Lines Matching full:if
19 Generic RTC class support. If you say yes here, you will
23 if RTC_CLASS
29 If you say yes here, the system time (wall clock) will be set using
48 If the clock you specify here is not battery backed, it may still
57 If you say yes here, the system time (wall clock) will be stored
59 minutes if userspace reports synchronized NTP status.
64 default RTC_HCTOSYS_DEVICE if RTC_HCTOSYS
79 tristate "KUnit test for RTC lib functions" if !KUNIT_ALL_TESTS
85 If unsure, say N.
102 Say yes here if you want to use your RTCs using sysfs interfaces,
105 If unsure, say Y.
112 Say yes here if you want to use your system clock RTC through
115 If there is no RTC for the system clock, then the first RTC(rtc0)
118 If unsure, say Y.
124 Say yes here if you want to use your RTCs using the /dev
133 If unsure, say Y.
139 Provides an emulation for RTC_UIE if the underlying rtc chip
145 only if you know that you really need it.
150 If you say yes here you get support for the
154 You want this driver only if you are doing development
158 This driver can also be built as a module. If so, the module
163 if I2C
169 If you say yes here you get support for RTC function in Marvell
172 This driver can also be built as a module. If so, the module
179 If you say yes here you get support for RTC function in Marvell
182 This driver can also be built as a module. If so, the module
189 If you say yes here you get support for the Abracon
192 This driver can also be built as a module. If so, the module
199 If you say yes here you get support for the Abracon
202 This driver can also be built as a module. If so, the module
207 select WATCHDOG_CORE if WATCHDOG
209 If you say yes here you get support for Abracon AB080X and AB180X
213 This driver can also be built as a module. If so, the module
220 If you say yes here you get support for the real-time clock found
223 This driver can also be built as a module. If so, the module
231 If you say yes here you get support for the wake-timer found on
234 This driver can also be built as a module. If so, the module will
241 If you say yes here you get support for the RTC of ams AS3722 PMIC
244 This driver can also be built as a module. If so, the module
250 select WATCHDOG_CORE if WATCHDOG
252 If you say yes here you get support for various compatible RTC
264 This driver can also be built as a module. If so, the module
275 Setting this option will add proper support for the century bit but if
284 If you say yes here you get support for Dallas Semiconductor
285 DS1374 real-time clock chips. If an interrupt is associated
288 This driver can also be built as a module. If so, the module
296 If you say Y here you will get support for the
303 If you say yes here you get support for the
306 This driver can also be built as a module. If so, the module
317 This driver can also be built as a module. If so, the module
329 If you say yes here you will get support for the
332 This driver can also be built as a module. If so, the module
340 If you say yes here you will get support for the
343 This driver can also be built as a module. If so, the module
350 If you say yes here you will get support for the
353 This driver can also be built as a module. If so, the module
360 If you say yes here you will get support for the
363 This driver can also be built as a module. If so, the module
370 If you say yes here you will get support for the
373 This driver can also be built as a module. If so, the module
380 If you say yes here you will get support for the
383 This driver can also be built as a module. If so, the module
390 If you say yes here you get support for the Nuvoton NCT3018Y I2C RTC
393 This driver can also be built as a module, if so, the module will be
400 If you say yes here you will get support for the
403 This driver can also be built as a module. If so, the module
409 If you say yes here you get support for the
412 This driver can also be built as a module. If so, the module
418 If you say yes here you get support for the
421 This driver can also be built as a module. If so, the module
428 If you say yes here you get support for the
431 This driver can also be built as a module. If so, the module
438 If you say yes here you get support for the
441 This driver can also be built as a module. If so, the module
447 If you say yes here you get support for the
450 This driver can also be built as a module. If so, the module
457 If you say yes here you get support for the NXP PCF8523 RTC
460 This driver can also be built as a module. If so, the module
467 If you say yes here you get support for the PCF85063 RTC chip
469 This driver can also be built as a module. If so, the module
476 If you say yes here you get support for the PCF85363 RTC chip.
478 This driver can also be built as a module. If so, the module
487 If you say yes here you get support for the
491 This driver can also be built as a module. If so, the module
497 If you say yes here you get support for the Philips PCF8583
503 This driver can also be built as a module. If so, the module
509 If you say Y here you will get support for the ST M41T60
514 This driver can also be built as a module. If so, the module
521 If you say Y here you will get support for the
528 If you say Y here you will get support for the RTC
