Lines Matching +full:full +full:- +full:ohms
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 /dts-v1/;
8 #include <dt-bindings/gpio/gpio.h>
9 #include <dt-bindings/input/linux-event-codes.h>
10 #include <dt-bindings/leds/common.h>
11 #include <dt-bindings/phy/phy-imx8-pcie.h>
17 compatible = "gw,imx8mm-gw7901", "fsl,imx8mm";
30 stdout-path = &uart2;
38 gpio-keys {
39 compatible = "gpio-keys";
41 key-user-pb {
47 key-user-pb1x {
50 interrupt-parent = <&gsc>;
54 key-erased {
57 interrupt-parent = <&gsc>;
61 key-eeprom-wp {
64 interrupt-parent = <&gsc>;
68 key-tamper {
71 interrupt-parent = <&gsc>;
75 switch-hold {
78 interrupt-parent = <&gsc>;
83 led-controller {
84 compatible = "gpio-leds";
86 led-0 {
91 default-state = "off";
94 led-1 {
99 default-state = "off";
102 led-2 {
107 default-state = "off";
110 led-3 {
115 default-state = "off";
118 led-4 {
123 default-state = "off";
126 led-5 {
131 default-state = "off";
134 led-6 {
139 default-state = "off";
142 led-7 {
147 default-state = "off";
150 led-8 {
155 default-state = "off";
158 led-9 {
163 default-state = "off";
166 led-a {
171 default-state = "off";
174 led-b {
179 default-state = "off";
183 pcie0_refclk: pcie0-refclk {
184 compatible = "fixed-clock";
185 #clock-cells = <0>;
186 clock-frequency = <100000000>;
189 reg_3p3v: regulator-3p3v {
190 compatible = "regulator-fixed";
191 regulator-name = "3P3V";
192 regulator-min-microvolt = <3300000>;
193 regulator-max-microvolt = <3300000>;
196 regulator-ioexp {
197 pinctrl-names = "default";
198 pinctrl-0 = <&pinctrl_reg_ioexp>;
199 compatible = "regulator-fixed";
200 regulator-name = "ioexp";
202 enable-active-high;
203 startup-delay-us = <100>;
204 regulator-min-microvolt = <3300000>;
205 regulator-max-microvolt = <3300000>;
206 regulator-always-on;
209 regulator-isouart {
210 pinctrl-names = "default";
211 pinctrl-0 = <&pinctrl_reg_isouart>;
212 compatible = "regulator-fixed";
213 regulator-name = "iso_uart";
215 startup-delay-us = <100>;
216 regulator-min-microvolt = <3300000>;
217 regulator-max-microvolt = <3300000>;
218 regulator-always-on;
221 reg_usb2_vbus: regulator-usb2 {
222 pinctrl-names = "default";
223 pinctrl-0 = <&pinctrl_reg_usb2>;
224 compatible = "regulator-fixed";
225 regulator-name = "usb_usb2_vbus";
227 enable-active-high;
228 regulator-min-microvolt = <5000000>;
229 regulator-max-microvolt = <5000000>;
232 reg_wifi: regulator-wifi {
233 pinctrl-names = "default";
234 pinctrl-0 = <&pinctrl_reg_wl>;
235 compatible = "regulator-fixed";
236 regulator-name = "wifi";
238 enable-active-high;
239 startup-delay-us = <100>;
240 regulator-min-microvolt = <3300000>;
241 regulator-max-microvolt = <3300000>;
246 cpu-supply = <&buck2>;
250 cpu-supply = <&buck2>;
254 cpu-supply = <&buck2>;
258 cpu-supply = <&buck2>;
262 operating-points-v2 = <&ddrc_opp_table>;
264 ddrc_opp_table: opp-table {
265 compatible = "operating-points-v2";
267 opp-25000000 {
268 opp-hz = /bits/ 64 <25000000>;
271 opp-100000000 {
272 opp-hz = /bits/ 64 <100000000>;
275 opp-750000000 {
276 opp-hz = /bits/ 64 <750000000>;
286 pinctrl-names = "default";
287 pinctrl-0 = <&pinctrl_spi1>;
288 cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
292 compatible = "jedec,spi-nor";
294 spi-max-frequency = <40000000>;
300 pinctrl-names = "default";
301 pinctrl-0 = <&pinctrl_fec1>;
302 phy-mode = "rgmii-id";
303 local-mac-address = [00 00 00 00 00 00];
306 fixed-link {
308 full-duplex;
313 gpio-line-names = "uart1_rs422#", "", "", "uart1_rs485#",
321 gpio-line-names = "", "", "", "",
329 gpio-line-names = "", "", "", "dig2_out", "dig2_in", "sim2sel", "", "",
344 clock-frequency = <100000>;
