Lines Matching +full:chip +full:- +full:select
1 # SPDX-License-Identifier: GPL-2.0
19 comment "Non-8250 serial port support"
24 select SERIAL_CORE
35 select SERIAL_CORE_CONSOLE
51 select SERIAL_CORE
62 select SERIAL_CORE_CONSOLE
63 select SERIAL_EARLYCON
79 select SERIAL_CORE
80 select SERIAL_CORE_CONSOLE
81 select SERIAL_EARLYCON
89 bool "Early console using RISC-V SBI"
91 select SERIAL_CORE
92 select SERIAL_CORE_CONSOLE
93 select SERIAL_EARLYCON
95 Support for early debug console using RISC-V SBI. This enables
101 tristate "BCM1xxx on-chip DUART serial support"
103 select SERIAL_CORE
107 the BCM1250 and derived System-On-a-Chip (SOC) devices. Note that
113 the module will be called sb1250-duart.
118 select SERIAL_CORE_CONSOLE
129 bool "AT91 on-chip serial port support"
132 select SERIAL_CORE
133 select SERIAL_MCTRL_GPIO if GPIOLIB
134 select MFD_AT91_USART
136 This enables the driver for the on-chip UARTs of the Atmel
142 select SERIAL_CORE_CONSOLE
143 select SERIAL_EARLYCON
145 Say Y here if you wish to use an on-chip UART on a Atmel
204 select SERIAL_CORE
206 This enables the driver for the on-chip UARTs of the Amlogic
212 select SERIAL_CORE_CONSOLE
213 select SERIAL_EARLYCON
223 select SERIAL_CORE
224 select SERIAL_MCTRL_GPIO if GPIOLIB
226 This enables the driver for the on-chip UARTs of the Cirrus
232 select SERIAL_CORE_CONSOLE
242 select SERIAL_CORE
244 Support for the on-chip UARTs on the Samsung
256 Select the number of available UART ports for the Samsung S3C
262 select SERIAL_CORE_CONSOLE
263 select SERIAL_EARLYCON
265 Allow selection of the S3C24XX on-board serial ports for use as
278 select SERIAL_CORE
280 Support for the on-chip UARTs on the NVIDIA Tegra series SOCs
290 select SERIAL_CORE
292 Support for the mailbox-based TCU (Tegra Combined UART) serial port.
299 select SERIAL_CORE_CONSOLE
312 select SERIAL_CORE
314 MAX3100 chip support
319 select SERIAL_CORE
320 select REGMAP_SPI if SPI_MASTER
321 select REGMAP_I2C if I2C
326 that can be controlled through I2C or high-speed SPI.
333 select SERIAL_CORE
336 DZ11-family serial controllers for DECstations and VAXstations,
342 select SERIAL_CORE_CONSOLE
358 select SERIAL_CORE
372 select SERIAL_CORE_CONSOLE
388 select SERIAL_CORE
397 select SERIAL_CORE_CONSOLE
412 select SERIAL_CORE
413 select SERIAL_8250_PXA if SERIAL_8250=y
414 select SERIAL_PXA_NON8250 if !SERIAL_8250=y
429 select SERIAL_CORE_CONSOLE
430 select SERIAL_8250_CONSOLE if SERIAL_8250=y
448 select SERIAL_CORE
449 select SERIAL_MCTRL_GPIO if GPIOLIB
459 select SERIAL_CORE_CONSOLE
474 select SERIAL_CORE
475 select RATIONAL
476 select SERIAL_MCTRL_GPIO if GPIOLIB
484 select SERIAL_CORE_CONSOLE
499 select SERIAL_CORE
500 select SERIAL_EARLYCON
501 select SERIAL_CORE_CONSOLE
510 select SERIAL_CORE
520 select SERIAL_CORE_CONSOLE
521 select SERIAL_EARLYCON
539 select SERIAL_CORE
540 select SERIAL_CORE_CONSOLE
577 select SERIAL_CORE
596 select SERIAL_CORE_CONSOLE
625 select SERIAL_CORE
633 select SERIAL_CORE_CONSOLE
638 select SERIAL_CORE
639 select SERIAL_MCTRL_GPIO if GPIOLIB
653 select SERIAL_CORE_CONSOLE
659 select SERIAL_CORE_CONSOLE
660 select SERIAL_EARLYCON
672 select SERIAL_CORE
682 select SERIAL_CORE_CONSOLE
