Lines Matching +full:regulator +full:- +full:max +full:- +full:microamp
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
6 #include <dt-bindings/gpio/gpio.h>
7 #include <dt-bindings/input/linux-event-codes.h>
8 #include <dt-bindings/net/ti-dp83867.h>
16 gpio-keys {
17 compatible = "gpio-keys";
19 key-user-pb {
25 key-user-pb1x {
28 interrupt-parent = <&gsc>;
32 key-erased {
35 interrupt-parent = <&gsc>;
39 key-eeprom-wp {
42 interrupt-parent = <&gsc>;
46 key-tamper {
49 interrupt-parent = <&gsc>;
53 switch-hold {
56 interrupt-parent = <&gsc>;
63 cpu-supply = <&buck3_reg>;
67 cpu-supply = <&buck3_reg>;
71 cpu-supply = <&buck3_reg>;
75 cpu-supply = <&buck3_reg>;
79 operating-points-v2 = <&ddrc_opp_table>;
81 ddrc_opp_table: opp-table {
82 compatible = "operating-points-v2";
84 opp-25000000 {
85 opp-hz = /bits/ 64 <25000000>;
88 opp-100000000 {
89 opp-hz = /bits/ 64 <100000000>;
92 opp-750000000 {
93 opp-hz = /bits/ 64 <750000000>;
99 pinctrl-names = "default";
100 pinctrl-0 = <&pinctrl_fec1>;
101 phy-mode = "rgmii-id";
102 phy-handle = <ðphy0>;
106 #address-cells = <1>;
107 #size-cells = <0>;
109 ethphy0: ethernet-phy@0 {
110 compatible = "ethernet-phy-ieee802.3-c22";
112 ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
113 ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
114 tx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
115 rx-fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
121 clock-frequency = <100000>;
122 pinctrl-names = "default", "gpio";
123 pinctrl-0 = <&pinctrl_i2c1>;
124 pinctrl-1 = <&pinctrl_i2c1_gpio>;
125 scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
126 sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
132 pinctrl-0 = <&pinctrl_gsc>;
133 interrupt-parent = <&gpio2>;
135 interrupt-controller;
136 #interrupt-cells = <1>;
137 #address-cells = <1>;
138 #size-cells = <0>;
141 compatible = "gw,gsc-adc";
142 #address-cells = <1>;
143 #size-cells = <0>;
167 gw,voltage-divider-ohms = <22100 1000>;
174 gw,voltage-divider-ohms = <10000 10000>;
181 gw,voltage-divider-ohms = <10000 10000>;
206 gw,voltage-divider-ohms = <10000 10000>;
213 gw,voltage-divider-ohms = <10000 10000>;
232 gw,voltage-divider-ohms = <10000 10000>;
236 fan-controller@0 {
237 compatible = "gw,gsc-fan";
245 gpio-controller;
246 #gpio-cells = <2>;
247 interrupt-parent = <&gsc>;
287 regulator-name = "buck1";
288 regulator-min-microvolt = <800000>;
289 regulator-max-microvolt = <1000000>;
290 regulator-min-microamp = <3800000>;
291 regulator-max-microamp = <6800000>;
292 regulator-boot-on;
293 regulator-always-on;
298 regulator-name = "buck2";
299 regulator-min-microvolt = <800000>;
300 regulator-max-microvolt = <900000>;
301 regulator-min-microamp = <2200000>;
302 regulator-max-microamp = <5200000>;
303 regulator-boot-on;
304 regulator-always-on;
309 regulator-name = "buck3";
310 regulator-min-microvolt = <800000>;
311 regulator-max-microvolt = <1000000>;
312 regulator-min-microamp = <3800000>;
313 regulator-max-microamp = <6800000>;
314 regulator-always-on;
319 regulator-name = "buck4";
320 regulator-min-microvolt = <1800000>;
321 regulator-max-microvolt = <1800000>;
322 regulator-min-microamp = <2200000>;
323 regulator-max-microamp = <5200000>;
324 regulator-boot-on;
325 regulator-always-on;
330 regulator-name = "ldo1";
331 regulator-min-microvolt = <1800000>;
332 regulator-max-microvolt = <1800000>;
333 regulator-boot-on;
334 regulator-always-on;
339 regulator-name = "ldo2";
340 regulator-min-microvolt = <800000>;
341 regulator-max-microvolt = <800000>;
342 regulator-boot-on;
343 regulator-always-on;
348 regulator-name = "ldo3";
349 regulator-min-microvolt = <900000>;
350 regulator-max-microvolt = <900000>;
351 regulator-boot-on;
352 regulator-always-on;
357 regulator-name = "ldo4";
358 regulator-min-microvolt = <1800000>;
359 regulator-max-microvolt = <1800000>;
360 regulator-boot-on;
361 regulator-always-on;
368 clock-frequency = <400000>;
369 pinctrl-names = "default", "gpio";
370 pinctrl-0 = <&pinctrl_i2c2>;
371 pinctrl-1 = <&pinctrl_i2c2_gpio>;
372 scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
373 sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
385 pinctrl-names = "default";
386 pinctrl-0 = <&pinctrl_uart2>;
392 pinctrl-names = "default", "state_100mhz", "state_200mhz";
393 pinctrl-0 = <&pinctrl_usdhc3>;
394 pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
395 pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
396 bus-width = <8>;
397 non-removable;
402 pinctrl-names = "default";
403 pinctrl-0 = <&pinctrl_wdog>;
404 fsl,ext-reset-output;
486 pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
502 pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {