1menu "Core Netfilter Configuration" 2 depends on NET && INET && NETFILTER 3 4config NETFILTER_INGRESS 5 bool "Netfilter ingress support" 6 default y 7 select NET_INGRESS 8 help 9 This allows you to classify packets from ingress using the Netfilter 10 infrastructure. 11 12config NETFILTER_NETLINK 13 tristate 14 15config NETFILTER_FAMILY_BRIDGE 16 bool 17 18config NETFILTER_FAMILY_ARP 19 bool 20 21config NETFILTER_NETLINK_ACCT 22tristate "Netfilter NFACCT over NFNETLINK interface" 23 depends on NETFILTER_ADVANCED 24 select NETFILTER_NETLINK 25 help 26 If this option is enabled, the kernel will include support 27 for extended accounting via NFNETLINK. 28 29config NETFILTER_NETLINK_QUEUE 30 tristate "Netfilter NFQUEUE over NFNETLINK interface" 31 depends on NETFILTER_ADVANCED 32 select NETFILTER_NETLINK 33 help 34 If this option is enabled, the kernel will include support 35 for queueing packets via NFNETLINK. 36 37config NETFILTER_NETLINK_LOG 38 tristate "Netfilter LOG over NFNETLINK interface" 39 default m if NETFILTER_ADVANCED=n 40 select NETFILTER_NETLINK 41 help 42 If this option is enabled, the kernel will include support 43 for logging packets via NFNETLINK. 44 45 This obsoletes the existing ipt_ULOG and ebg_ulog mechanisms, 46 and is also scheduled to replace the old syslog-based ipt_LOG 47 and ip6t_LOG modules. 48 49config NETFILTER_NETLINK_OSF 50 tristate "Netfilter OSF over NFNETLINK interface" 51 depends on NETFILTER_ADVANCED 52 select NETFILTER_NETLINK 53 help 54 If this option is enabled, the kernel will include support 55 for passive OS fingerprint via NFNETLINK. 56 57config NF_CONNTRACK 58 tristate "Netfilter connection tracking support" 59 default m if NETFILTER_ADVANCED=n 60 select NF_DEFRAG_IPV4 61 select NF_DEFRAG_IPV6 if IPV6 != n 62 help 63 Connection tracking keeps a record of what packets have passed 64 through your machine, in order to figure out how they are related 65 into connections. 66 67 This is required to do Masquerading or other kinds of Network 68 Address Translation. It can also be used to enhance packet 69 filtering (see `Connection state match support' below). 70 71 To compile it as a module, choose M here. If unsure, say N. 72 73config NF_LOG_COMMON 74 tristate 75 76config NF_LOG_NETDEV 77 tristate "Netdev packet logging" 78 select NF_LOG_COMMON 79 80if NF_CONNTRACK 81config NETFILTER_CONNCOUNT 82 tristate 83 84config NF_CONNTRACK_MARK 85 bool 'Connection mark tracking support' 86 depends on NETFILTER_ADVANCED 87 help 88 This option enables support for connection marks, used by the 89 `CONNMARK' target and `connmark' match. Similar to the mark value 90 of packets, but this mark value is kept in the conntrack session 91 instead of the individual packets. 92 93config NF_CONNTRACK_SECMARK 94 bool 'Connection tracking security mark support' 95 depends on NETWORK_SECMARK 96 default m if NETFILTER_ADVANCED=n 97 help 98 This option enables security markings to be applied to 99 connections. Typically they are copied to connections from 100 packets using the CONNSECMARK target and copied back from 101 connections to packets with the same target, with the packets 102 being originally labeled via SECMARK. 103 104 If unsure, say 'N'. 105 106config NF_CONNTRACK_ZONES 107 bool 'Connection tracking zones' 108 depends on NETFILTER_ADVANCED 109 help 110 This option enables support for connection tracking zones. 111 Normally, each connection needs to have a unique system wide 112 identity. Connection tracking zones allow to have multiple 113 connections using the same identity, as long as they are 114 contained in different zones. 115 116 If unsure, say `N'. 117 118config NF_CONNTRACK_PROCFS 119 bool "Supply CT list in procfs (OBSOLETE)" 120 default y 121 depends on PROC_FS 122 ---help--- 123 This option enables for the list of known conntrack entries 124 to be shown in procfs under net/netfilter/nf_conntrack. This 125 is considered obsolete in favor of using the conntrack(8) 126 tool which uses Netlink. 127 128config NF_CONNTRACK_EVENTS 129 bool "Connection tracking events" 130 depends on NETFILTER_ADVANCED 131 help 132 If this option is enabled, the connection tracking code will 133 provide a notifier chain that can be used by other kernel code 134 to get notified about changes in the connection tracking state. 135 136 If unsure, say `N'. 137 138config NF_CONNTRACK_TIMEOUT 139 bool 'Connection tracking timeout' 140 depends on NETFILTER_ADVANCED 141 help 142 This option enables support for connection tracking timeout 143 extension. This allows you to attach timeout policies to flow 144 via the CT target. 145 146 If unsure, say `N'. 147 148config NF_CONNTRACK_TIMESTAMP 149 bool 'Connection tracking timestamping' 150 depends on NETFILTER_ADVANCED 151 help 152 This option enables support for connection tracking timestamping. 153 This allows you to store the flow start-time and to obtain 154 the flow-stop time (once it has been destroyed) via Connection 155 tracking events. 156 157 If unsure, say `N'. 158 159config NF_CONNTRACK_LABELS 160 bool "Connection tracking labels" 161 help 162 This option enables support for assigning user-defined flag bits 163 to connection tracking entries. It can be used with xtables connlabel 164 match and the nftables ct expression. 165 166config NF_CT_PROTO_DCCP 167 bool 'DCCP protocol connection tracking support' 168 depends on NETFILTER_ADVANCED 169 default y 170 help 171 With this option enabled, the layer 3 independent connection 172 tracking code will be able to do state tracking on DCCP connections. 173 174 If unsure, say Y. 175 176config NF_CT_PROTO_GRE 177 tristate 178 179config NF_CT_PROTO_SCTP 180 bool 'SCTP protocol connection tracking support' 181 depends on NETFILTER_ADVANCED 182 default y 183 select LIBCRC32C 184 help 185 With this option enabled, the layer 3 independent connection 186 tracking code will be able to do state tracking on SCTP connections. 187 188 If unsure, say Y. 189 190config NF_CT_PROTO_UDPLITE 191 bool 'UDP-Lite protocol connection tracking support' 192 depends on NETFILTER_ADVANCED 193 default y 194 help 195 With this option enabled, the layer 3 independent connection 196 tracking code will be able to do state tracking on UDP-Lite 197 connections. 198 199 If unsure, say Y. 200 201config NF_CONNTRACK_AMANDA 202 tristate "Amanda backup protocol support" 203 depends on NETFILTER_ADVANCED 204 select TEXTSEARCH 205 select TEXTSEARCH_KMP 206 help 207 If you are running the Amanda backup package <http://www.amanda.org/> 208 on this machine or machines that will be MASQUERADED through this 209 machine, then you may want to enable this feature. This allows the 210 connection tracking and natting code to allow the sub-channels that 211 Amanda requires for communication of the backup data, messages and 212 index. 213 214 To compile it as a module, choose M here. If unsure, say N. 215 216config NF_CONNTRACK_FTP 217 tristate "FTP protocol support" 218 default m if NETFILTER_ADVANCED=n 219 help 220 Tracking FTP connections is problematic: special helpers are 221 required for tracking them, and doing masquerading and other forms 222 of Network Address Translation on them. 223 224 This is FTP support on Layer 3 independent connection tracking. 