118 	dd_dev_info(dd, "UC base1: %p for %x\n", dd->kregbase1, RCV_ARRAY);  in hfi1_pcie_ddinit()
128 	dd_dev_info(dd, "RcvArray count: %u\n", rcv_array_count);  in hfi1_pcie_ddinit()
138 	dd_dev_info(dd, "UC base2: %p for %x\n", dd->kregbase2,  in hfi1_pcie_ddinit()
146 	dd_dev_info(dd, "WC piobase: %p for %x\n", dd->piobase, TXE_PIO_SIZE);  in hfi1_pcie_ddinit()
160 	dd_dev_info(dd, "WC RcvArray: %p for %x\n",  in hfi1_pcie_ddinit()
262 		dd_dev_info(dd,  in pcie_speeds()
274 		dd_dev_info(dd, "Parent PCIe bridge does not support Gen3\n");  in pcie_speeds()
281 	dd_dev_info(dd, "%s\n", dd->lbus_info);  in pcie_speeds()
430 		dd_dev_info(dd, "Enabling PCIe extended tags\n");  in tune_pcie_caps()
435 			dd_dev_info(dd, "Unable to write to PCI config\n");  in tune_pcie_caps()
444 		dd_dev_info(dd, "Parent not found\n");  in tune_pcie_caps()
448 		dd_dev_info(dd, "Parent not root\n");  in tune_pcie_caps()
452 		dd_dev_info(dd, "Parent is not PCI Express capable\n");  in tune_pcie_caps()
456 		dd_dev_info(dd, "PCI device is not PCI Express capable\n");  in tune_pcie_caps()
520 		dd_dev_info(dd, "State Normal, ignoring\n");  in pci_error_detected()
524 		dd_dev_info(dd, "State Frozen, requesting reset\n");  in pci_error_detected()
531 			dd_dev_info(dd, "State Permanent Failure, disabling\n");  in pci_error_detected()
541 		dd_dev_info(dd, "HFI1 PCI errors detected (state %d)\n",  in pci_error_detected()
559 		dd_dev_info(dd,  in pci_mmio_enabled()
571 	dd_dev_info(dd, "HFI1 slot_reset function called, ignored\n");  in pci_slot_reset()
580 	dd_dev_info(dd, "HFI1 resume function called\n");  in pci_resume()
976 		dd_dev_info(dd, "%s: Skipping PCIe transition\n", __func__);  in do_pcie_gen3_transition()
982 		dd_dev_info(dd, "%s: PCIe already at gen%d, %s\n", __func__,  in do_pcie_gen3_transition()
994 		dd_dev_info(dd, "%s: No upstream, Can't do gen3 transition\n",  in do_pcie_gen3_transition()
1029 		dd_dev_info(dd, "%s: Disabled therm polling\n",  in do_pcie_gen3_transition()
1038 	dd_dev_info(dd, "%s: downloading firmware\n", __func__);  in do_pcie_gen3_transition()
1047 	dd_dev_info(dd, "%s: setting PCIe registers\n", __func__);  in do_pcie_gen3_transition()
1130 	dd_dev_info(dd, "%s: using EQ Pset %u\n", __func__, pset);  in do_pcie_gen3_transition()
1140 	dd_dev_info(dd, "%s: doing pcie post steps\n", __func__);  in do_pcie_gen3_transition()
1184 	dd_dev_info(dd, "%s: clearing ASPM\n", __func__);  in do_pcie_gen3_transition()
1203 	dd_dev_info(dd, "%s: setting parent target link speed\n", __func__);  in do_pcie_gen3_transition()
1211 	dd_dev_info(dd, "%s: ..old link control2: 0x%x\n", __func__,  in do_pcie_gen3_transition()
1217 		dd_dev_info(dd, "%s: ..new link control2: 0x%x\n", __func__,  in do_pcie_gen3_transition()
1227 		dd_dev_info(dd, "%s: ..target speed is OK\n", __func__);  in do_pcie_gen3_transition()
1230 	dd_dev_info(dd, "%s: setting target link speed\n", __func__);  in do_pcie_gen3_transition()
1238 	dd_dev_info(dd, "%s: ..old link control2: 0x%x\n", __func__,  in do_pcie_gen3_transition()
1242 	dd_dev_info(dd, "%s: ..new link control2: 0x%x\n", __func__,  in do_pcie_gen3_transition()
1258 	dd_dev_info(dd, "%s: arming gasket logic\n", __func__);  in do_pcie_gen3_transition()
1274 	dd_dev_info(dd, "%s: calling trigger_sbr\n", __func__);  in do_pcie_gen3_transition()
1284 		dd_dev_info(dd,  in do_pcie_gen3_transition()
1291 		dd_dev_info(dd, "%s: VendorID is all 1s after SBR\n", __func__);  in do_pcie_gen3_transition()
1298 	dd_dev_info(dd, "%s: calling restore_pci_variables\n", __func__);  in do_pcie_gen3_transition()
1321 	dd_dev_info(dd, "%s: gasket block status: 0x%llx\n", __func__, reg);  in do_pcie_gen3_transition()
1343 	dd_dev_info(dd, "%s: per-lane errors: 0x%x\n", __func__, reg32);  in do_pcie_gen3_transition()
1367 	dd_dev_info(dd, "%s: new speed and width: %s\n", __func__,  in do_pcie_gen3_transition()
1388 		dd_dev_info(dd, "%s: Re-enable therm polling\n",  in do_pcie_gen3_transition()
1399 	dd_dev_info(dd, "%s: done\n", __func__);  in do_pcie_gen3_transition()