000 0x1000>;
704			clocks = <&rpmcc RPM_QDSS_CLK>;
705			clock-names = "apb_pclk";
706			cpu = <&CPU3>;
707			status = "disabled";
708		};
709
710		/* Core CTIs; CTIs 12-15 */
711		/* CTI - CPU-0 */
712		cti12: cti@858000 {
713			compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
714				     "arm,primecell";
715			reg = <0x00858000 0x1000>;
716
717			clocks = <&rpmcc RPM_QDSS_CLK>;
718			clock-names = "apb_pclk";
719
720			cpu = <&CPU0>;
721			arm,cs-dev-assoc = <&etm0>;
722
723			status = "disabled";
724		};
725
726		/* CTI - CPU-1 */
727		cti13: cti@859000 {
728			compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
729				     "arm,primecell";
730			reg = <0x00859000 0x1000>;
731
732			clocks = <&rpmcc RPM_QDSS_CLK>;
733			clock-names = "apb_pclk";
734
735			cpu = <&CPU1>;
736			arm,cs-dev-assoc = <&etm1>;
737
738			status = "disabled";
739		};
740
741		/* CTI - CPU-2 */
742		cti14: cti@85a000 {
743			compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
744				     "arm,primecell";
745			reg = <0x0085a000 0x1000>;
746
747			clocks = <&rpmcc RPM_QDSS_CLK>;
748			clock-names = "apb_pclk";
749
750			cpu = <&CPU2>;
751			arm,cs-dev-assoc = <&etm2>;
752
753			status = "disabled";
754		};
755
756		/* CTI - CPU-3 */
757		cti15: cti@85b000 {
758			compatible = "arm,coresight-cti-v8-arch", "arm,coresight-cti",
759				     "arm,primecell";
760			reg = <0x0085b000 0x1000>;
761
762			clocks = <&rpmcc RPM_QDSS_CLK>;
763			clock-names = "apb_pclk";
764
765			cpu = <&CPU3>;
766			arm,cs-dev-assoc = <&etm3>;
767
768			status = "disabled";
769		};
770
771		etm0: etm@85c000 {
772			compatible = "arm,coresight-etm4x", "arm,primecell";
773			reg = <0x0085c000 0x1000>;
774
775			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
776			clock-names = "apb_pclk", "atclk";
777			arm,coresight-loses-context-with-cpu;
778
779			cpu = <&CPU0>;
780
781			status = "disabled";
782
783			out-ports {
784				port {
785					etm0_out: endpoint {
786						remote-endpoint = <&funnel1_in0>;
787					};
788				};
789			};
790		};
791
792		etm1: etm@85d000 {
793			compatible = "arm,coresight-etm4x", "arm,primecell";
794			reg = <0x0085d000 0x1000>;
795
796			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
797			clock-names = "apb_pclk", "atclk";
798			arm,coresight-loses-context-with-cpu;
799
800			cpu = <&CPU1>;
801
802			status = "disabled";
803
804			out-ports {
805				port {
806					etm1_out: endpoint {
807						remote-endpoint = <&funnel1_in1>;
808					};
809				};
810			};
811		};
812
813		etm2: etm@85e000 {
814			compatible = "arm,coresight-etm4x", "arm,primecell";
815			reg = <0x0085e000 0x1000>;
816
817			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
818			clock-names = "apb_pclk", "atclk";
819			arm,coresight-loses-context-with-cpu;
820
821			cpu = <&CPU2>;
822
823			status = "disabled";
824
825			out-ports {
826				port {
827					etm2_out: endpoint {
828						remote-endpoint = <&funnel1_in2>;
829					};
830				};
831			};
832		};
833
834		etm3: etm@85f000 {
835			compatible = "arm,coresight-etm4x", "arm,primecell";
836			reg = <0x0085f000 0x1000>;
837
838			clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
839			clock-names = "apb_pclk", "atclk";
840			arm,coresight-loses-context-with-cpu;
841
842			cpu = <&CPU3>;
843
844			status = "disabled";
845
846			out-ports {
847				port {
848					etm3_out: endpoint {
849						remote-endpoint = <&funnel1_in3>;
850					};
851				};
852			};
853		};
854
855		msmgpio: pinctrl@1000000 {
856			compatible = "qcom,msm8916-pinctrl";
857			reg = <0x01000000 0x300000>;
858			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
859			gpio-controller;
860			gpio-ranges = <&msmgpio 0 0 122>;
861			#gpio-cells = <2>;
862			interrupt-controller;
863			#interrupt-cells = <2>;
864		};
865
866		gcc: clock-controller@1800000 {
867			compatible = "qcom,gcc-msm8916";
868			#clock-cells = <1>;
869			#reset-cells = <1>;
870			#power-domain-cells = <1>;
871			reg = <0x01800000 0x80000>;
872		};
873
874		tcsr_mutex: hwlock@1905000 {
875			compatible = "qcom,tcsr-mutex";
876			reg = <0x01905000 0x20000>;
877			#hwlock-cells = <1>;
878		};
879
880		tcsr: syscon@1937000 {
881			compatible = "qcom,tcsr-msm8916", "syscon";
882			reg = <0x01937000 0x30000>;
883		};
884
885		mdss: mdss@1a00000 {
886			compatible = "qcom,mdss";
887			reg = <0x01a00000 0x1000>,
888			      <0x01ac8000 0x3000>;
