1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * Copyright (c) 2001-2002 by David Brownell
4 *
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms of the GNU General Public License as published by the
7 * Free Software Foundation; either version 2 of the License, or (at your
8 * option) any later version.
9 *
10 * This program is distributed in the hope that it will be useful, but
11 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
12 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
13 * for more details.
14 *
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software Foundation,
17 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
18 */
19
20 #ifndef __USB_CORE_HCD_H
21 #define __USB_CORE_HCD_H
22
23 #ifdef __KERNEL__
24
25 #include <linux/rwsem.h>
26 #include <linux/interrupt.h>
27 #include <linux/idr.h>
28
29 #define MAX_TOPO_LEVEL 6
30
31 /* This file contains declarations of usbcore internals that are mostly
32 * used or exposed by Host Controller Drivers.
33 */
34
35 /*
36 * USB Packet IDs (PIDs)
37 */
38 #define USB_PID_EXT 0xf0 /* USB 2.0 LPM ECN */
39 #define USB_PID_OUT 0xe1
40 #define USB_PID_ACK 0xd2
41 #define USB_PID_DATA0 0xc3
42 #define USB_PID_PING 0xb4 /* USB 2.0 */
43 #define USB_PID_SOF 0xa5
44 #define USB_PID_NYET 0x96 /* USB 2.0 */
45 #define USB_PID_DATA2 0x87 /* USB 2.0 */
46 #define USB_PID_SPLIT 0x78 /* USB 2.0 */
47 #define USB_PID_IN 0x69
48 #define USB_PID_NAK 0x5a
49 #define USB_PID_DATA1 0x4b
50 #define USB_PID_PREAMBLE 0x3c /* Token mode */
51 #define USB_PID_ERR 0x3c /* USB 2.0: handshake mode */
52 #define USB_PID_SETUP 0x2d
53 #define USB_PID_STALL 0x1e
54 #define USB_PID_MDATA 0x0f /* USB 2.0 */
55
56 /*-------------------------------------------------------------------------*/
57
58 /*
59 * USB Host Controller Driver (usb_hcd) framework
60 *
61 * Since "struct usb_bus" is so thin, you can't share much code in it.
62 * This framework is a layer over that, and should be more sharable.
63 */
64
65 /*-------------------------------------------------------------------------*/
66
67 struct giveback_urb_bh {
68 bool running;
69 spinlock_t lock;
70 struct list_head head;
71 struct tasklet_struct bh;
72 struct usb_host_endpoint *completing_ep;
73 };
74
75 enum usb_dev_authorize_policy {
76 USB_DEVICE_AUTHORIZE_NONE = 0,
77 USB_DEVICE_AUTHORIZE_ALL = 1,
78 USB_DEVICE_AUTHORIZE_INTERNAL = 2,
79 };
80
81 struct usb_hcd {
82
83 /*
84 * housekeeping
85 */
86 struct usb_bus self; /* hcd is-a bus */
87 struct kref kref; /* reference counter */
88
89 const char *product_desc; /* product/vendor string */
90 int speed; /* Speed for this roothub.
91 * May be different from
92 * hcd->driver->flags & HCD_MASK
93 */
94 char irq_descr[24]; /* driver + bus # */
95
96 struct timer_list rh_timer; /* drives root-hub polling */
97 struct urb *status_urb; /* the current status urb */
98 #ifdef CONFIG_PM
99 struct work_struct wakeup_work; /* for remote wakeup */
100 #endif
101 struct work_struct died_work; /* for when the device dies */
102
103 /*
104 * hardware info/state
105 */
106 const struct hc_driver *driver; /* hw-specific hooks */
107
108 /*
109 * OTG and some Host controllers need software interaction with phys;
110 * other external phys should be software-transparent
111 */
112 struct usb_phy *usb_phy;
113 struct usb_phy_roothub *phy_roothub;
114
115 /* Flags that need to be manipulated atomically because they can
116 * change while the host controller is running. Always use
117 * set_bit() or clear_bit() to change their values.
118 */
119 unsigned long flags;
120 #define HCD_FLAG_HW_ACCESSIBLE 0 /* at full power */
121 #define HCD_FLAG_POLL_RH 2 /* poll for rh status? */
122 #define HCD_FLAG_POLL_PENDING 3 /* status has changed? */
123 #define HCD_FLAG_WAKEUP_PENDING 4 /* root hub is resuming? */
124 #define HCD_FLAG_RH_RUNNING 5 /* root hub is running? */
125 #define HCD_FLAG_DEAD 6 /* controller has died? */
126 #define HCD_FLAG_INTF_AUTHORIZED 7 /* authorize interfaces? */
127
128 /* The flags can be tested using these macros; they are likely to
129 * be slightly faster than test_bit().
