1# SPDX-License-Identifier: GPL-2.0 2# 3# Block device driver configuration 4# 5 6menuconfig BLK_DEV 7 bool "Block devices" 8 depends on BLOCK 9 default y 10 help 11 Say Y here to get to see options for various different block device 12 drivers. This option alone does not add any kernel code. 13 14 If you say N, all options in this submenu will be skipped and disabled; 15 only do this if you know what you are doing. 16 17if BLK_DEV 18 19source "drivers/block/null_blk/Kconfig" 20 21config BLK_DEV_FD 22 tristate "Normal floppy disk support" 23 depends on ARCH_MAY_HAVE_PC_FDC 24 help 25 If you want to use the floppy disk drive(s) of your PC under Linux, 26 say Y. Information about this driver, especially important for IBM 27 Thinkpad users, is contained in 28 <file:Documentation/admin-guide/blockdev/floppy.rst>. 29 That file also contains the location of the Floppy driver FAQ as 30 well as location of the fdutils package used to configure additional 31 parameters of the driver at run time. 32 33 To compile this driver as a module, choose M here: the 34 module will be called floppy. 35 36config AMIGA_FLOPPY 37 tristate "Amiga floppy support" 38 depends on AMIGA 39 40config ATARI_FLOPPY 41 tristate "Atari floppy support" 42 depends on ATARI 43 44config MAC_FLOPPY 45 tristate "Support for PowerMac floppy" 46 depends on PPC_PMAC && !PPC_PMAC64 47 help 48 If you have a SWIM-3 (Super Woz Integrated Machine 3; from Apple) 49 floppy controller, say Y here. Most commonly found in PowerMacs. 50 51config BLK_DEV_SWIM 52 tristate "Support for SWIM Macintosh floppy" 53 depends on M68K && MAC && !HIGHMEM 54 help 55 You should select this option if you want floppy support 56 and you don't have a II, IIfx, Q900, Q950 or AV series. 57 58config AMIGA_Z2RAM 59 tristate "Amiga Zorro II ramdisk support" 60 depends on ZORRO 61 help 62 This enables support for using Chip RAM and Zorro II RAM as a 63 ramdisk or as a swap partition. Say Y if you want to include this 64 driver in the kernel. 65 66 To compile this driver as a module, choose M here: the 67 module will be called z2ram. 68 69config N64CART 70 bool "N64 cart support" 71 depends on MACH_NINTENDO64 72 help 73 Support for the N64 cart. 74 75config CDROM 76 tristate 77 78config GDROM 79 tristate "SEGA Dreamcast GD-ROM drive" 80 depends on SH_DREAMCAST 81 select CDROM 82 help 83 A standard SEGA Dreamcast comes with a modified CD ROM drive called a 84 "GD-ROM" by SEGA to signify it is capable of reading special disks 85 with up to 1 GB of data. This drive will also read standard CD ROM 86 disks. Select this option to access any disks in your GD ROM drive. 87 Most users will want to say "Y" here. 88 You can also build this as a module which will be called gdrom. 89 90config PARIDE 91 tristate "Parallel port IDE device support" 92 depends on PARPORT_PC 93 help 94 There are many external CD-ROM and disk devices that connect through 95 your computer's parallel port. Most of them are actually IDE devices 96 using a parallel port IDE adapter. This option enables the PARIDE 97 subsystem which contains drivers for many of these external drives. 98 Read <file:Documentation/admin-guide/blockdev/paride.rst> for more information. 99 100 If you have said Y to the "Parallel-port support" configuration 101 option, you may share a single port between your printer and other 102 parallel port devices. Answer Y to build PARIDE support into your 103 kernel, or M if you would like to build it as a loadable module. If 104 your parallel port support is in a loadable module, you must build 105 PARIDE as a module. If you built PARIDE support into your kernel, 106 you may still build the individual protocol modules and high-level 107 drivers as loadable modules. If you build this support as a module, 108 it will be called paride. 109 110 To use the PARIDE support, you must say Y or M here and also to at 111 least one high-level driver (e.g. "Parallel port IDE disks", 112 "Parallel port ATAPI CD-ROMs", "Parallel port ATAPI disks" etc.) and 113 to at least one protocol driver (e.g. "ATEN EH-100 protocol", 114 "MicroSolutions backpack protocol", "DataStor Commuter protocol" 115 etc.). 