1 /* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */ 2 /* 3 * 4 * This file is provided under a dual BSD/GPLv2 license. When using or 5 * redistributing this file, you may do so under either license. 6 * 7 * GPL LICENSE SUMMARY 8 * 9 * Copyright(c) 2015 - 2018 Intel Corporation. 10 * 11 * This program is free software; you can redistribute it and/or modify 12 * it under the terms of version 2 of the GNU General Public License as 13 * published by the Free Software Foundation. 14 * 15 * This program is distributed in the hope that it will be useful, but 16 * WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 18 * General Public License for more details. 19 * 20 * BSD LICENSE 21 * 22 * Copyright(c) 2015 Intel Corporation. 23 * 24 * Redistribution and use in source and binary forms, with or without 25 * modification, are permitted provided that the following conditions 26 * are met: 27 * 28 * - Redistributions of source code must retain the above copyright 29 * notice, this list of conditions and the following disclaimer. 30 * - Redistributions in binary form must reproduce the above copyright 31 * notice, this list of conditions and the following disclaimer in 32 * the documentation and/or other materials provided with the 33 * distribution. 34 * - Neither the name of Intel Corporation nor the names of its 35 * contributors may be used to endorse or promote products derived 36 * from this software without specific prior written permission. 37 * 38 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 39 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 40 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 41 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 42 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 43 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 44 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 45 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 46 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 47 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 48 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 49 * 50 */ 51 52 /* 53 * This file contains defines, structures, etc. that are used 54 * to communicate between kernel and user code. 55 */ 56 57 #ifndef _LINUX__HFI1_USER_H 58 #define _LINUX__HFI1_USER_H 59 60 #include <linux/types.h> 61 #include <rdma/rdma_user_ioctl.h> 62 63 /* 64 * This version number is given to the driver by the user code during 65 * initialization in the spu_userversion field of hfi1_user_info, so 66 * the driver can check for compatibility with user code. 67 * 68 * The major version changes when data structures change in an incompatible 69 * way. The driver must be the same for initialization to succeed. 70 */ 71 #define HFI1_USER_SWMAJOR 6 72 73 /* 74 * Minor version differences are always compatible 75 * a within a major version, however if user software is larger 76 * than driver software, some new features and/or structure fields 77 * may not be implemented; the user code must deal with this if it 78 * cares, or it must abort after initialization reports the difference. 79 */ 80 #define HFI1_USER_SWMINOR 3 81 82 /* 83 * We will encode the major/minor inside a single 32bit version number. 84 */ 85 #define HFI1_SWMAJOR_SHIFT 16 86 87 /* 88 * Set of HW and driver capability/feature bits. 89 * These bit values are used to configure enabled/disabled HW and 90 * driver features. The same set of bits are communicated to user 91 * space. 92 */ 93 #define HFI1_CAP_DMA_RTAIL (1UL << 0) /* Use DMA'ed RTail value */ 94 #define HFI1_CAP_SDMA (1UL << 1) /* Enable SDMA support */ 95 #define HFI1_CAP_SDMA_AHG (1UL << 2) /* Enable SDMA AHG support */ 96 #define HFI1_CAP_EXTENDED_PSN (1UL << 3) /* Enable Extended PSN support */ 97 #define HFI1_CAP_HDRSUPP (1UL << 4) /* Enable Header Suppression */ 98 #define HFI1_CAP_TID_RDMA (1UL << 5) /* Enable TID RDMA operations */ 99 #define HFI1_CAP_USE_SDMA_HEAD (1UL << 6) /* DMA Hdr Q tail vs. use CSR */ 100 #define HFI1_CAP_MULTI_PKT_EGR (1UL << 7) /* Enable multi-packet Egr buffs*/ 101 #define HFI1_CAP_NODROP_RHQ_FULL (1UL << 8) /* Don't drop on Hdr Q full */ 102 #define HFI1_CAP_NODROP_EGR_FULL (1UL << 9) /* Don't drop on EGR buffs full */ 103 #define HFI1_CAP_TID_UNMAP (1UL << 10) /* Disable Expected TID caching */ 104 #define HFI1_CAP_PRINT_UNIMPL (1UL << 11) /* Show for unimplemented feats */ 105 #define HFI1_CAP_ALLOW_PERM_JKEY (1UL << 12) /* Allow use of permissive JKEY */ 106 #define HFI1_CAP_NO_INTEGRITY (1UL << 13) /* Enable ctxt integrity checks */ 107 #define HFI1_CAP_PKEY_CHECK (1UL << 14) /* Enable ctxt PKey checking */ 108 #define HFI1_CAP_STATIC_RATE_CTRL (1UL << 15) /* Allow PBC.StaticRateControl */ 109 #define