1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Wireless USB Wire Adapter constants and structures.
4  *
5  * Copyright (C) 2005-2006 Intel Corporation.
6  * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
7  *
8  * This program is free software; you can redistribute it and/or
9  * modify it under the terms of the GNU General Public License version
10  * 2 as published by the Free Software Foundation.
11  *
12  * This program is distributed in the hope that it will be useful,
13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
15  * GNU General Public License for more details.
16  *
17  * You should have received a copy of the GNU General Public License
18  * along with this program; if not, write to the Free Software
19  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
20  * 02110-1301, USA.
21  *
22  *
23  * FIXME: docs
24  * FIXME: organize properly, group logically
25  *
26  * All the event structures are defined in uwb/spec.h, as they are
27  * common to the WHCI and WUSB radio control interfaces.
28  *
29  * References:
30  *   [WUSB] Wireless Universal Serial Bus Specification, revision 1.0, ch8
31  */
32 #ifndef __LINUX_USB_WUSB_WA_H
33 #define __LINUX_USB_WUSB_WA_H
34 
35 /**
36  * Radio Command Request for the Radio Control Interface
37  *
38  * Radio Control Interface command and event codes are the same as
39  * WHCI, and listed in include/linux/uwb.h:UWB_RC_{CMD,EVT}_*
40  */
41 enum {
42 	WA_EXEC_RC_CMD = 40,	/* Radio Control command Request */
43 };
44 
45 /* Wireless Adapter Requests ([WUSB] table 8-51) */
46 enum {
47 	WUSB_REQ_ADD_MMC_IE     = 20,
48 	WUSB_REQ_REMOVE_MMC_IE  = 21,
49 	WUSB_REQ_SET_NUM_DNTS   = 22,
50 	WUSB_REQ_SET_CLUSTER_ID = 23,
51 	WUSB_REQ_SET_DEV_INFO   = 24,
52 	WUSB_REQ_GET_TIME       = 25,
53 	WUSB_REQ_SET_STREAM_IDX = 26,
54 	WUSB_REQ_SET_WUSB_MAS   = 27,
55 	WUSB_REQ_CHAN_STOP      = 28,
56 };
57 
58 
59 /* Wireless Adapter WUSB Channel Time types ([WUSB] table 8-52) */
60 enum {
61 	WUSB_TIME_ADJ   = 0,
62 	WUSB_TIME_BPST  = 1,
63 	WUSB_TIME_WUSB  = 2,
64 };
65 
66 enum {
67 	WA_ENABLE = 0x01,
68 	WA_RESET = 0x02,
69 	RPIPE_PAUSE = 0x1,
70 	RPIPE_STALL = 0x2,
71 };
72 
73 /* Responses from Get Status request ([WUSB] section 8.3.1.6) */
74 enum {
75 	WA_STATUS_ENABLED = 0x01,
76 	WA_STATUS_RESETTING = 0x02
77 };
78 
79 enum rpipe_crs {
80 	RPIPE_CRS_CTL = 0x01,
81 	RPIPE_CRS_ISO = 0x02,
82 	RPIPE_CRS_BULK = 0x04,
83 	RPIPE_CRS_INTR = 0x08
84 };
85 
86 /**
87  * RPipe descriptor ([WUSB] section 8.5.2.11)
88  *
89  * FIXME: explain rpipes
90  */
91 struct usb_rpipe_descriptor {
92 	u8	bLength;
93 	u8	bDescriptorType;
94 	__le16  wRPipeIndex;
95 	__le16	wRequests;
96 	__le16	wBlocks;		/* rw if 0 */
97 	__le16	wMaxPacketSize;		/* rw */
98 	union {
99 		u8	dwa_bHSHubAddress;		/* rw: DWA. */
100 		u8	hwa_bMaxBurst;			/* rw: HWA. */
101 	};
102 	union {
103 		u8	dwa_bHSHubPort;		/*  rw: DWA. */
104 		u8	hwa_bDeviceInfoIndex;	/*  rw: HWA. */
105 	};
106 	u8	bSpeed;			/* rw: xfer rate 'enum uwb_phy_rate' */
107 	union {
108 		u8 dwa_bDeviceAddress;	/* rw: DWA Target device address. */
109 		u8 hwa_reserved;		/* rw: HWA. */
110 	};
111 	u8	bEndpointAddress;	/* rw: Target EP address */
112 	u8	bDataSequence;		/* ro: Current Data sequence */
113 	__le32	dwCurrentWindow;	/* ro */
114 	u8	bMaxDataSequence;	/* ro?: max supported seq */
115 	u8	bInterval;		/* rw:  */
116 	u8	bOverTheAirInterval;	/* rw:  */
117 	u8	bmAttribute;		/* ro?  */
118 	u8	bmCharacteristics;	/* ro? enum rpipe_attr, supported xsactions */
119 	u8	bmRetryOptions;		/* rw? */
120 	__le16	wNumTransactionErrors;	/* rw */
121 } __attribute__ ((packed));
122 
123 /**
124  * Wire Adapter Notification types ([WUSB] sections 8.4.5 & 8.5.4)
125  *
126  * These are the notifications coming on the notification endpoint of
127  * an HWA and a DWA.