116 117source "drivers/block/paride/Kconfig" 118 119source "drivers/block/mtip32xx/Kconfig" 120 121source "drivers/block/zram/Kconfig" 122 123config BLK_DEV_UBD 124 bool "Virtual block device" 125 depends on UML 126 help 127 The User-Mode Linux port includes a driver called UBD which will let 128 you access arbitrary files on the host computer as block devices. 129 Unless you know that you do not need such virtual block devices say 130 Y here. 131 132config BLK_DEV_UBD_SYNC 133 bool "Always do synchronous disk IO for UBD" 134 depends on BLK_DEV_UBD 135 help 136 Writes to the virtual block device are not immediately written to the 137 host's disk; this may cause problems if, for example, the User-Mode 138 Linux 'Virtual Machine' uses a journalling filesystem and the host 139 computer crashes. 140 141 Synchronous operation (i.e. always writing data to the host's disk 142 immediately) is configurable on a per-UBD basis by using a special 143 kernel command line option. Alternatively, you can say Y here to 144 turn on synchronous operation by default for all block devices. 145 146 If you're running a journalling file system (like reiserfs, for 147 example) in your virtual machine, you will want to say Y here. If 148 you care for the safety of the data in your virtual machine, Y is a 149 wise choice too. In all other cases (for example, if you're just 150 playing around with User-Mode Linux) you can choose N. 151 152config BLK_DEV_COW_COMMON 153 bool 154 default BLK_DEV_UBD 155 156config BLK_DEV_LOOP 157 tristate "Loopback device support" 158 help 159 Saying Y here will allow you to use a regular file as a block 160 device; you can then create a file system on that block device and 161 mount it just as you would mount other block devices such as hard 162 drive partitions, CD-ROM drives or floppy drives. The loop devices 163 are block special device files with major number 7 and typically 164 called /dev/loop0, /dev/loop1 etc. 165 166 This is useful if you want to check an ISO 9660 file system before 167 burning the CD, or if you want to use floppy images without first 168 writing them to floppy. Furthermore, some Linux distributions avoid 169 the need for a dedicated Linux partition by keeping their complete 170 root file system inside a DOS FAT file using this loop device 171 driver. 172 173 To use the loop device, you need the losetup utility, found in the 174 util-linux package, see 175 <https://www.kernel.org/pub/linux/utils/util-linux/>. 176 177 The loop device driver can also be used to "hide" a file system in 178 a disk partition, floppy, or regular file, either using encryption 179 (scrambling the data) or steganography (hiding the data in the low 180 bits of, say, a sound file). This is also safe if the file resides 181 on a remote file server. 182 183 There are several ways of encrypting disks. Some of these require 184 kernel patches. The vanilla kernel offers the cryptoloop option 185 and a Device Mapper target (which is superior, as it supports all 186 file systems). If you want to use the cryptoloop, say Y to both 187 LOOP and CRYPTOLOOP, and make sure you have a recent (version 2.12 188 or later) version of util-linux. Additionally, be aware that 189 the cryptoloop is not safe for storing journaled filesystems. 190 191 Note that this loop device has nothing to do with the loopback 192 device used for network connections from the machine to itself. 193 194 To compile this driver as a module, choose M here: the 195 module will be called loop. 196 197 Most users will answer N here. 198 199config BLK_DEV_LOOP_MIN_COUNT 200 int "Number of loop devices to pre-create at init time" 201 depends on BLK_DEV_LOOP 202 default 8 203 help 204 Static number of loop devices to be unconditionally pre-created 205 at init time. 206 207 This default value can be overwritten on the kernel command 208 line or with module-parameter loop.max_loop. 209 210 The historic default is 8. If a late 2011 version of losetup(8) 211 is used, it can be set to 0, since needed loop devices can be 212 dynamically allocated with the /dev/loop-control interface. 