1 /*
2 * ePAPR hcall interface
3 *
4 * Copyright 2008-2011 Freescale Semiconductor, Inc.
5 *
6 * Author: Timur Tabi <timur@freescale.com>
7 *
8 * This file is provided under a dual BSD/GPL license. When using or
9 * redistributing this file, you may do so under either license.
10 *
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions are met:
13 * * Redistributions of source code must retain the above copyright
14 * notice, this list of conditions and the following disclaimer.
15 * * Redistributions in binary form must reproduce the above copyright
16 * notice, this list of conditions and the following disclaimer in the
17 * documentation and/or other materials provided with the distribution.
18 * * Neither the name of Freescale Semiconductor nor the
19 * names of its contributors may be used to endorse or promote products
20 * derived from this software without specific prior written permission.
21 *
22 *
23 * ALTERNATIVELY, this software may be distributed under the terms of the
24 * GNU General Public License ("GPL") as published by the Free Software
25 * Foundation, either version 2 of that License or (at your option) any
26 * later version.
27 *
28 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
29 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
30 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
31 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
32 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
33 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
34 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
35 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
36 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
37 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
38 */
39
40 /* A "hypercall" is an "sc 1" instruction. This header file file provides C
41 * wrapper functions for the ePAPR hypervisor interface. It is inteded
42 * for use by Linux device drivers and other operating systems.
43 *
44 * The hypercalls are implemented as inline assembly, rather than assembly
45 * language functions in a .S file, for optimization. It allows
46 * the caller to issue the hypercall instruction directly, improving both
47 * performance and memory footprint.
48 */
49
50 #ifndef _EPAPR_HCALLS_H
51 #define _EPAPR_HCALLS_H
52
53 #include <uapi/asm/epapr_hcalls.h>
54
55 #ifndef __ASSEMBLY__
56 #include <linux/types.h>
57 #include <linux/errno.h>
58 #include <asm/byteorder.h>
59
60 /*
61 * Hypercall register clobber list
62 *
63 * These macros are used to define the list of clobbered registers during a
64 * hypercall. Technically, registers r0 and r3-r12 are always clobbered,
65 * but the gcc inline assembly syntax does not allow us to specify registers
66 * on the clobber list that are also on the input/output list. Therefore,
67 * the lists of clobbered registers depends on the number of register
68 * parmeters ("+r" and "=r") passed to the hypercall.
69 *
70 * Each assembly block should use one of the HCALL_CLOBBERSx macros. As a
71 * general rule, 'x' is the number of parameters passed to the assembly
72 * block *except* for r11.
73 *
74 * If you're not sure, just use the smallest value of 'x' that does not
75 * generate a compilation error. Because these are static inline functions,
76 * the compiler will only check the clobber list for a function if you
77 * compile code that calls that function.
78 *
79 * r3 and r11 are not included in any clobbers list because they are always
80 * listed as output registers.
81 *
82 * XER, CTR, and LR are currently listed as clobbers because it's uncertain
83 * whether they will be clobbered.
84 *
85 * Note that r11 can be used as an output parameter.
86 *
87 * The "memory" clobber is only necessary for hcalls where the Hypervisor
88 * will read or write guest memory. However, we add it to all hcalls because
89 * the impact is minimal, and we want to ensure that it's present for the
90 * hcalls that need it.
91 */
92
93 /* List of common clobbered registers. Do not use this macro. */
94 #define EV_HCALL_CLOBBERS "r0", "r12", "xer", "ctr", "lr", "cc", "memory"
95
96 #define EV_HCALL_CLOBBERS8 EV_HCALL_CLOBBERS
97 #define EV_HCALL_CLOBBERS7 EV_HCALL_CLOBBERS8, "r10"
98 #define EV_HCALL_CLOBBERS6 EV_HCALL_CLOBBERS7, "r9"
99 #define EV_HCALL_CLOBBERS5 EV_HCALL_CLOBBERS6, "r8"
100 #define EV_HCALL_CLOBBERS4 EV_HCALL_CLOBBERS5, "r7"
101 #define EV_HCALL_CLOBBERS3 EV_HCALL_CLOBBERS4, "r6"
102 #define EV_HCALL_CLOBBERS2 EV_HCALL_CLOBBERS3, "r5"
103 #define EV_HCALL_CLOBBERS1 EV_HCALL_CLOBBERS2, "r4"
104
105 extern bool epapr_paravirt_enabled;
106 extern u32 epapr_hypercall_start[];
107
108 #ifdef CONFIG_EPAPR_PARAVIRT
109 int __init epapr_paravirt_early_init(void);
110 #else
epapr_paravirt_early_init(void)111 static inline int epapr_paravirt_early_init(void) { return 0; }
112 #endif
113
114 /*
115 * We use "uintptr_t" to define a register because it's guaranteed to be a
116 * 32-bit integer on a 32-bit platform, and a 64-bit integer on a 64-bit
117 * platform.
