Lines Matching +full:frame +full:- +full:buffer
1 # SPDX-License-Identifier: GPL-2.0-only
7 tristate "Support for frame buffer device drivers"
11 The frame buffer device provides an abstraction for the graphics
12 hardware. It represents the frame buffer of some video hardware and
14 a well-defined interface, so the software doesn't need to know
15 anything about the low-level (hardware register) stuff.
17 Frame buffer devices work identically across the different
20 server exists which uses the frame buffer device exclusively.
21 On several non-X86 architectures, the frame buffer device is the
27 You need an utility program called fbset to make full use of frame
28 buffer devices. Please read <file:Documentation/fb/framebuffer.rst>
29 and the Framebuffer-HOWTO at
30 <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more
33 This enables support for native frame buffer device (fbdev) drivers.
35 The DRM subsystem provides support for emulated frame buffer devices
40 are compiling a kernel for a non-x86 architecture.
45 (e.g. an accelerated X server) and that are not frame buffer
46 device-aware may cause unexpected results. If unsure, say N.
57 Common utility functions useful to fbdev drivers of VGA-based
82 If you have a PCI-based system, this enables support for these
83 chips: GD-543x, GD-544x, GD-5480.
98 This is the frame buffer device driver for cards based on
105 Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC
135 will be called amba-clcd.
142 This is the frame buffer device driver for the Acorn VIDC graphics
143 hardware found in Acorn RISC PCs and other ARM-based machines. If
160 bool "SA-1100 LCD support"
166 This is a framebuffer device for the SA-1100 LCD Controller.
167 See <http://www.linux-fbdev.org/> for information on framebuffer
170 If you plan to use the LCD display with your SA-1100 system, say
231 This is the frame buffer device driver for the builtin graphics
268 This is the frame buffer device driver for the Amiga FrameMaster
280 is based on the KS-108 lcd controller and is typically a matrix
294 This is the frame buffer device driver for the builtin graphics
298 tristate "Open Firmware frame buffer device support"
316 This driver supports a frame buffer for the graphics adapter in the
325 This driver supports a frame buffer for the "platinum" graphics
334 This driver supports a frame buffer for the "valkyrie" graphics
343 This is the frame buffer device driver for the Chips & Technologies
352 This is the frame buffer device driver for the Asiliant 69030 chipset
361 The IMS Twin Turbo is a PCI-based frame buffer card bundled with
365 tristate "VGA 16-color graphics support"
374 This is the frame buffer device driver for VGA 16 color graphic
381 tristate "HP STI frame buffer device support"
422 This is the frame buffer device driver for generic TGA and SFB+
423 graphic cards. These include DEC ZLXp-E1, -E2 and -E3 PCI cards,
424 also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3
425 TURBOchannel cards, also known as PMAGD-A, -B and -C.
427 Due to hardware limitations ZLX-E2 and E3 cards are not supported
431 you manage to get it going. ;-)
442 This is the frame buffer driver for generic VBE 2.0 compliant
459 This is the frame buffer device driver for generic VESA 2.0
465 bool "EFI-based Framebuffer Support"
472 This is the EFI frame buffer device driver. If the firmware on
497 bool "SGI Graphics Backend frame buffer support"
504 This is the frame buffer device driver for SGI Graphics Backend.
519 Say Y if you want support for SBUS or UPA based frame buffer device.
528 This is the frame buffer device driver for the BWtwo frame buffer.
537 This is the frame buffer device driver for the CGthree frame buffer.
545 This is the frame buffer device driver for the CGsix (GX, TurboGX)
546 frame buffer.
554 This is the frame buffer device driver for the Creator, Creator3D,
564 This is the frame buffer device driver for the TCX 24/8bit frame
565 buffer.
574 This is the frame buffer device driver for the CGfourteen frame
575 buffer on Desktop SPARCsystems with the SX graphics option.
584 This is the frame buffer device driver for the P9100 card
594 This is the frame buffer device driver for the SBUS-based Sun ZX
595 (leo) frame buffer cards.
598 bool "Sun XVR-500 3DLABS Wildcat support"
605 This is the framebuffer device for the Sun XVR-500 and similar
612 bool "Sun XVR-2500 3DLABS Wildcat support"
617 This is the framebuffer device for the Sun XVR-2500 and similar
624 bool "Sun XVR-1000 support"
628 This is the framebuffer device for the Sun XVR-1000 and similar
721 Because fbdev-2.6 requires that drivers must be able to
768 Because fbdev-2.6 requires that drivers must be able to
808 This driver supports the on-board graphics built in to the Intel 810
830 monitor is recommended, but can still work with non-compliant ones.