213 214config BLK_DEV_CRYPTOLOOP 215 tristate "Cryptoloop Support (DEPRECATED)" 216 select CRYPTO 217 select CRYPTO_CBC 218 depends on BLK_DEV_LOOP 219 help 220 Say Y here if you want to be able to use the ciphers that are 221 provided by the CryptoAPI as loop transformation. This might be 222 used as hard disk encryption. 223 224 WARNING: This device is not safe for journaled file systems like 225 ext3 or Reiserfs. Please use the Device Mapper crypto module 226 instead, which can be configured to be on-disk compatible with the 227 cryptoloop device. cryptoloop support will be removed in Linux 5.16. 228 229source "drivers/block/drbd/Kconfig" 230 231config BLK_DEV_NBD 232 tristate "Network block device support" 233 depends on NET 234 help 235 Saying Y here will allow your computer to be a client for network 236 block devices, i.e. it will be able to use block devices exported by 237 servers (mount file systems on them etc.). Communication between 238 client and server works over TCP/IP networking, but to the client 239 program this is hidden: it looks like a regular local file access to 240 a block device special file such as /dev/nd0. 241 242 Network block devices also allows you to run a block-device in 243 userland (making server and client physically the same computer, 244 communicating using the loopback network device). 245 246 Read <file:Documentation/admin-guide/blockdev/nbd.rst> for more information, 247 especially about where to find the server code, which runs in user 248 space and does not need special kernel support. 249 250 Note that this has nothing to do with the network file systems NFS 251 or Coda; you can say N here even if you intend to use NFS or Coda. 252 253 To compile this driver as a module, choose M here: the 254 module will be called nbd. 255 256 If unsure, say N. 257 258config BLK_DEV_SX8 259 tristate "Promise SATA SX8 support" 260 depends on PCI 261 help 262 Saying Y or M here will enable support for the 263 Promise SATA SX8 controllers. 264 265 Use devices /dev/sx8/$N and /dev/sx8/$Np$M. 266 267config BLK_DEV_RAM 268 tristate "RAM block device support" 269 help 270 Saying Y here will allow you to use a portion of your RAM memory as 271 a block device, so that you can make file systems on it, read and 272 write to it and do all the other things that you can do with normal 273 block devices (such as hard drives). It is usually used to load and 274 store a copy of a minimal root file system off of a floppy into RAM 275 during the initial install of Linux. 276 277 Note that the kernel command line option "ramdisk=XX" is now obsolete. 278 For details, read <file:Documentation/admin-guide/blockdev/ramdisk.rst>. 279 280 To compile this driver as a module, choose M here: the 281 module will be called brd. An alias "rd" has been defined 282 for historical reasons. 283 284 Most normal users won't need the RAM disk functionality, and can 285 thus say N here. 286 287config BLK_DEV_RAM_COUNT 288 int "Default number of RAM disks" 289 default "16" 290 depends on BLK_DEV_RAM 291 help 292 The default value is 16 RAM disks. Change this if you know what you 293 are doing. If you boot from a filesystem that needs to be extracted 294 in memory, you will need at least one RAM disk (e.g. root on cramfs). 295 296config BLK_DEV_RAM_SIZE 297 int "Default RAM disk size (kbytes)" 298 depends on BLK_DEV_RAM 299 default "4096" 300 help 301 The default value is 4096 kilobytes. Only change this if you know 302 what you are doing. 303 304config CDROM_PKTCDVD 305 tristate "Packet writing on CD/DVD media (DEPRECATED)" 306 depends on !UML 307 select CDROM 308 select SCSI_COMMON 309 help 310 Note: This driver is deprecated and will be removed from the 311 kernel in the near future! 