1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 #ifndef __HWMON_NCT6775_H__
3 #define __HWMON_NCT6775_H__
4
5 #include <linux/types.h>
6
7 enum kinds { nct6106, nct6116, nct6775, nct6776, nct6779, nct6791, nct6792,
8 nct6793, nct6795, nct6796, nct6797, nct6798, nct6799 };
9 enum pwm_enable { off, manual, thermal_cruise, speed_cruise, sf3, sf4 };
10
11 #define NUM_TEMP 12 /* Max number of temp attribute sets w/ limits*/
12 #define NUM_TEMP_FIXED 6 /* Max number of fixed temp attribute sets */
13 #define NUM_TSI_TEMP 8 /* Max number of TSI temp register pairs */
14
15 #define NUM_REG_ALARM 7 /* Max number of alarm registers */
16 #define NUM_REG_BEEP 5 /* Max number of beep registers */
17
18 #define NUM_FAN 7
19 #define NUM_IN 18
20
21 struct nct6775_data {
22 int addr; /* IO base of hw monitor block */
23 int sioreg; /* SIO register address */
24 enum kinds kind;
25 const char *name;
26
27 const struct attribute_group *groups[7];
28 u8 num_groups;
29
30 u16 reg_temp[5][NUM_TEMP]; /* 0=temp, 1=temp_over, 2=temp_hyst,
31 * 3=temp_crit, 4=temp_lcrit
32 */
33 u8 temp_src[NUM_TEMP];
34 u16 reg_temp_config[NUM_TEMP];
35 const char * const *temp_label;
36 u32 temp_mask;
37 u32 virt_temp_mask;
38
39 u16 REG_CONFIG;
40 u16 REG_VBAT;
41 u16 REG_DIODE;
42 u8 DIODE_MASK;
43
44 const s8 *ALARM_BITS;
45 const s8 *BEEP_BITS;
46
47 const u16 *REG_VIN;
48 const u16 *REG_IN_MINMAX[2];
49
50 const u16 *REG_TARGET;
51 const u16 *REG_FAN;
52 const u16 *REG_FAN_MODE;
53 const u16 *REG_FAN_MIN;
54 const u16 *REG_FAN_PULSES;
55 const u16 *FAN_PULSE_SHIFT;
56 const u16 *REG_FAN_TIME[3];
57
58 const u16 *REG_TOLERANCE_H;
59
60 const u8 *REG_PWM_MODE;
61 const u8 *PWM_MODE_MASK;
62
63 const u16 *REG_PWM[7]; /* [0]=pwm, [1]=pwm_start, [2]=pwm_floor,
64 * [3]=pwm_max, [4]=pwm_step,
65 * [5]=weight_duty_step, [6]=weight_duty_base
66 */
67 const u16 *REG_PWM_READ;
68
69 const u16 *REG_CRITICAL_PWM_ENABLE;
70 u8 CRITICAL_PWM_ENABLE_MASK;
71 const u16 *REG_CRITICAL_PWM;
72
73 const u16 *REG_AUTO_TEMP;
74 const u16 *REG_AUTO_PWM;
75
76 const u16 *REG_CRITICAL_TEMP;
77 const u16 *REG_CRITICAL_TEMP_TOLERANCE;
78
79 const u16 *REG_TEMP_SOURCE; /* temp register sources */
80 const u16 *REG_TEMP_SEL;
81 const u16 *REG_WEIGHT_TEMP_SEL;
82 const u16 *REG_WEIGHT_TEMP[3]; /* 0=base, 1=tolerance, 2=step */
83
84 const u16 *REG_TEMP_OFFSET;
85
86 const u16 *REG_ALARM;
87 const u16 *REG_BEEP;
88
89 const u16 *REG_TSI_TEMP;
90
91 unsigned int (*fan_from_reg)(u16 reg, unsigned int divreg);
92 unsigned int (*fan_from_reg_min)(u16 reg, unsigned int divreg);
93
94 struct mutex update_lock;
95 bool valid; /* true if following fields are valid */
96 unsigned long last_updated; /* In jiffies */
97
98 /* Register values */
99 u8 bank; /* current register bank */
100 u8 in_num; /* number of in inputs we have */
101 u8 in[NUM_IN][3]; /* [0]=in, [1]=in_max, [2]=in_min */
102 const u16 *scale_in; /* internal scaling factors */
103 unsigned int rpm[NUM_FAN];
104 u16 fan_min[NUM_FAN];
105 u8 fan_pulses[NUM_FAN];
106 u8 fan_div[NUM_FAN];
107 u8 has_pwm;
108 u8 has_fan; /* some fan inputs can be disabled */
109 u8 has_fan_min; /* some fans don't have min register */
110 bool has_fan_div;
111
112 u8 num_temp_alarms; /* 2, 3, or 6 */
113 u8 num_temp_beeps; /* 2, 3, or 6 */
114 u8 temp_fixed_num; /* 3 or 6 */
115 u8 temp_type[NUM_TEMP_FIXED];
116 s8 temp_offset[NUM_TEMP_FIXED];
117 s16 temp[5][NUM_TEMP]; /* 0=temp, 1=temp_over, 2=temp_hyst,
118 * 3=temp_crit, 4=temp_lcrit
119 */
120 s16 tsi_temp[NUM_TSI_TEMP];
121 u64 alarms;
122 u64 beeps;
123
124 u8 pwm_num; /* number of pwm */
125 u8 pwm_mode[NUM_FAN]; /* 0->DC variable voltage,
126 * 1->PWM variable duty cycle
127 */
128 enum pwm_enable pwm_enable[NUM_FAN];
129 /* 0->off
130 * 1->manual
131 * 2->thermal cruise mode (also called SmartFan I)
132 * 3->fan speed cruise mode
133 * 4->SmartFan III
134 * 5->enhanced variable thermal cruise (SmartFan IV)
135 */
136 u8 pwm[7][NUM_FAN]; /* [0]=pwm, [1]=pwm_start, [2]=pwm_floor,
137 * [3]=pwm_max, [4]=pwm_step,
138 * [5]=weight_duty_step, [6]=weight_duty_base
139 */
140
141 u8 target_temp[NUM_FAN];
142 u8 target_temp_mask;
143 u32 target_speed[NUM_FAN];
144 u32 target_speed_tolerance[NUM_FAN];
145 u8 speed_tolerance_limit;
146
147 u8 temp_tolerance[2][NUM_FAN];
148 u8 tolerance_mask;
149
150 u8 fan_time[3][NUM_FAN]; /* 0 = stop_time, 1 = step_up, 2 = step_down */
151
152 /* Automatic fan speed control registers */
153 int auto_pwm_num;
154 u8 auto_pwm[NUM_FAN][7];
155 u8 auto_temp[NUM_FAN][7];
156 u8 pwm_temp_sel[NUM_FAN];
157 u8 pwm_weight_temp_sel[NUM_FAN];
158 u8 weight_temp[3][NUM_FAN]; /* 0->temp_step, 1->temp_step_tol,
159 * 2->temp_base
160 */
161
162 u8 vid;
163 u8 vrm;
164
165 bool have_vid;
166
167 u16 have_temp;
168 u16 have_temp_fixed;
169 u16 have_tsi_temp;
170 u32 have_in;
171
172 /* Remember extra register values over suspend/resume */
173 u8 vbat;
174 u8 fandiv1;
175 u8 fandiv2;
176 u8 sio_reg_enable;
177
178 struct regmap *regmap;
179 bool read_only;
180
181 /* driver-specific (platform, i2c) initialization hook and data */
182 int (*driver_init)(struct nct6775_data *data);
183 void *driver_data;
184 };
185
nct6775_read_value(struct nct6775_data * data,u16 reg,u16 * value)186 static inline int nct6775_read_value(struct nct6775_data *data, u16 reg, u16 *value)
187 {
188 unsigned int tmp;
189 int ret = regmap_read(data->regmap, reg, &tmp);
190
191 if (!ret)
192 *value = tmp;
193 return ret;
194 }
195
nct6775_write_value(struct nct6775_data * data,u16 reg,u16 value)196 static inline int nct6775_write_value(struct nct6775_data *data, u16 reg, u16 value)