700 select SERIAL_CORE
716 select SERIAL_CORE_CONSOLE
723 select SERIAL_CORE
733 The pmac_zilog driver for the z85C30 chip on many powermacs
741 the pmac_zilog and 8250 drivers to co-exist, but may cause
743 access the built-in serial ports on powermacs will need to
748 unable to use the 8250 module for PCMCIA or other 16C550-style
757 select SERIAL_CORE_CONSOLE
766 select SERIAL_CORE
774 select SERIAL_CORE_CONSOLE
790 select SERIAL_CORE
801 select SERIAL_CORE_CONSOLE
811 select SERIAL_CORE
821 select SERIAL_CORE_CONSOLE
823 Select this options if you'd like to use one of the PSC serial port
831 Select the MPC52xx console baud rate.
839 select SERIAL_CORE
840 select FW_LOADER
852 select SERIAL_CORE
866 select SERIAL_CORE_CONSOLE
875 select SERIAL_CORE
880 box, for instance in order to become a dial-in server. This driver
889 tristate "MSM on-chip serial port support"
891 select SERIAL_CORE
896 select SERIAL_CORE_CONSOLE
897 select SERIAL_EARLYCON
900 tristate "QCOM on-chip GENI based serial port support"
903 select SERIAL_CORE
908 select SERIAL_CORE_CONSOLE
909 select SERIAL_EARLYCON
915 bool "VIA VT8500 on-chip serial port support"
917 select SERIAL_CORE
922 select SERIAL_CORE_CONSOLE
927 select SERIAL_CORE
933 with the omap-serial driver. DMA support can be enabled from platform
939 select SERIAL_CORE_CONSOLE
941 Select this option if you would like to use omap serial port as
955 select SERIAL_CORE
957 Select this option if you are building a kernel for a device that
965 select SERIAL_CORE_CONSOLE
966 select SERIAL_EARLYCON
968 Select this option if you would like to use a SiFive UART as the
981 select SERIAL_CORE
984 To compile this driver as a module, select M here. The
990 select SERIAL_CORE_CONSOLE
991 select SERIAL_EARLYCON
993 Select this option if you would like to use a Lantiq UART as the
999 select SERIAL_CORE
1000 select FW_LOADER
1007 select SERIAL_CORE
1016 select SERIAL_CORE_CONSOLE
1025 select SERIAL_CORE
1030 SC16IS760 and SC16IS762. Select supported buses using options below.
1036 select SERIAL_SC16IS7XX_CORE if SERIAL_SC16IS7XX
1037 select REGMAP_I2C if I2C
1043 You must select at least one bus for the driver to be built.
1049 select SERIAL_SC16IS7XX_CORE if SERIAL_SC16IS7XX
1050 select REGMAP_SPI if SPI_MASTER
1055 You must select at least one bus for the driver to be built.
1059 select SERIAL_CORE
1066 select SERIAL_CORE
1076 BCM7xxx (STB) - DOCSIS console
1081 select SERIAL_CORE_CONSOLE
1082 select SERIAL_EARLYCON
1090 select SERIAL_CORE
1097 select SERIAL_CORE_CONSOLE
1103 select SERIAL_CORE
1110 select SERIAL_CORE_CONSOLE
1111 select SERIAL_EARLYCON
1118 select SERIAL_CORE_CONSOLE
1125 select SERIAL_CORE
1150 select SERIAL_CORE_CONSOLE
1151 select SERIAL_EARLYCON
1158 select SERIAL_CORE
1166 ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is
1168 ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
1174 select SERIAL_CORE_CONSOLE
1183 select SERIAL_CORE
1184 select SERIAL_MCTRL_GPIO if GPIOLIB
1192 select SERIAL_CORE_CONSOLE
1199 select SERIAL_CORE
1207 select SERIAL_CORE_CONSOLE
1208 select SERIAL_EARLYCON
1215 select SERIAL_CORE
1216 select SERIAL_MCTRL_GPIO if GPIOLIB
1219 built-in UART of the SoC, say Y to this option.
