[
{
"PublicDescription": "Number of times a TSX line had a cache conflict.",
"EventCode": "0x54",
"Counter": "0,1,2,3",
"UMask": "0x1",
"EventName": "TX_MEM.ABORT_CONFLICT",
"SampleAfterValue": "2000003",
"BriefDescription": "Number of times a transactional abort was signaled due to a data conflict on a transactionally accessed address",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"EventCode": "0x54",
"Counter": "0,1,2,3",
"UMask": "0x2",
"EventName": "TX_MEM.ABORT_CAPACITY",
"SampleAfterValue": "2000003",
"BriefDescription": "Number of times a transactional abort was signaled due to a data capacity limitation for transactional reads or writes.",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"PublicDescription": "Number of times a TSX Abort was triggered due to a non-release/commit store to lock.",
"EventCode": "0x54",
"Counter": "0,1,2,3",
"UMask": "0x4",
"EventName": "TX_MEM.ABORT_HLE_STORE_TO_ELIDED_LOCK",
"SampleAfterValue": "2000003",
"BriefDescription": "Number of times a HLE transactional region aborted due to a non XRELEASE prefixed instruction writing to an elided lock in the elision buffer",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"PublicDescription": "Number of times a TSX Abort was triggered due to commit but Lock Buffer not empty.",
"EventCode": "0x54",
"Counter": "0,1,2,3",
"UMask": "0x8",
"EventName": "TX_MEM.ABORT_HLE_ELISION_BUFFER_NOT_EMPTY",
"SampleAfterValue": "2000003",
"BriefDescription": "Number of times an HLE transactional execution aborted due to NoAllocatedElisionBuffer being non-zero.",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"PublicDescription": "Number of times a TSX Abort was triggered due to release/commit but data and address mismatch.",
"EventCode": "0x54",
"Counter": "0,1,2,3",
"UMask": "0x10",
"EventName": "TX_MEM.ABORT_HLE_ELISION_BUFFER_MISMATCH",
"SampleAfterValue": "2000003",
"BriefDescription": "Number of times an HLE transactional execution aborted due to XRELEASE lock not satisfying the address and value requirements in the elision buffer",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"PublicDescription": "Number of times a TSX Abort was triggered due to attempting an unsupported alignment from Lock Buffer.",
"EventCode": "0x54",
"Counter": "0,1,2,3",
"UMask": "0x20",
"EventName": "TX_MEM.ABORT_HLE_ELISION_BUFFER_UNSUPPORTED_ALIGNMENT",
"SampleAfterValue": "2000003",
"BriefDescription": "Number of times an HLE transactional execution aborted due to an unsupported read alignment from the elision buffer.",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"PublicDescription": "Number of times we could not allocate Lock Buffer.",
"EventCode": "0x54",
"Counter": "0,1,2,3",
"UMask": "0x40",
"EventName": "TX_MEM.HLE_ELISION_BUFFER_FULL",
"SampleAfterValue": "2000003",
"BriefDescription": "Number of times HLE lock could not be elided due to ElisionBufferAvailable being zero.",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"EventCode": "0x5d",
"Counter": "0,1,2,3",
"UMask": "0x1",
"EventName": "TX_EXEC.MISC1",
"SampleAfterValue": "2000003",
"BriefDescription": "Counts the number of times a class of instructions that may cause a transactional abort was executed. Since this is the count of execution, it may not always cause a transactional abort.",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"PublicDescription": "Unfriendly TSX abort triggered by a vzeroupper instruction.",
"EventCode": "0x5d",
"Counter": "0,1,2,3",
"UMask": "0x2",
"EventName": "TX_EXEC.MISC2",
"SampleAfterValue": "2000003",
"BriefDescription": "Counts the number of times a class of instructions (e.g., vzeroupper) that may cause a transactional abort was executed inside a transactional region",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"PublicDescription": "Unfriendly TSX abort triggered by a nest count that is too deep.",
"EventCode": "0x5d",
"Counter": "0,1,2,3",
"UMask": "0x4",
"EventName": "TX_EXEC.MISC3",
"SampleAfterValue": "2000003",
"BriefDescription": "Counts the number of times an instruction execution caused the transactional nest count supported to be exceeded",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"PublicDescription": "RTM region detected inside HLE.",
"EventCode": "0x5d",
"Counter": "0,1,2,3",
"UMask": "0x8",
"EventName": "TX_EXEC.MISC4",
"SampleAfterValue": "2000003",
"BriefDescription": "Counts the number of times a XBEGIN instruction was executed inside an HLE transactional region.",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"PublicDescription": "Counts the number of times an HLE XACQUIRE instruction was executed inside an RTM transactional region.",
"EventCode": "0x5d",
"Counter": "0,1,2,3",
"UMask": "0x10",
"EventName": "TX_EXEC.MISC5",
"SampleAfterValue": "2000003",
"BriefDescription": "Counts the number of times an HLE XACQUIRE instruction was executed inside an RTM transactional region",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"EventCode": "0x60",
"Counter": "0,1,2,3",
"UMask": "0x10",
"EventName": "OFFCORE_REQUESTS_OUTSTANDING.L3_MISS_DEMAND_DATA_RD",
"SampleAfterValue": "2000003",
"BriefDescription": "Counts number of Offcore outstanding Demand Data Read requests that miss L3 cache in the superQ every cycle.",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"EventCode": "0x60",
"Counter": "0,1,2,3",
"UMask": "0x10",
"EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_L3_MISS_DEMAND_DATA_RD",
"SampleAfterValue": "2000003",
"BriefDescription": "Cycles with at least 1 Demand Data Read requests who miss L3 cache in the superQ.",
"CounterMask": "1",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"EventCode": "0x60",
"Counter": "0,1,2,3",
"UMask": "0x10",
"EventName": "OFFCORE_REQUESTS_OUTSTANDING.L3_MISS_DEMAND_DATA_RD_GE_6",
"SampleAfterValue": "2000003",
"BriefDescription": "Cycles with at least 6 Demand Data Read requests that miss L3 cache in the superQ.",
"CounterMask": "6",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"EventCode": "0xA3",
"Counter": "0,1,2,3",
"UMask": "0x2",
"EventName": "CYCLE_ACTIVITY.CYCLES_L3_MISS",
"SampleAfterValue": "2000003",
"BriefDescription": "Cycles while L3 cache miss demand load is outstanding.",
"CounterMask": "2",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"EventCode": "0xA3",
"Counter": "0,1,2,3",
"UMask": "0x6",
"EventName": "CYCLE_ACTIVITY.STALLS_L3_MISS",
"SampleAfterValue": "2000003",
"BriefDescription": "Execution stalls while L3 cache miss demand load is outstanding.",
"CounterMask": "6",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"PublicDescription": "Demand Data Read requests who miss L3 cache.",
"EventCode": "0xB0",
"Counter": "0,1,2,3",
"UMask": "0x10",
"EventName": "OFFCORE_REQUESTS.L3_MISS_DEMAND_DATA_RD",
"SampleAfterValue": "100003",
"BriefDescription": "Demand Data Read requests who miss L3 cache",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"PublicDescription": "Counts the number of memory ordering Machine Clears detected. Memory Ordering Machine Clears can result from one of the following:a. memory disambiguation,b. external snoop, orc. cross SMT-HW-thread snoop (stores) hitting load buffer.",
"EventCode": "0xC3",
"Counter": "0,1,2,3",
"UMask": "0x2",
"Errata": "SKL089",
"EventName": "MACHINE_CLEARS.MEMORY_ORDERING",
"SampleAfterValue": "100003",
