1# SPDX-License-Identifier: GPL-2.0-only
2config DRM_PANEL
3	bool
4	depends on DRM
5	help
6	  Panel registration and lookup framework.
7
8menu "Display Panels"
9	depends on DRM && DRM_PANEL
10
11config DRM_PANEL_ARM_VERSATILE
12	tristate "ARM Versatile panel driver"
13	depends on OF
14	depends on MFD_SYSCON
15	select VIDEOMODE_HELPERS
16	help
17	  This driver supports the ARM Versatile panels connected to ARM
18	  reference designs. The panel is detected using special registers
19	  in the Versatile family syscon registers.
20
21config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596
22	tristate "ASUS Z00T TM5P5 NT35596 panel"
23	depends on GPIOLIB && OF
24	depends on DRM_MIPI_DSI
25	depends on BACKLIGHT_CLASS_DEVICE
26	help
27	  Say Y here if you want to enable support for the ASUS TMP5P5
28	  NT35596 1080x1920 video mode panel as found in some Asus
29	  Zenfone 2 Laser Z00T devices.
30
31config DRM_PANEL_BOE_HIMAX8279D
32	tristate "Boe Himax8279d panel"
33	depends on OF
34	depends on DRM_MIPI_DSI
35	depends on BACKLIGHT_CLASS_DEVICE
36	help
37	  Say Y here if you want to enable support for Boe Himax8279d
38	  TFT-LCD modules. The panel has a 1200x1920 resolution and uses
39	  24 bit RGB per pixel. It provides a MIPI DSI interface to
40	  the host and has a built-in LED backlight.
41
42config DRM_PANEL_BOE_TV101WUM_NL6
43	tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel"
44	depends on OF
45	depends on DRM_MIPI_DSI
46	depends on BACKLIGHT_CLASS_DEVICE
47	help
48	  Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
49	  45NA WUXGA PANEL DSI Video Mode panel
50
51config DRM_PANEL_LVDS
52	tristate "Generic LVDS panel driver"
53	depends on OF
54	depends on BACKLIGHT_CLASS_DEVICE
55	select VIDEOMODE_HELPERS
56	help
57	  This driver supports LVDS panels that don't require device-specific
58	  handling of power supplies or control signals. It implements automatic
59	  backlight handling if the panel is attached to a backlight controller.
60
61config DRM_PANEL_SIMPLE
62	tristate "support for simple panels"
63	depends on OF
64	depends on BACKLIGHT_CLASS_DEVICE
65	select VIDEOMODE_HELPERS
66	help
67	  DRM panel driver for dumb panels that need at most a regulator and
68	  a GPIO to be powered up. Optionally a backlight can be attached so
69	  that it can be automatically turned off when the panel goes into a
70	  low power state.
71
72config DRM_PANEL_ELIDA_KD35T133
73	tristate "Elida KD35T133 panel driver"
74	depends on OF
75	depends on DRM_MIPI_DSI
76	depends on BACKLIGHT_CLASS_DEVICE
77	help
78	  Say Y here if you want to enable support for the Elida
79	  KD35T133 controller for 320x480 LCD panels with MIPI-DSI
80	  system interfaces.
81
82config DRM_PANEL_FEIXIN_K101_IM2BA02
83	tristate "Feixin K101 IM2BA02 panel"
84	depends on OF
85	depends on DRM_MIPI_DSI
86	depends on BACKLIGHT_CLASS_DEVICE
87	help
88	  Say Y here if you want to enable support for the Feixin K101 IM2BA02
89	  4-lane 800x1280 MIPI DSI panel.
