Lines Matching +full:sdcard +full:- +full:pins
1 // SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
6 * DHCM-iMX6ULL-C080-R051-F0409-SPI-E2-CAN2-SD-RTC-ADC-I-01D2
7 * DHCOR PCB number: 578-200 or newer
8 * DHCOM PCB number: 579-200 or newer
9 * PicoITX PCB number: 487-600 or newer
11 /dts-v1/;
13 #include "imx6ull-dhcom-som.dtsi"
14 #include "imx6ull-dhcom-som-cfg-sdcard.dtsi"
18 compatible = "dh,imx6ull-dhcom-picoitx", "dh,imx6ull-dhcom-som",
19 "dh,imx6ull-dhcor-som", "fsl,imx6ull";
22 compatible = "gpio-leds";
24 led-0 {
26 default-state = "off";
34 phy-handle = <&mdio1_phy0>;
37 #address-cells = <1>;
38 #size-cells = <0>;
40 mdio1_phy0: ethernet-phy@0 {
41 compatible = "ethernet-phy-id0007.c0f0", /* SMSC LAN8710Ai */
42 "ethernet-phy-ieee802.3-c22";
44 clock-names = "rmii-ref";
46 interrupt-parent = <&gpio5>;
48 pinctrl-0 = <&pinctrl_fec1_phy &pinctrl_snvs_fec1_phy>;
49 pinctrl-names = "default";
50 reset-assert-us = <500>;
51 reset-deassert-us = <500>;
52 reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
53 smsc,disable-energy-detect; /* Make plugin detection reliable */
63 gpio-line-names =
68 "", "PicoITX-HW2", "PicoITX-HW1", "DHCOM-M",
69 "PicoITX-HW0", "DHCOM-U", "DHCOM-T", "DHCOM-S",
70 "DHCOM-R", "DHCOM-Q", "DHCOM-P", "DHCOM-O",
71 "DHCOM-N", "", "", "";
75 gpio-line-names =
76 "DHCOM-A", "DHCOM-B", "PicoITX-In2", "PicoITX-Out2",
77 "PicoITX-In1", "", "", "PicoITX-Out1",
78 "DHCOM-G", "DHCOM-H", "", "",
87 pinctrl_fec1: fec1-grp {
88 fsl,pins = <