531 This driver can also be built as a module. If so, the module
537 If you say Y here you will get support for the TI
540 This driver can also be built as a module. If so, the module
547 If you say yes here you get support for the RTC on the
557 If you say yes here you get support for the RTC on the
560 This driver can also be built as a module. If so, the module
567 If you say yes here you get support for the RTC of TI PALMA series PMIC
570 This driver can also be built as a module. If so, the module
585 If you say yes here you get support for the RTC on the
588 This driver can also be built as a module. If so, the module
595 If you say yes here you get support for the RTC on the
598 This driver can also be built as a module. If so, the module
605 If you say yes here you get support for the RTC on the
608 This driver can also be built as a module. If so, the module
615 If you say yes here you will get support for the Seiko
618 This driver can also be built as a module. If so the module
624 If you say Y here you will get support for the
629 This driver can also be built as a module. If so the module
636 If you say yes here you get support for the Epson RX8010SJ RTC
639 This driver can also be built as a module. If so, the module
646 If you say yes here you will get support for the Epson RX-8571/
649 This driver can also be built as a module. If so the module
655 If you say yes here you get support for the Epson
658 This driver can also be built as a module. If so, the module
664 If you say yes here you get support for the EM
667 This driver can also be built as a module. If so, the module
674 If you say yes here you get support for the Micro Crystal
677 This driver can also be built as a module. If so, the module
684 If you say yes here you get support for the Micro Crystal
687 This driver can also be built as a module. If so, the module
693 If you say yes here you get support for the Micro Crystal RV8803 and
696 This driver can also be built as a module. If so, the module
705 If you say yes here you will get support for the
708 This driver can also be built as a module. If so, the module
715 If you say yes here you get support for the ZXW Shenzhen whwave
718 This driver can also be built as a module. If so, the module
725 if SPI_MASTER
730 If you say yes here you will get support for the
733 This driver can also be built as a module. If so, the module
739 If you say yes here you will get support for the
742 This driver can also be built as a module. If so, the module
749 If you say yes here you get support for the Dallas DS1302 RTC chips.
751 This driver can also be built as a module. If so, the module
761 This driver can also be built as a module. If so, the module
768 If you say yes here you get support for the
772 This driver can also be built as a module. If so, the module
779 If you say yes here you get support for the
785 This driver can also be built as a module. If so, the module
791 If you say yes here you get support for the
797 This driver can also be built as a module. If so, the module
803 If you say yes here you will get support for the
809 This driver can also be built as a module. If so, the module
815 If you say yes here you will get support for the
818 This driver can also be built as a module. If so, the module
824 If you say yes here you will get support for the Epson RX-4581.
826 This driver can also be built as a module. If so the module
832 If you say yes here you get support for the
835 This driver can also be built as a module. If so, the module
841 If you say yes here you will get support for the
844 This driver can also be built as a module. If so, the module
851 If you say yes here you get support for the NXP PCF2123
854 This driver can also be built as a module. If so, the module
860 If you say yes here you will get support for the Microchip MCP795.
862 This driver can also be built as a module. If so the module
873 default m if I2C=m
874 default y if I2C=y
875 default y if SPI_MASTER=y
882 select REGMAP_I2C if I2C
883 select REGMAP_SPI if SPI_MASTER
885 If you say yes here you get support for Dallas Semiconductor
886 DS3232 and DS3234 real-time clock chips. If an interrupt is associated
889 This driver can also be built as a module. If so, the module
897 Say Y here if you want to expose temperature sensor data on
903 select REGMAP_I2C if I2C
904 select REGMAP_SPI if SPI_MASTER
905 select WATCHDOG_CORE if WATCHDOG
907 If you say yes here you get support for the NXP PCF2127/29/31 RTC
915 This driver can also be built as a module. If so, the module
921 select REGMAP_I2C if I2C
922 select REGMAP_SPI if SPI_MASTER
924 If you say yes here you get support for the Micro Crystal
927 This driver can also be built as a module. If so, the module
936 Say Y here if you want to expose temperature sensor data on
942 select REGMAP_SPI if SPI_MASTER
943 select REGMAP_I2C if I2C
945 If you say yes here you will get support for the Epson RX-6110.
947 This driver can also be built as a module. If so the module
960 default y if X86
971 you can safely enable this driver if you don't know whether
974 This driver can also be built as a module. If so, the module
985 system, specifically MC146818 compatibles. If in doubt, say Y.
