1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*
3 * SAS host prototypes and structures header file
4 *
5 * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
6 * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
7 */
8
9 #ifndef _LIBSAS_H_
10 #define _LIBSAS_H_
11
12
13 #include <linux/timer.h>
14 #include <linux/pci.h>
15 #include <scsi/sas.h>
16 #include <linux/libata.h>
17 #include <linux/list.h>
18 #include <scsi/scsi_device.h>
19 #include <scsi/scsi_cmnd.h>
20 #include <scsi/scsi_transport_sas.h>
21 #include <linux/scatterlist.h>
22 #include <linux/slab.h>
23
24 struct block_device;
25
26 enum sas_class {
27 SAS,
28 EXPANDER
29 };
30
31 enum sas_phy_role {
32 PHY_ROLE_NONE = 0,
33 PHY_ROLE_TARGET = 0x40,
34 PHY_ROLE_INITIATOR = 0x80,
35 };
36
37 enum sas_phy_type {
38 PHY_TYPE_PHYSICAL,
39 PHY_TYPE_VIRTUAL
40 };
41
42 /* The events are mnemonically described in sas_dump.c
43 * so when updating/adding events here, please also
44 * update the other file too.
45 */
46 enum port_event {
47 PORTE_BYTES_DMAED = 0U,
48 PORTE_BROADCAST_RCVD,
49 PORTE_LINK_RESET_ERR,
50 PORTE_TIMER_EVENT,
51 PORTE_HARD_RESET,
52 PORT_NUM_EVENTS,
53 };
54
55 enum phy_event {
56 PHYE_LOSS_OF_SIGNAL = 0U,
57 PHYE_OOB_DONE,
58 PHYE_OOB_ERROR,
59 PHYE_SPINUP_HOLD, /* hot plug SATA, no COMWAKE sent */
60 PHYE_RESUME_TIMEOUT,
61 PHYE_SHUTDOWN,
62 PHY_NUM_EVENTS,
63 };
64
65 enum discover_event {
66 DISCE_DISCOVER_DOMAIN = 0U,
67 DISCE_REVALIDATE_DOMAIN,
68 DISCE_SUSPEND,
69 DISCE_RESUME,
70 DISC_NUM_EVENTS,
71 };
72
73 /* ---------- Expander Devices ---------- */
74
75 #define to_dom_device(_obj) container_of(_obj, struct domain_device, dev_obj)
76 #define to_dev_attr(_attr) container_of(_attr, struct domain_dev_attribute,\
77 attr)
78
79 enum routing_attribute {
80 DIRECT_ROUTING,
81 SUBTRACTIVE_ROUTING,
82 TABLE_ROUTING,
83 };
84
85 enum ex_phy_state {
86 PHY_EMPTY,
87 PHY_VACANT,
88 PHY_NOT_PRESENT,
89 PHY_DEVICE_DISCOVERED
90 };
91
92 struct ex_phy {
93 int phy_id;
94
95 enum ex_phy_state phy_state;
96
97 enum sas_device_type attached_dev_type;
98 enum sas_linkrate linkrate;
99
100 u8 attached_sata_host:1;
101 u8 attached_sata_dev:1;
102 u8 attached_sata_ps:1;
103
104 enum sas_protocol attached_tproto;
105 enum sas_protocol attached_iproto;
106
107 u8 attached_sas_addr[SAS_ADDR_SIZE];
108 u8 attached_phy_id;
109
110 int phy_change_count;
111 enum routing_attribute routing_attr;
112 u8 virtual:1;
113
114 int last_da_index;
115
116 struct sas_phy *phy;
117 struct sas_port *port;
118 };
119
120 struct expander_device {
121 struct list_head children;
122
123 int ex_change_count;
124 u16 max_route_indexes;
125 u8 num_phys;
126
127 u8 t2t_supp:1;
128 u8 configuring:1;
129 u8 conf_route_table:1;
130
131 u8 enclosure_logical_id[8];
132
133 struct ex_phy *ex_phy;
134 struct sas_port *parent_port;
135
136 struct mutex cmd_mutex;
137 };
138
139 /* ---------- SATA device ---------- */
140 #define ATA_RESP_FIS_SIZE 24
141
142 struct sata_device {
143 unsigned int class;
144 u8 port_no; /* port number, if this is a PM (Port) */
145
146 struct ata_port *ap;
147 struct ata_host *ata_host;
148 struct smp_resp rps_resp ____cacheline_aligned; /* report_phy_sata_resp */
149 u8 fis[ATA_RESP_FIS_SIZE];
150 };
151
152 struct ssp_device {
153 struct list_head eh_list_node; /* pending a user requested eh action */
154 struct scsi_lun reset_lun;
155 };
156
157 enum {
158 SAS_DEV_GONE,
159 SAS_DEV_FOUND, /* device notified to lldd */
160 SAS_DEV_DESTROY,
161 SAS_DEV_EH_PENDING,
162 SAS_DEV_LU_RESET,
163 SAS_DEV_RESET,
164 };
165
166 struct domain_device {
167 spinlock_t done_lock;
168 enum sas_device_type dev_type;
169
170 enum sas_linkrate linkrate;
171 enum sas_linkrate min_linkrate;
172 enum sas_linkrate max_linkrate;
173
174 int pathways;
175
176 struct domain_device *parent;
177 struct list_head siblings; /* devices on the same level */
178 struct asd_sas_port *port; /* shortcut to root of the tree */
179 struct sas_phy *phy;
180
181 struct list_head dev_list_node;
182 struct list_head disco_list_node; /* awaiting probe or destruct */
183
184 enum sas_protocol iproto;
185 enum sas_protocol tproto;
186
187 struct sas_rphy *rphy;
188
189 u8 sas_addr[SAS_ADDR_SIZE];
190 u8 hashed_sas_addr[HASHED_SAS_ADDR_SIZE];
191
192 u8 frame_rcvd[32];
193
194 union {
195 struct expander_device ex_dev;
196 struct sata_device sata_dev; /* STP & directly attached */
197 struct ssp_device ssp_dev;
198 };
199
200 void *lldd_dev;
201 unsigned long state;
202 struct kref kref;
203 };
204
205 struct sas_work {
206 struct list_head drain_node;
207 struct work_struct work;
208 };
209
dev_is_expander(enum sas_device_type type)210 static inline bool dev_is_expander(enum sas_device_type type)
211 {
212 return type == SAS_EDGE_EXPANDER_DEVICE ||
213 type == SAS_FANOUT_EXPANDER_DEVICE;
214 }
215
INIT_SAS_WORK(struct sas_work * sw,void (* fn)(struct work_struct *))216 static inline void INIT_SAS_WORK(struct sas_work *sw, void (*fn)(struct work_struct *))
217 {
218 INIT_WORK(&sw->work, fn);
219 INIT_LIST_HEAD(&sw->drain_node);
220 }
221
222 struct sas_discovery_event {
223 struct sas_work work;
224 struct asd_sas_port *port;
225 };
226
to_sas_discovery_event(struct work_struct * work)227 static inline struct sas_discovery_event *to_sas_discovery_event(struct work_struct *work)
228 {
229 struct sas_discovery_event *ev = container_of(work, typeof(*ev), work.work);
230
231 return ev;
232 }
233
234 struct sas_discovery {
235 struct sas_discovery_event disc_work[DISC_NUM_EVENTS];
236 unsigned long pending;
237 u8 fanout_sas_addr[SAS_ADDR_SIZE];
238 u8 eeds_a[SAS_ADDR_SIZE];
239 u8 eeds_b[SAS_ADDR_SIZE];
240 int max_level;
241 };
242
243 /* The port struct is Class:RW, driver:RO */
244 struct asd_sas_port {
245 /* private: */
246 struct sas_discovery disc;
247 struct domain_device *port_dev;
248 spinlock_t dev_list_lock;
249 struct list_head dev_list;
250 struct list_head disco_list;
251 struct list_head destroy_list;
252 struct list_head sas_port_del_list;
253 enum sas_linkrate linkrate;
254
255 struct sas_work work;
256 int suspended;
257
258 /* public: */
259 int id;
260
261 enum sas_class class;
262 u8 sas_addr[SAS_ADDR_SIZE];
263 u8 attached_sas_addr[SAS_ADDR_SIZE];
264 enum sas_protocol iproto;
265 enum sas_protocol tproto;
266
267 enum sas_oob_mode oob_mode;
268
269 spinlock_t phy_list_lock;
270 struct list_head phy_list;
271 int num_phys;
272 u32 phy_mask;
273
274 struct sas_ha_struct *ha;
275
276 struct sas_port *port;
277
278 void *lldd_port; /* not touched by the sas class code */
279 };
280
281 struct asd_sas_event {
282 struct sas_work work;
283 struct asd_sas_phy *phy;
284 int event;
285 };
286
to_asd_sas_event(struct work_struct * work)287 static inline struct asd_sas_event *to_asd_sas_event(struct work_struct *work)
288 {
289 struct asd_sas_event *ev = container_of(work, typeof(*ev), work.work);
290
291 return ev;
292 }
293
INIT_SAS_EVENT(struct asd_sas_event * ev,void (* fn)(struct work_struct *),struct asd_sas_phy * phy,int event)294 static inline void INIT_SAS_EVENT(struct asd_sas_event *ev,
295 void (*fn)(struct work_struct *),
296 struct asd_sas_phy *phy, int event)
297 {
298 INIT_SAS_WORK(&ev->work, fn);
299 ev->phy = phy;
300 ev->event = event;
301 }
302
303 #define SAS_PHY_SHUTDOWN_THRES 1024
304
305 /* The phy pretty much is controlled by the LLDD.
