1// SPDX-License-Identifier: GPL-2.0
2/dts-v1/;
3
4#include <dt-bindings/interconnect/qcom,msm8974.h>
5#include <dt-bindings/interrupt-controller/arm-gic.h>
6#include <dt-bindings/clock/qcom,gcc-msm8974.h>
7#include <dt-bindings/clock/qcom,mmcc-msm8974.h>
8#include <dt-bindings/clock/qcom,rpmcc.h>
9#include <dt-bindings/reset/qcom,gcc-msm8974.h>
10#include <dt-bindings/gpio/gpio.h>
11
12/ {
13	#address-cells = <1>;
14	#size-cells = <1>;
15	model = "Qualcomm MSM8974";
16	compatible = "qcom,msm8974";
17	interrupt-parent = <&intc>;
18
19	reserved-memory {
20		#address-cells = <1>;
21		#size-cells = <1>;
22		ranges;
23
24		mpss_region: mpss@8000000 {
25			reg = <0x08000000 0x5100000>;
26			no-map;
27		};
28
29		mba_region: mba@d100000 {
30			reg = <0x0d100000 0x100000>;
31			no-map;
32		};
33
34		wcnss_region: wcnss@d200000 {
35			reg = <0x0d200000 0xa00000>;
36			no-map;
37		};
38
39		adsp_region: adsp@dc00000 {
40			reg = <0x0dc00000 0x1900000>;
41			no-map;
42		};
43
44		venus@f500000 {
45			reg = <0x0f500000 0x500000>;
46			no-map;
47		};
48
49		smem_region: smem@fa00000 {
50			reg = <0xfa00000 0x200000>;
51			no-map;
52		};
53
54		tz@fc00000 {
55			reg = <0x0fc00000 0x160000>;
56			no-map;
57		};
58
59		rfsa@fd60000 {
60			reg = <0x0fd60000 0x20000>;
61			no-map;
62		};
63
64		rmtfs@fd80000 {
65			compatible = "qcom,rmtfs-mem";
66			reg = <0x0fd80000 0x180000>;
67			no-map;
68
69			qcom,client-id = <1>;
70		};
71	};
72
73	cpus {
74		#address-cells = <1>;
75		#size-cells = <0>;
76		interrupts = <GIC_PPI 9 0xf04>;
77
78		CPU0: cpu@0 {
79			compatible = "qcom,krait";
80			enable-method = "qcom,kpss-acc-v2";
81			device_type = "cpu";
82			reg = <0>;
83			next-level-cache = <&L2>;
84			qcom,acc = <&acc0>;
85			qcom,saw = <&saw0>;
86			cpu-idle-states = <&CPU_SPC>;
87		};
88
89		CPU1: cpu@1 {
90			compatible = "qcom,krait";
91			enable-method = "qcom,kpss-acc-v2";
92			device_type = "cpu";
93			reg = <1>;
94			next-level-cache = <&L2>;
95			qcom,acc = <&acc1>;
96			qcom,saw = <&saw1>;
97			cpu-idle-states = <&CPU_SPC>;
98		};
99
100		CPU2: cpu@2 {
101			compatible = "qcom,krait";
102			enable-method = "qcom,kpss-acc-v2";
103			device_type = "cpu";
104			reg = <2>;
105			next-level-cache = <&L2>;
106			qcom,acc = <&acc2>;
107			qcom,saw = <&saw2>;
108			cpu-idle-states = <&CPU_SPC>;
109		};
110
111		CPU3: cpu@3 {
112			compatible = "qcom,krait";
113			enable-method = "qcom,kpss-acc-v2";
114			device_type = "cpu";
115			reg = <3>;
116			next-level-cache = <&L2>;
117			qcom,acc = <&acc3>;
118			qcom,saw = <&saw3>;
119			cpu-idle-states = <&CPU_SPC>;
120		};
121
122		L2: l2-cache {
123			compatible = "cache";
124			cache-level = <2>;
125			qcom,saw = <&saw_l2>;
126		};
127
128		idle-states {
129			CPU_SPC: spc {
130				compatible = "qcom,idle-state-spc",
131						"arm,idle-state";
132				entry-latency-us = <150>;
133				exit-latency-us = <200>;
134				min-residency-us = <2000>;
135			};
136		};
137	};
138
139	memory {
140		device_type = "memory";
141		reg = <0x0 0x0>;
142	};
143
144	thermal-zones {
145		cpu-thermal0 {
146			polling-delay-passive = <250>;
147			polling-delay = <1000>;
148
149			thermal-sensors = <&tsens 5>;
150
151			trips {
152				cpu_alert0: trip0 {
153					temperature = <75000>;
154					hysteresis = <2000>;
155					type = "passive";
156				};
157				cpu_crit0: trip1 {
158					temperature = <110000>;
159					hysteresis = <2000>;
160					type = "critical";
161				};
162			};
163		};
164
165		cpu-thermal1 {
166			polling-delay-passive = <250>;
167			polling-delay = <1000>;
168
169			thermal-sensors = <&tsens 6>;
170
171			trips {
172				cpu_alert1: trip0 {
173					temperature = <75000>;
174					hysteresis = <2000>;
175					type = "passive";
176				};
177				cpu_crit1: trip1 {
178					temperature = <110000>;
179					hysteresis = <2000>;
180					type = "critical";
181				};
182			};
183		};
184
185		cpu-thermal2 {
186			polling-delay-passive = <250>;
187			polling-delay = <1000>;
188
189			thermal-sensors = <&tsens 7>;
190
191			trips {
192				cpu_alert2: trip0 {
193					temperature = <75000>;
194					hysteresis = <2000>;
195					type = "passive";
196				};
197				cpu_crit2: trip1 {
198					temperature = <110000>;
199					hysteresis = <2000>;
200					type = "critical";
201				};
202			};
203		};
204
205		cpu-thermal3 {
206			polling-delay-passive = <250>;
207			polling-delay = <1000>;
208
209			thermal-sensors = <&tsens 8>;
210
211			trips {
212				cpu_alert3: trip0 {
213					temperature = <75000>;
214					hysteresis = <2000>;
215					type = "passive";
216				};
217				cpu_crit3: trip1 {
218					temperature = <110000>;
219					hysteresis = <2000>;
220					type = "critical";
221				};
222			};
223		};
224
225		q6-dsp-thermal {
226			polling-delay-passive = <250>;
227			polling-delay = <1000>;
228
229			thermal-sensors = <&tsens 1>;
230
231			trips {
232				q6_dsp_alert0: trip-point0 {
233					temperature = <90000>;
234					hysteresis = <2000>;
235					type = "hot";
236				};
237			};
238		};
239
240		modemtx-thermal {
241			polling-delay-passive = <250>;
242			polling-delay = <1000>;
243
244			thermal-sensors = <&tsens 2>;
245
246			trips {
247				modemtx_alert0: trip-point0 {
248					temperature = <90000>;
249					hysteresis = <2000>;
250					type = "hot";
251				};
252			};
253		};