889			reg-names = "mdss_phys", "vbif_phys";
890
891			power-domains = <&gcc MDSS_GDSC>;
892
893			clocks = <&gcc GCC_MDSS_AHB_CLK>,
894				 <&gcc GCC_MDSS_AXI_CLK>,
895				 <&gcc GCC_MDSS_VSYNC_CLK>;
896			clock-names = "iface",
897				      "bus",
898				      "vsync";
899
900			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
901
902			interrupt-controller;
903			#interrupt-cells = <1>;
904
905			#address-cells = <1>;
906			#size-cells = <1>;
907			ranges;
908
909			mdp: mdp@1a01000 {
910				compatible = "qcom,mdp5";
911				reg = <0x01a01000 0x89000>;
912				reg-names = "mdp_phys";
913
914				interrupt-parent = <&mdss>;
915				interrupts = <0>;
916
917				clocks = <&gcc GCC_MDSS_AHB_CLK>,
918					 <&gcc GCC_MDSS_AXI_CLK>,
919					 <&gcc GCC_MDSS_MDP_CLK>,
920					 <&gcc GCC_MDSS_VSYNC_CLK>;
921				clock-names = "iface",
922					      "bus",
923					      "core",
924					      "vsync";
925
926				iommus = <&apps_iommu 4>;
927
928				ports {
929					#address-cells = <1>;
930					#size-cells = <0>;
931
932					port@0 {
933						reg = <0>;
934						mdp5_intf1_out: endpoint {
935							remote-endpoint = <&dsi0_in>;
936						};
937					};
938				};
939			};
940
941			dsi0: dsi@1a98000 {
942				compatible = "qcom,mdss-dsi-ctrl";
943				reg = <0x01a98000 0x25c>;
944				reg-names = "dsi_ctrl";
945
946				interrupt-parent = <&mdss>;
947				interrupts = <4>;
948
949				assigned-clocks = <&gcc BYTE0_CLK_SRC>,
950						  <&gcc PCLK0_CLK_SRC>;
951				assigned-clock-parents = <&dsi_phy0 0>,
952							 <&dsi_phy0 1>;
953
954				clocks = <&gcc GCC_MDSS_MDP_CLK>,
955					 <&gcc GCC_MDSS_AHB_CLK>,
956					 <&gcc GCC_MDSS_AXI_CLK>,
957					 <&gcc GCC_MDSS_BYTE0_CLK>,
958					 <&gcc GCC_MDSS_PCLK0_CLK>,
959					 <&gcc GCC_MDSS_ESC0_CLK>;
960				clock-names = "mdp_core",
961					      "iface",
962					      "bus",
963					      "byte",
964					      "pixel",
965					      "core";
966				phys = <&dsi_phy0>;
967				phy-names = "dsi-phy";
968
969				#address-cells = <1>;
970				#size-cells = <0>;
971
972				ports {
973					#address-cells = <1>;
974					#size-cells = <0>;
975
976					port@0 {
977						reg = <0>;
978						dsi0_in: endpoint {
979							remote-endpoint = <&mdp5_intf1_out>;
980						};
981					};
982
983					port@1 {
984						reg = <1>;
985						dsi0_out: endpoint {
986						};
987					};
988				};
989			};
990
991			dsi_phy0: dsi-phy@1a98300 {
992				compatible = "qcom,dsi-phy-28nm-lp";
993				reg = <0x01a98300 0xd4>,
994				      <0x01a98500 0x280>,
995				      <0x01a98780 0x30>;
996				reg-names = "dsi_pll",
997					    "dsi_phy",
998					    "dsi_phy_regulator";
999
1000				#clock-cells = <1>;
1001				#phy-cells = <0>;
1002
1003				clocks = <&gcc GCC_MDSS_AHB_CLK>,
1004					 <&xo_board>;
1005				clock-names = "iface", "ref";
1006			};
1007		};
1008
1009		camss: camss@1b00000 {
1010			compatible = "qcom,msm8916-camss";
1011			reg = <0x01b0ac00 0x200>,
1012				<0x01b00030 0x4>,
1013				<0x01b0b000 0x200>,
1014				<0x01b00038 0x4>,
1015				<0x01b08000 0x100>,
1016				<0x01b08400 0x100>,
1017				<0x01b0a000 0x500>,
1018				<0x01b00020 0x10>,
1019				<0x01b10000 0x1000>;
1020			reg-names = "csiphy0",
1021				"csiphy0_clk_mux",
1022				"csiphy1",
1023				"csiphy1_clk_mux",
1024				"csid0",
1025				"csid1",
1026				"ispif",
1027				"csi_clk_mux",
1028				"vfe0";
1029			interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
1030				<GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
1031				<GIC_SPI 51 IRQ_TYPE_EDGE_RISING>,
1032				<GIC_SPI 52 IRQ_TYPE_EDGE_RISING>,
1033				<GIC_SPI 55 IRQ_TYPE_EDGE_RISING>,
1034				<GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
1035			interrupt-names = "csiphy0",
1036				"csiphy1",
1037				"csid0",
1038				"csid1",
1039				"ispif",
1040				"vfe0";
1041			power-domains = <&gcc VFE_GDSC>;
1042			clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
1043				<&gcc GCC_CAMSS_ISPIF_AHB_CLK>,
1044				<&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>,
1045				<&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>,
1046				<&gcc GCC_CAMSS_CSI0_AHB_CLK>,
1047				<&gcc GCC_CAMSS_CSI0_CLK>,
1048				<&gcc GCC_CAMSS_CSI0PHY_CLK>,
1049				<&gcc GCC_CAMSS_CSI0PIX_CLK>,
1050				<&gcc GCC_CAMSS_CSI0RDI_CLK>,
1051				<&gcc GCC_CAMSS_CSI1_AHB_CLK>,
1052				<&gcc GCC_CAMSS_CSI1_CLK>,
1053				<&gcc GCC_CAMSS_CSI1PHY_CLK>,
1054				<&gcc GCC_CAMSS_CSI1PIX_CLK>,
1055				<&gcc GCC_CAMSS_CSI1RDI_CLK>,