306 * The class only reads those fields.
307 */
308 struct asd_sas_phy {
309 /* private: */
310 atomic_t event_nr;
311 int in_shutdown;
312 int error;
313 int suspended;
314
315 struct sas_phy *phy;
316
317 /* public: */
318 /* The following are class:RO, driver:R/W */
319 int enabled; /* must be set */
320
321 int id; /* must be set */
322 enum sas_class class;
323 enum sas_protocol iproto;
324 enum sas_protocol tproto;
325
326 enum sas_phy_type type;
327 enum sas_phy_role role;
328 enum sas_oob_mode oob_mode;
329 enum sas_linkrate linkrate;
330
331 u8 *sas_addr; /* must be set */
332 u8 attached_sas_addr[SAS_ADDR_SIZE]; /* class:RO, driver: R/W */
333
334 spinlock_t frame_rcvd_lock;
335 u8 *frame_rcvd; /* must be set */
336 int frame_rcvd_size;
337
338 spinlock_t sas_prim_lock;
339 u32 sas_prim;
340
341 struct list_head port_phy_el; /* driver:RO */
342 struct asd_sas_port *port; /* Class:RW, driver: RO */
343
344 struct sas_ha_struct *ha; /* may be set; the class sets it anyway */
345
346 void *lldd_phy; /* not touched by the sas_class_code */
347 };
348
349 struct scsi_core {
350 struct Scsi_Host *shost;
351
352 };
353
354 enum sas_ha_state {
355 SAS_HA_REGISTERED,
356 SAS_HA_DRAINING,
357 SAS_HA_ATA_EH_ACTIVE,
358 SAS_HA_FROZEN,
359 };
360
361 struct sas_ha_struct {
362 /* private: */
363 struct list_head defer_q; /* work queued while draining */
364 struct mutex drain_mutex;
365 unsigned long state;
366 spinlock_t lock;
367 int eh_active;
368 wait_queue_head_t eh_wait_q;
369 struct list_head eh_dev_q;
370
371 struct mutex disco_mutex;
372
373 struct scsi_core core;
374
375 /* public: */
376 char *sas_ha_name;
377 struct device *dev; /* should be set */
378 struct module *lldd_module; /* should be set */
379
380 struct workqueue_struct *event_q;
381 struct workqueue_struct *disco_q;
382
383 u8 *sas_addr; /* must be set */
384 u8 hashed_sas_addr[HASHED_SAS_ADDR_SIZE];
385
386 spinlock_t phy_port_lock;
387 struct asd_sas_phy **sas_phy; /* array of valid pointers, must be set */
388 struct asd_sas_port **sas_port; /* array of valid pointers, must be set */
389 int num_phys; /* must be set, gt 0, static */
390
391 int strict_wide_ports; /* both sas_addr and attached_sas_addr must match
392 * their siblings when forming wide ports */
393
394 /* LLDD calls these to notify the class of an event. */
395 int (*notify_port_event)(struct asd_sas_phy *, enum port_event);
396 int (*notify_phy_event)(struct asd_sas_phy *, enum phy_event);
397
398 void *lldd_ha; /* not touched by sas class code */
399
400 struct list_head eh_done_q; /* complete via scsi_eh_flush_done_q */
401 struct list_head eh_ata_q; /* scmds to promote from sas to ata eh */
402
403 int event_thres;
404 };
405
406 #define SHOST_TO_SAS_HA(_shost) (*(struct sas_ha_struct **)(_shost)->hostdata)
407
408 static inline struct domain_device *
starget_to_domain_dev(struct scsi_target * starget)409 starget_to_domain_dev(struct scsi_target *starget) {
410 return starget->hostdata;
411 }
412