345 pinctrl-names = "default", "gpio";
346 pinctrl-0 = <&pinctrl_i2c1>;
347 pinctrl-1 = <&pinctrl_i2c1_gpio>;
348 scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
349 sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
355 pinctrl-0 = <&pinctrl_gsc>;
356 interrupt-parent = <&gpio4>;
358 interrupt-controller;
359 #interrupt-cells = <1>;
362 compatible = "gw,gsc-adc";
363 #address-cells = <1>;
364 #size-cells = <0>;
382 gw,voltage-divider-ohms = <22100 1000>;
389 gw,voltage-divider-ohms = <22100 1000>;
396 gw,voltage-divider-ohms = <22100 1000>;
403 gw,voltage-divider-ohms = <10000 10000>;
410 gw,voltage-divider-ohms = <10000 10000>;
453 gw,voltage-divider-ohms = <10000 10000>;
461 gpio-controller;
462 #gpio-cells = <2>;
463 interrupt-parent = <&gsc>;
498 clock-frequency = <400000>;
499 pinctrl-names = "default", "gpio";
500 pinctrl-0 = <&pinctrl_i2c2>;
501 pinctrl-1 = <&pinctrl_i2c2_gpio>;
502 scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
503 sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
509 pinctrl-names = "default";
510 pinctrl-0 = <&pinctrl_pmic>;
511 interrupt-parent = <&gpio3>;
513 rohm,reset-snvs-powered;
514 #clock-cells = <0>;
516 clock-output-names = "clk-32k-out";
519 /* vdd_soc: 0.805-0.900V (typ=0.8V) */
521 regulator-name = "buck1";
522 regulator-min-microvolt = <700000>;
523 regulator-max-microvolt = <1300000>;
524 regulator-boot-on;
525 regulator-always-on;
526 regulator-ramp-delay = <1250>;
529 /* vdd_arm: 0.805-1.0V (typ=0.9V) */
531 regulator-name = "buck2";
532 regulator-min-microvolt = <700000>;
533 regulator-max-microvolt = <1300000>;
534 regulator-boot-on;
535 regulator-always-on;
536 regulator-ramp-delay = <1250>;
537 rohm,dvs-run-voltage = <1000000>;
538 rohm,dvs-idle-voltage = <900000>;
541 /* vdd_0p9: 0.805-1.0V (typ=0.9V) */
543 regulator-name = "buck3";
544 regulator-min-microvolt = <700000>;
545 regulator-max-microvolt = <1350000>;
546 regulator-boot-on;
547 regulator-always-on;
552 regulator-name = "buck4";
553 regulator-min-microvolt = <3000000>;
554 regulator-max-microvolt = <3300000>;
555 regulator-boot-on;
556 regulator-always-on;
561 regulator-name = "buck5";
562 regulator-min-microvolt = <1605000>;
563 regulator-max-microvolt = <1995000>;
564 regulator-boot-on;
565 regulator-always-on;
570 regulator-name = "buck6";
571 regulator-min-microvolt = <800000>;
572 regulator-max-microvolt = <1400000>;
573 regulator-boot-on;
574 regulator-always-on;
579 regulator-name = "ldo1";
580 regulator-min-microvolt = <1600000>;
581 regulator-max-microvolt = <1900000>;
582 regulator-boot-on;
583 regulator-always-on;
588 regulator-name = "ldo2";
589 regulator-min-microvolt = <800000>;
590 regulator-max-microvolt = <900000>;
591 regulator-boot-on;
592 regulator-always-on;
597 regulator-name = "ldo3";
598 regulator-min-microvolt = <1800000>;
599 regulator-max-microvolt = <3300000>;
600 regulator-boot-on;
601 regulator-always-on;
605 regulator-name = "ldo4";
606 regulator-min-microvolt = <900000>;
607 regulator-max-microvolt = <1800000>;
608 regulator-boot-on;
609 regulator-always-on;
613 regulator-name = "ldo6";
614 regulator-min-microvolt = <900000>;
615 regulator-max-microvolt = <1800000>;
616 regulator-boot-on;
617 regulator-always-on;
624 clock-frequency = <400000>;
625 pinctrl-names = "default", "gpio";
626 pinctrl-0 = <&pinctrl_i2c3>;
627 pinctrl-1 = <&pinctrl_i2c3_gpio>;
628 scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
629 sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
635 gpio-controller;
636 #gpio-cells = <2>;
642 pinctrl-0 = <&pinctrl_ksz>;
643 interrupt-parent = <&gpio4>;
