Lines Matching full:valid
186 * Field only valid when for the received frame type the corresponding
190 * Field only valid when for the received frame type the corresponding
254 * Field only valid when AST_based_lookup_valid == 1.
277 * Field only valid when key_type is set to wep_varied_width.
285 * Field only valid when bssid_hit is set.
290 * Field only valid when mpdu_qos_control_valid is set
322 * When set, AST based lookup for this frame has found a valid
347 * When set, the field Mpdu_Frame_control_field has valid information
350 * When set, the field Mpdu_duration_field has valid information
353 * When set, the fields mac_addr_adx_..... have valid information
358 * have valid information as well as field
364 * When set, the field mpdu_qos_control_field, mpdu_ht_control has valid
371 * PN are valid
376 * Field only valid when Mpdu_sequence_control_valid is set
386 * Field only valid when Mpdu_frame_control_valid is set
391 * Field only valid when Mpdu_frame_control_valid is set
396 * Field only valid when Mpdu_frame_control_valid is set.
400 * Field only valid when Mpdu_frame_control_valid is set.
401 * Retry bit from the frame control. Only valid when first_msdu is set
404 * Field only valid when Mpdu_sequence_control_valid is set.
409 * Field only valid when Frame_encryption_info_valid is set
462 * 0. The PPDU start status will only be valid when this bit
472 * Only valid when first_msdu is set. Indicates no AST matching
476 * Only valid when first_msdu is set. Indicates an unsuccessful
532 * Frame control field in header. Only valid when the field is marked valid.
535 * Duration field in header. Only valid when the field is marked valid.
538 * MAC addresses in the received frame. Only valid when corresponding
539 * address valid bit is set
542 * QoS/HT control fields from header. Valid only when corresponding fields
543 * are marked valid
569 * Multi-link receiver address1,2. Only valid when corresponding
570 * valid bit is set
805 * MPDU length before decapsulation. Only valid when first_msdu is
837 * da_offset field is valid. This will be set to 0 in case
841 * sa_offset field is valid. This will be set to 0 in case
884 * Indicates that OLE found a valid SA entry.
887 * Indicates that OLE found a valid DA entry.
890 * Field Only valid if da_is_valid is set. Indicates the DA address
905 * valid when last_msdu is set.
995 * flow id is not valid.
1011 * The key ID octet from the IV. Only valid when first_msdu is set.
1054 * This field is still valid for MPDU frames without A-MSDU.
1067 * decapsulation. The latter is only valid if ipv4_proto or
1075 * L4 offset in bytes from the start of RX_HEADER (only valid
1078 * the start of the IP header after decapsulation (Only valid if
1168 * Field only valid when pkt type is HT, VHT or HE. Values are
1183 * Field only valid when
1199 * are all valid. This bit is in the last 64-bit of the descriptor
1242 * 0. The PPDU start status will only be valid when this bit
1252 * Only valid when first_msdu is set. Indicates no AST matching
1256 * Only valid when first_msdu is set. Indicates an unsuccessful
1371 * flow id is not valid.
1385 * valid. This bit must be in the last octet of the