1056				<&gcc GCC_CAMSS_AHB_CLK>,
1057				<&gcc GCC_CAMSS_VFE0_CLK>,
1058				<&gcc GCC_CAMSS_CSI_VFE0_CLK>,
1059				<&gcc GCC_CAMSS_VFE_AHB_CLK>,
1060				<&gcc GCC_CAMSS_VFE_AXI_CLK>;
1061			clock-names = "top_ahb",
1062				"ispif_ahb",
1063				"csiphy0_timer",
1064				"csiphy1_timer",
1065				"csi0_ahb",
1066				"csi0",
1067				"csi0_phy",
1068				"csi0_pix",
1069				"csi0_rdi",
1070				"csi1_ahb",
1071				"csi1",
1072				"csi1_phy",
1073				"csi1_pix",
1074				"csi1_rdi",
1075				"ahb",
1076				"vfe0",
1077				"csi_vfe0",
1078				"vfe_ahb",
1079				"vfe_axi";
1080			iommus = <&apps_iommu 3>;
1081			status = "disabled";
1082			ports {
1083				#address-cells = <1>;
1084				#size-cells = <0>;
1085			};
1086		};
1087
1088		cci: cci@1b0c000 {
1089			compatible = "qcom,msm8916-cci";
1090			#address-cells = <1>;
1091			#size-cells = <0>;
1092			reg = <0x01b0c000 0x1000>;
1093			interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
1094			clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>,
1095				<&gcc GCC_CAMSS_CCI_AHB_CLK>,
1096				<&gcc GCC_CAMSS_CCI_CLK>,
1097				<&gcc GCC_CAMSS_AHB_CLK>;
1098			clock-names = "camss_top_ahb", "cci_ahb",
1099					  "cci", "camss_ahb";
1100			assigned-clocks = <&gcc GCC_CAMSS_CCI_AHB_CLK>,
1101					  <&gcc GCC_CAMSS_CCI_CLK>;
1102			assigned-clock-rates = <80000000>, <19200000>;
1103			pinctrl-names = "default";
1104			pinctrl-0 = <&cci0_default>;
1105			status = "disabled";
1106
1107			cci_i2c0: i2c-bus@0 {
1108				reg = <0>;
1109				clock-frequency = <400000>;
1110				#address-cells = <1>;
1111				#size-cells = <0>;
1112			};
1113		};
1114
1115		gpu@1c00000 {
1116			compatible = "qcom,adreno-306.0", "qcom,adreno";
1117			reg = <0x01c00000 0x20000>;
1118			reg-names = "kgsl_3d0_reg_memory";
1119			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
1120			interrupt-names = "kgsl_3d0_irq";
1121			clock-names =
1122			    "core",
1123			    "iface",
1124			    "mem",
1125			    "mem_iface",
1126			    "alt_mem_iface",
1127			    "gfx3d";
1128			clocks =
1129			    <&gcc GCC_OXILI_GFX3D_CLK>,
1130			    <&gcc GCC_OXILI_AHB_CLK>,
1131			    <&gcc GCC_OXILI_GMEM_CLK>,
1132			    <&gcc GCC_BIMC_GFX_CLK>,
1133			    <&gcc GCC_BIMC_GPU_CLK>,
1134			    <&gcc GFX3D_CLK_SRC>;
1135			power-domains = <&gcc OXILI_GDSC>;
1136			operating-points-v2 = <&gpu_opp_table>;
1137			iommus = <&gpu_iommu 1>, <&gpu_iommu 2>;
1138
1139			gpu_opp_table: opp-table {
1140				compatible = "operating-points-v2";
1141
1142				opp-400000000 {
1143					opp-hz = /bits/ 64 <400000000>;
1144				};
1145				opp-19200000 {
1146					opp-hz = /bits/ 64 <19200000>;
1147				};
1148			};
1149		};
1150
1151		venus: video-codec@1d00000 {
1152			compatible = "qcom,msm8916-venus";
1153			reg = <0x01d00000 0xff000>;
1154			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
1155			power-domains = <&gcc VENUS_GDSC>;
1156			clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>,
1157				 <&gcc GCC_VENUS0_AHB_CLK>,
1158				 <&gcc GCC_VENUS0_AXI_CLK>;
1159			clock-names = "core", "iface", "bus";
1160			iommus = <&apps_iommu 5>;
1161			memory-region = <&venus_mem>;
1162			status = "okay";
1163
1164			video-decoder {
1165				compatible = "venus-decoder";
1166			};
1167
1168			video-encoder {
1169				compatible = "venus-encoder";
1170			};
1171		};
1172
1173		apps_iommu: iommu@1ef0000 {
1174			#address-cells = <1>;
1175			#size-cells = <1>;
1176			#iommu-cells = <1>;
1177			compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
1178			ranges = <0 0x01e20000 0x40000>;
1179			reg = <0x01ef0000 0x3000>;
1180			clocks = <&gcc GCC_SMMU_CFG_CLK>,
1181				 <&gcc GCC_APSS_TCU_CLK>;
1182			clock-names = "iface", "bus";
1183			qcom,iommu-secure-id = <17>;
1184
1185			// vfe:
1186			iommu-ctx@3000 {
1187				compatible = "qcom,msm-iommu-v1-sec";
1188				reg = <0x3000 0x1000>;
1189				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
1190			};
1191
1192			// mdp_0:
1193			iommu-ctx@4000 {
1194				compatible = "qcom,msm-iommu-v1-ns";
1195				reg = <0x4000 0x1000>;
1196				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
1197			};
1198
1199			// venus_ns:
1200			iommu-ctx@5000 {
1201				compatible = "qcom,msm-iommu-v1-sec";
1202				reg = <0x5000 0x1000>;
1203				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
1204			};
1205		};
1206
1207		gpu_iommu: iommu@1f08000 {
1208			#address-cells = <1>;
1209			#size-cells = <1>;
