1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*
3  * linux/mdio.h: definitions for MDIO (clause 45) transceivers
4  * Copyright 2006-2009 Solarflare Communications Inc.
5  */
6 #ifndef __LINUX_MDIO_H__
7 #define __LINUX_MDIO_H__
8 
9 #include <uapi/linux/mdio.h>
10 #include <linux/mod_devicetable.h>
11 
12 struct gpio_desc;
13 struct mii_bus;
14 
15 /* Multiple levels of nesting are possible. However typically this is
16  * limited to nested DSA like layer, a MUX layer, and the normal
17  * user. Instead of trying to handle the general case, just define
18  * these cases.
19  */
20 enum mdio_mutex_lock_class {
21 	MDIO_MUTEX_NORMAL,
22 	MDIO_MUTEX_MUX,
23 	MDIO_MUTEX_NESTED,
24 };
25 
26 struct mdio_device {
27 	struct device dev;
28 
29 	struct mii_bus *bus;
30 	char modalias[MDIO_NAME_SIZE];
31 
32 	int (*bus_match)(struct device *dev, struct device_driver *drv);
33 	void (*device_free)(struct mdio_device *mdiodev);
34 	void (*device_remove)(struct mdio_device *mdiodev);
35 
36 	/* Bus address of the MDIO device (0-31) */
37 	int addr;
38 	int flags;
39 	struct gpio_desc *reset_gpio;
40 	struct reset_control *reset_ctrl;
41 	unsigned int reset_assert_delay;
42 	unsigned int reset_deassert_delay;
43 };
44 #define to_mdio_device(d) container_of(d, struct mdio_device, dev)
45 
46 /* struct mdio_driver_common: Common to all MDIO drivers */
47 struct mdio_driver_common {
48 	struct device_driver driver;
49 	int flags;
50 };
51 #define MDIO_DEVICE_FLAG_PHY		1
52 #define to_mdio_common_driver(d) \
53 	container_of(d, struct mdio_driver_common, driver)
54 
55 /* struct mdio_driver: Generic MDIO driver */
56 struct mdio_driver {
57 	struct mdio_driver_common mdiodrv;
58 
59 	/*
60 	 * Called during discovery.  Used to set
61 	 * up device-specific structures, if any
62 	 */
63 	int (*probe)(struct mdio_device *mdiodev);
64 
65 	/* Clears up any memory if needed */
66 	void (*remove)(struct mdio_device *mdiodev);
67 };
68 #define to_mdio_driver(d)						\
69 	container_of(to_mdio_common_driver(d), struct mdio_driver, mdiodrv)
70 
71 /* device driver data */
mdiodev_set_drvdata(struct mdio_device * mdio,void * data)72 static inline void mdiodev_set_drvdata(struct mdio_device *mdio, void *data)
73 {
74 	dev_set_drvdata(&mdio->dev, data);
75 }
76 
mdiodev_get_drvdata(struct mdio_device * mdio)77 static inline void *mdiodev_get_drvdata(struct mdio_device *mdio)
78 {
79 	return dev_get_drvdata(&mdio->dev);
80 }
81 
82 void mdio_device_free(struct mdio_device *mdiodev);
83 struct mdio_device *mdio_device_create(struct mii_bus *bus, int addr);
84 int mdio_device_register(struct mdio_device *mdiodev);
85 void mdio_device_remove(struct mdio_device *mdiodev);
86 void mdio_device_reset(struct mdio_device *mdiodev, int value);
87 int mdio_driver_register(struct mdio_driver *drv);
88 void mdio_driver_unregister(struct mdio_driver *drv);
89 int mdio_device_bus_match(struct device *dev, struct device_driver *drv);
90 
mdio_phy_id_is_c45(int phy_id)91 static inline bool mdio_phy_id_is_c45(int phy_id)
92 {
93 	return (phy_id & MDIO_PHY_ID_C45) && !(phy_id & ~MDIO_PHY_ID_C45_MASK);
94 }
95 
mdio_phy_id_prtad(int phy_id)96 static inline __u16 mdio_phy_id_prtad(int phy_id)
97 {
98 	return (phy_id & MDIO_PHY_ID_PRTAD) >> 5;
99 }
100 
mdio_phy_id_devad(int phy_id)101 static inline __u16 mdio_phy_id_devad(int phy_id)
102 {
103 	return phy_id & MDIO_PHY_ID_DEVAD;
104 }
105 
106 /**
107  * struct mdio_if_info - Ethernet controller MDIO interface
108  * @prtad: PRTAD of the PHY (%MDIO_PRTAD_NONE if not present/unknown)
109  * @mmds: Mask of MMDs expected to be present in the PHY.  This must be
110  *	non-zero unless @prtad = %MDIO_PRTAD_NONE.