225 Layer 3 independent connection tracking is experimental scheme 226 which generalize ip_conntrack to support other layer 3 protocols. 227 228 To compile it as a module, choose M here. If unsure, say N. 229 230config NF_CONNTRACK_H323 231 tristate "H.323 protocol support" 232 depends on IPV6 || IPV6=n 233 depends on NETFILTER_ADVANCED 234 help 235 H.323 is a VoIP signalling protocol from ITU-T. As one of the most 236 important VoIP protocols, it is widely used by voice hardware and 237 software including voice gateways, IP phones, Netmeeting, OpenPhone, 238 Gnomemeeting, etc. 239 240 With this module you can support H.323 on a connection tracking/NAT 241 firewall. 242 243 This module supports RAS, Fast Start, H.245 Tunnelling, Call 244 Forwarding, RTP/RTCP and T.120 based audio, video, fax, chat, 245 whiteboard, file transfer, etc. For more information, please 246 visit http://nath323.sourceforge.net/. 247 248 To compile it as a module, choose M here. If unsure, say N. 249 250config NF_CONNTRACK_IRC 251 tristate "IRC protocol support" 252 default m if NETFILTER_ADVANCED=n 253 help 254 There is a commonly-used extension to IRC called 255 Direct Client-to-Client Protocol (DCC). This enables users to send 256 files to each other, and also chat to each other without the need 257 of a server. DCC Sending is used anywhere you send files over IRC, 258 and DCC Chat is most commonly used by Eggdrop bots. If you are 259 using NAT, this extension will enable you to send files and initiate 260 chats. Note that you do NOT need this extension to get files or 261 have others initiate chats, or everything else in IRC. 262 263 To compile it as a module, choose M here. If unsure, say N. 264 265config NF_CONNTRACK_BROADCAST 266 tristate 267 268config NF_CONNTRACK_NETBIOS_NS 269 tristate "NetBIOS name service protocol support" 270 select NF_CONNTRACK_BROADCAST 271 help 272 NetBIOS name service requests are sent as broadcast messages from an 273 unprivileged port and responded to with unicast messages to the 274 same port. This make them hard to firewall properly because connection 275 tracking doesn't deal with broadcasts. This helper tracks locally 276 originating NetBIOS name service requests and the corresponding 277 responses. It relies on correct IP address configuration, specifically 278 netmask and broadcast address. When properly configured, the output 279 of "ip address show" should look similar to this: 280 281 $ ip -4 address show eth0 282 4: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000 283 inet 172.16.2.252/24 brd 172.16.2.255 scope global eth0 284 285 To compile it as a module, choose M here. If unsure, say N. 286 287config NF_CONNTRACK_SNMP 288 tristate "SNMP service protocol support" 289 depends on NETFILTER_ADVANCED 290 select NF_CONNTRACK_BROADCAST 291 help 292 SNMP service requests are sent as broadcast messages from an 293 unprivileged port and responded to with unicast messages to the 294 same port. This make them hard to firewall properly because connection 295 tracking doesn't deal with broadcasts. This helper tracks locally 296 originating SNMP service requests and the corresponding 297 responses. It relies on correct IP address configuration, specifically 298 netmask and broadcast address. 299 300 To compile it as a module, choose M here. If unsure, say N. 301 302config NF_CONNTRACK_PPTP 303 tristate "PPtP protocol support" 304 depends on NETFILTER_ADVANCED 305 select NF_CT_PROTO_GRE 306 help 307 This module adds support for PPTP (Point to Point Tunnelling 308 Protocol, RFC2637) connection tracking and NAT. 309 310 If you are running PPTP sessions over a stateful firewall or NAT 311 box, you may want to enable this feature. 312 313 Please note that not all PPTP modes of operation are supported yet. 314 Specifically these limitations exist: 315 - Blindly assumes that control connections are always established 316 in PNS->PAC direction. This is a violation of RFC2637. 317 - Only supports a single call within each session 318 319 To compile it as a module, choose M here. If unsure, say N. 320 321config NF_CONNTRACK_SANE 322 tristate "SANE protocol support" 323 depends on NETFILTER_ADVANCED 324 help 325 SANE is a protocol for remote access to scanners as implemented 326 by the 'saned' daemon. Like FTP, it uses separate control and 327 data connections. 328 329 With this module you can support SANE on a connection tracking 330 firewall. 331 332 To compile it as a module, choose M here. If unsure, say N. 333 334config NF_CONNTRACK_SIP 335 tristate "SIP protocol support" 336 default m if NETFILTER_ADVANCED=n 337 help 338 SIP is an application-layer control protocol that can establish, 339 modify, and terminate multimedia sessions (conferences) such as 340 Internet telephony calls. With the ip_conntrack_sip and 341 the nf_nat_sip modules you can support the protocol on a connection 342 tracking/NATing firewall. 343 344 To compile it as a module, choose M here. If unsure, say N. 345 346config NF_CONNTRACK_TFTP 347 tristate "TFTP protocol support" 348 depends on NETFILTER_ADVANCED 349 help 350 TFTP connection tracking helper, this is required depending 351 on how restrictive your ruleset is. 352 If you are using a tftp client behind -j SNAT or -j MASQUERADING 353 you will need this. 354 355 To compile it as a module, choose M here. If unsure, say N. 356 357config NF_CT_NETLINK 358 tristate 'Connection tracking netlink interface' 359 select NETFILTER_NETLINK 360 default m if NETFILTER_ADVANCED=n 361 help 362 This option enables support for a netlink-based userspace interface 363 364config NF_CT_NETLINK_TIMEOUT 365 tristate 'Connection tracking timeout tuning via Netlink' 366 select NETFILTER_NETLINK 367 depends on NETFILTER_ADVANCED 368 depends on NF_CONNTRACK_TIMEOUT 369 help 370 This option enables support for connection tracking timeout 371 fine-grain tuning. This allows you to attach specific timeout 372 policies to flows, instead of using the global timeout policy. 373 374 If unsure, say `N'. 375 376config NF_CT_NETLINK_HELPER 377 tristate 'Connection tracking helpers in user-space via Netlink' 378 select NETFILTER_NETLINK 379 depends on NF_CT_NETLINK 380 depends on NETFILTER_NETLINK_QUEUE 381 depends on NETFILTER_NETLINK_GLUE_CT 382 depends on NETFILTER_ADVANCED 383 help 384 This option enables the user-space connection tracking helpers 385 infrastructure. 386 387 If unsure, say `N'. 388 389config NETFILTER_NETLINK_GLUE_CT 390 bool "NFQUEUE and NFLOG integration with Connection Tracking" 391 default n 392 depends on (NETFILTER_NETLINK_QUEUE || NETFILTER_NETLINK_LOG) && NF_CT_NETLINK 393 help 394 If this option is enabled, NFQUEUE and NFLOG can include 395 Connection Tracking information together with the packet is 396 the enqueued via NFNETLINK. 