Lines Matching +full:asahi +full:- +full:kasei
1 // SPDX-License-Identifier: GPL-2.0
3 * Device Tree Source for the R-Car Gen3 ULCB board
9 #include <dt-bindings/gpio/gpio.h>
10 #include <dt-bindings/input/input.h>
13 model = "Renesas R-Car Gen3 ULCB board";
32 stdout-path = "serial0:115200n8";
35 audio_clkout: audio-clkout {
38 * but needed to avoid cs2000/rcar_sound probe dead-lock
40 compatible = "fixed-clock";
41 #clock-cells = <0>;
42 clock-frequency = <12288000>;
45 hdmi0-out {
46 compatible = "hdmi-connector";
51 remote-endpoint = <&rcar_dw_hdmi0_out>;
57 compatible = "gpio-keys";
59 key-1 {
62 wakeup-source;
63 debounce-interval = <20>;
69 compatible = "gpio-leds";
79 reg_1p8v: regulator-1p8v {
80 compatible = "regulator-fixed";
81 regulator-name = "fixed-1.8V";
82 regulator-min-microvolt = <1800000>;
83 regulator-max-microvolt = <1800000>;
84 regulator-boot-on;
85 regulator-always-on;
88 reg_3p3v: regulator-3p3v {
89 compatible = "regulator-fixed";
90 regulator-name = "fixed-3.3V";
91 regulator-min-microvolt = <3300000>;
92 regulator-max-microvolt = <3300000>;
93 regulator-boot-on;
94 regulator-always-on;
97 vcc_sdhi0: regulator-vcc-sdhi0 {
98 compatible = "regulator-fixed";
100 regulator-name = "SDHI0 Vcc";
101 regulator-min-microvolt = <3300000>;
102 regulator-max-microvolt = <3300000>;
105 enable-active-high;
108 vccq_sdhi0: regulator-vccq-sdhi0 {
109 compatible = "regulator-gpio";
111 regulator-name = "SDHI0 VccQ";
112 regulator-min-microvolt = <1800000>;
113 regulator-max-microvolt = <3300000>;
116 gpios-states = <1>;
121 compatible = "fixed-clock";
122 #clock-cells = <0>;
123 clock-frequency = <24576000>;
126 x23_clk: x23-clock {
127 compatible = "fixed-clock";
128 #clock-cells = <0>;
129 clock-frequency = <25000000>;
134 cpu-supply = <&dvfs>;
138 clock-frequency = <22579200>;
142 pinctrl-0 = <&avb_pins>;
143 pinctrl-names = "default";
144 phy-handle = <&phy0>;
145 tx-internal-delay-ps = <2000>;
148 phy0: ethernet-phy@0 {
149 compatible = "ethernet-phy-id0022.1622",
150 "ethernet-phy-ieee802.3-c22";
151 rxc-skew-ps = <1500>;
153 interrupt-parent = <&gpio2>;
155 reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
168 clock-frequency = <16666666>;
172 clock-frequency = <32768>;
182 remote-endpoint = <&hdmi0_con>;
192 pinctrl-0 = <&i2c2_pins>;
193 pinctrl-names = "default";
197 clock-frequency = <100000>;
200 compatible = "asahi-kasei,ak4613";
204 asahi-kasei,in1-single-end;
205 asahi-kasei,in2-single-end;
206 asahi-kasei,out1-single-end;
207 asahi-kasei,out2-single-end;
208 asahi-kasei,out3-single-end;
209 asahi-kasei,out4-single-end;
210 asahi-kasei,out5-single-end;
211 asahi-kasei,out6-single-end;
214 cs2000: clk-multiplier@4f {
215 #clock-cells = <0>;
216 compatible = "cirrus,cs2000-cp";
219 clock-names = "clk_in", "ref_clk";
221 assigned-clocks = <&cs2000>;
222 assigned-clock-rates = <24576000>; /* 1/1 divide */
229 clock-frequency = <400000>;
231 versaclock5: clock-generator@6a {
234 #clock-cells = <1>;
236 clock-names = "xin";
243 clock-frequency = <400000>;
246 pinctrl-0 = <&irq0_pins>;
247 pinctrl-names = "default";
251 interrupt-parent = <&intc_ex>;
253 interrupt-controller;
254 #interrupt-cells = <2>;
255 gpio-controller;
256 #gpio-cells = <2>;
257 rohm,ddr-backup-power = <0xf>;
258 rohm,rstbmode-pulse;
262 regulator-name = "dvfs";
263 regulator-min-microvolt = <750000>;
264 regulator-max-microvolt = <1030000>;
265 regulator-boot-on;
266 regulator-always-on;
283 pinctrl-0 = <&scif_clk_pins>;
284 pinctrl-names = "default";
294 drive-strength = <24>;
300 drive-strength = <12>;
327 power-source = <3300>;
333 power-source = <1800>;
339 power-source = <1800>;
347 sound_clk_pins: sound-clk {
360 pinctrl-0 = <&sound_pins>, <&sound_clk_pins>;
361 pinctrl-names = "default";
364 #clock-cells = <1>;
365 clock-frequency = <12288000 11289600>;
393 compatible = "cypress,hyperflash", "cfi-flash";
397 compatible = "fixed-partitions";
398 #address-cells = <1>;
399 #size-cells = <1>;
403 read-only;
407 read-only;
411 read-only;
415 read-only;
419 read-only;
423 read-only;
439 timeout-sec = <60>;
444 pinctrl-0 = <&scif2_pins>;
445 pinctrl-names = "default";
451 clock-frequency = <14745600>;
455 pinctrl-0 = <&sdhi0_pins>;
456 pinctrl-1 = <&sdhi0_pins_uhs>;
457 pinctrl-names = "default", "state_uhs";
459 vmmc-supply = <&vcc_sdhi0>;
460 vqmmc-supply = <&vccq_sdhi0>;
461 cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
462 bus-width = <4>;
463 sd-uhs-sdr50;
464 sd-uhs-sdr104;
469 /* used for on-board 8bit eMMC */
470 pinctrl-0 = <&sdhi2_pins>;
471 pinctrl-1 = <&sdhi2_pins>;
472 pinctrl-names = "default", "state_uhs";
474 vmmc-supply = <®_3p3v>;
475 vqmmc-supply = <®_1p8v>;
476 bus-width = <8>;
477 mmc-hs200-1_8v;
478 mmc-hs400-1_8v;
479 no-sd;
480 no-sdio;
481 non-removable;
482 full-pwr-cycle-in-suspend;
487 shared-pin;
491 pinctrl-0 = <&usb1_pins>;
492 pinctrl-names = "default";
499 * For sound-test.
503 * #include "ulcb-simple-audio-card.dtsi"
504 * #include "ulcb-simple-audio-card-mix+split.dtsi"
505 * #include "ulcb-audio-graph-card.dtsi"
506 * #include "ulcb-audio-graph-card-mix+split.dtsi"
507 * #include "ulcb-audio-graph-card2-mix+split.dtsi"
509 #include "ulcb-audio-graph-card2.dtsi"