53 	dev_dbg(&client->dev, "%s:on:%d\n", __func__, on);  in nct3018y_set_alarm_mode()
57 		dev_dbg(&client->dev,  in nct3018y_set_alarm_mode()
70 		dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_CTRL\n");  in nct3018y_set_alarm_mode()
76 		dev_dbg(&client->dev,  in nct3018y_set_alarm_mode()
84 		dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_ST\n");  in nct3018y_set_alarm_mode()
97 		dev_dbg(&client->dev, "%s:NCT3018Y_REG_CTRL\n", __func__);  in nct3018y_get_alarm_mode()
105 		dev_dbg(&client->dev, "%s:NCT3018Y_REG_ST\n", __func__);  in nct3018y_get_alarm_mode()
112 	dev_dbg(&client->dev, "%s:alarm_enable:%x alarm_flag:%x\n",  in nct3018y_get_alarm_mode()
126 	dev_dbg(&client->dev, "%s:irq:%d\n", __func__, irq);  in nct3018y_irq()
132 		dev_dbg(&client->dev, "%s:alarm flag:%x\n",  in nct3018y_irq()
136 		dev_dbg(&client->dev, "%s:IRQ_HANDLED\n", __func__);  in nct3018y_irq()
158 		dev_dbg(&client->dev, " voltage <=1.7, date/time is not reliable.\n");  in nct3018y_rtc_read_time()
186 		dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_SC\n");  in nct3018y_rtc_set_time()
193 		dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_MN\n");  in nct3018y_rtc_set_time()
200 		dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_HR\n");  in nct3018y_rtc_set_time()
211 		dev_dbg(&client->dev, "Unable to write for day and mon and year\n");  in nct3018y_rtc_set_time()
227 		dev_dbg(&client->dev, "Unable to read date\n");  in nct3018y_rtc_read_alarm()
231 	dev_dbg(&client->dev, "%s: raw data is sec=%02x, min=%02x hr=%02x\n",  in nct3018y_rtc_read_alarm()
242 	dev_dbg(&client->dev, "%s:s=%d m=%d, hr=%d, enabled=%d, pending=%d\n",  in nct3018y_rtc_read_alarm()
254 	dev_dbg(dev, "%s, sec=%d, min=%d hour=%d tm->enabled:%d\n",  in nct3018y_rtc_set_alarm()
260 		dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_SCA\n");  in nct3018y_rtc_set_alarm()
266 		dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_MNA\n");  in nct3018y_rtc_set_alarm()
272 		dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_HRA\n");  in nct3018y_rtc_set_alarm()
281 	dev_dbg(dev, "%s: alarm enable=%d\n", __func__, enabled);  in nct3018y_irq_enable()
476 		dev_dbg(&client->dev, "%s: read error\n", __func__);  in nct3018y_probe()
479 		dev_dbg(&client->dev, "%s: NCT3018Y_BIT_TWO is set\n", __func__);  in nct3018y_probe()
485 		dev_dbg(&client->dev, "Unable to write NCT3018Y_REG_CTRL\n");  in nct3018y_probe()
492 		dev_dbg(&client->dev, "%s: write error\n", __func__);  in nct3018y_probe()
510 			dev_dbg(&client->dev, "unable to request IRQ %d\n", client->irq);  in nct3018y_probe()