Lines Matching full:ports
162 properly when DMA is enabled. Make sure that ports where
247 these ports, depending on how the serial port pins are configured.
256 Select the number of available UART ports for the Samsung S3C
265 Allow selection of the S3C24XX on-board serial ports for use as
282 provide all of these ports, depending on how the serial port
362 for serial ports in newer DECstation systems. These include the
417 can enable its onboard serial ports by enabling this option.
528 int "Maximum number of uartlite serial ports"
547 This driver supports the Zilog8530 serial ports found on many Sparc
548 systems. Say Y or M if you want to be able to these serial ports.
562 This driver supports the 8250 serial ports that run the keyboard and
564 to these serial ports.
603 This driver supports the Siemens SAB82532 DUSCC serial ports on newer
605 serial ports.
627 This driver supports the Zilog8530 serial ports found on SGI
628 systems. Say Y or M if you want to be able to these serial ports.
642 int "Maximum number of SCI(F) serial ports" if EXPERT
674 Support for the LPC32XX high speed serial ports (up to 900kbps).
685 ports on the LPC32XX as the console, you can do so by answering
702 This serial driver supports the Freescale Coldfire serial ports.
705 int "Default baudrate for Coldfire serial ports"
710 ColdFire serial ports. The usual default varies from board to board,
725 This driver supports the Zilog z85C30 serial ports found on
727 Say Y or M if you want to be able to these serial ports.
737 both z85C30 and 8250 type ports at the same time.
743 access the built-in serial ports on powermacs will need to
746 If you enable this option, any z85c30 ports in the system will
751 Say N unless you need the z85c30 ports on your (Power)Mac
768 This driver supports the SCC and SMC serial ports on Motorola
792 If you have a PIC32, this driver supports the serial ports.
794 Say Y or M to use PIC32 serial ports, otherwise say N. Note that
804 of the serial ports.
813 This driver supports MPC52xx and MPC512x PSC serial ports. If you would
859 int "Maximum number of TMPTX39XX/49XX SIO ports"
878 of cards which provide multiple serial ports. You would need
930 can enable its onboard serial ports by enabling this option.
1002 This driver supports the QE serial ports on Freescale embedded
1018 Support for console on SCCNXP serial ports.
1028 This selects support for SC16IS7xx serial ports.
1130 int "Maximum number of Altera UART ports"
1135 UART ports. The usual default varies from board to board, and
1139 int "Default baudrate for Altera UART ports"
1144 Altera UART ports. The usual default varies from board to board,
1232 int "Maximum number of AR933X serial ports"
1236 Set this to the number of serial ports you want the driver
1250 This driver support the UART ports on ARM MPS2.
1268 int "Number of ARC UART ports"
1273 Set this to the number of serial ports you want the driver
1293 int "Maximum number of RocketPort EXPRESS/INFINITY ports"
1297 If multiple cards are present, the default limit of 32 ports may
1483 int "Maximum number of CSIO/UART ports (1-8)"
1514 int "Maximum number of LiteUART ports"
1518 Set this to the maximum number of serial ports you want the driver
1540 If you enable this option, Sunplus serial ports in the system will
1563 This driver supports Nuvoton MA35D1 family UART ports. If you would
1566 module. If you enable this option, Ma35D1 serial ports in the system