397 398config NF_NAT 399 tristate 400 401config NF_NAT_NEEDED 402 bool 403 depends on NF_NAT 404 default y 405 406config NF_NAT_PROTO_DCCP 407 bool 408 depends on NF_NAT && NF_CT_PROTO_DCCP 409 default NF_NAT && NF_CT_PROTO_DCCP 410 411config NF_NAT_PROTO_UDPLITE 412 bool 413 depends on NF_NAT && NF_CT_PROTO_UDPLITE 414 default NF_NAT && NF_CT_PROTO_UDPLITE 415 416config NF_NAT_PROTO_SCTP 417 bool 418 default NF_NAT && NF_CT_PROTO_SCTP 419 depends on NF_NAT && NF_CT_PROTO_SCTP 420 421config NF_NAT_AMANDA 422 tristate 423 depends on NF_CONNTRACK && NF_NAT 424 default NF_NAT && NF_CONNTRACK_AMANDA 425 426config NF_NAT_FTP 427 tristate 428 depends on NF_CONNTRACK && NF_NAT 429 default NF_NAT && NF_CONNTRACK_FTP 430 431config NF_NAT_IRC 432 tristate 433 depends on NF_CONNTRACK && NF_NAT 434 default NF_NAT && NF_CONNTRACK_IRC 435 436config NF_NAT_SIP 437 tristate 438 depends on NF_CONNTRACK && NF_NAT 439 default NF_NAT && NF_CONNTRACK_SIP 440 441config NF_NAT_TFTP 442 tristate 443 depends on NF_CONNTRACK && NF_NAT 444 default NF_NAT && NF_CONNTRACK_TFTP 445 446config NF_NAT_REDIRECT 447 bool 448 449config NETFILTER_SYNPROXY 450 tristate 451 452endif # NF_CONNTRACK 453 454config NF_TABLES 455 select NETFILTER_NETLINK 456 tristate "Netfilter nf_tables support" 457 help 458 nftables is the new packet classification framework that intends to 459 replace the existing {ip,ip6,arp,eb}_tables infrastructure. It 460 provides a pseudo-state machine with an extensible instruction-set 461 (also known as expressions) that the userspace 'nft' utility 462 (http://www.netfilter.org/projects/nftables) uses to build the 463 rule-set. It also comes with the generic set infrastructure that 464 allows you to construct mappings between matchings and actions 465 for performance lookups. 466 467 To compile it as a module, choose M here. 468 469if NF_TABLES 470 471config NF_TABLES_SET 472 tristate "Netfilter nf_tables set infrastructure" 473 help 474 This option enables the nf_tables set infrastructure that allows to 475 look up for elements in a set and to build one-way mappings between 476 matchings and actions. 477 478config NF_TABLES_INET 479 depends on IPV6 480 select NF_TABLES_IPV4 481 select NF_TABLES_IPV6 482 bool "Netfilter nf_tables mixed IPv4/IPv6 tables support" 483 help 484 This option enables support for a mixed IPv4/IPv6 "inet" table. 485 486config NF_TABLES_NETDEV 487 bool "Netfilter nf_tables netdev tables support" 488 help 489 This option enables support for the "netdev" table. 490 491config NFT_NUMGEN 492 tristate "Netfilter nf_tables number generator module" 493 help 494 This option adds the number generator expression used to perform 495 incremental counting and random numbers bound to a upper limit. 496 497config NFT_CT 498 depends on NF_CONNTRACK 499 tristate "Netfilter nf_tables conntrack module" 500 help 501 This option adds the "ct" expression that you can use to match 502 connection tracking information such as the flow state. 503 504config NFT_FLOW_OFFLOAD 505 depends on NF_CONNTRACK && NF_FLOW_TABLE 506 tristate "Netfilter nf_tables hardware flow offload module" 507 help 508 This option adds the "flow_offload" expression that you can use to 509 choose what flows are placed into the hardware. 510 511config NFT_COUNTER 512 tristate "Netfilter nf_tables counter module" 513 help 514 This option adds the "counter" expression that you can use to 515 include packet and byte counters in a rule. 516 517config NFT_CONNLIMIT 518 tristate "Netfilter nf_tables connlimit module" 519 depends on NF_CONNTRACK 520 depends on NETFILTER_ADVANCED 521 select NETFILTER_CONNCOUNT 522 help 523 This option adds the "connlimit" expression that you can use to 524 ratelimit rule matchings per connections. 525 526config NFT_LOG 527 tristate "Netfilter nf_tables log module" 528 help 529 This option adds the "log" expression that you can use to log 530 packets matching some criteria. 531 532config NFT_LIMIT 533 tristate "Netfilter nf_tables limit module" 534 help 535 This option adds the "limit" expression that you can use to 536 ratelimit rule matchings. 537 538config NFT_MASQ 539 depends on NF_CONNTRACK 540 depends on NF_NAT 541 tristate "Netfilter nf_tables masquerade support" 542 help 543 This option adds the "masquerade" expression that you can use 544 to perform NAT in the masquerade flavour. 545 546config NFT_REDIR 547 depends on NF_CONNTRACK 548 depends on NF_NAT 549 tristate "Netfilter nf_tables redirect support" 550 help 551 This options adds the "redirect" expression that you can use 552 to perform NAT in the redirect flavour. 553 554config NFT_NAT 555 depends on NF_CONNTRACK 556 select NF_NAT 557 tristate "Netfilter nf_tables nat module" 558 help 559 This option adds the "nat" expression that you can use to perform 560 typical Network Address Translation (NAT) packet transformations. 561 562config NFT_TUNNEL 563 tristate "Netfilter nf_tables tunnel module" 564 help 565 This option adds the "tunnel" expression that you can use to set 566 tunneling policies. 567 568config NFT_OBJREF 569 tristate "Netfilter nf_tables stateful object reference module" 570 help 571 This option adds the "objref" expression that allows you to refer to 572 stateful objects, such as counters and quotas. 573 574config NFT_QUEUE 575 depends on NETFILTER_NETLINK_QUEUE 576 tristate "Netfilter nf_tables queue module" 577 help 578 This is required if you intend to use the userspace queueing 579 infrastructure (also known as NFQUEUE) from nftables. 580 581config NFT_QUOTA 582 tristate "Netfilter nf_tables quota module" 583 help 584 This option adds the "quota" expression that you can use to match 585 enforce bytes quotas. 586 587config NFT_REJECT 588 default m if NETFILTER_ADVANCED=n 589 tristate "Netfilter nf_tables reject support" 590 depends on !NF_TABLES_INET || (IPV6!=m || m) 591 help 592 This option adds the "reject" expression that you can use to 593 explicitly deny and notify via TCP reset/ICMP informational errors 594 unallowed traffic. 595 596config NFT_REJECT_INET 597 depends on NF_TABLES_INET 598 default NFT_REJECT 599 tristate 600 601config NFT_COMPAT 602 depends on NETFILTER_XTABLES 603 tristate "Netfilter x_tables over nf_tables module" 604 help 605 This is required if you intend to use any of existing 606 x_tables match/target extensions over the nf_tables 607 framework. 608 609config NFT_HASH 610 tristate "Netfilter nf_tables hash module" 611 help 612 This option adds the "hash" expression that you can use to perform 613 a hash operation on registers. 614 615config NFT_FIB 616 tristate 617 618config NFT_FIB_INET 619 depends on NF_TABLES_INET 620 depends on NFT_FIB_IPV4 621 depends on NFT_FIB_IPV6 622 tristate "Netfilter nf_tables fib inet support" 623 help 624 This option allows using the FIB expression from the inet table. 625 The lookup will be delegated to the IPv4 or IPv6 FIB depending 626 on the protocol of the packet. 627 628config NFT_SOCKET 629 tristate "Netfilter nf_tables socket match support" 630 depends on IPV6 || IPV6=n 631 select NF_SOCKET_IPV4 632 select NF_SOCKET_IPV6 if NF_TABLES_IPV6 633 help 634 This option allows matching for the presence or absence of a 635 corresponding socket and its attributes. 