254
255		video-thermal {
256			polling-delay-passive = <250>;
257			polling-delay = <1000>;
258
259			thermal-sensors = <&tsens 3>;
260
261			trips {
262				video_alert0: trip-point0 {
263					temperature = <95000>;
264					hysteresis = <2000>;
265					type = "hot";
266				};
267			};
268		};
269
270		wlan-thermal {
271			polling-delay-passive = <250>;
272			polling-delay = <1000>;
273
274			thermal-sensors = <&tsens 4>;
275
276			trips {
277				wlan_alert0: trip-point0 {
278					temperature = <105000>;
279					hysteresis = <2000>;
280					type = "hot";
281				};
282			};
283		};
284
285		gpu-thermal-top {
286			polling-delay-passive = <250>;
287			polling-delay = <1000>;
288
289			thermal-sensors = <&tsens 9>;
290
291			trips {
292				gpu1_alert0: trip-point0 {
293					temperature = <90000>;
294					hysteresis = <2000>;
295					type = "hot";
296				};
297			};
298		};
299
300		gpu-thermal-bottom {
301			polling-delay-passive = <250>;
302			polling-delay = <1000>;
303
304			thermal-sensors = <&tsens 10>;
305
306			trips {
307				gpu2_alert0: trip-point0 {
308					temperature = <90000>;
309					hysteresis = <2000>;
310					type = "hot";
311				};
312			};
313		};
314	};
315
316	cpu-pmu {
317		compatible = "qcom,krait-pmu";
318		interrupts = <GIC_PPI 7 0xf04>;
319	};
320
321	clocks {
322		xo_board: xo_board {
323			compatible = "fixed-clock";
324			#clock-cells = <0>;
325			clock-frequency = <19200000>;
326		};
327
328		sleep_clk: sleep_clk {
329			compatible = "fixed-clock";
330			#clock-cells = <0>;
331			clock-frequency = <32768>;
332		};
333	};
334
335	timer {
336		compatible = "arm,armv7-timer";
337		interrupts = <GIC_PPI 2 0xf08>,
338			     <GIC_PPI 3 0xf08>,
339			     <GIC_PPI 4 0xf08>,
340			     <GIC_PPI 1 0xf08>;
341		clock-frequency = <19200000>;
342	};
343
344	adsp-pil {
345		compatible = "qcom,msm8974-adsp-pil";
346
347		interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
348				      <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
349				      <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
350				      <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
351				      <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
352		interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
353
354		cx-supply = <&pm8841_s2>;
355
356		clocks = <&xo_board>;
357		clock-names = "xo";
358
359		memory-region = <&adsp_region>;
360
361		qcom,smem-states = <&adsp_smp2p_out 0>;
362		qcom,smem-state-names = "stop";
363
364		smd-edge {
365			interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
366
367			qcom,ipc = <&apcs 8 8>;
368			qcom,smd-edge = <1>;
369
370			label = "lpass";
371		};
372	};
373
374	smem {
375		compatible = "qcom,smem";
376
377		memory-region = <&smem_region>;
378		qcom,rpm-msg-ram = <&rpm_msg_ram>;
379
380		hwlocks = <&tcsr_mutex 3>;
381	};
382
383	smp2p-adsp {
384		compatible = "qcom,smp2p";
385		qcom,smem = <443>, <429>;
386
387		interrupt-parent = <&intc>;
388		interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
389
390		qcom,ipc = <&apcs 8 10>;
391
392		qcom,local-pid = <0>;
393		qcom,remote-pid = <2>;
394
395		adsp_smp2p_out: master-kernel {
396			qcom,entry-name = "master-kernel";
397			#qcom,smem-state-cells = <1>;
398		};
399
400		adsp_smp2p_in: slave-kernel {
401			qcom,entry-name = "slave-kernel";
402
403			interrupt-controller;
404			#interrupt-cells = <2>;
405		};
406	};
407
408	smp2p-modem {
409		compatible = "qcom,smp2p";
410		qcom,smem = <435>, <428>;
411
412		interrupt-parent = <&intc>;
413		interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
414
415		qcom,ipc = <&apcs 8 14>;
416
417		qcom,local-pid = <0>;
418		qcom,remote-pid = <1>;
419
420		modem_smp2p_out: master-kernel {
421			qcom,entry-name = "master-kernel";
422			#qcom,smem-state-cells = <1>;
423		};
424
425		modem_smp2p_in: slave-kernel {
426			qcom,entry-name = "slave-kernel";
427
428			interrupt-controller;
429			#interrupt-cells = <2>;
430		};
431	};
432
433	smp2p-wcnss {
434		compatible = "qcom,smp2p";
435		qcom,smem = <451>, <431>;
436
437		interrupt-parent = <&intc>;
438		interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
439
440		qcom,ipc = <&apcs 8 18>;
441
442		qcom,local-pid = <0>;
443		qcom,remote-pid = <4>;
444
445		wcnss_smp2p_out: master-kernel {
446			qcom,entry-name = "master-kernel";
447
448			#qcom,smem-state-cells = <1>;
449		};
450
451		wcnss_smp2p_in: slave-kernel {
452			qcom,entry-name = "slave-kernel";
453
454			interrupt-controller;
455			#interrupt-cells = <2>;
456		};
457	};
458
459	smsm {
460		compatible = "qcom,smsm";
461
462		#address-cells = <1>;
463		#size-cells = <0>;
464
465		qcom,ipc-1 = <&apcs 8 13>;
466		qcom,ipc-2 = <&apcs 8 9>;
467		qcom,ipc-3 = <&apcs 8 19>;
468
469		apps_smsm: apps@0 {
470			reg = <0>;
471
472			#qcom,smem-state-cells = <1>;
473		};
474
475		modem_smsm: modem@1 {
476			reg = <1>;
477			interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
478
479			interrupt-controller;
480			#interrupt-cells = <2>;
481		};
482
483		adsp_smsm: adsp@2 {
484			reg = <2>;
485			interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
486
487			interrupt-controller;
488			#interrupt-cells = <2>;
489		};
490
491		wcnss_smsm: wcnss@7 {
492			reg = <7>;
493			interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