128  */
129 enum wa_notif_type {
130 	DWA_NOTIF_RWAKE = 0x91,
131 	DWA_NOTIF_PORTSTATUS = 0x92,
132 	WA_NOTIF_TRANSFER = 0x93,
133 	HWA_NOTIF_BPST_ADJ = 0x94,
134 	HWA_NOTIF_DN = 0x95,
135 };
136 
137 /**
138  * Wire Adapter notification header
139  *
140  * Notifications coming from a wire adapter use a common header
141  * defined in [WUSB] sections 8.4.5 & 8.5.4.
142  */
143 struct wa_notif_hdr {
144 	u8 bLength;
145 	u8 bNotifyType;			/* enum wa_notif_type */
146 } __packed;
147 
148 /**
149  * HWA DN Received notification [(WUSB] section 8.5.4.2)
150  *
151  * The DNData is specified in WUSB1.0[7.6]. For each device
152  * notification we received, we just need to dispatch it.
153  *
154  * @dndata:  this is really an array of notifications, but all start
155  *           with the same header.
156  */
157 struct hwa_notif_dn {
158 	struct wa_notif_hdr hdr;
159 	u8 bSourceDeviceAddr;		/* from errata 2005/07 */
160 	u8 bmAttributes;
161 	struct wusb_dn_hdr dndata[];
162 } __packed;
163 
164 /* [WUSB] section 8.3.3 */
165 enum wa_xfer_type {
166 	WA_XFER_TYPE_CTL = 0x80,
167 	WA_XFER_TYPE_BI = 0x81,		/* bulk/interrupt */
168 	WA_XFER_TYPE_ISO = 0x82,
169 	WA_XFER_RESULT = 0x83,
170 	WA_XFER_ABORT = 0x84,
171 	WA_XFER_ISO_PACKET_INFO = 0xA0,
172 	WA_XFER_ISO_PACKET_STATUS = 0xA1,
173 };
174 
175 /* [WUSB] section 8.3.3 */
176 struct wa_xfer_hdr {
177 	u8 bLength;			/* 0x18 */
178 	u8 bRequestType;		/* 0x80 WA_REQUEST_TYPE_CTL */
179 	__le16 wRPipe;			/* RPipe index */
180 	__le32 dwTransferID;		/* Host-assigned ID */
181 	__le32 dwTransferLength;	/* Length of data to xfer */
182 	u8 bTransferSegment;
183 } __packed;
184 
185 struct wa_xfer_ctl {
186 	struct wa_xfer_hdr hdr;
187 	u8 bmAttribute;
188 	__le16 wReserved;
189 	struct usb_ctrlrequest baSetupData;
190 } __packed;
191 
192 struct wa_xfer_bi {
193 	struct wa_xfer_hdr hdr;
194 	u8 bReserved;
195 	__le16 wReserved;
196 } __packed;
197 
198 /* [WUSB] section 8.5.5 */
199 struct wa_xfer_hwaiso {
200 	struct wa_xfer_hdr hdr;
201 	u8 bReserved;
202 	__le16 wPresentationTime;
203 	__le32 dwNumOfPackets;
204 } __packed;
205 
206 struct wa_xfer_packet_info_hwaiso {
207 	__le16 wLength;
208 	u8 bPacketType;
209 	u8 bReserved;
210 	__le16 PacketLength[0];
211 } __packed;
212 
213 struct wa_xfer_packet_status_len_hwaiso {
214 	__le16 PacketLength;
215 	__le16 PacketStatus;
216 } __packed;
217 
218 struct wa_xfer_packet_status_hwaiso {
219 	__le16 wLength;