111  * @mode_support: MDIO modes supported.  If %MDIO_SUPPORTS_C22 is set then
112  *	MII register access will be passed through with @devad =
113  *	%MDIO_DEVAD_NONE.  If %MDIO_EMULATE_C22 is set then access to
114  *	commonly used clause 22 registers will be translated into
115  *	clause 45 registers.
116  * @dev: Net device structure
117  * @mdio_read: Register read function; returns value or negative error code
118  * @mdio_write: Register write function; returns 0 or negative error code
119  */
120 struct mdio_if_info {
121 	int prtad;
122 	u32 mmds;
123 	unsigned mode_support;
124 
125 	struct net_device *dev;
126 	int (*mdio_read)(struct net_device *dev, int prtad, int devad,
127 			 u16 addr);
128 	int (*mdio_write)(struct net_device *dev, int prtad, int devad,
129 			  u16 addr, u16 val);
130 };
131 
132 #define MDIO_PRTAD_NONE			(-1)
133 #define MDIO_DEVAD_NONE			(-1)
134 #define MDIO_SUPPORTS_C22		1
135 #define MDIO_SUPPORTS_C45		2
136 #define MDIO_EMULATE_C22		4
137 
138 struct ethtool_cmd;
139 struct ethtool_pauseparam;
140 extern int mdio45_probe(struct mdio_if_info *mdio, int prtad);
141 extern int mdio_set_flag(const struct mdio_if_info *mdio,
142 			 int prtad, int devad, u16 addr, int mask,
143 			 bool sense);
144 extern int mdio45_links_ok(const struct mdio_if_info *mdio, u32 mmds);
145 extern int mdio45_nway_restart(const struct mdio_if_info *mdio);
146 extern void mdio45_ethtool_gset_npage(const struct mdio_if_info *mdio,
147 				      struct ethtool_cmd *ecmd,
148 				      u32 npage_adv, u32 npage_lpa);
149 extern void
150 mdio45_ethtool_ksettings_get_npage(const struct mdio_if_info *mdio,
151 				   struct ethtool_link_ksettings *cmd,
152 				   u32 npage_adv, u32 npage_lpa);
153 
154 /**
155  * mdio45_ethtool_gset - get settings for ETHTOOL_GSET
156  * @mdio: MDIO interface
157  * @ecmd: Ethtool request structure
158  *
159  * Since the CSRs for auto-negotiation using next pages are not fully
160  * standardised, this function does not attempt to decode them.  Use
161  * mdio45_ethtool_gset_npage() to specify advertisement bits from next
162  * pages.
163  */
mdio45_ethtool_gset(const struct mdio_if_info * mdio,struct ethtool_cmd * ecmd)164 static inline void mdio45_ethtool_gset(const struct mdio_if_info *mdio,
165 				       struct ethtool_cmd *ecmd)
166 {
167 	mdio45_ethtool_gset_npage(mdio, ecmd, 0, 0);
168 }
169 
170 /**
171  * mdio45_ethtool_ksettings_get - get settings for ETHTOOL_GLINKSETTINGS
172  * @mdio: MDIO interface
173  * @cmd: Ethtool request structure
174  *
175  * Since the CSRs for auto-negotiation using next pages are not fully
176  * standardised, this function does not attempt to decode them.  Use
177  * mdio45_ethtool_ksettings_get_npage() to specify advertisement bits
178  * from next pages.