636 637config NFT_OSF 638 tristate "Netfilter nf_tables passive OS fingerprint support" 639 depends on NETFILTER_ADVANCED 640 select NETFILTER_NETLINK_OSF 641 help 642 This option allows matching packets from an specific OS. 643 644config NFT_TPROXY 645 tristate "Netfilter nf_tables tproxy support" 646 depends on IPV6 || IPV6=n 647 select NF_DEFRAG_IPV4 648 select NF_DEFRAG_IPV6 if NF_TABLES_IPV6 649 select NF_TPROXY_IPV4 650 select NF_TPROXY_IPV6 if NF_TABLES_IPV6 651 help 652 This makes transparent proxy support available in nftables. 653 654if NF_TABLES_NETDEV 655 656config NF_DUP_NETDEV 657 tristate "Netfilter packet duplication support" 658 help 659 This option enables the generic packet duplication infrastructure 660 for Netfilter. 661 662config NFT_DUP_NETDEV 663 tristate "Netfilter nf_tables netdev packet duplication support" 664 select NF_DUP_NETDEV 665 help 666 This option enables packet duplication for the "netdev" family. 667 668config NFT_FWD_NETDEV 669 tristate "Netfilter nf_tables netdev packet forwarding support" 670 select NF_DUP_NETDEV 671 help 672 This option enables packet forwarding for the "netdev" family. 673 674config NFT_FIB_NETDEV 675 depends on NFT_FIB_IPV4 676 depends on NFT_FIB_IPV6 677 tristate "Netfilter nf_tables netdev fib lookups support" 678 help 679 This option allows using the FIB expression from the netdev table. 680 The lookup will be delegated to the IPv4 or IPv6 FIB depending 681 on the protocol of the packet. 682 683endif # NF_TABLES_NETDEV 684 685endif # NF_TABLES 686 687config NF_FLOW_TABLE_INET 688 tristate "Netfilter flow table mixed IPv4/IPv6 module" 689 depends on NF_FLOW_TABLE 690 help 691 This option adds the flow table mixed IPv4/IPv6 support. 692 693 To compile it as a module, choose M here. 694 695config NF_FLOW_TABLE 696 tristate "Netfilter flow table module" 697 depends on NETFILTER_INGRESS 698 depends on NF_CONNTRACK 699 depends on NF_TABLES 700 help 701 This option adds the flow table core infrastructure. 702 703 To compile it as a module, choose M here. 704 705config NETFILTER_XTABLES 706 tristate "Netfilter Xtables support (required for ip_tables)" 707 default m if NETFILTER_ADVANCED=n 708 help 709 This is required if you intend to use any of ip_tables, 710 ip6_tables or arp_tables. 711 712if NETFILTER_XTABLES 713 714comment "Xtables combined modules" 715 716config NETFILTER_XT_MARK 717 tristate 'nfmark target and match support' 718 default m if NETFILTER_ADVANCED=n 719 ---help--- 720 This option adds the "MARK" target and "mark" match. 721 722 Netfilter mark matching allows you to match packets based on the 723 "nfmark" value in the packet. 724 The target allows you to create rules in the "mangle" table which alter 725 the netfilter mark (nfmark) field associated with the packet. 726 727 Prior to routing, the nfmark can influence the routing method and can 728 also be used by other subsystems to change their behavior. 729 730config NETFILTER_XT_CONNMARK 731 tristate 'ctmark target and match support' 732 depends on NF_CONNTRACK 733 depends on NETFILTER_ADVANCED 734 select NF_CONNTRACK_MARK 735 ---help--- 736 This option adds the "CONNMARK" target and "connmark" match. 737 738 Netfilter allows you to store a mark value per connection (a.k.a. 739 ctmark), similarly to the packet mark (nfmark). Using this 740 target and match, you can set and match on this mark. 741 742config NETFILTER_XT_SET 743 tristate 'set target and match support' 744 depends on IP_SET 745 depends on NETFILTER_ADVANCED 746 help 747 This option adds the "SET" target and "set" match. 748 749 Using this target and match, you can add/delete and match 750 elements in the sets created by ipset(8). 751 752 To compile it as a module, choose M here. If unsure, say N. 753 754# alphabetically ordered list of targets 755 756comment "Xtables targets" 757 758config NETFILTER_XT_TARGET_AUDIT 759 tristate "AUDIT target support" 760 depends on AUDIT 761 depends on NETFILTER_ADVANCED 762 ---help--- 763 This option adds a 'AUDIT' target, which can be used to create 764 audit records for packets dropped/accepted. 765 766 To compileit as a module, choose M here. If unsure, say N. 767 768config NETFILTER_XT_TARGET_CHECKSUM 769 tristate "CHECKSUM target support" 770 depends on IP_NF_MANGLE || IP6_NF_MANGLE 771 depends on NETFILTER_ADVANCED 772 ---help--- 773 This option adds a `CHECKSUM' target, which can be used in the iptables mangle 774 table to work around buggy DHCP clients in virtualized environments. 775 776 Some old DHCP clients drop packets because they are not aware 777 that the checksum would normally be offloaded to hardware and 778 thus should be considered valid. 779 This target can be used to fill in the checksum using iptables 780 when such packets are sent via a virtual network device. 781 782 To compile it as a module, choose M here. If unsure, say N. 783 784config NETFILTER_XT_TARGET_CLASSIFY 785 tristate '"CLASSIFY" target support' 786 depends on NETFILTER_ADVANCED 787 help 788 This option adds a `CLASSIFY' target, which enables the user to set 789 the priority of a packet. Some qdiscs can use this value for 790 classification, among these are: 791 792 atm, cbq, dsmark, pfifo_fast, htb, prio 793 794 To compile it as a module, choose M here. If unsure, say N. 795 796config NETFILTER_XT_TARGET_CONNMARK 797 tristate '"CONNMARK" target support' 798 depends on NF_CONNTRACK 799 depends on NETFILTER_ADVANCED 800 select NETFILTER_XT_CONNMARK 801 ---help--- 802 This is a backwards-compat option for the user's convenience 803 (e.g. when running oldconfig). It selects 804 CONFIG_NETFILTER_XT_CONNMARK (combined connmark/CONNMARK module). 805 806config NETFILTER_XT_TARGET_CONNSECMARK 807 tristate '"CONNSECMARK" target support' 808 depends on NF_CONNTRACK && NF_CONNTRACK_SECMARK 809 default m if NETFILTER_ADVANCED=n 810 help 811 The CONNSECMARK target copies security markings from packets 812 to connections, and restores security markings from connections 813 to packets (if the packets are not already marked). This would 814 normally be used in conjunction with the SECMARK target. 815 816 To compile it as a module, choose M here. If unsure, say N. 817 818config NETFILTER_XT_TARGET_CT 819 tristate '"CT" target support' 820 depends on NF_CONNTRACK 821 depends on IP_NF_RAW || IP6_NF_RAW 822 depends on NETFILTER_ADVANCED 823 help 824 This options adds a `CT' target, which allows to specify initial 825 connection tracking parameters like events to be delivered and 826 the helper to be used. 827 828 To compile it as a module, choose M here. If unsure, say N. 829 830config NETFILTER_XT_TARGET_DSCP 831 tristate '"DSCP" and "TOS" target support' 832 depends on IP_NF_MANGLE || IP6_NF_MANGLE 833 depends on NETFILTER_ADVANCED 834 help 835 This option adds a `DSCP' target, which allows you to manipulate 836 the IPv4/IPv6 header DSCP field (differentiated services codepoint). 837 838 The DSCP field can have any value between 0x0 and 0x3f inclusive. 