Lines Matching +full:lpc +full:- +full:interrupts
1 // SPDX-License-Identifier: GPL-2.0-or-later
4 #include <dt-bindings/interrupt-controller/arm-gic.h>
5 #include <dt-bindings/interrupt-controller/aspeed-scu-ic.h>
6 #include <dt-bindings/clock/ast2600-clock.h>
11 #address-cells = <1>;
12 #size-cells = <1>;
13 interrupt-parent = <&gic>;
47 #address-cells = <1>;
48 #size-cells = <0>;
49 enable-method = "aspeed,ast2600-smp";
52 compatible = "arm,cortex-a7";
58 compatible = "arm,cortex-a7";
65 compatible = "arm,armv7-timer";
66 interrupt-parent = <&gic>;
67 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
72 arm,cpu-registers-not-fw-configured;
73 always-on;
77 compatible = "aspeed,ast2600-sdram-edac", "syscon";
79 interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
83 compatible = "simple-bus";
84 #address-cells = <1>;
85 #size-cells = <1>;
89 gic: interrupt-controller@40461000 {
90 compatible = "arm,cortex-a7-gic";
91 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
92 #interrupt-cells = <3>;
93 interrupt-controller;
94 interrupt-parent = <&gic>;
102 compatible = "aspeed,ast2600-ahbc", "syscon";
108 #address-cells = <1>;
109 #size-cells = <0>;
110 compatible = "aspeed,ast2600-fmc";
113 interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
116 compatible = "jedec,spi-nor";
117 spi-max-frequency = <50000000>;
118 spi-rx-bus-width = <2>;
123 compatible = "jedec,spi-nor";
124 spi-max-frequency = <50000000>;
125 spi-rx-bus-width = <2>;
130 compatible = "jedec,spi-nor";
131 spi-max-frequency = <50000000>;
132 spi-rx-bus-width = <2>;
139 #address-cells = <1>;
140 #size-cells = <0>;
141 compatible = "aspeed,ast2600-spi";
146 compatible = "jedec,spi-nor";
147 spi-max-frequency = <50000000>;
148 spi-rx-bus-width = <2>;
153 compatible = "jedec,spi-nor";
154 spi-max-frequency = <50000000>;
155 spi-rx-bus-width = <2>;
162 #address-cells = <1>;
163 #size-cells = <0>;
164 compatible = "aspeed,ast2600-spi";
169 compatible = "jedec,spi-nor";
170 spi-max-frequency = <50000000>;
171 spi-rx-bus-width = <2>;
176 compatible = "jedec,spi-nor";
177 spi-max-frequency = <50000000>;
178 spi-rx-bus-width = <2>;
183 compatible = "jedec,spi-nor";
184 spi-max-frequency = <50000000>;
185 spi-rx-bus-width = <2>;
191 compatible = "aspeed,ast2600-mdio";
193 #address-cells = <1>;
194 #size-cells = <0>;
196 pinctrl-names = "default";
197 pinctrl-0 = <&pinctrl_mdio1_default>;
202 compatible = "aspeed,ast2600-mdio";
204 #address-cells = <1>;
205 #size-cells = <0>;
207 pinctrl-names = "default";
208 pinctrl-0 = <&pinctrl_mdio2_default>;
213 compatible = "aspeed,ast2600-mdio";
215 #address-cells = <1>;
216 #size-cells = <0>;
218 pinctrl-names = "default";
219 pinctrl-0 = <&pinctrl_mdio3_default>;
224 compatible = "aspeed,ast2600-mdio";
226 #address-cells = <1>;
227 #size-cells = <0>;
229 pinctrl-names = "default";
230 pinctrl-0 = <&pinctrl_mdio4_default>;
235 compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
237 #address-cells = <1>;
238 #size-cells = <0>;
239 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
245 compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
247 #address-cells = <1>;
248 #size-cells = <0>;
249 interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
255 compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
257 #address-cells = <1>;
258 #size-cells = <0>;
259 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
265 compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
267 #address-cells = <1>;
268 #size-cells = <0>;
269 interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
