586 		DBG_PRINT(ERR_DBG,  in init_shared_mem()
601 			DBG_PRINT(ERR_DBG, "Fifo %d: Invalid length (%d) - "  in init_shared_mem()
702 			DBG_PRINT(ERR_DBG, "%s: Ring%d RxD count is not a "  in init_shared_mem()
1058 		DBG_PRINT(ERR_DBG, "%s: Device is on PCI-E bus\n",  in s2io_print_pci_mode()
1093 	DBG_PRINT(ERR_DBG, "%s: Device is on %d bit %s\n",  in s2io_print_pci_mode()
1203 		DBG_PRINT(ERR_DBG, "ERROR: Setting Swapper failed\n");  in init_nic()
1635 			DBG_PRINT(ERR_DBG,  in init_nic()
1714 				DBG_PRINT(ERR_DBG, "%s: RTI init failed\n",  in init_nic()
2125 		DBG_PRINT(ERR_DBG, "TDMA is not ready!\n");  in verify_xena_quiescence()
2129 		DBG_PRINT(ERR_DBG, "RDMA is not ready!\n");  in verify_xena_quiescence()
2133 		DBG_PRINT(ERR_DBG, "PFC is not ready!\n");  in verify_xena_quiescence()
2137 		DBG_PRINT(ERR_DBG, "TMAC BUF is not empty!\n");  in verify_xena_quiescence()
2141 		DBG_PRINT(ERR_DBG, "PIC is not QUIESCENT!\n");  in verify_xena_quiescence()
2145 		DBG_PRINT(ERR_DBG, "MC_DRAM is not ready!\n");  in verify_xena_quiescence()
2149 		DBG_PRINT(ERR_DBG, "MC_QUEUES is not ready!\n");  in verify_xena_quiescence()
2153 		DBG_PRINT(ERR_DBG, "M_PLL is not locked!\n");  in verify_xena_quiescence()
2165 		DBG_PRINT(ERR_DBG, "P_PLL is not locked!\n");  in verify_xena_quiescence()
2170 		DBG_PRINT(ERR_DBG, "RC_PRC is not QUIESCENT!\n");  in verify_xena_quiescence()
2274 		DBG_PRINT(ERR_DBG, "%s: device is not ready, "  in start_nic()
2922 			DBG_PRINT(ERR_DBG, "%s: NULL skb in Rx Intr\n",  in rx_intr_handler()
3053 			DBG_PRINT(ERR_DBG, "%s: NULL skb in Tx Free Intr\n",  in tx_intr_handler()
3193 				DBG_PRINT(ERR_DBG,  in s2io_chk_xpak_counter()
3195 				DBG_PRINT(ERR_DBG,  in s2io_chk_xpak_counter()
3199 				DBG_PRINT(ERR_DBG,  in s2io_chk_xpak_counter()
3201 				DBG_PRINT(ERR_DBG,  in s2io_chk_xpak_counter()
3205 				DBG_PRINT(ERR_DBG,  in s2io_chk_xpak_counter()
3207 				DBG_PRINT(ERR_DBG,  in s2io_chk_xpak_counter()
3211 				DBG_PRINT(ERR_DBG,  in s2io_chk_xpak_counter()
3248 		DBG_PRINT(ERR_DBG,  in s2io_updt_xpak_counter()
3256 		DBG_PRINT(ERR_DBG, "Incorrect value at PMA address 0x0000 - "  in s2io_updt_xpak_counter()
3435 		DBG_PRINT(ERR_DBG, "%s SW_Reset failed!\n", __func__);  in s2io_reset()
3552 			DBG_PRINT(ERR_DBG, "%s: Endian settings are wrong, "  in s2io_set_swapper()
3585 			DBG_PRINT(ERR_DBG,  in s2io_set_swapper()
3646 		DBG_PRINT(ERR_DBG,  in s2io_set_swapper()
3669 		DBG_PRINT(ERR_DBG, "XMSI # %d Access failed\n", i);  in wait_for_msix_trans()
3692 			DBG_PRINT(ERR_DBG, "%s: index: %d failed\n",  in restore_xmsi_data()
3712 			DBG_PRINT(ERR_DBG, "%s: index: %d failed\n",  in store_xmsi_data()
3786 		DBG_PRINT(ERR_DBG, "Enabling MSI-X failed\n");  in s2io_enable_msi_x()
3831 		DBG_PRINT(ERR_DBG, "%s: PCI %s: cannot assign irq %d\n",  in s2io_test_msi()
3849 		DBG_PRINT(ERR_DBG, "%s: PCI %s: No interrupt was generated "  in s2io_test_msi()