494
495			interrupt-controller;
496			#interrupt-cells = <2>;
497		};
498	};
499
500	firmware {
501		scm {
502			compatible = "qcom,scm";
503			clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
504			clock-names = "core", "bus", "iface";
505		};
506	};
507
508	soc: soc {
509		#address-cells = <1>;
510		#size-cells = <1>;
511		ranges;
512		compatible = "simple-bus";
513
514		intc: interrupt-controller@f9000000 {
515			compatible = "qcom,msm-qgic2";
516			interrupt-controller;
517			#interrupt-cells = <3>;
518			reg = <0xf9000000 0x1000>,
519			      <0xf9002000 0x1000>;
520		};
521
522		apcs: syscon@f9011000 {
523			compatible = "syscon";
524			reg = <0xf9011000 0x1000>;
525		};
526
527		qfprom: qfprom@fc4bc000 {
528			#address-cells = <1>;
529			#size-cells = <1>;
530			compatible = "qcom,qfprom";
531			reg = <0xfc4bc000 0x1000>;
532			tsens_calib: calib@d0 {
533				reg = <0xd0 0x18>;
534			};
535			tsens_backup: backup@440 {
536				reg = <0x440 0x10>;
537			};
538		};
539
540		tsens: thermal-sensor@fc4a9000 {
541			compatible = "qcom,msm8974-tsens";
542			reg = <0xfc4a9000 0x1000>, /* TM */
543			      <0xfc4a8000 0x1000>; /* SROT */
544			nvmem-cells = <&tsens_calib>, <&tsens_backup>;
545			nvmem-cell-names = "calib", "calib_backup";
546			#qcom,sensors = <11>;
547			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
548			interrupt-names = "uplow";
549			#thermal-sensor-cells = <1>;
550		};
551
552		timer@f9020000 {
553			#address-cells = <1>;
554			#size-cells = <1>;
555			ranges;
556			compatible = "arm,armv7-timer-mem";
557			reg = <0xf9020000 0x1000>;
558			clock-frequency = <19200000>;
559
560			frame@f9021000 {
561				frame-number = <0>;
562				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
563					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
564				reg = <0xf9021000 0x1000>,
565				      <0xf9022000 0x1000>;
566			};
567
568			frame@f9023000 {
569				frame-number = <1>;
570				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
571				reg = <0xf9023000 0x1000>;
572				status = "disabled";
573			};
574
575			frame@f9024000 {
576				frame-number = <2>;
577				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
578				reg = <0xf9024000 0x1000>;
579				status = "disabled";
580			};
581
582			frame@f9025000 {
583				frame-number = <3>;
584				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
585				reg = <0xf9025000 0x1000>;
586				status = "disabled";
587			};
588
589			frame@f9026000 {
590				frame-number = <4>;
591				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
592				reg = <0xf9026000 0x1000>;
593				status = "disabled";
594			};
595
596			frame@f9027000 {
597				frame-number = <5>;
598				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
599				reg = <0xf9027000 0x1000>;
600				status = "disabled";
601			};
602
603			frame@f9028000 {
604				frame-number = <6>;
605				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
606				reg = <0xf9028000 0x1000>;
607				status = "disabled";
608			};
609		};
610
611		saw0: power-controller@f9089000 {
612			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
613			reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
614		};
615
616		saw1: power-controller@f9099000 {
617			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
618			reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>;
619		};
620
621		saw2: power-controller@f90a9000 {
622			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
623			reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>;
624		};
625
626		saw3: power-controller@f90b9000 {
627			compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
628			reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>;
629		};
630
631		saw_l2: power-controller@f9012000 {
632			compatible = "qcom,saw2";
633			reg = <0xf9012000 0x1000>;
634			regulator;
635		};
636
637		acc0: clock-controller@f9088000 {
638			compatible = "qcom,kpss-acc-v2";
639			reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>;
640		};
641
642		acc1: clock-controller@f9098000 {
643			compatible = "qcom,kpss-acc-v2";
644			reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>;
645		};
646
647		acc2: clock-controller@f90a8000 {
648			compatible = "qcom,kpss-acc-v2";
649			reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>;
650		};
651
652		acc3: clock-controller@f90b8000 {
653			compatible = "qcom,kpss-acc-v2";
654			reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>;
655		};
656
657		restart@fc4ab000 {
658			compatible = "qcom,pshold";
659			reg = <0xfc4ab000 0x4>;
660		};
661
662		gcc: clock-controller@fc400000 {
663			compatible = "qcom,gcc-msm8974";
664			#clock-cells = <1>;
665			#reset-cells = <1>;
666			#power-domain-cells = <1>;
667			reg = <0xfc400000 0x4000>;
668		};
669
670		tcsr: syscon@fd4a0000 {
671			compatible = "syscon";
672			reg = <0xfd4a0000 0x10000>;
673		};
674
675		tcsr_mutex_block: syscon@fd484000 {
676			compatible = "syscon";
677			reg = <0xfd484000 0x2000>;
678		};
679
680		mmcc: clock-controller@fd8c0000 {
681			compatible = "qcom,mmcc-msm8974";
682			#clock-cells = <1>;
683			#reset-cells = <1>;
684			#power-domain-cells = <1>;
685			reg = <0xfd8c0000 0x6000>;
686		};
687
688		tcsr_mutex: tcsr-mutex {
689			compatible = "qcom,tcsr-mutex";
