1# SPDX-License-Identifier: GPL-2.0-only
2#
3# 8390 device configuration
4#
5
6config NET_VENDOR_8390
7	bool "National Semiconductor 8390 devices"
8	default y
9	depends on NET_VENDOR_NATSEMI
10	---help---
11	  If you have a network (Ethernet) card belonging to this class, say Y.
12
13	  Note that the answer to this question doesn't directly affect the
14	  kernel: saying N will just cause the configurator to skip all
15	  the questions about National Semiconductor 8390 cards. If you say Y,
16	  you will be asked for your specific card in the following questions.
17
18if NET_VENDOR_8390
19
20config PCMCIA_AXNET
21	tristate "Asix AX88190 PCMCIA support"
22	depends on PCMCIA
23	---help---
24	  Say Y here if you intend to attach an Asix AX88190-based PCMCIA
25	  (PC-card) Fast Ethernet card to your computer.  These cards are
26	  nearly NE2000 compatible but need a separate driver due to a few
27	  misfeatures.
28
29	  To compile this driver as a module, choose M here: the module will be
30	  called axnet_cs.  If unsure, say N.
31
32config AX88796
33	tristate "ASIX AX88796 NE2000 clone support" if !ZORRO
34	depends on (ARM || MIPS || SUPERH || ZORRO || COMPILE_TEST)
35	select CRC32
36	select PHYLIB
37	select MDIO_BITBANG
38	---help---
39	  AX88796 driver, using platform bus to provide
40	  chip detection and resources
41
42config AX88796_93CX6
43	bool "ASIX AX88796 external 93CX6 eeprom support"
44	depends on AX88796
45	select EEPROM_93CX6
46	---help---
47	  Select this if your platform comes with an external 93CX6 eeprom.
48
49config XSURF100
50	tristate "Amiga XSurf 100 AX88796/NE2000 clone support"
51	depends on ZORRO
52	select AX88796
53	select AX88796B_PHY
54	help
55	  This driver is for the Individual Computers X-Surf 100 Ethernet
56	  card (based on the Asix AX88796 chip). If you have such a card,
57	  say Y. Otherwise, say N.
58
59	  To compile this driver as a module, choose M here: the module
60	  will be called xsurf100.
61
62config HYDRA
63	tristate "Hydra support"
64	depends on ZORRO
65	select CRC32
66	---help---
67	  If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
68
69	  To compile this driver as a module, choose M here: the module
70	  will be called hydra.
71
72config ARM_ETHERH
73	tristate "I-cubed EtherH/ANT EtherM support"
74	depends on ARM && ARCH_ACORN
75	select CRC32
76	---help---
77	  If you have an Acorn system with one of these network cards, you
78	  should say Y to this option if you wish to use it with Linux.
79
80config MAC8390
81	tristate "Macintosh NS 8390 based ethernet cards"
82	depends on MAC
83	select CRC32
84	---help---
85	  If you want to include a driver to support Nubus or LC-PDS
86	  Ethernet cards using an NS8390 chipset or its equivalent, say Y.
87
88config MCF8390
89	tristate "ColdFire NS8390 based Ethernet support"
90	depends on COLDFIRE
91	select CRC32
92	---help---
93	  This driver is for Ethernet devices using an NS8390-compatible
94	  chipset on many common ColdFire CPU based boards. Many of the older
95	  Freescale dev boards use this, and some other common boards like
96	  some SnapGear routers do as well.
97
98	  If you have one of these boards and want to use the network interface
99	  on them then choose Y. To compile this driver as a module, choose M
100	  here, the module will be called mcf8390.
101
102config NE2000
103	tristate "NE2000/NE1000 support"
104	depends on (ISA || (Q40 && m) || MACH_TX49XX || ATARI_ETHERNEC)
105	select CRC32
106	---help---
107	  If you have a network (Ethernet) card of this type, say Y here.
108	  Many Ethernet cards without a specific driver are compatible with
109	  the NE2000.
110
111	  If you have a PCI NE2000 card however, say N here and Y to "PCI
112	  NE2000 and clone support" below.
113
114	  To compile this driver as a module, choose M here. The module
115	  will be called ne.
116
117config NE2K_PCI
118	tristate "PCI NE2000 and clones support (see help)"
119	depends on PCI
120	select CRC32
121	---help---
122	  This driver is for NE2000 compatible PCI cards. It will not work
123	  with ISA NE2000 cards (they have their own driver, "NE2000/NE1000
124	  support" below). If you have a PCI NE2000 network (Ethernet) card,
125	  say Y here.
126
127	  This driver also works for the following NE2000 clone cards:
128	  RealTek RTL-8029  Winbond 89C940  Compex RL2000  KTI ET32P2
129	  NetVin NV5000SC   Via 86C926      SureCom NE34   Winbond
130	  Holtek HT80232    Holtek HT80229
131
132	  To compile this driver as a module, choose M here. The module
133	  will be called ne2k-pci.
134
135config APNE
136	tristate "PCMCIA NE2000 support"
137	depends on AMIGA_PCMCIA
138	select CRC32
139	---help---
140	  If you have a PCMCIA NE2000 compatible adapter, say Y.  Otherwise,
141	  say N.
142
143	  To compile this driver as a module, choose M here: the module
144	  will be called apne.
145
146config PCMCIA_PCNET
147	tristate "NE2000 compatible PCMCIA support"
148	depends on PCMCIA
149	select CRC32
150	---help---
151	  Say Y here if you intend to attach an NE2000 compatible PCMCIA
152	  (PC-card) Ethernet or Fast Ethernet card to your computer.
153
154	  To compile this driver as a module, choose M here: the module will be
155	  called pcnet_cs.  If unsure, say N.
156
157config STNIC
158	tristate "National DP83902AV  support"
159	depends on SUPERH
160	select CRC32
161	---help---
162	  Support for cards based on the National Semiconductor DP83902AV
163	  ST-NIC Serial Network Interface Controller for Twisted Pair.  This
164	  is a 10Mbit/sec Ethernet controller.  Product overview and specs at
165	  <http://www.national.com/pf/DP/DP83902A.html>.
166
167	  If unsure, say N.
168
169config ULTRA
170	tristate "SMC Ultra support"
171	depends on ISA
172	select CRC32
173	---help---
174	  If you have a network (Ethernet) card of this type, say Y here.
175
176	  Important: There have been many reports that, with some motherboards
177	  mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible,
178	  such as some BusLogic models) causes corruption problems with many
179	  operating systems. The Linux smc-ultra driver has a work-around for
180	  this but keep it in mind if you have such a SCSI card and have
181	  problems.
182
183	  To compile this driver as a module, choose M here. The module
184	  will be called smc-ultra.
185
186config WD80x3
187	tristate "WD80*3 support"
188	depends on ISA
189	select CRC32
190	---help---
191	  If you have a network (Ethernet) card of this type, say Y here.
192
193	  To compile this driver as a module, choose M here. The module
194	  will be called wd.
195
196config ZORRO8390
197	tristate "Zorro NS8390-based Ethernet support"
198	depends on ZORRO
199	select CRC32
200	---help---
201	  This driver is for Zorro Ethernet cards using an NS8390-compatible
202	  chipset, like the Village Tronic Ariadne II and the Individual
203	  Computers X-Surf Ethernet cards. If you have such a card, say Y.
204	  Otherwise, say N.
205
206	  To compile this driver as a module, choose M here: the module
207	  will be called zorro8390.
208
209endif # NET_VENDOR_8390
210