3925 		DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n",  in s2io_open()
3931 		DBG_PRINT(ERR_DBG, "Set Mac Address Failed\n");  in s2io_open()
4983 			DBG_PRINT(ERR_DBG,  in s2io_set_multicast()
5009 				DBG_PRINT(ERR_DBG,  in s2io_set_multicast()
5039 				DBG_PRINT(ERR_DBG,  in s2io_set_multicast()
5112 		DBG_PRINT(ERR_DBG,  in do_s2io_add_mc()
5163 	DBG_PRINT(ERR_DBG, "MAC address 0x%llx not found in CAM\n",  in do_s2io_delete_unicast_mc()
5251 		DBG_PRINT(ERR_DBG, "CAM full no space left for Unicast MAC\n");  in do_s2io_prog_unicast()
5711 			DBG_PRINT(ERR_DBG, "Read of VPD data failed\n");  in s2io_vpd_read()
5774 			DBG_PRINT(ERR_DBG, "Read of EEPROM failed\n");  in s2io_ethtool_geeprom()
5805 		DBG_PRINT(ERR_DBG,  in s2io_ethtool_seeprom()
5821 			DBG_PRINT(ERR_DBG,  in s2io_ethtool_seeprom()
5885 		DBG_PRINT(ERR_DBG, "Write Test level %d fails\n", 1);  in s2io_register_test()
5893 		DBG_PRINT(ERR_DBG, "Write Test level %d fails\n", 2);  in s2io_register_test()
5941 		DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x4F0. "  in s2io_eeprom_test()
5963 		DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x7F0. "  in s2io_eeprom_test()
6210 			DBG_PRINT(ERR_DBG, "%s: is not up, cannot run test\n",  in s2io_ethtool_test()
6645 			DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n",  in s2io_change_mtu()
6713 				DBG_PRINT(ERR_DBG,  in s2io_set_link()
6915 		DBG_PRINT(ERR_DBG, "%s: Defaulting to INTA\n", dev->name);  in s2io_add_isr()
6958 					DBG_PRINT(ERR_DBG,  in s2io_add_isr()
6970 					DBG_PRINT(ERR_DBG,  in s2io_add_isr()
6974 					DBG_PRINT(ERR_DBG,  in s2io_add_isr()
6994 			DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n",  in s2io_add_isr()
7067 			DBG_PRINT(ERR_DBG, "Device not Quiescent - "  in do_s2io_card_down()
7101 		DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n",  in s2io_card_up()
7122 			DBG_PRINT(ERR_DBG, "%s: Out of memory in Open\n",  in s2io_card_up()
7162 		DBG_PRINT(ERR_DBG, "%s: Starting NIC failed\n", dev->name);  in s2io_card_up()
7230 		DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n", dev->name);  in s2io_restart_nic()
7233 	DBG_PRINT(ERR_DBG, "%s: was reset by Tx watchdog timer\n", dev->name);  in s2io_restart_nic()
7344 			DBG_PRINT(ERR_DBG, "%s: Rx error Value: 0x%x\n",  in rx_osm_handler()
7423 					DBG_PRINT(ERR_DBG,  in rx_osm_handler()
7469 			DBG_PRINT(ERR_DBG, "%s: Link down\n", dev->name);  in s2io_link()
7477 			DBG_PRINT(ERR_DBG, "%s: Link Up\n", dev->name);  in s2io_link()
7526 		DBG_PRINT(ERR_DBG, "Requested number of tx fifos "  in s2io_verify_parm()
7534 		DBG_PRINT(ERR_DBG, "Default to %d tx fifos\n", tx_fifo_num);  in s2io_verify_parm()
7542 			DBG_PRINT(ERR_DBG,  in s2io_verify_parm()
7550 		DBG_PRINT(ERR_DBG,  in s2io_verify_parm()
7552 		DBG_PRINT(ERR_DBG, "Disabling transmit steering\n");  in s2io_verify_parm()
7557 		DBG_PRINT(ERR_DBG,  in s2io_verify_parm()
