1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3 * SL811HS register declarations and HCD data structures
4 *
5 * Copyright (C) 2004 Psion Teklogix
6 * Copyright (C) 2004 David Brownell
7 * Copyright (C) 2001 Cypress Semiconductor Inc.
8 */
9
10 /*
11 * SL811HS has transfer registers, and control registers. In host/master
12 * mode one set of registers is used; in peripheral/slave mode, another.
13 * - SL11H only has some "A" transfer registers from 0x00-0x04
14 * - SL811HS also has "B" registers from 0x08-0x0c
15 * - SL811S (or HS in slave mode) has four A+B sets, at 00, 10, 20, 30
16 */
17
18 #define SL811_EP_A(base) ((base) + 0)
19 #define SL811_EP_B(base) ((base) + 8)
20
21 #define SL811_HOST_BUF 0x00
22 #define SL811_PERIPH_EP0 0x00
23 #define SL811_PERIPH_EP1 0x10
24 #define SL811_PERIPH_EP2 0x20
25 #define SL811_PERIPH_EP3 0x30
26
27
28 /* TRANSFER REGISTERS: host and peripheral sides are similar
29 * except for the control models (master vs slave).
30 */
31 #define SL11H_HOSTCTLREG 0
32 # define SL11H_HCTLMASK_ARM 0x01
33 # define SL11H_HCTLMASK_ENABLE 0x02
34 # define SL11H_HCTLMASK_IN 0x00
35 # define SL11H_HCTLMASK_OUT 0x04
36 # define SL11H_HCTLMASK_ISOCH 0x10
37 # define SL11H_HCTLMASK_AFTERSOF 0x20
38 # define SL11H_HCTLMASK_TOGGLE 0x40
39 # define SL11H_HCTLMASK_PREAMBLE 0x80
40 #define SL11H_BUFADDRREG 1
41 #define SL11H_BUFLNTHREG 2
42 #define SL11H_PKTSTATREG 3 /* read */
43 # define SL11H_STATMASK_ACK 0x01
44 # define SL11H_STATMASK_ERROR 0x02
45 # define SL11H_STATMASK_TMOUT 0x04
46 # define SL11H_STATMASK_SEQ 0x08
47 # define SL11H_STATMASK_SETUP 0x10
48 # define SL11H_STATMASK_OVF 0x20
49 # define SL11H_STATMASK_NAK 0x40
50 # define SL11H_STATMASK_STALL 0x80
51 #define SL11H_PIDEPREG 3 /* write */
52 # define SL_SETUP 0xd0
53 # define SL_IN 0x90
54 # define SL_OUT 0x10
55 # define SL_SOF 0x50
56 # define SL_PREAMBLE 0xc0
57 # define SL_NAK 0xa0
58 # define SL_STALL 0xe0
59 # define SL_DATA0 0x30
60 # define SL_DATA1 0xb0
61 #define SL11H_XFERCNTREG 4 /* read */
62 #define SL11H_DEVADDRREG 4 /* write */
63
64
65 /* CONTROL REGISTERS: host and peripheral are very different.
66 */
67 #define SL11H_CTLREG1 5
68 # define SL11H_CTL1MASK_SOF_ENA 0x01
69 # define SL11H_CTL1MASK_FORCE 0x18
70 # define SL11H_CTL1MASK_NORMAL 0x00
71 # define SL11H_CTL1MASK_SE0 0x08 /* reset */
72 # define SL11H_CTL1MASK_J 0x10
73 # define SL11H_CTL1MASK_K 0x18 /* resume */
74 # define SL11H_CTL1MASK_LSPD 0x20
75 # define SL11H_CTL1MASK_SUSPEND 0x40
76 #define SL11H_IRQ_ENABLE 6
77 # define SL11H_INTMASK_DONE_A 0x01
78 # define SL11H_INTMASK_DONE_B 0x02
79 # define SL11H_INTMASK_SOFINTR 0x10
80 # define SL11H_INTMASK_INSRMV 0x20 /* to/from SE0 */
81 # define SL11H_INTMASK_RD 0x40
82 # define SL11H_INTMASK_DP 0x80 /* only in INTSTATREG */
83 #define SL11S_ADDRESS 7
84
85 /* 0x08-0x0c are for the B buffer (not in SL11) */
86
87 #define SL11H_IRQ_STATUS 0x0D /* write to ack */
88 #define SL11H_HWREVREG 0x0E /* read */
89 # define SL11H_HWRMASK_HWREV 0xF0
90 #define SL11H_SOFLOWREG 0x0E /* write */
91 #define SL11H_SOFTMRREG 0x0F /* read */
92
93 /* a write to this register enables SL811HS features.
94 * HOST flag presumably overrides the chip input signal?
95 */
96 #define SL811HS_CTLREG2 0x0F
97 # define SL811HS_CTL2MASK_SOF_MASK 0x3F
98 # define SL811HS_CTL2MASK_DSWAP 0x40
99 # define SL811HS_CTL2MASK_HOST 0x80
100
101 #define SL811HS_CTL2_INIT (SL811HS_CTL2MASK_HOST | 0x2e)
102
103
104 /* DATA BUFFERS: registers from 0x10..0xff are for data buffers;
105 * that's 240 bytes, which we'll split evenly between A and B sides.
106 * Only ISO can use more than 64 bytes per packet.
107 * (The SL11S has 0x40..0xff for buffers.)
108 */
109 #define H_MAXPACKET 120 /* bytes in A or B fifos */
110
111 #define SL11H_DATA_START 0x10
112 #define SL811HS_PACKET_BUF(is_a) ((is_a) \
113 ? SL11H_DATA_START \
114 : (SL11H_DATA_START + H_MAXPACKET))
115
116 /*-------------------------------------------------------------------------*/
117
118 #define LOG2_PERIODIC_SIZE 5 /* arbitrary; this matches OHCI */
119 #define PERIODIC_SIZE (1 << LOG2_PERIODIC_SIZE)
120
121 struct sl811 {
122 spinlock_t lock;
123 void __iomem *addr_reg;
124 void __iomem *data_reg;
125 struct sl811_platform_data *board;
126 struct dentry *debug_file;
127
128 unsigned long stat_insrmv;
129 unsigned long stat_wake;
130 unsigned long stat_sof;
131 unsigned long stat_a;
132 unsigned long stat_b;
133 unsigned long stat_lost;
134 unsigned long stat_overrun;
135
136 /* sw model */
137 struct timer_list timer;
138 struct sl811h_ep *next_periodic;
139 struct sl811h_ep *next_async;
140
141 struct sl811h_ep *active_a;
142 unsigned long jiffies_a;
143 struct sl811h_ep *active_b;
144 unsigned long jiffies_b;
145
146 u32 port1;
147 u8 ctrl1, ctrl2, irq_enable;
148 u16 frame;
149
150 /* async schedule: control, bulk */
151 struct list_head async;
152
153 /* periodic schedule: interrupt, iso */
154 u16 load[PERIODIC_SIZE];
155 struct sl811h_ep *periodic[PERIODIC_SIZE];
156 unsigned periodic_count;
157 };
158
hcd_to_sl811(struct usb_hcd * hcd)159 static inline struct sl811 *hcd_to_sl811(struct usb_hcd *hcd)
160 {
161 return (struct sl811 *) (hcd->hcd_priv);
162 }
163
sl811_to_hcd(struct sl811 * sl811)164 static inline struct usb_hcd *sl811_to_hcd(struct sl811 *sl811)
165 {
166 return container_of((void *) sl811, struct usb_hcd, hcd_priv);
167 }
168
169 struct sl811h_ep {
170 struct usb_host_endpoint *hep;
171 struct usb_device *udev;
172
173 u8 defctrl;
174 u8 maxpacket;
175 u8 epnum;
176 u8 nextpid;
177
178 u16 error_count;
179 u16 nak_count;
180 u16 length; /* of current packet */
181
182 /* periodic schedule */
183 u16 period;
184 u16 branch;
185 u16 load;
186 struct sl811h_ep *next;
187
188 /* async schedule */
189 struct list_head schedule;
190 };
191
192 /*-------------------------------------------------------------------------*/
193
194 /* These register utilities should work for the SL811S register API too
195 * NOTE: caller must hold sl811->lock.
196 */
197
sl811_read(struct sl811 * sl811,int reg)198 static inline u8 sl811_read(struct sl811 *sl811, int reg)
199 {
200 writeb(reg, sl811->addr_reg);
201 return readb(sl811->data_reg);
202 }
203
sl811_write(struct sl811 * sl811,int reg,u8 val)204 static inline void sl811_write(struct sl811 *sl811, int reg, u8 val)
205 {
206 writeb(reg, sl811->addr_reg);
207 writeb(val, sl811->data_reg);
208 }
209
210 static inline void
sl811_write_buf(struct sl811 * sl811,int addr,const void * buf,size_t count)211 sl811_write_buf(struct sl811 *sl811, int addr, const void *buf, size_t count)
212 {
213 const u8 *data;
214 void __iomem *data_reg;
215
216 if (!count)
217 return;
218 writeb(addr, sl811->addr_reg);
219
220 data = buf;
221 data_reg = sl811->data_reg;
222 do {
223 writeb(*data++, data_reg);
224 } while (--count);
225 }
226
227 static inline void
sl811_read_buf(struct sl811 * sl811,int addr,void * buf,size_t count)228 sl811_read_buf(struct sl811 *sl811, int addr, void *buf, size_t count)
229 {
230 u8 *data;
231 void __iomem *data_reg;
232
233 if (!count)
234 return;
235 writeb(addr, sl811->addr_reg);
236
237 data = buf;
238 data_reg = sl811->data_reg;
239 do {
240 *data++ = readb(data_reg);
241 } while (--count);
242 }
243
244 /*-------------------------------------------------------------------------*/
245
246 #ifdef PACKET_TRACE
247 # define PACKET pr_debug("sl811: "stuff)
248 #else
249 # define PACKET(stuff...) do{}while(0)
250 #endif
251