1210			#iommu-cells = <1>;
1211			compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
1212			ranges = <0 0x01f08000 0x10000>;
1213			clocks = <&gcc GCC_SMMU_CFG_CLK>,
1214				 <&gcc GCC_GFX_TCU_CLK>;
1215			clock-names = "iface", "bus";
1216			qcom,iommu-secure-id = <18>;
1217
1218			// gfx3d_user:
1219			iommu-ctx@1000 {
1220				compatible = "qcom,msm-iommu-v1-ns";
1221				reg = <0x1000 0x1000>;
1222				interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
1223			};
1224
1225			// gfx3d_priv:
1226			iommu-ctx@2000 {
1227				compatible = "qcom,msm-iommu-v1-ns";
1228				reg = <0x2000 0x1000>;
1229				interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
1230			};
1231		};
1232
1233		spmi_bus: spmi@200f000 {
1234			compatible = "qcom,spmi-pmic-arb";
1235			reg = <0x0200f000 0x001000>,
1236			      <0x02400000 0x400000>,
1237			      <0x02c00000 0x400000>,
1238			      <0x03800000 0x200000>,
1239			      <0x0200a000 0x002100>;
1240			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
1241			interrupt-names = "periph_irq";
1242			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
1243			qcom,ee = <0>;
1244			qcom,channel = <0>;
1245			#address-cells = <2>;
1246			#size-cells = <0>;
1247			interrupt-controller;
1248			#interrupt-cells = <4>;
1249		};
1250
1251		mpss: remoteproc@4080000 {
1252			compatible = "qcom,msm8916-mss-pil", "qcom,q6v5-pil";
1253			reg = <0x04080000 0x100>,
1254			      <0x04020000 0x040>;
1255
1256			reg-names = "qdsp6", "rmb";
1257
1258			interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
1259					      <&hexagon_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
1260					      <&hexagon_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
1261					      <&hexagon_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
1262					      <&hexagon_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
1263			interrupt-names = "wdog", "fatal", "ready",
1264					  "handover", "stop-ack";
1265
1266			clocks = <&gcc GCC_MSS_CFG_AHB_CLK>,
1267				 <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
1268				 <&gcc GCC_BOOT_ROM_AHB_CLK>,
1269				 <&xo_board>;
1270			clock-names = "iface", "bus", "mem", "xo";
1271
1272			qcom,smem-states = <&hexagon_smp2p_out 0>;
1273			qcom,smem-state-names = "stop";
1274
1275			resets = <&scm 0>;
1276			reset-names = "mss_restart";
1277
1278			qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>;
1279
1280			status = "disabled";
1281
1282			mba {
1283				memory-region = <&mba_mem>;
1284			};
1285
1286			mpss {
1287				memory-region = <&mpss_mem>;
1288			};
1289
1290			smd-edge {
1291				interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
1292
1293				qcom,smd-edge = <0>;
1294				qcom,ipc = <&apcs 8 12>;
1295				qcom,remote-pid = <1>;
1296
1297				label = "hexagon";
1298
1299				fastrpc {
1300					compatible = "qcom,fastrpc";
1301					qcom,smd-channels = "fastrpcsmd-apps-dsp";
1302					label = "adsp";
1303
1304					#address-cells = <1>;
1305					#size-cells = <0>;
1306
1307					cb@1 {
1308						compatible = "qcom,fastrpc-compute-cb";
1309						reg = <1>;
1310					};
1311				};
1312			};
1313		};
1314
1315		sound: sound@7702000 {
1316			status = "disabled";
1317			compatible = "qcom,apq8016-sbc-sndcard";
1318			reg = <0x07702000 0x4>, <0x07702004 0x4>;
1319			reg-names = "mic-iomux", "spkr-iomux";
1320		};
1321
1322		lpass: audio-controller@7708000 {
1323			status = "disabled";
1324			compatible = "qcom,lpass-cpu-apq8016";
1325			clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
1326				 <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>,
1327				 <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>,
1328				 <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>,
1329				 <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>,
1330				 <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>,
1331				 <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>;
1332
1333			clock-names = "ahbix-clk",
1334					"pcnoc-mport-clk",
1335					"pcnoc-sway-clk",
1336					"mi2s-bit-clk0",
1337					"mi2s-bit-clk1",
1338					"mi2s-bit-clk2",
1339					"mi2s-bit-clk3";
1340			#sound-dai-cells = <1>;
1341
1342			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
1343			interrupt-names = "lpass-irq-lpaif";
1344			reg = <0x07708000 0x10000>;
1345			reg-names = "lpass-lpaif";
1346
1347			#address-cells = <1>;
1348			#size-cells = <0>;
1349		};