275 compatible = "aspeed,ast2600-ehci", "generic-ehci";
277 interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
279 pinctrl-names = "default";
280 pinctrl-0 = <&pinctrl_usb2ah_default>;
285 compatible = "aspeed,ast2600-ehci", "generic-ehci";
287 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
289 pinctrl-names = "default";
290 pinctrl-0 = <&pinctrl_usb2bh_default>;
295 compatible = "aspeed,ast2600-uhci", "generic-uhci";
297 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
307 vhub: usb-vhub@1e6a0000 {
308 compatible = "aspeed,ast2600-usb-vhub";
310 interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
312 aspeed,vhub-downstream-ports = <7>;
313 aspeed,vhub-generic-endpoints = <21>;
314 pinctrl-names = "default";
315 pinctrl-0 = <&pinctrl_usb2ad_default>;
320 compatible = "aspeed,ast2600-udc";
322 interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
324 pinctrl-names = "default";
325 pinctrl-0 = <&pinctrl_usb2bd_default>;
330 compatible = "simple-bus";
331 #address-cells = <1>;
332 #size-cells = <1>;
336 compatible = "aspeed,ast2600-hace";
338 interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
344 compatible = "aspeed,ast2600-scu", "syscon", "simple-mfd";
347 #address-cells = <1>;
348 #size-cells = <1>;
349 #clock-cells = <1>;
350 #reset-cells = <1>;
353 compatible = "aspeed,ast2600-pinctrl";
356 silicon-id@14 {
357 compatible = "aspeed,ast2600-silicon-id", "aspeed,silicon-id";
361 smp-memram@180 {
362 compatible = "aspeed,ast2600-smpmem";
366 scu_ic0: interrupt-controller@560 {
367 #interrupt-cells = <1>;
368 compatible = "aspeed,ast2600-scu-ic0";
370 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
371 interrupt-controller;
374 scu_ic1: interrupt-controller@570 {
375 #interrupt-cells = <1>;
376 compatible = "aspeed,ast2600-scu-ic1";
378 interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
379 interrupt-controller;
391 compatible = "aspeed,ast2600-gfx", "syscon";
393 reg-io-width = <4>;
398 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
402 compatible = "aspeed,ast2600-xdma";
406 reset-names = "device", "root-complex";
407 interrupts-extended = <&gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
409 aspeed,pcie-device = "bmc";
415 compatible = "aspeed,ast2600-adc0";
419 interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
420 #io-channel-cells = <1>;
425 compatible = "aspeed,ast2600-adc1";
429 interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
430 #io-channel-cells = <1>;
434 sbc: secure-boot-controller@1e6f2000 {
435 compatible = "aspeed,ast2600-sbc";
440 compatible = "aspeed,ast2600-acry";
442 interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
448 compatible = "aspeed,ast2600-video-engine";
452 clock-names = "vclk", "eclk";
453 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
458 #gpio-cells = <2>;
459 gpio-controller;
460 compatible = "aspeed,ast2600-gpio";
462 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
463 gpio-ranges = <&pinctrl 0 0 208>;
466 interrupt-controller;
467 #interrupt-cells = <2>;
471 #gpio-cells = <2>;
472 gpio-controller;
473 compatible = "aspeed,ast2600-sgpiom";
475 interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
477 interrupt-controller;
478 bus-frequency = <12000000>;
479 pinctrl-names = "default";
480 pinctrl-0 = <&pinctrl_sgpm1_default>;
485 #gpio-cells = <2>;
486 gpio-controller;
487 compatible = "aspeed,ast2600-sgpiom";
489 interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
491 interrupt-controller;
492 bus-frequency = <12000000>;
493 pinctrl-names = "default";
494 pinctrl-0 = <&pinctrl_sgpm2_default>;