90
91config DRM_PANEL_FEIYANG_FY07024DI26A30D
92	tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
93	depends on OF
94	depends on DRM_MIPI_DSI
95	depends on BACKLIGHT_CLASS_DEVICE
96	help
97	  Say Y if you want to enable support for panels based on the
98	  Feiyang FY07024DI26A30-D MIPI-DSI interface.
99
100config DRM_PANEL_ILITEK_IL9322
101	tristate "Ilitek ILI9322 320x240 QVGA panels"
102	depends on OF && SPI
103	select REGMAP
104	help
105	  Say Y here if you want to enable support for Ilitek IL9322
106	  QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
107
108config DRM_PANEL_ILITEK_ILI9881C
109	tristate "Ilitek ILI9881C-based panels"
110	depends on OF
111	depends on DRM_MIPI_DSI
112	depends on BACKLIGHT_CLASS_DEVICE
113	help
114	  Say Y if you want to enable support for panels based on the
115	  Ilitek ILI9881c controller.
116
117config DRM_PANEL_INNOLUX_P079ZCA
118	tristate "Innolux P079ZCA panel"
119	depends on OF
120	depends on DRM_MIPI_DSI
121	depends on BACKLIGHT_CLASS_DEVICE
122	help
123	  Say Y here if you want to enable support for Innolux P079ZCA
124	  TFT-LCD modules. The panel has a 1024x768 resolution and uses
125	  24 bit RGB per pixel. It provides a MIPI DSI interface to
126	  the host and has a built-in LED backlight.
127
128config DRM_PANEL_JDI_LT070ME05000
129	tristate "JDI LT070ME05000 WUXGA DSI panel"
130	depends on OF
131	depends on DRM_MIPI_DSI
132	depends on BACKLIGHT_CLASS_DEVICE
133	help
134	  Say Y here if you want to enable support for JDI DSI video mode
135	  panel as found in Google Nexus 7 (2013) devices.
136	  The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
137	  24 bit per pixel.
138
139config DRM_PANEL_KINGDISPLAY_KD097D04
140	tristate "Kingdisplay kd097d04 panel"
141	depends on OF
142	depends on DRM_MIPI_DSI
143	depends on BACKLIGHT_CLASS_DEVICE
144	help
145	  Say Y here if you want to enable support for Kingdisplay kd097d04
146	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
147	  24 bit RGB per pixel. It provides a MIPI DSI interface to
148	  the host and has a built-in LED backlight.
149
150config DRM_PANEL_LEADTEK_LTK050H3146W
151	tristate "Leadtek LTK050H3146W panel"
152	depends on OF
153	depends on DRM_MIPI_DSI
154	depends on BACKLIGHT_CLASS_DEVICE
155	help
156	  Say Y here if you want to enable support for Leadtek LTK050H3146W
157	  TFT-LCD modules. The panel has a 720x1280 resolution and uses
158	  24 bit RGB per pixel. It provides a MIPI DSI interface to
159	  the host and has a built-in LED backlight.
160
161config DRM_PANEL_LEADTEK_LTK500HD1829
162	tristate "Leadtek LTK500HD1829 panel"
163	depends on OF
164	depends on DRM_MIPI_DSI
165	depends on BACKLIGHT_CLASS_DEVICE
166	help
167	  Say Y here if you want to enable support for Kingdisplay kd097d04
168	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
169	  24 bit RGB per pixel. It provides a MIPI DSI interface to
170	  the host and has a built-in LED backlight.
171
172config DRM_PANEL_SAMSUNG_LD9040
173	tristate "Samsung LD9040 RGB/SPI panel"
174	depends on OF && SPI
175	select VIDEOMODE_HELPERS
176
177config DRM_PANEL_LG_LB035Q02
178	tristate "LG LB035Q024573 RGB panel"
179	depends on GPIOLIB && OF && SPI
180	help
181	  Say Y here if you want to enable support for the LB035Q02 RGB panel
182	  (found on the Gumstix Overo Palo35 board). To compile this driver as
183	  a module, choose M here.
184
185config DRM_PANEL_LG_LG4573
186	tristate "LG4573 RGB/SPI panel"
187	depends on OF && SPI
188	select VIDEOMODE_HELPERS
189	help
190	  Say Y here if you want to enable support for LG4573 RGB panel.
191	  To compile this driver as a module, choose M here.
192
193config DRM_PANEL_NEC_NL8048HL11
194	tristate "NEC NL8048HL11 RGB panel"
195	depends on GPIOLIB && OF && SPI
196	help
197	  Say Y here if you want to enable support for the NEC NL8048HL11 RGB
198	  panel (found on the Zoom2/3/3630 SDP boards). To compile this driver
199	  as a module, choose M here.