1350
1351		lpass_codec: audio-codec@771c000 {
1352			compatible = "qcom,msm8916-wcd-digital-codec";
1353			reg = <0x0771c000 0x400>;
1354			clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
1355				 <&gcc GCC_CODEC_DIGCODEC_CLK>;
1356			clock-names = "ahbix-clk", "mclk";
1357			#sound-dai-cells = <1>;
1358		};
1359
1360		sdhc_1: sdhci@7824000 {
1361			compatible = "qcom,sdhci-msm-v4";
1362			reg = <0x07824900 0x11c>, <0x07824000 0x800>;
1363			reg-names = "hc_mem", "core_mem";
1364
1365			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
1366				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
1367			interrupt-names = "hc_irq", "pwr_irq";
1368			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
1369				 <&gcc GCC_SDCC1_AHB_CLK>,
1370				 <&xo_board>;
1371			clock-names = "core", "iface", "xo";
1372			mmc-ddr-1_8v;
1373			bus-width = <8>;
1374			non-removable;
1375			status = "disabled";
1376		};
1377
1378		sdhc_2: sdhci@7864000 {
1379			compatible = "qcom,sdhci-msm-v4";
1380			reg = <0x07864900 0x11c>, <0x07864000 0x800>;
1381			reg-names = "hc_mem", "core_mem";
1382
1383			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
1384				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
1385			interrupt-names = "hc_irq", "pwr_irq";
1386			clocks = <&gcc GCC_SDCC2_APPS_CLK>,
1387				 <&gcc GCC_SDCC2_AHB_CLK>,
1388				 <&xo_board>;
1389			clock-names = "core", "iface", "xo";
1390			bus-width = <4>;
1391			status = "disabled";
1392		};
1393
1394		blsp_dma: dma@7884000 {
1395			compatible = "qcom,bam-v1.7.0";
1396			reg = <0x07884000 0x23000>;
1397			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
1398			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
1399			clock-names = "bam_clk";
1400			#dma-cells = <1>;
1401			qcom,ee = <0>;
1402			status = "disabled";
1403		};
1404
1405		blsp1_uart1: serial@78af000 {
1406			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
1407			reg = <0x078af000 0x200>;
1408			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
1409			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
1410			clock-names = "core", "iface";
1411			dmas = <&blsp_dma 1>, <&blsp_dma 0>;
1412			dma-names = "rx", "tx";
1413			pinctrl-names = "default", "sleep";
1414			pinctrl-0 = <&blsp1_uart1_default>;
1415			pinctrl-1 = <&blsp1_uart1_sleep>;
1416			status = "disabled";
1417		};
1418
1419		blsp1_uart2: serial@78b0000 {
1420			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
1421			reg = <0x078b0000 0x200>;
1422			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
1423			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
1424			clock-names = "core", "iface";
1425			dmas = <&blsp_dma 3>, <&blsp_dma 2>;
1426			dma-names = "rx", "tx";
1427			pinctrl-names = "default", "sleep";
1428			pinctrl-0 = <&blsp1_uart2_default>;
1429			pinctrl-1 = <&blsp1_uart2_sleep>;
1430			status = "disabled";
1431		};
1432
1433		blsp_i2c1: i2c@78b5000 {
1434			compatible = "qcom,i2c-qup-v2.2.1";
1435			reg = <0x078b5000 0x500>;
1436			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
1437			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
1438				 <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>;
1439			clock-names = "iface", "core";
1440			pinctrl-names = "default", "sleep";
1441			pinctrl-0 = <&i2c1_default>;
1442			pinctrl-1 = <&i2c1_sleep>;
1443			#address-cells = <1>;
1444			#size-cells = <0>;
1445			status = "disabled";
1446		};
1447
1448		blsp_spi1: spi@78b5000 {
1449			compatible = "qcom,spi-qup-v2.2.1";
1450			reg = <0x078b5000 0x500>;
1451			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
1452			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
1453				 <&gcc GCC_BLSP1_AHB_CLK>;
1454			clock-names = "core", "iface";
1455			dmas = <&blsp_dma 5>, <&blsp_dma 4>;
1456			dma-names = "rx", "tx";
1457			pinctrl-names = "default", "sleep";
1458			pinctrl-0 = <&spi1_default>;
1459			pinctrl-1 = <&spi1_sleep>;
1460			#address-cells = <1>;
1461			#size-cells = <0>;
1462			status = "disabled";
1463		};
1464
1465		blsp_i2c2: i2c@78b6000 {
1466			compatible = "qcom,i2c-qup-v2.2.1";
1467			reg = <0x078b6000 0x500>;
1468			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
1469			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
1470				 <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
1471			clock-names = "iface", "core";
1472			pinctrl-names = "default", "sleep";
