1 /* 2 * 3 * 4 * Copyright (C) 2005 Mike Isely <isely@pobox.com> 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License as published by 8 * the Free Software Foundation; either version 2 of the License 9 * 10 * This program is distributed in the hope that it will be useful, 11 * but WITHOUT ANY WARRANTY; without even the implied warranty of 12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13 * GNU General Public License for more details. 14 * 15 */ 16 #ifndef __PVRUSB2_HDW_INTERNAL_H 17 #define __PVRUSB2_HDW_INTERNAL_H 18 19 /* 20 21 This header sets up all the internal structures and definitions needed to 22 track and coordinate the driver's interaction with the hardware. ONLY 23 source files which actually implement part of that whole circus should be 24 including this header. Higher levels, like the external layers to the 25 various public APIs (V4L, sysfs, etc) should NOT ever include this 26 private, internal header. This means that pvrusb2-hdw, pvrusb2-encoder, 27 etc will include this, but pvrusb2-v4l should not. 28 29 */ 30 31 #include <linux/videodev2.h> 32 #include <linux/i2c.h> 33 #include <linux/workqueue.h> 34 #include <linux/mutex.h> 35 #include "pvrusb2-hdw.h" 36 #include "pvrusb2-io.h" 37 #include <media/v4l2-device.h> 38 #include <media/drv-intf/cx2341x.h> 39 #include <media/i2c/ir-kbd-i2c.h> 40 #include "pvrusb2-devattr.h" 41 42 /* Legal values for PVR2_CID_HSM */ 43 #define PVR2_CVAL_HSM_FAIL 0 44 #define PVR2_CVAL_HSM_FULL 1 45 #define PVR2_CVAL_HSM_HIGH 2 46 47 #define PVR2_VID_ENDPOINT 0x84 48 #define PVR2_UNK_ENDPOINT 0x86 /* maybe raw yuv ? */ 49 #define PVR2_VBI_ENDPOINT 0x88 50 51 #define PVR2_CTL_BUFFSIZE 64 52 53 #define FREQTABLE_SIZE 500 54 55 #define LOCK_TAKE(x) do { mutex_lock(&x##_mutex); x##_held = !0; } while (0) 56 #define LOCK_GIVE(x) do { x##_held = 0; mutex_unlock(&x##_mutex); } while (0) 57 58 typedef int (*pvr2_ctlf_is_dirty)(struct pvr2_ctrl *); 59 typedef void (*pvr2_ctlf_clear_dirty)(struct pvr2_ctrl *); 60 typedef int (*pvr2_ctlf_check_value)(struct pvr2_ctrl *,int); 61 typedef int (*pvr2_ctlf_get_value)(struct pvr2_ctrl *,int *); 62 typedef int (*pvr2_ctlf_set_value)(struct pvr2_ctrl *,int msk,int val); 63 typedef int (*pvr2_ctlf_val_to_sym)(struct pvr2_ctrl *,int msk,int val, 64 char *,unsigned int,unsigned int *); 65 typedef int (*pvr2_ctlf_sym_to_val)(struct pvr2_ctrl *, 66 const char *,unsigned int, 67 int *mskp,int *valp); 68 typedef unsigned int (*pvr2_ctlf_get_v4lflags)(struct pvr2_ctrl *); 69 70 /* This structure describes a specific control. A table of these is set up 71 in pvrusb2-hdw.c. */ 72 struct pvr2_ctl_info { 73 /* Control's name suitable for use as an identifier */ 74 const char *name; 75 76 /* Short description of control */ 77 const char *desc; 78 79 /* Control's implementation */ 80 pvr2_ctlf_get_value get_value; /* Get its value */ 81 pvr2_ctlf_get_value get_def_value; /* Get its default value */ 82 pvr2_ctlf_get_value get_min_value; /* Get minimum allowed value */ 83 pvr2_ctlf_get_value get_max_value; /* Get maximum allowed value */ 84 pvr2_ctlf_set_value set_value; /* Set its value */ 85 pvr2_ctlf_check_value check_value; /* Check that value is valid */ 86 pvr2_ctlf_val_to_sym val_to_sym; /* Custom convert value->symbol */ 87 pvr2_ctlf_sym_to_val sym_to_val; /* Custom convert symbol->value */ 88 pvr2_ctlf_is_dirty is_dirty; /* Return true if dirty */ 89 pvr2_ctlf_clear_dirty clear_dirty; /* Clear dirty state */ 90 pvr2_ctlf_get_v4lflags get_v4lflags;/* Retrieve v4l flags */ 91 92 /* Control's type (int, enum, bitmask) */ 93 enum pvr2_ctl_type type; 94 95 /* Associated V4L control ID, if any */ 96 int v4l_id; 97 98 /* Associated driver internal ID, if any */ 99 int internal_id; 100 101 /* Don't implicitly initialize this control's value */ 102 int skip_init; 103 104 /* Starting value for this control */ 105 int default_value; 106 107 /* Type-specific control information */ 108 union { 109 struct { /* Integer control */ 110 long min_value; /* lower limit */ 111 long max_value; /* upper limit */ 112 } type_int; 113 struct { /* enumerated control */ 114 unsigned int count; /* enum value count */ 115 const char * const *value_names; /* symbol names */ 116 } type_enum; 117 struct { /* bitmask control */ 118 unsigned int valid_bits; /* bits in use */ 119 const char **bit_names; /* symbol name/bit */ 120 } type_bitmask; 121 } def; 122 }; 123 124 125 /* Same as pvr2_ctl_info, but includes storage for the control description */ 126 #define PVR2_CTLD_INFO_DESC_SIZE 32 127 struct pvr2_ctld_info { 128 struct pvr2_ctl_info info; 129 char desc[PVR2_CTLD_INFO_DESC_SIZE]; 130 }; 131 132 struct pvr2_ctrl { 133 const struct pvr2_ctl_info *info; 134 struct pvr2_hdw *hdw; 135 }; 136 137 138 139 /* Disposition of firmware1 loading situation */ 140 #define FW1_STATE_UNKNOWN 0 141 #define FW1_STATE_MISSING 1 142 #define FW1_STATE_FAILED 2 143 #define FW1_STATE_RELOAD 3 144 #define FW1_STATE_OK 4 145 146 /* What state the device is in if it is a hybrid */ 147 #define PVR2_PATHWAY_UNKNOWN 0 148 #define PVR2_PATHWAY_ANALOG 1 149 #define PVR2_PATHWAY_DIGITAL 2 150 151 typedef int (*pvr2_i2c_func)(struct pvr2_hdw *,u8,u8 *,u16,u8 *, u16); 152 #define PVR2_I2C_FUNC_CNT 128 153 154 /* This structure contains all state data directly needed to 155 manipulate the hardware (as opposed to complying with a kernel 156 interface) */ 157 struct pvr2_hdw { 158 /* Underlying USB device handle */ 159 struct usb_device *usb_dev; 160 struct usb_interface *usb_intf; 161 162 /* Our handle into the v4l2 sub-device architecture */ 163 struct v4l2_device v4l2_dev; 164 /* Device description, anything that must adjust behavior based on 165 device specific info will use information held here. */ 166 const struct pvr2_device_desc *hdw_desc; 167 168 /* Kernel worker thread handling */ 169 struct work_struct workpoll; /* Update driver state */ 170 171 /* Video spigot */ 172 struct pvr2_stream *vid_stream; 173 174 /* Mutex for all hardware state control */ 175 struct mutex big_lock_mutex; 176 int big_lock_held; /* For debugging */ 177 178 /* This is a simple string which identifies the instance of this 179 driver. It is unique within the set of existing devices, but 180 there is no attempt to keep the name consistent with the same 181 physical device each time. */ 182 char name[32]; 183 184 /* This is a simple string which identifies the physical device 185 instance itself - if possible. (If not possible, then it is 186 based on the specific driver instance, similar to name above.) 