413 static inline struct domain_device *
sdev_to_domain_dev(struct scsi_device * sdev)414 sdev_to_domain_dev(struct scsi_device *sdev) {
415 return starget_to_domain_dev(sdev->sdev_target);
416 }
417
sas_to_ata_dev(struct domain_device * dev)418 static inline struct ata_device *sas_to_ata_dev(struct domain_device *dev)
419 {
420 return &dev->sata_dev.ap->link.device[0];
421 }
422
423 static inline struct domain_device *
cmd_to_domain_dev(struct scsi_cmnd * cmd)424 cmd_to_domain_dev(struct scsi_cmnd *cmd)
425 {
426 return sdev_to_domain_dev(cmd->device);
427 }
428
429 void sas_hash_addr(u8 *hashed, const u8 *sas_addr);
430
431 /* Before calling a notify event, LLDD should use this function
432 * when the link is severed (possibly from its tasklet).
433 * The idea is that the Class only reads those, while the LLDD,
434 * can R/W these (thus avoiding a race).
435 */
sas_phy_disconnected(struct asd_sas_phy * phy)436 static inline void sas_phy_disconnected(struct asd_sas_phy *phy)
437 {
438 phy->oob_mode = OOB_NOT_CONNECTED;
439 phy->linkrate = SAS_LINK_RATE_UNKNOWN;
440 }
441
to_sas_gpio_od(int device,int bit)442 static inline unsigned int to_sas_gpio_od(int device, int bit)
443 {
444 return 3 * device + bit;
445 }
446
sas_put_local_phy(struct sas_phy * phy)447 static inline void sas_put_local_phy(struct sas_phy *phy)
448 {
449 put_device(&phy->dev);
450 }
451
452 #ifdef CONFIG_SCSI_SAS_HOST_SMP
453 int try_test_sas_gpio_gp_bit(unsigned int od, u8 *data, u8 index, u8 count);
454 #else
try_test_sas_gpio_gp_bit(unsigned int od,u8 * data,u8 index,u8 count)455 static inline int try_test_sas_gpio_gp_bit(unsigned int od, u8 *data, u8 index, u8 count)
456 {
457 return -1;
458 }
459 #endif
460
461 /* ---------- Tasks ---------- */
462 /*
463 service_response | SAS_TASK_COMPLETE | SAS_TASK_UNDELIVERED |
464 exec_status | | |
465 ---------------------+---------------------+-----------------------+
466 SAM_... | X | |
467 DEV_NO_RESPONSE | X | X |
468 INTERRUPTED | X | |
469 QUEUE_FULL | | X |
470 DEVICE_UNKNOWN | | X |
471 SG_ERR | | X |
472 ---------------------+---------------------+-----------------------+
473 */
474
475 enum service_response {
476 SAS_TASK_COMPLETE,
477 SAS_TASK_UNDELIVERED = -1,
478 };
479
480 enum exec_status {
481 /* The SAM_STAT_.. codes fit in the lower 6 bits, alias some of
482 * them here to silence 'case value not in enumerated type' warnings
483 */
484 __SAM_STAT_CHECK_CONDITION = SAM_STAT_CHECK_CONDITION,
485
486 SAS_DEV_NO_RESPONSE = 0x80,
487 SAS_DATA_UNDERRUN,
488 SAS_DATA_OVERRUN,
489 SAS_INTERRUPTED,
490 SAS_QUEUE_FULL,
491 SAS_DEVICE_UNKNOWN,
492 SAS_SG_ERR,
493 SAS_OPEN_REJECT,
494 SAS_OPEN_TO,
495 SAS_PROTO_RESPONSE,
496 SAS_PHY_DOWN,
497 SAS_NAK_R_ERR,
498 SAS_PENDING,
499 SAS_ABORTED_TASK,
500 };
501
502 /* When a task finishes with a response, the LLDD examines the
503 * response:
504 * - For an ATA task task_status_struct::stat is set to
505 * SAS_PROTO_RESPONSE, and the task_status_struct::buf is set to the
506 * contents of struct ata_task_resp.
