232 	dev_dbg(&port->dev, "mos7840_set_reg_sync offset is %x, value %x\n", reg, val);  in mos7840_set_reg_sync()
266 	dev_dbg(&port->dev, "%s offset is %x, return val %x\n", __func__, reg, *val);  in mos7840_get_reg_sync()
290 	dev_dbg(&port->dev, "%s application number is %x\n", __func__, val);  in mos7840_set_uart_reg()
319 	dev_dbg(&port->dev, "%s application number is %x\n", __func__, Wval);  in mos7840_get_uart_reg()
338 	dev_dbg(&port->dev, "SpRegOffset is %2x\n", mos7840_port->SpRegOffset);  in mos7840_dump_serial_port()
339 	dev_dbg(&port->dev, "ControlRegOffset is %2x\n", mos7840_port->ControlRegOffset);  in mos7840_dump_serial_port()
340 	dev_dbg(&port->dev, "DCRRegOffset is %2x\n", mos7840_port->DcrRegOffset);  in mos7840_dump_serial_port()
361 		dev_dbg(&urb->dev->dev, "%s - urb shutting down: %d\n",  in mos7840_set_led_callback()
365 		dev_dbg(&urb->dev->dev, "%s - nonzero urb status: %d\n",  in mos7840_set_led_callback()
441 		dev_dbg(&urb->dev->dev, "nonzero read bulk status received: %d\n", status);  in mos7840_bulk_in_callback()
454 		dev_dbg(&port->dev, "icount.rx is %d:\n", port->icount.rx);  in mos7840_bulk_in_callback()
464 		dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, retval = %d\n", retval);  in mos7840_bulk_in_callback()
493 		dev_dbg(&port->dev, "nonzero write bulk status received:%d\n", status);  in mos7840_bulk_out_data_callback()
558 		dev_dbg(&port->dev, "Reading Spreg failed\n");  in mos7840_open()
564 		dev_dbg(&port->dev, "writing Spreg failed\n");  in mos7840_open()
571 		dev_dbg(&port->dev, "writing Spreg failed\n");  in mos7840_open()
580 		dev_dbg(&port->dev, "Reading Controlreg failed\n");  in mos7840_open()
588 		dev_dbg(&port->dev, "writing Controlreg failed\n");  in mos7840_open()
599 		dev_dbg(&port->dev, "disabling interrupts failed\n");  in mos7840_open()
606 		dev_dbg(&port->dev, "Writing FIFO_CONTROL_REGISTER  failed\n");  in mos7840_open()
613 		dev_dbg(&port->dev, "Writing FIFO_CONTROL_REGISTER  failed\n");  in mos7840_open()
674 	dev_dbg(&port->dev, "port number is %d\n", port->port_number);  in mos7840_open()
675 	dev_dbg(&port->dev, "minor number is %d\n", port->minor);  in mos7840_open()
676 	dev_dbg(&port->dev, "Bulkin endpoint is %d\n", port->bulk_in_endpointAddress);  in mos7840_open()
677 	dev_dbg(&port->dev, "BulkOut endpoint is %d\n", port->bulk_out_endpointAddress);  in mos7840_open()
678 	dev_dbg(&port->dev, "Interrupt endpoint is %d\n", port->interrupt_in_endpointAddress);  in mos7840_open()
679 	dev_dbg(&port->dev, "port's number in the device is %d\n", mos7840_port->port_num);  in mos7840_open()
701 	dev_dbg(&port->dev, "%s: bulkin endpoint is %d\n", __func__, port->bulk_in_endpointAddress);  in mos7840_open()
749 	dev_dbg(&port->dev, "%s - returns %u\n", __func__, chars);  in mos7840_chars_in_buffer()
803 	dev_dbg(&port->dev, "%s mos7840_port->shadowLCR is %x\n", __func__, mos7840_port->shadowLCR);  in mos7840_break()
831 	dev_dbg(&mos7840_port->port->dev, "%s - returns %u\n", __func__, room);  in mos7840_write_room()
866 			dev_dbg(&port->dev, "URB:%d\n", i);  in mos7840_write()
873 		dev_dbg(&port->dev, "%s - no more free urbs\n", __func__);  in mos7840_write()
908 	dev_dbg(&port->dev, "bulkout endpoint is %d\n", port->bulk_out_endpointAddress);  in mos7840_write()
925 	dev_dbg(&port->dev, "icount.tx is %d:\n", port->icount.tx);  in mos7840_write()
1012 	dev_dbg(&port->dev, "%s - 0x%04X\n", __func__, result);  in mos7840_tiocmget()
1045 		dev_dbg(&port->dev, "setting MODEM_CONTROL_REGISTER Failed\n");  in mos7840_tiocmset()
1061 	dev_dbg(&port->dev, "%s - %d\n", __func__, baudRate);  in mos7840_calc_baud_rate_divisor()
1107 	dev_dbg(&port->dev, "%s - baud = %d\n", __func__, baudRate);  in mos7840_send_cmd_write_baud_rate()
1118 			dev_dbg(&port->dev, "Writing spreg failed in set_serial_baud\n");  in mos7840_send_cmd_write_baud_rate()
1131 			dev_dbg(&port->dev, "Writing spreg failed in set_serial_baud\n");  in mos7840_send_cmd_write_baud_rate()
1146 			dev_dbg(&port->dev, "reading spreg failed in set_serial_baud\n");  in mos7840_send_cmd_write_baud_rate()
1153 			dev_dbg(&port->dev, "Writing spreg failed in set_serial_baud\n");  in mos7840_send_cmd_write_baud_rate()