118 *
119 * All registers are either input/output or output only. Registers that are
120 * initialized before making the hypercall are input/output. All
121 * input/output registers are represented with "+r". Output-only registers
122 * are represented with "=r". Do not specify any unused registers. The
123 * clobber list will tell the compiler that the hypercall modifies those
124 * registers, which is good enough.
125 */
126
127 /**
128 * ev_int_set_config - configure the specified interrupt
129 * @interrupt: the interrupt number
130 * @config: configuration for this interrupt
131 * @priority: interrupt priority
132 * @destination: destination CPU number
133 *
134 * Returns 0 for success, or an error code.
135 */
ev_int_set_config(unsigned int interrupt,uint32_t config,unsigned int priority,uint32_t destination)136 static inline unsigned int ev_int_set_config(unsigned int interrupt,
137 uint32_t config, unsigned int priority, uint32_t destination)
138 {
139 register uintptr_t r11 __asm__("r11");
140 register uintptr_t r3 __asm__("r3");
141 register uintptr_t r4 __asm__("r4");
142 register uintptr_t r5 __asm__("r5");
143 register uintptr_t r6 __asm__("r6");
144
145 r11 = EV_HCALL_TOKEN(EV_INT_SET_CONFIG);
146 r3 = interrupt;
147 r4 = config;
148 r5 = priority;
149 r6 = destination;
150
151 asm volatile("bl epapr_hypercall_start"
152 : "+r" (r11), "+r" (r3), "+r" (r4), "+r" (r5), "+r" (r6)
153 : : EV_HCALL_CLOBBERS4
154 );
155
156 return r3;
157 }
158
159 /**
160 * ev_int_get_config - return the config of the specified interrupt
161 * @interrupt: the interrupt number
162 * @config: returned configuration for this interrupt
163 * @priority: returned interrupt priority
164 * @destination: returned destination CPU number
165 *
166 * Returns 0 for success, or an error code.
167 */
ev_int_get_config(unsigned int interrupt,uint32_t * config,unsigned int * priority,uint32_t * destination)168 static inline unsigned int ev_int_get_config(unsigned int interrupt,
169 uint32_t *config, unsigned int *priority, uint32_t *destination)
170 {
171 register uintptr_t r11 __asm__("r11");
172 register uintptr_t r3 __asm__("r3");
173 register uintptr_t r4 __asm__("r4");
174 register uintptr_t r5 __asm__("r5");
175 register uintptr_t r6 __asm__("r6");
176
177 r11 = EV_HCALL_TOKEN(EV_INT_GET_CONFIG);
178 r3 = interrupt;
179
180 asm volatile("bl epapr_hypercall_start"
181 : "+r" (r11), "+r" (r3), "=r" (r4), "=r" (r5), "=r" (r6)
182 : : EV_HCALL_CLOBBERS4
183 );
184
185 *config = r4;
186 *priority = r5;
187 *destination = r6;
188
189 return r3;
190 }
191
192 /**
193 * ev_int_set_mask - sets the mask for the specified interrupt source
194 * @interrupt: the interrupt number
195 * @mask: 0=enable interrupts, 1=disable interrupts
196 *
197 * Returns 0 for success, or an error code.
198 */
ev_int_set_mask(unsigned int interrupt,unsigned int mask)199 static inline unsigned int ev_int_set_mask(unsigned int interrupt,
200 unsigned int mask)
201 {
202 register uintptr_t r11 __asm__("r11");
203 register uintptr_t r3 __asm__("r3");
204 register uintptr_t r4 __asm__("r4");
205
206 r11 = EV_HCALL_TOKEN(EV_INT_SET_MASK);
207 r3 = interrupt;
208 r4 = mask;
209
210 asm volatile("bl epapr_hypercall_start"
211 : "+r" (r11), "+r" (r3), "+r" (r4)
212 : : EV_HCALL_CLOBBERS2
213 );
214
215 return r3;
216 }
217
218 /**
219 * ev_int_get_mask - returns the mask for the specified interrupt source
220 * @interrupt: the interrupt number
221 * @mask: returned mask for this interrupt (0=enabled, 1=disabled)
222 *
223 * Returns 0 for success, or an error code.