220 	u8 bPacketType;
221 	u8 bReserved;
222 	struct wa_xfer_packet_status_len_hwaiso PacketStatus[0];
223 } __packed;
224 
225 /* [WUSB] section 8.3.3.5 */
226 struct wa_xfer_abort {
227 	u8 bLength;
228 	u8 bRequestType;
229 	__le16 wRPipe;			/* RPipe index */
230 	__le32 dwTransferID;		/* Host-assigned ID */
231 } __packed;
232 
233 /**
234  * WA Transfer Complete notification ([WUSB] section 8.3.3.3)
235  *
236  */
237 struct wa_notif_xfer {
238 	struct wa_notif_hdr hdr;
239 	u8 bEndpoint;
240 	u8 Reserved;
241 } __packed;
242 
243 /** Transfer result basic codes [WUSB] table 8-15 */
244 enum {
245 	WA_XFER_STATUS_SUCCESS,
246 	WA_XFER_STATUS_HALTED,
247 	WA_XFER_STATUS_DATA_BUFFER_ERROR,
248 	WA_XFER_STATUS_BABBLE,
249 	WA_XFER_RESERVED,
250 	WA_XFER_STATUS_NOT_FOUND,
251 	WA_XFER_STATUS_INSUFFICIENT_RESOURCE,
252 	WA_XFER_STATUS_TRANSACTION_ERROR,
253 	WA_XFER_STATUS_ABORTED,
254 	WA_XFER_STATUS_RPIPE_NOT_READY,
255 	WA_XFER_INVALID_FORMAT,
256 	WA_XFER_UNEXPECTED_SEGMENT_NUMBER,
257 	WA_XFER_STATUS_RPIPE_TYPE_MISMATCH,
258 };
259 
260 /** [WUSB] section 8.3.3.4 */
261 struct wa_xfer_result {
262 	struct wa_notif_hdr hdr;
263 	__le32 dwTransferID;
264 	__le32 dwTransferLength;
265 	u8     bTransferSegment;
266 	u8     bTransferStatus;
267 	__le32 dwNumOfPackets;
268 } __packed;
269 
270 /**
271  * Wire Adapter Class Descriptor ([WUSB] section 8.5.2.7).
272  *
273  * NOTE: u16 fields are read Little Endian from the hardware.
274  *
275  * @bNumPorts is the original max number of devices that the host can
276  *            connect; we might chop this so the stack can handle
277  *            it. In case you need to access it, use wusbhc->ports_max
278  *            if it is a Wireless USB WA.
279  */
280 struct usb_wa_descriptor {
281 	u8	bLength;
282 	u8	bDescriptorType;
283 	__le16	bcdWAVersion;
284 	u8	bNumPorts;		/* don't use!! */
285 	u8	bmAttributes;		/* Reserved == 0 */
286 	__le16	wNumRPipes;
287 	__le16	wRPipeMaxBlock;
288 	u8	bRPipeBlockSize;
289 	u8	bPwrOn2PwrGood;
290 	u8	bNumMMCIEs;
291 	u8	DeviceRemovable;	/* FIXME: in DWA this is up to 16 bytes */
292 } __packed;
293 
294 /**
295  * HWA Device Information Buffer (WUSB1.0[T8.54])
296  */
297 struct hwa_dev_info {
298 	u8	bmDeviceAvailability[32];       /* FIXME: ignored for now */
299 	u8	bDeviceAddress;
300 	__le16	wPHYRates;
301 	u8	bmDeviceAttribute;
302 } __packed;
303 
304 #endif /* #ifndef __LINUX_USB_WUSB_WA_H */
305