"BriefDescription": "Counts the number of machine clears due to memory order conflicts.",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"PublicDescription": "Number of times we entered an HLE region. Does not count nested transactions.",
"EventCode": "0xC8",
"Counter": "0,1,2,3",
"UMask": "0x1",
"EventName": "HLE_RETIRED.START",
"SampleAfterValue": "2000003",
"BriefDescription": "Number of times an HLE execution started.",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"PublicDescription": "Number of times HLE commit succeeded.",
"EventCode": "0xC8",
"Counter": "0,1,2,3",
"UMask": "0x2",
"EventName": "HLE_RETIRED.COMMIT",
"SampleAfterValue": "2000003",
"BriefDescription": "Number of times an HLE execution successfully committed",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"PEBS": "1",
"PublicDescription": "Number of times HLE abort was triggered. (PEBS)",
"EventCode": "0xC8",
"Counter": "0,1,2,3",
"UMask": "0x4",
"EventName": "HLE_RETIRED.ABORTED",
"SampleAfterValue": "2000003",
"BriefDescription": "Number of times an HLE execution aborted due to any reasons (multiple categories may count as one). ",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"EventCode": "0xC8",
"Counter": "0,1,2,3",
"UMask": "0x8",
"EventName": "HLE_RETIRED.ABORTED_MEM",
"SampleAfterValue": "2000003",
"BriefDescription": "Number of times an HLE execution aborted due to various memory events (e.g., read/write capacity and conflicts).",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"EventCode": "0xC8",
"Counter": "0,1,2,3",
"UMask": "0x10",
"EventName": "HLE_RETIRED.ABORTED_TIMER",
"SampleAfterValue": "2000003",
"BriefDescription": "Number of times an HLE execution aborted due to hardware timer expiration.",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"EventCode": "0xC8",
"Counter": "0,1,2,3",
"UMask": "0x20",
"EventName": "HLE_RETIRED.ABORTED_UNFRIENDLY",
"SampleAfterValue": "2000003",
"BriefDescription": "Number of times an HLE execution aborted due to HLE-unfriendly instructions and certain unfriendly events (such as AD assists etc.).",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"PublicDescription": "Number of times an HLE execution aborted due to incompatible memory type.",
"EventCode": "0xC8",
"Counter": "0,1,2,3",
"UMask": "0x40",
"EventName": "HLE_RETIRED.ABORTED_MEMTYPE",
"SampleAfterValue": "2000003",
"BriefDescription": "Number of times an HLE execution aborted due to incompatible memory type",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"EventCode": "0xC8",
"Counter": "0,1,2,3",
"UMask": "0x80",
"EventName": "HLE_RETIRED.ABORTED_EVENTS",
"SampleAfterValue": "2000003",
"BriefDescription": "Number of times an HLE execution aborted due to unfriendly events (such as interrupts).",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"PublicDescription": "Number of times we entered an RTM region. Does not count nested transactions.",
"EventCode": "0xC9",
"Counter": "0,1,2,3",
"UMask": "0x1",
"EventName": "RTM_RETIRED.START",
"SampleAfterValue": "2000003",
"BriefDescription": "Number of times an RTM execution started.",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"PublicDescription": "Number of times RTM commit succeeded.",
"EventCode": "0xC9",
"Counter": "0,1,2,3",
"UMask": "0x2",
"EventName": "RTM_RETIRED.COMMIT",
"SampleAfterValue": "2000003",
"BriefDescription": "Number of times an RTM execution successfully committed",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"PEBS": "1",
"PublicDescription": "Number of times RTM abort was triggered. (PEBS)",
"EventCode": "0xC9",
"Counter": "0,1,2,3",
"UMask": "0x4",
"EventName": "RTM_RETIRED.ABORTED",
"SampleAfterValue": "2000003",