1473			pinctrl-0 = <&i2c2_default>;
1474			pinctrl-1 = <&i2c2_sleep>;
1475			#address-cells = <1>;
1476			#size-cells = <0>;
1477			status = "disabled";
1478		};
1479
1480		blsp_spi2: spi@78b6000 {
1481			compatible = "qcom,spi-qup-v2.2.1";
1482			reg = <0x078b6000 0x500>;
1483			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
1484			clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>,
1485				 <&gcc GCC_BLSP1_AHB_CLK>;
1486			clock-names = "core", "iface";
1487			dmas = <&blsp_dma 7>, <&blsp_dma 6>;
1488			dma-names = "rx", "tx";
1489			pinctrl-names = "default", "sleep";
1490			pinctrl-0 = <&spi2_default>;
1491			pinctrl-1 = <&spi2_sleep>;
1492			#address-cells = <1>;
1493			#size-cells = <0>;
1494			status = "disabled";
1495		};
1496
1497		blsp_spi3: spi@78b7000 {
1498			compatible = "qcom,spi-qup-v2.2.1";
1499			reg = <0x078b7000 0x500>;
1500			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
1501			clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
1502				 <&gcc GCC_BLSP1_AHB_CLK>;
1503			clock-names = "core", "iface";
1504			dmas = <&blsp_dma 9>, <&blsp_dma 8>;
1505			dma-names = "rx", "tx";
1506			pinctrl-names = "default", "sleep";
1507			pinctrl-0 = <&spi3_default>;
1508			pinctrl-1 = <&spi3_sleep>;
1509			#address-cells = <1>;
1510			#size-cells = <0>;
1511			status = "disabled";
1512		};
1513
1514		blsp_i2c4: i2c@78b8000 {
1515			compatible = "qcom,i2c-qup-v2.2.1";
1516			reg = <0x078b8000 0x500>;
1517			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
1518			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
1519				 <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>;
1520			clock-names = "iface", "core";
1521			pinctrl-names = "default", "sleep";
1522			pinctrl-0 = <&i2c4_default>;
1523			pinctrl-1 = <&i2c4_sleep>;
1524			#address-cells = <1>;
1525			#size-cells = <0>;
1526			status = "disabled";
1527		};
1528
1529		blsp_spi4: spi@78b8000 {
1530			compatible = "qcom,spi-qup-v2.2.1";
1531			reg = <0x078b8000 0x500>;
1532			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
1533			clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
1534				 <&gcc GCC_BLSP1_AHB_CLK>;
1535			clock-names = "core", "iface";
1536			dmas = <&blsp_dma 11>, <&blsp_dma 10>;
1537			dma-names = "rx", "tx";
1538			pinctrl-names = "default", "sleep";
1539			pinctrl-0 = <&spi4_default>;
1540			pinctrl-1 = <&spi4_sleep>;
1541			#address-cells = <1>;
1542			#size-cells = <0>;
1543			status = "disabled";
1544		};
1545
1546		blsp_i2c5: i2c@78b9000 {
1547			compatible = "qcom,i2c-qup-v2.2.1";
1548			reg = <0x078b9000 0x500>;
1549			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
1550			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
1551				 <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>;
1552			clock-names = "iface", "core";
1553			pinctrl-names = "default", "sleep";
1554			pinctrl-0 = <&i2c5_default>;
1555			pinctrl-1 = <&i2c5_sleep>;
1556			#address-cells = <1>;
1557			#size-cells = <0>;
1558			status = "disabled";
1559		};
1560
1561		blsp_spi5: spi@78b9000 {
1562			compatible = "qcom,spi-qup-v2.2.1";
1563			reg = <0x078b9000 0x500>;
1564			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
1565			clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
1566				 <&gcc GCC_BLSP1_AHB_CLK>;
1567			clock-names = "core", "iface";
1568			dmas = <&blsp_dma 13>, <&blsp_dma 12>;
1569			dma-names = "rx", "tx";
1570			pinctrl-names = "default", "sleep";
1571			pinctrl-0 = <&spi5_default>;
1572			pinctrl-1 = <&spi5_sleep>;
1573			#address-cells = <1>;
1574			#size-cells = <0>;
1575			status = "disabled";
1576		};
1577
1578		blsp_i2c6: i2c@78ba000 {
1579			compatible = "qcom,i2c-qup-v2.2.1";
1580			reg = <0x078ba000 0x500>;
1581			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
1582			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
1583				 <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>;
1584			clock-names = "iface", "core";
1585			pinctrl-names = "default", "sleep";
1586			pinctrl-0 = <&i2c6_default>;
1587			pinctrl-1 = <&i2c6_sleep>;
1588			#address-cells = <1>;
1589			#size-cells = <0>;
1590			status = "disabled";
1591		};
1592
1593		blsp_spi6: spi@78ba000 {
1594			compatible = "qcom,spi-qup-v2.2.1";
1595			reg = <0x078ba000 0x500>;
1596			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
1597			clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>,