179  */
180 static inline void
mdio45_ethtool_ksettings_get(const struct mdio_if_info * mdio,struct ethtool_link_ksettings * cmd)181 mdio45_ethtool_ksettings_get(const struct mdio_if_info *mdio,
182 			     struct ethtool_link_ksettings *cmd)
183 {
184 	mdio45_ethtool_ksettings_get_npage(mdio, cmd, 0, 0);
185 }
186 
187 extern int mdio_mii_ioctl(const struct mdio_if_info *mdio,
188 			  struct mii_ioctl_data *mii_data, int cmd);
189 
190 /**
191  * mmd_eee_cap_to_ethtool_sup_t
192  * @eee_cap: value of the MMD EEE Capability register
193  *
194  * A small helper function that translates MMD EEE Capability (3.20) bits
195  * to ethtool supported settings.
196  */
mmd_eee_cap_to_ethtool_sup_t(u16 eee_cap)197 static inline u32 mmd_eee_cap_to_ethtool_sup_t(u16 eee_cap)
198 {
199 	u32 supported = 0;
200 
201 	if (eee_cap & MDIO_EEE_100TX)
202 		supported |= SUPPORTED_100baseT_Full;
203 	if (eee_cap & MDIO_EEE_1000T)
204 		supported |= SUPPORTED_1000baseT_Full;
205 	if (eee_cap & MDIO_EEE_10GT)
206 		supported |= SUPPORTED_10000baseT_Full;
207 	if (eee_cap & MDIO_EEE_1000KX)
208 		supported |= SUPPORTED_1000baseKX_Full;
209 	if (eee_cap & MDIO_EEE_10GKX4)
210 		supported |= SUPPORTED_10000baseKX4_Full;
211 	if (eee_cap & MDIO_EEE_10GKR)
212 		supported |= SUPPORTED_10000baseKR_Full;
213 
214 	return supported;
215 }
216 
217 /**
218  * mmd_eee_adv_to_ethtool_adv_t
219  * @eee_adv: value of the MMD EEE Advertisement/Link Partner Ability registers
220  *
221  * A small helper function that translates the MMD EEE Advertisment (7.60)
222  * and MMD EEE Link Partner Ability (7.61) bits to ethtool advertisement
223  * settings.
224  */
mmd_eee_adv_to_ethtool_adv_t(u16 eee_adv)225 static inline u32 mmd_eee_adv_to_ethtool_adv_t(u16 eee_adv)
226 {
227 	u32 adv = 0;
228 
229 	if (eee_adv & MDIO_EEE_100TX)
230 		adv |= ADVERTISED_100baseT_Full;
231 	if (eee_adv & MDIO_EEE_1000T)
232 		adv |= ADVERTISED_1000baseT_Full;
233 	if (eee_adv & MDIO_EEE_10GT)
234 		adv |= ADVERTISED_10000baseT_Full;
235 	if (eee_adv & MDIO_EEE_1000KX)
236 		adv |= ADVERTISED_1000baseKX_Full;
237 	if (eee_adv & MDIO_EEE_10GKX4)
238 		adv |= ADVERTISED_10000baseKX4_Full;
239 	if (eee_adv & MDIO_EEE_10GKR)
240 		adv |= ADVERTISED_10000baseKR_Full;
241 
242 	return adv;
243 }
244 
245 /**
246  * ethtool_adv_to_mmd_eee_adv_t
247  * @adv: the ethtool advertisement settings
248  *
249  * A small helper function that translates ethtool advertisement settings
250  * to EEE advertisements for the MMD EEE Advertisement (7.60) and
251  * MMD EEE Link Partner Ability (7.61) registers.
