Lines Matching refs:defined
77 The modulation can be one of the types defined by enum :c:type:`fe_modulation`.
83 supported by each delivery system, as currently defined by specs.
108 defined currently at the Kernel. The reason is simple: no driver
164 The acceptable values are defined by :c:type:`fe_spectral_inversion`.
192 The acceptable values are defined by :c:type:`fe_code_rate`.
207 The acceptable values are defined by :c:type:`fe_sec_voltage`.
227 The acceptable values are defined by :c:type:`fe_pilot`.
239 The acceptable values are defined by :c:type:`fe_rolloff`.
273 The acceptable values are defined by :c:type:`fe_delivery_system`.
440 defined by :c:type:`fe_code_rate`.
454 The modulation used by a given ISDB Layer, as defined by
721 The acceptable values are defined by :c:type:`atscmh_rs_frame_mode`.
733 The acceptable values are defined by :c:type:`atscmh_rs_frame_ensemble`.
745 The acceptable values are defined by :c:type:`atscmh_rs_code_mode`.
757 The acceptable values are defined by :c:type:`atscmh_rs_code_mode`.
769 The acceptable values are defined by :c:type:`atscmh_sccc_block_mode`.
781 The acceptable values are defined by :c:type:`atscmh_sccc_code_mode`.
837 The acceptable values are defined by :c:type:`fe_transmit_mode`.
847 The acceptable values are defined by :c:type:`fe_transmit_mode`.
855 The acceptable values are defined by :c:type:`fe_guard_interval`.
882 The acceptable values are defined by :c:type:`fe_transmit_mode`.
917 The acceptable values are defined by :c:type:`fe_hierarchy`.
966 The acceptable values are defined by :c:type:`fe_delivery_system`.
976 The acceptable values are defined by :c:type:`fe_interleaving`.
1007 layer scrambling sequence as defined in clause 5.5.4 of EN 302 307.