Lines Matching +full:lpc +full:- +full:io +full:- +full:reg
1 // SPDX-License-Identifier: GPL-2.0-or-later
4 #include <dt-bindings/interrupt-controller/arm-gic.h>
5 #include <dt-bindings/interrupt-controller/aspeed-scu-ic.h>
6 #include <dt-bindings/clock/ast2600-clock.h>
11 #address-cells = <1>;
12 #size-cells = <1>;
13 interrupt-parent = <&gic>;
47 #address-cells = <1>;
48 #size-cells = <0>;
49 enable-method = "aspeed,ast2600-smp";
52 compatible = "arm,cortex-a7";
54 reg = <0xf00>;
58 compatible = "arm,cortex-a7";
60 reg = <0xf01>;
65 compatible = "arm,armv7-timer";
66 interrupt-parent = <&gic>;
72 arm,cpu-registers-not-fw-configured;
73 always-on;
77 compatible = "aspeed,ast2600-sdram-edac", "syscon";
78 reg = <0x1e6e0000 0x174>;
83 compatible = "simple-bus";
84 #address-cells = <1>;
85 #size-cells = <1>;
89 gic: interrupt-controller@40461000 {
90 compatible = "arm,cortex-a7-gic";
92 #interrupt-cells = <3>;
93 interrupt-controller;
94 interrupt-parent = <&gic>;
95 reg = <0x40461000 0x1000>,
102 compatible = "aspeed,ast2600-ahbc", "syscon";
103 reg = <0x1e600000 0x100>;
107 reg = <0x1e620000 0xc4>, <0x20000000 0x10000000>;
108 #address-cells = <1>;
109 #size-cells = <0>;
110 compatible = "aspeed,ast2600-fmc";
115 reg = < 0 >;
116 compatible = "jedec,spi-nor";
117 spi-max-frequency = <50000000>;
118 spi-rx-bus-width = <2>;
122 reg = < 1 >;
123 compatible = "jedec,spi-nor";
124 spi-max-frequency = <50000000>;
125 spi-rx-bus-width = <2>;
129 reg = < 2 >;
130 compatible = "jedec,spi-nor";
131 spi-max-frequency = <50000000>;
132 spi-rx-bus-width = <2>;
138 reg = <0x1e630000 0xc4>, <0x30000000 0x10000000>;
139 #address-cells = <1>;
140 #size-cells = <0>;
141 compatible = "aspeed,ast2600-spi";
145 reg = < 0 >;
146 compatible = "jedec,spi-nor";
147 spi-max-frequency = <50000000>;
148 spi-rx-bus-width = <2>;
152 reg = < 1 >;
153 compatible = "jedec,spi-nor";
154 spi-max-frequency = <50000000>;
155 spi-rx-bus-width = <2>;
161 reg = <0x1e631000 0xc4>, <0x50000000 0x10000000>;
162 #address-cells = <1>;
163 #size-cells = <0>;
164 compatible = "aspeed,ast2600-spi";
168 reg = < 0 >;
169 compatible = "jedec,spi-nor";
170 spi-max-frequency = <50000000>;
171 spi-rx-bus-width = <2>;
175 reg = < 1 >;
176 compatible = "jedec,spi-nor";
177 spi-max-frequency = <50000000>;
178 spi-rx-bus-width = <2>;
182 reg = < 2 >;
183 compatible = "jedec,spi-nor";
184 spi-max-frequency = <50000000>;
185 spi-rx-bus-width = <2>;
191 compatible = "aspeed,ast2600-mdio";
192 reg = <0x1e650000 0x8>;
193 #address-cells = <1>;
194 #size-cells = <0>;
196 pinctrl-names = "default";
197 pinctrl-0 = <&pinctrl_mdio1_default>;
202 compatible = "aspeed,ast2600-mdio";
203 reg = <0x1e650008 0x8>;
204 #address-cells = <1>;
205 #size-cells = <0>;
207 pinctrl-names = "default";