878 This driver supports the on-board graphics built in to the Intel
903 Say Y here if you want DDC/I2C support for your on-board Intel graphics.
963 (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to
984 interconnects Matrox optional devices, like MGA-TVO on G200 and
989 second head of G400 or MGA-TVO on G200 or G400.
992 i2c-matroxfb.
1001 monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary
1002 head is not compatible with accelerated XFree 3.3.x SVGA servers -
1010 also load i2c-matroxfb to get it to run.
1014 <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to
1041 https://products.amd.com/en-us/GraphicCardResult.aspx
1109 Say Y here to support use of ATI's 64-bit Rage boards (or other
1188 Because fbdev-2.6 requires that drivers must be able to
1210 This is the frame buffer device driver for the SiS 300, 315, 330
1240 This is the frame buffer device driver for Graphics chips of VIA
1308 Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have
1318 This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer
1372 This is the frame buffer device driver for Trident PCI/AGP chipsets.
1408 This is the frame buffer device driver for the 3DLabs Permedia3
1414 tristate "Fujitsu carmine frame buffer support"
1419 This is the frame buffer device driver for the Fujitsu Carmine chip.
1420 The driver provides two independent frame buffer devices.
1474 bool "Wondermedia WM8xxx-series frame buffer support"
1482 This is the framebuffer driver for WonderMedia WM8xxx-series
1496 tristate "HD64461 Frame Buffer support"
1502 This is the frame buffer device driver for the Hitachi HD64461 LCD
1503 frame buffer card.
1506 tristate "PMAG-AA TURBOchannel framebuffer support"
1510 Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
1511 used mainly in the MIPS-based DECstation series.
1514 tristate "PMAG-BA TURBOchannel framebuffer support"
1518 Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
1519 used mainly in the MIPS-based DECstation series.
1522 tristate "PMAGB-B TURBOchannel framebuffer support"
1526 Support for the PMAGB-B TURBOchannel framebuffer card used mainly
1527 in the MIPS-based DECstation series. The card is currently only
1540 bool "G364 frame buffer support"
1545 Olivetti M700-10 systems.
1548 bool "Motorola 68328 native frame buffer support"
1554 Say Y here if you want to support the built-in frame buffer of
1563 Frame buffer driver for the built-in LCD controller in the Marvell
1573 Frame buffer driver for the built-in LCD controller in the Intel
1638 Frame buffer driver for the on-chip SH-Mobile LCD controller.
1646 Frame buffer driver for the built-in FB controller in the Samsung
1668 Frame buffer driver for the CRT and LCD controllers in the Silicon
1689 Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
1690 mplayer -vo fbdev. Supports both UFX6000 (USB 2.0) and UFX7000
1706 Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
1707 mplayer -vo fbdev. Supports all USB 2.0 era DisplayLink devices.
1730 Include support for the virtual frame buffer in the PS3 platform.
1733 int "PS3 default frame buffer size (in MiB)"
1737 This is the default size (in MiB) of the virtual frame buffer in
1743 tristate "Xilinx frame buffer support"
1760 tristate "Cobalt server LCD frame buffer support"
1777 tristate "DA8xx/OMAP-L1xx/AM335x Framebuffer support"
1785 This is the frame buffer device driver for the TI LCD controller
1786 found on DA8xx/OMAP-L1xx/AM335x SoCs.
1790 tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
1797 This is a `virtual' frame buffer device. It operates on a chunk of
1799 board. This means you cannot see any output sent to this frame
1800 buffer device, while it does consume precious memory. The main use
1801 of this frame buffer device is testing and debugging the frame
1802 buffer subsystem. Do NOT enable it for normal systems! To protect
1813 tristate "Xen virtual frame buffer support"
1819 This driver implements the front-end of the Xen virtual
1820 frame buffer driver. It communicates with a back-end
1824 tristate "E-Ink Metronome/8track controller support"
1828 This driver implements support for the E-Ink Metronome
1829 controller. The pre-release name for this device was 8track
1830 and could also have been called by some vendors as PVI-nnnn.
1839 Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers.
1846 bool "Carmine/Coral-P(A) GDC"
1849 This enables framebuffer support for Fujitsu Carmine/Coral-P(A)
1868 Selecting this option adds Coral-P(A)/Lime GDC I2C bus adapter
1873 tristate "EP93XX frame buffer support"
1881 ep93xx-fb.
1891 tristate "E-Ink Broadsheet/Epson S1D13521 controller support"
1895 This driver implements support for the E-Ink Broadsheet
1901 tristate "Microsoft Hyper-V Synthetic Video support"
1910 This framebuffer driver supports Microsoft Hyper-V Synthetic Video.
1919 Say Y if you want support for a simple frame-buffer.
1923 pre-allocated frame buffer surface.
1946 Frame buffer driver for the Silicon Motion SM710, SM712, SM721