507 * - For SSP tasks, if no data is present or status/TMF response
508 * is valid, task_status_struct::stat is set. If data is present
509 * (SENSE data), the LLDD copies up to SAS_STATUS_BUF_SIZE, sets
510 * task_status_struct::buf_valid_size, and task_status_struct::stat is
511 * set to SAM_CHECK_COND.
512 *
513 * "buf" has format SCSI Sense for SSP task, or struct ata_task_resp
514 * for ATA task.
515 *
516 * "frame_len" is the total frame length, which could be more or less
517 * than actually copied.
518 *
519 * Tasks ending with response, always set the residual field.
520 */
521 struct ata_task_resp {
522 u16 frame_len;
523 u8 ending_fis[ATA_RESP_FIS_SIZE]; /* dev to host or data-in */
524 };
525
526 #define SAS_STATUS_BUF_SIZE 96
527
528 struct task_status_struct {
529 enum service_response resp;
530 enum exec_status stat;
531 int buf_valid_size;
532
533 u8 buf[SAS_STATUS_BUF_SIZE];
534
535 u32 residual;
536 enum sas_open_rej_reason open_rej_reason;
537 };
538
539 /* ATA and ATAPI task queuable to a SAS LLDD.
540 */
541 struct sas_ata_task {
542 struct host_to_dev_fis fis;
543 u8 atapi_packet[16]; /* 0 if not ATAPI task */
544
545 u8 retry_count; /* hardware retry, should be > 0 */
546
547 u8 dma_xfer:1; /* PIO:0 or DMA:1 */
548 u8 use_ncq:1;
549 u8 set_affil_pol:1;
550 u8 stp_affil_pol:1;
551
552 u8 device_control_reg_update:1;
553 };
554
555 struct sas_smp_task {
556 struct scatterlist smp_req;
557 struct scatterlist smp_resp;
558 };
559
560 enum task_attribute {
561 TASK_ATTR_SIMPLE = 0,
562 TASK_ATTR_HOQ = 1,
563 TASK_ATTR_ORDERED= 2,
564 TASK_ATTR_ACA = 4,
565 };
566
567 struct sas_ssp_task {
568 u8 retry_count; /* hardware retry, should be > 0 */
569
570 u8 LUN[8];
571 u8 enable_first_burst:1;
572 enum task_attribute task_attr;
573 u8 task_prio;
574 struct scsi_cmnd *cmd;
575 };
576
577 struct sas_task {
578 struct domain_device *dev;
579
580 spinlock_t task_state_lock;
581 unsigned task_state_flags;
582
583 enum sas_protocol task_proto;
584
585 union {
586 struct sas_ata_task ata_task;
587 struct sas_smp_task smp_task;
588 struct sas_ssp_task ssp_task;
589 };
590
591 struct scatterlist *scatter;
592 int num_scatter;
593 u32 total_xfer_len;
594 u8 data_dir:2; /* Use PCI_DMA_... */
595
596 struct task_status_struct task_status;
597 void (*task_done)(struct sas_task *);
598
599 void *lldd_task; /* for use by LLDDs */
600 void *uldd_task;
601 struct sas_task_slow *slow_task;
602 };
603
604 struct sas_task_slow {
605 /* standard/extra infrastructure for slow path commands (SMP and
606 * internal lldd commands
607 */
608 struct timer_list timer;
609 struct completion completion;
610 struct sas_task *task;
611 };
612
613 #define SAS_TASK_STATE_PENDING 1
614 #define SAS_TASK_STATE_DONE 2
615 #define SAS_TASK_STATE_ABORTED 4
616 #define SAS_TASK_NEED_DEV_RESET 8
617 #define SAS_TASK_AT_INITIATOR 16
618
619 extern struct sas_task *sas_alloc_task(gfp_t flags);
620 extern struct sas_task *sas_alloc_slow_task(gfp_t flags);
621 extern void sas_free_task(struct sas_task *task);
622
623 struct sas_domain_function_template {
624 /* The class calls these to notify the LLDD of an event. */
625 void (*lldd_port_formed)(struct asd_sas_phy *);
626 void (*lldd_port_deformed)(struct asd_sas_phy *);
627
628 /* The class calls these when a device is found or gone. */
629 int (*lldd_dev_found)(struct domain_device *);
630 void (*lldd_dev_gone)(struct domain_device *);
631
