Lines Matching +full:memory +full:- +full:mapped
1 # SPDX-License-Identifier: GPL-2.0-only
7 bool "Support non-linear mappings of flash chips"
13 tristate "Flash device in physical memory map"
17 ROM driver code to communicate with chips which are mapped
18 physically into the CPU's memory. You will need to configure
21 with config options or at run-time.
42 This is the physical memory location at which the flash chips
43 are mapped on your particular target board. Refer to the
44 memory map which should hopefully be in the documentation for
54 physical memory map between the chips, this could be larger
55 than the total amount of flash present. Refer to the memory
70 bool "Memory device in physical memory map based on OF description"
74 and RAM driver code to communicate with chips which are mapped
75 physically into the CPU's memory. The mapping description here is
79 bool "Baikal-T1 Boot ROMs OF-based physical memory map handling"
86 This provides some extra DT physmap parsing for the Baikal-T1
87 platforms, some detection and setting up ROMs-specific accessors.
90 bool "ARM Versatile OF-based physical memory map handling"
100 bool "Cortina Gemini OF-based physical memory map handling"
111 bool "Intel IXP4xx OF-based physical memory map handling"
122 bool "GPIO-assisted Flash Chip Support"
135 which user-programmable flash chips are connected on various
140 tristate "CFI Flash device mapped on AMD SC520 CDP"
143 The SC520 CDP board has two banks of CFI-compliant chips and one
144 Dual-in-line JEDEC chip. This 'mapping' driver supports that
148 tristate "CFI Flash device mapped on AMD NetSc520"
156 tristate "JEDEC Flash device mapped on Technologic Systems TS-5500"
161 This provides a driver for the on-board flash of the Technologic
162 System's TS-5500 board. The 2MB flash is split into 3 partitions
174 tristate "CFI Flash device mapped on Arcom SBC-GXx boards"
177 This provides a driver for the on-board flash of Arcom Control
178 Systems' SBC-GXn family of boards, formerly known as SBC-MediaGX.
185 tristate "CFI Flash device mapped on Intel XScale PXA2xx based boards"
191 tristate "Flash device mapped with DOCCS on NatSemi SCx200"
194 Enable support for a flash chip mapped using the DOCCS signal on a
206 as an MTD device - with this you can reprogram your BIOS.
215 as an MTD device - with this you can reprogram your BIOS.
224 as an MTD device - with this you can reprogram your BIOS.
233 as an MTD device - with this you can reprogram your BIOS.
242 as an MTD device - with this you can reprogram your BIOS.
269 as an MTD device - with this you can reprogram your BIOS.
281 tristate "CFI Flash device mapped on Hitachi SolutionEngine"
288 tristate "CFI Flash device mapped on StrongARM SA11x0"
296 tristate "CFI Flash device mapped on DC21285 Footbridge"
304 tristate "JEDEC Flash device mapped on impA7"
315 Mapping for accessing flash devices on add-in cards like the Intel XScale
325 Map driver for accessing PCMCIA linear flash memory cards. These
326 cards are usually around 4-16MiB in size. This does not include
352 tristate "Map driver for platform device RAM (mtd-ram)"
364 This driver enables access to the Dreamcast Visual Memory Unit (VMU).
369 vmu-flash.
376 This driver allows for discovery of PISMO modules - see
378 up to five memory devices (eg, SRAM, flash, DOC) described by an