224 */
ev_int_get_mask(unsigned int interrupt,unsigned int * mask)225 static inline unsigned int ev_int_get_mask(unsigned int interrupt,
226 unsigned int *mask)
227 {
228 register uintptr_t r11 __asm__("r11");
229 register uintptr_t r3 __asm__("r3");
230 register uintptr_t r4 __asm__("r4");
231
232 r11 = EV_HCALL_TOKEN(EV_INT_GET_MASK);
233 r3 = interrupt;
234
235 asm volatile("bl epapr_hypercall_start"
236 : "+r" (r11), "+r" (r3), "=r" (r4)
237 : : EV_HCALL_CLOBBERS2
238 );
239
240 *mask = r4;
241
242 return r3;
243 }
244
245 /**
246 * ev_int_eoi - signal the end of interrupt processing
247 * @interrupt: the interrupt number
248 *
249 * This function signals the end of processing for the the specified
250 * interrupt, which must be the interrupt currently in service. By
251 * definition, this is also the highest-priority interrupt.
252 *
253 * Returns 0 for success, or an error code.
254 */
ev_int_eoi(unsigned int interrupt)255 static inline unsigned int ev_int_eoi(unsigned int interrupt)
256 {
257 register uintptr_t r11 __asm__("r11");
258 register uintptr_t r3 __asm__("r3");
259
260 r11 = EV_HCALL_TOKEN(EV_INT_EOI);
261 r3 = interrupt;
262
263 asm volatile("bl epapr_hypercall_start"
264 : "+r" (r11), "+r" (r3)
265 : : EV_HCALL_CLOBBERS1
266 );
267
268 return r3;
269 }
270
271 /**
272 * ev_byte_channel_send - send characters to a byte stream
273 * @handle: byte stream handle
274 * @count: (input) num of chars to send, (output) num chars sent
275 * @buffer: pointer to a 16-byte buffer
276 *
277 * @buffer must be at least 16 bytes long, because all 16 bytes will be
278 * read from memory into registers, even if count < 16.
279 *
280 * Returns 0 for success, or an error code.
281 */
ev_byte_channel_send(unsigned int handle,unsigned int * count,const char buffer[EV_BYTE_CHANNEL_MAX_BYTES])282 static inline unsigned int ev_byte_channel_send(unsigned int handle,
283 unsigned int *count, const char buffer[EV_BYTE_CHANNEL_MAX_BYTES])
284 {
285 register uintptr_t r11 __asm__("r11");
286 register uintptr_t r3 __asm__("r3");
287 register uintptr_t r4 __asm__("r4");
288 register uintptr_t r5 __asm__("r5");
289 register uintptr_t r6 __asm__("r6");
290 register uintptr_t r7 __asm__("r7");
291 register uintptr_t r8 __asm__("r8");
292 const uint32_t *p = (const uint32_t *) buffer;
293
294 r11 = EV_HCALL_TOKEN(EV_BYTE_CHANNEL_SEND);
295 r3 = handle;
296 r4 = *count;
297 r5 = be32_to_cpu(p[0]);
298 r6 = be32_to_cpu(p[1]);
299 r7 = be32_to_cpu(p[2]);
300 r8 = be32_to_cpu(p[3]);
301
302 asm volatile("bl epapr_hypercall_start"
303 : "+r" (r11), "+r" (r3),
304 "+r" (r4), "+r" (r5), "+r" (r6), "+r" (r7), "+r" (r8)
305 : : EV_HCALL_CLOBBERS6
306 );
307
308 *count = r4;
309
310 return r3;
311 }
312
313 /**
314 * ev_byte_channel_receive - fetch characters from a byte channel
315 * @handle: byte channel handle
316 * @count: (input) max num of chars to receive, (output) num chars received
317 * @buffer: pointer to a 16-byte buffer
318 *
319 * The size of @buffer must be at least 16 bytes, even if you request fewer
320 * than 16 characters, because we always write 16 bytes to @buffer. This is
321 * for performance reasons.
322 *
323 * Returns 0 for success, or an error code.