991 If you say yes here you get support for the Dallas DS1216 RTC chips.
997 If you say yes here you get support for the Dallas DS1286 RTC chips.
1003 If you say yes here you get support for the
1006 This driver can also be built as a module. If so, the module
1013 If you say yes here you get support for the
1016 This driver can also be built as a module. If so, the module
1023 If you say yes here you get support for the Dallas/Maxim DS1685
1028 This driver can also be built as a module. If so, the module
1091 If you say yes here you get support for the
1094 This driver can also be built as a module. If so, the module
1100 If you say yes here you get support for the
1103 This driver can also be built as a module. If so, the module
1117 If you say yes here you will get support for the
1120 This driver can also be built as a module. If so, the module
1127 If you say yes here you will get support for the RTC subsystem
1130 This driver can also be built as a module. If so, the module
1137 If you say yes here you will get support for the EFI
1140 This driver can also be built as a module. If so, the module
1147 If you say yes here you get support for the
1150 This driver can also be built as a module. If so, the module
1157 If you say Y here you will get support for the
1160 This driver can also be built as a module. If so, the module
1167 If you say Y here you will get support for the
1170 This driver can also be built as a module, if so, the module
1177 If you say Y here you will get support for the
1183 This driver can also be built as a module, if so, the module
1190 If you say yes here you get support for the Oki MSM6242
1193 This driver can also be built as a module. If so, the module
1201 If you say Y here you will get support for the TI
1204 This driver can also be built as a module. If so, the module
1211 If you say yes here you get support for the Ricoh RP5C01
1215 This driver can also be built as a module. If so, the module
1223 If you say yes here you will get support for the RTC subsystem
1226 This driver can also be built as a module. If so, the module
1233 If you say yes here you will get support for the RTC subsystem
1236 This driver can also be built as a module. If so, the module
1243 If you say yes here you will get support for the RTC subsystem
1246 This driver can also be built as a module. If so, the module
1253 If you say Y here you will get support for the RTC subsystem
1257 This driver can also be built as a module. If so, the module
1265 If you say Y here you will get support for the RTC found on
1272 If you say yes here you get support for the RTC subsystem of the
1289 If you say yes here you get support for the PowerNV platform RTC
1292 This driver can also be built as a module. If so, the module
1302 This driver can also be built as a module. If so, the module
1309 If you say yes here you get support for the RTC controller found on
1316 If you say yes here you will get support for the
1319 This driver can also be built as a module. If so, the module
1326 Say yes here if you want to support the RTC functionality of the
1336 If you say yes here you get support for the RTC on the
1339 This driver can also be built as a module. If so, the module
1346 If you say yes here you get support for the RTC on Conexant
1349 This driver can also be built as a module. If so, the module
1359 This driver can also be built as a module, if so, the module
1372 This driver can also be built as a module, if so, the module
1383 This driver can also be built as a module, if so, the module
1389 default m if ARCH_MESON
1391 If you say yes here you will get support for the
1394 This driver can also be built as a module. If so, the module
1407 This driver can also be built as a module, if so, module
1420 This driver can also be build as a module. If so, the module
1427 If you say yes here you get support for the
1430 This driver can also be built as a module. If so, the module
1437 If you say Y here you will get access to the real time clock
1463 This driver can also be built as a module. If so, the module
1470 If you say Y here you will get access to ARM AMBA
1480 If you say Y here you will get access to ARM AMBA
1517 This driver can also be built as a module. If so, the module