839 840 It also adds the "TOS" target, which allows you to create rules in 841 the "mangle" table which alter the Type Of Service field of an IPv4 842 or the Priority field of an IPv6 packet, prior to routing. 843 844 To compile it as a module, choose M here. If unsure, say N. 845 846config NETFILTER_XT_TARGET_HL 847 tristate '"HL" hoplimit target support' 848 depends on IP_NF_MANGLE || IP6_NF_MANGLE 849 depends on NETFILTER_ADVANCED 850 ---help--- 851 This option adds the "HL" (for IPv6) and "TTL" (for IPv4) 852 targets, which enable the user to change the 853 hoplimit/time-to-live value of the IP header. 854 855 While it is safe to decrement the hoplimit/TTL value, the 856 modules also allow to increment and set the hoplimit value of 857 the header to arbitrary values. This is EXTREMELY DANGEROUS 858 since you can easily create immortal packets that loop 859 forever on the network. 860 861config NETFILTER_XT_TARGET_HMARK 862 tristate '"HMARK" target support' 863 depends on IP6_NF_IPTABLES || IP6_NF_IPTABLES=n 864 depends on NETFILTER_ADVANCED 865 ---help--- 866 This option adds the "HMARK" target. 867 868 The target allows you to create rules in the "raw" and "mangle" tables 869 which set the skbuff mark by means of hash calculation within a given 870 range. The nfmark can influence the routing method and can also be used 871 by other subsystems to change their behaviour. 872 873 To compile it as a module, choose M here. If unsure, say N. 874 875config NETFILTER_XT_TARGET_IDLETIMER 876 tristate "IDLETIMER target support" 877 depends on NETFILTER_ADVANCED 878 help 879 880 This option adds the `IDLETIMER' target. Each matching packet 881 resets the timer associated with label specified when the rule is 882 added. When the timer expires, it triggers a sysfs notification. 883 The remaining time for expiration can be read via sysfs. 884 885 To compile it as a module, choose M here. If unsure, say N. 886 887config NETFILTER_XT_TARGET_LED 888 tristate '"LED" target support' 889 depends on LEDS_CLASS && LEDS_TRIGGERS 890 depends on NETFILTER_ADVANCED 891 help 892 This option adds a `LED' target, which allows you to blink LEDs in 893 response to particular packets passing through your machine. 894 895 This can be used to turn a spare LED into a network activity LED, 896 which only flashes in response to FTP transfers, for example. Or 897 you could have an LED which lights up for a minute or two every time 898 somebody connects to your machine via SSH. 899 900 You will need support for the "led" class to make this work. 901 902 To create an LED trigger for incoming SSH traffic: 903 iptables -A INPUT -p tcp --dport 22 -j LED --led-trigger-id ssh --led-delay 1000 904 905 Then attach the new trigger to an LED on your system: 906 echo netfilter-ssh > /sys/class/leds/<ledname>/trigger 907 908 For more information on the LEDs available on your system, see 909 Documentation/leds/leds-class.txt 910 911config NETFILTER_XT_TARGET_LOG 912 tristate "LOG target support" 913 select NF_LOG_COMMON 914 select NF_LOG_IPV4 915 select NF_LOG_IPV6 if IP6_NF_IPTABLES 916 default m if NETFILTER_ADVANCED=n 917 help 918 This option adds a `LOG' target, which allows you to create rules in 919 any iptables table which records the packet header to the syslog. 920 921 To compile it as a module, choose M here. If unsure, say N. 922 923config NETFILTER_XT_TARGET_MARK 924 tristate '"MARK" target support' 925 depends on NETFILTER_ADVANCED 926 select NETFILTER_XT_MARK 927 ---help--- 928 This is a backwards-compat option for the user's convenience 929 (e.g. when running oldconfig). It selects 930 CONFIG_NETFILTER_XT_MARK (combined mark/MARK module). 931 932config NETFILTER_XT_NAT 933 tristate '"SNAT and DNAT" targets support' 934 depends on NF_NAT 935 ---help--- 936 This option enables the SNAT and DNAT targets. 937 938 To compile it as a module, choose M here. If unsure, say N. 939 940config NETFILTER_XT_TARGET_NETMAP 941 tristate '"NETMAP" target support' 942 depends on NF_NAT 943 ---help--- 944 NETMAP is an implementation of static 1:1 NAT mapping of network 945 addresses. It maps the network address part, while keeping the host 946 address part intact. 947 948 To compile it as a module, choose M here. If unsure, say N. 949 950config NETFILTER_XT_TARGET_NFLOG 951 tristate '"NFLOG" target support' 952 default m if NETFILTER_ADVANCED=n 953 select NETFILTER_NETLINK_LOG 954 help 955 This option enables the NFLOG target, which allows to LOG 956 messages through nfnetlink_log. 957 958 To compile it as a module, choose M here. If unsure, say N. 959 960config NETFILTER_XT_TARGET_NFQUEUE 961 tristate '"NFQUEUE" target Support' 962 depends on NETFILTER_ADVANCED 963 select NETFILTER_NETLINK_QUEUE 964 help 965 This target replaced the old obsolete QUEUE target. 966 967 As opposed to QUEUE, it supports 65535 different queues, 968 not just one. 969 970 To compile it as a module, choose M here. If unsure, say N. 971 972config NETFILTER_XT_TARGET_NOTRACK 973 tristate '"NOTRACK" target support (DEPRECATED)' 974 depends on NF_CONNTRACK 975 depends on IP_NF_RAW || IP6_NF_RAW 976 depends on NETFILTER_ADVANCED 977 select NETFILTER_XT_TARGET_CT 978 979config NETFILTER_XT_TARGET_RATEEST 980 tristate '"RATEEST" target support' 981 depends on NETFILTER_ADVANCED 982 help 983 This option adds a `RATEEST' target, which allows to measure 984 rates similar to TC estimators. The `rateest' match can be 985 used to match on the measured rates. 986 987 To compile it as a module, choose M here. If unsure, say N. 988 989config NETFILTER_XT_TARGET_REDIRECT 990 tristate "REDIRECT target support" 991 depends on NF_NAT 992 select NF_NAT_REDIRECT 993 ---help--- 994 REDIRECT is a special case of NAT: all incoming connections are 995 mapped onto the incoming interface's address, causing the packets to 996 come to the local machine instead of passing through. This is 997 useful for transparent proxies. 998 999 To compile it as a module, choose M here. If unsure, say N. 1000 1001config NETFILTER_XT_TARGET_TEE 1002 tristate '"TEE" - packet cloning to alternate destination' 1003 depends on NETFILTER_ADVANCED 1004 depends on IPV6 || IPV6=n 1005 depends on !NF_CONNTRACK || NF_CONNTRACK 1006 select NF_DUP_IPV4 1007 select NF_DUP_IPV6 if IP6_NF_IPTABLES 1008 ---help--- 1009 This option adds a "TEE" target with which a packet can be cloned and 1010 this clone be rerouted to another nexthop. 1011 1012config NETFILTER_XT_TARGET_TPROXY 1013 tristate '"TPROXY" target transparent proxying support' 1014 depends on NETFILTER_XTABLES 1015 depends on NETFILTER_ADVANCED 1016 depends on IPV6 || IPV6=n 1017 depends on IP6_NF_IPTABLES || IP6_NF_IPTABLES=n 1018 depends on IP_NF_MANGLE 1019 select NF_DEFRAG_IPV4 1020 select NF_DEFRAG_IPV6 if IP6_NF_IPTABLES != n 1021 select NF_TPROXY_IPV4 1022 select NF_TPROXY_IPV6 if IP6_NF_IPTABLES 1023 help 1024 This option adds a `TPROXY' target, which is somewhat similar to 1025 REDIRECT. It can only be used in the mangle table and is useful 1026 to redirect traffic to a transparent proxy. It does _not_ depend 1027 on Netfilter connection tracking and NAT, unlike REDIRECT. 