252  */
ethtool_adv_to_mmd_eee_adv_t(u32 adv)253 static inline u16 ethtool_adv_to_mmd_eee_adv_t(u32 adv)
254 {
255 	u16 reg = 0;
256 
257 	if (adv & ADVERTISED_100baseT_Full)
258 		reg |= MDIO_EEE_100TX;
259 	if (adv & ADVERTISED_1000baseT_Full)
260 		reg |= MDIO_EEE_1000T;
261 	if (adv & ADVERTISED_10000baseT_Full)
262 		reg |= MDIO_EEE_10GT;
263 	if (adv & ADVERTISED_1000baseKX_Full)
264 		reg |= MDIO_EEE_1000KX;
265 	if (adv & ADVERTISED_10000baseKX4_Full)
266 		reg |= MDIO_EEE_10GKX4;
267 	if (adv & ADVERTISED_10000baseKR_Full)
268 		reg |= MDIO_EEE_10GKR;
269 
270 	return reg;
271 }
272 
273 /**
274  * linkmode_adv_to_mii_10gbt_adv_t
275  * @advertising: the linkmode advertisement settings
276  *
277  * A small helper function that translates linkmode advertisement
278  * settings to phy autonegotiation advertisements for the C45
279  * 10GBASE-T AN CONTROL (7.32) register.
280  */
linkmode_adv_to_mii_10gbt_adv_t(unsigned long * advertising)281 static inline u32 linkmode_adv_to_mii_10gbt_adv_t(unsigned long *advertising)
282 {
283 	u32 result = 0;
284 
285 	if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
286 			      advertising))
287 		result |= MDIO_AN_10GBT_CTRL_ADV2_5G;
288 	if (linkmode_test_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
289 			      advertising))
290 		result |= MDIO_AN_10GBT_CTRL_ADV5G;
291 	if (linkmode_test_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
292 			      advertising))
293 		result |= MDIO_AN_10GBT_CTRL_ADV10G;
294 
295 	return result;
296 }
297 
298 /**
299  * mii_10gbt_stat_mod_linkmode_lpa_t
300  * @advertising: target the linkmode advertisement settings
301  * @adv: value of the C45 10GBASE-T AN STATUS register
302  *
303  * A small helper function that translates C45 10GBASE-T AN STATUS register bits
304  * to linkmode advertisement settings. Other bits in advertising aren't changed.
305  */
mii_10gbt_stat_mod_linkmode_lpa_t(unsigned long * advertising,u32 lpa)306 static inline void mii_10gbt_stat_mod_linkmode_lpa_t(unsigned long *advertising,
307 						     u32 lpa)
308 {
309 	linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
310 			 advertising, lpa & MDIO_AN_10GBT_STAT_LP2_5G);
311 	linkmode_mod_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
312 			 advertising, lpa & MDIO_AN_10GBT_STAT_LP5G);
313 	linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
314 			 advertising, lpa & MDIO_AN_10GBT_STAT_LP10G);
315 }
316 
317 int __mdiobus_read(struct mii_bus *bus, int addr, u32 regnum);
318 int __mdiobus_write(struct mii_bus *bus, int addr, u32 regnum, u16 val);
319 
320 int mdiobus_read(struct mii_bus *bus, int addr, u32 regnum);
321 int mdiobus_read_nested(struct mii_bus *bus, int addr, u32 regnum);
322 int mdiobus_write(struct mii_bus *bus, int addr, u32 regnum, u16 val);
323 int mdiobus_write_nested(struct mii_bus *bus, int addr, u32 regnum, u16 val);
324 
325 int mdiobus_register_device(struct mdio_device *mdiodev);
326 int mdiobus_unregister_device(struct mdio_device *mdiodev);
327 bool mdiobus_is_registered_device(struct mii_bus *bus, int addr);
328 struct phy_device *mdiobus_get_phy(struct mii_bus *bus, int addr);
329 
330 /**
331  * mdio_module_driver() - Helper macro for registering mdio drivers
332  *
333  * Helper macro for MDIO drivers which do not do anything special in module
334  * init/exit. Each module may only use this macro once, and calling it
335  * replaces module_init() and module_exit().
336  */
337 #define mdio_module_driver(_mdio_driver)				\
338 static int __init mdio_module_init(void)				\
339 {									\
340 	return mdio_driver_register(&_mdio_driver);			\
341 }									\
342 module_init(mdio_module_init);						\
343 static void __exit mdio_module_exit(void)				\
344 {									\
345 	mdio_driver_unregister(&_mdio_driver);				\
346 }									\
347 module_exit(mdio_module_exit)
348 
349 #endif /* __LINUX_MDIO_H__ */
350