1524 If you say yes here you get support for the Ricoh RS5C313 RTC chips.
1531 If you say yes here you get support for the Renesas RZ/N1 RTC.
1540 RTC abstraction. If you do not know what you are doing, you should
1548 If you say Y here you will get access to the real time clock
1559 If you say Y here you will get access to the real time clock
1567 If you say Y here you will get support for the Hypervisor
1576 If you say Y here you will get support for the RTC found in
1583 If you say Y here you will get support for the RTC found on
1590 If you say Y here you will get support for the RTC found on
1597 If you say yes here you will get support for the in-chip RTC
1601 This driver can also be built as a module. If so, the module
1609 If you say yes here you will get support for the in-chip RTC
1612 This driver can also be built as a module. If so, the module
1619 If you say Y here you will get access to Cadence RTC IP
1630 If you say Y here you will get support for the
1633 This driver can also be built as a module. If so, the module
1640 If you say yes here you will get support for the RTC on PS3.
1642 This driver can also be built as a module. If so, the module
1650 If you say yes here you will get support for the onboard
1653 This driver can also be built as a module. If so, the module
1660 If you say Y here you will get support for the RTC found on
1674 If you say yes here you will get support for the
1677 This driver can also be built as a module. If so, the module
1685 If you say yes here you get support for the Ingenic JZ47xx SoCs RTC
1688 This driver can also be built as a module. If so, the module
1701 This driver can also be built as a module. If so, the module
1712 If you have one of the devices above enable this driver to use
1713 the hardware RTC. This driver can also be built as a module. If
1722 This driver can also be built as a module. If so, the module
1729 If you say yes here you get support for the
1739 If you say yes here you get support for the
1742 This drive can also be built as a module. If so, the module
1751 If you say yes here you get support for the Freescale MXC
1754 This driver can also be built as a module, if so, the module
1763 If you say yes here you get support for the Freescale MXC
1766 This driver can also be built as a module, if so, the module
1776 If you say yes here you get support for the Freescale SNVS
1779 This driver can also be built as a module, if so, the module
1789 If you say yes here you get support for the NXP BBNSM RTC module.
1791 This driver can also be built as a module, if so, the module
1799 If you say yes here you get support for the NXP i.MX System
1817 If you say yes here you get support for the MOXA ART
1820 This driver can also be built as a module. If so, the module
1830 This drive can also be built as a module. If so, the module
1841 If you want to use MediaTek(R) RTC interface, select Y or M here.
1850 This drive can also be built as a module. If so, the module
1858 If you say yes here you get support for the APM X-Gene SoC real time
1861 This driver can also be built as a module, if so, the module
1869 If you say yes here you get support for the PIC32 RTC module.
1871 This driver can also be built as a module. If so, the module
1879 If you say yes here you get support for the EPSON TOYOCOM
1882 This driver can also be built as a module. If so, the module
1890 If you say yes here you get support for the STM32 On-Chip
1893 This driver can also be built as a module, if so, the module
1908 If you say yes here, you get support for the RTD1295 SoC
1916 If you say yes here you get support for the ASPEED BMC SoC real time
1919 This driver can also be built as a module, if so, the module
1927 If you say yes here you get support for the Texas Instruments's
1930 This driver can also be built as a module, if so, the module
1944 If this driver is compiled as a module, it will be named
1961 If you say yes here, you get read/write support for the Real Time
1964 This can also be built as a module. If so, the module will
1971 If you say yes here you get support for the Mstar MSC313e On-Chip
1974 This driver can also be built as a module, if so, the module
1981 If you say yes here you will get support for the
1984 This driver can also be built as a module, if so, the module