130 */
131 #define HCD_HW_ACCESSIBLE(hcd) ((hcd)->flags & (1U << HCD_FLAG_HW_ACCESSIBLE))
132 #define HCD_POLL_RH(hcd) ((hcd)->flags & (1U << HCD_FLAG_POLL_RH))
133 #define HCD_POLL_PENDING(hcd) ((hcd)->flags & (1U << HCD_FLAG_POLL_PENDING))
134 #define HCD_WAKEUP_PENDING(hcd) ((hcd)->flags & (1U << HCD_FLAG_WAKEUP_PENDING))
135 #define HCD_RH_RUNNING(hcd) ((hcd)->flags & (1U << HCD_FLAG_RH_RUNNING))
136 #define HCD_DEAD(hcd) ((hcd)->flags & (1U << HCD_FLAG_DEAD))
137
138 /*
139 * Specifies if interfaces are authorized by default
140 * or they require explicit user space authorization; this bit is
141 * settable through /sys/class/usb_host/X/interface_authorized_default
142 */
143 #define HCD_INTF_AUTHORIZED(hcd) \
144 ((hcd)->flags & (1U << HCD_FLAG_INTF_AUTHORIZED))
145
146 /*
147 * Specifies if devices are authorized by default
148 * or they require explicit user space authorization; this bit is
149 * settable through /sys/class/usb_host/X/authorized_default
150 */
151 enum usb_dev_authorize_policy dev_policy;
152
153 /* Flags that get set only during HCD registration or removal. */
154 unsigned rh_registered:1;/* is root hub registered? */
155 unsigned rh_pollable:1; /* may we poll the root hub? */
156 unsigned msix_enabled:1; /* driver has MSI-X enabled? */
157 unsigned msi_enabled:1; /* driver has MSI enabled? */
158 /*
159 * do not manage the PHY state in the HCD core, instead let the driver
160 * handle this (for example if the PHY can only be turned on after a
161 * specific event)
162 */
163 unsigned skip_phy_initialization:1;
164
165 /* The next flag is a stopgap, to be removed when all the HCDs
166 * support the new root-hub polling mechanism. */
167 unsigned uses_new_polling:1;
168 unsigned wireless:1; /* Wireless USB HCD */
169 unsigned has_tt:1; /* Integrated TT in root hub */
170 unsigned amd_resume_bug:1; /* AMD remote wakeup quirk */
171 unsigned can_do_streams:1; /* HC supports streams */
172 unsigned tpl_support:1; /* OTG & EH TPL support */
173 unsigned cant_recv_wakeups:1;
174 /* wakeup requests from downstream aren't received */
175
176 unsigned int irq; /* irq allocated */
177 void __iomem *regs; /* device memory/io */
178 resource_size_t rsrc_start; /* memory/io resource start */
179 resource_size_t rsrc_len; /* memory/io resource length */
180 unsigned power_budget; /* in mA, 0 = no limit */
181
182 struct giveback_urb_bh high_prio_bh;
183 struct giveback_urb_bh low_prio_bh;
184
185 /* bandwidth_mutex should be taken before adding or removing
186 * any new bus bandwidth constraints:
187 * 1. Before adding a configuration for a new device.
188 * 2. Before removing the configuration to put the device into
189 * the addressed state.
190 * 3. Before selecting a different configuration.
191 * 4. Before selecting an alternate interface setting.
192 *
193 * bandwidth_mutex should be dropped after a successful control message
194 * to the device, or resetting the bandwidth after a failed attempt.