HFI1_CAP_OPFN (1UL << 16) /* Enable the OPFN protocol */ 110 #define HFI1_CAP_SDMA_HEAD_CHECK (1UL << 17) /* SDMA head checking */ 111 #define HFI1_CAP_EARLY_CREDIT_RETURN (1UL << 18) /* early credit return */ 112 113 #define HFI1_RCVHDR_ENTSIZE_2 (1UL << 0) 114 #define HFI1_RCVHDR_ENTSIZE_16 (1UL << 1) 115 #define HFI1_RCVDHR_ENTSIZE_32 (1UL << 2) 116 117 #define _HFI1_EVENT_FROZEN_BIT 0 118 #define _HFI1_EVENT_LINKDOWN_BIT 1 119 #define _HFI1_EVENT_LID_CHANGE_BIT 2 120 #define _HFI1_EVENT_LMC_CHANGE_BIT 3 121 #define _HFI1_EVENT_SL2VL_CHANGE_BIT 4 122 #define _HFI1_EVENT_TID_MMU_NOTIFY_BIT 5 123 #define _HFI1_MAX_EVENT_BIT _HFI1_EVENT_TID_MMU_NOTIFY_BIT 124 125 #define HFI1_EVENT_FROZEN (1UL << _HFI1_EVENT_FROZEN_BIT) 126 #define HFI1_EVENT_LINKDOWN (1UL << _HFI1_EVENT_LINKDOWN_BIT) 127 #define HFI1_EVENT_LID_CHANGE (1UL << _HFI1_EVENT_LID_CHANGE_BIT) 128 #define HFI1_EVENT_LMC_CHANGE (1UL << _HFI1_EVENT_LMC_CHANGE_BIT) 129 #define HFI1_EVENT_SL2VL_CHANGE (1UL << _HFI1_EVENT_SL2VL_CHANGE_BIT) 130 #define HFI1_EVENT_TID_MMU_NOTIFY (1UL << _HFI1_EVENT_TID_MMU_NOTIFY_BIT) 131 132 /* 133 * These are the status bits readable (in ASCII form, 64bit value) 134 * from the "status" sysfs file. For binary compatibility, values 135 * must remain as is; removed states can be reused for different 136 * purposes. 137 */ 138 #define HFI1_STATUS_INITTED 0x1 /* basic initialization done */ 139 /* Chip has been found and initialized */ 140 #define HFI1_STATUS_CHIP_PRESENT 0x20 141 /* IB link is at ACTIVE, usable for data traffic */ 142 #define HFI1_STATUS_IB_READY 0x40 143 /* link is configured, LID, MTU, etc. have been set */ 144 #define HFI1_STATUS_IB_CONF 0x80 145 /* A Fatal hardware error has occurred. */ 146 #define HFI1_STATUS_HWERROR 0x200 147 148 /* 149 * Number of supported shared contexts. 150 * This is the maximum number of software contexts that can share 151 * a hardware send/receive context. 152 */ 153 #define HFI1_MAX_SHARED_CTXTS 8 154 155 /* 156 * Poll types 157 */ 158 #define HFI1_POLL_TYPE_ANYRCV 0x0 159 #define HFI1_POLL_TYPE_URGENT 0x1 160 161 enum hfi1_sdma_comp_state { 162 FREE = 0, 163 QUEUED, 164 COMPLETE, 165 ERROR 166 }; 167 168 /* 169 * SDMA completion ring entry 170 */ 171 struct hfi1_sdma_comp_entry { 172 __u32 status; 173 __u32 errcode; 174 }; 175 176 /* 177 * Device status and notifications from driver to user-space. 178 */ 179 struct hfi1_status { 180 __aligned_u64 dev; /* device/hw status bits */ 181 __aligned_u64 port; /* port state and status bits */ 182 char freezemsg[0]; 183 }; 184 185 enum sdma_req_opcode { 186 EXPECTED = 0, 187 EAGER 188 }; 189 190 #define HFI1_SDMA_REQ_VERSION_MASK 0xF 191 #define HFI1_SDMA_REQ_VERSION_SHIFT 0x0 192 #define HFI1_SDMA_REQ_OPCODE_MASK 0xF 193 #define HFI1_SDMA_REQ_OPCODE_SHIFT 0x4 194 #define HFI1_SDMA_REQ_IOVCNT_MASK 0xFF 195 #define HFI1_SDMA_REQ_IOVCNT_SHIFT 0x8 196 197 struct sdma_req_info { 198 /* 199 * bits 0-3 - version (currently unused) 200 * bits 4-7 - opcode (enum sdma_req_opcode) 201 * bits 8-15 - io vector count 202 */ 203 __u16 ctrl; 204 /* 205 * Number of fragments contained in this request. 206 * User-space has already computed how many 207 * fragment-sized packet the user buffer will be 208 * split into. 209 */ 210 __u16 npkts; 211 /* 212 * Size of each fragment the user buffer will be 213 * split into. 214 */ 215 __u16 fragsize; 216 /* 217 * Index of the slot in the SDMA completion ring 218 * this request should be using. User-space is 219 * in charge of managing its own ring. 220 */ 221 __u16 comp_idx; 222 } __attribute__((__packed__)); 223 224 /* 225 * SW KDETH header. 226 * swdata is SW defined portion. 227 */ 228 struct hfi1_kdeth_header { 229 __le32 ver_tid_offset; 230 __le16 jkey; 231 __le16 hcrc; 232 __le32 swdata[7]; 233 } __attribute__((__packed__)); 234 235 /* 236 * Structure describing the headers that User space uses. The 237 * structure above is a subset of this one. 238 */ 239 struct hfi1_pkt_header { 240 __le16 pbc[4]; 241 __be16 lrh[4]; 242 __be32 bth[3]; 243 struct hfi1_kdeth_header kdeth; 244 } __attribute__((__packed__)); 245 246 247 /* 248 * The list of usermode accessible registers. 249 */ 250 enum hfi1_ureg { 251 /* (RO) DMA RcvHdr to be used next. */ 252 ur_rcvhdrtail = 0, 253 /* (RW) RcvHdr entry to be processed next by host. */ 254 ur_rcvhdrhead = 1, 255 /* (RO) Index of next Eager index to use. */ 256 ur_rcvegrindextail = 2, 257 /* (RW) Eager TID to be processed next */ 258 ur_rcvegrindexhead = 3, 259 /* (RO) Receive Eager Offset Tail */ 260 ur_rcvegroffsettail = 4, 261 /* For internal use only; max register number. */ 262 ur_maxreg, 263 /* (RW) Receive TID flow table */ 264 ur_rcvtidflowtable = 256 265 }; 266 267 #endif /* _LINIUX__HFI1_USER_H */ 268