197 {
198 return regmap_write(data->regmap, reg, value);
199 }
200
201 struct nct6775_data *nct6775_update_device(struct device *dev);
202
203 bool nct6775_reg_is_word_sized(struct nct6775_data *data, u16 reg);
204 int nct6775_probe(struct device *dev, struct nct6775_data *data,
205 const struct regmap_config *regmapcfg);
206
207 ssize_t nct6775_show_alarm(struct device *dev, struct device_attribute *attr, char *buf);
208 ssize_t nct6775_show_beep(struct device *dev, struct device_attribute *attr, char *buf);
209 ssize_t nct6775_store_beep(struct device *dev, struct device_attribute *attr, const char *buf,
210 size_t count);
211
nct6775_write_temp(struct nct6775_data * data,u16 reg,u16 value)212 static inline int nct6775_write_temp(struct nct6775_data *data, u16 reg, u16 value)
213 {
214 if (!nct6775_reg_is_word_sized(data, reg))
215 value >>= 8;
216 return nct6775_write_value(data, reg, value);
217 }
218
nct6775_attr_mode(struct nct6775_data * data,struct attribute * attr)219 static inline umode_t nct6775_attr_mode(struct nct6775_data *data, struct attribute *attr)
220 {
221 return data->read_only ? (attr->mode & ~0222) : attr->mode;
222 }
223
224 static inline int
nct6775_add_attr_group(struct nct6775_data * data,const struct attribute_group * group)225 nct6775_add_attr_group(struct nct6775_data *data, const struct attribute_group *group)
226 {
227 /* Need to leave a NULL terminator at the end of data->groups */
228 if (data->num_groups == ARRAY_SIZE(data->groups) - 1)
229 return -ENOBUFS;
230
231 data->groups[data->num_groups++] = group;
232 return 0;
233 }
234
235 #define NCT6775_REG_BANK 0x4E
236 #define NCT6775_REG_CONFIG 0x40
237
238 #define NCT6775_REG_FANDIV1 0x506
239 #define NCT6775_REG_FANDIV2 0x507
240
241 #define NCT6791_REG_HM_IO_SPACE_LOCK_ENABLE 0x28
242
243 /*
244 * ALARM_BITS and BEEP_BITS store bit-index for the mask of the registers
245 * loaded into data->alarm and data->beep.
246 *
247 * Every input register (IN/TEMP/FAN) must have a corresponding
248 * ALARM/BEEP bit at the same index BITS[BASE + index]
249 * Set value to -1 to disable the visibility of that '*_alarm' attribute and
250 * to pad the bits until the next BASE
251 *
252 * Beep has an additional GLOBAL_BEEP_ENABLE bit
253 */
254 #define VIN_ALARM_BASE 0
255 #define FAN_ALARM_BASE 24
256 #define TEMP_ALARM_BASE 36
257 #define INTRUSION_ALARM_BASE 48
258 #define BEEP_ENABLE_BASE 50
259
260 #define NUM_ALARM_BITS (INTRUSION_ALARM_BASE + 4)
261 #define NUM_BEEP_BITS (BEEP_ENABLE_BASE + 1)
262
263 /*
264 * Not currently used:
265 * REG_MAN_ID has the value 0x5ca3 for all supported chips.
266 * REG_CHIP_ID == 0x88/0xa1/0xc1 depending on chip model.
267 * REG_MAN_ID is at port 0x4f
268 * REG_CHIP_ID is at port 0x58
269 */
270
271 #endif /* __HWMON_NCT6775_H__ */
272