195 */
196 struct mutex *address0_mutex;
197 struct mutex *bandwidth_mutex;
198 struct usb_hcd *shared_hcd;
199 struct usb_hcd *primary_hcd;
200
201
202 #define HCD_BUFFER_POOLS 4
203 struct dma_pool *pool[HCD_BUFFER_POOLS];
204
205 int state;
206 # define __ACTIVE 0x01
207 # define __SUSPEND 0x04
208 # define __TRANSIENT 0x80
209
210 # define HC_STATE_HALT 0
211 # define HC_STATE_RUNNING (__ACTIVE)
212 # define HC_STATE_QUIESCING (__SUSPEND|__TRANSIENT|__ACTIVE)
213 # define HC_STATE_RESUMING (__SUSPEND|__TRANSIENT)
214 # define HC_STATE_SUSPENDED (__SUSPEND)
215
216 #define HC_IS_RUNNING(state) ((state) & __ACTIVE)
217 #define HC_IS_SUSPENDED(state) ((state) & __SUSPEND)
218
219 /* memory pool for HCs having local memory, or %NULL */
220 struct gen_pool *localmem_pool;
221
222 /* more shared queuing code would be good; it should support
223 * smarter scheduling, handle transaction translators, etc;
224 * input size of periodic table to an interrupt scheduler.
225 * (ohci 32, uhci 1024, ehci 256/512/1024).
226 */
227
228 /* The HC driver's private data is stored at the end of
229 * this structure.
230 */
231 unsigned long hcd_priv[]
232 __attribute__ ((aligned(sizeof(s64))));
233 };
234
235 /* 2.4 does this a bit differently ... */
hcd_to_bus(struct usb_hcd * hcd)236 static inline struct usb_bus *hcd_to_bus(struct usb_hcd *hcd)
237 {
238 return &hcd->self;
239 }
240
bus_to_hcd(struct usb_bus * bus)241 static inline struct usb_hcd *bus_to_hcd(struct usb_bus *bus)
242 {
243 return container_of(bus, struct usb_hcd, self);
244 }
245
246 /*-------------------------------------------------------------------------*/
247
248
249 struct hc_driver {
250 const char *description; /* "ehci-hcd" etc */
251 const char *product_desc; /* product/vendor string */
252 size_t hcd_priv_size; /* size of private data */
253
254 /* irq handler */
255 irqreturn_t (*irq) (struct usb_hcd *hcd);
256
257 int flags;
258 #define HCD_MEMORY 0x0001 /* HC regs use memory (else I/O) */
259 #define HCD_DMA 0x0002 /* HC uses DMA */
260 #define HCD_SHARED 0x0004 /* Two (or more) usb_hcds share HW */
261 #define HCD_USB11 0x0010 /* USB 1.1 */
262 #define HCD_USB2 0x0020 /* USB 2.0 */
263 #define HCD_USB25 0x0030 /* Wireless USB 1.0 (USB 2.5)*/
264 #define HCD_USB3 0x0040 /* USB 3.0 */
265 #define HCD_USB31 0x0050 /* USB 3.1 */
266 #define HCD_USB32 0x0060 /* USB 3.2 */
267 #define HCD_MASK 0x0070
268 #define HCD_BH 0x0100 /* URB complete in BH context */
269
270 /* called to init HCD and root hub */
271 int (*reset) (struct usb_hcd *hcd);
272 int (*start) (struct usb_hcd *hcd);
273
274 /* NOTE: these suspend/resume calls relate to the HC as
275 * a whole, not just the root hub; they're for PCI bus glue.
276 */
277 /* called after suspending the hub, before entering D3 etc */
278 int (*pci_suspend)(struct usb_hcd *hcd, bool do_wakeup);
279
280 /* called after entering D0 (etc), before resuming the hub */
281 int (*pci_resume)(struct usb_hcd *hcd, bool hibernated);
282
283 /* cleanly make HCD stop writing memory and doing I/O */
284 void (*stop) (struct usb_hcd *hcd);
285
286 /* shutdown HCD */
287 void (*shutdown) (struct usb_hcd *hcd);
288
289 /* return current frame number */
290 int (*get_frame_number) (struct usb_hcd *hcd);
291
292 /* manage i/o requests, device state */
293 int (*urb_enqueue)(struct usb_hcd *hcd,
294 struct urb *urb, gfp_t mem_flags);
295 int (*urb_dequeue)(struct usb_hcd *hcd,
296 struct urb *urb, int status);
297
298 /*
299 * (optional) these hooks allow an HCD to override the default DMA
300 * mapping and unmapping routines. In general, they shouldn't be
301 * necessary unless the host controller has special DMA requirements,
302 * such as alignment contraints. If these are not specified, the
303 * general usb_hcd_(un)?map_urb_for_dma functions will be used instead
304 * (and it may be a good idea to call these functions in your HCD
305 * implementation)
306 */
307 int (*map_urb_for_dma)(struct usb_hcd *hcd, struct urb *urb,