324 */
ev_byte_channel_receive(unsigned int handle,unsigned int * count,char buffer[EV_BYTE_CHANNEL_MAX_BYTES])325 static inline unsigned int ev_byte_channel_receive(unsigned int handle,
326 unsigned int *count, char buffer[EV_BYTE_CHANNEL_MAX_BYTES])
327 {
328 register uintptr_t r11 __asm__("r11");
329 register uintptr_t r3 __asm__("r3");
330 register uintptr_t r4 __asm__("r4");
331 register uintptr_t r5 __asm__("r5");
332 register uintptr_t r6 __asm__("r6");
333 register uintptr_t r7 __asm__("r7");
334 register uintptr_t r8 __asm__("r8");
335 uint32_t *p = (uint32_t *) buffer;
336
337 r11 = EV_HCALL_TOKEN(EV_BYTE_CHANNEL_RECEIVE);
338 r3 = handle;
339 r4 = *count;
340
341 asm volatile("bl epapr_hypercall_start"
342 : "+r" (r11), "+r" (r3), "+r" (r4),
343 "=r" (r5), "=r" (r6), "=r" (r7), "=r" (r8)
344 : : EV_HCALL_CLOBBERS6
345 );
346
347 *count = r4;
348 p[0] = cpu_to_be32(r5);
349 p[1] = cpu_to_be32(r6);
350 p[2] = cpu_to_be32(r7);
351 p[3] = cpu_to_be32(r8);
352
353 return r3;
354 }
355
356 /**
357 * ev_byte_channel_poll - returns the status of the byte channel buffers
358 * @handle: byte channel handle
359 * @rx_count: returned count of bytes in receive queue
360 * @tx_count: returned count of free space in transmit queue
361 *
362 * This function reports the amount of data in the receive queue (i.e. the
363 * number of bytes you can read), and the amount of free space in the transmit
364 * queue (i.e. the number of bytes you can write).
365 *
366 * Returns 0 for success, or an error code.
367 */
ev_byte_channel_poll(unsigned int handle,unsigned int * rx_count,unsigned int * tx_count)368 static inline unsigned int ev_byte_channel_poll(unsigned int handle,
369 unsigned int *rx_count, unsigned int *tx_count)
370 {
371 register uintptr_t r11 __asm__("r11");
372 register uintptr_t r3 __asm__("r3");
373 register uintptr_t r4 __asm__("r4");
374 register uintptr_t r5 __asm__("r5");
375
376 r11 = EV_HCALL_TOKEN(EV_BYTE_CHANNEL_POLL);
377 r3 = handle;
378
379 asm volatile("bl epapr_hypercall_start"
380 : "+r" (r11), "+r" (r3), "=r" (r4), "=r" (r5)
381 : : EV_HCALL_CLOBBERS3
382 );
383
384 *rx_count = r4;
385 *tx_count = r5;
386
387 return r3;
388 }
389
390 /**
391 * ev_int_iack - acknowledge an interrupt
392 * @handle: handle to the target interrupt controller
393 * @vector: returned interrupt vector
394 *
395 * If handle is zero, the function returns the next interrupt source
396 * number to be handled irrespective of the hierarchy or cascading
397 * of interrupt controllers. If non-zero, specifies a handle to the
398 * interrupt controller that is the target of the acknowledge.
399 *
400 * Returns 0 for success, or an error code.
401 */
ev_int_iack(unsigned int handle,unsigned int * vector)402 static inline unsigned int ev_int_iack(unsigned int handle,
403 unsigned int *vector)
404 {
405 register uintptr_t r11 __asm__("r11");
406 register uintptr_t r3 __asm__("r3");
407 register uintptr_t r4 __asm__("r4");
408
409 r11 = EV_HCALL_TOKEN(EV_INT_IACK);
410 r3 = handle;
411
412 asm volatile("bl epapr_hypercall_start"
413 : "+r" (r11), "+r" (r3), "=r" (r4)
414 : : EV_HCALL_CLOBBERS2
415 );
416
417 *vector = r4;
418
419 return r3;
420 }
421
422 /**
423 * ev_doorbell_send - send a doorbell to another partition
424 * @handle: doorbell send handle
425 *
426 * Returns 0 for success, or an error code.
427 */
ev_doorbell_send(unsigned int handle)428 static inline unsigned int ev_doorbell_send(unsigned int handle)
429 {
430 register uintptr_t r11 __asm__("r11");
431 register uintptr_t r3 __asm__("r3");
432
433 r11 = EV_HCALL_TOKEN(EV_DOORBELL_SEND);
434 r3 = handle;
435
436 asm volatile("bl epapr_hypercall_start"
437 : "+r" (r11), "+r" (r3)
438 : : EV_HCALL_CLOBBERS1
439 );
440
441 return r3;
442 }
443
444 /**
445 * ev_idle -- wait for next interrupt on this core
446 *
447 * Returns 0 for success, or an error code.