632 int (*lldd_execute_task)(struct sas_task *, gfp_t gfp_flags);
633
634 /* Task Management Functions. Must be called from process context. */
635 int (*lldd_abort_task)(struct sas_task *);
636 int (*lldd_abort_task_set)(struct domain_device *, u8 *lun);
637 int (*lldd_clear_aca)(struct domain_device *, u8 *lun);
638 int (*lldd_clear_task_set)(struct domain_device *, u8 *lun);
639 int (*lldd_I_T_nexus_reset)(struct domain_device *);
640 int (*lldd_ata_check_ready)(struct domain_device *);
641 void (*lldd_ata_set_dmamode)(struct domain_device *);
642 int (*lldd_lu_reset)(struct domain_device *, u8 *lun);
643 int (*lldd_query_task)(struct sas_task *);
644
645 /* Port and Adapter management */
646 int (*lldd_clear_nexus_port)(struct asd_sas_port *);
647 int (*lldd_clear_nexus_ha)(struct sas_ha_struct *);
648
649 /* Phy management */
650 int (*lldd_control_phy)(struct asd_sas_phy *, enum phy_func, void *);
651
652 /* GPIO support */
653 int (*lldd_write_gpio)(struct sas_ha_struct *, u8 reg_type,
654 u8 reg_index, u8 reg_count, u8 *write_data);
655 };
656
657 extern int sas_register_ha(struct sas_ha_struct *);
658 extern int sas_unregister_ha(struct sas_ha_struct *);
659 extern void sas_prep_resume_ha(struct sas_ha_struct *sas_ha);
660 extern void sas_resume_ha(struct sas_ha_struct *sas_ha);
661 extern void sas_suspend_ha(struct sas_ha_struct *sas_ha);
662
663 int sas_set_phy_speed(struct sas_phy *phy, struct sas_phy_linkrates *rates);
664 int sas_phy_reset(struct sas_phy *phy, int hard_reset);
665 extern int sas_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
666 extern int sas_target_alloc(struct scsi_target *);
667 extern int sas_slave_configure(struct scsi_device *);
668 extern int sas_change_queue_depth(struct scsi_device *, int new_depth);
669 extern int sas_bios_param(struct scsi_device *, struct block_device *,
670 sector_t capacity, int *hsc);
671 extern struct scsi_transport_template *
672 sas_domain_attach_transport(struct sas_domain_function_template *);
673 extern struct device_attribute dev_attr_phy_event_threshold;
674
675 int sas_discover_root_expander(struct domain_device *);
676
677 void sas_init_ex_attr(void);
678
679 int sas_ex_revalidate_domain(struct domain_device *);
680
681 void sas_unregister_domain_devices(struct asd_sas_port *port, int gone);
682 void sas_init_disc(struct sas_discovery *disc, struct asd_sas_port *);
683 int sas_discover_event(struct asd_sas_port *, enum discover_event ev);
684
685 int sas_discover_sata(struct domain_device *);
686 int sas_discover_end_dev(struct domain_device *);
687
688 void sas_unregister_dev(struct asd_sas_port *port, struct domain_device *);
689
690 void sas_init_dev(struct domain_device *);
691
692 void sas_task_abort(struct sas_task *);
693 int sas_eh_abort_handler(struct scsi_cmnd *cmd);
694 int sas_eh_device_reset_handler(struct scsi_cmnd *cmd);
695 int sas_eh_target_reset_handler(struct scsi_cmnd *cmd);
696
697 extern void sas_target_destroy(struct scsi_target *);
698 extern int sas_slave_alloc(struct scsi_device *);
699 extern int sas_ioctl(struct scsi_device *sdev, unsigned int cmd,
700 void __user *arg);
701 extern int sas_drain_work(struct sas_ha_struct *ha);
702
703 extern void sas_ssp_task_response(struct device *dev, struct sas_task *task,
704 struct ssp_response_iu *iu);
705 struct sas_phy *sas_get_local_phy(struct domain_device *dev);
706
707 int sas_request_addr(struct Scsi_Host *shost, u8 *addr);
708
709 #endif /* _SASLIB_H_ */
710