499 #gpio-cells = <2>;
500 gpio-controller;
501 compatible = "aspeed,ast2600-gpio";
503 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
504 gpio-ranges = <&pinctrl 0 208 36>;
507 interrupt-controller;
508 #interrupt-cells = <2>;
512 compatible = "aspeed,ast2600-rtc";
514 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
519 compatible = "aspeed,ast2600-timer";
521 interrupts-extended = <&gic GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
530 clock-names = "PCLK";
537 reg-shift = <2>;
538 reg-io-width = <4>;
539 interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
542 no-loopback-test;
543 pinctrl-names = "default";
544 pinctrl-0 = <&pinctrl_txd1_default &pinctrl_rxd1_default>;
551 reg-shift = <2>;
552 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
554 no-loopback-test;
558 compatible = "aspeed,ast2600-wdt";
563 compatible = "aspeed,ast2600-wdt";
569 compatible = "aspeed,ast2600-wdt";
575 compatible = "aspeed,ast2600-wdt";
580 peci0: peci-controller@1e78b000 {
581 compatible = "aspeed,ast2600-peci";
583 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
586 cmd-timeout-ms = <1000>;
587 clock-frequency = <1000000>;
591 lpc: lpc@1e789000 { label
592 compatible = "aspeed,ast2600-lpc-v2", "simple-mfd", "syscon";
594 reg-io-width = <4>;
596 #address-cells = <1>;
597 #size-cells = <1>;
601 compatible = "aspeed,ast2500-kcs-bmc-v2";
603 interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
610 compatible = "aspeed,ast2500-kcs-bmc-v2";
612 interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
618 compatible = "aspeed,ast2500-kcs-bmc-v2";
620 interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
626 compatible = "aspeed,ast2500-kcs-bmc-v2";
628 interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
633 lpc_ctrl: lpc-ctrl@80 {
634 compatible = "aspeed,ast2600-lpc-ctrl";
640 lpc_snoop: lpc-snoop@80 {
641 compatible = "aspeed,ast2600-lpc-snoop";
643 interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
649 compatible = "aspeed,ast2600-lhc";
653 lpc_reset: reset-controller@98 {
654 compatible = "aspeed,ast2600-lpc-reset";
656 #reset-cells = <1>;
659 uart_routing: uart-routing@98 {
660 compatible = "aspeed,ast2600-uart-routing";
666 compatible = "aspeed,ast2600-ibt-bmc";
668 interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
675 compatible = "aspeed,ast2600-sd-controller";
677 #address-cells = <1>;
678 #size-cells = <1>;
684 compatible = "aspeed,ast2600-sdhci", "sdhci";
686 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
687 sdhci,auto-cmd12;
693 compatible = "aspeed,ast2600-sdhci", "sdhci";
695 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
696 sdhci,auto-cmd12;
703 compatible = "aspeed,ast2600-sd-controller";
705 #address-cells = <1>;
706 #size-cells = <1>;
712 compatible = "aspeed,ast2600-sdhci";
714 sdhci,auto-cmd12;
715 interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
717 pinctrl-names = "default";
718 pinctrl-0 = <&pinctrl_emmc_default>;
723 compatible = "aspeed,ast2500-vuart";
725 reg-shift = <2>;
726 interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
728 no-loopback-test;
733 compatible = "aspeed,ast2500-vuart";
735 reg-shift = <2>;
736 interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
738 no-loopback-test;
743 compatible = "aspeed,ast2500-vuart";
745 reg-shift = <2>;
746 interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
748 no-loopback-test;
753 compatible = "aspeed,ast2500-vuart";
755 reg-shift = <2>;
756 interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
758 no-loopback-test;
765 reg-shift = <2>;