1598				 <&gcc GCC_BLSP1_AHB_CLK>;
1599			clock-names = "core", "iface";
1600			dmas = <&blsp_dma 15>, <&blsp_dma 14>;
1601			dma-names = "rx", "tx";
1602			pinctrl-names = "default", "sleep";
1603			pinctrl-0 = <&spi6_default>;
1604			pinctrl-1 = <&spi6_sleep>;
1605			#address-cells = <1>;
1606			#size-cells = <0>;
1607			status = "disabled";
1608		};
1609
1610		usb: usb@78d9000 {
1611			compatible = "qcom,ci-hdrc";
1612			reg = <0x078d9000 0x200>,
1613			      <0x078d9200 0x200>;
1614			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
1615				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
1616			clocks = <&gcc GCC_USB_HS_AHB_CLK>,
1617				 <&gcc GCC_USB_HS_SYSTEM_CLK>;
1618			clock-names = "iface", "core";
1619			assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
1620			assigned-clock-rates = <80000000>;
1621			resets = <&gcc GCC_USB_HS_BCR>;
1622			reset-names = "core";
1623			phy_type = "ulpi";
1624			dr_mode = "otg";
1625			hnp-disable;
1626			srp-disable;
1627			adp-disable;
1628			ahb-burst-config = <0>;
1629			phy-names = "usb-phy";
1630			phys = <&usb_hs_phy>;
1631			status = "disabled";
1632			#reset-cells = <1>;
1633
1634			ulpi {
1635				usb_hs_phy: phy {
1636					compatible = "qcom,usb-hs-phy-msm8916",
1637						     "qcom,usb-hs-phy";
1638					#phy-cells = <0>;
1639					clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
1640					clock-names = "ref", "sleep";
1641					resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>;
1642					reset-names = "phy", "por";
1643					qcom,init-seq = /bits/ 8 <0x0 0x44
1644						0x1 0x6b 0x2 0x24 0x3 0x13>;
1645				};
1646			};
1647		};
1648
1649		pronto: remoteproc@a21b000 {
1650			compatible = "qcom,pronto-v2-pil", "qcom,pronto";
1651			reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>;
1652			reg-names = "ccu", "dxe", "pmu";
1653
1654			memory-region = <&wcnss_mem>;
1655
1656			interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
1657					      <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
1658					      <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
1659					      <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
1660					      <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
1661			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
1662
1663			qcom,state = <&wcnss_smp2p_out 0>;
1664			qcom,state-names = "stop";
1665
1666			pinctrl-names = "default";
1667			pinctrl-0 = <&wcnss_pin_a>;
1668
1669			status = "disabled";
1670
1671			iris {
1672				compatible = "qcom,wcn3620";
1673
1674				clocks = <&rpmcc RPM_SMD_RF_CLK2>;
1675				clock-names = "xo";
1676			};
1677
1678			smd-edge {
1679				interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
1680
1681				qcom,ipc = <&apcs 8 17>;
1682				qcom,smd-edge = <6>;
1683				qcom,remote-pid = <4>;
1684
1685				label = "pronto";
1686
1687				wcnss {
1688					compatible = "qcom,wcnss";
1689					qcom,smd-channels = "WCNSS_CTRL";
1690
1691					qcom,mmio = <&pronto>;
1692
1693					bt {
1694						compatible = "qcom,wcnss-bt";
1695					};
1696
1697					wifi {
1698						compatible = "qcom,wcnss-wlan";
1699
1700						interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
1701							     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
1702						interrupt-names = "tx", "rx";
1703
1704						qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
1705						qcom,smem-state-names = "tx-enable", "tx-rings-empty";
1706					};
1707				};
1708			};
1709		};
1710
1711		intc: interrupt-controller@b000000 {
1712			compatible = "qcom,msm-qgic2";
1713			interrupt-controller;
1714			#interrupt-cells = <3>;
1715			reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>;
1716		};
1717
1718		apcs: mailbox@b011000 {
1719			compatible = "qcom,msm8916-apcs-kpss-global", "syscon";
1720			reg = <0x0b011000 0x1000>;
1721			#mbox-cells = <1>;
1722			clocks = <&a53pll>, <&gcc GPLL0_VOTE>;
1723			clock-names = "pll", "aux";
1724			#clock-cells = <0>;
1725		};
1726
1727		a53pll: clock@b016000 {
1728			compatible = "qcom,msm8916-a53pll";
1729			reg = <0x0b016000 0x40>;
1730			#clock-cells = <0>;
1731		};
1732
1733		timer@b020000 {
1734			#address-cells = <1>;
1735			#size-cells = <1>;
1736			ranges;
1737			compatible = "arm,armv7-timer-mem";
1738			reg = <0x0b020000 0x1000>;
1739			clock-frequency = <19200000>;
1740
1741			frame@b021000 {
1742				frame-number = <0>;
1743				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