308 gfp_t mem_flags);
309 void (*unmap_urb_for_dma)(struct usb_hcd *hcd, struct urb *urb);
310
311 /* hw synch, freeing endpoint resources that urb_dequeue can't */
312 void (*endpoint_disable)(struct usb_hcd *hcd,
313 struct usb_host_endpoint *ep);
314
315 /* (optional) reset any endpoint state such as sequence number
316 and current window */
317 void (*endpoint_reset)(struct usb_hcd *hcd,
318 struct usb_host_endpoint *ep);
319
320 /* root hub support */
321 int (*hub_status_data) (struct usb_hcd *hcd, char *buf);
322 int (*hub_control) (struct usb_hcd *hcd,
323 u16 typeReq, u16 wValue, u16 wIndex,
324 char *buf, u16 wLength);
325 int (*bus_suspend)(struct usb_hcd *);
326 int (*bus_resume)(struct usb_hcd *);
327 int (*start_port_reset)(struct usb_hcd *, unsigned port_num);
328 unsigned long (*get_resuming_ports)(struct usb_hcd *);
329
330 /* force handover of high-speed port to full-speed companion */
331 void (*relinquish_port)(struct usb_hcd *, int);
332 /* has a port been handed over to a companion? */
333 int (*port_handed_over)(struct usb_hcd *, int);
334
335 /* CLEAR_TT_BUFFER completion callback */
336 void (*clear_tt_buffer_complete)(struct usb_hcd *,
337 struct usb_host_endpoint *);
338
339 /* xHCI specific functions */
340 /* Called by usb_alloc_dev to alloc HC device structures */
341 int (*alloc_dev)(struct usb_hcd *, struct usb_device *);
342 /* Called by usb_disconnect to free HC device structures */
343 void (*free_dev)(struct usb_hcd *, struct usb_device *);
344 /* Change a group of bulk endpoints to support multiple stream IDs */
345 int (*alloc_streams)(struct usb_hcd *hcd, struct usb_device *udev,
346 struct usb_host_endpoint **eps, unsigned int num_eps,
347 unsigned int num_streams, gfp_t mem_flags);
348 /* Reverts a group of bulk endpoints back to not using stream IDs.
349 * Can fail if we run out of memory.
350 */
351 int (*free_streams)(struct usb_hcd *hcd, struct usb_device *udev,
352 struct usb_host_endpoint **eps, unsigned int num_eps,
353 gfp_t mem_flags);
354
355 /* Bandwidth computation functions */
356 /* Note that add_endpoint() can only be called once per endpoint before
357 * check_bandwidth() or reset_bandwidth() must be called.
358 * drop_endpoint() can only be called once per endpoint also.
359 * A call to xhci_drop_endpoint() followed by a call to
360 * xhci_add_endpoint() will add the endpoint to the schedule with
361 * possibly new parameters denoted by a different endpoint descriptor
362 * in usb_host_endpoint. A call to xhci_add_endpoint() followed by a
363 * call to xhci_drop_endpoint() is not allowed.
364 */
365 /* Allocate endpoint resources and add them to a new schedule */
366 int (*add_endpoint)(struct usb_hcd *, struct usb_device *,
367 struct usb_host_endpoint *);
368 /* Drop an endpoint from a new schedule */
369 int (*drop_endpoint)(struct usb_hcd *, struct usb_device *,
370 struct usb_host_endpoint *);
371 /* Check that a new hardware configuration, set using
372 * endpoint_enable and endpoint_disable, does not exceed bus
373 * bandwidth. This must be called before any set configuration
374 * or set interface requests are sent to the device.
375 */
376 int (*check_bandwidth)(struct usb_hcd *, struct usb_device *);
377 /* Reset the device schedule to the last known good schedule,
378 * which was set from a previous successful call to
379 * check_bandwidth(). This reverts any add_endpoint() and
380 * drop_endpoint() calls since that last successful call.
381 * Used for when a check_bandwidth() call fails due to resource
382 * or bandwidth constraints.
383 */
384 void (*reset_bandwidth)(struct usb_hcd *, struct usb_device *);
385 /* Returns the hardware-chosen device address */
386 int (*address_device)(struct usb_hcd *, struct usb_device *udev);
387 /* prepares the hardware to send commands to the device */
388 int (*enable_device)(struct usb_hcd *, struct usb_device *udev);
389 /* Notifies the HCD after a hub descriptor is fetched.
390 * Will block.