766 reg-io-width = <4>;
767 interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
770 no-loopback-test;
771 pinctrl-names = "default";
772 pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
779 reg-shift = <2>;
780 reg-io-width = <4>;
781 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
784 no-loopback-test;
785 pinctrl-names = "default";
786 pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>;
793 reg-shift = <2>;
794 reg-io-width = <4>;
795 interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
798 no-loopback-test;
799 pinctrl-names = "default";
800 pinctrl-0 = <&pinctrl_txd4_default &pinctrl_rxd4_default>;
807 reg-shift = <2>;
808 reg-io-width = <4>;
809 interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
811 no-loopback-test;
812 pinctrl-names = "default";
813 pinctrl-0 = <&pinctrl_uart6_default>;
821 reg-shift = <2>;
822 reg-io-width = <4>;
823 interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
825 no-loopback-test;
826 pinctrl-names = "default";
827 pinctrl-0 = <&pinctrl_uart7_default>;
835 reg-shift = <2>;
836 reg-io-width = <4>;
837 interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
839 no-loopback-test;
840 pinctrl-names = "default";
841 pinctrl-0 = <&pinctrl_uart8_default>;
849 reg-shift = <2>;
850 reg-io-width = <4>;
851 interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
853 no-loopback-test;
854 pinctrl-names = "default";
855 pinctrl-0 = <&pinctrl_uart9_default>;
861 compatible = "simple-bus";
862 #address-cells = <1>;
863 #size-cells = <1>;
868 compatible = "aspeed,ast2600-fsi-master", "fsi-master";
870 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
871 pinctrl-names = "default";
872 pinctrl-0 = <&pinctrl_fsi1_default>;
878 compatible = "aspeed,ast2600-fsi-master", "fsi-master";
880 interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
881 pinctrl-names = "default";
882 pinctrl-0 = <&pinctrl_fsi2_default>;
887 udma: dma-controller@1e79e000 {
888 compatible = "aspeed,ast2600-udma";
890 interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
891 dma-channels = <28>;
892 #dma-cells = <1>;
899 #include "aspeed-g6-pinctrl.dtsi"
902 i2c0: i2c-bus@80 {
903 #address-cells = <1>;
904 #size-cells = <0>;
905 #interrupt-cells = <1>;
907 compatible = "aspeed,ast2600-i2c-bus";
910 interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
911 bus-frequency = <100000>;
912 pinctrl-names = "default";
913 pinctrl-0 = <&pinctrl_i2c1_default>;
917 i2c1: i2c-bus@100 {
918 #address-cells = <1>;
919 #size-cells = <0>;
920 #interrupt-cells = <1>;
922 compatible = "aspeed,ast2600-i2c-bus";
925 interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
926 bus-frequency = <100000>;
927 pinctrl-names = "default";
928 pinctrl-0 = <&pinctrl_i2c2_default>;
932 i2c2: i2c-bus@180 {
933 #address-cells = <1>;
934 #size-cells = <0>;
935 #interrupt-cells = <1>;
937 compatible = "aspeed,ast2600-i2c-bus";
940 interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
941 bus-frequency = <100000>;
942 pinctrl-names = "default";
943 pinctrl-0 = <&pinctrl_i2c3_default>;
947 i2c3: i2c-bus@200 {
948 #address-cells = <1>;
949 #size-cells = <0>;
950 #interrupt-cells = <1>;
952 compatible = "aspeed,ast2600-i2c-bus";
955 interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
956 bus-frequency = <100000>;
957 pinctrl-names = "default";
958 pinctrl-0 = <&pinctrl_i2c4_default>;
962 i2c4: i2c-bus@280 {
963 #address-cells = <1>;
964 #size-cells = <0>;
965 #interrupt-cells = <1>;
967 compatible = "aspeed,ast2600-i2c-bus";
970 interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