1744					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
1745				reg = <0x0b021000 0x1000>,
1746				      <0x0b022000 0x1000>;
1747			};
1748
1749			frame@b023000 {
1750				frame-number = <1>;
1751				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
1752				reg = <0x0b023000 0x1000>;
1753				status = "disabled";
1754			};
1755
1756			frame@b024000 {
1757				frame-number = <2>;
1758				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
1759				reg = <0x0b024000 0x1000>;
1760				status = "disabled";
1761			};
1762
1763			frame@b025000 {
1764				frame-number = <3>;
1765				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
1766				reg = <0x0b025000 0x1000>;
1767				status = "disabled";
1768			};
1769
1770			frame@b026000 {
1771				frame-number = <4>;
1772				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
1773				reg = <0x0b026000 0x1000>;
1774				status = "disabled";
1775			};
1776
1777			frame@b027000 {
1778				frame-number = <5>;
1779				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
1780				reg = <0x0b027000 0x1000>;
1781				status = "disabled";
1782			};
1783
1784			frame@b028000 {
1785				frame-number = <6>;
1786				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
1787				reg = <0x0b028000 0x1000>;
1788				status = "disabled";
1789			};
1790		};
1791	};
1792
1793	thermal-zones {
1794		cpu0-1-thermal {
1795			polling-delay-passive = <250>;
1796			polling-delay = <1000>;
1797
1798			thermal-sensors = <&tsens 5>;
1799
1800			trips {
1801				cpu0_1_alert0: trip-point0 {
1802					temperature = <75000>;
1803					hysteresis = <2000>;
1804					type = "passive";
1805				};
1806				cpu0_1_crit: cpu_crit {
1807					temperature = <110000>;
1808					hysteresis = <2000>;
1809					type = "critical";
1810				};
1811			};
1812
1813			cooling-maps {
1814				map0 {
1815					trip = <&cpu0_1_alert0>;
1816					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
1817							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
1818							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
1819							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
1820				};
1821			};
1822		};
1823
1824		cpu2-3-thermal {
1825			polling-delay-passive = <250>;
1826			polling-delay = <1000>;
1827
1828			thermal-sensors = <&tsens 4>;
1829
1830			trips {
1831				cpu2_3_alert0: trip-point0 {
1832					temperature = <75000>;
1833					hysteresis = <2000>;
1834					type = "passive";
1835				};
1836				cpu2_3_crit: cpu_crit {
1837					temperature = <110000>;
1838					hysteresis = <2000>;
1839					type = "critical";
1840				};
1841			};
1842
1843			cooling-maps {
1844				map0 {
1845					trip = <&cpu2_3_alert0>;
1846					cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
1847							 <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
1848							 <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
1849							 <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
1850				};
1851			};
1852		};
1853
1854		gpu-thermal {
1855			polling-delay-passive = <250>;
1856			polling-delay = <1000>;
1857
1858			thermal-sensors = <&tsens 2>;
1859
1860			trips {
1861				gpu_alert0: trip-point0 {
1862					temperature = <75000>;
1863					hysteresis = <2000>;
1864					type = "passive";
1865				};
1866				gpu_crit: gpu_crit {
1867					temperature = <95000>;
1868					hysteresis = <2000>;
1869					type = "critical";
1870				};
1871			};
1872		};
1873
1874		camera-thermal {
1875			polling-delay-passive = <250>;
1876			polling-delay = <1000>;
1877
1878			thermal-sensors = <&tsens 1>;
1879
1880			trips {
1881				cam_alert0: trip-point0 {
1882					temperature = <75000>;
1883					hysteresis = <2000>;
1884					type = "hot";
1885				};
1886			};
1887		};
1888
1889		modem-thermal {
1890			polling-delay-passive = <250>;
1891			polling-delay = <1000>;
1892
1893			thermal-sensors = <&tsens 0>;
1894
1895			trips {
1896				modem_alert0: trip-point0 {
1897					temperature = <85000>;
1898					hysteresis = <2000>;
1899					type = "hot";
1900				};
1901			};
1902		};
1903
1904	};
1905
1906	timer {
1907		compatible = "arm,armv8-timer";
1908		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
1909			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
1910			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
1911			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
1912	};
1913};
1914
1915#include "msm8916-pins.dtsi"
1916