187 The idea here is that userspace might hopefully be able to use 188 this recognize specific tuners. It will encode a serial number, 189 if available. */ 190 char identifier[32]; 191 192 /* I2C stuff */ 193 struct i2c_adapter i2c_adap; 194 struct i2c_algorithm i2c_algo; 195 pvr2_i2c_func i2c_func[PVR2_I2C_FUNC_CNT]; 196 int i2c_cx25840_hack_state; 197 int i2c_linked; 198 199 /* IR related */ 200 unsigned int ir_scheme_active; /* IR scheme as seen from the outside */ 201 struct IR_i2c_init_data ir_init_data; /* params passed to IR modules */ 202 203 /* Frequency table */ 204 unsigned int freqTable[FREQTABLE_SIZE]; 205 unsigned int freqProgSlot; 206 207 /* Stuff for handling low level control interaction with device */ 208 struct mutex ctl_lock_mutex; 209 int ctl_lock_held; /* For debugging */ 210 struct urb *ctl_write_urb; 211 struct urb *ctl_read_urb; 212 unsigned char *ctl_write_buffer; 213 unsigned char *ctl_read_buffer; 214 int ctl_write_pend_flag; 215 int ctl_read_pend_flag; 216 int ctl_timeout_flag; 217 struct completion ctl_done; 218 unsigned char cmd_buffer[PVR2_CTL_BUFFSIZE]; 219 int cmd_debug_state; // Low level command debugging info 220 unsigned char cmd_debug_code; // 221 unsigned int cmd_debug_write_len; // 222 unsigned int cmd_debug_read_len; // 223 224 /* Bits of state that describe what is going on with various parts 225 of the driver. */ 226 int state_pathway_ok; /* Pathway config is ok */ 227 int state_encoder_ok; /* Encoder is operational */ 228 int state_encoder_run; /* Encoder is running */ 229 int state_encoder_config; /* Encoder is configured */ 230 int state_encoder_waitok; /* Encoder pre-wait done */ 231 int state_encoder_runok; /* Encoder has run for >= .25 sec */ 232 int state_decoder_run; /* Decoder is running */ 233 int state_decoder_ready; /* Decoder is stabilized & streamable */ 234 int state_usbstream_run; /* FX2 is streaming */ 235 int state_decoder_quiescent; /* Decoder idle for minimal interval */ 236 int state_pipeline_config; /* Pipeline is configured */ 237 int state_pipeline_req; /* Somebody wants to stream */ 238 int state_pipeline_pause; /* Pipeline must be paused */ 239 int state_pipeline_idle; /* Pipeline not running */ 240 241 /* This is the master state of the driver. It is the combined 242 result of other bits of state. Examining this will indicate the 243 overall state of the driver. Values here are one of 244 PVR2_STATE_xxxx */ 245 unsigned int master_state; 246 247 /* True if device led is currently on */ 248 int led_on; 249 250 /* True if states must be re-evaluated */ 251 int state_stale; 252 253 void (*state_func)(void *); 254 void *state_data; 255 256 /* Timer for measuring required decoder settling time before we're 257 allowed to fire it up again. */ 258 struct timer_list quiescent_timer; 259 260 /* Timer for measuring decoder stabilization time, which is the 261 amount of time we need to let the decoder run before we can 262 trust its output (otherwise the encoder might see garbage and 263 then fail to start correctly). */ 264 struct timer_list decoder_stabilization_timer; 265 266 /* Timer for measuring encoder pre-wait time */ 267 struct timer_list encoder_wait_timer; 268 269 /* Timer for measuring encoder minimum run time */ 270 struct timer_list encoder_run_timer; 271 272 /* Place to block while waiting for state changes */ 273 wait_queue_head_t state_wait_data; 274 275 276 int force_dirty; /* consider all controls dirty if true */ 277 int flag_ok; /* device in known good state */ 278 int flag_modulefail; /* true if at least one module failed to load */ 279 int flag_disconnected; /* flag_ok == 0 due to disconnect */ 280 int flag_init_ok; /* true if structure is fully initialized */ 281 int fw1_state; /* current situation with fw1 */ 282 int pathway_state; /* one of PVR2_PATHWAY_xxx */ 283 int flag_decoder_missed;/* We've noticed missing decoder */ 284 int flag_tripped; /* Indicates overall failure to start */ 285 286 unsigned int decoder_client_id; 287 288 // CPU firmware info (used to help find / save firmware data) 289 char *fw_buffer; 290 unsigned int fw_size; 291 int fw_cpu_flag; /* True if we are dealing with the CPU */ 292 293 /* Tuner / frequency control stuff */ 294 unsigned int tuner_type; 295 int tuner_updated; 296 unsigned int freqValTelevision; /* Current freq for tv mode */ 297 unsigned int freqValRadio; /* Current freq for radio mode */ 298 unsigned int freqSlotTelevision; /* Current slot for tv mode */ 299 unsigned int freqSlotRadio; /* Current slot for radio mode */ 300 unsigned int freqSelector; /* 0=radio 1=television */ 301 int freqDirty; 302 303 /* Current tuner info - this information is polled from the I2C bus */ 304 struct v4l2_tuner tuner_signal_info; 305 int tuner_signal_stale; 306 307 /* Cropping capability info */ 308 struct v4l2_cropcap cropcap_info; 309 int cropcap_stale; 310 311 /* Video standard handling */ 312 v4l2_std_id std_mask_eeprom; // Hardware supported selections 313 v4l2_std_id std_mask_avail; // Which standards we may select from 314 v4l2_std_id std_mask_cur; // Currently selected standard(s) 315 int std_enum_cur; // selected standard enumeration value 316 int std_dirty; // True if std_mask_cur has changed 317 struct pvr2_ctl_info std_info_enum; 318 struct pvr2_ctl_info std_info_avail; 319 struct pvr2_ctl_info std_info_cur; 320 struct pvr2_ctl_info std_info_detect; 321 322 // Generated string names, one per actual V4L2 standard 323 const char *std_mask_ptrs[32]; 324 char std_mask_names[32][16]; 325 326 int unit_number; /* ID for driver instance */ 327 unsigned long serial_number; /* ID for hardware itself */ 328 329 char bus_info[32]; /* Bus location info */ 330 331 /* Minor numbers used by v4l logic (yes, this is a hack, as there 332 should be no v4l junk here). Probably a better way to do this. */ 333 int v4l_minor_number_video; 334 int v4l_minor_number_vbi; 335 int v4l_minor_number_radio; 336 337 /* Bit mask of PVR2_CVAL_INPUT choices which are valid for the hardware */ 338 unsigned int input_avail_mask; 339 /* Bit mask of PVR2_CVAL_INPUT choices which are currently allowed */ 340 unsigned int input_allowed_mask; 341 342 /* Location of eeprom or a negative number if none */ 343 int eeprom_addr; 344 345 enum pvr2_config active_stream_type; 346 enum pvr2_config desired_stream_type; 347 348 /* Control state needed for cx2341x module */ 349 struct cx2341x_mpeg_params enc_cur_state; 350 struct cx2341x_mpeg_params enc_ctl_state; 351 /* True if an encoder attribute has changed */ 352 int enc_stale; 353 /* True if an unsafe encoder attribute has changed */ 354 int enc_unsafe_stale; 355 /* True if enc_cur_state is valid */ 356 int enc_cur_valid; 357 358 /* Control state */ 359 #define VCREATE_DATA(lab) int lab##_val; int lab##_dirty 360 VCREATE_DATA(brightness); 361 VCREATE_DATA(contrast); 362 VCREATE_DATA(saturation); 363 VCREATE_DATA(hue); 364 VCREATE_DATA(volume); 365 VCREATE_DATA(balance); 366 VCREATE_DATA(bass); 367 VCREATE_DATA(treble); 368 VCREATE_DATA(mute); 369 VCREATE_DATA(cropl); 370 VCREATE_DATA(cropt); 371 VCREATE_DATA(cropw); 372 VCREATE_DATA(croph); 373 VCREATE_DATA(input); 374 VCREATE_DATA(audiomode); 375 VCREATE_DATA(res_hor); 376 VCREATE_DATA(res_ver); 377 VCREATE_DATA(srate); 378 #undef VCREATE_DATA 379 380 struct pvr2_ctld_info *mpeg_ctrl_info; 381 382 struct pvr2_ctrl *controls; 383 unsigned int control_cnt; 384 }; 385 386 /* This function gets the current frequency */ 387 unsigned long pvr2_hdw_get_cur_freq(struct pvr2_hdw *); 388 389 void pvr2_hdw_status_poll(struct pvr2_hdw *); 390 391 #endif /* __PVRUSB2_HDW_INTERNAL_H */ 392