208 pinctrl-0 = <&pinctrl_mdio2_default>;
213 compatible = "aspeed,ast2600-mdio";
214 reg = <0x1e650010 0x8>;
215 #address-cells = <1>;
216 #size-cells = <0>;
218 pinctrl-names = "default";
219 pinctrl-0 = <&pinctrl_mdio3_default>;
224 compatible = "aspeed,ast2600-mdio";
225 reg = <0x1e650018 0x8>;
226 #address-cells = <1>;
227 #size-cells = <0>;
229 pinctrl-names = "default";
230 pinctrl-0 = <&pinctrl_mdio4_default>;
235 compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
236 reg = <0x1e660000 0x180>;
237 #address-cells = <1>;
238 #size-cells = <0>;
245 compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
246 reg = <0x1e680000 0x180>;
247 #address-cells = <1>;
248 #size-cells = <0>;
255 compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
256 reg = <0x1e670000 0x180>;
257 #address-cells = <1>;
258 #size-cells = <0>;
265 compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
266 reg = <0x1e690000 0x180>;
267 #address-cells = <1>;
268 #size-cells = <0>;
275 compatible = "aspeed,ast2600-ehci", "generic-ehci";
276 reg = <0x1e6a1000 0x100>;
279 pinctrl-names = "default";
280 pinctrl-0 = <&pinctrl_usb2ah_default>;
285 compatible = "aspeed,ast2600-ehci", "generic-ehci";
286 reg = <0x1e6a3000 0x100>;
289 pinctrl-names = "default";
290 pinctrl-0 = <&pinctrl_usb2bh_default>;
295 compatible = "aspeed,ast2600-uhci", "generic-uhci";
296 reg = <0x1e6b0000 0x100>;
307 vhub: usb-vhub@1e6a0000 {
308 compatible = "aspeed,ast2600-usb-vhub";
309 reg = <0x1e6a0000 0x350>;
312 aspeed,vhub-downstream-ports = <7>;
313 aspeed,vhub-generic-endpoints = <21>;
314 pinctrl-names = "default";
315 pinctrl-0 = <&pinctrl_usb2ad_default>;
320 compatible = "aspeed,ast2600-udc";
321 reg = <0x1e6a2000 0x300>;
324 pinctrl-names = "default";
325 pinctrl-0 = <&pinctrl_usb2bd_default>;
330 compatible = "simple-bus";
331 #address-cells = <1>;
332 #size-cells = <1>;
336 compatible = "aspeed,ast2600-hace";
337 reg = <0x1e6d0000 0x200>;
344 compatible = "aspeed,ast2600-scu", "syscon", "simple-mfd";
345 reg = <0x1e6e2000 0x1000>;
347 #address-cells = <1>;
348 #size-cells = <1>;
349 #clock-cells = <1>;
350 #reset-cells = <1>;
353 compatible = "aspeed,ast2600-pinctrl";
356 silicon-id@14 {
357 compatible = "aspeed,ast2600-silicon-id", "aspeed,silicon-id";
358 reg = <0x14 0x4 0x5b0 0x8>;
361 smp-memram@180 {
362 compatible = "aspeed,ast2600-smpmem";
363 reg = <0x180 0x40>;
366 scu_ic0: interrupt-controller@560 {
367 #interrupt-cells = <1>;
368 compatible = "aspeed,ast2600-scu-ic0";
369 reg = <0x560 0x4>;
371 interrupt-controller;
374 scu_ic1: interrupt-controller@570 {
375 #interrupt-cells = <1>;
376 compatible = "aspeed,ast2600-scu-ic1";
377 reg = <0x570 0x4>;
379 interrupt-controller;
385 reg = <0x1e6e2524 0x4>;
391 compatible = "aspeed,ast2600-gfx", "syscon";
392 reg = <0x1e6e6000 0x1000>;