200
201config DRM_PANEL_NOVATEK_NT35510
202	tristate "Novatek NT35510 RGB panel driver"
203	depends on OF
204	depends on DRM_MIPI_DSI
205	depends on BACKLIGHT_CLASS_DEVICE
206	help
207	  Say Y here if you want to enable support for the panels built
208	  around the Novatek NT35510 display controller, such as some
209	  Hydis panels.
210
211config DRM_PANEL_NOVATEK_NT39016
212	tristate "Novatek NT39016 RGB/SPI panel"
213	depends on OF && SPI
214	depends on BACKLIGHT_CLASS_DEVICE
215	select REGMAP_SPI
216	help
217	  Say Y here if you want to enable support for the panels built
218	  around the Novatek NT39016 display controller.
219
220config DRM_PANEL_MANTIX_MLAF057WE51
221	tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
222	depends on OF
223	depends on DRM_MIPI_DSI
224	depends on BACKLIGHT_CLASS_DEVICE
225	help
226	  Say Y here if you want to enable support for the Mantix
227	  MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
228	  has a resolution of 720x1440 pixels, a built in backlight and touch
229	  controller.
230
231config DRM_PANEL_OLIMEX_LCD_OLINUXINO
232	tristate "Olimex LCD-OLinuXino panel"
233	depends on OF
234	depends on I2C
235	depends on BACKLIGHT_CLASS_DEVICE
236	help
237	  The panel is used with different sizes LCDs, from 480x272 to
238	  1280x800, and 24 bit per pixel.
239
240	  Say Y here if you want to enable support for Olimex Ltd.
241	  LCD-OLinuXino panel.
242
243config DRM_PANEL_ORISETECH_OTM8009A
244	tristate "Orise Technology otm8009a 480x800 dsi 2dl panel"
245	depends on OF
246	depends on DRM_MIPI_DSI
247	depends on BACKLIGHT_CLASS_DEVICE
248	help
249	  Say Y here if you want to enable support for Orise Technology
250	  otm8009a 480x800 dsi 2dl panel.
251
252config DRM_PANEL_OSD_OSD101T2587_53TS
253	tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel"
254	depends on OF
255	depends on DRM_MIPI_DSI
256	depends on BACKLIGHT_CLASS_DEVICE
257	help
258	  Say Y here if you want to enable support for One Stop Displays
259	  OSD101T2587-53TS 10.1" 1920x1200 dsi panel.
260
261config DRM_PANEL_PANASONIC_VVX10F034N00
262	tristate "Panasonic VVX10F034N00 1920x1200 video mode panel"
263	depends on OF
264	depends on DRM_MIPI_DSI
265	depends on BACKLIGHT_CLASS_DEVICE
266	help
267	  Say Y here if you want to enable support for Panasonic VVX10F034N00
268	  WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
269	  Xperia Z2 tablets
270
271config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN
272	tristate "Raspberry Pi 7-inch touchscreen panel"
273	depends on DRM_MIPI_DSI
274	help
275	  Say Y here if you want to enable support for the Raspberry
276	  Pi 7" Touchscreen.  To compile this driver as a module,
277	  choose M here.
278
279config DRM_PANEL_RAYDIUM_RM67191
280	tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel"
281	depends on OF
282	depends on DRM_MIPI_DSI
283	depends on BACKLIGHT_CLASS_DEVICE
284	help
285	  Say Y here if you want to enable support for Raydium RM67191 FHD
286	  (1080x1920) DSI panel.
287
288config DRM_PANEL_RAYDIUM_RM68200
289	tristate "Raydium RM68200 720x1280 DSI video mode panel"
290	depends on OF
291	depends on DRM_MIPI_DSI
292	depends on BACKLIGHT_CLASS_DEVICE
293	help
294	  Say Y here if you want to enable support for Raydium RM68200
295	  720x1280 DSI video mode panel.