690			syscon = <&tcsr_mutex_block 0 0x80>;
691
692			#hwlock-cells = <1>;
693		};
694
695		rpm_msg_ram: memory@fc428000 {
696			compatible = "qcom,rpm-msg-ram";
697			reg = <0xfc428000 0x4000>;
698		};
699
700		blsp1_uart1: serial@f991d000 {
701			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
702			reg = <0xf991d000 0x1000>;
703			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
704			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
705			clock-names = "core", "iface";
706			status = "disabled";
707		};
708
709		blsp1_uart2: serial@f991e000 {
710			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
711			reg = <0xf991e000 0x1000>;
712			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
713			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
714			clock-names = "core", "iface";
715			status = "disabled";
716		};
717
718		blsp2_uart10: serial@f9960000 {
719			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
720			reg = <0xf9960000 0x1000>;
721			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
722			clocks = <&gcc GCC_BLSP2_UART4_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
723			clock-names = "core", "iface";
724			status = "disabled";
725		};
726
727		sdhci@f9824900 {
728			compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
729			reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
730			reg-names = "hc_mem", "core_mem";
731			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
732				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
733			interrupt-names = "hc_irq", "pwr_irq";
734			clocks = <&gcc GCC_SDCC1_APPS_CLK>,
735				 <&gcc GCC_SDCC1_AHB_CLK>,
736				 <&xo_board>;
737			clock-names = "core", "iface", "xo";
738			status = "disabled";
739		};
740
741		sdhci@f9864900 {
742			compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
743			reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
744			reg-names = "hc_mem", "core_mem";
745			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
746				     <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
747			interrupt-names = "hc_irq", "pwr_irq";
748			clocks = <&gcc GCC_SDCC3_APPS_CLK>,
749				 <&gcc GCC_SDCC3_AHB_CLK>,
750				 <&xo_board>;
751			clock-names = "core", "iface", "xo";
752			status = "disabled";
753		};
754
755		sdhci@f98a4900 {
756			compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
757			reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
758			reg-names = "hc_mem", "core_mem";
759			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
760				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
761			interrupt-names = "hc_irq", "pwr_irq";
762			clocks = <&gcc GCC_SDCC2_APPS_CLK>,
763				 <&gcc GCC_SDCC2_AHB_CLK>,
764				 <&xo_board>;
765			clock-names = "core", "iface", "xo";
766			status = "disabled";
767		};
768
769		otg: usb@f9a55000 {
770			compatible = "qcom,ci-hdrc";
771			reg = <0xf9a55000 0x200>,
772			      <0xf9a55200 0x200>;
773			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
774			clocks = <&gcc GCC_USB_HS_AHB_CLK>,
775				 <&gcc GCC_USB_HS_SYSTEM_CLK>;
776			clock-names = "iface", "core";
777			assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
778			assigned-clock-rates = <75000000>;
779			resets = <&gcc GCC_USB_HS_BCR>;
780			reset-names = "core";
781			phy_type = "ulpi";
782			dr_mode = "otg";
783			ahb-burst-config = <0>;
784			phy-names = "usb-phy";
785			status = "disabled";
786			#reset-cells = <1>;
787
788			ulpi {
789				usb_hs1_phy: phy@a {
790					compatible = "qcom,usb-hs-phy-msm8974",
791						     "qcom,usb-hs-phy";
792					#phy-cells = <0>;
793					clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
794					clock-names = "ref", "sleep";
795					resets = <&gcc GCC_USB2A_PHY_BCR>, <&otg 0>;
796					reset-names = "phy", "por";
797					status = "disabled";
798				};
799
800				usb_hs2_phy: phy@b {
801					compatible = "qcom,usb-hs-phy-msm8974",
802						     "qcom,usb-hs-phy";
803					#phy-cells = <0>;
804					clocks = <&xo_board>, <&gcc GCC_USB2B_PHY_SLEEP_CLK>;
805					clock-names = "ref", "sleep";
806					resets = <&gcc GCC_USB2B_PHY_BCR>, <&otg 1>;
807					reset-names = "phy", "por";
808					status = "disabled";
809				};
810			};
811		};
812
813		rng@f9bff000 {
814			compatible = "qcom,prng";
815			reg = <0xf9bff000 0x200>;
816			clocks = <&gcc GCC_PRNG_AHB_CLK>;
817			clock-names = "core";
818		};
819
820		remoteproc@fc880000 {
821			compatible = "qcom,msm8974-mss-pil";
822			reg = <0xfc880000 0x100>, <0xfc820000 0x020>;
823			reg-names = "qdsp6", "rmb";
824
825			interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
826					      <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
827					      <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
828					      <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
829					      <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
830			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
831
832			clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
833				 <&gcc GCC_MSS_CFG_AHB_CLK>,
834				 <&gcc GCC_BOOT_ROM_AHB_CLK>,
835				 <&xo_board>;
836			clock-names = "iface", "bus", "mem", "xo";
837
838			resets = <&gcc GCC_MSS_RESTART>;
839			reset-names = "mss_restart";
840
841			cx-supply = <&pm8841_s2>;
842			mss-supply = <&pm8841_s3>;
843			mx-supply = <&pm8841_s1>;
844			pll-supply = <&pm8941_l12>;
845
846			qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>;
847
848			qcom,smem-states = <&modem_smp2p_out 0>;
849			qcom,smem-state-names = "stop";
850
851			mba {
852				memory-region = <&mba_region>;
853			};
854
855			mpss {
856				memory-region = <&mpss_region>;
857			};
858
859			smd-edge {
860				interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
861
862				qcom,ipc = <&apcs 8 12>;
863				qcom,smd-edge = <0>;
864
865				label = "modem";
866			};
867		};
868
869		pronto: remoteproc@fb21b000 {
870			compatible = "qcom,pronto-v2-pil", "qcom,pronto";
871			reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>;
872			reg-names = "ccu", "dxe", "pmu";
873
874			memory-region = <&wcnss_region>;
875
876			interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
877					      <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
878					      <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
879					      <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
880					      <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
881			interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
882
883			vddpx-supply = <&pm8941_s3>;
884
885			qcom,smem-states = <&wcnss_smp2p_out 0>;
886			qcom,smem-state-names = "stop";
887
888			status = "disabled";
889
890			iris {
891				compatible = "qcom,wcn3680";
892
893				clocks = <&rpmcc RPM_SMD_CXO_A2>;
894				clock-names = "xo";
895
896				vddxo-supply = <&pm8941_l6>;
897				vddrfa-supply = <&pm8941_l11>;
898				vddpa-supply = <&pm8941_l19>;
899				vdddig-supply = <&pm8941_s3>;
900			};
901
902			smd-edge {
903				interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
904
905				qcom,ipc = <&apcs 8 17>;
906				qcom,smd-edge = <6>;
907
908				wcnss {
909					compatible = "qcom,wcnss";
910					qcom,smd-channels = "WCNSS_CTRL";
911					status = "disabled";
912
913					qcom,mmio = <&pronto>;
914
915					bt {
916						compatible = "qcom,wcnss-bt";
917					};
918
919					wifi {
920						compatible = "qcom,wcnss-wlan";
921
922						interrupts = <GIC_SPI 145 IRQ_TYPE_EDGE_RISING>,
923							     <GIC_SPI 146 IRQ_TYPE_EDGE_RISING>;
924						interrupt-names = "tx", "rx";
925
926						qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
927						qcom,smem-state-names = "tx-enable", "tx-rings-empty";
928					};
929				};
930			};
931		};
932
933		msmgpio: pinctrl@fd510000 {
934			compatible = "qcom,msm8974-pinctrl";
935			reg = <0xfd510000 0x4000>;
936			gpio-controller;
937			gpio-ranges = <&msmgpio 0 0 146>;
938			#gpio-cells = <2>;
939			interrupt-controller;
940			#interrupt-cells = <2>;
941			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
942		};
943
944		i2c@f9923000 {
945			status = "disabled";
946			compatible = "qcom,i2c-qup-v2.1.1";
947			reg = <0xf9923000 0x1000>;
948			interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
949			clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
950			clock-names = "core", "iface";
951			#address-cells = <1>;
952			#size-cells = <0>;
953		};
954
955		i2c@f9924000 {
956			status = "disabled";
957			compatible = "qcom,i2c-qup-v2.1.1";
958			reg = <0xf9924000 0x1000>;
959			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
960			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
961			clock-names = "core", "iface";
962			#address-cells = <1>;
963			#size-cells = <0>;
964		};
965
966		blsp_i2c3: i2c@f9925000 {
967			status = "disabled";
968			compatible = "qcom,i2c-qup-v2.1.1";
969			reg = <0xf9925000 0x1000>;
970			interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
971			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
972			clock-names = "core", "iface";
973			#address-cells = <1>;
974			#size-cells = <0>;
975		};
976
977		blsp_i2c6: i2c@f9928000 {
978			status = "disabled";
979			compatible = "qcom,i2c-qup-v2.1.1";
980			reg = <0xf9928000 0x1000>;
981			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
982			clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
983			clock-names = "core", "iface";
984			#address-cells = <1>;
985			#size-cells = <0>;
986		};
987
988		blsp_i2c8: i2c@f9964000 {
989			status = "disabled";
990			compatible = "qcom,i2c-qup-v2.1.1";
991			reg = <0xf9964000 0x1000>;
992			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
993			clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
994			clock-names = "core", "iface";
995			#address-cells = <1>;
996			#size-cells = <0>;
997		};
998
999		blsp_i2c11: i2c@f9967000 {
1000			status = "disabled";
1001			compatible = "qcom,i2c-qup-v2.1.1";
1002			reg = <0xf9967000 0x1000>;
1003			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
1004			clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
1005			clock-names = "core", "iface";
1006			#address-cells = <1>;
1007			#size-cells = <0>;
1008			dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
1009			dma-names = "tx", "rx";
1010		};
1011
1012		blsp_i2c12: i2c@f9968000 {
1013			status = "disabled";
1014			compatible = "qcom,i2c-qup-v2.1.1";
1015			reg = <0xf9968000 0x1000>;
1016			interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
1017			clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
1018			clock-names = "core", "iface";
1019			#address-cells = <1>;
1020			#size-cells = <0>;
1021		};
1022
1023		spmi_bus: spmi@fc4cf000 {
1024			compatible = "qcom,spmi-pmic-arb";
1025			reg-names = "core", "intr", "cnfg";
1026			reg = <0xfc4cf000 0x1000>,
1027			      <0xfc4cb000 0x1000>,
1028			      <0xfc4ca000 0x1000>;
1029			interrupt-names = "periph_irq";
1030			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
1031			qcom,ee = <0>;
1032			qcom,channel = <0>;
1033			#address-cells = <2>;
1034			#size-cells = <0>;
1035			interrupt-controller;
1036			#interrupt-cells = <4>;
1037		};
1038
1039		blsp2_dma: dma-controller@f9944000 {
1040			compatible = "qcom,bam-v1.4.0";
1041			reg = <0xf9944000 0x19000>;
1042			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
1043			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
1044			clock-names = "bam_clk";
1045			#dma-cells = <1>;
1046			qcom,ee = <0>;
1047		};
1048
1049		etr@fc322000 {
1050			compatible = "arm,coresight-tmc", "arm,primecell";
1051			reg = <0xfc322000 0x1000>;
1052
1053			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1054			clock-names = "apb_pclk", "atclk";
1055
1056			in-ports {
1057				port {
1058					etr_in: endpoint {
1059						remote-endpoint = <&replicator_out0>;
1060					};
1061				};
1062			};
1063		};
1064
1065		tpiu@fc318000 {
1066			compatible = "arm,coresight-tpiu", "arm,primecell";
1067			reg = <0xfc318000 0x1000>;
1068
1069			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1070			clock-names = "apb_pclk", "atclk";
1071
1072			in-ports {
1073				port {
1074					tpiu_in: endpoint {
1075						remote-endpoint = <&replicator_out1>;
1076					};
1077				 };
1078			};
1079		};
1080
1081		replicator@fc31c000 {
1082			compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
1083			reg = <0xfc31c000 0x1000>;
1084
1085			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1086			clock-names = "apb_pclk", "atclk";
1087
1088			out-ports {
1089				#address-cells = <1>;
1090				#size-cells = <0>;
1091
1092				port@0 {
1093					reg = <0>;
1094					replicator_out0: endpoint {
1095						remote-endpoint = <&etr_in>;
1096					};
1097				};
1098				port@1 {
1099					reg = <1>;
1100					replicator_out1: endpoint {
1101						remote-endpoint = <&tpiu_in>;
1102					};
1103				};
1104			};
1105
1106			in-ports {
1107				port {
1108					replicator_in: endpoint {
1109						remote-endpoint = <&etf_out>;
1110					};
1111				};
1112			};
1113		};
1114
1115		etf@fc307000 {
1116			compatible = "arm,coresight-tmc", "arm,primecell";
1117			reg = <0xfc307000 0x1000>;
1118
1119			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1120			clock-names = "apb_pclk", "atclk";
1121
1122			out-ports {
1123				port {
1124					etf_out: endpoint {
1125						remote-endpoint = <&replicator_in>;
1126					};
1127				};
1128			};
1129
1130			in-ports {
1131				port {
1132					etf_in: endpoint {
1133						remote-endpoint = <&merger_out>;
1134					};
1135				};
1136			};
1137		};
1138
1139		funnel@fc31b000 {
1140			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
1141			reg = <0xfc31b000 0x1000>;
1142
1143			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1144			clock-names = "apb_pclk", "atclk";
1145
1146			in-ports {
1147				#address-cells = <1>;
1148				#size-cells = <0>;
1149
1150				/*
1151				 * Not described input ports:
1152				 * 0 - connected trought funnel to Audio, Modem and
1153				 *     Resource and Power Manager CPU's
1154				 * 2...7 - not-connected
1155				 */
1156				port@1 {
1157					reg = <1>;
1158					merger_in1: endpoint {
1159						remote-endpoint = <&funnel1_out>;
1160					};
1161				};
1162			};
1163
1164			out-ports {
1165				port {
1166					merger_out: endpoint {
1167						remote-endpoint = <&etf_in>;
1168					};
1169				};
1170			};
1171		};
1172
1173		funnel@fc31a000 {
1174			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
1175			reg = <0xfc31a000 0x1000>;
1176
1177			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1178			clock-names = "apb_pclk", "atclk";
1179
1180			in-ports {
1181				#address-cells = <1>;
1182				#size-cells = <0>;
1183
1184				/*
1185				 * Not described input ports:
1186				 * 0 - not-connected
1187				 * 1 - connected trought funnel to Multimedia CPU
1188				 * 2 - connected to Wireless CPU
1189				 * 3 - not-connected
1190				 * 4 - not-connected
1191				 * 6 - not-connected
1192				 * 7 - connected to STM
1193				 */
1194				port@5 {
1195					reg = <5>;
1196					funnel1_in5: endpoint {
1197						remote-endpoint = <&kpss_out>;
1198					};
1199				};
1200			};
1201
1202			out-ports {
1203				port {
1204					funnel1_out: endpoint {
1205						remote-endpoint = <&merger_in1>;
1206					};
1207				};
1208			};
1209		};
1210
1211		funnel@fc345000 { /* KPSS funnel only 4 inputs are used */
1212			compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
1213			reg = <0xfc345000 0x1000>;
1214
1215			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1216			clock-names = "apb_pclk", "atclk";
1217
1218			in-ports {
1219				#address-cells = <1>;
1220				#size-cells = <0>;
1221
1222				port@0 {
1223					reg = <0>;
1224					kpss_in0: endpoint {
1225						remote-endpoint = <&etm0_out>;
1226					};
1227				};
1228				port@1 {
1229					reg = <1>;
1230					kpss_in1: endpoint {
1231						remote-endpoint = <&etm1_out>;
1232					};
1233				};
1234				port@2 {
1235					reg = <2>;
1236					kpss_in2: endpoint {
1237						remote-endpoint = <&etm2_out>;
1238					};
1239				};
1240				port@3 {
1241					reg = <3>;
1242					kpss_in3: endpoint {
1243						remote-endpoint = <&etm3_out>;
1244					};
1245				};
1246			};
1247
1248			out-ports {
1249				port {
1250					kpss_out: endpoint {
1251						remote-endpoint = <&funnel1_in5>;
1252					};
1253				};
1254			};
1255		};
1256
1257		etm@fc33c000 {
1258			compatible = "arm,coresight-etm4x", "arm,primecell";
1259			reg = <0xfc33c000 0x1000>;
1260
1261			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1262			clock-names = "apb_pclk", "atclk";
1263
1264			cpu = <&CPU0>;
1265
1266			out-ports {
1267				port {
1268					etm0_out: endpoint {
1269						remote-endpoint = <&kpss_in0>;
1270					};
1271				};
1272			};
1273		};
1274
1275		etm@fc33d000 {
1276			compatible = "arm,coresight-etm4x", "arm,primecell";
1277			reg = <0xfc33d000 0x1000>;
1278
1279			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1280			clock-names = "apb_pclk", "atclk";
1281
1282			cpu = <&CPU1>;
1283
1284			out-ports {
1285				port {
1286					etm1_out: endpoint {
1287						remote-endpoint = <&kpss_in1>;
1288					};
1289				};
1290			};
1291		};
1292
1293		etm@fc33e000 {
1294			compatible = "arm,coresight-etm4x", "arm,primecell";
1295			reg = <0xfc33e000 0x1000>;
1296
1297			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1298			clock-names = "apb_pclk", "atclk";
1299
1300			cpu = <&CPU2>;
1301
1302			out-ports {
1303				port {
1304					etm2_out: endpoint {
1305						remote-endpoint = <&kpss_in2>;
1306					};
1307				};
1308			};
1309		};
1310
1311		etm@fc33f000 {
1312			compatible = "arm,coresight-etm4x", "arm,primecell";
1313			reg = <0xfc33f000 0x1000>;
1314
1315			clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
1316			clock-names = "apb_pclk", "atclk";
1317
1318			cpu = <&CPU3>;
1319
1320			out-ports {
1321				port {
1322					etm3_out: endpoint {
1323						remote-endpoint = <&kpss_in3>;
1324					};
1325				};
1326			};
1327		};
1328
1329		ocmem@fdd00000 {
1330			compatible = "qcom,msm8974-ocmem";
1331			reg = <0xfdd00000 0x2000>,
1332			      <0xfec00000 0x180000>;
1333			reg-names = "ctrl",
1334			            "mem";
1335			clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
1336			         <&mmcc OCMEMCX_OCMEMNOC_CLK>;
1337			clock-names = "core",
1338			              "iface";
1339
1340			#address-cells = <1>;
1341			#size-cells = <1>;
1342
1343			gmu_sram: gmu-sram@0 {
1344				reg = <0x0 0x100000>;
1345			};
1346		};
1347
1348		bimc: interconnect@fc380000 {
1349			reg = <0xfc380000 0x6a000>;
1350			compatible = "qcom,msm8974-bimc";
1351			#interconnect-cells = <1>;
1352			clock-names = "bus", "bus_a";
1353			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
1354			         <&rpmcc RPM_SMD_BIMC_A_CLK>;
1355		};
1356
1357		snoc: interconnect@fc460000 {
1358			reg = <0xfc460000 0x4000>;
1359			compatible = "qcom,msm8974-snoc";
1360			#interconnect-cells = <1>;
1361			clock-names = "bus", "bus_a";
1362			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
1363			         <&rpmcc RPM_SMD_SNOC_A_CLK>;
1364		};
1365
1366		pnoc: interconnect@fc468000 {
1367			reg = <0xfc468000 0x4000>;
1368			compatible = "qcom,msm8974-pnoc";
1369			#interconnect-cells = <1>;
1370			clock-names = "bus", "bus_a";
1371			clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
1372			         <&rpmcc RPM_SMD_PNOC_A_CLK>;
1373		};
1374
1375		ocmemnoc: interconnect@fc470000 {
1376			reg = <0xfc470000 0x4000>;
1377			compatible = "qcom,msm8974-ocmemnoc";
1378			#interconnect-cells = <1>;
1379			clock-names = "bus", "bus_a";
1380			clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
1381			         <&rpmcc RPM_SMD_OCMEMGX_A_CLK>;
1382		};
1383
1384		mmssnoc: interconnect@fc478000 {
1385			reg = <0xfc478000 0x4000>;
1386			compatible = "qcom,msm8974-mmssnoc";
1387			#interconnect-cells = <1>;
1388			clock-names = "bus", "bus_a";
1389			clocks = <&mmcc MMSS_S0_AXI_CLK>,
1390			         <&mmcc MMSS_S0_AXI_CLK>;
1391		};
1392
1393		cnoc: interconnect@fc480000 {
1394			reg = <0xfc480000 0x4000>;
1395			compatible = "qcom,msm8974-cnoc";
1396			#interconnect-cells = <1>;
1397			clock-names = "bus", "bus_a";
1398			clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
1399			         <&rpmcc RPM_SMD_CNOC_A_CLK>;
1400		};
1401
1402		mdss: mdss@fd900000 {
1403			status = "disabled";
1404
1405			compatible = "qcom,mdss";
1406			reg = <0xfd900000 0x100>,
1407			      <0xfd924000 0x1000>;
1408			reg-names = "mdss_phys",
1409			            "vbif_phys";
1410
1411			power-domains = <&mmcc MDSS_GDSC>;
1412
1413			clocks = <&mmcc MDSS_AHB_CLK>,
1414			         <&mmcc MDSS_AXI_CLK>,
1415			         <&mmcc MDSS_VSYNC_CLK>;
1416			clock-names = "iface",
1417			              "bus",
1418			              "vsync";
1419
1420			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
1421
1422			interrupt-controller;
1423			#interrupt-cells = <1>;
1424
1425			#address-cells = <1>;
1426			#size-cells = <1>;
1427			ranges;
1428
1429			mdp: mdp@fd900000 {
1430				status = "disabled";
1431
1432				compatible = "qcom,mdp5";
1433				reg = <0xfd900100 0x22000>;
1434				reg-names = "mdp_phys";
1435
1436				interrupt-parent = <&mdss>;