1227 select SERIAL_CORE_CONSOLE
1229 Enable a built-in UART port of the AR933X to be the system console.
1242 select SERIAL_CORE_CONSOLE
1243 select SERIAL_EARLYCON
1248 select SERIAL_CORE
1254 select SERIAL_CORE
1256 Driver for on-chip UART for ARC(Synopsys) for the legacy
1262 select SERIAL_CORE_CONSOLE
1263 select SERIAL_EARLYCON
1279 select SERIAL_CORE
1303 select SERIAL_CORE
1305 Support for the on-chip lpuart on some Freescale SOCs.
1310 select SERIAL_CORE_CONSOLE
1311 select SERIAL_EARLYCON
1319 select SERIAL_CORE
1321 Support for the on-chip LINFlexD UART on some Freescale SOCs.
1326 select SERIAL_CORE_CONSOLE
1327 select SERIAL_EARLYCON
1335 select SERIAL_CORE
1337 Support for the on-chip USART on Conexant Digicolor SoCs.
1342 select SERIAL_CORE_CONSOLE
1349 select SERIAL_CORE
1352 This driver is for the on-chip Asynchronous Serial Controller on
1362 select SERIAL_CORE_CONSOLE
1366 select SERIAL_CORE
1369 Say yes here to enable support for the MEN 16z135 High Speed UART IP-Core
1377 select SERIAL_CORE
1385 select SERIAL_CORE_CONSOLE
1386 select SERIAL_EARLYCON
1395 select SERIAL_CORE
1397 select SERIAL_MCTRL_GPIO if GPIOLIB
1399 This driver is for the on-chip Serial Controller on
1409 select SERIAL_CORE_CONSOLE
1410 select SERIAL_EARLYCON
1416 select SERIAL_CORE
1419 based on the Armada-3700 SoC and wish to use the on-board serial
1427 select SERIAL_CORE_CONSOLE
1428 select SERIAL_EARLYCON
1431 Say 'Y' here if you wish to use Armada-3700 UART as the system console.
1439 select SERIAL_CORE
1442 Say 'Y' here if you wish to use the on-board serial port.
1448 select SERIAL_CORE_CONSOLE
1449 select SERIAL_EARLYCON
1458 select SERIAL_CORE
1461 Say 'Y' here if you wish to use the on-board serial port.
1467 select SERIAL_CORE_CONSOLE
1468 select SERIAL_EARLYCON
1478 select SERIAL_CORE
1483 int "Maximum number of CSIO/UART ports (1-8)"
1492 select SERIAL_CORE_CONSOLE
1493 select SERIAL_EARLYCON
1505 select SERIAL_CORE
1507 This driver is for the FPGA-based LiteUART serial controller from LiteX
1524 select SERIAL_CORE_CONSOLE
1525 select SERIAL_EARLYCON
1527 Say 'Y' or 'M' here if you wish to use the FPGA-based LiteUART serial
1536 select SERIAL_CORE
1538 Select this option if you would like to use Sunplus serial port on
1543 called sunplus-uart.
1548 select SERIAL_CORE_CONSOLE
1549 select SERIAL_EARLYCON
1551 Select this option if you would like to use a Sunplus UART as the
1561 select SERIAL_CORE
1572 select SERIAL_CORE_CONSOLE
1574 Select this options if you'd like to use the UART port0 of the