296
297config DRM_PANEL_RONBO_RB070D30
298	tristate "Ronbo Electronics RB070D30 panel"
299	depends on OF
300	depends on DRM_MIPI_DSI
301	depends on BACKLIGHT_CLASS_DEVICE
302	help
303	  Say Y here if you want to enable support for Ronbo Electronics
304	  RB070D30 1024x600 DSI panel.
305
306config DRM_PANEL_SAMSUNG_S6D16D0
307	tristate "Samsung S6D16D0 DSI video mode panel"
308	depends on OF
309	depends on DRM_MIPI_DSI
310	select VIDEOMODE_HELPERS
311
312config DRM_PANEL_SAMSUNG_S6E3HA2
313	tristate "Samsung S6E3HA2 DSI video mode panel"
314	depends on OF
315	depends on DRM_MIPI_DSI
316	depends on BACKLIGHT_CLASS_DEVICE
317	select VIDEOMODE_HELPERS
318
319config DRM_PANEL_SAMSUNG_S6E63J0X03
320	tristate "Samsung S6E63J0X03 DSI command mode panel"
321	depends on OF
322	depends on DRM_MIPI_DSI
323	depends on BACKLIGHT_CLASS_DEVICE
324	select VIDEOMODE_HELPERS
325
326config DRM_PANEL_SAMSUNG_S6E63M0
327	tristate "Samsung S6E63M0 RGB panel"
328	depends on OF
329	depends on BACKLIGHT_CLASS_DEVICE
330	help
331	  Say Y here if you want to enable support for Samsung S6E63M0
332	  AMOLED LCD panel. This panel can be accessed using SPI or
333	  DSI.
334
335config DRM_PANEL_SAMSUNG_S6E63M0_SPI
336	tristate "Samsung S6E63M0 RGB SPI interface"
337	depends on SPI
338	depends on DRM_PANEL_SAMSUNG_S6E63M0
339	default DRM_PANEL_SAMSUNG_S6E63M0
340	help
341	  Say Y here if you want to be able to access the Samsung
342	  S6E63M0 panel using SPI.
343
344config DRM_PANEL_SAMSUNG_S6E63M0_DSI
345	tristate "Samsung S6E63M0 RGB DSI interface"
346	depends on DRM_MIPI_DSI
347	depends on DRM_PANEL_SAMSUNG_S6E63M0
348	help
349	  Say Y here if you want to be able to access the Samsung
350	  S6E63M0 panel using DSI.
351
352config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
353	tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
354	depends on OF
355	select DRM_MIPI_DSI
356	select VIDEOMODE_HELPERS
357
358config DRM_PANEL_SAMSUNG_S6E8AA0
359	tristate "Samsung S6E8AA0 DSI video mode panel"
360	depends on OF
361	select DRM_MIPI_DSI
362	select VIDEOMODE_HELPERS
363
364config DRM_PANEL_SEIKO_43WVF1G
365	tristate "Seiko 43WVF1G panel"
366	depends on OF
367	depends on BACKLIGHT_CLASS_DEVICE
368	select VIDEOMODE_HELPERS
369	help
370	  Say Y here if you want to enable support for the Seiko
371	  43WVF1G controller for 800x480 LCD panels
372
373config DRM_PANEL_SHARP_LQ101R1SX01
374	tristate "Sharp LQ101R1SX01 panel"
375	depends on OF
376	depends on DRM_MIPI_DSI
377	depends on BACKLIGHT_CLASS_DEVICE
378	help
379	  Say Y here if you want to enable support for Sharp LQ101R1SX01
380	  TFT-LCD modules. The panel has a 2560x1600 resolution and uses
381	  24 bit RGB per pixel. It provides a dual MIPI DSI interface to
382	  the host and has a built-in LED backlight.
383
384	  To compile this driver as a module, choose M here: the module
385	  will be called panel-sharp-lq101r1sx01.
386
387config DRM_PANEL_SHARP_LS037V7DW01
388	tristate "Sharp LS037V7DW01 VGA LCD panel"
389	depends on GPIOLIB && OF && REGULATOR
390	help
391	  Say Y here if you want to enable support for Sharp LS037V7DW01 VGA
392	  (480x640) LCD panel (found on the TI SDP3430 board).
