Lines Matching full:this
5 This option provides the function gpio_led_register_device.
6 As this function is used by arch code it must not be compiled as a
12 Say Y to enable Linux LED support. This allows control of supported
20 This option enables the LED sysfs class in /sys/class/leds. You'll
21 need this to do anything useful with LEDs. If unsure, say Y.
27 This option enables the flash LED sysfs class in /sys/class/leds.
29 and kernel internal API to it. You'll need this to provide support
37 This option enables the multicolor LED sysfs class in /sys/class/leds.
39 and kernel internal API to it. You'll need this to provide support
40 for multicolor LEDs that are grouped together. This class is not
47 This option enables support for the brightness_hw_changed attribute
59 This option enables support for on-chip LED drivers found on Marvell
66 This option enables support for the AN30259A 3-channel
69 To compile this driver as a module, choose M here: the module
77 This driver makes the PC Engines APU1 front panel LEDs
83 To compile this driver as a module, choose M here: the
91 This driver adds support for controlling the front panel status
102 This option enables support for the AW20036/AW20054/AW20072 LED driver.
107 To compile this driver as a module, choose M here: the module
114 This option enables support for the AW2013 3-channel
117 To compile this driver as a module, choose M here: the module
126 This option enables support for LEDs connected to the BCM6328
135 This option enables support for LEDs connected to the BCM6358
143 This option enables support for charger and general purpose LEDs
146 To compile this driver as a module, choose M here: the module
155 This option enables support for LEDs offered by Motorola's
164 This option enables support for CR0014114 LED Board which
168 To compile this driver as a module, choose M here: the module
177 This option enables support for EL15203000 LED Board
181 To compile this driver as a module, choose M here: the module
191 This option enables basic support for the LEDs found on the front
200 This option enables support for the LCD backlight using
201 LM3530 ambient light sensor chip. This ALS chip can be
211 This option enables support for the LCD backlight using
212 LM3532 ambient light sensor chip. This ALS chip can be
221 This option enables support for the LEDs on National Semiconductor /
234 This option enables support for LEDs connected to LM3642.
244 This option enables support for the TI LM3692x family
252 This option enables support for the LEDs on Sharp Locomo.
260 This option enables support for the so called "User LED" of
268 This option enables support for on-chip LED drivers found on
276 This option enables support for the Soekris net4801 and net4826 error
284 This option enables support for the PCEngines WRAP programmable LEDs.
291 This option enables support for the front LED on Cobalt Qube series
298 This option enables support for the Cobalt Raq series LEDs.
306 This option enables support for the Left, Middle, and Right
314 Choose this option if you want to use the notification LED on
322 This option enables LED support for the handheld
330 This option enables support for NXP pca9532
349 This option enables support for the LEDs connected to GPIO
360 This option enables support for LEDs connected to the National
364 To compile this driver as a module, choose M here: the
374 This option enables support for LEDs connected to the Texas
377 To compile this driver as a module, choose M here: the
388 To compile this driver as a module, choose M here: the
400 This option supports common operations for LP5521/5523/55231/5562/8501
451 This option enables support for the Keyboard LEDs on the LP8788 PMIC.
460 This option enables support for the display cluster LEDs
469 This driver makes the mail LED accessible from userspace
470 programs through the LEDs subsystem. This LED has three
474 or through /sys/class/leds/clevo::mail/brightness. As this LED
479 This module can drive the mail LED for the following notebooks:
492 To compile this driver as a module, choose M here: the
500 This option enables support for LEDs connected to PCA955x
520 This option enables support for LEDs connected to the PCA963x
529 This option enables support for LEDs connected to PCA995x
538 This option enables support for the status LEDs of the WM831x
546 This option enables support for LEDs driven by the Wolfson
554 This option enables support for on-chip LED drivers found
562 This option enables support for on-chip LED drivers found
570 This option enables support for DAC124S085 SPI DAC from NatSemi,
578 This option enables support for pwm driven LEDs
585 This option enables support for regulator driven LEDs.
593 This option enables support for BD2606MVV LED driver chips
598 To compile this driver as a module, choose M here: the module will
606 This option enables support for BD2802GU RGB LED driver chips
615 This option enables support for the Intel SS4200 series of
617 drive or power LEDs on the front panel. Using this driver
625 This option enables support for LEDs driven by a Linear Technology
626 LT3593 controller. This controller uses a special one-wire pulse
634 This option enables support for on-chip LED drivers found
637 To compile this driver as a module, choose M here: the module will
645 This option enables support for on-chip LED drivers found
654 This option enables support for the dual-GPIO LEDs found on the
669 This option enables support for LEDs found on the LaCie 2Big
677 This option enables support for LEDs connected to TC6507
686 This option enables support for Texas Instruments TLC59108
699 This option enables support for on-chip LED drivers on
707 This option enables support for LEDs connected to LM3554
714 This option enables support for the LEDs on the Bachmann OT200.
723 This driver can also be built as a module. If so the module
731 This option enables support for LEDs connected to ISSI IS31FL319x
735 This driver can also be built as a module. If so the module will be
754 This driver can also be built as a module. If so the module will be
764 This option enables support for the BlinkM RGB LED connected
773 This option enables support for the system LEDs present on
774 PowerNV platforms. Say 'y' to enable this support in kernel.
775 To compile this driver as a module, choose 'm' here: the module
784 This option enables support for the LEDs on syscon type
785 devices. This will only work with device tree enabled
793 Choose this option if you want to use the LED drivers in
801 This option enables support for the LEDs on the Mellanox
808 This option enables support for the LEDs on the Mellanox Ethernet and
810 device add call. Say Y to enable these. To compile this driver as a
817 This option enables support for userspace LEDs. Say 'y' to enable this
818 support in kernel. To compile this driver as a module, choose 'm' here:
826 This option enables support for the User1 and User2 LEDs on NI
829 To compile this driver as a module, choose M here: the module
838 This option enables support for LED controller which use a single byte
847 This supports common features between the TI LM3532, LM3631, LM3632,
856 This supports the LED device LM3697.
864 This supports the LED device LM36274.
872 This driver supports TPS61050/TPS61052 LED chips.
881 This option enables support for the Red and White LEDs of
884 To compile this driver as a module, choose M here: the module
891 This option enables support for the Power Button LED of