391 */
392 int (*update_hub_device)(struct usb_hcd *, struct usb_device *hdev,
393 struct usb_tt *tt, gfp_t mem_flags);
394 int (*reset_device)(struct usb_hcd *, struct usb_device *);
395 /* Notifies the HCD after a device is connected and its
396 * address is set
397 */
398 int (*update_device)(struct usb_hcd *, struct usb_device *);
399 int (*set_usb2_hw_lpm)(struct usb_hcd *, struct usb_device *, int);
400 /* USB 3.0 Link Power Management */
401 /* Returns the USB3 hub-encoded value for the U1/U2 timeout. */
402 int (*enable_usb3_lpm_timeout)(struct usb_hcd *,
403 struct usb_device *, enum usb3_link_state state);
404 /* The xHCI host controller can still fail the command to
405 * disable the LPM timeouts, so this can return an error code.
406 */
407 int (*disable_usb3_lpm_timeout)(struct usb_hcd *,
408 struct usb_device *, enum usb3_link_state state);
409 int (*find_raw_port_number)(struct usb_hcd *, int);
410 /* Call for power on/off the port if necessary */
411 int (*port_power)(struct usb_hcd *hcd, int portnum, bool enable);
412
413 };
414
hcd_giveback_urb_in_bh(struct usb_hcd * hcd)415 static inline int hcd_giveback_urb_in_bh(struct usb_hcd *hcd)
416 {
417 return hcd->driver->flags & HCD_BH;
418 }
419
hcd_periodic_completion_in_progress(struct usb_hcd * hcd,struct usb_host_endpoint * ep)420 static inline bool hcd_periodic_completion_in_progress(struct usb_hcd *hcd,
421 struct usb_host_endpoint *ep)
422 {
423 return hcd->high_prio_bh.completing_ep == ep;
424 }
425
hcd_uses_dma(struct usb_hcd * hcd)426 static inline bool hcd_uses_dma(struct usb_hcd *hcd)
427 {
428 return IS_ENABLED(CONFIG_HAS_DMA) && (hcd->driver->flags & HCD_DMA);
429 }
430
431 extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb);
432 extern int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb,
433 int status);
434 extern void usb_hcd_unlink_urb_from_ep(struct usb_hcd *hcd, struct urb *urb);
435
436 extern int usb_hcd_submit_urb(struct urb *urb, gfp_t mem_flags);
437 extern int usb_hcd_unlink_urb(struct urb *urb, int status);
438 extern void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb,
439 int status);
440 extern int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
441 gfp_t mem_flags);
442 extern void usb_hcd_unmap_urb_setup_for_dma(struct usb_hcd *, struct urb *);
443 extern void usb_hcd_unmap_urb_for_dma(struct usb_hcd *, struct urb *);
444 extern void usb_hcd_flush_endpoint(struct usb_device *udev,
445 struct usb_host_endpoint *ep);
446 extern void usb_hcd_disable_endpoint(struct usb_device *udev,
447 struct usb_host_endpoint *ep);
448 extern void usb_hcd_reset_endpoint(struct usb_device *udev,
449 struct usb_host_endpoint *ep);
450 extern void usb_hcd_synchronize_unlinks(struct usb_device *udev);
451 extern int usb_hcd_alloc_bandwidth(struct usb_device *udev,
452 struct usb_host_config *new_config,
453 struct usb_host_interface *old_alt,
454 struct usb_host_interface *new_alt);
455 extern int usb_hcd_get_frame_number(struct usb_device *udev);
456
457 struct usb_hcd *__usb_create_hcd(const struct hc_driver *driver,
458 struct device *sysdev, struct device *dev, const char *bus_name,
459 struct usb_hcd *primary_hcd);
460 extern struct usb_hcd *usb_create_hcd(const struct hc_driver *driver,
461 struct device *dev, const char *bus_name);
462 extern struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver,
463 struct device *dev, const char *bus_name,
464 struct usb_hcd *shared_hcd);
465 extern struct usb_hcd *usb_get_hcd(struct usb_hcd *hcd);