"BriefDescription": "Number of times an RTM execution aborted due to any reasons (multiple categories may count as one). ",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"PublicDescription": "Number of times an RTM execution aborted due to various memory events (e.g. read/write capacity and conflicts).",
"EventCode": "0xC9",
"Counter": "0,1,2,3",
"UMask": "0x8",
"EventName": "RTM_RETIRED.ABORTED_MEM",
"SampleAfterValue": "2000003",
"BriefDescription": "Number of times an RTM execution aborted due to various memory events (e.g. read/write capacity and conflicts)",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"EventCode": "0xC9",
"Counter": "0,1,2,3",
"UMask": "0x10",
"EventName": "RTM_RETIRED.ABORTED_TIMER",
"SampleAfterValue": "2000003",
"BriefDescription": "Number of times an RTM execution aborted due to uncommon conditions.",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"PublicDescription": "Number of times an RTM execution aborted due to HLE-unfriendly instructions.",
"EventCode": "0xC9",
"Counter": "0,1,2,3",
"UMask": "0x20",
"EventName": "RTM_RETIRED.ABORTED_UNFRIENDLY",
"SampleAfterValue": "2000003",
"BriefDescription": "Number of times an RTM execution aborted due to HLE-unfriendly instructions",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"PublicDescription": "Number of times an RTM execution aborted due to incompatible memory type.",
"EventCode": "0xC9",
"Counter": "0,1,2,3",
"UMask": "0x40",
"EventName": "RTM_RETIRED.ABORTED_MEMTYPE",
"SampleAfterValue": "2000003",
"BriefDescription": "Number of times an RTM execution aborted due to incompatible memory type",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"PublicDescription": "Number of times an RTM execution aborted due to none of the previous 4 categories (e.g. interrupt).",
"EventCode": "0xC9",
"Counter": "0,1,2,3",
"UMask": "0x80",
"EventName": "RTM_RETIRED.ABORTED_EVENTS",
"SampleAfterValue": "2000003",
"BriefDescription": "Number of times an RTM execution aborted due to none of the previous 4 categories (e.g. interrupt)",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"PEBS": "2",
"PublicDescription": "Counts loads when the latency from first dispatch to completion is greater than 4 cycles. Reported latency may be longer than just the memory latency.",
"EventCode": "0xCD",
"MSRValue": "0x4",
"Counter": "0,1,2,3",
"UMask": "0x1",
"EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_4",
"MSRIndex": "0x3F6",
"SampleAfterValue": "100003",
"BriefDescription": "Counts loads when the latency from first dispatch to completion is greater than 4 cycles.",
"TakenAlone": "1",
"CounterHTOff": "0,1,2,3"
},
{
"PEBS": "2",
"PublicDescription": "Counts loads when the latency from first dispatch to completion is greater than 8 cycles. Reported latency may be longer than just the memory latency.",
"EventCode": "0xCD",
"MSRValue": "0x8",
"Counter": "0,1,2,3",
"UMask": "0x1",
"EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_8",
"MSRIndex": "0x3F6",
"SampleAfterValue": "50021",
"BriefDescription": "Counts loads when the latency from first dispatch to completion is greater than 8 cycles.",
"TakenAlone": "1",
"CounterHTOff": "0,1,2,3"
},
{
"PEBS": "2",
"PublicDescription": "Counts loads when the latency from first dispatch to completion is greater than 16 cycles. Reported latency may be longer than just the memory latency.",
"EventCode": "0xCD",
"MSRValue": "0x10",
"Counter": "0,1,2,3",
"UMask": "0x1",
"EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_16",
"MSRIndex": "0x3F6",
"SampleAfterValue": "20011",
"BriefDescription": "Counts loads when the latency from first dispatch to completion is greater than 16 cycles.",
"TakenAlone": "1",
"CounterHTOff": "0,1,2,3"
},
{
"PEBS": "2",
