1 /* SPDX-License-Identifier: MIT */
2 /*
3  * Copyright © 2014-2019 Intel Corporation
4  */
5 
6 #ifndef _INTEL_GUC_FWIF_H
7 #define _INTEL_GUC_FWIF_H
8 
9 #include <linux/bits.h>
10 #include <linux/compiler.h>
11 #include <linux/types.h>
12 
13 #define GUC_CLIENT_PRIORITY_KMD_HIGH	0
14 #define GUC_CLIENT_PRIORITY_HIGH	1
15 #define GUC_CLIENT_PRIORITY_KMD_NORMAL	2
16 #define GUC_CLIENT_PRIORITY_NORMAL	3
17 #define GUC_CLIENT_PRIORITY_NUM		4
18 
19 #define GUC_MAX_STAGE_DESCRIPTORS	1024
20 #define	GUC_INVALID_STAGE_ID		GUC_MAX_STAGE_DESCRIPTORS
21 
22 #define GUC_RENDER_ENGINE		0
23 #define GUC_VIDEO_ENGINE		1
24 #define GUC_BLITTER_ENGINE		2
25 #define GUC_VIDEOENHANCE_ENGINE		3
26 #define GUC_VIDEO_ENGINE2		4
27 #define GUC_MAX_ENGINES_NUM		(GUC_VIDEO_ENGINE2 + 1)
28 
29 #define GUC_MAX_ENGINE_CLASSES		5
30 #define GUC_MAX_INSTANCES_PER_CLASS	16
31 
32 #define GUC_DOORBELL_INVALID		256
33 
34 #define GUC_DB_SIZE			(PAGE_SIZE)
35 #define GUC_WQ_SIZE			(PAGE_SIZE * 2)
36 
37 /* Work queue item header definitions */
38 #define WQ_STATUS_ACTIVE		1
39 #define WQ_STATUS_SUSPENDED		2
40 #define WQ_STATUS_CMD_ERROR		3
41 #define WQ_STATUS_ENGINE_ID_NOT_USED	4
42 #define WQ_STATUS_SUSPENDED_FROM_RESET	5
43 #define WQ_TYPE_SHIFT			0
44 #define   WQ_TYPE_BATCH_BUF		(0x1 << WQ_TYPE_SHIFT)
45 #define   WQ_TYPE_PSEUDO		(0x2 << WQ_TYPE_SHIFT)
46 #define   WQ_TYPE_INORDER		(0x3 << WQ_TYPE_SHIFT)
47 #define   WQ_TYPE_NOOP			(0x4 << WQ_TYPE_SHIFT)
48 #define WQ_TARGET_SHIFT			10
49 #define WQ_LEN_SHIFT			16
50 #define WQ_NO_WCFLUSH_WAIT		(1 << 27)
51 #define WQ_PRESENT_WORKLOAD		(1 << 28)
52 
53 #define WQ_RING_TAIL_SHIFT		20
54 #define WQ_RING_TAIL_MAX		0x7FF	/* 2^11 QWords */
55 #define WQ_RING_TAIL_MASK		(WQ_RING_TAIL_MAX << WQ_RING_TAIL_SHIFT)
56 
57 #define GUC_STAGE_DESC_ATTR_ACTIVE	BIT(0)
58 #define GUC_STAGE_DESC_ATTR_PENDING_DB	BIT(1)
59 #define GUC_STAGE_DESC_ATTR_KERNEL	BIT(2)
60 #define GUC_STAGE_DESC_ATTR_PREEMPT	BIT(3)
61 #define GUC_STAGE_DESC_ATTR_RESET	BIT(4)
62 #define GUC_STAGE_DESC_ATTR_WQLOCKED	BIT(5)
63 #define GUC_STAGE_DESC_ATTR_PCH		BIT(6)
64 #define GUC_STAGE_DESC_ATTR_TERMINATED	BIT(7)
65 
66 /* New GuC control data */
67 #define GUC_CTL_CTXINFO			0
68 #define   GUC_CTL_CTXNUM_IN16_SHIFT	0
69 #define   GUC_CTL_BASE_ADDR_SHIFT	12
70 
71 #define GUC_CTL_LOG_PARAMS		1
72 #define   GUC_LOG_VALID			(1 << 0)
73 #define   GUC_LOG_NOTIFY_ON_HALF_FULL	(1 << 1)
74 #define   GUC_LOG_ALLOC_IN_MEGABYTE	(1 << 3)
75 #define   GUC_LOG_CRASH_SHIFT		4
76 #define   GUC_LOG_CRASH_MASK		(0x3 << GUC_LOG_CRASH_SHIFT)
77 #define   GUC_LOG_DPC_SHIFT		6
78 #define   GUC_LOG_DPC_MASK	        (0x7 << GUC_LOG_DPC_SHIFT)
79 #define   GUC_LOG_ISR_SHIFT		9
80 #define   GUC_LOG_ISR_MASK	        (0x7 << GUC_LOG_ISR_SHIFT)
81 #define   GUC_LOG_BUF_ADDR_SHIFT	12
82 
83 #define GUC_CTL_WA			2
84 #define GUC_CTL_FEATURE			3
85 #define   GUC_CTL_DISABLE_SCHEDULER	(1 << 14)
86 
87 #define GUC_CTL_DEBUG			4
88 #define   GUC_LOG_VERBOSITY_SHIFT	0
89 #define   GUC_LOG_VERBOSITY_LOW		(0 << GUC_LOG_VERBOSITY_SHIFT)
90 #define   GUC_LOG_VERBOSITY_MED		(1 << GUC_LOG_VERBOSITY_SHIFT)
91 #define   GUC_LOG_VERBOSITY_HIGH	(2 << GUC_LOG_VERBOSITY_SHIFT)
92 #define   GUC_LOG_VERBOSITY_ULTRA	(3 << GUC_LOG_VERBOSITY_SHIFT)
93 /* Verbosity range-check limits, without the shift */
94 #define	  GUC_LOG_VERBOSITY_MIN		0
95 #define	  GUC_LOG_VERBOSITY_MAX		3
96 #define	  GUC_LOG_VERBOSITY_MASK	0x0000000f
97 #define	  GUC_LOG_DESTINATION_MASK	(3 << 4)
98 #define   GUC_LOG_DISABLED		(1 << 6)
99 #define   GUC_PROFILE_ENABLED		(1 << 7)
100 
101 #define GUC_CTL_ADS			5
102 #define   GUC_ADS_ADDR_SHIFT		1
103 #define   GUC_ADS_ADDR_MASK		(0xFFFFF << GUC_ADS_ADDR_SHIFT)
104 
105 #define GUC_CTL_MAX_DWORDS		(SOFT_SCRATCH_COUNT - 2) /* [1..14] */
106 
107 /* Work item for submitting workloads into work queue of GuC. */
108 struct guc_wq_item {
109 	u32 header;
110 	u32 context_desc;
111 	u32 submit_element_info;
112 	u32 fence_id;
113 } __packed;
114 
115 struct guc_process_desc {
116 	u32 stage_id;
117 	u64 db_base_addr;
118 	u32 head;
119 	u32 tail;
120 	u32 error_offset;
121 	u64 wq_base_addr;
122 	u32 wq_size_bytes;
123 	u32 wq_status;
124 	u32 engine_presence;
125 	u32 priority;
126 	u32 reserved[30];
127 } __packed;
128 
129 /* engine id and context id is packed into guc_execlist_context.context_id*/
130 #define GUC_ELC_CTXID_OFFSET		0
131 #define GUC_ELC_ENGINE_OFFSET		29
132 
133 /* The execlist context including software and HW information */
134 struct guc_execlist_context {
135 	u32 context_desc;
136 	u32 context_id;
137 	u32 ring_status;
138 	u32 ring_lrca;
139 	u32 ring_begin;
140 	u32 ring_end;
141 	u32 ring_next_free_location;
142 	u32 ring_current_tail_pointer_value;
143 	u8 engine_state_submit_value;
144 	u8 engine_state_wait_value;
145 	u16 pagefault_count;
146 	u16 engine_submit_queue_count;
147 } __packed;
148 
149 /*
150  * This structure describes a stage set arranged for a particular communication
151  * between uKernel (GuC) and Driver (KMD). Technically, this is known as a
152  * "GuC Context descriptor" in the specs, but we use the term "stage descriptor"
153  * to avoid confusion with all the other things already named "context" in the
154  * driver. A static pool of these descriptors are stored inside a GEM object
155  * (stage_desc_pool) which is held for the entire lifetime of our interaction
156  * with the GuC, being allocated before the GuC is loaded with its firmware.