7559 		DBG_PRINT(ERR_DBG, "Default to %d rx rings\n",  in s2io_verify_parm()
7565 		DBG_PRINT(ERR_DBG, "Wrong intr_type requested. "  in s2io_verify_parm()
7573 		DBG_PRINT(ERR_DBG, "Xframe I does not support MSI_X. "  in s2io_verify_parm()
7579 		DBG_PRINT(ERR_DBG, "Requested ring mode not supported\n");  in s2io_verify_parm()
7580 		DBG_PRINT(ERR_DBG, "Defaulting to 1-buffer mode\n");  in s2io_verify_parm()
7586 			DBG_PRINT(ERR_DBG, "Requested rx ring size not "  in s2io_verify_parm()
7680 		DBG_PRINT(ERR_DBG,  in s2io_init_nic()
7693 		DBG_PRINT(ERR_DBG, "%s: Request Regions failed - %x\n",  in s2io_init_nic()
7830 		DBG_PRINT(ERR_DBG, "%s: Memory allocation failed\n", dev->name);  in s2io_init_nic()
7837 		DBG_PRINT(ERR_DBG, "%s: Neterion: cannot remap io mem1\n",  in s2io_init_nic()
7845 		DBG_PRINT(ERR_DBG, "%s: Neterion: cannot remap io mem2\n",  in s2io_init_nic()
7873 		DBG_PRINT(ERR_DBG, "%s: swapper settings are wrong\n",  in s2io_init_nic()
7883 			DBG_PRINT(ERR_DBG, "%s: Unsupported PCI bus mode\n",  in s2io_init_nic()
7901 			DBG_PRINT(ERR_DBG,  in s2io_init_nic()
8011 		DBG_PRINT(ERR_DBG, "Device registration failed\n");  in s2io_init_nic()
8016 	DBG_PRINT(ERR_DBG, "Copyright(c) 2002-2010 Exar Corp.\n");  in s2io_init_nic()
8017 	DBG_PRINT(ERR_DBG, "%s: Neterion %s (rev %d)\n", dev->name,  in s2io_init_nic()
8019 	DBG_PRINT(ERR_DBG, "%s: Driver version %s\n", dev->name,  in s2io_init_nic()
8021 	DBG_PRINT(ERR_DBG, "%s: MAC Address: %pM\n", dev->name, dev->dev_addr);  in s2io_init_nic()
8022 	DBG_PRINT(ERR_DBG, "Serial number: %s\n", sp->serial_num);  in s2io_init_nic()
8033 		DBG_PRINT(ERR_DBG, "%s: 1-Buffer receive mode enabled\n",  in s2io_init_nic()
8037 		DBG_PRINT(ERR_DBG, "%s: 2-Buffer receive mode enabled\n",  in s2io_init_nic()
8044 		DBG_PRINT(ERR_DBG, "%s: NAPI disabled\n", dev->name);  in s2io_init_nic()
8047 		DBG_PRINT(ERR_DBG, "%s: NAPI enabled\n", dev->name);  in s2io_init_nic()
8051 	DBG_PRINT(ERR_DBG, "%s: Using %d Tx fifo(s)\n", dev->name,  in s2io_init_nic()
8054 	DBG_PRINT(ERR_DBG, "%s: Using %d Rx ring(s)\n", dev->name,  in s2io_init_nic()
8059 		DBG_PRINT(ERR_DBG, "%s: Interrupt type INTA\n", dev->name);  in s2io_init_nic()
8062 		DBG_PRINT(ERR_DBG, "%s: Interrupt type MSI-X\n", dev->name);  in s2io_init_nic()
8071 		DBG_PRINT(ERR_DBG, "%s: Multiqueue support enabled\n",  in s2io_init_nic()
8074 		DBG_PRINT(ERR_DBG, "%s: Multiqueue support disabled\n",  in s2io_init_nic()
8079 		DBG_PRINT(ERR_DBG, "%s: No steering enabled for transmit\n",  in s2io_init_nic()
8083 		DBG_PRINT(ERR_DBG,  in s2io_init_nic()
8088 		DBG_PRINT(ERR_DBG,  in s2io_init_nic()
8093 	DBG_PRINT(ERR_DBG, "%s: Large receive offload enabled\n",  in s2io_init_nic()
8143 		DBG_PRINT(ERR_DBG, "Driver Data is NULL!!\n");  in s2io_rem_nic()
8446 		DBG_PRINT(ERR_DBG, "%s: Don't know, can't say!!\n", __func__);  in s2io_club_tcp_session()