"PublicDescription": "Counts loads when the latency from first dispatch to completion is greater than 32 cycles. Reported latency may be longer than just the memory latency.",
"EventCode": "0xCD",
"MSRValue": "0x20",
"Counter": "0,1,2,3",
"UMask": "0x1",
"EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_32",
"MSRIndex": "0x3F6",
"SampleAfterValue": "100007",
"BriefDescription": "Counts loads when the latency from first dispatch to completion is greater than 32 cycles.",
"TakenAlone": "1",
"CounterHTOff": "0,1,2,3"
},
{
"PEBS": "2",
"PublicDescription": "Counts loads when the latency from first dispatch to completion is greater than 64 cycles. Reported latency may be longer than just the memory latency.",
"EventCode": "0xCD",
"MSRValue": "0x40",
"Counter": "0,1,2,3",
"UMask": "0x1",
"EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_64",
"MSRIndex": "0x3F6",
"SampleAfterValue": "2003",
"BriefDescription": "Counts loads when the latency from first dispatch to completion is greater than 64 cycles.",
"TakenAlone": "1",
"CounterHTOff": "0,1,2,3"
},
{
"PEBS": "2",
"PublicDescription": "Counts loads when the latency from first dispatch to completion is greater than 128 cycles. Reported latency may be longer than just the memory latency.",
"EventCode": "0xCD",
"MSRValue": "0x80",
"Counter": "0,1,2,3",
"UMask": "0x1",
"EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_128",
"MSRIndex": "0x3F6",
"SampleAfterValue": "1009",
"BriefDescription": "Counts loads when the latency from first dispatch to completion is greater than 128 cycles.",
"TakenAlone": "1",
"CounterHTOff": "0,1,2,3"
},
{
"PEBS": "2",
"PublicDescription": "Counts loads when the latency from first dispatch to completion is greater than 256 cycles. Reported latency may be longer than just the memory latency.",
"EventCode": "0xCD",
"MSRValue": "0x100",
"Counter": "0,1,2,3",
"UMask": "0x1",
"EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_256",
"MSRIndex": "0x3F6",
"SampleAfterValue": "503",
"BriefDescription": "Counts loads when the latency from first dispatch to completion is greater than 256 cycles.",
"TakenAlone": "1",
"CounterHTOff": "0,1,2,3"
},
{
"PEBS": "2",
"PublicDescription": "Counts loads when the latency from first dispatch to completion is greater than 512 cycles. Reported latency may be longer than just the memory latency.",
"EventCode": "0xCD",
"MSRValue": "0x200",
"Counter": "0,1,2,3",
"UMask": "0x1",
"EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_512",
"MSRIndex": "0x3F6",
"SampleAfterValue": "101",
"BriefDescription": "Counts loads when the latency from first dispatch to completion is greater than 512 cycles.",
"TakenAlone": "1",
"CounterHTOff": "0,1,2,3"
},
{
"PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"EventCode": "0xB7, 0xBB",
"MSRValue": "0x3ffc000001 ",
"Counter": "0,1,2,3",
"UMask": "0x1",
"EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.ANY_SNOOP",
"MSRIndex": "0x1a6,0x1a7",
"SampleAfterValue": "100003",
"BriefDescription": "DEMAND_DATA_RD & L3_MISS & ANY_SNOOP",
"Offcore": "1",
"CounterHTOff": "0,1,2,3"
},
{
"PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"EventCode": "0xB7, 0xBB",
"MSRValue": "0x103c000001 ",
"Counter": "0,1,2,3",
"UMask": "0x1",
"EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.SNOOP_HITM",
"MSRIndex": "0x1a6,0x1a7",
"SampleAfterValue": "100003",
"BriefDescription": "DEMAND_DATA_RD & L3_MISS & SNOOP_HITM",
"Offcore": "1",
"CounterHTOff": "0,1,2,3"
},
{
"PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"EventCode": "0xB7, 0xBB",
"MSRValue": "0x043c000001 ",
"Counter": "0,1,2,3",
"UMask": "0x1",
"EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.SNOOP_HIT_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