1169 		dev_dbg(&port->dev, "set_serial_baud Value to write DLL is %x\n", Data);  in mos7840_send_cmd_write_baud_rate()
1173 		dev_dbg(&port->dev, "set_serial_baud Value to write DLM is %x\n", Data);  in mos7840_send_cmd_write_baud_rate()
1234 			dev_dbg(&port->dev, "%s - parity = odd\n", __func__);  in mos7840_change_port_settings()
1237 			dev_dbg(&port->dev, "%s - parity = even\n", __func__);  in mos7840_change_port_settings()
1241 		dev_dbg(&port->dev, "%s - parity = none\n", __func__);  in mos7840_change_port_settings()
1250 		dev_dbg(&port->dev, "%s - stop bits = 2\n", __func__);  in mos7840_change_port_settings()
1253 		dev_dbg(&port->dev, "%s - stop bits = 1\n", __func__);  in mos7840_change_port_settings()
1261 	dev_dbg(&port->dev, "%s - mos7840_port->shadowLCR is %x\n", __func__,  in mos7840_change_port_settings()
1303 		dev_dbg(&port->dev, "%s", "Picked default baud...\n");  in mos7840_change_port_settings()
1307 	dev_dbg(&port->dev, "%s - baud rate = %d\n", __func__, baud);  in mos7840_change_port_settings()
1318 			dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, status = %d\n",  in mos7840_change_port_settings()
1323 	dev_dbg(&port->dev, "%s - mos7840_port->shadowLCR is End %x\n", __func__,  in mos7840_change_port_settings()
1348 			dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, status = %d\n",  in mos7840_set_termios()
1396 		dev_dbg(&port->dev, "%s TIOCSERGETLSR\n", __func__);  in mos7840_ioctl()
1526 		dev_dbg(dev, "Writing ZLP_REG5 failed status-0x%x\n", status);  in mos7840_attach()
1528 		dev_dbg(dev, "ZLP_REG5 Writing success status%d\n", status);  in mos7840_attach()
1547 	dev_dbg(&port->dev, "mos7840_startup: configuring port %d\n", pnum);  in mos7840_port_probe()
1563 	dev_dbg(&port->dev, "port->minor = %d\n", port->minor);  in mos7840_port_probe()
1564 	dev_dbg(&port->dev, "mos7840_port->port_num = %d\n", mos7840_port->port_num);  in mos7840_port_probe()
1588 		dev_dbg(&port->dev, "Reading ControlReg failed status-0x%x\n", status);  in mos7840_port_probe()
1591 		dev_dbg(&port->dev, "ControlReg Reading success val is %x, status%d\n", Data, status);  in mos7840_port_probe()
1600 		dev_dbg(&port->dev, "Writing ControlReg failed(rx_disable) status-0x%x\n", status);  in mos7840_port_probe()
1603 		dev_dbg(&port->dev, "ControlReg Writing success(rx_disable) status%d\n", status);  in mos7840_port_probe()
1611 		dev_dbg(&port->dev, "Writing DCR0 failed status-0x%x\n", status);  in mos7840_port_probe()
1614 		dev_dbg(&port->dev, "DCR0 Writing success status%d\n", status);  in mos7840_port_probe()
1620 		dev_dbg(&port->dev, "Writing DCR1 failed status-0x%x\n", status);  in mos7840_port_probe()
1623 		dev_dbg(&port->dev, "DCR1 Writing success status%d\n", status);  in mos7840_port_probe()
1629 		dev_dbg(&port->dev, "Writing DCR2 failed status-0x%x\n", status);  in mos7840_port_probe()
1632 		dev_dbg(&port->dev, "DCR2 Writing success status%d\n", status);  in mos7840_port_probe()
1638 		dev_dbg(&port->dev, "Writing CLK_START_VALUE_REGISTER failed status-0x%x\n", status);  in mos7840_port_probe()
1641 		dev_dbg(&port->dev, "CLK_START_VALUE_REGISTER Writing success status%d\n", status);  in mos7840_port_probe()
1646 		dev_dbg(&port->dev, "Writing CLK_MULTI_REGISTER failed status-0x%x\n", status);  in mos7840_port_probe()
1649 		dev_dbg(&port->dev, "CLK_MULTI_REGISTER Writing success status%d\n", status);  in mos7840_port_probe()
1655 		dev_dbg(&port->dev, "Writing SCRATCH_PAD_REGISTER failed status-0x%x\n", status);  in mos7840_port_probe()
1658 		dev_dbg(&port->dev, "SCRATCH_PAD_REGISTER Writing success status%d\n", status);  in mos7840_port_probe()
1666 		dev_dbg(&port->dev, "ZLIP offset %x\n",  in mos7840_port_probe()
1669 			dev_dbg(&port->dev, "Writing ZLP_REG%d failed status-0x%x\n", pnum + 2, status);  in mos7840_port_probe()
1672 			dev_dbg(&port->dev, "ZLP_REG%d Writing success status%d\n", pnum + 2, status);  in mos7840_port_probe()
1678 		dev_dbg(&port->dev, "ZLIP offset %x\n",  in mos7840_port_probe()
1681 			dev_dbg(&port->dev, "Writing ZLP_REG%d failed status-0x%x\n", pnum + 1, status);  in mos7840_port_probe()
1684 			dev_dbg(&port->dev, "ZLP_REG%d Writing success status%d\n", pnum + 1, status);  in mos7840_port_probe()