393 reg-io-width = <4>;
402 compatible = "aspeed,ast2600-xdma";
403 reg = <0x1e6e7000 0x100>;
406 reset-names = "device", "root-complex";
407 interrupts-extended = <&gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
409 aspeed,pcie-device = "bmc";
415 compatible = "aspeed,ast2600-adc0";
416 reg = <0x1e6e9000 0x100>;
420 #io-channel-cells = <1>;
425 compatible = "aspeed,ast2600-adc1";
426 reg = <0x1e6e9100 0x100>;
430 #io-channel-cells = <1>;
434 sbc: secure-boot-controller@1e6f2000 {
435 compatible = "aspeed,ast2600-sbc";
436 reg = <0x1e6f2000 0x1000>;
440 compatible = "aspeed,ast2600-acry";
441 reg = <0x1e6fa000 0x400>, <0x1e710000 0x1800>;
448 compatible = "aspeed,ast2600-video-engine";
449 reg = <0x1e700000 0x1000>;
452 clock-names = "vclk", "eclk";
458 #gpio-cells = <2>;
459 gpio-controller;
460 compatible = "aspeed,ast2600-gpio";
461 reg = <0x1e780000 0x400>;
463 gpio-ranges = <&pinctrl 0 0 208>;
466 interrupt-controller;
467 #interrupt-cells = <2>;
471 #gpio-cells = <2>;
472 gpio-controller;
473 compatible = "aspeed,ast2600-sgpiom";
474 reg = <0x1e780500 0x100>;
477 interrupt-controller;
478 bus-frequency = <12000000>;
479 pinctrl-names = "default";
480 pinctrl-0 = <&pinctrl_sgpm1_default>;
485 #gpio-cells = <2>;
486 gpio-controller;
487 compatible = "aspeed,ast2600-sgpiom";
488 reg = <0x1e780600 0x100>;
491 interrupt-controller;
492 bus-frequency = <12000000>;
493 pinctrl-names = "default";
494 pinctrl-0 = <&pinctrl_sgpm2_default>;
499 #gpio-cells = <2>;
500 gpio-controller;
501 compatible = "aspeed,ast2600-gpio";
502 reg = <0x1e780800 0x800>;
504 gpio-ranges = <&pinctrl 0 208 36>;
507 interrupt-controller;
508 #interrupt-cells = <2>;
512 compatible = "aspeed,ast2600-rtc";
513 reg = <0x1e781000 0x18>;
519 compatible = "aspeed,ast2600-timer";
520 reg = <0x1e782000 0x90>;
521 interrupts-extended = <&gic GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
530 clock-names = "PCLK";
536 reg = <0x1e783000 0x20>;
537 reg-shift = <2>;
538 reg-io-width = <4>;
542 no-loopback-test;
543 pinctrl-names = "default";
544 pinctrl-0 = <&pinctrl_txd1_default &pinctrl_rxd1_default>;
550 reg = <0x1e784000 0x1000>;
551 reg-shift = <2>;
554 no-loopback-test;
558 compatible = "aspeed,ast2600-wdt";
559 reg = <0x1e785000 0x40>;
563 compatible = "aspeed,ast2600-wdt";
564 reg = <0x1e785040 0x40>;
569 compatible = "aspeed,ast2600-wdt";
570 reg = <0x1e785080 0x40>;
575 compatible = "aspeed,ast2600-wdt";
576 reg = <0x1e7850C0 0x40>;
580 peci0: peci-controller@1e78b000 {
581 compatible = "aspeed,ast2600-peci";
582 reg = <0x1e78b000 0x100>;
586 cmd-timeout-ms = <1000>;
587 clock-frequency = <1000000>;
591 lpc: lpc@1e789000 { label
592 compatible = "aspeed,ast2600-lpc-v2", "simple-mfd", "syscon";
593 reg = <0x1e789000 0x1000>;