312 313 If you have a CDROM/DVD drive that supports packet writing, say 314 Y to include support. It should work with any MMC/Mt Fuji 315 compliant ATAPI or SCSI drive, which is just about any newer 316 DVD/CD writer. 317 318 Currently only writing to CD-RW, DVD-RW, DVD+RW and DVDRAM discs 319 is possible. 320 DVD-RW disks must be in restricted overwrite mode. 321 322 See the file <file:Documentation/cdrom/packet-writing.rst> 323 for further information on the use of this driver. 324 325 To compile this driver as a module, choose M here: the 326 module will be called pktcdvd. 327 328config CDROM_PKTCDVD_BUFFERS 329 int "Free buffers for data gathering" 330 depends on CDROM_PKTCDVD 331 default "8" 332 help 333 This controls the maximum number of active concurrent packets. More 334 concurrent packets can increase write performance, but also require 335 more memory. Each concurrent packet will require approximately 64Kb 336 of non-swappable kernel memory, memory which will be allocated when 337 a disc is opened for writing. 338 339config CDROM_PKTCDVD_WCACHE 340 bool "Enable write caching" 341 depends on CDROM_PKTCDVD 342 help 343 If enabled, write caching will be set for the CD-R/W device. For now 344 this option is dangerous unless the CD-RW media is known good, as we 345 don't do deferred write error handling yet. 346 347config ATA_OVER_ETH 348 tristate "ATA over Ethernet support" 349 depends on NET 350 help 351 This driver provides Support for ATA over Ethernet block 352 devices like the Coraid EtherDrive (R) Storage Blade. 353 354config SUNVDC 355 tristate "Sun Virtual Disk Client support" 356 depends on SUN_LDOMS 357 help 358 Support for virtual disk devices as a client under Sun 359 Logical Domains. 360 361source "drivers/s390/block/Kconfig" 362 363config XEN_BLKDEV_FRONTEND 364 tristate "Xen virtual block device support" 365 depends on XEN 366 default y 367 select XEN_XENBUS_FRONTEND 368 help 369 This driver implements the front-end of the Xen virtual 370 block device driver. It communicates with a back-end driver 371 in another domain which drives the actual block device. 372 373config XEN_BLKDEV_BACKEND 374 tristate "Xen block-device backend driver" 375 depends on XEN_BACKEND 376 help 377 The block-device backend driver allows the kernel to export its 378 block devices to other guests via a high-performance shared-memory 379 interface. 380 381 The corresponding Linux frontend driver is enabled by the 382 CONFIG_XEN_BLKDEV_FRONTEND configuration option. 383 384 The backend driver attaches itself to a any block device specified 385 in the XenBus configuration. There are no limits to what the block 386 device as long as it has a major and minor. 387 388 If you are compiling a kernel to run in a Xen block backend driver 389 domain (often this is domain 0) you should say Y here. To 390 compile this driver as a module, chose M here: the module 391 will be called xen-blkback. 392 393 394config VIRTIO_BLK 395 tristate "Virtio block driver" 396 depends on VIRTIO 397 help 398 This is the virtual block driver for virtio. It can be used with 399 QEMU based VMMs (like KVM or Xen). Say Y or M. 400 401config BLK_DEV_RBD 402 tristate "Rados block device (RBD)" 403 depends on INET && BLOCK 404 select CEPH_LIB 405 select LIBCRC32C 406 select CRYPTO_AES 407 select CRYPTO 408 help 409 Say Y here if you want include the Rados block device, which stripes 410 a block device over objects stored in the Ceph distributed object 411 store. 412 413 More information at http://ceph.newdream.net/. 414 415 If unsure, say N. 416 417config BLK_DEV_RSXX 418 tristate "IBM Flash Adapter 900GB Full Height PCIe Device Driver" 419 depends on PCI 420 select CRC32 421 help 422 Device driver for IBM's high speed PCIe SSD 423 storage device: Flash Adapter 900GB Full Height. 424 425 To compile this driver as a module, choose M here: the 426 module will be called rsxx. 427 428source "drivers/block/rnbd/Kconfig" 429 430endif # BLK_DEV 431