645 phy-mode = "rgmii-id";
648 #address-cells = <1>;
649 #size-cells = <0>;
654 phy-mode = "internal";
655 local-mac-address = [00 00 00 00 00 00];
661 phy-mode = "internal";
662 local-mac-address = [00 00 00 00 00 00];
668 phy-mode = "internal";
669 local-mac-address = [00 00 00 00 00 00];
675 phy-mode = "internal";
676 local-mac-address = [00 00 00 00 00 00];
683 phy-mode = "rgmii-id";
685 fixed-link {
687 full-duplex;
700 clock-frequency = <400000>;
701 pinctrl-names = "default", "gpio";
702 pinctrl-0 = <&pinctrl_i2c4>;
703 pinctrl-1 = <&pinctrl_i2c4_gpio>;
704 scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
705 sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
710 fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
711 fsl,clkreq-unsupported;
713 clock-names = "ref";
718 pinctrl-names = "default";
719 pinctrl-0 = <&pinctrl_pcie0>;
720 reset-gpio = <&gpio5 2 GPIO_ACTIVE_LOW>;
723 assigned-clocks = <&clk IMX8MM_CLK_PCIE1_AUX>,
725 assigned-clock-rates = <10000000>, <250000000>;
726 assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_50M>,
744 pinctrl-names = "default";
745 pinctrl-0 = <&pinctrl_uart1>, <&pinctrl_uart1_gpio>;
746 rts-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
747 cts-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
748 dtr-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
749 dsr-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
750 dcd-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
756 pinctrl-names = "default";
757 pinctrl-0 = <&pinctrl_uart2>;
762 pinctrl-names = "default";
763 pinctrl-0 = <&pinctrl_uart3>, <&pinctrl_uart3_gpio>;
764 cts-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
765 rts-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
770 pinctrl-names = "default";
771 pinctrl-0 = <&pinctrl_uart4>, <&pinctrl_uart4_gpio>;
772 cts-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
773 rts-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
779 disable-over-current;
785 vbus-supply = <®_usb2_vbus>;
786 over-current-active-low;
792 pinctrl-names = "default", "state_100mhz", "state_200mhz";
793 pinctrl-0 = <&pinctrl_usdhc1>;
794 pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
795 pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
796 bus-width = <4>;
797 non-removable;
798 vmmc-supply = <®_wifi>;
799 #address-cells = <1>;
800 #size-cells = <0>;
804 compatible = "brcm,bcm43455-fmac", "brcm,bcm4329-fmac";
811 pinctrl-names = "default", "state_100mhz", "state_200mhz";
812 pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
813 pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
814 pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
815 cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
816 bus-width = <4>;
817 vmmc-supply = <®_3p3v>;
823 pinctrl-names = "default", "state_100mhz", "state_200mhz";
824 pinctrl-0 = <&pinctrl_usdhc3>;
825 pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
826 pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
827 bus-width = <8>;
828 non-removable;
833 pinctrl-names = "default";
834 pinctrl-0 = <&pinctrl_wdog>;
835 fsl,ext-reset-output;
840 pinctrl-names = "default";
841 pinctrl-0 = <&pinctrl_hog>;
1066 pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
1077 pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
1099 pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
1110 pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
1121 pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
1144 pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
1160 pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {