1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 /*
3    drbd_req.h
4 
5    This file is part of DRBD by Philipp Reisner and Lars Ellenberg.
6 
7    Copyright (C) 2006-2008, LINBIT Information Technologies GmbH.
8    Copyright (C) 2006-2008, Lars Ellenberg <lars.ellenberg@linbit.com>.
9    Copyright (C) 2006-2008, Philipp Reisner <philipp.reisner@linbit.com>.
10 
11  */
12 
13 #ifndef _DRBD_REQ_H
14 #define _DRBD_REQ_H
15 
16 #include <linux/module.h>
17 
18 #include <linux/slab.h>
19 #include <linux/drbd.h>
20 #include "drbd_int.h"
21 
22 /* The request callbacks will be called in irq context by the IDE drivers,
23    and in Softirqs/Tasklets/BH context by the SCSI drivers,
24    and by the receiver and worker in kernel-thread context.
25    Try to get the locking right :) */
26 
27 /*
28  * Objects of type struct drbd_request do only exist on a R_PRIMARY node, and are
29  * associated with IO requests originating from the block layer above us.
30  *
31  * There are quite a few things that may happen to a drbd request
32  * during its lifetime.
33  *
34  *  It will be created.
35  *  It will be marked with the intention to be
36  *    submitted to local disk and/or
37  *    send via the network.
38  *
39  *  It has to be placed on the transfer log and other housekeeping lists,
40  *  In case we have a network connection.
41  *
42  *  It may be identified as a concurrent (write) request
43  *    and be handled accordingly.
44  *
45  *  It may me handed over to the local disk subsystem.
46  *  It may be completed by the local disk subsystem,
47  *    either successfully or with io-error.
48  *  In case it is a READ request, and it failed locally,
49  *    it may be retried remotely.
50  *
51  *  It may be queued for sending.
52  *  It may be handed over to the network stack,
53  *    which may fail.
54  *  It may be acknowledged by the "peer" according to the wire_protocol in use.
55  *    this may be a negative ack.
56  *  It may receive a faked ack when the network connection is lost and the
57  *  transfer log is cleaned up.
58  *  Sending may be canceled due to network connection loss.
59  *  When it finally has outlived its time,
60  *    corresponding dirty bits in the resync-bitmap may be cleared or set,
61  *    it will be destroyed,
62  *    and completion will be signalled to the originator,
63  *      with or without "success".
64  */
65 
66 enum drbd_req_event {
67 	CREATED,
68 	TO_BE_SENT,
69 	TO_BE_SUBMITTED,
70 
71 	/* XXX yes, now I am inconsistent...
72 	 * these are not "events" but "actions"
73 	 * oh, well... */
74 	QUEUE_FOR_NET_WRITE,
75 	QUEUE_FOR_NET_READ,
76 	QUEUE_FOR_SEND_OOS,
77 
78 	/* An empty flush is queued as P_BARRIER,
79 	 * which will cause it to complete "successfully",
80 	 * even if the local disk flush failed.
81 	 *
82 	 * Just like "real" requests, empty flushes (blkdev_issue_flush()) will
83 	 * only see an error if neither local nor remote data is reachable. */
84 	QUEUE_AS_DRBD_BARRIER,
85 
86 	SEND_CANCELED,
87 	SEND_FAILED,
88 	HANDED_OVER_TO_NETWORK,
89 	OOS_HANDED_TO_NETWORK,
90 	CONNECTION_LOST_WHILE_PENDING,
91 	READ_RETRY_REMOTE_CANCELED,
92 	RECV_ACKED_BY_PEER,
93 	WRITE_ACKED_BY_PEER,
94 	WRITE_ACKED_BY_PEER_AND_SIS, /* and set_in_sync */
95 	CONFLICT_RESOLVED,
96 	POSTPONE_WRITE,
97 	NEG_ACKED,
98 	BARRIER_ACKED, /* in protocol A and B */
99 	DATA_RECEIVED, /* (remote read) */
100 
101 	COMPLETED_OK,
102 	READ_COMPLETED_WITH_ERROR,
103 	READ_AHEAD_COMPLETED_WITH_ERROR,
104 	WRITE_COMPLETED_WITH_ERROR,
105 	DISCARD_COMPLETED_NOTSUPP,
106 	DISCARD_COMPLETED_WITH_ERROR,
107 
108 	ABORT_DISK_IO,
109 	RESEND,
110 	FAIL_FROZEN_DISK_IO,
111 	RESTART_FROZEN_DISK_IO,
112 	NOTHING,
113 };
114 
115 /* encoding of request states for now.  we don't actually need that many bits.
116  * we don't need to do atomic bit operations either, since most of the time we
117  * need to look at the connection state and/or manipulate some lists at the
118  * same time, so we should hold the request lock anyways.
119  */
120 enum drbd_req_state_bits {
121 	/* 3210
122 	 * 0000: no local possible
123 	 * 0001: to be submitted
124 	 *    UNUSED, we could map: 011: submitted, completion still pending
125 	 * 0110: completed ok
126 	 * 0010: completed with error
127 	 * 1001: Aborted (before completion)
128 	 * 1x10: Aborted and completed -> free
129 	 */
130 	__RQ_LOCAL_PENDING,
131 	__RQ_LOCAL_COMPLETED,
132 	__RQ_LOCAL_OK,
133 	__RQ_LOCAL_ABORTED,
134 
135 	/* 87654
136 	 * 00000: no network possible
137 	 * 00001: to be send
138 	 * 00011: to be send, on worker queue
139 	 * 00101: sent, expecting recv_ack (B) or write_ack (C)
140 	 * 11101: sent,
141 	 *        recv_ack (B) or implicit "ack" (A),
142 	 *        still waiting for the barrier ack.
143 	 *        master_bio may already be completed and invalidated.
144 	 * 11100: write acked (C),
145 	 *        data received (for remote read, any protocol)
146 	 *        or finally the barrier ack has arrived (B,A)...
147 	 *        request can be freed
148 	 * 01100: neg-acked (write, protocol C)
149 	 *        or neg-d-acked (read, any protocol)
150 	 *        or killed from the transfer log
151 	 *        during cleanup after connection loss
152 	 *        request can be freed
153 	 * 01000: canceled or send failed...
154 	 *        request can be freed
155 	 */
156 
157 	/* if "SENT" is not set, yet, this can still fail or be canceled.
158 	 * if "SENT" is set already, we still wait for an Ack packet.
159 	 * when cleared, the master_bio may be completed.
160 	 * in (B,A) the request object may still linger on the transaction log
161 	 * until the corresponding barrier ack comes in */
162 	__RQ_NET_PENDING,
163 
164 	/* If it is QUEUED, and it is a WRITE, it is also registered in the
165 	 * transfer log. Currently we need this flag to avoid conflicts between
166 	 * worker canceling the request and tl_clear_barrier killing it from
167 	 * transfer log.  We should restructure the code so this conflict does
168 	 * no longer occur. */
169 	__RQ_NET_QUEUED,
170 
171 	/* well, actually only "handed over to the network stack".
172 	 *
173 	 * TODO can potentially be dropped because of the similar meaning
174 	 * of RQ_NET_SENT and ~RQ_NET_QUEUED.
175 	 * however it is not exactly the same. before we drop it
176 	 * we must ensure that we can tell a request with network part
177 	 * from a request without, regardless of what happens to it. */
178 	__RQ_NET_SENT,
179 
180 	/* when set, the request may be freed (if RQ_NET_QUEUED is clear).
181 	 * basically this means the corresponding P_BARRIER_ACK was received */
182 	__RQ_NET_DONE,
183 
184 	/* whether or not we know (C) or pretend (B,A) that the write
185 	 * was successfully written on the peer.
186 	 */
187 	__RQ_NET_OK,
188 
189 	/* peer called drbd_set_in_sync() for this write */
190 	__RQ_NET_SIS,
191 
192 	/* keep this last, its for the RQ_NET_MASK */
193 	__RQ_NET_MAX,
194 
195 	/* Set when this is a write, clear for a read */
196 	__RQ_WRITE,
197 	__RQ_WSAME,
198 	__RQ_UNMAP,
199 	__RQ_ZEROES,
200 
201 	/* Should call drbd_al_complete_io() for this request... */
202 	__RQ_IN_ACT_LOG,
203 
204 	/* This was the most recent request during some blk_finish_plug()
205 	 * or its implicit from-schedule equivalent.
206 	 * We may use it as hint to send a P_UNPLUG_REMOTE */
207 	__RQ_UNPLUG,
208 
209 	/* The peer has sent a retry ACK */
210 	__RQ_POSTPONED,
211 
212 	/* would have been completed,
213 	 * but was not, because of drbd_suspended() */
214 	__RQ_COMPLETION_SUSP,
215 
216 	/* We expect a receive ACK (wire proto B) */
217 	__RQ_EXP_RECEIVE_ACK,
218 
219 	/* We expect a write ACK (wite proto C) */
220 	__RQ_EXP_WRITE_ACK,
221 
222 	/* waiting for a barrier ack, did an extra kref_get */
223 	__RQ_EXP_BARR_ACK,
224 };
225 
226 #define RQ_LOCAL_PENDING   (1UL << __RQ_LOCAL_PENDING)
227 #define RQ_LOCAL_COMPLETED (1UL << __RQ_LOCAL_COMPLETED)
228 #define RQ_LOCAL_OK        (1UL << __RQ_LOCAL_OK)
229 #define RQ_LOCAL_ABORTED   (1UL << __RQ_LOCAL_ABORTED)
230 
231 #define RQ_LOCAL_MASK      ((RQ_LOCAL_ABORTED << 1)-1)
232 
233 #define RQ_NET_PENDING     (1UL << __RQ_NET_PENDING)
234 #define RQ_NET_QUEUED      (1UL << __RQ_NET_QUEUED)
235 #define RQ_NET_SENT        (1UL << __RQ_NET_SENT)
236 #define RQ_NET_DONE        (1UL << __RQ_NET_DONE)
237 #define RQ_NET_OK          (1UL << __RQ_NET_OK)
238 #define RQ_NET_SIS         (1UL << __RQ_NET_SIS)
239 
240 #define RQ_NET_MASK        (((1UL << __RQ_NET_MAX)-1) & ~RQ_LOCAL_MASK)
241 
242 #define RQ_WRITE           (1UL << __RQ_WRITE)
243 #define RQ_WSAME           (1UL << __RQ_WSAME)
244 #define RQ_UNMAP           (1UL << __RQ_UNMAP)
245 #define RQ_ZEROES          (1UL << __RQ_ZEROES)
246 #define RQ_IN_ACT_LOG      (1UL << __RQ_IN_ACT_LOG)
247 #define RQ_UNPLUG          (1UL << __RQ_UNPLUG)
248 #define RQ_POSTPONED	   (1UL << __RQ_POSTPONED)
249 #define RQ_COMPLETION_SUSP (1UL << __RQ_COMPLETION_SUSP)
250 #define RQ_EXP_RECEIVE_ACK (1UL << __RQ_EXP_RECEIVE_ACK)
251 #define RQ_EXP_WRITE_ACK   (1UL << __RQ_EXP_WRITE_ACK)
252 #define RQ_EXP_BARR_ACK    (1UL << __RQ_EXP_BARR_ACK)
253 
254 /* For waking up the frozen transfer log mod_req() has to return if the request
255    should be counted in the epoch object*/
256 #define MR_WRITE       1
257 #define MR_READ        2
258 
drbd_req_make_private_bio(struct drbd_request * req,struct bio * bio_src)259 static inline void drbd_req_make_private_bio(struct drbd_request *req, struct bio *bio_src)
260 {
261 	struct bio *bio;
262 	bio = bio_clone_fast(bio_src, GFP_NOIO, &drbd_io_bio_set);
263 
264 	req->private_bio = bio;
265 
266 	bio->bi_private  = req;
267 	bio->bi_end_io   = drbd_request_endio;
268 	bio->bi_next     = NULL;
269 }
270 
271 /* Short lived temporary struct on the stack.
272  * We could squirrel the error to be returned into
273  * bio->bi_iter.bi_size, or similar. But that would be too ugly. */
274 struct bio_and_error {
275 	struct bio *bio;
276 	int error;
277 };
278 
279 extern void start_new_tl_epoch(struct drbd_connection *connection);
280 extern void drbd_req_destroy(struct kref *kref);
281 extern void _req_may_be_done(struct drbd_request *req,
282 		struct bio_and_error *m);
283 extern int __req_mod(struct drbd_request *req, enum drbd_req_event what,
284 		struct bio_and_error *m);
285 extern void complete_master_bio(struct drbd_device *device,
286 		struct bio_and_error *m);
287 extern void request_timer_fn(struct timer_list *t);
288 extern void tl_restart(struct drbd_connection *connection, enum drbd_req_event what);
289 extern void _tl_restart(struct drbd_connection *connection, enum drbd_req_event what);
290 extern void tl_abort_disk_io(struct drbd_device *device);
291 
292 /* this is in drbd_main.c */
293 extern void drbd_restart_request(struct drbd_request *req);
294 
295 /* use this if you don't want to deal with calling complete_master_bio()
296  * outside the spinlock, e.g. when walking some list on cleanup. */
_req_mod(struct drbd_request * req,enum drbd_req_event what)297 static inline int _req_mod(struct drbd_request *req, enum drbd_req_event what)
298 {
299 	struct drbd_device *device = req->device;
300 	struct bio_and_error m;
301 	int rv;
302 
303 	/* __req_mod possibly frees req, do not touch req after that! */
304 	rv = __req_mod(req, what, &m);
305 	if (m.bio)
306 		complete_master_bio(device, &m);
307 
308 	return rv;
309 }
310 
311 /* completion of master bio is outside of our spinlock.
312  * We still may or may not be inside some irqs disabled section
313  * of the lower level driver completion callback, so we need to
314  * spin_lock_irqsave here. */
req_mod(struct drbd_request * req,enum drbd_req_event what)315 static inline int req_mod(struct drbd_request *req,
316 		enum drbd_req_event what)
317 {
318 	unsigned long flags;
319 	struct drbd_device *device = req->device;
320 	struct bio_and_error m;
321 	int rv;
322 
323 	spin_lock_irqsave(&device->resource->req_lock, flags);
324 	rv = __req_mod(req, what, &m);
325 	spin_unlock_irqrestore(&device->resource->req_lock, flags);
326 
327 	if (m.bio)
328 		complete_master_bio(device, &m);
329 
330 	return rv;
331 }
332 
333 extern bool drbd_should_do_remote(union drbd_dev_state);
334 
335 #endif
336