594 reg-io-width = <4>;
596 #address-cells = <1>;
597 #size-cells = <1>;
601 compatible = "aspeed,ast2500-kcs-bmc-v2";
602 reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>;
610 compatible = "aspeed,ast2500-kcs-bmc-v2";
611 reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>;
618 compatible = "aspeed,ast2500-kcs-bmc-v2";
619 reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>;
626 compatible = "aspeed,ast2500-kcs-bmc-v2";
627 reg = <0x114 0x1>, <0x118 0x1>, <0x11c 0x1>;
633 lpc_ctrl: lpc-ctrl@80 {
634 compatible = "aspeed,ast2600-lpc-ctrl";
635 reg = <0x80 0x80>;
640 lpc_snoop: lpc-snoop@80 {
641 compatible = "aspeed,ast2600-lpc-snoop";
642 reg = <0x80 0x80>;
649 compatible = "aspeed,ast2600-lhc";
650 reg = <0xa0 0x24 0xc8 0x8>;
653 lpc_reset: reset-controller@98 {
654 compatible = "aspeed,ast2600-lpc-reset";
655 reg = <0x98 0x4>;
656 #reset-cells = <1>;
659 uart_routing: uart-routing@98 {
660 compatible = "aspeed,ast2600-uart-routing";
661 reg = <0x98 0x8>;
666 compatible = "aspeed,ast2600-ibt-bmc";
667 reg = <0x140 0x18>;
675 compatible = "aspeed,ast2600-sd-controller";
676 reg = <0x1e740000 0x100>;
677 #address-cells = <1>;
678 #size-cells = <1>;
684 compatible = "aspeed,ast2600-sdhci", "sdhci";
685 reg = <0x100 0x100>;
687 sdhci,auto-cmd12;
693 compatible = "aspeed,ast2600-sdhci", "sdhci";
694 reg = <0x200 0x100>;
696 sdhci,auto-cmd12;
703 compatible = "aspeed,ast2600-sd-controller";
704 reg = <0x1e750000 0x100>;
705 #address-cells = <1>;
706 #size-cells = <1>;
712 compatible = "aspeed,ast2600-sdhci";
713 reg = <0x100 0x100>;
714 sdhci,auto-cmd12;
717 pinctrl-names = "default";
718 pinctrl-0 = <&pinctrl_emmc_default>;
723 compatible = "aspeed,ast2500-vuart";
724 reg = <0x1e787000 0x40>;
725 reg-shift = <2>;
728 no-loopback-test;
733 compatible = "aspeed,ast2500-vuart";
734 reg = <0x1e787800 0x40>;
735 reg-shift = <2>;
738 no-loopback-test;
743 compatible = "aspeed,ast2500-vuart";
744 reg = <0x1e788000 0x40>;
745 reg-shift = <2>;
748 no-loopback-test;
753 compatible = "aspeed,ast2500-vuart";
754 reg = <0x1e788800 0x40>;
755 reg-shift = <2>;
758 no-loopback-test;
764 reg = <0x1e78d000 0x20>;
765 reg-shift = <2>;
766 reg-io-width = <4>;
770 no-loopback-test;
771 pinctrl-names = "default";
772 pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
778 reg = <0x1e78e000 0x20>;
779 reg-shift = <2>;
780 reg-io-width = <4>;
784 no-loopback-test;
785 pinctrl-names = "default";
786 pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>;
792 reg = <0x1e78f000 0x20>;
793 reg-shift = <2>;
794 reg-io-width = <4>;
798 no-loopback-test;
799 pinctrl-names = "default";
800 pinctrl-0 = <&pinctrl_txd4_default &pinctrl_rxd4_default>;
806 reg = <0x1e790000 0x20>;
807 reg-shift = <2>;
808 reg-io-width = <4>;
811 no-loopback-test;
812 pinctrl-names = "default";