466 extern void usb_put_hcd(struct usb_hcd *hcd);
467 extern int usb_hcd_is_primary_hcd(struct usb_hcd *hcd);
468 extern int usb_add_hcd(struct usb_hcd *hcd,
469 unsigned int irqnum, unsigned long irqflags);
470 extern void usb_remove_hcd(struct usb_hcd *hcd);
471 extern int usb_hcd_find_raw_port_number(struct usb_hcd *hcd, int port1);
472 int usb_hcd_setup_local_mem(struct usb_hcd *hcd, phys_addr_t phys_addr,
473 dma_addr_t dma, size_t size);
474
475 struct platform_device;
476 extern void usb_hcd_platform_shutdown(struct platform_device *dev);
477
478 #ifdef CONFIG_USB_PCI
479 struct pci_dev;
480 struct pci_device_id;
481 extern int usb_hcd_pci_probe(struct pci_dev *dev,
482 const struct pci_device_id *id,
483 const struct hc_driver *driver);
484 extern void usb_hcd_pci_remove(struct pci_dev *dev);
485 extern void usb_hcd_pci_shutdown(struct pci_dev *dev);
486
487 extern int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *dev);
488
489 #ifdef CONFIG_PM
490 extern const struct dev_pm_ops usb_hcd_pci_pm_ops;
491 #endif
492 #endif /* CONFIG_USB_PCI */
493
494 /* pci-ish (pdev null is ok) buffer alloc/mapping support */
495 void usb_init_pool_max(void);
496 int hcd_buffer_create(struct usb_hcd *hcd);
497 void hcd_buffer_destroy(struct usb_hcd *hcd);
498
499 void *hcd_buffer_alloc(struct usb_bus *bus, size_t size,
500 gfp_t mem_flags, dma_addr_t *dma);
501 void hcd_buffer_free(struct usb_bus *bus, size_t size,
502 void *addr, dma_addr_t dma);
503
504 /* generic bus glue, needed for host controllers that don't use PCI */
505 extern irqreturn_t usb_hcd_irq(int irq, void *__hcd);
506
507 extern void usb_hc_died(struct usb_hcd *hcd);
508 extern void usb_hcd_poll_rh_status(struct usb_hcd *hcd);
509 extern void usb_wakeup_notification(struct usb_device *hdev,
510 unsigned int portnum);
511
512 extern void usb_hcd_start_port_resume(struct usb_bus *bus, int portnum);
513 extern void usb_hcd_end_port_resume(struct usb_bus *bus, int portnum);
514
515 /* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */
516 #define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1)
517 #define usb_dotoggle(dev, ep, out) ((dev)->toggle[out] ^= (1 << (ep)))
518 #define usb_settoggle(dev, ep, out, bit) \
519 ((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | \
520 ((bit) << (ep)))
521
522 /* -------------------------------------------------------------------------- */
523
524 /* Enumeration is only for the hub driver, or HCD virtual root hubs */
525 extern struct usb_device *usb_alloc_dev(struct usb_device *parent,
526 struct usb_bus *, unsigned port);
527 extern int usb_new_device(struct usb_device *dev);
528 extern void usb_disconnect(struct usb_device **);
529
530 extern int usb_get_configuration(struct usb_device *dev);
531 extern void usb_destroy_configuration(struct usb_device *dev);
532
533 /*-------------------------------------------------------------------------*/
534
535 /*
536 * HCD Root Hub support
537 */
538
539 #include <linux/usb/ch11.h>
540
541 /*
542 * As of USB 2.0, full/low speed devices are segregated into trees.
543 * One type grows from USB 1.1 host controllers (OHCI, UHCI etc).
544 * The other type grows from high speed hubs when they connect to
545 * full/low speed devices using "Transaction Translators" (TTs).
546 *
547 * TTs should only be known to the hub driver, and high speed bus
548 * drivers (only EHCI for now). They affect periodic scheduling and
549 * sometimes control/bulk error recovery.
