Lines Matching refs:reset
11 This framework is designed to abstract reset handling of devices
12 via GPIOs or SoC-internal reset controller modules.
22 This option enables support for the external reset functions for
29 This enables the ATH79 reset controller driver that supports the
30 AR71xx SoC reset controller.
36 This enables the reset controller driver for AXS10x.
43 This enables the reset controller driver for BCM6345 SoCs.
50 This enables the reset controller driver for Marvell Berlin SoCs.
53 tristate "Broadcom STB reset controller"
57 This enables the reset controller driver for Broadcom STB SoCs using
61 tristate "Broadcom STB RESCAL reset controller"
66 This enables the RESCAL reset controller for SATA, PCIe0, or PCIe1 on
74 This enables the reset controller driver for HSDK board.
83 This enables the reset controller driver for i.MX7 SoCs.
91 This enables the reset controller driver for Intel Gateway SoCs.
92 Say Y to control the reset signals provided by reset controller.
101 Support for the Canaan Kendryte K210 RISC-V SoC reset controller.
102 Say Y if you want to control reset signals provided by this
109 This enables the reset controller driver for Lantiq / Intel XWAY SoCs.
115 This enables the reset controller driver for NXP LPC18xx/43xx SoCs.
118 bool "Microchip Sparx5 reset driver"
123 This driver supports switch core reset for the Microchip Sparx5 SoC.
130 This enables the reset driver for Amlogic Meson SoCs.
136 This enables the reset driver for Audio Memory Arbiter of
143 This enables the reset controller driver for Nuvoton NPCM
151 This enables the reset controller driver for Nuvoton MA35D1 SoC.
157 This enables the reset driver for ImgTec Pistachio SoCs.
165 This driver supports peripheral reset for the Microchip PolarFire SoC
171 This enables the AOSS (always on subsystem) reset driver
173 reset signals provided by AOSS for Modem, Venus, ADSP,
180 This enables the PDC (Power Domain Controller) reset driver
182 to control reset signals provided by PDC for Modem, Compute,
192 relevant. This driver provides a reset controller capable of
194 initialization routines as reset lines.
201 controls reset and power down of the USB/PHY.
208 This driver provides support for reset signal/domains that are
212 firmware controlling all the reset signals.
219 This enables a simple reset controller driver for reset lines that
228 - RCC reset controller in STM32 MCUs
237 This enables the reset driver for the SoCFPGA ARMv7 platforms. This
244 This enables the reset driver support for Sunplus SoCs.
245 The reset lines that can be asserted and deasserted by toggling bits
247 which means each register holds 16 reset lines.
254 This enables the reset driver for Allwinner SoCs.
257 tristate "TI System Control Interface (TI-SCI) reset driver"
260 This enables the reset driver support over TI System Control Interface
261 available on some new TI's SoCs. If you wish to use reset resources
269 This enables the reset driver support for TI devices with
270 memory-mapped reset registers as part of a syscon device node. If
271 you wish to use the reset framework for such memory-mapped devices,
278 This enables the reset driver support for TI TPS380x devices. If
279 you wish to use the reset framework for such devices, say Y here.
283 tristate "Delta Networks TN48M switch CPLD reset controller"
287 This enables the reset controller driver for the Delta TN48M CPLD.
288 It provides reset signals for Armada 7040 and 385 SoC-s, Alleycat 3X
293 called reset-tn48m.
301 Support for reset controllers on UniPhier SoCs.
302 Say Y if you want to control reset signals provided by System Control
311 Support for peripheral core reset included in its own glue layer
312 on UniPhier SoCs. Say Y if you want to control reset signals
319 This enables the reset controller driver for Xilinx Zynq SoCs.
321 source "drivers/reset/starfive/Kconfig"
322 source "drivers/reset/sti/Kconfig"
323 source "drivers/reset/hisilicon/Kconfig"
324 source "drivers/reset/tegra/Kconfig"