Lines Matching full:used

9 There are several different Digital TV parameters that can be used by
20 Used internally. A GET/SET operation for it won't change or return
105    delivery system enum value is used (SYS_DVBS2).
180 Used on cable and satellite delivery systems.
190 Used on cable and satellite delivery systems.
200 Used on satellite delivery systems.
202 The voltage is usually used with non-DiSEqC capable LNBs to switch the
215 Currently not used.
223 Used on DVB-S2.
235 Used on DVB-S2.
281 Used only on ISDB.
301 Used only on ISDB.
315 Used only on ISDB.
336 is used to help the demodulator to synchronize on the channel.
341 ``The DTV_ISDBT_SB_SUBCHANNEL_ID`` parameter is used to give the
352 Used only on ISDB.
370 Used only on ISDB.
387 Used only on ISDB.
405 Used only on ISDB.
417 In ISDB-Tsb only layer A is used, it can be 1 or 3 in ISDB-Tsb according
421 Only the values of the first 3 bits are used. Other bits will be silently ignored:
437 Used only on ISDB.
439 The Forward Error Correction mechanism used by a given ISDB Layer, as
452 Used only on ISDB.
454 The modulation used by a given ISDB Layer, as defined by
472 Used only on ISDB.
563 Used only on ISDB.
638 Used only on ATSC-MH.
642 FIC is used for relaying information to allow rapid service acquisition
653 Used only on ATSC-MH.
668 Used only on ATSC-MH.
680 Used only on ATSC-MH.
693 Used only on ATSC-MH.
705 Used only on ATSC-MH.
717 Used only on ATSC-MH.
729 Used only on ATSC-MH.
741 Used only on ATSC-MH.
753 Used only on ATSC-MH.
765 Used only on ATSC-MH.
777 Used only on ATSC-MH.
788 Used only on ATSC-MH.
801 Used only on ATSC-MH.
814 Used only on ATSC-MH.
835 Used on terrestrial transmissions.
845 Used on terrestrial transmissions.
862    #. Interval ``GUARD_INTERVAL_1_64`` is used only for DVB-C2.
863    #. Interval ``GUARD_INTERVAL_1_128`` is used for both DVB-C2 and DVB_T2.
865       used only for DVB-T2.
867       ``GUARD_INTERVAL_PN945`` are used only for DMTB at the present.
877 Used only on OFTM-based standards, e. g. DVB-T/T2, ISDB-T, DTMB.
880 carriers) used by the standard.
913 Used only on DVB-T and DVB-T2.
925 Used on DVB-C2, DVB-S2, DVB-T2 and ISDB-S.
958 introduction, FE_GET_INFO was used to determine a frontend type. A
974 Time interleaving to be used.
1004 Used on DVB-S2.
1010 it can be used to read the scrambling sequence index (EN 300 468 table 41).
1012 By default, gold scrambling sequence index 0 is used.