550 */
551
552 struct usb_device;
553
554 struct usb_tt {
555 struct usb_device *hub; /* upstream highspeed hub */
556 int multi; /* true means one TT per port */
557 unsigned think_time; /* think time in ns */
558 void *hcpriv; /* HCD private data */
559
560 /* for control/bulk error recovery (CLEAR_TT_BUFFER) */
561 spinlock_t lock;
562 struct list_head clear_list; /* of usb_tt_clear */
563 struct work_struct clear_work;
564 };
565
566 struct usb_tt_clear {
567 struct list_head clear_list;
568 unsigned tt;
569 u16 devinfo;
570 struct usb_hcd *hcd;
571 struct usb_host_endpoint *ep;
572 };
573
574 extern int usb_hub_clear_tt_buffer(struct urb *urb);
575 extern void usb_ep0_reinit(struct usb_device *);
576
577 /* (shifted) direction/type/recipient from the USB 2.0 spec, table 9.2 */
578 #define DeviceRequest \
579 ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
580 #define DeviceOutRequest \
581 ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_DEVICE)<<8)
582
583 #define InterfaceRequest \
584 ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_INTERFACE)<<8)
585
586 #define EndpointRequest \
587 ((USB_DIR_IN|USB_TYPE_STANDARD|USB_RECIP_ENDPOINT)<<8)
588 #define EndpointOutRequest \
589 ((USB_DIR_OUT|USB_TYPE_STANDARD|USB_RECIP_ENDPOINT)<<8)
590
591 /* class requests from the USB 2.0 hub spec, table 11-15 */
592 #define HUB_CLASS_REQ(dir, type, request) ((((dir) | (type)) << 8) | (request))
593 /* GetBusState and SetHubDescriptor are optional, omitted */
594 #define ClearHubFeature HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_HUB, USB_REQ_CLEAR_FEATURE)
595 #define ClearPortFeature HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_PORT, USB_REQ_CLEAR_FEATURE)
596 #define GetHubDescriptor HUB_CLASS_REQ(USB_DIR_IN, USB_RT_HUB, USB_REQ_GET_DESCRIPTOR)
597 #define GetHubStatus HUB_CLASS_REQ(USB_DIR_IN, USB_RT_HUB, USB_REQ_GET_STATUS)
598 #define GetPortStatus HUB_CLASS_REQ(USB_DIR_IN, USB_RT_PORT, USB_REQ_GET_STATUS)
599 #define SetHubFeature HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_HUB, USB_REQ_SET_FEATURE)
600 #define SetPortFeature HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_PORT, USB_REQ_SET_FEATURE)
601 #define ClearTTBuffer HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_PORT, HUB_CLEAR_TT_BUFFER)
602 #define ResetTT HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_PORT, HUB_RESET_TT)
603 #define GetTTState HUB_CLASS_REQ(USB_DIR_IN, USB_RT_PORT, HUB_GET_TT_STATE)
604 #define StopTT HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_PORT, HUB_STOP_TT)
605
606
607 /*-------------------------------------------------------------------------*/
608
609 /* class requests from USB 3.1 hub spec, table 10-7 */
610 #define SetHubDepth HUB_CLASS_REQ(USB_DIR_OUT, USB_RT_HUB, HUB_SET_DEPTH)
611 #define GetPortErrorCount HUB_CLASS_REQ(USB_DIR_IN, USB_RT_PORT, HUB_GET_PORT_ERR_COUNT)
612
613 /*
614 * Generic bandwidth allocation constants/support
615 */
616 #define FRAME_TIME_USECS 1000L
617 #define BitTime(bytecount) (7 * 8 * bytecount / 6) /* with integer truncation */
618 /* Trying not to use worst-case bit-stuffing
619 * of (7/6 * 8 * bytecount) = 9.33 * bytecount */
620 /* bytecount = data payload byte count */
621
622 #define NS_TO_US(ns) DIV_ROUND_UP(ns, 1000L)
623 /* convert nanoseconds to microseconds, rounding up */
624
625 /*
626 * Full/low speed bandwidth allocation constants/support.
627 */
628 #define BW_HOST_DELAY 1000L /* nanoseconds */
629 #define BW_HUB_LS_SETUP 333L /* nanoseconds */
630 /* 4 full-speed bit times (est.) */
631
632 #define FRAME_TIME_BITS 12000L /* frame = 1 millisecond */
633 #define FRAME_TIME_MAX_BITS_ALLOC (90L * FRAME_TIME_BITS / 100L)
634 #define FRAME_TIME_MAX_USECS_ALLOC (90L * FRAME_TIME_USECS / 100L)
635
636 /*
637 * Ceiling [nano/micro]seconds (typical) for that many bytes at high speed
638 * ISO is a bit less, no ACK ... from USB 2.0 spec, 5.11.3 (and needed
639 * to preallocate bandwidth)
640 */
641 #define USB2_HOST_DELAY 5 /* nsec, guess */
642 #define HS_NSECS(bytes) (((55 * 8 * 2083) \
643 + (2083UL * (3 + BitTime(bytes))))/1000 \
644 + USB2_HOST_DELAY)