1437				interrupts = <0 0>;
1438
1439				clocks = <&mmcc MDSS_AHB_CLK>,
1440					 <&mmcc MDSS_AXI_CLK>,
1441					 <&mmcc MDSS_MDP_CLK>,
1442					 <&mmcc MDSS_VSYNC_CLK>;
1443				clock-names = "iface",
1444				              "bus",
1445				              "core",
1446				              "vsync";
1447
1448				interconnects = <&mmssnoc MNOC_MAS_MDP_PORT0 &bimc BIMC_SLV_EBI_CH0>;
1449				interconnect-names = "mdp0-mem";
1450
1451				ports {
1452					#address-cells = <1>;
1453					#size-cells = <0>;
1454
1455					port@0 {
1456						reg = <0>;
1457						mdp5_intf1_out: endpoint {
1458							remote-endpoint = <&dsi0_in>;
1459						};
1460					};
1461				};
1462			};
1463
1464			dsi0: dsi@fd922800 {
1465				status = "disabled";
1466
1467				compatible = "qcom,mdss-dsi-ctrl";
1468				reg = <0xfd922800 0x1f8>;
1469				reg-names = "dsi_ctrl";
1470
1471				interrupt-parent = <&mdss>;
1472				interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
1473
1474				assigned-clocks = <&mmcc BYTE0_CLK_SRC>,
1475				                  <&mmcc PCLK0_CLK_SRC>;
1476				assigned-clock-parents = <&dsi_phy0 0>,
1477				                         <&dsi_phy0 1>;
1478
1479				clocks = <&mmcc MDSS_MDP_CLK>,
1480				         <&mmcc MDSS_AHB_CLK>,
1481				         <&mmcc MDSS_AXI_CLK>,
1482				         <&mmcc MDSS_BYTE0_CLK>,
1483				         <&mmcc MDSS_PCLK0_CLK>,
1484				         <&mmcc MDSS_ESC0_CLK>,
1485				         <&mmcc MMSS_MISC_AHB_CLK>;
1486				clock-names = "mdp_core",
1487				              "iface",
1488				              "bus",
1489				              "byte",
1490				              "pixel",
1491				              "core",
1492				              "core_mmss";
1493
1494				phys = <&dsi_phy0>;
1495				phy-names = "dsi-phy";
1496
1497				ports {
1498					#address-cells = <1>;
1499					#size-cells = <0>;
1500
1501					port@0 {
1502						reg = <0>;
1503						dsi0_in: endpoint {
1504							remote-endpoint = <&mdp5_intf1_out>;
1505						};
1506					};
1507
1508					port@1 {
1509						reg = <1>;
1510						dsi0_out: endpoint {
1511						};
1512					};
1513				};
1514			};
1515
1516			dsi_phy0: dsi-phy@fd922a00 {
1517				status = "disabled";
1518
1519				compatible = "qcom,dsi-phy-28nm-hpm";
1520				reg = <0xfd922a00 0xd4>,
1521				      <0xfd922b00 0x280>,
1522				      <0xfd922d80 0x30>;
1523				reg-names = "dsi_pll",
1524				            "dsi_phy",
1525				            "dsi_phy_regulator";
1526
1527				#clock-cells = <1>;
1528				#phy-cells = <0>;
1529				qcom,dsi-phy-index = <0>;
1530
1531				clocks = <&mmcc MDSS_AHB_CLK>;
1532				clock-names = "iface";
1533			};
1534		};
1535
1536		imem@fe805000 {
1537			status = "disabled";
1538			compatible = "syscon", "simple-mfd";
1539			reg = <0xfe805000 0x1000>;
1540
1541			reboot-mode {
1542				compatible = "syscon-reboot-mode";
1543				offset = <0x65c>;
1544			};
1545		};
1546	};
1547
1548	smd {
1549		compatible = "qcom,smd";
1550
1551		rpm {
1552			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
1553			qcom,ipc = <&apcs 8 0>;
1554			qcom,smd-edge = <15>;
1555
1556			rpm_requests {
1557				compatible = "qcom,rpm-msm8974";
1558				qcom,smd-channels = "rpm_requests";
1559
1560				rpmcc: clock-controller {
1561					compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc";
1562					#clock-cells = <1>;
1563				};
1564
1565				pm8841-regulators {
1566					compatible = "qcom,rpm-pm8841-regulators";
1567
1568					pm8841_s1: s1 {};
1569					pm8841_s2: s2 {};
1570					pm8841_s3: s3 {};
1571					pm8841_s4: s4 {};
1572					pm8841_s5: s5 {};
1573					pm8841_s6: s6 {};
1574					pm8841_s7: s7 {};
1575					pm8841_s8: s8 {};
1576				};
1577
1578				pm8941-regulators {
1579					compatible = "qcom,rpm-pm8941-regulators";
1580
1581					pm8941_s1: s1 {};
1582					pm8941_s2: s2 {};
1583					pm8941_s3: s3 {};
1584
1585					pm8941_l1: l1 {};
1586					pm8941_l2: l2 {};
1587					pm8941_l3: l3 {};
1588					pm8941_l4: l4 {};
1589					pm8941_l5: l5 {};
1590					pm8941_l6: l6 {};
1591					pm8941_l7: l7 {};
1592					pm8941_l8: l8 {};
1593					pm8941_l9: l9 {};
1594					pm8941_l10: l10 {};
1595					pm8941_l11: l11 {};
1596					pm8941_l12: l12 {};
1597					pm8941_l13: l13 {};
1598					pm8941_l14: l14 {};
1599					pm8941_l15: l15 {};
1600					pm8941_l16: l16 {};
1601					pm8941_l17: l17 {};
1602					pm8941_l18: l18 {};
1603					pm8941_l19: l19 {};
1604					pm8941_l20: l20 {};
1605					pm8941_l21: l21 {};
1606					pm8941_l22: l22 {};
1607					pm8941_l23: l23 {};
1608					pm8941_l24: l24 {};
1609
1610					pm8941_lvs1: lvs1 {};
1611					pm8941_lvs2: lvs2 {};
1612					pm8941_lvs3: lvs3 {};
1613				};
1614			};
1615		};
1616	};
1617
1618	vreg_boost: vreg-boost {
1619		compatible = "regulator-fixed";
1620
1621		regulator-name = "vreg-boost";
1622		regulator-min-microvolt = <3150000>;
1623		regulator-max-microvolt = <3150000>;
1624
1625		regulator-always-on;
1626		regulator-boot-on;
1627
1628		gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
1629		enable-active-high;
1630
1631		pinctrl-names = "default";
1632		pinctrl-0 = <&boost_bypass_n_pin>;
1633	};
1634	vreg_vph_pwr: vreg-vph-pwr {
1635		compatible = "regulator-fixed";
1636		regulator-name = "vph-pwr";
1637
1638		regulator-min-microvolt = <3600000>;
1639		regulator-max-microvolt = <3600000>;
1640
1641		regulator-always-on;
1642	};
1643};
1644