157  */
158 struct guc_stage_desc {
159 	u32 sched_common_area;
160 	u32 stage_id;
161 	u32 pas_id;
162 	u8 engines_used;
163 	u64 db_trigger_cpu;
164 	u32 db_trigger_uk;
165 	u64 db_trigger_phy;
166 	u16 db_id;
167 
168 	struct guc_execlist_context lrc[GUC_MAX_ENGINES_NUM];
169 
170 	u8 attribute;
171 
172 	u32 priority;
173 
174 	u32 wq_sampled_tail_offset;
175 	u32 wq_total_submit_enqueues;
176 
177 	u32 process_desc;
178 	u32 wq_addr;
179 	u32 wq_size;
180 
181 	u32 engine_presence;
182 
183 	u8 engine_suspended;
184 
185 	u8 reserved0[3];
186 	u64 reserved1[1];
187 
188 	u64 desc_private;
189 } __packed;
190 
191 /**
192  * DOC: CTB based communication
193  *
194  * The CTB (command transport buffer) communication between Host and GuC
195  * is based on u32 data stream written to the shared buffer. One buffer can
196  * be used to transmit data only in one direction (one-directional channel).
197  *
198  * Current status of the each buffer is stored in the buffer descriptor.
199  * Buffer descriptor holds tail and head fields that represents active data
200  * stream. The tail field is updated by the data producer (sender), and head
201  * field is updated by the data consumer (receiver)::
202  *
203  *      +------------+
204  *      | DESCRIPTOR |          +=================+============+========+
205  *      +============+          |                 | MESSAGE(s) |        |
206  *      | address    |--------->+=================+============+========+
207  *      +------------+
208  *      | head       |          ^-----head--------^
209  *      +------------+
210  *      | tail       |          ^---------tail-----------------^
211  *      +------------+
212  *      | size       |          ^---------------size--------------------^
213  *      +------------+
214  *
215  * Each message in data stream starts with the single u32 treated as a header,
216  * followed by optional set of u32 data that makes message specific payload::
217  *
218  *      +------------+---------+---------+---------+
219  *      |         MESSAGE                          |
220  *      +------------+---------+---------+---------+
221  *      |   msg[0]   |   [1]   |   ...   |  [n-1]  |
222  *      +------------+---------+---------+---------+
223  *      |   MESSAGE  |       MESSAGE PAYLOAD       |
224  *      +   HEADER   +---------+---------+---------+
225  *      |            |    0    |   ...   |    n    |
226  *      +======+=====+=========+=========+=========+
227  *      | 31:16| code|         |         |         |
228  *      +------+-----+         |         |         |
229  *      |  15:5|flags|         |         |         |
230  *      +------+-----+         |         |         |
231  *      |   4:0|  len|         |         |         |
232  *      +------+-----+---------+---------+---------+
233  *
234  *                   ^-------------len-------------^
235  *
236  * The message header consists of:
237  *
238  * - **len**, indicates length of the message payload (in u32)
239  * - **code**, indicates message code
240  * - **flags**, holds various bits to control message handling
241  */
242 
243 /*
244  * Describes single command transport buffer.
245  * Used by both guc-master and clients.