"SampleAfterValue": "100003",
"BriefDescription": "DEMAND_DATA_RD & L3_MISS & SNOOP_HIT_NO_FWD",
"Offcore": "1",
"CounterHTOff": "0,1,2,3"
},
{
"PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"EventCode": "0xB7, 0xBB",
"MSRValue": "0x023c000001 ",
"Counter": "0,1,2,3",
"UMask": "0x1",
"EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.SNOOP_MISS",
"MSRIndex": "0x1a6,0x1a7",
"SampleAfterValue": "100003",
"BriefDescription": "DEMAND_DATA_RD & L3_MISS & SNOOP_MISS",
"Offcore": "1",
"CounterHTOff": "0,1,2,3"
},
{
"PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"EventCode": "0xB7, 0xBB",
"MSRValue": "0x013c000001 ",
"Counter": "0,1,2,3",
"UMask": "0x1",
"EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.SNOOP_NOT_NEEDED",
"MSRIndex": "0x1a6,0x1a7",
"SampleAfterValue": "100003",
"BriefDescription": "DEMAND_DATA_RD & L3_MISS & SNOOP_NOT_NEEDED",
"Offcore": "1",
"CounterHTOff": "0,1,2,3"
},
{
"PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"EventCode": "0xB7, 0xBB",
"MSRValue": "0x00bc000001 ",
"Counter": "0,1,2,3",
"UMask": "0x1",
"EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.SNOOP_NONE",
"MSRIndex": "0x1a6,0x1a7",
"SampleAfterValue": "100003",
"BriefDescription": "DEMAND_DATA_RD & L3_MISS & SNOOP_NONE",
"Offcore": "1",
"CounterHTOff": "0,1,2,3"
},
{
"PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"EventCode": "0xB7, 0xBB",
"MSRValue": "0x3fc4000001 ",
"Counter": "0,1,2,3",
"UMask": "0x1",
"EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
"MSRIndex": "0x1a6,0x1a7",
"SampleAfterValue": "100003",
"BriefDescription": "DEMAND_DATA_RD & L3_MISS_LOCAL_DRAM & ANY_SNOOP",
"Offcore": "1",
"CounterHTOff": "0,1,2,3"
},
{
"PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"EventCode": "0xB7, 0xBB",
"MSRValue": "0x1004000001 ",
"Counter": "0,1,2,3",
"UMask": "0x1",
"EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_HITM",
"MSRIndex": "0x1a6,0x1a7",
"SampleAfterValue": "100003",
"BriefDescription": "DEMAND_DATA_RD & L3_MISS_LOCAL_DRAM & SNOOP_HITM",
"Offcore": "1",
"CounterHTOff": "0,1,2,3"
},
{
"PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"EventCode": "0xB7, 0xBB",
"MSRValue": "0x0404000001 ",
"Counter": "0,1,2,3",
"UMask": "0x1",
"EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_HIT_NO_FWD",
"MSRIndex": "0x1a6,0x1a7",
"SampleAfterValue": "100003",
"BriefDescription": "DEMAND_DATA_RD & L3_MISS_LOCAL_DRAM & SNOOP_HIT_NO_FWD",
"Offcore": "1",
"CounterHTOff": "0,1,2,3"
},
{
"PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"EventCode": "0xB7, 0xBB",
"MSRValue": "0x0204000001 ",
"Counter": "0,1,2,3",
"UMask": "0x1",
"EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
"MSRIndex": "0x1a6,0x1a7",
"SampleAfterValue": "100003",
"BriefDescription": "DEMAND_DATA_RD & L3_MISS_LOCAL_DRAM & SNOOP_MISS",
"Offcore": "1",
"CounterHTOff": "0,1,2,3"
},
{
"PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"EventCode": "0xB7, 0xBB",
"MSRValue": "0x0104000001 ",
"Counter": "0,1,2,3",
"UMask": "0x1",
"EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NOT_NEEDED",
"MSRIndex": "0x1a6,0x1a7",
"SampleAfterValue": "100003",
"BriefDescription": "DEMAND_DATA_RD & L3_MISS_LOCAL_DRAM & SNOOP_NOT_NEEDED",
"Offcore": "1",
"CounterHTOff": "0,1,2,3"
},
{
"PublicDescription": "tbd Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
"EventCode": "0xB7, 0xBB",
"MSRValue": "0x0084000001 ",
"Counter": "0,1,2,3",
"UMask": "0x1",
"EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
"MSRIndex": "0x1a6,0x1a7",
"SampleAfterValue": "100003",
"BriefDescription": "DEMAND_DATA_RD & L3_MISS_LOCAL_DRAM & SNOOP_NONE",
"Offcore": "1",
"CounterHTOff": "0,1,2,3"
}
]