645 #define HS_NSECS_ISO(bytes) (((38 * 8 * 2083) \
646 + (2083UL * (3 + BitTime(bytes))))/1000 \
647 + USB2_HOST_DELAY)
648 #define HS_USECS(bytes) NS_TO_US(HS_NSECS(bytes))
649 #define HS_USECS_ISO(bytes) NS_TO_US(HS_NSECS_ISO(bytes))
650
651 extern long usb_calc_bus_time(int speed, int is_input,
652 int isoc, int bytecount);
653
654 /*-------------------------------------------------------------------------*/
655
656 extern void usb_set_device_state(struct usb_device *udev,
657 enum usb_device_state new_state);
658
659 /*-------------------------------------------------------------------------*/
660
661 /* exported only within usbcore */
662
663 extern struct idr usb_bus_idr;
664 extern struct mutex usb_bus_idr_lock;
665 extern wait_queue_head_t usb_kill_urb_queue;
666
667
668 #define usb_endpoint_out(ep_dir) (!((ep_dir) & USB_DIR_IN))
669
670 #ifdef CONFIG_PM
671 extern unsigned usb_wakeup_enabled_descendants(struct usb_device *udev);
672 extern void usb_root_hub_lost_power(struct usb_device *rhdev);
673 extern int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg);
674 extern int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg);
675 extern void usb_hcd_resume_root_hub(struct usb_hcd *hcd);
676 #else
usb_wakeup_enabled_descendants(struct usb_device * udev)677 static inline unsigned usb_wakeup_enabled_descendants(struct usb_device *udev)
678 {
679 return 0;
680 }
usb_hcd_resume_root_hub(struct usb_hcd * hcd)681 static inline void usb_hcd_resume_root_hub(struct usb_hcd *hcd)
682 {
683 return;
684 }
685 #endif /* CONFIG_PM */
686
687 /*-------------------------------------------------------------------------*/
688
689 #if defined(CONFIG_USB_MON) || defined(CONFIG_USB_MON_MODULE)
690
691 struct usb_mon_operations {
692 void (*urb_submit)(struct usb_bus *bus, struct urb *urb);
693 void (*urb_submit_error)(struct usb_bus *bus, struct urb *urb, int err);
694 void (*urb_complete)(struct usb_bus *bus, struct urb *urb, int status);
695 /* void (*urb_unlink)(struct usb_bus *bus, struct urb *urb); */
696 };
697
698 extern const struct usb_mon_operations *mon_ops;
699
usbmon_urb_submit(struct usb_bus * bus,struct urb * urb)700 static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb)
701 {
702 if (bus->monitored)
703 (*mon_ops->urb_submit)(bus, urb);
704 }
705
usbmon_urb_submit_error(struct usb_bus * bus,struct urb * urb,int error)706 static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb,
707 int error)
708 {
709 if (bus->monitored)
710 (*mon_ops->urb_submit_error)(bus, urb, error);
711 }
712
usbmon_urb_complete(struct usb_bus * bus,struct urb * urb,int status)713 static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb,
714 int status)
715 {
716 if (bus->monitored)
717 (*mon_ops->urb_complete)(bus, urb, status);
718 }
719
720 int usb_mon_register(const struct usb_mon_operations *ops);
721 void usb_mon_deregister(void);
722
723 #else
724
usbmon_urb_submit(struct usb_bus * bus,struct urb * urb)725 static inline void usbmon_urb_submit(struct usb_bus *bus, struct urb *urb) {}
usbmon_urb_submit_error(struct usb_bus * bus,struct urb * urb,int error)726 static inline void usbmon_urb_submit_error(struct usb_bus *bus, struct urb *urb,
727 int error) {}
usbmon_urb_complete(struct usb_bus * bus,struct urb * urb,int status)728 static inline void usbmon_urb_complete(struct usb_bus *bus, struct urb *urb,
729 int status) {}
730
731 #endif /* CONFIG_USB_MON || CONFIG_USB_MON_MODULE */
732
733 /*-------------------------------------------------------------------------*/
734
735 /* random stuff */
736
737 #define RUN_CONTEXT (in_irq() ? "in_irq" \
738 : (in_interrupt() ? "in_interrupt" : "can sleep"))
739
740
741 /* This rwsem is for use only by the hub driver and ehci-hcd.
742 * Nobody else should touch it.
743 */
744 extern struct rw_semaphore ehci_cf_port_reset_rwsem;
745
746 /* Keep track of which host controller drivers are loaded */
747 #define USB_UHCI_LOADED 0
748 #define USB_OHCI_LOADED 1
749 #define USB_EHCI_LOADED 2
750 extern unsigned long usb_hcds_loaded;
751
752 #endif /* __KERNEL__ */
753
754 #endif /* __USB_CORE_HCD_H */
755