246  */
247 struct guc_ct_buffer_desc {
248 	u32 addr;		/* gfx address */
249 	u64 host_private;	/* host private data */
250 	u32 size;		/* size in bytes */
251 	u32 head;		/* offset updated by GuC*/
252 	u32 tail;		/* offset updated by owner */
253 	u32 is_in_error;	/* error indicator */
254 	u32 fence;		/* fence updated by GuC */
255 	u32 status;		/* status updated by GuC */
256 	u32 owner;		/* id of the channel owner */
257 	u32 owner_sub_id;	/* owner-defined field for extra tracking */
258 	u32 reserved[5];
259 } __packed;
260 
261 /* Type of command transport buffer */
262 #define INTEL_GUC_CT_BUFFER_TYPE_SEND	0x0u
263 #define INTEL_GUC_CT_BUFFER_TYPE_RECV	0x1u
264 
265 /*
266  * Definition of the command transport message header (DW0)
267  *
268  * bit[4..0]	message len (in dwords)
269  * bit[7..5]	reserved
270  * bit[8]	response (G2H only)
271  * bit[8]	write fence to desc (H2G only)
272  * bit[9]	write status to H2G buff (H2G only)
273  * bit[10]	send status back via G2H (H2G only)
274  * bit[15..11]	reserved
275  * bit[31..16]	action code
276  */
277 #define GUC_CT_MSG_LEN_SHIFT			0
278 #define GUC_CT_MSG_LEN_MASK			0x1F
279 #define GUC_CT_MSG_IS_RESPONSE			(1 << 8)
280 #define GUC_CT_MSG_WRITE_FENCE_TO_DESC		(1 << 8)
281 #define GUC_CT_MSG_WRITE_STATUS_TO_BUFF		(1 << 9)
282 #define GUC_CT_MSG_SEND_STATUS			(1 << 10)
283 #define GUC_CT_MSG_ACTION_SHIFT			16
284 #define GUC_CT_MSG_ACTION_MASK			0xFFFF
285 
286 #define GUC_FORCEWAKE_RENDER	(1 << 0)
287 #define GUC_FORCEWAKE_MEDIA	(1 << 1)
288 
289 #define GUC_POWER_UNSPECIFIED	0
290 #define GUC_POWER_D0		1
291 #define GUC_POWER_D1		2
292 #define GUC_POWER_D2		3
293 #define GUC_POWER_D3		4
294 
295 /* Scheduling policy settings */
296 
297 /* Reset engine upon preempt failure */
298 #define POLICY_RESET_ENGINE		(1<<0)
299 /* Preempt to idle on quantum expiry */
300 #define POLICY_PREEMPT_TO_IDLE		(1<<1)
301 
302 #define POLICY_MAX_NUM_WI 15
303 #define POLICY_DEFAULT_DPC_PROMOTE_TIME_US 500000
304 #define POLICY_DEFAULT_EXECUTION_QUANTUM_US 1000000
305 #define POLICY_DEFAULT_PREEMPTION_TIME_US 500000
306 #define POLICY_DEFAULT_FAULT_TIME_US 250000
307 
308 struct guc_policy {
309 	/* Time for one workload to execute. (in micro seconds) */
310 	u32 execution_quantum;
311 	/* Time to wait for a preemption request to completed before issuing a
312 	 * reset. (in micro seconds). */
313 	u32 preemption_time;
314 	/* How much time to allow to run after the first fault is observed.
315 	 * Then preempt afterwards. (in micro seconds) */
316 	u32 fault_time;
317 	u32 policy_flags;
318 	u32 reserved[8];
319 } __packed;
320 
321 struct guc_policies {
322 	struct guc_policy policy[GUC_CLIENT_PRIORITY_NUM][GUC_MAX_ENGINE_CLASSES];
323 	u32 submission_queue_depth[GUC_MAX_ENGINE_CLASSES];
324 	/* In micro seconds. How much time to allow before DPC processing is
325 	 * called back via interrupt (to prevent DPC queue drain starving).
