Lines Matching defs:ft260_get_system_status_report
145 struct ft260_get_system_status_report { struct
146 u8 report; /* FT260_SYSTEM_SETTINGS */
147 u8 chip_mode; /* DCNF0 and DCNF1 status, bits 0-1 */
148 u8 clock_ctl; /* 0 - 12MHz, 1 - 24MHz, 2 - 48MHz */
149 u8 suspend_status; /* 0 - not suspended, 1 - suspended */
150 u8 pwren_status; /* 0 - FT260 is not ready, 1 - ready */
151 u8 i2c_enable; /* 0 - disabled, 1 - enabled */
152 u8 uart_mode; /* 0 - OFF; 1 - RTS_CTS, 2 - DTR_DSR, */
154 u8 hid_over_i2c_en; /* 0 - disabled, 1 - enabled */
155 u8 gpio2_function; /* 0 - GPIO, 1 - SUSPOUT, */
157 u8 gpioA_function; /* 0 - GPIO, 3 - TX_ACTIVE, 4 - TX_LED */
158 u8 gpioG_function; /* 0 - GPIO, 2 - PWREN, */
160 u8 suspend_out_pol; /* 0 - active-high, 1 - active-low */
161 u8 enable_wakeup_int; /* 0 - disabled, 1 - enabled */
162 u8 intr_cond; /* Interrupt trigger conditions */
163 u8 power_saving_en; /* 0 - disabled, 1 - enabled */
164 u8 reserved[10];