813 pinctrl-0 = <&pinctrl_uart6_default>;
820 reg = <0x1e790100 0x20>;
821 reg-shift = <2>;
822 reg-io-width = <4>;
825 no-loopback-test;
826 pinctrl-names = "default";
827 pinctrl-0 = <&pinctrl_uart7_default>;
834 reg = <0x1e790200 0x20>;
835 reg-shift = <2>;
836 reg-io-width = <4>;
839 no-loopback-test;
840 pinctrl-names = "default";
841 pinctrl-0 = <&pinctrl_uart8_default>;
848 reg = <0x1e790300 0x20>;
849 reg-shift = <2>;
850 reg-io-width = <4>;
853 no-loopback-test;
854 pinctrl-names = "default";
855 pinctrl-0 = <&pinctrl_uart9_default>;
861 compatible = "simple-bus";
862 #address-cells = <1>;
863 #size-cells = <1>;
868 compatible = "aspeed,ast2600-fsi-master", "fsi-master";
869 reg = <0x1e79b000 0x94>;
871 pinctrl-names = "default";
872 pinctrl-0 = <&pinctrl_fsi1_default>;
878 compatible = "aspeed,ast2600-fsi-master", "fsi-master";
879 reg = <0x1e79b100 0x94>;
881 pinctrl-names = "default";
882 pinctrl-0 = <&pinctrl_fsi2_default>;
887 udma: dma-controller@1e79e000 {
888 compatible = "aspeed,ast2600-udma";
889 reg = <0x1e79e000 0x1000>;
891 dma-channels = <28>;
892 #dma-cells = <1>;
899 #include "aspeed-g6-pinctrl.dtsi"
902 i2c0: i2c-bus@80 {
903 #address-cells = <1>;
904 #size-cells = <0>;
905 #interrupt-cells = <1>;
906 reg = <0x80 0x80>;
907 compatible = "aspeed,ast2600-i2c-bus";
911 bus-frequency = <100000>;
912 pinctrl-names = "default";
913 pinctrl-0 = <&pinctrl_i2c1_default>;
917 i2c1: i2c-bus@100 {
918 #address-cells = <1>;
919 #size-cells = <0>;
920 #interrupt-cells = <1>;
921 reg = <0x100 0x80>;
922 compatible = "aspeed,ast2600-i2c-bus";
926 bus-frequency = <100000>;
927 pinctrl-names = "default";
928 pinctrl-0 = <&pinctrl_i2c2_default>;
932 i2c2: i2c-bus@180 {
933 #address-cells = <1>;
934 #size-cells = <0>;
935 #interrupt-cells = <1>;
936 reg = <0x180 0x80>;
937 compatible = "aspeed,ast2600-i2c-bus";
941 bus-frequency = <100000>;
942 pinctrl-names = "default";
943 pinctrl-0 = <&pinctrl_i2c3_default>;
947 i2c3: i2c-bus@200 {
948 #address-cells = <1>;
949 #size-cells = <0>;
950 #interrupt-cells = <1>;
951 reg = <0x200 0x80>;
952 compatible = "aspeed,ast2600-i2c-bus";
956 bus-frequency = <100000>;
957 pinctrl-names = "default";
958 pinctrl-0 = <&pinctrl_i2c4_default>;
962 i2c4: i2c-bus@280 {
963 #address-cells = <1>;
964 #size-cells = <0>;
965 #interrupt-cells = <1>;
966 reg = <0x280 0x80>;
967 compatible = "aspeed,ast2600-i2c-bus";
971 bus-frequency = <100000>;
972 pinctrl-names = "default";
973 pinctrl-0 = <&pinctrl_i2c5_default>;
977 i2c5: i2c-bus@300 {
978 #address-cells = <1>;
979 #size-cells = <0>;
980 #interrupt-cells = <1>;
981 reg = <0x300 0x80>;
982 compatible = "aspeed,ast2600-i2c-bus";
986 bus-frequency = <100000>;
987 pinctrl-names = "default";
988 pinctrl-0 = <&pinctrl_i2c6_default>;