448 */
ev_idle(void)449 static inline unsigned int ev_idle(void)
450 {
451 register uintptr_t r11 __asm__("r11");
452 register uintptr_t r3 __asm__("r3");
453
454 r11 = EV_HCALL_TOKEN(EV_IDLE);
455
456 asm volatile("bl epapr_hypercall_start"
457 : "+r" (r11), "=r" (r3)
458 : : EV_HCALL_CLOBBERS1
459 );
460
461 return r3;
462 }
463
464 #ifdef CONFIG_EPAPR_PARAVIRT
epapr_hypercall(unsigned long * in,unsigned long * out,unsigned long nr)465 static inline unsigned long epapr_hypercall(unsigned long *in,
466 unsigned long *out,
467 unsigned long nr)
468 {
469 register unsigned long r0 asm("r0");
470 register unsigned long r3 asm("r3") = in[0];
471 register unsigned long r4 asm("r4") = in[1];
472 register unsigned long r5 asm("r5") = in[2];
473 register unsigned long r6 asm("r6") = in[3];
474 register unsigned long r7 asm("r7") = in[4];
475 register unsigned long r8 asm("r8") = in[5];
476 register unsigned long r9 asm("r9") = in[6];
477 register unsigned long r10 asm("r10") = in[7];
478 register unsigned long r11 asm("r11") = nr;
479 register unsigned long r12 asm("r12");
480
481 asm volatile("bl epapr_hypercall_start"
482 : "=r"(r0), "=r"(r3), "=r"(r4), "=r"(r5), "=r"(r6),
483 "=r"(r7), "=r"(r8), "=r"(r9), "=r"(r10), "=r"(r11),
484 "=r"(r12)
485 : "r"(r3), "r"(r4), "r"(r5), "r"(r6), "r"(r7), "r"(r8),
486 "r"(r9), "r"(r10), "r"(r11)
487 : "memory", "cc", "xer", "ctr", "lr");
488
489 out[0] = r4;
490 out[1] = r5;
491 out[2] = r6;
492 out[3] = r7;
493 out[4] = r8;
494 out[5] = r9;
495 out[6] = r10;
496 out[7] = r11;
497
498 return r3;
499 }
500 #else
epapr_hypercall(unsigned long * in,unsigned long * out,unsigned long nr)501 static unsigned long epapr_hypercall(unsigned long *in,
502 unsigned long *out,
503 unsigned long nr)
504 {
505 return EV_UNIMPLEMENTED;
506 }
507 #endif
508
epapr_hypercall0_1(unsigned int nr,unsigned long * r2)509 static inline long epapr_hypercall0_1(unsigned int nr, unsigned long *r2)
510 {
511 unsigned long in[8] = {0};
512 unsigned long out[8];
513 unsigned long r;
514
515 r = epapr_hypercall(in, out, nr);
516 *r2 = out[0];
517
518 return r;
519 }
520
epapr_hypercall0(unsigned int nr)521 static inline long epapr_hypercall0(unsigned int nr)
522 {
523 unsigned long in[8] = {0};
524 unsigned long out[8];
525
526 return epapr_hypercall(in, out, nr);
527 }
528
epapr_hypercall1(unsigned int nr,unsigned long p1)529 static inline long epapr_hypercall1(unsigned int nr, unsigned long p1)
530 {
531 unsigned long in[8] = {0};
532 unsigned long out[8];
533
534 in[0] = p1;
535 return epapr_hypercall(in, out, nr);
536 }
537
epapr_hypercall2(unsigned int nr,unsigned long p1,unsigned long p2)538 static inline long epapr_hypercall2(unsigned int nr, unsigned long p1,
539 unsigned long p2)
540 {
541 unsigned long in[8] = {0};
542 unsigned long out[8];
543
544 in[0] = p1;
545 in[1] = p2;
546 return epapr_hypercall(in, out, nr);
547 }
548
epapr_hypercall3(unsigned int nr,unsigned long p1,unsigned long p2,unsigned long p3)549 static inline long epapr_hypercall3(unsigned int nr, unsigned long p1,
550 unsigned long p2, unsigned long p3)
551 {
552 unsigned long in[8] = {0};
553 unsigned long out[8];
554
555 in[0] = p1;
556 in[1] = p2;
557 in[2] = p3;
558 return epapr_hypercall(in, out, nr);
559 }
560
epapr_hypercall4(unsigned int nr,unsigned long p1,unsigned long p2,unsigned long p3,unsigned long p4)561 static inline long epapr_hypercall4(unsigned int nr, unsigned long p1,
562 unsigned long p2, unsigned long p3,
563 unsigned long p4)
564 {
565 unsigned long in[8] = {0};
566 unsigned long out[8];
567
568 in[0] = p1;
569 in[1] = p2;
570 in[2] = p3;
571 in[3] = p4;
572 return epapr_hypercall(in, out, nr);
573 }
574 #endif /* !__ASSEMBLY__ */
575 #endif /* _EPAPR_HCALLS_H */
576