971 bus-frequency = <100000>;
972 pinctrl-names = "default";
973 pinctrl-0 = <&pinctrl_i2c5_default>;
977 i2c5: i2c-bus@300 {
978 #address-cells = <1>;
979 #size-cells = <0>;
980 #interrupt-cells = <1>;
982 compatible = "aspeed,ast2600-i2c-bus";
985 interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
986 bus-frequency = <100000>;
987 pinctrl-names = "default";
988 pinctrl-0 = <&pinctrl_i2c6_default>;
992 i2c6: i2c-bus@380 {
993 #address-cells = <1>;
994 #size-cells = <0>;
995 #interrupt-cells = <1>;
997 compatible = "aspeed,ast2600-i2c-bus";
1000 interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
1001 bus-frequency = <100000>;
1002 pinctrl-names = "default";
1003 pinctrl-0 = <&pinctrl_i2c7_default>;
1007 i2c7: i2c-bus@400 {
1008 #address-cells = <1>;
1009 #size-cells = <0>;
1010 #interrupt-cells = <1>;
1012 compatible = "aspeed,ast2600-i2c-bus";
1015 interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
1016 bus-frequency = <100000>;
1017 pinctrl-names = "default";
1018 pinctrl-0 = <&pinctrl_i2c8_default>;
1022 i2c8: i2c-bus@480 {
1023 #address-cells = <1>;
1024 #size-cells = <0>;
1025 #interrupt-cells = <1>;
1027 compatible = "aspeed,ast2600-i2c-bus";
1030 interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
1031 bus-frequency = <100000>;
1032 pinctrl-names = "default";
1033 pinctrl-0 = <&pinctrl_i2c9_default>;
1037 i2c9: i2c-bus@500 {
1038 #address-cells = <1>;
1039 #size-cells = <0>;
1040 #interrupt-cells = <1>;
1042 compatible = "aspeed,ast2600-i2c-bus";
1045 interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
1046 bus-frequency = <100000>;
1047 pinctrl-names = "default";
1048 pinctrl-0 = <&pinctrl_i2c10_default>;
1052 i2c10: i2c-bus@580 {
1053 #address-cells = <1>;
1054 #size-cells = <0>;
1055 #interrupt-cells = <1>;
1057 compatible = "aspeed,ast2600-i2c-bus";
1060 interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
1061 bus-frequency = <100000>;
1062 pinctrl-names = "default";
1063 pinctrl-0 = <&pinctrl_i2c11_default>;
1067 i2c11: i2c-bus@600 {
1068 #address-cells = <1>;
1069 #size-cells = <0>;
1070 #interrupt-cells = <1>;
1072 compatible = "aspeed,ast2600-i2c-bus";
1075 interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
1076 bus-frequency = <100000>;
1077 pinctrl-names = "default";
1078 pinctrl-0 = <&pinctrl_i2c12_default>;
1082 i2c12: i2c-bus@680 {
1083 #address-cells = <1>;
1084 #size-cells = <0>;
1085 #interrupt-cells = <1>;
1087 compatible = "aspeed,ast2600-i2c-bus";
1090 interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
1091 bus-frequency = <100000>;
1092 pinctrl-names = "default";
1093 pinctrl-0 = <&pinctrl_i2c13_default>;
1097 i2c13: i2c-bus@700 {
1098 #address-cells = <1>;
1099 #size-cells = <0>;
1100 #interrupt-cells = <1>;
1102 compatible = "aspeed,ast2600-i2c-bus";
1105 interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
1106 bus-frequency = <100000>;
1107 pinctrl-names = "default";
1108 pinctrl-0 = <&pinctrl_i2c14_default>;
1112 i2c14: i2c-bus@780 {
1113 #address-cells = <1>;
1114 #size-cells = <0>;
1115 #interrupt-cells = <1>;
1117 compatible = "aspeed,ast2600-i2c-bus";
1120 interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
1121 bus-frequency = <100000>;
1122 pinctrl-names = "default";
1123 pinctrl-0 = <&pinctrl_i2c15_default>;
1127 i2c15: i2c-bus@800 {
1128 #address-cells = <1>;
1129 #size-cells = <0>;
1130 #interrupt-cells = <1>;
1132 compatible = "aspeed,ast2600-i2c-bus";
1135 interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
1136 bus-frequency = <100000>;
1137 pinctrl-names = "default";
1138 pinctrl-0 = <&pinctrl_i2c16_default>;