992 i2c6: i2c-bus@380 {
993 #address-cells = <1>;
994 #size-cells = <0>;
995 #interrupt-cells = <1>;
996 reg = <0x380 0x80>;
997 compatible = "aspeed,ast2600-i2c-bus";
1001 bus-frequency = <100000>;
1002 pinctrl-names = "default";
1003 pinctrl-0 = <&pinctrl_i2c7_default>;
1007 i2c7: i2c-bus@400 {
1008 #address-cells = <1>;
1009 #size-cells = <0>;
1010 #interrupt-cells = <1>;
1011 reg = <0x400 0x80>;
1012 compatible = "aspeed,ast2600-i2c-bus";
1016 bus-frequency = <100000>;
1017 pinctrl-names = "default";
1018 pinctrl-0 = <&pinctrl_i2c8_default>;
1022 i2c8: i2c-bus@480 {
1023 #address-cells = <1>;
1024 #size-cells = <0>;
1025 #interrupt-cells = <1>;
1026 reg = <0x480 0x80>;
1027 compatible = "aspeed,ast2600-i2c-bus";
1031 bus-frequency = <100000>;
1032 pinctrl-names = "default";
1033 pinctrl-0 = <&pinctrl_i2c9_default>;
1037 i2c9: i2c-bus@500 {
1038 #address-cells = <1>;
1039 #size-cells = <0>;
1040 #interrupt-cells = <1>;
1041 reg = <0x500 0x80>;
1042 compatible = "aspeed,ast2600-i2c-bus";
1046 bus-frequency = <100000>;
1047 pinctrl-names = "default";
1048 pinctrl-0 = <&pinctrl_i2c10_default>;
1052 i2c10: i2c-bus@580 {
1053 #address-cells = <1>;
1054 #size-cells = <0>;
1055 #interrupt-cells = <1>;
1056 reg = <0x580 0x80>;
1057 compatible = "aspeed,ast2600-i2c-bus";
1061 bus-frequency = <100000>;
1062 pinctrl-names = "default";
1063 pinctrl-0 = <&pinctrl_i2c11_default>;
1067 i2c11: i2c-bus@600 {
1068 #address-cells = <1>;
1069 #size-cells = <0>;
1070 #interrupt-cells = <1>;
1071 reg = <0x600 0x80>;
1072 compatible = "aspeed,ast2600-i2c-bus";
1076 bus-frequency = <100000>;
1077 pinctrl-names = "default";
1078 pinctrl-0 = <&pinctrl_i2c12_default>;
1082 i2c12: i2c-bus@680 {
1083 #address-cells = <1>;
1084 #size-cells = <0>;
1085 #interrupt-cells = <1>;
1086 reg = <0x680 0x80>;
1087 compatible = "aspeed,ast2600-i2c-bus";
1091 bus-frequency = <100000>;
1092 pinctrl-names = "default";
1093 pinctrl-0 = <&pinctrl_i2c13_default>;
1097 i2c13: i2c-bus@700 {
1098 #address-cells = <1>;
1099 #size-cells = <0>;
1100 #interrupt-cells = <1>;
1101 reg = <0x700 0x80>;
1102 compatible = "aspeed,ast2600-i2c-bus";
1106 bus-frequency = <100000>;
1107 pinctrl-names = "default";
1108 pinctrl-0 = <&pinctrl_i2c14_default>;
1112 i2c14: i2c-bus@780 {
1113 #address-cells = <1>;
1114 #size-cells = <0>;
1115 #interrupt-cells = <1>;
1116 reg = <0x780 0x80>;
1117 compatible = "aspeed,ast2600-i2c-bus";
1121 bus-frequency = <100000>;
1122 pinctrl-names = "default";
1123 pinctrl-0 = <&pinctrl_i2c15_default>;
1127 i2c15: i2c-bus@800 {
1128 #address-cells = <1>;
1129 #size-cells = <0>;
1130 #interrupt-cells = <1>;
1131 reg = <0x800 0x80>;
1132 compatible = "aspeed,ast2600-i2c-bus";
1136 bus-frequency = <100000>;
1137 pinctrl-names = "default";
1138 pinctrl-0 = <&pinctrl_i2c16_default>;