393
394config DRM_PANEL_SHARP_LS043T1LE01
395	tristate "Sharp LS043T1LE01 qHD video mode panel"
396	depends on OF
397	depends on DRM_MIPI_DSI
398	depends on BACKLIGHT_CLASS_DEVICE
399	help
400	  Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
401	  (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
402
403config DRM_PANEL_SITRONIX_ST7701
404	tristate "Sitronix ST7701 panel driver"
405	depends on OF
406	depends on DRM_MIPI_DSI
407	depends on BACKLIGHT_CLASS_DEVICE
408	help
409	  Say Y here if you want to enable support for the Sitronix
410	  ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
411	  system interfaces.
412
413config DRM_PANEL_SITRONIX_ST7703
414	tristate "Sitronix ST7703 based MIPI touchscreen panels"
415	depends on OF
416	depends on DRM_MIPI_DSI
417	depends on BACKLIGHT_CLASS_DEVICE
418	help
419	  Say Y here if you want to enable support for Sitronix ST7703 based
420	  panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in
421	  the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built
422	  in backlight and touch controller.
423	  Touch input support is provided by the goodix driver and needs to be
424	  selected separately.
425
426config DRM_PANEL_SITRONIX_ST7789V
427	tristate "Sitronix ST7789V panel"
428	depends on OF && SPI
429	depends on BACKLIGHT_CLASS_DEVICE
430	help
431	  Say Y here if you want to enable support for the Sitronix
432	  ST7789V controller for 240x320 LCD panels
433
434config DRM_PANEL_SONY_ACX424AKP
435	tristate "Sony ACX424AKP DSI command mode panel"
436	depends on OF
437	depends on DRM_MIPI_DSI
438	depends on BACKLIGHT_CLASS_DEVICE
439	select VIDEOMODE_HELPERS
440	help
441	  Say Y here if you want to enable the Sony ACX424 display
442	  panel. This panel supports DSI in both command and video
443	  mode.
444
445config DRM_PANEL_SONY_ACX565AKM
446	tristate "Sony ACX565AKM panel"
447	depends on GPIOLIB && OF && SPI
448	depends on BACKLIGHT_CLASS_DEVICE
449	help
450	  Say Y here if you want to enable support for the Sony ACX565AKM
451	  800x600 3.5" panel (found on the Nokia N900).
452
453config DRM_PANEL_TPO_TD028TTEC1
454	tristate "Toppoly (TPO) TD028TTEC1 panel driver"
455	depends on OF && SPI
456	depends on BACKLIGHT_CLASS_DEVICE
457	help
458	  Say Y here if you want to enable support for TPO TD028TTEC1 480x640
459	  2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973).
460
461config DRM_PANEL_TPO_TD043MTEA1
462	tristate "Toppoly (TPO) TD043MTEA1 panel driver"
463	depends on GPIOLIB && OF && REGULATOR && SPI
464	help
465	  Say Y here if you want to enable support for TPO TD043MTEA1 800x480
466	  4.3" panel (found on the OMAP3 Pandora board).
467
468config DRM_PANEL_TPO_TPG110
469	tristate "TPO TPG 800x400 panel"
470	depends on OF && SPI && GPIOLIB
471	depends on BACKLIGHT_CLASS_DEVICE
472	help
473	  Say Y here if you want to enable support for TPO TPG110
474	  400CH LTPS TFT LCD Single Chip Digital Driver for up to
475	  800x400 LCD panels.
476
477config DRM_PANEL_TRULY_NT35597_WQXGA
478	tristate "Truly WQXGA"
479	depends on OF
480	depends on DRM_MIPI_DSI
481	help
482	  Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
483	  Video Mode panel
484
485config DRM_PANEL_VISIONOX_RM69299
486	tristate "Visionox RM69299"
487	depends on OF
488	depends on DRM_MIPI_DSI
489	help
490	  Say Y here if you want to enable support for Visionox
491	  RM69299  DSI Video Mode panel.
492
493config DRM_PANEL_XINPENG_XPP055C272
494	tristate "Xinpeng XPP055C272 panel driver"
495	depends on OF
496	depends on DRM_MIPI_DSI
497	depends on BACKLIGHT_CLASS_DEVICE
498	help
499	  Say Y here if you want to enable support for the Xinpeng
500	  XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI
501	  system interfaces.
502endmenu
503