326 	 * Typically 1000s of micro seconds (example only, not granularity). */
327 	u32 dpc_promote_time;
328 
329 	/* Must be set to take these new values. */
330 	u32 is_valid;
331 
332 	/* Max number of WIs to process per call. A large value may keep CS
333 	 * idle. */
334 	u32 max_num_work_items;
335 
336 	u32 reserved[4];
337 } __packed;
338 
339 /* GuC MMIO reg state struct */
340 
341 
342 #define GUC_REGSET_MAX_REGISTERS	64
343 #define GUC_S3_SAVE_SPACE_PAGES		10
344 
345 struct guc_mmio_reg {
346 	u32 offset;
347 	u32 value;
348 	u32 flags;
349 #define GUC_REGSET_MASKED		(1 << 0)
350 } __packed;
351 
352 struct guc_mmio_regset {
353 	struct guc_mmio_reg registers[GUC_REGSET_MAX_REGISTERS];
354 	u32 values_valid;
355 	u32 number_of_registers;
356 } __packed;
357 
358 /* GuC register sets */
359 struct guc_mmio_reg_state {
360 	struct guc_mmio_regset engine_reg[GUC_MAX_ENGINE_CLASSES][GUC_MAX_INSTANCES_PER_CLASS];
361 	u32 reserved[98];
362 } __packed;
363 
364 /* HW info */
365 struct guc_gt_system_info {
366 	u32 slice_enabled;
367 	u32 rcs_enabled;
368 	u32 reserved0;
369 	u32 bcs_enabled;
370 	u32 vdbox_enable_mask;
371 	u32 vdbox_sfc_support_mask;
372 	u32 vebox_enable_mask;
373 	u32 reserved[9];
374 } __packed;
375 
376 /* Clients info */
377 struct guc_ct_pool_entry {
378 	struct guc_ct_buffer_desc desc;
379 	u32 reserved[7];
380 } __packed;
381 
382 #define GUC_CT_POOL_SIZE	2
383 
384 struct guc_clients_info {
385 	u32 clients_num;
386 	u32 reserved0[13];
387 	u32 ct_pool_addr;
388 	u32 ct_pool_count;
389 	u32 reserved[4];
390 } __packed;
391 
392 /* GuC Additional Data Struct */
393 struct guc_ads {
394 	u32 reg_state_addr;
395 	u32 reg_state_buffer;
396 	u32 scheduler_policies;
397 	u32 gt_system_info;
398 	u32 clients_info;
399 	u32 control_data;
400 	u32 golden_context_lrca[GUC_MAX_ENGINE_CLASSES];
401 	u32 eng_state_size[GUC_MAX_ENGINE_CLASSES];
402 	u32 reserved[16];
403 } __packed;
404 
405 /* GuC logging structures */
406 
407 enum guc_log_buffer_type {
408 	GUC_ISR_LOG_BUFFER,
409 	GUC_DPC_LOG_BUFFER,
410 	GUC_CRASH_DUMP_LOG_BUFFER,
411 	GUC_MAX_LOG_BUFFER
412 };
413 
414 /**
415  * struct guc_log_buffer_state - GuC log buffer state
416  *
417  * Below state structure is used for coordination of retrieval of GuC firmware
418  * logs. Separate state is maintained for each log buffer type.
419  * read_ptr points to the location where i915 read last in log buffer and
420  * is read only for GuC firmware. write_ptr is incremented by GuC with number
421  * of bytes written for each log entry and is read only for i915.
422  * When any type of log buffer becomes half full, GuC sends a flush interrupt.
423  * GuC firmware expects that while it is writing to 2nd half of the buffer,
424  * first half would get consumed by Host and then get a flush completed
425  * acknowledgment from Host, so that it does not end up doing any overwrite
426  * causing loss of logs. So when buffer gets half filled & i915 has requested
427  * for interrupt, GuC will set flush_to_file field, set the sampled_write_ptr
428  * to the value of write_ptr and raise the interrupt.
429  * On receiving the interrupt i915 should read the buffer, clear flush_to_file
430  * field and also update read_ptr with the value of sample_write_ptr, before
431  * sending an acknowledgment to GuC. marker & version fields are for internal
432  * usage of GuC and opaque to i915. buffer_full_cnt field is incremented every
433  * time GuC detects the log buffer overflow.
434  */
435 struct guc_log_buffer_state {
436 	u32 marker[2];
437 	u32 read_ptr;
438 	u32 write_ptr;
439 	u32 size;
440 	u32 sampled_write_ptr;
441 	union {
442 		struct {
443 			u32 flush_to_file:1;
444 			u32 buffer_full_cnt:4;
445 			u32 reserved:27;
446 		};
447 		u32 flags;
448 	};
449 	u32 version;
450 } __packed;
451 
452 struct guc_ctx_report {
453 	u32 report_return_status;
454 	u32 reserved1[64];
455 	u32 affected_count;
456 	u32 reserved2[2];
457 } __packed;
458 
459 /* GuC Shared Context Data Struct */
460 struct guc_shared_ctx_data {
461 	u32 addr_of_last_preempted_data_low;
462 	u32 addr_of_last_preempted_data_high;
463 	u32 addr_of_last_preempted_data_high_tmp;
464 	u32 padding;
465 	u32 is_mapped_to_proxy;
466 	u32 proxy_ctx_id;
467 	u32 engine_reset_ctx_id;
468 	u32 media_reset_count;
469 	u32 reserved1[8];
470 	u32 uk_last_ctx_switch_reason;
471 	u32 was_reset;
472 	u32 lrca_gpu_addr;
473 	u64 execlist_ctx;
474 	u32 reserved2[66];
475 	struct guc_ctx_report preempt_ctx_report[GUC_MAX_ENGINES_NUM];
476 } __packed;
477 
478 /**
479  * DOC: MMIO based communication
480  *
481  * The MMIO based communication between Host and GuC uses software scratch
482  * registers, where first register holds data treated as message header,
483  * and other registers are used to hold message payload.
484  *
485  * For Gen9+, GuC uses software scratch registers 0xC180-0xC1B8,
486  * but no H2G command takes more than 8 parameters and the GuC FW
487  * itself uses an 8-element array to store the H2G message.
488  *
489  *      +-----------+---------+---------+---------+
490  *      |  MMIO[0]  | MMIO[1] |   ...   | MMIO[n] |
491  *      +-----------+---------+---------+---------+
492  *      | header    |      optional payload       |
493  *      +======+====+=========+=========+=========+
494  *      | 31:28|type|         |         |         |
495  *      +------+----+         |         |         |
496  *      | 27:16|data|         |         |         |
497  *      +------+----+         |         |         |
498  *      |  15:0|code|         |         |         |
499  *      +------+----+---------+---------+---------+
500  *
501  * The message header consists of:
502  *
503  * - **type**, indicates message type
504  * - **code**, indicates message code, is specific for **type**
505  * - **data**, indicates message data, optional, depends on **code**
506  *
507  * The following message **types** are supported:
508  *
509  * - **REQUEST**, indicates Host-to-GuC request, requested GuC action code
510  *   must be priovided in **code** field. Optional action specific parameters
511  *   can be provided in remaining payload registers or **data** field.
512  *
513  * - **RESPONSE**, indicates GuC-to-Host response from earlier GuC request,
514  *   action response status will be provided in **code** field. Optional
515  *   response data can be returned in remaining payload registers or **data**
516  *   field.
517  */
518 
519 #define GUC_MAX_MMIO_MSG_LEN		8
520 
521 #define INTEL_GUC_MSG_TYPE_SHIFT	28
522 #define INTEL_GUC_MSG_TYPE_MASK		(0xF << INTEL_GUC_MSG_TYPE_SHIFT)
523 #define INTEL_GUC_MSG_DATA_SHIFT	16
524 #define INTEL_GUC_MSG_DATA_MASK		(0xFFF << INTEL_GUC_MSG_DATA_SHIFT)
525 #define INTEL_GUC_MSG_CODE_SHIFT	0
526 #define INTEL_GUC_MSG_CODE_MASK		(0xFFFF << INTEL_GUC_MSG_CODE_SHIFT)
527 
528 #define __INTEL_GUC_MSG_GET(T, m) \
529 	(((m) & INTEL_GUC_MSG_ ## T ## _MASK) >> INTEL_GUC_MSG_ ## T ## _SHIFT)
530 #define INTEL_GUC_MSG_TO_TYPE(m)	__INTEL_GUC_MSG_GET(TYPE, m)
531 #define INTEL_GUC_MSG_TO_DATA(m)	__INTEL_GUC_MSG_GET(DATA, m)
532 #define INTEL_GUC_MSG_TO_CODE(m)	__INTEL_GUC_MSG_GET(CODE, m)
533 
534 enum intel_guc_msg_type {
535 	INTEL_GUC_MSG_TYPE_REQUEST = 0x0,
536 	INTEL_GUC_MSG_TYPE_RESPONSE = 0xF,
537 };
538 
539 #define __INTEL_GUC_MSG_TYPE_IS(T, m) \
540 	(INTEL_GUC_MSG_TO_TYPE(m) == INTEL_GUC_MSG_TYPE_ ## T)
541 #define INTEL_GUC_MSG_IS_REQUEST(m)	__INTEL_GUC_MSG_TYPE_IS(REQUEST, m)
542 #define INTEL_GUC_MSG_IS_RESPONSE(m)	__INTEL_GUC_MSG_TYPE_IS(RESPONSE, m)
543 
544 enum intel_guc_action {
545 	INTEL_GUC_ACTION_DEFAULT = 0x0,
546 	INTEL_GUC_ACTION_REQUEST_PREEMPTION = 0x2,
547 	INTEL_GUC_ACTION_REQUEST_ENGINE_RESET = 0x3,
548 	INTEL_GUC_ACTION_ALLOCATE_DOORBELL = 0x10,
549 	INTEL_GUC_ACTION_DEALLOCATE_DOORBELL = 0x20,
550 	INTEL_GUC_ACTION_LOG_BUFFER_FILE_FLUSH_COMPLETE = 0x30,
551 	INTEL_GUC_ACTION_FORCE_LOG_BUFFER_FLUSH = 0x302,
552 	INTEL_GUC_ACTION_ENTER_S_STATE = 0x501,
553 	INTEL_GUC_ACTION_EXIT_S_STATE = 0x502,
554 	INTEL_GUC_ACTION_SLPC_REQUEST = 0x3003,
555 	INTEL_GUC_ACTION_SAMPLE_FORCEWAKE = 0x3005,
556 	INTEL_GUC_ACTION_AUTHENTICATE_HUC = 0x4000,
557 	INTEL_GUC_ACTION_REGISTER_COMMAND_TRANSPORT_BUFFER = 0x4505,
558 	INTEL_GUC_ACTION_DEREGISTER_COMMAND_TRANSPORT_BUFFER = 0x4506,
559 	INTEL_GUC_ACTION_UK_LOG_ENABLE_LOGGING = 0x0E000,
560 	INTEL_GUC_ACTION_LIMIT
561 };
562 
563 enum intel_guc_preempt_options {
564 	INTEL_GUC_PREEMPT_OPTION_DROP_WORK_Q = 0x4,
565 	INTEL_GUC_PREEMPT_OPTION_DROP_SUBMIT_Q = 0x8,
566 };
567 
568 enum intel_guc_report_status {
569 	INTEL_GUC_REPORT_STATUS_UNKNOWN = 0x0,
570 	INTEL_GUC_REPORT_STATUS_ACKED = 0x1,
571 	INTEL_GUC_REPORT_STATUS_ERROR = 0x2,
572 	INTEL_GUC_REPORT_STATUS_COMPLETE = 0x4,
573 };
574 
575 enum intel_guc_sleep_state_status {
576 	INTEL_GUC_SLEEP_STATE_SUCCESS = 0x1,
577 	INTEL_GUC_SLEEP_STATE_PREEMPT_TO_IDLE_FAILED = 0x2,
578 	INTEL_GUC_SLEEP_STATE_ENGINE_RESET_FAILED = 0x3
579 #define INTEL_GUC_SLEEP_STATE_INVALID_MASK 0x80000000
580 };
581 
582 #define GUC_LOG_CONTROL_LOGGING_ENABLED	(1 << 0)
583 #define GUC_LOG_CONTROL_VERBOSITY_SHIFT	4
584 #define GUC_LOG_CONTROL_VERBOSITY_MASK	(0xF << GUC_LOG_CONTROL_VERBOSITY_SHIFT)
585 #define GUC_LOG_CONTROL_DEFAULT_LOGGING	(1 << 8)
586 
587 enum intel_guc_response_status {
588 	INTEL_GUC_RESPONSE_STATUS_SUCCESS = 0x0,
589 	INTEL_GUC_RESPONSE_STATUS_GENERIC_FAIL = 0xF000,
590 };
591 
592 #define INTEL_GUC_MSG_IS_RESPONSE_SUCCESS(m) \
593 	 (typecheck(u32, (m)) && \
594 	  ((m) & (INTEL_GUC_MSG_TYPE_MASK | INTEL_GUC_MSG_CODE_MASK)) == \
595 	  ((INTEL_GUC_MSG_TYPE_RESPONSE << INTEL_GUC_MSG_TYPE_SHIFT) | \
596 	   (INTEL_GUC_RESPONSE_STATUS_SUCCESS << INTEL_GUC_MSG_CODE_SHIFT)))
597 
598 /* This action will be programmed in C1BC - SOFT_SCRATCH_15_REG */
599 enum intel_guc_recv_message {
600 	INTEL_GUC_RECV_MSG_CRASH_DUMP_POSTED = BIT(1),
601 	INTEL_GUC_RECV_MSG_FLUSH_LOG_BUFFER = BIT(3)
602 };
603 
604 #endif
605