1028 For it to work you will have to configure certain iptables rules 1029 and use policy routing. For more information on how to set it up 1030 see Documentation/networking/tproxy.txt. 1031 1032 To compile it as a module, choose M here. If unsure, say N. 1033 1034config NETFILTER_XT_TARGET_TRACE 1035 tristate '"TRACE" target support' 1036 depends on IP_NF_RAW || IP6_NF_RAW 1037 depends on NETFILTER_ADVANCED 1038 help 1039 The TRACE target allows you to mark packets so that the kernel 1040 will log every rule which match the packets as those traverse 1041 the tables, chains, rules. 1042 1043 If you want to compile it as a module, say M here and read 1044 <file:Documentation/kbuild/modules.txt>. If unsure, say `N'. 1045 1046config NETFILTER_XT_TARGET_SECMARK 1047 tristate '"SECMARK" target support' 1048 depends on NETWORK_SECMARK 1049 default m if NETFILTER_ADVANCED=n 1050 help 1051 The SECMARK target allows security marking of network 1052 packets, for use with security subsystems. 1053 1054 To compile it as a module, choose M here. If unsure, say N. 1055 1056config NETFILTER_XT_TARGET_TCPMSS 1057 tristate '"TCPMSS" target support' 1058 depends on IPV6 || IPV6=n 1059 default m if NETFILTER_ADVANCED=n 1060 ---help--- 1061 This option adds a `TCPMSS' target, which allows you to alter the 1062 MSS value of TCP SYN packets, to control the maximum size for that 1063 connection (usually limiting it to your outgoing interface's MTU 1064 minus 40). 1065 1066 This is used to overcome criminally braindead ISPs or servers which 1067 block ICMP Fragmentation Needed packets. The symptoms of this 1068 problem are that everything works fine from your Linux 1069 firewall/router, but machines behind it can never exchange large 1070 packets: 1071 1) Web browsers connect, then hang with no data received. 1072 2) Small mail works fine, but large emails hang. 1073 3) ssh works fine, but scp hangs after initial handshaking. 1074 1075 Workaround: activate this option and add a rule to your firewall 1076 configuration like: 1077 1078 iptables -A FORWARD -p tcp --tcp-flags SYN,RST SYN \ 1079 -j TCPMSS --clamp-mss-to-pmtu 1080 1081 To compile it as a module, choose M here. If unsure, say N. 1082 1083config NETFILTER_XT_TARGET_TCPOPTSTRIP 1084 tristate '"TCPOPTSTRIP" target support' 1085 depends on IP_NF_MANGLE || IP6_NF_MANGLE 1086 depends on NETFILTER_ADVANCED 1087 help 1088 This option adds a "TCPOPTSTRIP" target, which allows you to strip 1089 TCP options from TCP packets. 1090 1091# alphabetically ordered list of matches 1092 1093comment "Xtables matches" 1094 1095config NETFILTER_XT_MATCH_ADDRTYPE 1096 tristate '"addrtype" address type match support' 1097 default m if NETFILTER_ADVANCED=n 1098 ---help--- 1099 This option allows you to match what routing thinks of an address, 1100 eg. UNICAST, LOCAL, BROADCAST, ... 1101 1102 If you want to compile it as a module, say M here and read 1103 <file:Documentation/kbuild/modules.txt>. If unsure, say `N'. 1104 1105config NETFILTER_XT_MATCH_BPF 1106 tristate '"bpf" match support' 1107 depends on NETFILTER_ADVANCED 1108 help 1109 BPF matching applies a linux socket filter to each packet and 1110 accepts those for which the filter returns non-zero. 1111 1112 To compile it as a module, choose M here. If unsure, say N. 1113 1114config NETFILTER_XT_MATCH_CGROUP 1115 tristate '"control group" match support' 1116 depends on NETFILTER_ADVANCED 1117 depends on CGROUPS 1118 select CGROUP_NET_CLASSID 1119 ---help--- 1120 Socket/process control group matching allows you to match locally 1121 generated packets based on which net_cls control group processes 1122 belong to. 1123 1124config NETFILTER_XT_MATCH_CLUSTER 1125 tristate '"cluster" match support' 1126 depends on NF_CONNTRACK 1127 depends on NETFILTER_ADVANCED 1128 ---help--- 1129 This option allows you to build work-load-sharing clusters of 1130 network servers/stateful firewalls without having a dedicated 1131 load-balancing router/server/switch. Basically, this match returns 1132 true when the packet must be handled by this cluster node. Thus, 1133 all nodes see all packets and this match decides which node handles 1134 what packets. The work-load sharing algorithm is based on source 1135 address hashing. 1136 1137 If you say Y or M here, try `iptables -m cluster --help` for 1138 more information. 1139 1140config NETFILTER_XT_MATCH_COMMENT 1141 tristate '"comment" match support' 1142 depends on NETFILTER_ADVANCED 1143 help 1144 This option adds a `comment' dummy-match, which allows you to put 1145 comments in your iptables ruleset. 1146 1147 If you want to compile it as a module, say M here and read 1148 <file:Documentation/kbuild/modules.txt>. If unsure, say `N'. 1149 1150config NETFILTER_XT_MATCH_CONNBYTES 1151 tristate '"connbytes" per-connection counter match support' 1152 depends on NF_CONNTRACK 1153 depends on NETFILTER_ADVANCED 1154 help 1155 This option adds a `connbytes' match, which allows you to match the 1156 number of bytes and/or packets for each direction within a connection. 1157 1158 If you want to compile it as a module, say M here and read 1159 <file:Documentation/kbuild/modules.txt>. If unsure, say `N'. 1160 1161config NETFILTER_XT_MATCH_CONNLABEL 1162 tristate '"connlabel" match support' 1163 select NF_CONNTRACK_LABELS 1164 depends on NF_CONNTRACK 1165 depends on NETFILTER_ADVANCED 1166 ---help--- 1167 This match allows you to test and assign userspace-defined labels names 1168 to a connection. The kernel only stores bit values - mapping 1169 names to bits is done by userspace. 1170 1171 Unlike connmark, more than 32 flag bits may be assigned to a 1172 connection simultaneously. 1173 1174config NETFILTER_XT_MATCH_CONNLIMIT 1175 tristate '"connlimit" match support' 1176 depends on NF_CONNTRACK 1177 depends on NETFILTER_ADVANCED 1178 select NETFILTER_CONNCOUNT 1179 ---help--- 1180 This match allows you to match against the number of parallel 1181 connections to a server per client IP address (or address block). 1182 1183config NETFILTER_XT_MATCH_CONNMARK 1184 tristate '"connmark" connection mark match support' 1185 depends on NF_CONNTRACK 1186 depends on NETFILTER_ADVANCED 1187 select NETFILTER_XT_CONNMARK 1188 ---help--- 1189 This is a backwards-compat option for the user's convenience 1190 (e.g. when running oldconfig). It selects 1191 CONFIG_NETFILTER_XT_CONNMARK (combined connmark/CONNMARK module). 1192 1193config NETFILTER_XT_MATCH_CONNTRACK 1194 tristate '"conntrack" connection tracking match support' 1195 depends on NF_CONNTRACK 1196 default m if NETFILTER_ADVANCED=n 1197 help 1198 This is a general conntrack match module, a superset of the state match. 1199 1200 It allows matching on additional conntrack information, which is 1201 useful in complex configurations, such as NAT gateways with multiple 1202 internet links or tunnels. 1203 1204 To compile it as a module, choose M here. If unsure, say N. 1205 1206config NETFILTER_XT_MATCH_CPU 1207 tristate '"cpu" match support' 1208 depends on NETFILTER_ADVANCED 1209 help 1210 CPU matching allows you to match packets based on the CPU 1211 currently handling the packet. 1212 1213 To compile it as a module, choose M here. If unsure, say N. 1214 1215config NETFILTER_XT_MATCH_DCCP 1216 tristate '"dccp" protocol match support' 1217 depends on NETFILTER_ADVANCED 1218 default IP_DCCP 1219 help 1220 With this option enabled, you will be able to use the iptables 1221 `dccp' match in order to match on DCCP source/destination ports 1222 and DCCP flags. 1223 1224 If you want to compile it as a module, say M here and read 1225 <file:Documentation/kbuild/modules.txt>. If unsure, say `N'. 1226 1227config NETFILTER_XT_MATCH_DEVGROUP 1228 tristate '"devgroup" match support' 1229 depends on NETFILTER_ADVANCED 1230 help 1231 This options adds a `devgroup' match, which allows to match on the 1232 device group a network device is assigned to. 1233 1234 To compile it as a module, choose M here. If unsure, say N. 1235 1236config NETFILTER_XT_MATCH_DSCP 1237 tristate '"dscp" and "tos" match support' 1238 depends on NETFILTER_ADVANCED 1239 help 1240 This option adds a `DSCP' match, which allows you to match against 1241 the IPv4/IPv6 header DSCP field (differentiated services codepoint). 1242 1243 The DSCP field can have any value between 0x0 and 0x3f inclusive. 1244 1245 It will also add a "tos" match, which allows you to match packets 1246 based on the Type Of Service fields of the IPv4 packet (which share 1247 the same bits as DSCP). 1248 1249 To compile it as a module, choose M here. If unsure, say N. 1250 1251config NETFILTER_XT_MATCH_ECN 1252 tristate '"ecn" match support' 1253 depends on NETFILTER_ADVANCED 1254 ---help--- 1255 This option adds an "ECN" match, which allows you to match against 1256 the IPv4 and TCP header ECN fields. 1257 1258 To compile it as a module, choose M here. If unsure, say N. 1259 1260config NETFILTER_XT_MATCH_ESP 1261 tristate '"esp" match support' 1262 depends on NETFILTER_ADVANCED 1263 help 1264 This match extension allows you to match a range of SPIs 1265 inside ESP header of IPSec packets. 1266 1267 To compile it as a module, choose M here. If unsure, say N. 1268 1269config NETFILTER_XT_MATCH_HASHLIMIT 1270 tristate '"hashlimit" match support' 1271 depends on IP6_NF_IPTABLES || IP6_NF_IPTABLES=n 1272 depends on NETFILTER_ADVANCED 1273 help 1274 This option adds a `hashlimit' match. 1275 1276 As opposed to `limit', this match dynamically creates a hash table 1277 of limit buckets, based on your selection of source/destination 1278 addresses and/or ports. 1279 1280 It enables you to express policies like `10kpps for any given 1281 destination address' or `500pps from any given source address' 1282 with a single rule. 1283 1284config NETFILTER_XT_MATCH_HELPER 1285 tristate '"helper" match support' 1286 depends on NF_CONNTRACK 1287 depends on NETFILTER_ADVANCED 1288 help 1289 Helper matching allows you to match packets in dynamic connections 1290 tracked by a conntrack-helper, ie. ip_conntrack_ftp 1291 1292 To compile it as a module, choose M here. If unsure, say Y. 1293 1294config NETFILTER_XT_MATCH_HL 1295 tristate '"hl" hoplimit/TTL match support' 1296 depends on NETFILTER_ADVANCED 1297 ---help--- 1298 HL matching allows you to match packets based on the hoplimit 1299 in the IPv6 header, or the time-to-live field in the IPv4 1300 header of the packet. 1301 1302config NETFILTER_XT_MATCH_IPCOMP 1303 tristate '"ipcomp" match support' 1304 depends on NETFILTER_ADVANCED 1305 help 1306 This match extension allows you to match a range of CPIs(16 bits) 1307 inside IPComp header of IPSec packets. 1308 1309 To compile it as a module, choose M here. If unsure, say N. 1310 1311config NETFILTER_XT_MATCH_IPRANGE 1312 tristate '"iprange" address range match support' 1313 depends on NETFILTER_ADVANCED 1314 ---help--- 1315 This option adds a "iprange" match, which allows you to match based on 1316 an IP address range. (Normal iptables only matches on single addresses 1317 with an optional mask.) 1318 1319 If unsure, say M. 1320 1321config NETFILTER_XT_MATCH_IPVS 1322 tristate '"ipvs" match support' 1323 depends on IP_VS 1324 depends on NETFILTER_ADVANCED 1325 depends on NF_CONNTRACK 1326 help 1327 This option allows you to match against IPVS properties of a packet. 1328 1329 If unsure, say N. 1330 1331config NETFILTER_XT_MATCH_L2TP 1332 tristate '"l2tp" match support' 1333 depends on NETFILTER_ADVANCED 1334 default L2TP 1335 ---help--- 1336 This option adds an "L2TP" match, which allows you to match against 1337 L2TP protocol header fields. 1338 1339 To compile it as a module, choose M here. If unsure, say N. 1340 1341config NETFILTER_XT_MATCH_LENGTH 1342 tristate '"length" match support' 1343 depends on NETFILTER_ADVANCED 1344 help 1345 This option allows you to match the length of a packet against a 1346 specific value or range of values. 1347 1348 To compile it as a module, choose M here. If unsure, say N. 1349 1350config NETFILTER_XT_MATCH_LIMIT 1351 tristate '"limit" match support' 1352 depends on NETFILTER_ADVANCED 1353 help 1354 limit matching allows you to control the rate at which a rule can be 1355 matched: mainly useful in combination with the LOG target ("LOG 1356 target support", below) and to avoid some Denial of Service attacks. 1357 1358 To compile it as a module, choose M here. If unsure, say N. 1359 1360config NETFILTER_XT_MATCH_MAC 1361 tristate '"mac" address match support' 1362 depends on NETFILTER_ADVANCED 1363 help 1364 MAC matching allows you to match packets based on the source 1365 Ethernet address of the packet. 1366 1367 To compile it as a module, choose M here. If unsure, say N. 1368 1369config NETFILTER_XT_MATCH_MARK 1370 tristate '"mark" match support' 1371 depends on NETFILTER_ADVANCED 1372 select NETFILTER_XT_MARK 1373 ---help--- 1374 This is a backwards-compat option for the user's convenience 1375 (e.g. when running oldconfig). It selects 1376 CONFIG_NETFILTER_XT_MARK (combined mark/MARK module). 1377 1378config NETFILTER_XT_MATCH_MULTIPORT 1379 tristate '"multiport" Multiple port match support' 1380 depends on NETFILTER_ADVANCED 1381 help 1382 Multiport matching allows you to match TCP or UDP packets based on 1383 a series of source or destination ports: normally a rule can only 1384 match a single range of ports. 1385 1386 To compile it as a module, choose M here. If unsure, say N. 1387 1388config NETFILTER_XT_MATCH_NFACCT 1389 tristate '"nfacct" match support' 1390 depends on NETFILTER_ADVANCED 1391 select NETFILTER_NETLINK_ACCT 1392 help 1393 This option allows you to use the extended accounting through 1394 nfnetlink_acct. 1395 1396 To compile it as a module, choose M here. If unsure, say N. 1397 1398config NETFILTER_XT_MATCH_OSF 1399 tristate '"osf" Passive OS fingerprint match' 1400 depends on NETFILTER_ADVANCED 1401 select NETFILTER_NETLINK_OSF 1402 help 1403 This option selects the Passive OS Fingerprinting match module 1404 that allows to passively match the remote operating system by 1405 analyzing incoming TCP SYN packets. 1406 1407 Rules and loading software can be downloaded from 1408 http://www.ioremap.net/projects/osf 1409 1410 To compile it as a module, choose M here. If unsure, say N. 1411 1412config NETFILTER_XT_MATCH_OWNER 1413 tristate '"owner" match support' 1414 depends on NETFILTER_ADVANCED 1415 ---help--- 1416 Socket owner matching allows you to match locally-generated packets 1417 based on who created the socket: the user or group. It is also 1418 possible to check whether a socket actually exists. 1419 1420config NETFILTER_XT_MATCH_POLICY 1421 tristate 'IPsec "policy" match support' 1422 depends on XFRM 1423 default m if NETFILTER_ADVANCED=n 1424 help 1425 Policy matching allows you to match packets based on the 1426 IPsec policy that was used during decapsulation/will 1427 be used during encapsulation. 1428 1429 To compile it as a module, choose M here. If unsure, say N. 1430 1431config NETFILTER_XT_MATCH_PHYSDEV 1432 tristate '"physdev" match support' 1433 depends on BRIDGE && BRIDGE_NETFILTER 1434 depends on NETFILTER_ADVANCED 1435 help 1436 Physdev packet matching matches against the physical bridge ports 1437 the IP packet arrived on or will leave by. 1438 1439 To compile it as a module, choose M here. If unsure, say N. 1440 1441config NETFILTER_XT_MATCH_PKTTYPE 1442 tristate '"pkttype" packet type match support' 1443 depends on NETFILTER_ADVANCED 1444 help 1445 Packet type matching allows you to match a packet by 1446 its "class", eg. BROADCAST, MULTICAST, ... 1447 1448 Typical usage: 1449 iptables -A INPUT -m pkttype --pkt-type broadcast -j LOG 1450 1451 To compile it as a module, choose M here. If unsure, say N. 1452 1453config NETFILTER_XT_MATCH_QUOTA 1454 tristate '"quota" match support' 1455 depends on NETFILTER_ADVANCED 1456 help 1457 This option adds a `quota' match, which allows to match on a 1458 byte counter. 1459 1460 If you want to compile it as a module, say M here and read 1461 <file:Documentation/kbuild/modules.txt>. If unsure, say `N'. 1462 1463config NETFILTER_XT_MATCH_RATEEST 1464 tristate '"rateest" match support' 1465 depends on NETFILTER_ADVANCED 1466 select NETFILTER_XT_TARGET_RATEEST 1467 help 1468 This option adds a `rateest' match, which allows to match on the 1469 rate estimated by the RATEEST target. 1470 1471 To compile it as a module, choose M here. If unsure, say N. 1472 1473config NETFILTER_XT_MATCH_REALM 1474 tristate '"realm" match support' 1475 depends on NETFILTER_ADVANCED 1476 select IP_ROUTE_CLASSID 1477 help 1478 This option adds a `realm' match, which allows you to use the realm 1479 key from the routing subsystem inside iptables. 1480 1481 This match pretty much resembles the CONFIG_NET_CLS_ROUTE4 option 1482 in tc world. 1483 1484 If you want to compile it as a module, say M here and read 1485 <file:Documentation/kbuild/modules.txt>. If unsure, say `N'. 1486 1487config NETFILTER_XT_MATCH_RECENT 1488 tristate '"recent" match support' 1489 depends on NETFILTER_ADVANCED 1490 ---help--- 1491 This match is used for creating one or many lists of recently 1492 used addresses and then matching against that/those list(s). 1493 1494 Short options are available by using 'iptables -m recent -h' 1495 Official Website: <http://snowman.net/projects/ipt_recent/> 1496 1497config NETFILTER_XT_MATCH_SCTP 1498 tristate '"sctp" protocol match support' 1499 depends on NETFILTER_ADVANCED 1500 default IP_SCTP 1501 help 1502 With this option enabled, you will be able to use the 1503 `sctp' match in order to match on SCTP source/destination ports 1504 and SCTP chunk types. 1505 1506 If you want to compile it as a module, say M here and read 1507 <file:Documentation/kbuild/modules.txt>. If unsure, say `N'. 1508 1509config NETFILTER_XT_MATCH_SOCKET 1510 tristate '"socket" match support' 1511 depends on NETFILTER_XTABLES 1512 depends on NETFILTER_ADVANCED 1513 depends on IPV6 || IPV6=n 1514 depends on IP6_NF_IPTABLES || IP6_NF_IPTABLES=n 1515 select NF_SOCKET_IPV4 1516 select NF_SOCKET_IPV6 if IP6_NF_IPTABLES 1517 select NF_DEFRAG_IPV4 1518 select NF_DEFRAG_IPV6 if IP6_NF_IPTABLES != n 1519 help 1520 This option adds a `socket' match, which can be used to match 1521 packets for which a TCP or UDP socket lookup finds a valid socket. 1522 It can be used in combination with the MARK target and policy 1523 routing to implement full featured non-locally bound sockets. 1524 1525 To compile it as a module, choose M here. If unsure, say N. 1526 1527config NETFILTER_XT_MATCH_STATE 1528 tristate '"state" match support' 1529 depends on NF_CONNTRACK 1530 default m if NETFILTER_ADVANCED=n 1531 help 1532 Connection state matching allows you to match packets based on their 1533 relationship to a tracked connection (ie. previous packets). This 1534 is a powerful tool for packet classification. 1535 1536 To compile it as a module, choose M here. If unsure, say N. 1537 1538config NETFILTER_XT_MATCH_STATISTIC 1539 tristate '"statistic" match support' 1540 depends on NETFILTER_ADVANCED 1541 help 1542 This option adds a `statistic' match, which allows you to match 1543 on packets periodically or randomly with a given percentage. 1544 1545 To compile it as a module, choose M here. If unsure, say N. 1546 1547config NETFILTER_XT_MATCH_STRING 1548 tristate '"string" match support' 1549 depends on NETFILTER_ADVANCED 1550 select TEXTSEARCH 1551 select TEXTSEARCH_KMP 1552 select TEXTSEARCH_BM 1553 select TEXTSEARCH_FSM 1554 help 1555 This option adds a `string' match, which allows you to look for 1556 pattern matchings in packets. 1557 1558 To compile it as a module, choose M here. If unsure, say N. 1559 1560config NETFILTER_XT_MATCH_TCPMSS 1561 tristate '"tcpmss" match support' 1562 depends on NETFILTER_ADVANCED 1563 help 1564 This option adds a `tcpmss' match, which allows you to examine the 1565 MSS value of TCP SYN packets, which control the maximum packet size 1566 for that connection. 1567 1568 To compile it as a module, choose M here. If unsure, say N. 1569 1570config NETFILTER_XT_MATCH_TIME 1571 tristate '"time" match support' 1572 depends on NETFILTER_ADVANCED 1573 ---help--- 1574 This option adds a "time" match, which allows you to match based on 1575 the packet arrival time (at the machine which netfilter is running) 1576 on) or departure time/date (for locally generated packets). 1577 1578 If you say Y here, try `iptables -m time --help` for 1579 more information. 1580 1581 If you want to compile it as a module, say M here. 1582 If unsure, say N. 1583 1584config NETFILTER_XT_MATCH_U32 1585 tristate '"u32" match support' 1586 depends on NETFILTER_ADVANCED 1587 ---help--- 1588 u32 allows you to extract quantities of up to 4 bytes from a packet, 1589 AND them with specified masks, shift them by specified amounts and 1590 test whether the results are in any of a set of specified ranges. 1591 The specification of what to extract is general enough to skip over 1592 headers with lengths stored in the packet, as in IP or TCP header 1593 lengths. 1594 1595 Details and examples are in the kernel module source. 1596 1597endif # NETFILTER_XTABLES 1598 1599endmenu 1600 1601source "net/netfilter/ipset/Kconfig" 1602 1603source "net/netfilter/ipvs/Kconfig" 1604
